KNX Pro 2015

KNX
Plan for intelligent future safety

KNX Basics
Topics
What is KNX? KNX history / KNX association
KNX components KNX benefits
Savings KNX is green – energy efficiency
KNX installation SE KNX product portfolio
KNX operation/configuration KNX training
KNX applications at home KNX on the web
KNX applications in the office Summary

Schneider Electric – LSB02872 – 11.2012 2
What is KNX?

What is KNX?
The three letters “KNX” stands for:

…………………………………….
However….
●KNX is a bus system
●KNX is a world standard
●KNX brings building functions together
●KNX offers flexibility, safety, comfort and cost efficiency

KNX
The intelligent bus principle
Simply intelligent: an
installation bus carries
all control signals within
a building
KNX solution Conventional installation

● The bus carries out all functions ● Many seperate lines, meaning less
for maximum flexibility flexibility
● All functions can be changed and ● If a function has to be changed,
expanded at any time physical installation has to change
KNX history and the KNX association

KNX
Technology with future
Future-proof industry standard A successful system in figures
● KNX is established ● 389 members in 39 countries
● In Europe in the CENELEC EN ● At present, more than 7,000 certified
KNX guarantees that all
components are 50090 and CEN EN 13321-1 and product groups and 70,000 projects
compatible and future- 13321-2 standards have been implemented to date
proof ● Training and development of KNX are
● Internationally by the ISO/IEC
14543-3 standard supported by 351 partners from the
business and training establishments
● In China, it corresponds to the
GB/Z 20965 standard A strong partner for KNX solutions
● In the USA to the ANSI/ASHARE ● SE offers a complete assortment of
135 standard KNX products
● All KNX products from all ● From strong design of the control
manufacturer are certified by the interface through to all necessary DIN
KNX association rail system components

Goals of the KNX association
● Definition of testing and quality standards via working and expert groups (KNX specification)
● Technical hotline for manufacturers developing KNX compatible devices
● Issue of KNX trademark on the basis of specifications through KNC Certification
● National and international Standardization activities
● Promotion of training measures by certification of training centers
● Promotional activities (web site, trade fairs, brochure etc)
● Encouraging forming of national KNX groups
● Scientific partnership for technical institutes
● Rest specifications work/promotion/certification of legacy systems

Be part of an International Community - The world speaks KNX

Be part of an International Community - The world speaks KNX

We have a lot of busses
but only one standard
KNX is the world‘s open standard for house and building system
technology

KNX components

Components of the System
KNX
System devices and components Actuators

● Components to build the communicating ● Receives data (telegram) from the bus
network, e.g. power supply, couplers, ● Processes the information
KNX systems are interfaces
modular and flexible ● Execute the function
Sensors
● Receives an external command
(temperature, movement...)
● Transform it to KNX-information
● Sends the information as telegram on the
bus

KNX
System components – devices
System devices (selection)
● Power supply KNX logic module USB interface REG-K Line coupler IP Router
unit

KNX
System components – sensors
Sensors (selection)
KNX push-button Movement detector Room temperature Binary input Anemometer

control unit

KNX
System components – actuators
Actuators (selection)
Switch actuator Dimming actuator Heating actuator Blind actuator KNX DALI-Gateway

KNX
How do these KNX components interact
● System component
● power supply
● Sensor –
● 2gang push-button
● Actuator –
● switch actuator with manual mode

One Tool
the Engineering Tool Software ETS™
● One PC software tool for:

 Design
 Configuration
 Diagnostics
of all KNX certified products
● Tool is manufacturer, devices and application
independent – integrator can combine products of
different manufacturers and applications in one
Installation
● Onetime fee for the ETS-tool, no additional
costs for projecting and commissioning will be
charged
● Tool is extendable with customized Apps

KNX
Maximum flexibility thanks to ETS configuration
The KNX software One software for all utilities

● ETS is a manufacturer- Light control
independent installation tool
Shading
For any level of knowledge and for Heating, ventilation, air conditioning
all project sizes
Safety and security
● ETS allows all users of the KNX
system to achieve a perfect Energy management
working result Comfort functions and control
● For beginners as well as for of all applications
trained or experienced KNX Remote control and remote maintenance
partners or electricians Interface to additional or peripheral
● Support during all the phases of systems
the project

KNX Benefits

KNX
Are you ready for raising potentials?
Growing demands made on Flexible solutions are needed to
modern building technology ● increase comfort and security
● Comfort, security and flexibility ● decrease energy consumption
Today‘s comfort
solutions need to be ● A new energy awareness ● are open for future
energy-efficient
● New and mobile technology technological developments
trends
● Rising aspectations concerning
automated comfort solutions

KNX
Growing with customers‘ requirements
Combining current requirements into one system
Intelligent building
control simply Comfort (Easiness, Automatic, Scenes, Design)
implemented!
● Solutions that can be operated simply and straightforwardly
Flexibility (Planning, Installation, Adaptation, Use, Multi-vendor)
● Flexible installation that can be extended in stages thanks to the
modularity of the system
Cost efficiency (Energy efficiency, Adaptations, Maintenance)
● Minimum installation, refurbishment and extension times of the
system, maximizing availability of the buildings
Safety and security (Monitoring, Alarm, Fire load, Technology)
● Building technology that reacts in a fast and intelligent way and
at any time ensuring protection

KNX
Building functions handled by KNX
● Lighting control
● Heating, Cooling, Ventilation
● Blinds, shutters and other drives
● Safety and Security
● Alarming, Surveillance
● Energy Management
● Metering, Monitoring and Acting
● Gateways to other systems

KNX
Controlling & Monitoring of building functions
● Manually e.g. push-buttons
● Movement dependent
● Time dependent
● Brightness dependent
● Temperature dependent
● Weather dependent
● State (contact) dependent
● Mix/Other dependencies
● Locally/Centrally
● Individually/Group
● Scene control
● Multifunctional Displays
● Building management/SCADA-system
(Supervisory Control and Data Acquisition)
KNX
Advantages of modern building control with KNX
Low operating costs Flexibility and expandability

● By only activating loads when they are ● The installation can be adapted
actually needed operating costs of a to modified requirements of future
The more extensive the building can be reduced in the long developments at any time
application, the greater term
the efficiency ● Additional components can be
● By means of time profiles as well as integrated into the existing bus system
movement and presence detectors without requiring further installation
control is effected automatically work
Time savings Security
● By networking all components via a ● Availability of the installation secured
single bus thanks to worldwide KNX Standard
● The cable routing is simplified
● The complexity of the wiring is reduced
● The system is clearly comprehensible
and easy to expand

KNX Savings

Cost of installation
A look at the costs

30.000 Costs of
today`s
25.000 Installation
Costs of
20.000 KNX -
Installation
15.000
10.000
5.000
2.000
low middle high Functionality
€

Installation savings on LSC
Savings potential
Costs of
conventional
installation
Savings
Investment costs: 25%
Costs of
KNX -
installation
Operating costs: 75%
Time
Concept, idea, Construction
Planning Phase of utilization
financing phase
KNX
Changing the use of rooms and floors
Whether an office complex,
a private home or a hotel
● KNX structures can be adapted
KNX configurations can
and expanded in response to be changed easily and
change the use or modified inexpensively
partition positions without
requiring new installation cables
● This applies to retrofitting
individual functions just as much
as creating new central functions
● Quick, easy and inexpensive
change of functions with ETS

KNX
Profitability for your customers
Efficient and profitable for your customers
Potential savings are determined
by the depth of use
● What counts is the required range of
With KNX, it is possible
functions
to save up to 30%
operating costs in the ● KNX will very quickly make itself pay
long term if the functions go beyond those
possible from a conventional solution
● Beneath lower operating costs simple
scene functions can be implemented
more cost-effectively with KNX
● A change of use or an expansion of a
conventional installation is
complicated and expensive

Energy savings with KNX
● Energy Efficiency
● Closely connected with the KNX building
system engineering is the comfort of
controlling:
● Shutters and blinds
● Lighting system
● Heating system and air- conditioning
● Audio system and many more
● Furthermore this comfort brings energy
savings of up to 50% as new researches
documented
(Source: www.iia.hs-bremen.de/KNXEnergieeffizienz)

SeeTool
● A tool to calculate potential savings in buildings

● Verified and documented solutions
● Wiring diagrams, product info, user manual etc
● Shows the potential savings in a clear way

What are the savings estimated in SeeTool?
● Energy Total savings compared total energy consumed for lighting, heating &
cooling
● Electricity savings compared energy consumption for lighting
● Heating & Cooling savings compared energy consumption for heating &/or cooling
● CO2 savings compared CO2 emissions, dependent on defined

generation for energy production

KNX is GREEN
Efficiency is the success factor in modern buildings
Contemporary building
control has got to be easy
and intelligent

The demand for energy efficiency
● Today there is a high demand for more energy efficient buildings
● The directive 2002-91-EC states that all countries in Europe should have some kind of
energy labelling on their buildings
● The standard EN 15232 defines what kind of functions are mandatory to achieve an
energy efficient building
● KNX is an easy way to accomplish energy efficiency
Classification of functions Example of classification of

buildings (France)

Requests for different EE classes

Requests for different EE classes - cont

Requests for different EE classes - cont

KNX Topology & Installation

KNX
Three easy steps to a succesful project
1. Planning
● Identify the requirements the object must meet
● Ask relevant questions about the desired level of comfort, security and
power saving potential
● Summarize the results in a description of the functions
2. Application
● Compile the necessary system components and software applications for
all areas of the building and implement the KNX structure
● ETS software supports you by assigning the address automatically at your request
3. Commissioning
● Commission is divided into installation of the devices and system application
● The created project is then loaded into the devices
● The applied functions are compared with the requirements laid out in the functional
description upon delivery
● Thus you can ascertain whether the installation functions correctly

KNX topology
Twisted pair only
230V 8.
1. 1 Line = up to 64 devices Area 3...15 9. x.0.0
2. > 64 devices => New Line Area 2 6. 2.0.0
3. Connect 2 Lines = Line couplers

Area 1 1.0.0
4. Main line of the Area
4. 7.
5. 1 Area = up to 15 Lines
230V
6. > 15 Lines => New Area
1.1.0 1.2.0 1.15.0
7. Connect 2 Areas = Area couplers 3.
8. Area Line (Backbone) 1. 2. 5.
9. Up to 15 Areas 230V
1.1.1
230V 1.2.1
1.1.2 1.2.2
1.1.3 1.2.3
1.1.4 1.2.4
1.1.x 1.2.x
1.1.64 1.2.64

KNX topology
Twisted pair and Ethernet backbone
8. Switch/Router
1. 1 Line = up to 64 devices Area 3...15

2. > 64 devices => New Line Area 2 6. 2.0.0
3. Connect 2 Lines = Line couplers

Area 1 1.0.0
4. Main line of the Area
4. 7.
5. 1 Area = up to 15 Lines
230V
6. > 15 Lines => New Area
1.1.0 1.2.0 1.15.0
7. Connect 2 Areas = KNX/IP router 3.
Replaces Area Couplers
1. 2. 5.
8. Area Line (Ethernet backbone)
230V 230V 1.2.1
1.1.1
9. Up to 15 Areas
1.1.2 1.2.2
1.1.3 1.2.3
1.1.4 1.2.4
1.1.x 1.2.x
1.1.64 1.2.64

KNX topology
Twisted pair and Ethernet backbone
4.
Switch/Router
1. 1 Line = up to 64 devices
2. > 64 devices => New Line
3. Connect 2 Lines = KNX/IP router
Replaces Line Couplers
4. Backbone (Ethernet)
No Area Couplers needed
5. Addressing x.y.0 (x, y: 1..15) =
1.1.0 1.2.0 x.y.0
up to 225 lines 3.
5.
1. 2.
230V 230V 1.2.1
1.1.1
1.1.2 1.2.2
1.1.3 1.2.3
1.1.4 1.2.4
1.1.x 1.2.x
1.1.64 1.2.64

Topology - Structure in building
Only TP Line coupler replaced by IP Router
Area 2 Area 1 Area 2 Area 1

Line 1.5 Line 1.5
2.5 Floor 5 Line 2.5 Floor 5 Line
LC LC IP IP
Line 1.4 Line 1.4

2.4 Floor 4 Line 2.4 Floor 4 Line
LC LC IP IP
Line 1.3 Line 1.3

2.3 Line 2.3 Line
Main line 2.0
Main line 1.0
Floor 3 Floor 3
LAN
LAN
LC LC IP IP
Line 1. 2 Line 1. 2
2 .2 Floor 2 Line 2 .2 Floor 2 Line
LC LC IP IP
Line 1.1 Line 1.1

2.1
Floor 1 Line 2.1
Floor 1 Line
LC B B LC IP IP
C C
Backbone 0.0 LAN

Individual address
● Each KNX-device receives a unique address in the

system via parameterization (ETS)
● The individual address provides the device with a
name, i.e. a number
● It is divided into Area, Line and Device number: _ _ .
__.___
● Example:
Area Line Device
1.1.15
● The KNX device must be labelled with the individual

address when it has been programmed by ETS
● The individual address is used for programming and
service

Individual address
Backbone
BC BC
DVC DVC
1 15
1.0.>0 1.0.0 0.0.>0 15.0.0
Main line = line 0

CH
PSU
LC LC
1 15
CH
1.1.0
CH
1.15.0 BC = Backbone coupler
LC = Line coupler
PSU PSU
DVC
1
DVC
1
DVC = Bus device
1.1.1 1.15.1
F = functional area
L = Line
DVC DVC D = Bus device
63 63
1.1.63 1.15.63
Line 1 Line 15
F F F F L L L L D D D D D D D D

Coupling unit; types and functions
Backbone
BC BC
DVC DVC
1 15
1.0.>0 1.0.0 0.0.>0 15.0.0
Main line = line 0
Main line = line 0
LC
1 LC
1.1.0 1
15.1.0
Max. DVC
64 1 DVC
1.1.1 1
15.1.1
DVC
63 DVC
1.1.63 63
15.1.63
LR 1.1.64 LR 1.1.128 LR 1.1.0192

BC = Backbone coupler
3x DVC
1.1.65
DVC
1.1.129
DVC
1.1.193
LC = Line coupler
65 129 193
Max. LR = Line repeater
64
DVC DVC DVC DVC = Bus device
1.1.127 1.1.191 1.1.255
127 191 255

KNX
Connection example
Topology within one
bus line
● Free topology (mix of line,
tree and star, but no loop)
● max. 64 bus devices
● max. 1000 m bus cable
● max. 350 m between
power supply and device
● min. 200 m between two
power supplies

Bus cable installation (twisted pair, TP)
Free topology
● The topologies line, star and tree can be combined

● Rings have to be avoided
● KNX does not require terminating resistors
Line
Star
Tree

Bus cable
● Data transfer and power supply via 2 twisted wires (red/black)

● Spare pair (yellow/white), usable for example for extra power supply or cable
breakdown supervision
● Installation together with 230/400 V permitted
● Schneider Electric strongly recommends using an KNX/EIB-certified bus cable, for
example:
Type Structure Cabling
YCYM KNXA guideline (Basis: DIN VDE 0207 and 0815) Fixed cabling: in dry, damp and wet rooms, for surface
2 x 2 x 0.8 Cores: red (+EIB) mounting, flush mounting, in pipes. Outdoors, if
black (-EIB) protected from direct sunlight.
yellow (free)
white (free)
J-Y (St) Y DIN VDE 0815 Fixed cabling: in dry and damp operating areas,
2 x 2 x 0.8 Cores: red (+EIB) surface mounting, flush mounting, in pipes outdoors, in
EIB version black (-EIB) and beneath plaster.
yellow (free)
white (free)
SELV Safety Extra Low Voltage Network
SELV network

Bus cable installation
● SELV System allows installation close to mains

● It is allowed to install the bus cable in the same pipe as
power cables / min 19 mm pipes
● Bus and power cable cores may be present in the same
installation box if the safety separation of the bus and
power cable cores in the installation box is guaranteed
by the installation.
E.g. boxes with fixed terminals or partition wall
KNX KNX KNX
Fig. 2: Distance between KNX cable and mains

Bus cable installation
The metal foil shield is Example of labelling: KNX line 1.1 Example of connection of a
removed. The shield/drain wires push-button interface
The drain wire and the yellow/white wires (unless they are used)
are not earthed and are not
are bent back and isolated (not cutted)
integrated in the equipotential
bonding.
The shields are not
interconnected in the cable run
either.
Source: KNX Handbook, section 6.6

Bus connection terminal/
Spare pair branch terminal
Red/Black
● Supplied with almost all bus devices
● Disconnection of device without breaking the bus line
● 4 plug-in terminals per wire
● Can be used for branch off in a conjunction box
Yellow/White
● Branch terminal for the spare pair
● 4 plug-in terminals per wire

Checking an installation
Check whether permitted cable lengths have been observed

Run a visual check of the marking of the bus cable ends
Check installation for inadmissible cable connections
Measure the insulation resistance of the bus cables
Check polarity of all bus devices
Measure voltage at each bus cable end (minimum 21 V DC)
Record your test results

KNX operation and configuration

Necessary for design and commissioning
● Product database
Contains the application programs which finally
shall be downloaded into the products.
For free at: www.schneider-electric.com
● ETS (Engineering Tool Software)

The tool to design and commission the KNX-
project. The product database must first be
imported into ETS.
Purchase at: www.knx.org
● KNX-products
When the design is finished the configuration
data are downloaded into the products

Configuration steps
In the ETS
● Insertion of products in the project

● Assignment of individual addresses (physical
addresses) to the different devices (for the
unique identification of a sensor or actuator in a
KNX installation);
● Selection and setting (parameterization) of the
appropriate application software for sensors
and actuators
● Assignment of group addresses (for linking the
functions of sensors and actuators).
● Download of the settings into the devices
Parameter settings of Switch actuator 4-gang with

current detection
Bus access and data exchange
● KNX is a decentralized and event-controlled bus

system, i.e. no central unit, and the bus is idle (free)
if nothing happens or changes
● All connected bus devices can exchange data
between each other, packed into telegrams and sent
over the bus (serial transmission of “1” and “0”), e.g.
from a sensor (the command output) to one or more
actuators (the command receiver).
● CSMA/CA (Carrier Sense Multiple Access / Collision
Avoidance) is used for bus access and collision
handling
● Transmission rate: 9600 bit/s
● Average transmission time for sending and
confirmation of a telegram is approx. 25 ms

Practical example
Physical connections - cable
1.1.2
1.1.1
Lamp 1
Lamp 2
Lamp 3
Lamp 4

Practical example
Logical connections - software inside the products
Push-button 2-gang Switch actuator 4-gang

Button 1 Switch object 1 Bit 1/1/1 1/1/1 Channel 1 Switch object 1 Bit
Command sender Command receivers

● When Button 1 is pressed a telegram with group address ● When telegram 1/1/1 comes to the actuator it will be
1/1/1 will be sent on the bus via the Switch object evaluated and control the relay of Channel 1. If the
● The function and thereby the value in the telegram is pre- value is 1 (ON) the relay will close and if the value is
defined in the parameters, e.g. toggle-function = the actual 0 (OFF) the relay will open.
object value is inverted and sent on the bus, i.e. every ● The actuator sends an acknowledge telegram
press sends alternately ON- and OFF-telegrams ● Other actuators and sensors which does not have the
● The telegram will be received by all the sensors and group address 1/1/1 assigned will not evaluate and
actuators on the bus acknowledge the telegram

TP1 Bit structure
„0“ and „1“ are the two logical states a bit can possess.
Logical state Technical logic in KNX TP1:

During a logic 1, no current drawn
During logic 0, current drawn
Signal voltage This implies that – when several

devices are sending simultaneously,
the one sending a „0“ may continue to
send

Telegram Collision
Bus device 1
Transmission from bus device 2 is aborted,

Bus device 2 and will be repeated after a delay
On the bus
The bus devices listen to the bus while transmitting.

As soon as a bus device with the logical state “1” detects the logical state “0” (=flow of current on
the line), it stops transmitting to give way to the other sending device.

Practical example
Group address, 3-level
● Group addresses are generated in order to determine the connections between the communications
objects = the name of a telegram
● The group address allocates the functions to be executed
● It is divided into a main group, a middle group and a subgroup. These are used for the unambiguous
allocation of the function.
Example:
Main group / Middle group / Sub group
Level / Function type / Function
1st floor / Lighting / Lamp group 1 On/Off
1 / 1 / 1
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 bits (32 768 addresses)
not
0-15 0-7 0-255
used

Practical example
Group address, 2-level
● In the software ETS it is possible to chose a 2-level group address notification.

● This format comes from the first generation of ETS, where this was the only format to use.
● Normally 3-level notification is used
Example:
Main group / Sub group
Level / Function
1st floor / Lamp group 1 On/Off
1 / 1
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 bits (32 768 addresses)

not
0-15 0-2047
used
Application example

KNX
Intelligent building control for all building types
● Greater
safety,
security,
comfort and
efficiency in all Flexibility and efficiency in offices and public Comfort, safety and security in
buildings
building types private homes
Automated building control perfectly adapted
to the behaviour of users ● Control convenience with high levels
of safety and security
And changed at any time in a straightforward
procedure without any major expense ● Intelligent light and scene control –
day and night

KNX
Offices – Perfect working conditions
Reception area
Individual office
Open-plan office
Conference room
● KNX solutions facilitate work and save energy

● Optimum working conditions can be achieved at any time
● Unnecessary energy consumption is prevented by
ensuring that loads are switched off automatically

KNX
Use Case – Reception
The perfect reception
● Building Management Functions
● Receive guests via TwinBus door
station
● Overview of where windows or Touch Panel 7“
doors are open with a touch
panel
● Switching off all loads at closing
time with the central OFF function
● Fault messages displayed
TwinBus
door station

KNX
Use Case – Individual office
Perfect surroundings for high
efficiency
● Individual Lighting & Climate control
● The right temperature,
ventilation and lighting in the KNX ARGUS presence
detector
workplace increases comfort and
working efficiency
● Individual climate control
● Deactivating all loads with
movement and brightness-
KNX push-button plus
dependent sensors saves energy with room temperature
costs control unit

KNX
Use Case – Open-plan office
Flexible lighting and temperature
control
● Automatic lighting & climate
control
KNX ARGUS presence
detector
● Control of light and temperature
in the different areas acoording to
time and presence
KNX CO2 air humidity
and temperature sensor ● Brightness dependent control to
ensure an ideal lighting situation
from morning to evening
● Comfort
● Guarantee air quality with CO2,
temperature and humidity sensor

KNX
Use Case – Conference room
Presentation mode at the
push of a button
● Scenes
● Lighting is dimmed in the entire
conference room Touch Panel 7“ KNX push-button plus
● Blinds and the presentation with room temperature
control unit, 2-gang
screen are lowered
● Sound system and the beamer
are activated
● Heating or air conditioning are
set

KNX
Private homes – Secure living comfort
Entrance area
Living room
Bedroom
Bathroom
● Increasing the quality of life by allowing everyday building

functions to be controlled easily, more comfortably as well
as more safely and cost-effectively

KNX
Use Case – Entrance area
Greater safety and security with
central functions
● Building Status & Central
Functions
● A touch panel in the entrance hall Touch Panel 7“
provides an overview of the building
status and allows central functions
● Lighting & Shutter Control
● Sensors detect storms or excessive
sunlight and automatically shutters
and blinds as protective measure
● Lighting control to simulate presence
during absence or longer holidays for
security reasons

KNX
Use Case – Living room
Individual living comfort
● Scenes
● All functions can be switched off
at the push of a button
● Every situation can be enhanced
KNX push-button with with an individual KNX scene
room temperature whether
control unit
● Playing games
● Watching TV or reading
● Activation of functions at the
same time
● Blinds are lowered
● Mood lighting is switched on
● The room is heated or air-
KNX push-button conditioned
KNX
Use Case – Bathroom
Your very own private spa area
● Comfort Scenes
● the room has the right
temperature
● the towel rail is warm
KNX push-button with
● the light is dimmed room temperature
control unit
● Climate control
● Time-controlled temperature
control to save heating costs

KNX
Use Case – Bedroom
Ideal conditions for good sleep
● Scenes
● Pressing a push-button to activate
the right lighting and let down the
blinds
Touch Panel 7“
● Climate control
● Reduction of temperature at night
time healthy climate
● Security
● A button next to the bed illuminates
the house and garden in case
unexpected visits

KNX
Use Case – KNX from Remote InSideControl
Control and visualize from everywhere

at any time
● Climate Control homeLYnk
● Activate heating or ventilation
according the needs everytime
● Security functions
● Detect undesired presence while
absence
● Energy Efficiency
● Be aware of excessive energy
consumption when it is not needed to
deactivate functions
U.Motion
Schneider Electric KNX Trainings

KNX trainings offered by Schneider Electric
KNX introduction Plan a KNX installation
(General presentation) (Electrical designers, SI)
2-3h 1 day
Initiation to KNX Presentation for:

KNX for sales force (hands-on for SI) Architects
(sales force, SI) 2 days End users
3-4h Other customized
Certification presentations
(SI)
5 days
Recommended path KNX Solution Training

Optional path Basic & Advanced
(hands-on for SI)
Plan a KNX installation
● Location: Schneider Electric Romania

● Bucharest or Cluj-Napoca
● Dates: on demand
● Duration:
● 1 days
● Prerequisite knowledge
● none
● Max. number of participants: 20

Plan a KNX installation
● Theoretical presentations and practical exercises

● All major disciplines are covered
● Switch, dimming, blind and temperature control, automatic
and manual control, central functions and scenes
● The participants will…
● Discover KNX solution
● learn the scope of Schneider KNX product range
● learn the main functions/features of products
● learn the easiness of saving energy with KNX
● learn how to plan a KNX instalation according to customer
demands (function description)
● learn how to plan a KNX instalation

Initiation to KNX

● Duration:
● 2 days
● Theoretical knowledge of KNX
● Up to 2 persons on each training set

Initiation to KNX
Get to know the KNX
● Mix between theoretical presentations and practical
exercises with original devices (approx 40% / 60%)
● Switch, dimming, blind and temperature control, central functions and scenes
● learn how to configure products with ETS
(function description)
● learn how to test, analyse and correct solutions
on live training panels using ETS

KNX Certification training

● Dates: see training catalogue
● Duration:
● 4-5 days
● Good English knowledge is mandatory

KNX ETS5 certification training
● Objectives
● To get the KNX Certification.
● This label means you have acquired the level to be able to build applications and projects.
● Content
● KNX Certification applications.
● KNX Certification possibilities.
● Hardware design.
● Software programming: ETS5.
● This course should be completed by
● KNX product and solution Basic
● KNX product and solution Advance

KNX Solution Training - Basic

● Duration:
● 2 days
● Theoretical knowledge of KNX

KNX Solution Training - Basic
Get to know the “Schneider KNX solution building stones”
● Switch, dimming, blind and temperature control, automatic
and manual control, central functions and scenes
● learn the scope of Schneider KNX product range
● learn how to configure products with ETS to create
solutions according to customer demands
● learn how to test, analyse and correct solutions
on live training panels using ETS

KNX Solution Training - Advanced

● Dates: On demand
● Duration:
● 5 days
● KNX Solution Training – Basic
● KNX Certification

KNX Solution Training - Advanced

● Focus
● Deeper knowledge of special KNX products
● Advanced solutions for lighting, blind and temperature control and monitoring
● learn how to use special features of the KNX products
● learn how to configure products with ETS to create
solutions according to customer demands

We have a lot of busses
but only one standard
Raul Vasvari
raul.vasvari@schneider-electric.com
+4 0752 267 250

KNX Pro 2015

Uploaded by

Document Informationclick to expand document informationKnx Pro 2015

Document Informationclick to expand document information

Copyright:

Available Formats

KNX Pro 2015

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

KNX Pro 2015

Uploaded by

Copyright:

Available Formats

KNX

Plan for intelligent future safety

KNX components KNX benefits

Savings KNX is green – energy efficiency

KNX installation SE KNX product portfolio

KNX operation/configuration KNX training

KNX applications at home KNX on the web

KNX applications in the office Summary

Schneider Electric – LSB02872 – 11.2012 3

The three letters “KNX” stands for:

Schneider Electric – LSB02872 – 11.2012 4

KNX solution Conventional installation

Schneider Electric – LSB02872 – 11.2012 6

Schneider Electric – LSB02872 – 11.2012 7

Schneider Electric – LSB02872 – 11.2012 8

Schneider Electric – LSB02872 – 11.2012 9

Schneider Electric – LSB02872 – 11.2012 10

Schneider Electric – LSB02872 – 11.2012 12

Schneider Electric – LSB02872 – 11.2012 13

System devices and components Actuators

Schneider Electric – LSB02872 – 11.2012 14

Schneider Electric – LSB02872 – 11.2012 15

KNX push-button Movement detector Room temperature Binary input Anemometer

Schneider Electric – LSB02872 – 11.2012 16

Schneider Electric – LSB02872 – 11.2012 17

Schneider Electric – LSB02872 – 11.2012 18

● One PC software tool for:

Schneider Electric – LSB02872 – 11.2012 19

The KNX software One software for all utilities

Schneider Electric – LSB02872 – 11.2012 20

Schneider Electric – LSB02872 – 11.2012 21

Schneider Electric – LSB02872 – 11.2012 22

Schneider Electric – LSB02872 – 11.2012 23

Schneider Electric – LSB02872 – 11.2012 24

Low operating costs Flexibility and expandability

Schneider Electric – LSB02872 – 11.2012 26

Schneider Electric – LSB02872 – 11.2012 27

A look at the costs

Schneider Electric – LSB02872 – 11.2012 28

Operating costs: 75%

Schneider Electric – LSB02872 – 11.2012 30

Schneider Electric – LSB02872 – 11.2012 31

Schneider Electric – LSB02872 – 11.2012 32

● A tool to calculate potential savings in buildings

Schneider Electric – LSB02872 – 11.2012 33

● CO2 savings compared CO2 emissions, dependent on defined

Schneider Electric – LSB02872 – 11.2012 34

Schneider Electric – LSB02872 – 11.2012 35

Classification of functions Example of classification of

Schneider Electric – LSB02872 – 11.2012 36

Schneider Electric – LSB02872 – 11.2012 37

Schneider Electric – LSB02872 – 11.2012 38

Schneider Electric – LSB02872 – 11.2012 39

Schneider Electric – LSB02872 – 11.2012 40

Schneider Electric – LSB02872 – 11.2012 41

1. 1 Line = up to 64 devices Area 3...15 9. x.0.0

2. > 64 devices => New Line Area 2 6. 2.0.0