Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

NEW Atlanta Duracon 2019

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

est.

1978
Ver. 10 May 2019
www.atlanta.ph

UV RESISTANT

Atlanta Industries, Inc. introduces its improved Gutter and


Downspout system made of uPVC which is best for draining
rainwater from roofs of houses and factories.

ADVANTAGES
Complete System
Gutter, downspout and full range of accesories including PVC Gutter Bracket and PVC Downspout clamp.

White color is built-in permanently, however it can be painted to any color desired using latex paint.

Clean, smooth and attractive appearance. Concealed brackets preserve the neatness and the clean line
of the gutter. The smooth surface contributes to a better water flow.
UV Resistant
The entire system is made from uPVC which incorporates an ultra-violet light inhibitor, formulated to
stand up to strong sunlight and resist embrittlement.
Maintenance Free
The rigid uPVC material will not corrode, chip, rust, blister, peel or wear away.
Easy To Install
It is lightweight and uses basic tools to install the gutter and downspout system.
A. Left End Cap A

B
B. Gutter Tube

C. Gutter Connector B
C
G D
D. Inside Corner H
B
F B
E. Right End Cap
I
E
F. Outside Corner

G. Internal Bracket I

H. Dropper Outlet J

L
I. 100º Elbow SH
GUTTER SYSTEM DOWNSPOUT SYSTEM
J. Downspout Clamp K Gutter Gutter Connector Downspout Tube Downspout Connector

SIZE SIZE SIZE SIZE


K. Downspout Tube J
12"x 8' 12"
2-1/2"x 4"x 8' 2-1/2"
L. Downspout Connector 18"x 8' 18"
3"x 4"x 8' 3"
26"x 8' 26"
M. 90º Elbow SH
J
Inside Corner Outside Corner Dropper Outlet 100º Elbow SH

SIZE SIZE SIZE SIZE


M
12" 12"
t 2-1/2" 2-1/2"
18" 18"
z 3" 3"
26" 26"
u v a
Left & Right End Cap Internal Bracket 90º Elbow SH Clamp
TECHNICAL
SIZE SIZE SIZE SIZE
DIMENSION w y
12"
2-1/2" 2-1/2"x 4"
18" 18"
3" 3"x 4"
26"
x

Size t u v w External Bracket Atlanta Low VOC PVC Cement Square to Round Adaptor Dropper Outlet Round
(in) (mm) (mm) (mm) (mm) SIZE SIZE SIZE SIZE

12 14 52 13 77 12" 100 cc 2" 2"


18 14 48 18 120 18" 200 cc 3" 3"
26 20 51 28 199 26" 400 cc 4" 4"

Size x y z a Note: For special production of any Fabricated Fittings please


(in) (mm) (mm) (mm) (mm) contact your assigned Atlanta Account Officer for more details.
12 79 89 14 1.7
18 100 103 15 1.8
26 157 198 18 2

INSTALLATION OF GUTTER AND ACCESSORIES INSTALLATION OF DROPPER OUTLET

1. Determine where 2. Put a mark on the 3. Cut-off marked 4. Insert dropper outlet
1. Measure the 2. Cut using a 3. Remove rough to place the dropper gutter. portion using a drill & Apply solvent cement
desired length. toothed saw. edges. outlet. or hack saw. and hold the assembly
for a min. of 15 sec.
INSTALLATION OF DROPPER OUTLET

3. Nail or screw the brackets


including the gutter to
supporting structures such
4. Attach the necessary fitting accesories such as gutter connector, as a fascia board.
end cap, inside and outside corner gutter using Atlanta Solvent Cement. 1. Install & align internal 2. Put a mark on the
(Hold assembly for 15 sec. before release.) bracket at a distance. gutter.

35th Flr. Atlanta Center Bldg., No. 31 Annapolis St. Greenhills, San Juan City
Tel. No.: 723-0781 to 88 | Fax No.: 744-4703 / 584-2997
Website: www.atlanta.ph Email Sales: marketing@atlanta.ph
Like Us on Facebook: atlantaindustriesincorporated
Subscribe to Our Youtube Channel: Atlanta Industries Inc.

You might also like