Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
85 views

Sample Computation

The document provides the results of computations for the development potential of a 42,611.44 sqm corner lot property with a C-2 commercial zoning classification. Key findings include: 1) An allowable maximum building footprint (AMBF) of 38,841.44 sqm, representing a permissible site occupancy (PSO) of 90%. 2) Requirements for a minimum 10% total open space land (TOSL), 2% minimum unobstructed surface area (USA), and 6% maximum impervious surface area (ISA). 3) A maximum gross floor area (GFA) of 153,401.18 sqm and total gross floor areas (TGFA) ranging from 204

Uploaded by

Janella Adriano Floranda
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
85 views

Sample Computation

The document provides the results of computations for the development potential of a 42,611.44 sqm corner lot property with a C-2 commercial zoning classification. Key findings include: 1) An allowable maximum building footprint (AMBF) of 38,841.44 sqm, representing a permissible site occupancy (PSO) of 90%. 2) Requirements for a minimum 10% total open space land (TOSL), 2% minimum unobstructed surface area (USA), and 6% maximum impervious surface area (ISA). 3) A maximum gross floor area (GFA) of 153,401.18 sqm and total gross floor areas (TGFA) ranging from 204

Uploaded by

Janella Adriano Floranda
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

A.

NBC Computation

PART I: RULE 7 & 8 – Implementation of P.D. No.1096 (1997 NBCP) and its 2004
Revised IRR
a) a Total Lot Area (TLA) 42,611.44 sqm ; (Type of Lot) Corner Lot
b) a metropolitan level commercial zoning classification Commercial
– 2 Zone (C-2), allowing a medium-rise building/structure for medium
to high intensity commercial structure and land use;
c) the deed of restrictions for the property and local ordinances
allows firewall and arcades for the property; and
d) direct access from a 15 meters wide road-right-of-way (RROW).

Development Reference in the Finding/s for Comparative Use


Potential to be Revised IRR of the
Determined National Building
Code (October
31,2007) (PD1096)

1. Is the C-2 Property Table VIII.G.7. Yes


of the minimum Suggested
recommended lot size? Minimum Lot Sizes, Minimum: 301.00 sq. meters, 14.00
Lot Dimensions and meters (w) x 21.50 meters (d)
Types by Use or
Occupancy

2. What is the general Table VII.1. Division C-2


classification of use/ Schedule of
character occupancy Principal, Accessory Government centers to house national,
allowed for the and Conditional regional or local offices in the area
proposed building Use/Occupancy of
structure? Building/Structure

3. What are the Table VIII.3. Road Right-of-Way (RROW) Width


required setbacks for Setbacks for (meters) – 20.00 to 24.00
the proposed Commercial*,
building/structure? Industrial,
Institutional and
Recreational Front – 5.00
Buildings
Side – 3.00

Rear – 3.00
4. What are the Table VIII.G.6. AMBF = 38,841.44 sqm
Allowable Maximum Minimum TOSL
Building Footprint Requirements by
(AMBF) and the Lot Type/Location
Maximum Allowable
Percentage of Site
Occupancy (PSO) if
the property is to be
developed with the
firewalls on 3 sides and
a court at the center of
the structure?

5. Check Against Table VIII.1. 𝑃𝑆𝑂 = AMBF / TLA


Maximum Allowable Reference Table of
Percentage of Site Maximum Allowable
Occupancy (PSO) PSO, Maximum
Allowable ISA, the AMBF = 38,841.44 sqm
MACA, the
TLA = 42,611.44 sqm
Minimum USA and
the TOSL by Type
of Land Use
PSO = 38,841.44 / 42,611.44
Zoning per Lot
PSO = 0.91152610066

PSO = 90%

6. What is the Building Table VII.2. Building Type of Building/Structure –


Height Limit (BHL) Height Limit (BHL) Commercial 2 (C-2)
by Type of Use or
Occupancy

Number of allowable storeys/floors


above established grade – 6

Meters above highest grade – 18.00


7. Check Application of Table VII.G.3. Not Applicable for C-2 Zoning
Angles/Slopes to Reference Table of Classification
satisfy Natural Light Angles/Slopes* To
and Ventilation Satisfy Natural Light
Requirements and Ventilation
Requirements
Along RROW and
Front Yards

8. What is the Table VIII.1. MinTOSL = (TLA – AMBF)


minimum TOSL, Reference Table of
maximum ISA, Maximum Allowable MinTOSL = (100% – PSO)
minimum USA, and PSO, Maximum
MACA? Allowable ISA, the
MACA, the
AMBF = 38,841.44 sqm
Minimum USA and
the TOSL by Type TLA = 42,611.44 sqm
of Land Use Zoning
per Lot PSO = 90%

MinTOSL = (42,611.44 - 38,841.44)

MinTOSL = 3,770 sqm

MinTOSL = (100% - 90%)

MinTOSL = 10%
MinUSA = Area of Front Yard

Y1 = Frontage

MinUSA = 939.74 sqm

MinUSA = 939.74 / TLA

MinUSA = 939.74 / 42,611.44

MinUSA = 0.02205

MinUSA = 2%

MaxISA = Area of Side Yard + Area of


Rear Yard

MaxISA = Y2 + Y3 + Y4

MaxISA = 2,830.26 sqm

MaxISA = 2,830.26 / TLA

MaxISA = 2,830.26 / 42,611.44

MaxISA = 0.066420

MaxISA = 6%
MACA = maxPSO + maxISA

MACA = AMBF + Y2 + Y3 + Y4

MACA = 38,841.44 + 2,830.26

MACA = 41,671.7 sqm

MACA = 41,671.7 / TLA

MACA = 41,671.7 / 42,611.44

MACA = 0.977946

MACA = 95%

9. What is the Table VII.G.1. MaxGFA = TLA x FLAR


Maximum Gross Floor Reference Table of
Area (GFA) and Total Floor to Lot Area FLAR DESTINATION RIGHTS – 3.60
Gross Floor Area Ratio (FLAR) up to 9.00 (at a 15-storey or 45.00 m
(TGFA)? Designations/Rights BHL)

TLA = 42,611.44

FLAR = 3.6

MaxGFA = 42,611.44 x 3.6

MaxGFA = 153,401.18 sqm


Based on MaxPSO and BHL,

MaxTGFA = maxPSO x BHL

MaxTGFA = AMBF x BHL

AMBF = 38,841.44 sqm.

BHL = 6 (Number of allowable


storeys)

MaxTGFA = 38,841.44 x 6

MaxTGFA = 233,048.64 sqm

Table VII.G.2. Based on MaxGFA,

Conversion Table of MaxTGFA = maxGFA x Conversion


Gross Floor Area Factor
(GFA) to Total
Gross Floor Area MaxGFA = 153,401.18 sqm
(TGFA)
C.F = 1.33

MaxTGFA = 153,401.18 x 1.33

MaxTGFA = 204,023.57 sqm

1. An AMBF of 38,841.44 sqm (from item 4)


2. A PSO of 90% (from item 5)
3. A Min. TOSL of 10% (from item 8)
4. A Min. USA of 2% (from item 8)
5. A Max. ISA of 6% (from item 8)
6. A MACA of 90% (from item 8)
7. A Max. GFA of 153,401.18 sqm (from item 9)
8. A Max. TGFA (Based on MaxPSO and BHL) of 233,048.64 sqm
(from item 9)
9. A Max. TGFA (Based on MaxGFA) of 204,023.57 sqm (from item 9)
10. A FLAR of 3.6 (from item 9)

You might also like