Eng Enerpac PDF

Africa
E325e
ENERPAC Middle East FZE
Tel: +971 (0)4 8872686 - Fax: +971 (0)4 8872687 E325e E325e
Australia
Actuant Australia Ltd.
Hydraulic Technology Worldwide Tel: +61 297 438 988 – Fax: +61 297 438 648
Brasil
Power Packer do Brasil Ltda.
Tel: +55 11 5687 2211 – Fax: +55 11 5686 5583
Toll Free:
Cylinders Tel: 0800 891 5770
Canada
Hydraulic Power
Page 6-65 Actuant Canada Corporation
Tel: +1 905 564 5749 – Fax: +1 905 564 0305
Toll Free:
Tel: +1 800 268 4987 – Fax: +1 800 461 2456
for all Industrial Applications
China
Actuant China Ltd.
Tel: +86 21 5866 9099 – Fax: +86 21 5866 7156
Tel: +86 10 845 36166 – Fax: +86 10 845 36220
Pumps Central and Eastern Europe, Greece
Applied Power International S.A.
Page 66-105 Tel: +31 318 535 936 – Fax: +31 318 535 951
France
Hydraulic Power for all Industrial Applications

ENERPAC
Une division de ACTUANT France s.a.
System Tel: +33 1 601 368 68 – Fax: +33 1 692 037 50
Germany, Austria and Switzerland
Components ENERPAC, GmbH

Tel: +49 211 471 490 – Fax: +49 211 471 49 28
India
Page 119-132 ENERPAC Hydraulics (India) Pvt. Ltd.
Tel: +91 22 2756 6090 – Fax: +91 22 2756 6095
Tel: +91 22 2756 6091
Italy
ENERPAC S.p.A.
Tel: +39 02 4861 111 – Fax: +39 02 4860 1288
Valves Japan
Applied Power Japan Ltd.
Tel: +81 48 662 4911 – Fax: +81 48 662 4955
Page 133-139 Middle East, Turkey and Caspian Sea

Tel: +971 (0)4 8872686 – Fax: +971 (0)4 8872687
Russia and CIS

(excl. Caspian Sea Countries)
Tel: +7-495-9809091 – Fax: +7-495-9809092
Presses Singapore
Actuant Asia Pte. Ltd.
Tel: +65 64 84 5108 – Fax: +65 64 84 5669
Tel: +65 64 84 3737
Page 140-149 Toll Free:
Tel: +1800 363 7722
South Korea
Actuant Korea Ltd.
Tel: +82 31 434 4506 – Fax: +82 31 434 4507
Spain and Portugal
Pullers ENERPAC
Tel: +34 91 661 11 25 – Fax: +34 91 661 47 89
The Netherlands, Belgium, Luxembourg, Sweden,

Page 150-163 Denmark, Norway, Finland and Baltic States
ENERPAC B.V.
Tel: +31 318 535 911 – Fax: +31 318 525 613
+31 318 535 848
United Kingdom and Ireland

ENERPAC Ltd.
Tel: +44 (0)121 50 50 787 – Fax: +44 (0)121 50 50 799
Tools USA, Latin America and Caribbean

ENERPAC
Tel: +1 262 781 6600 – Fax: +1 262 783 9562
Page 164-183
User inquiries:
+1 800 433 2766
Distributor inquiries/orders:
+1 800 558 0530
Bolting Tools For a complete list of addresses see page 218

or
internet: www.enerpac.com
Page 184-216 e-mail: info@enerpac.com
00750GB © Enerpac 01-2006

Printed in the Netherlands. www.actuant.com
Table of Contents Hydraulic Technology Worldwide Model Number Index Section Index

Page(s) Page(s) Page(s) Page(s)
Introduction P- and 11-Series, Pullers 150-163
The World Class Brand ............................ 4-5

Ultra-High Pressure Hand Pumps .... 76-77
PU-Series, Portable Economy Introduction ...................................... 150-151 A E N SPK . . . . . . . . . . . . . . 170
Cylinders
Electric Pumps .................................. 78-79 BHP-Series, Hydraulic Puller Sets .. 152-155 A5-A10 . . . . . . . . . 166 EBJ . . . . . . . . . . . . . . . . 61 NC . . . . . . . . . . . . . . . 186 SQD . . . . . . . . .194-197 Page 6-65
Cylinders (Hydraulic) 6-65 PE-Series, Submerged EP-Series, A12 . . . . . . . . . . . . . . . . 12 ELP . . . . . . . . 174-175 NV . . . . . . . . . . . . . . . . 132 STB . . . . . . . . 180-181
Electric Pumps .................................. 80-83 Mechanical Posi-Lock® Pullers .. 156-159 A13-A28 . . . . . . . . 166 EMB . . . . . . . . . . . . . 174 STC . . . . . . . . . . . . . . 178
Introduction .............................................. 6-7 Z-Class Introduction EPH-Series, A29-A53 . . . . . . . . . . 12 EP. . . . . . . . . . . . 156-159 P STF . . . . . . . . 187-188
RC-Series, Single-Acting Cylinders ....... 8-11 ZE3 - ZE6, ZU4-Series ...................... 84-85 Hydraulic Posi-Lock® Pullers ..... 160-162 A64-A66 . . . . . . . . 124 EPH . . . . . . . 160-163 P . . . . 63, 68, 70, 72 STN . . . . . . . . . . . . . . 186
and Accessories ..................................... 12 ZU4-Series, Electric Pumps ................. 86-89 EPH-Series, 100 ton Posi Lock® A92 . . . . . . . . 166, 177 EPHT . . . . . . . . . . . . 163 P142AL . . . . . . 62-63 STP . . . . . . . . . . . . . . 171
RAC-Series, Single-Acting
Aluminium Cylinders ........................ 14-15
ZE-Series, Electric Pumps.................... 90-95
PP-Series, Electric Pumps
Hydraulic Grip Pullers ......................... 163 A102 . . . . . . . . . . . . . . . 12 EPP . . . . . . . 157-159 P392AL . . . . . . 62-63 SW . . . . . . . . . . . . . . . 188 Pumps
A128-A192 . . . . . 166 EPT . . . . . . . . . . . . . . 160 P392FP . . . . . . . . . . . 75
RACL-Series, Single-Acting (8000- and 9000-Series) .................. 96-97 Tools 164-183 A183. . . . . . . . . . . . . . 146 EPX . . . . . . . . . . . . . . 159 PA . . . . . . . . . . . . . . . . 100 T Page 66-105
Aluminium Lock Nut Cylinders ......... 16-17 PA-Series, Turbo II Air Pumps ............. 98-99 A185 . . . . . . . 146, 166 ER . . . . . . . . . 174-175 PAH . . . . . . . 102-103 T . . . . . . . . . . . . 122-123
RACH-Series, Single-Acting, Aluminium PA-Series, Air Hydraulic Pumps ...... 100-101 Introduction ...................................... 164-165 A200R . . . . . . . . . . . 148 ES . . . . . . . . . . 174-175 PAM . . . . . . . . . . . . . 101 THC . . . . . . . . . . . . . 207
Hollow Plunger Cylinders.................. 18-19 PAH-Series, Air Hydraulic Pumps ... 102-103 MS-Series, Maintenance Sets ......... 166-169 A205-A220 . . . . . 146 PAMG . . . . . . . . 98-99 THQ . . . . . . . . . . . . . 207
RAR-Series, Double-Acting PGM-Series, Atlas Gasoline SP-Series, 35 Ton Hydraulic Punch 170-171 A218. . . . . . . . . . . . . . 166 F PATG . . . . . . . . . 98-99 TM . . . . . . . . . . . . . . . 149
Aluminium Cylinders ......................... 20-21 Powered Pumps ............................ 104-105 LW-Series, Lifting Wedge ........................ 172 A242-A305 . . . . . 166 F . . . . . . . . . . . . 123-124 PARG . . . . . . . . 98-99 TW . . . . . . . . . . . . . . . 189
CLP-Series, Single-Acting
Pancake Cylinders ........................... 22-23 Yellow Pages (Information Section) .106-118
SOH-Series, Hydraulic Machine Lifts ..... 173
ER-Series,
A310, A330. . . . . 146 FH . . . . . . . . . 123-124 PC . . . . . . . 68, 70, 72 System
A530-A595 . . . . . 166 FR . . . . . . . . . . 123-124 PE . . . . . . . . . . . . . 80-83 V
RSM-Series, Single-Acting
Flat-Jac® Cylinders ......................... 24-25 Global Warranty ...................................... 106
Heavy Duty Load Skates .............. 174-175
A, WR-Series, Wedgies and
A604. . . . . . . . . . . . . . 123 FS . . . . . . . . . . . . . . . . 187 PF . . . . . . . . . . . . . . . . . . 92 V . . . . . . 63, 138-139 Components
A607. . . . . . . . . . . . . . 166 FSB . . . . . . . . . . . . . . 188 PGM . . . . . . 104-105 VA2 . . . . . . . . . . . . . . 101
RCS-Series, Single-Acting Introduction and Standards .................... 107 Spread Cylinders ................................. 177 Page 119-132
Safety Instructions ........................... 108-109 A630. . . . . . . . . . . . . . 123 FSH . . . . . . . . . . . . . . 188 PMA . . . . . . 207, 215 VB . . . . . . . . . 142, 148
Low Height Cylinders ....................... 24-25 CM-Series, Storage Cases ..................... 176
Cylinder-Pump Matching and Selection . 110 A650. . . . . . . . . . . . . . 166 FSM . . . . . . . . . . . . . 188 PME . . . . . . 206, 208 VC . . . . . . . . . 134-137
BRC-Series, Single-Acting WHC-WMC-Series,
Pull Cylinders ................................... 26-27 Hydraulic Work Sheet ............................. 111 Cutters & Cutterheads .................. 178-179 AH . . . . . . . . . . . . . . . . 123 FZ . . . . . . . . . . . . . . . . 125 PMU . . . . . . 206, 208 VE . . . . . . . . . . 134-137
BRP-Series, Single-Acting Basic Hydraulic System Set-ups ..... 112-113 STB-Series, Pipe Benders ............... 180-181 AM . . . . . . . . . . . . . . . 124 PP . . . . . . . . . . . . . 96-97 VHJ . . . . . . . . . . . . . . 148
Pull Cylinders ................................... 26-27 Basic Hydraulics .............................. 114-115 DPT, PT-Series, AR . . . . . . . . . . . . . . . . 123 G PT . . . . . . . . . . 182-183 VLP . . . . . . . . 142-143 Valves
RCH-Series, Single-Acting Conversion Tables ................................... 116 Post-Tensioning Tools.................... 182-183 ATM . . . . . . . . . . . . . . 189 G . . . . . . . . . . . 128-129 PTA . . . . . . . 207, 214 VM . . . . . . . . . 134-137
Hollow Plunger Cylinders ................. 28-29 Cylinder Speed Charts ............................ 117 AW . . . . . . . . . . . . . . . . . 12 GA . . . . . . . . . . . . . . . 132 PTE . . . . . . . 206, 209 Page 133-139
RRH-Series, Double-Acting Valve Information ..................................... 118 Bolting Tools 184-216 GF . . . . . . . . . 126-127 PU . . . . . . . . . . . . . 78-79 W
Hollow Plunger Cylinders ................. 30-31 B GP . . . . . . . . . 126-127 W . . . . . . . . . . . 198-201
BRD-Series, Double-Acting System Components 119-132 Introduction....................................... 184-185 BAD . . . . . . . . . . . . . . . 33 R WCB . . . . . . 178-179
Precision Cylinders .......................... 32-33 NC-Series, Hydraulic Nut Splitters ......... 186 BFZ . . . . . . . . . . . . . . 125 H RAH . . . . . . . . 196-197 WHC . . . . . . . . . . . . 178
RR-Series, Double-Acting Introduction ............................................. 119 FS-Series, Hydraulic Flange Spreaders .. 187 BHP . . . . . . . 152-155 H . . . . 120, 128-129 RAC . . . . . . . . . . . . . . . . 14 WHR . . . . . . . . . . . . 178
Long Stroke Cylinders ...................... 34-37 700-Series, High Pressure Hoses .... 120-121 FSH, FSM-Series, Wedge Spreaders ..... 188 BLS . . . . . . . . . . . 56-57 HA . . . . . . . . . . . . . . . . 121 RACH . . . . . . . . . . . . . . 18 WMC . . . . . . . . . . . . 179 Presses
CLSG-Series, Single-Acting A, C, F, T-Series, Couplers ............... 122-123 ATM-Series, Flange Alignment Tools ...... 189 BPR . . . . . . . 144-145 HB . . . . . . . . . . . . . . . 121 RACL . . . . . . . . . . . . . . 16 WR . . . . . . . . . . . . . . . 177
High Tonnage Cylinders ................... 38-41 HF-Series, Hydraulic Oil .......................... 124 S-Series, Square Drive Steel BRC . . . . . . . . . . 26-27 HC . . . . . . . . . . . . . . . 121 RAR . . . . . . . . . . . . . . . . 20 Page 140-149
CLS-Series, Single-Acting A, AM-Series, Manifolds ......................... 124 Torque Wrenches .......................... 190-193 BRD . . . . . . . . . . 32-33 HF . . . . . . . . . . . . . . . . 124 RB . . . . . . . . . . . . . . . . . 12 Z
High Tonnage Cylinders ................... 42-45 FZ, BFZ-Series, Fittings .......................... 125 SQD-Series, Square Drive Aluminium BRP . . . . . . . . . . . 26-27 HP . . . . . . . . . . . . 29, 31 RC . . . . 8-12, 62-63 Z . . . . . . . . . . . . . . . . . . 123
CLRG-Series, Double-Acting GP, GF-Series, Force Gauges ......... 126-127 Torque Wrenches .......................... 194-197 BSS . . . . . . . . 90, 148 HR . . . . . . . . . 204-205 RCH . . . . . . . . . . 28-29 ZC . . . . . . . . . . . . . 92-93
High Tonnage Cylinders ................... 46-49 G, H-Series, Pressure Gauges ........ 128-129 W-Series, Steel Hexagon Cassette BZ . . . . . . . . . 180-181 HXD . . . . . . . . 202-205 RCS . . . . . . . . . . 24-25 . . . . . . . . . . . . . . . 133-135
CLL-Series, Single-Acting T-Series, Test System Gauges ................ 130 Torque Wrenches........................... 198-201 REB . . . . . . . . . . . . . . . 12 ZE . . . . . . . . 85, 90-95
Lock Nut Cylinders ........................... 50-53 DGR-Series, Digital Gauges .................... 131 HXD-Series, Aluminium Hexagon C I REP . . . . . . . . . . . . . . . 12 ZH . . . . . . . . . . . . . . . . . 93 Pullers
SLS-Series, Synchronous Systems ..... 54-55 GA-Series, Gauge Accessories ............... 132 Cassette Torque Wrenches............ 202-205 C . . . . . . . . . . . . . . . . . . 123 IN . . . . . . . . . . 204-205 RFL . . . . . . . . . . . . . . . . 98 ZL . . . . . . . . . . . . . . . . . . 92
BLS, SL-Series, Stage Lift Systems .... 56-57 Torque Wrench & Pump - Hose CAT . . . . . 12, 25, 41 IPL . . . . . . . . . . . . . . . 148 RR . . . . . . . . . . . . . 34-37 ZP . . . . . . . . . . . . . 92-93 Page 150-163
SHS-Series, SyncHoist, Valves 133-139 Selection Matrix............................. 206-207 CAT . . . . . 49, 45, 53 RRH . . . . . . . . . . 30-31 ZU4 . . . . . . . . . . . 84-89
Load Positioning Systems ............... 58-59 PME, PMU-Series, Portable Electric CATG . . . . . . . . 15, 17 J RSM . . . . . . . . . . 24-25 ZU4T . . . . . . . . . . . . 207
JH, JHA-Series, Introduction ............................................. 133 Torque Wrench Pumps.......................... 208 . . . . . . . . . . . 21, 41, 49 JBI . . . . . . . . . . . . . . . . . 12 RWH . . . . . . . . . . . . 152 . . . . . . . . . . . . . . 210-213
Steel and Aluminium Jacks .................... 60 3-Way Directional Control Valves .... 134-135 PTE-Series, Portable Electric CC . . . . . . . . . 202-205 JH . . . . . . . . . . . . . . . . . . 60 ZR . . . . . . . . . . . . . . . . . 92
EBJ-Series, Steel Bottle Jacks ................. 61 4-Way Directional Control Valves .... 136-137 Torque Wrench Pumps.......................... 209 CD . . . . . . . . . . . . . . . 123 JHA . . . . . . . . . . . . . . . . 60 S
RC-Series, High Temperature & Pressure and Flow Control Valves ... 138-139 ZU4T-Series, Electric CH . . . . . . . . 123, 194 S . . . . . . . . . . . . 190-193 11. . . . . . . . . . . . . . . 76-77 Tools
Corrosion Resistant Products .......... 62-63 Torque Wrench Pumps .................. 210-213 CLL . . . . . . . . . . . 50-53 L SB . . . . 92, 172, 188 25A- . . . . . . . 196-197
SC-Series, Cylinder-Pump Sets .......... 64-65 Hydraulic Presses 140-149 PTA-Series, Air Driven CLP . . . . . . . . . . . 22-23 LH . . . . . . . . . . . . . . . . 149 SCH . . . . . . . . . . 64-65 41- . . . . . . . . . . . . . . . . . 77 Page 164-183
Torque Wrench Pumps.......................... 214 CLRG . . . . . . . . 46-49 LW . . . . . . . . . . . . . . . 172 SCL . . . . . . . . . . . 64-65 43- . . . . . . . . . . 77, 130
Pumps (Hydraulic) 66-105 Introduction ...................................... 140-141 PMA-Series, High Flow Air Driven CLS . . . . . . . . . . . 42-45 SCP . . . . . . . . . . . 64-65 45- . . . . . . . . . . . . . . . . . 77
VLP-Series, Bench and Torque Wrench Pumps.......................... 215 CLSG . . . . . . . . . 38-41 M SCR . . . . . . . . . . 64-65 50A- . . . . . . . 196-197
Introduction .......................................... 66-67 Workshop Presses ........................ 142-143 Bolt, Nut and Thread Sizes ..................... 216
CM . . . . . . . . . . . . . . . 176 MP . . . . . . . . . . . . . . . . . . 74 SDA . . . . . . . 192-193 72- . . . . . . . . . . . . 76-77
P-Series, Lightweight Hand Pumps .... 68-69 BPR-Series, Roll Frame Presses ..... 144-145
CR . . . . . . . . . . . . . . . 123 MS . . . . . . . . . . 166-169 SHS . . . . . . . . . . . 58-59 83- . . . . . . . . . . 77, 130
P-Series, Steel Hand Pumps ............... 70-71
P-Series, Low Pressure Hand Pumps . 72-73
A-Series, C-Clamps Arbor Presses . 146-147
Press Accessories ................................... 148 About Enerpac 217
CW . . . . . . . . . . . . . . . 168 MSP . . . . . . . . . . . . . 171 SL . . . . . . . . . . . . . 56-57 75A- . . . . . . . 196-197 Bolting Tools
MZ . . . . . . . 1568-169 SLS . . . . . . . . . . . 54-55 100A- . . . . . 196-197
MP-Series, Multifluid Hand Pumps ........... 74 LH-Series, Load Cells ............................. 149 Enerpac Worldwide Locations 218
D SOH . . . . . . . . . . . . . 173 160A- . . . . . 196-197
Page 184-216
P-Series, Foot Pump.................................. 75 TM-Series, Tension Meters ..................... 149 Model Number Index 219
DGR ............. 131 SP . . . . . . . . . . 170-171 270A- . . . . . 196-197
DPT ....... 182-183 SPD . . . . . . . . . . . . . . 171
2 www.enerpac.com 219
Model Number Index Section Index

Cylinders
A E N SPK . . . . . . . . . . . . . . . 170
A5-A10 . . . . . . . . . . . 166 EBJ . . . . . . . . . . . . . . . . . . 61 NC . . . . . . . . . . . . . . . . . 186 SQD . . . . . . . . . .194-197
Page 6-65
A12 . . . . . . . . . . . . . . . . . . 12 ELP . . . . . . . . . 174-175 NV . . . . . . . . . . . . . . . . . . 132 STB . . . . . . . . . 180-181
A13-A28 . . . . . . . . . 166 EMB . . . . . . . . . . . . . . . 174 STC . . . . . . . . . . . . . . . . 178
A29-A53. . . . . . . . . . . . 12 EP . . . . . . . . . . . . . 156-159 P STF . . . . . . . . . 187-188
A64-A66 . . . . . . . . . 124 EPH . . . . . . . . 160-163 P . . . . . 63, 68, 70, 72 STN . . . . . . . . . . . . . . . . 186
A92 . . . . . . . . . . 166, 177 EPHT . . . . . . . . . . . . . 163 P142AL . . . . . . . 62-63 STP . . . . . . . . . . . . . . . . 171
A102 . . . . . . . . . . . . . . . . . 12 EPP . . . . . . . . . 157-159 P392AL . . . . . . . 62-63 SW . . . . . . . . . . . . . . . . . 188 Pumps
A128-A192 . . . . . . 166 EPT . . . . . . . . . . . . . . . . 160 P392FP . . . . . . . . . . . . 75
A183 . . . . . . . . . . . . . . . 146 EPX . . . . . . . . . . . . . . . . 159 PA . . . . . . . . . . . . . . . . . . 100 T
Page 66-105
A185 . . . . . . . . 146, 166 ER . . . . . . . . . . . 174-175 PAH . . . . . . . . 102-103 T . . . . . . . . . . . . . 122-123
A200R . . . . . . . . . . . . . 148 ES . . . . . . . . . . . 174-175 PAM . . . . . . . . . . . . . . . 101 THC . . . . . . . . . . . . . . . 207
A205-A220 . . . . . . 146 PAMG . . . . . . . . . 98-99 THQ . . . . . . . . . . . . . . . 207
A218 . . . . . . . . . . . . . . . 166 F PATG . . . . . . . . . . 98-99 TM . . . . . . . . . . . . . . . . . 149
A242-A305 . . . . . . 166
A310, A330 . . . . . 146
F . . . . . . . . . . . . . 123-124
FH . . . . . . . . . . . 123-124
PARG . . . . . . . . . . 98-99
PC . . . . . . . . 68, 70, 72
TW . . . . . . . . . . . . . . . . . 189
System
A530-A595 . . . . . . 166
A604 . . . . . . . . . . . . . . . 123
FR . . . . . . . . . . . 123-124
FS . . . . . . . . . . . . . . . . . . 187
PE . . . . . . . . . . . . . . . 80-83
PF . . . . . . . . . . . . . . . . . . . . 92
V
V . . . . . . . . 63, 138-139
Components
A607 . . . . . . . . . . . . . . . 166 FSB . . . . . . . . . . . . . . . . 188 PGM . . . . . . . 104-105 VA2 . . . . . . . . . . . . . . . . 101 Page 119-132
A630 . . . . . . . . . . . . . . . 123 FSH . . . . . . . . . . . . . . . . 188 PMA . . . . . . . 207, 215 VB . . . . . . . . . . 142, 148
A650 . . . . . . . . . . . . . . . 166 FSM . . . . . . . . . . . . . . . 188 PME . . . . . . . 206, 208 VC . . . . . . . . . . . 134-137
AH . . . . . . . . . . . . . . . . . . 123 FZ . . . . . . . . . . . . . . . . . . 125 PMU . . . . . . . 206, 208 VE . . . . . . . . . . . 134-137
AM . . . . . . . . . . . . . . . . . 124
AR . . . . . . . . . . . . . . . . . . 123 G
PP . . . . . . . . . . . . . . . 96-97
PT . . . . . . . . . . . 182-183
VHJ . . . . . . . . . . . . . . . . 148
VLP . . . . . . . . . 142-143
Valves
ATM . . . . . . . . . . . . . . . . 189 G . . . . . . . . . . . . . 128-129 PTA . . . . . . . . 207, 214 VM . . . . . . . . . . 134-137 Page 133-139
AW . . . . . . . . . . . . . . . . . . . 12 GA . . . . . . . . . . . . . . . . . . 132 PTE . . . . . . . . 206, 209
GF . . . . . . . . . . . 126-127 PU . . . . . . . . . . . . . . 78-79 W
B GP . . . . . . . . . . . 126-127 W . . . . . . . . . . . . 198-201
BAD . . . . . . . . . . . . . . . . . 33 R WCB . . . . . . . 178-179
BFZ . . . . . . . . . . . . . . . . 125 H RAH . . . . . . . . . 196-197 WHC . . . . . . . . . . . . . . 178
BHP . . . . . . . . 152-155
BLS . . . . . . . . . . . . . 56-57
H . . . . . 120, 128-129
HA . . . . . . . . . . . . . . . . . . 121
RAC . . . . . . . . . . . . . . . . . . 14
RACH . . . . . . . . . . . . . . . 18
WHR . . . . . . . . . . . . . . 178
WMC . . . . . . . . . . . . . . 179
Presses
BPR . . . . . . . . 144-145 HB . . . . . . . . . . . . . . . . . . 121 RACL . . . . . . . . . . . . . . . . 16 WR . . . . . . . . . . . . . . . . . 177 Page 140-149
BRC . . . . . . . . . . . . 26-27 HC . . . . . . . . . . . . . . . . . 121 RAR . . . . . . . . . . . . . . . . . . 20
BRD . . . . . . . . . . . . 32-33 HF . . . . . . . . . . . . . . . . . . 124 RB . . . . . . . . . . . . . . . . . . . 12 Z
BRP . . . . . . . . . . . . 26-27 HP . . . . . . . . . . . . . . 29, 31 RC . . . . . 8-12, 62-63 Z . . . . . . . . . . . . . . . . . . . . 123
BSS . . . . . . . . . . 90, 148 HR . . . . . . . . . . 204-205 RCH . . . . . . . . . . . . 28-29 ZC . . . . . . . . . . . . . . 92-93
BZ . . . . . . . . . . . 180-181 HXD . . . . . . . . . 202-205 RCS . . . . . . . . . . . . 24-25 . . . . . . . . . . . . . . . . 133-135
C I
REB . . . . . . . . . . . . . . . . . 12
REP . . . . . . . . . . . . . . . . . 12
ZE . . . . . . . . . 85, 90-95
ZH . . . . . . . . . . . . . . . . . . . . 93
Pullers
C . . . . . . . . . . . . . . . . . . . . 123 IN . . . . . . . . . . . . 204-205 RFL . . . . . . . . . . . . . . . . . . 98 ZL . . . . . . . . . . . . . . . . . . . . 92 Page 150-163
CAT . . . . . . 12, 25, 41 IPL . . . . . . . . . . . . . . . . . 148 RR . . . . . . . . . . . . . . 34-37 ZP . . . . . . . . . . . . . . . 92-93
CAT . . . . . . 49, 45, 53 RRH . . . . . . . . . . . . 30-31 ZU4 . . . . . . . . . . . . . 84-89
CATG . . . . . . . . . 15, 17 J RSM . . . . . . . . . . . 24-25 ZU4T . . . . . . . . . . . . . . 207
. . . . . . . . . . . . . 21, 41, 49 JBI . . . . . . . . . . . . . . . . . . . 12 RWH . . . . . . . . . . . . . . 152 . . . . . . . . . . . . . . . 210-213
CC . . . . . . . . . . 202-205 JH . . . . . . . . . . . . . . . . . . . . 60 ZR . . . . . . . . . . . . . . . . . . . . 92
CD . . . . . . . . . . . . . . . . . 123
CH . . . . . . . . . . 123, 194
JHA . . . . . . . . . . . . . . . . . . 60 S
S . . . . . . . . . . . . . 190-193 11 . . . . . . . . . . . . . . . . 76-77
Tools
CLL . . . . . . . . . . . . . 50-53 L SB . . . . . 92, 172, 188 25A- . . . . . . . . 196-197 Page 164-183
CLP . . . . . . . . . . . . 22-23 LH . . . . . . . . . . . . . . . . . . 149 SCH . . . . . . . . . . . . 64-65 41- . . . . . . . . . . . . . . . . . . . 77
CLRG . . . . . . . . . . 46-49 LW . . . . . . . . . . . . . . . . . 172 SCL . . . . . . . . . . . . 64-65 43- . . . . . . . . . . . . 77, 130
CLS . . . . . . . . . . . . 42-45 SCP . . . . . . . . . . . . 64-65 45- . . . . . . . . . . . . . . . . . . . 77
CLSG . . . . . . . . . . 38-41 M SCR . . . . . . . . . . . . 64-65 50A- . . . . . . . . 196-197
CM . . . . . . . . . . . . . . . . . 176 MP . . . . . . . . . . . . . . . . . . . . 74 SDA . . . . . . . . 192-193 72- . . . . . . . . . . . . . . 76-77
CR . . . . . . . . . . . . . . . . . 123 MS . . . . . . . . . . . 166-169 SHS . . . . . . . . . . . . 58-59 83- . . . . . . . . . . . . 77, 130 Bolting Tools
CW . . . . . . . . . . . . . . . . . 168 MSP . . . . . . . . . . . . . . . 171 SL . . . . . . . . . . . . . . . 56-57 75A- . . . . . . . . 196-197
MZ . . . . . . . . 1568-169 SLS . . . . . . . . . . . . . 54-55 100A- . . . . . . 196-197 Page 184-216
D SOH . . . . . . . . . . . . . . . 173 160A- . . . . . . 196-197
DGR . . . . . . . . . . . . . . . 131 SP . . . . . . . . . . . 170-171 270A- . . . . . . 196-197
DPT . . . . . . . . . 182-183 SPD . . . . . . . . . . . . . . . 171
www.enerpac.com 3
The World-
A complete range of quality high force tools for all industrial applications, with local
availability and after sale service anywhere in the world…. this is what has made Enerpac
the undisputed global market leader in high pressure hydraulics.
Across every continent, Enerpac’s network Always at the leading edge of technology,
of authorized distributors and service Enerpac has continued to develop its range
centers can reach even the most remote of time and cost-savings tools, utilizing
locations, supplying and servicing modern engineered materials to improve
products that are designed to enhance productivity and minimize operator
productivity and performance, while fatigue.
making the workplace safer.
Enerpac’s commitment to the continued
With over 150 sales specialists and a development of quality high force tools
network of service and engineering ensures that the products you purchase are
support in 17 countries across the globe, the best tools in the industry. We will
Enerpac has become the product of choice continue to lead the way in the
in industries such as manufacturing, development of quality high force tools for
construction, energy, oil & gas, all industrial applications.
shipbuilding, railroads, mining,
and metals transformation.
4
Class Brand
10 Good Reasons to Total Quality
Our products are tested
Work with Enerpac to the most exacting

standards. These high
standards guarantee the
quality, price and
performance
• Expert Design requirements of the
markets we serve around
• Highly Reliable the globe.
• Service Excellence
• Worldwide Experience Global Network
Enerpac has an extensive network of authorized distributors and
• Application Support service centers located in more than 90 countries worldwide. You
can rely on Enerpac for the products and technical support you
need to get your job done, anywhere in the world.
• Availability
Logistics Excellence
• Quality Enerpac’s mission is to
maintain service
• Value excellence in the ever-
changing world of
• Innovative Products modern distribution.
Providing our extensive
• Systems Solutions range of products to our

thousands of distributors
worldwide demands a
logistic expertise only a
market leader can
provide.
A Tradition of Innovation
Enerpac has a long history of finding new solutions to better meet
the challenges of the industries we serve. We were the first to
develop a composite hand pump and the first to offer a
computerized lifting system. Our latest innovations include a full
range of aluminium cylinders…. cylinders with the strength of steel
and the advantages of aluminium and the Z-Class series of power
pumps…. pumps that were designed to run cooler, use less
electricity and are easy to service.
And to support the demands of new technologies in the
construction industry, Enerpac has continued to develop Integrated
System capabilities. These capabilities will provide synchronized
movement control for your most challenging applications.
www.enerpac.com 5
Enerpac Hydraulic Cylinders Hydraulic Technology Worldwide
ENERPAC hydraulic cylinders are available in Hardened Saddle

prevents plunger from
hundreds of different configurations. Whatever the mushrooming and jamming
in the top bearing. Snap-in
industrial application... lifting, pushing, pulling, bending, design.
holding... whatever the force capacity, stroke length, or

Plunger Wiper
size restrictions... single- or double-acting, solid or hollow reduces contamination,
plunger, you can be sure that Enerpac has the cylinder to extending cylinder life.
Z
suit your high force application. Golden Ring

Enerpac cylinders fully comply to ASME B30.1. absorbs eccentric loading
Z1
J
without galling cylinder parts.

B
18 3/8
F
H
Golden Ring Design
E
N
Plated Plunger
PT -
The exclusive Golden

F
resists wear and rust.

"
Ring Design is a unique bearing design

X
which absorbs eccentric load stresses to

K
protect your cylinder against abrasion,
Note: The cut-away drawing is representative of typical cylinder construction, and may not represent all cylinders in this section.
A
over-extending or plunger blow-outs and

jamming or top-end mushrooming.
N
As a result, Golden Ring cylinders

W
provide long, trouble-free operation.

B
A
F
P
Golden Ring
absorbs eccentric loading
Q
F1
without galling cylinder parts.
Plunger Return Spring

enables fast plunger
retraction on single-acting
cylinders.
Cylinder-Pump Sets
For your ordering convenience
cylinders are available in sets
(cylinder, gauge, couplers,
hose and pump).
Page: 64
6
Cylinder Section Overview
Capacity 1) Stroke Range Cylinder type and functions Series Page

ton (kN) (mm)
General Purpose Cylinders,

5 -95 16 - 362 RC 8
Single-Acting,
(45-933) (incl. accessories)
Aluminium Cylinders, RAC
20-150 50-250 RACL 13
Single-Acting, Lock Nut,
(229-1589) RACH
Hollow Plunger, Double-Acting RAR
Pancake and Low Height CLP
5-520 6-62 22
Cylinders, Single-Acting RSM
(45-5114) RCS 24
Pull Cylinders,
2,5-50 16 - 362 BRC 26
Single-Acting
(24-505) BRP
Hollow Plunger Cylinders
13-145 8-258 RCH 28
Single- and Double-Acting
(125-1429) RRH 30
Precision Production Cylinders,
4-23 28-260 BRD 32
Double-Acting
(35-222) (incl. mounting attachments)
Long Stroke Cylinders,
10-520 16 - 1219 RR 34
Double-Acting
(101-5108)
High Tonnage Cylinders,
50-1000 50-300 CLSG 38
with integral stop ring
(496-10260) Single-Acting,
50-1000 50-300 CLS 42
with reduced collapsed height
(496-10260) Single-Acting,
50-1000 50-300 CLRG 46
Double-Acting
(496-10265)
50-1000 50-300 CLL 50
Single-Acting with Mechanical
(496-10260) Lock Nut, Corrosion Protected
Synchronous Lift Systems SLS
10-1000 5000 max. 54
Stage Lift Systems BLS, SL
(101-10260) Synchronous Hoisting Systems SHS 58
1,4-150 76-508 Aluminium and Steel Jacks JHA, JH 60

(13-1335) Bottle Jacks EBJ 61
High Temperature and Corrosion
10-25 54- 158 Resistant Cylinders, Hand Pumps
RC 62
(101-232) and Valves P, V
1)
All ton values specified in this catalog are metric ton and are for cylinder class identification only. Please refer to the kN data for calculations.
www.enerpac.com 7
RC-Series, Single-Acting Cylinders Hydraulic Technology Worldwide
From left to right: RC-506, RC-50, RC-2510, RC-154, RC-10010, RC-55, RC-1010
The Industry
Standard General
Purpose Cylinder
Saddles
All RC cylinders are
equipped with hardened
removable grooved saddles.
For tilt and flat saddles, see
the RC-Series accessory page.
Page: 12
Base Plates
To ensure the stability of
cylinders for lifting
applications, base plates are
available for 10, 25 and 50
ton RC cylinders.
• Collar threads, plunger threads and base mounting Page: 12
holes enable easy fixturing (on most models)
• Designed for use in all positions Specialty Attachments
• Removable strap handles for unobstructed fixturing For solving all kinds of
(RC-5013, RC-7513 and both 95 ton models) application problems,
• High strength alloy steel for durability specialty attachments are
available for 5, 10 and 25 ton
• Heavy duty return springs RC cylinders.
• Baked enamel finish for increased corrosion resistance Page: 168
• CR-400 coupler and dust cap included on all models
• Plunger wiper reduces contamination, extending
cylinder life
RC cylinder mounting attachments greatly

Stage lifting set up in Greece, where assembled pipes, 25 meters in length, extend the application possibilities (available
were stage lifted with six RC-2514 cylinders. for 5, 10,15 and 25 ton cylinders).
8 www.enerpac.com
Single-Acting, General Purpose Cylinders
Think Safety
Manufacturer’s rating of
RC
load and stroke are Series
maximum safe limits.
Good practice encourages using only
80% of these ratings.
QUICK SELECTION CHART Capacity:

For complete technical information see next page.
5 -95 ton
Cylinder Stroke Model Cylinder Oil Collapsed
Capacity Number Effective Capacity Height Stroke:
Area
ton 16 - 362 mm
(kN) (mm) (cm2) (cm3) (mm) (kg)
Maximum Operating Pressure:
16 RC-50** 6,5 10 41 1,0
25 RC-51 6,5 16 110 1,0
700 bar
5 76 RC-53 6,5 50 165 1,5
(45)
127 RC-55* 6,5 83 215 1,9
177 RC-57 6,5 115 273 2,4
Ultra-Lightweight
232 RC-59 6,5 151 323 2,8 Aluminium Cylinders
26 RC-101 14,5 38 89 1,8 If you need a higher cylinder
54 RC-102* 14,5 78 121 2,3 capacity-to-weight-ratio the
105 RC-104 14,5 152 171 3,3 RAC-Series are the perfect
10 156 RC-106* 14,5 226 247 4,4 choice.
(101)
203 RC-108 14,5 294 298 5,4
257 RC-1010* 14,5 373 349 6,4
Page: 13
304 RC-1012 14,5 441 400 6,8
356 RC-1014 14,5 516 450 8,2
25 RC-151 20,3 51 124 3,3 High Temperature and
RC-152 Corrosion Resistant
51 20,3 104 149 4,1
Cylinders
101 RC-154* 20,3 205 200 5,0
15 Some cylinders are available
152 RC-156* 20,3 308 271 6,8
(142) with Viton seals and nickel
203 RC-158 20,3 411 322 8,2 plating for use in extreme environments.
254 RC-1510 20,3 516 373 9,5
305 RC-1512 20,3 619 423 10,9
356 RC-1514 20,3 723 474 11,8 Page: 62
26 RC-251 33,2 86 139 5,9
50 RC-252* 33,2 166 165 6,4 Gauges
102 RC-254* 33,2 339 215 8,2 Minimize the risk of
25 158 RC-256* 33,2 525 273 10,0 overloading and ensure long,
(232)
210 RC-258 33,2 697 323 12,2 dependable service from
261 RC-2510 33,2 867 374 14,1 your equipment. Refer to the
System Components Section for a full
311 RC-2512 33,2 1033 425 16,3
range of gauges.
362 RC-2514* 33,2 1202 476 17,7
30 (295) 209 RC-308 42,1 880 387 18,1 Page: 119
51 RC-502 71,2 362 176 15,0
50 101 RC-504 71,2 719 227 19,1 Pump and Cylinder Sets
(498) 159 RC-506* 71,2 1131 282 23,1 All cylinders marked
337 RC-5013 71,2 2399 460 37,6 *
with an are available
75 156 RC-756 102,6 1601 285 29,5 as sets (cylinder, gauge,
(718) 333 RC-7513 102,6 3417 492 59,0 couplers, hose and pump) for your
ordering convenience.
95 168 RC-1006* 133,3 2239 357 59,0
(933) 260 RC-10010 133,3 3466 449 72,6 Page: 64
* Available as set, see note on this page.
** RC-50 cylinder has a non removable grooved saddle and no collar thread.
9
RC-Series, Single-Acting Cylinders Hydraulic Technology Worldwide
V
Pump and Cylinder Sets
All cylinders marked
U D1 *
as sets (cylinder, gauge,
couplers, hose and pump) for your
M L
D Page: 64
F
3/8"-18NPTF For full features see previous page.
Cylinder Stroke Model Cylinder Oil Collapsed Extended Outside

B Capacity Number Effective Capacity Height Height Dia.
A Area
H ton A B D
E (kN) (mm) (cm2) (cm3) (mm) (mm) (mm)
RC-50 16 RC-50** 6,5 10 41 57 58***

U1 25 RC-51 6,5 16 110 135 38
O
5 76 RC-53 6,5 50 165 241 38
RC-101 only (45)
(U1 = 19 mm) P 127 RC-55* 6,5 83 215 342 38
177 RC-57 6,5 115 273 450 38
J 232 RC-59 6,5 151 323 555 38
26 RC-101 14,5 38 89 115 57
P 54 RC-102* 14,5 78 121 175 57
105 RC-104 14,5 152 171 276 57
O
10 156 RC-106* 14,5 226 247 403 57
(101)
F 203 RC-108 14,5 294 298 501 57
W K 257 RC-1010* 14,5 373 349 606 57
304 RC-1012 14,5 441 400 704 57
356 RC-1014 14,5 516 450 806 57
X
25 RC-151 20,3 51 124 149 69
51 RC-152 20,3 104 149 200 69
101 RC-154* 20,3 205 200 301 69
B
15 152 RC-156* 20,3 308 271 423 69
(142)
203 RC-158 20,3 411 322 525 69
A 254 RC-1510 20,3 516 373 627 69
E 305 RC-1512 20,3 619 423 728 69
356 RC-1514 20,3 723 474 830 69
26 RC-251 33,2 86 139 165 85
50 RC-252* 33,2 166 165 215 85
102 RC-254* 33,2 339 215 317 85
H Z 25 158 RC-256* 33,2 525 273 431 85
(232)
V 210 RC-258 33,2 697 323 533 85
3/8"-18NPTF
261 RC-2510 33,2 867 374 635 85
311 RC-2512 33,2 1033 425 736 85
D 362 RC-2514* 33,2 1202 476 838 85
U
30 (295) 209 RC-308 42,1 880 387 596 101
51 RC-502 71,2 362 176 227 127
RC-51 - RC-7513 50 101 RC-504 71,2 719 227 328 127
(498) 159 RC-506* 71,2 1131 282 441 127
337 RC-5013 71,2 2399 460 797 127
75 156 RC-756 102,6 1601 285 441 146
(718) 333 RC-7513 102,6 3417 492 825 146
95 168 RC-1006* 133,3 2239 357 525 177
(933) 260 RC-10010 133,3 3466 449 709 177
RC-1006, RC-10010
** RC-50 cylinder has a non removable grooved saddle and no collar thread.
10 *** D1 = 41 mm, L = 20 mm, M = 25 mm.
Single-Acting, General Purpose Cylinders
Speed Chart Capacity:
See the Enerpac Cylinder 5 -95 ton RC
Speed Chart in our Series
‘Yellow Pages’ to Stroke:
determine your approximate
cylinder speed.
16 - 362 mm
Page: 117 700 bar
Cylinder Plunger Base to Saddle Saddle Plunger Plunger Base Mounting Holes Collar Collar Model
Bore Dia. Adv. Dia. Protr. Internal Thread Bolt Thread Thd. Thread Thread Number
Dia. Port from Plgr. Thread Length Circle Depth Length
E F H J K O P U V Z W X
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
28,7 25,4 19 ** ** ** ** 28 5,6 mm — — — 1,0 RC-50**
28,7 25,4 19 25 6 3 14 25 1 14 11/2" - 16
/4" - 16 /4"- 20UN 28 1,0 RC-51
28,7 25,4 19 25 6 3 14 25 1 14 11/2" - 16
/4" - 16 /4"- 20UN 28 1,5 RC-53
28,7 25,4 19 25 6 3 14 25 1 14 11/2" - 16
/4" - 16 /4"- 20UN 28 1,9 RC-55*
28,7 25,4 19 25 6 3 16 25 1 14 11/2" - 16
/4" - 16 /4"- 20UN 28 2,4 RC-57
28,7 25,4 19 25 6 3 16 25 1 14 11/2" - 16
/4" - 16 /4"- 20UN 28 2,8 RC-59
42,9 38,1 19 – – #10 - 24UN 6 39 5 12 21/4" - 14
/16"- 18UN 26 1,8 RC-101
42,9 38,1 19 35 6 19 39 5 12 21/4" - 14
1" - 8 /16"- 18UN 28 2,3 RC-102*
42,9 38,1 19 35 6 1" - 8 19 39 5 12 21/4" - 14
/16"- 18UN 26 3,3 RC-104
42,9 38,1 19 35 6 1" - 8 19 39 5 12 21/4" - 14
/16"- 18UN 28 4,4 RC-106*
5
42,9 38,1 19 35 6 1" - 8 19 39 /16"- 18UN 12 21/4" - 14 26 5,4 RC-108
42,9 38,1 19 35 6 1" - 8 19 39 5 12 21/4" - 14
/16"- 18UN 28 6,4 RC-1010*
42,9 38,1 19 35 6 1" - 8 19 39 5 12 21/4" - 14
/16"- 18UN 26 6,8 RC-1012
42,9 38,1 19 35 6 1" - 8 19 39 5 12 21/4" - 14
/16"- 18UN 26 8,2 RC-1014
50,8 41,4 19 38 9 1" - 8 25 47 3 12 23/4" - 16
/8"- 16UN 30 3,3 RC-151
50,8 41,4 19 38 9 1" - 8 25 47 3 12 23/4" - 16
/8"- 16UN 30 4,1 RC-152
50,8 41,4 19 38 9 1" - 8 25 47 3 12 23/4" - 16
/8"- 16UN 30 5,0 RC-154*
50,8 41,4 25 38 9 1" - 8 25 47 3 12 23/4" - 16
/8"- 16UN 30 6,8 RC-156*
50,8 41,4 25 38 9 1" - 8 25 47 3 12 23/4" - 16
/8"- 16UN 30 8,2 RC-158
3
50,8 41,4 25 38 9 1" - 8 25 47 /8"- 16UN 12 23/4" - 16 30 9,5 RC-1510
50,8 41,4 25 38 9 1" - 8 25 47 3 12 23/4" - 16
/8"- 16UN 30 10,9 RC-1512
50,8 41,4 25 38 9 1" - 8 25 47 3 12 23/4" - 16
/8"- 16UN 30 11,8 RC-1514
65,0 57,2 25 50 10 11/2" - 16 19 58 1
/2"- 13UN 19 35/16" - 12 49 5,9 RC-251
65,0 57,2 25 50 10 11/2" - 16 25 58 1
/2"- 13UN 19 35/16" - 12 49 6,4 RC-252*
65,0 57,2 25 50 10 11/2" - 16 25 58 1
/2"- 13UN 19 35/16" - 12 49 8,2 RC-254*
65,0 57,2 25 50 10 11/2" - 16 25 58 1
/2"- 13UN 19 35/16" - 12 49 10,0 RC-256*
65,0 57,2 25 50 10 11/2" - 16 25 58 1
/2"- 13UN 19 35/16" - 12 49 12,2 RC-258
65,0 57,2 25 50 10 11/2" - 16 25 58 1
/2"- 13UN 19 35/16" - 12 49 14,1 RC-2510
65,0 57,2 25 50 10 11/2" - 16 25 58 1
/2"- 13UN 19 35/16" - 12 49 16,3 RC-2512
65,0 57,2 25 50 10 11/2" - 16 25 58 1
/2"- 13UN 19 35/16" - 12 49 17,7 RC-2514*
73,2 57,2 57 50 10 11/2" - 16 25 — — — 35/16" - 12 49 18,1 RC-308
95,2 79,5 33 71 2 — — 95 1 19 55
/2"- 13UN 5" - 12 15,0 RC-502
95,2 79,5 33 71 2 — — 95 1 19 55
/2"- 13UN 5" - 12 19,1 RC-504
95,2 79,5 35 71 2 — — 95 1 19 55
/2"- 13UN 5" - 12 23,1 RC-506*
95,2 79,5 35 71 2 — — 95 1 19 55
/2"- 13UN 5" - 12 37,6 RC-5013
114,3 95,2 30 71 5 — — — — — 53/4" - 12 44 29,5 RC-756
114,3 95,2 30 71 5 — — — — — 53/4" - 12 44 59,0 RC-7513
130,3 104,9 41 71 2 — — 139 3
/4"- 10UN 25 67/8"- 12 44 59,0 RC-1006*
130,3 104,9 41 71 2 — — 139 3
/4"- 10UN 25 67/8" - 12 44 72,6 RC-10010
www.enerpac.com 11
RC-Series, Cylinder Accessories Hydraulic Technology Worldwide
SELECTION CHART
For use Saddles Base Mounting Clevis Eyes
with Plate Block
Cylinder Flat Grooved1) Tilt Base 4) Plunger
Capacity
ton (kN)
RB-52),
5 (45) A-53F2) A-53G2) – – REB-52) REP-52)
AW-512), AW-532)
10 (101) A-125), A-102F3) A-102G3) CAT-103) JBI-10 RB-10, AW-102 REB-10 REP-103)
15 (142) – A-152G CAT-10 – RB-15 REB-15 REP-10
25 (232) A-295) A-252G CAT-50 JBI-25 RB-25 REB-25 REP-25
30 (295) A-295) A-252G CAT-50 – RB-25 – REP-25
(
50 498 ) – – CAT-100 JBI-50 – – –
75 (718) – – CAT-100 – – – –
95 (933) – – CAT-100 – – – –
1) 2) 3) 4) 5)
Standard on 5-30 ton RC-cylinders Except RC-50 Except RC-101 Mounting screws are included. Used with Bender Sets.
DIMENSION CHARTS
Model Nr. Saddle Dimensions (mm) A-53F, A Model Nr. Tilt Saddle Dimensions (mm)
A-102F B
A B C A B C
Flat C Tilt
A-53F 25 6 17 A-12, A CAT-10 35 15 22 B 0-5°
A-102F 35 6 22 A-29 B CAT-50 50 23 35
A-12 51 48 1''-8 UNC C
A-29 51 48 11/2''-16UNC C A
Grooved Tilt
A
A-53G 25 6 17 CAT-100 71 24 – B 0-5°
B
A-102G 35 6 22
A
A-152G 38 9 22
C
A-252G 50 9 35
Model Nr. Base Plate Dimensions (mm) B D

A B C D E D
JBI-10 228 228 135 58 20 B C
A
JBI-25 279 279 140 86 26
A
JBI-50 304 15 95 131 31 C
E E
JBI-10, - 25 JBI-50
Model Nr. Mounting Block Dimensions (mm) H G H

A B C D E F G H E D G A E H I
C A
RB-5 11/2"- 16 88 76 – 25 – – – G
AW-51 11/2"- 16 70 59 10 24 54 "
1/4 - 20 41 B B F F B F
AW-53 11/2"- 16 72 7 7 19 57 1
/4"- 20 10 D
A D C A
RB-10 21/4"- 14 114 88 – 25 – – – E C D B E C
AW-102 21/4"- 14 100 82 16 30 76 "
7/16 - 20 58
RB-15 23/4"- 16 101 114 – 38 – – – RB-5, -10
35/16"- 12 127 165 – 50 – – – RB-15, -25 AW-51 AW-53 AW-102 (I= 4,8)
RB-25
Type Model Nr. Clevis Eye Dimensions (mm)

B B See our
A B C D E F E F F E
‘Yellow
REB-5 44 47 14 16 16 25
Pages’
4) REB-10 63 66 25 22 25 35
Base for application
REB-15 76 66 25 22 25 35
REB-25 95 79 38 31 31 41 C D D C information
REP-5 28 41 14 16 16 19 A A on these
Plunger REP-10 42 61 25 22 25 28 REP accessories.
REB
REP-25 57 74 38 31 31 35
12
The Enerpac Lightweight Aluminium Cylinders
From left to right: RAC-5010, RACL-5010, RAC-1504, RAR-5010
RAC, RACL, RACH, RAR
Series
Capacity:
20-150 ton @ 700 bar
Stroke:
50- 250 mm
Aluminium versus Steel
Aluminium cylinders, while
offering the most lightweight
solution, also have some unique
limitations due to material properties. It
differs from steel in that it has a lower
finite fatigue life. Aluminium cylinders
should NOT be used in high-cycle
applications such as production.
These cylinders are designed to provide
5000 cycles at their recommended
pressure. This limit should not be
exceeded. In normal lifting and many
maintenance applications, this should
• Lightweight, easy to carry and position to allow a higher provide a lifetime of use.
cylinder capacity-to-weight-ratio
• Non-corrosive by design, aluminium has always been a
good material for use in many caustic environments
• Composite Bearings on all moving surfaces guarantee NO RAC-Series, Single-Acting,
metal-to-metal contact, to resist side loads and increase Cylinders
cylinder life The lightweight general
purpose spring return
aluminium cylinders.
Removable Hardened Saddle, protects plunger from Page: 14

being damaged by abrasive surface contact.
RACL-Series, Lock Nut,
Stop Ring on all models absorbs eccentric loading Cylinders
and prevents plunger over-extension. The lightweight spring return
aluminium cylinders with lock
nut for mechanical load
Composite Bearing material to prevent metal to
metal contact, reducing side-load issues and holding.
Page: 16
increasing life.
Hard-coated Plunger and Base resist wear and
RACH-Series, Hollow
prevent galling.
Plunger Cylinders
For both push and pull forces
7075-T6 Aluminium Alloy Components for with a single-acting cylinder.
maximum strength and minimum weight.
Plunger Return Spring on all single-acting models Page: 18

for prompt cylinder return.
RAR-Series, Double-Acting
Composite Bearing material to prevent metal to
Cylinders
metal contact, reducing side-load issues and
increasing life. The lightweight aluminium
cylinders for lifting and
Steel Base Plate protects cylinder base from lowering.
abrasive surfaces and load-induced damage.
Page: 20
www.enerpac.com 13
RAC-Series, Single-Acting Aluminium Cylinders Hydraulic Technology Worldwide
Shown from left to right: RAC-5010, RAC-15010, RAC-304, RAC-208
Lightweight for
Maximum
Portability
Saddles
All RAC-cylinders are
equipped with bolt-on
removable hardened steel
saddles. For Tilt Saddles see
next page.
Page: 15
Lightweight Hand Pumps

The Enerpac composite
lightweight hand pumps
P-392 or P-802 make the
optimal lightweight set.
• Composite bearings prevent metal-to-metal contact,

increasing cylinder life and resistance to side-loads of up Page: 68
to 10%
• Hard-Coat finish on all surfaces resists damage and Lock Nut Cylinders
extends cylinder life When positive mechanical
• Handles standard on all models load holding is required,
RACL-Series Aluminium
• Steel base plate and saddle for protection against load-
Lock Nut Cylinders are the
induced damage ideal choice.
• Integral stop ring prevents plunger over-travel and is Page: 16
capable of withstanding the full cylinder capacity
• High strength return spring for rapid cylinder retraction t SELECTION CHART
• CR-400 coupler and dustcap included on all models Cylinder Stroke Model Cylinder
Capacity Number * Effective
• All cylinders meet ASME B-30.1 and ISO 10100 standards @ 700 bar Area
ton
(kN) (mm) (cm2)
50 RAC-202 31,2
20 (218) 100 RAC-204 31,2
150 RAC-206 31,2
50 RAC-302 44,2
30 (309) 100 RAC-304 44,2
The unique Enerpac RA- 150 RAC-306 44,2
Series jacks – lightweight
and entirely made of 50 RAC-502 70,9
aluminium alloy – these 50 (496) 100 RAC-504 70,9
RAC-506 jacks are ideal for
150 RAC-506 70,9
the submergence and
positioning procedure of 100 RAC-1004 143,1
tunnel elements at the 100 (1002) 150 RAC-1006 143,1
bottom of the the rivers in
the High Speed Train Line
200 RAC-1008 143,1
(HSL) project in Holland. 150 (1589) 150 RAC-1506 227,0
* Note: Every RAC-cylinder is available with a stroke
of 50, 100, 150, 200 and 250 mm.
14
Single-Acting, Aluminium Cylinders
RAC
Series
Optional Bolt On Tilt Saddle Dimensions (mm)
For Cylinder Tilt Saddle Tilt Saddle
Model / Model Saddle Protrusion
Capacity Number Diameter from Plunger
ton J1 K1 J1
0-5˚
RAC-50 CATG-50 50 24
K1 Capacity:
RAC-100 CATG-150 91 31
RAC-150 CATG-200 118 35 20-150 ton
Stroke:
J 50 - 250 mm
Steel Base Plate
Mounting Holes
The mounting holes in F
K 700 bar
these aluminium
cylinders are designed for fixturing
the steel base plate. They will not
withstand the capacity of the High Temperature and
cylinder. The steel base plate Corrosion Resistant
protects the cylinder from damage B Products
and should not be removed. Some cylinders, hand pumps
E A
and valves are available with
Viton seals and nickel plating for use in
Steel Base Plate Mounting Holes extreme environments.
Cylinder Bolt Thread Thread Page: 62

Model / Circle Depth 1)
Capacity U V Z H Z
ton (mm) (mm) (mm) Hoses
V 6
RAC-20 70,0 M6 12 Enerpac offers a complete
3/8"-18NPTF
RAC-30 80,0 M6 12 line of high quality hydraulic
hoses. To ensure the
RAC-50 110,0 M6 12
U D integrity of your system,
RAC-100 160,0 M6 12 specify only Enerpac hydraulic hoses.
RAC-150 200,0 M6 12
1) Including Base Plate Height of 6 mm.
Page: 120
Oil Collapsed Extended Outside Cylinder Plunger Bottom to Saddle Saddle Model
Capacity Height Height Diameter Bore Diameter Advance Diameter Protrusion Number *
Diameter Port from Plunger
A B D E F H J K
(cm3) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
156 174 224 85 63,0 50,0 27 40 3 3,6 RAC-202

312 224 324 85 63,0 50,0 27 40 3 4,1 RAC-204
468 274 424 85 63,0 50,0 27 40 3 4,6 RAC-206
221 181 231 100 75,0 60,0 32 40 3 4,5 RAC-302
442 231 331 100 75,0 60,0 32 40 3 5,2 RAC-304
663 281 431 100 75,0 60,0 32 40 3 5,9 RAC-306
354 186 236 130 95,0 80,0 30 50 3 8,5 RAC-502
709 236 336 130 95,0 80,0 30 50 3 9,8 RAC-504
1063 286 436 130 95,0 80,0 30 50 3 11,1 RAC-506
1431 271 271 180 135,0 110,0 46 94 3 19,6 RAC-1004
2147 321 471 180 135,0 110,0 46 94 3 21,9 RAC-1006
2863 371 571 180 135,0 110,0 46 94 3 24,2 RAC-1008
3405 343 493 230 170,0 140,0 51 113 3 33,3 RAC-1506
www.enerpac.com 15
RACL-Series, Lock Nut Aluminium Cylinders Hydraulic Technology Worldwide
Shown from left to right: RACL-1006, RACL-504, RACL-5010
To Secure Loads
Mechanically
Saddles
All RACL-cylinders are
saddles. For Tilt Saddles
see next page.
Page: 17
Remote Lifting
For heavy lifting in remote
locations use the Enerpac
ZE-Series electric pumps.
Page: 90
Hoses
• Aluminium Lock Nut provides mechanical load holding for Enerpac offers a complete
extended periods line of high quality hydraulic
• Hardened steel stop ring increasing cylinder life and hoses. To ensure the
resistance to side-loads of up to 5% integrity of your system,
specify only Enerpac hydraulic
• Hard-Coat finish on all surfaces resists damage and hoses.
extends cylinder life Page: 120
• Handles standard on all models

Gauges
• Steel base plate and saddle for protection against load-
Minimize the risk of
induced damage
overloading and ensure long,
• Integral stop ring prevents plunger over-travel and is dependable service from
capable of withstanding the full cylinder capacity your equipment. Refer to the
System Components Section for a
• High strength return spring for rapid cylinder retraction
full range of gauges.
• CR-400 coupler and dustcap included on all models Page: 119
• All cylinders meet ASME B-30.1 and ISO 10100 standards t SELECTION CHART
Cylinder Stroke Model Cylinder
@ 700 bar Area
ton
(kN) (mm) (cm2)
50 RACL-502 70,9
50 (496) 100 RACL-504 70,9
150 RACL-506 70,9
50 RACL-1002 143,1
100 (1002) 100 RACL-1004 143,1
150 RACL-1006 143,1
The portable lock nut cylinder 50 RACL-1502 227,0
RACL-1506 used for extended load
supports during epoxy injection for
150 (1589) 100 RACL-1504 227,0
bridge reinforcement. 150 RACL-1506 227,0
* Note: Every RACL-cylinder is available with a stroke
of 50, 100, 150, 200 and 250 mm.
16
Single-Acting, Aluminium Lock Nut Cylinders
RACL
Series
Capacity Number Diameter from Plunger J1
ton J1 K1 0-5˚
K1
RACL-50 CATG-50 50 24
Capacity:
RACL-100 CATG-150 91 31
RACL-150 CATG-200 118 35 50-150 ton
Stroke:
50 - 150 mm
J K
700 bar
S
Other Cylinder Capacities
Steel Base Plate F Lock Nut Aluminium
Mounting Holes Cylinders are also available
in capacities of 20 and 30
The mounting holes in
ton.
these aluminium
B
cylinders are designed for fixturing
Additional Stroke Lengths
the steel base plate. They will not
withstand the capacity of the All cylinder models are available with
cylinder. The steel base plate standard stroke lengths of 50, 100, 150,
E A 200 and 250 mm.
protects the cylinder from damage
and should not be removed. Visit www.enerpac.com for all cylinder
models and details.
Steel Base Plate Mounting Holes H Z

Lifting an Unbalanced
Cylinder Bolt Thread Thread V 6,0
Model / Circle Depth 1)
Load
Capacity U V Z 3/8"-18NPTF When lifting an unbalanced
ton (mm) (mm) (mm) load Enerpac Integrated
RACL-50 110,0 M6 12 U D Lifting Systems can be the
solution with multiple lift point
RACL-100 160,0 M6 12
capabilities from 4 to 64 points.
RACL-150 200,0 M6 12
1) Including Base Plate Height of 6 mm. Page: 54
Oil Collapsed Extended Outside Cylinder Plunger Bottom to Saddle Saddle Lock Nut Model
Capacity Height Height Diameter Bore Diameter Advance Diameter Protrusion Height Number *
Diameter (Threaded) Port fr. Plunger
A B D E F H J K S
(cm3) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
354 236 286 130 95,0 Tr 80 x 4 30 50 3 50 9,3 RACL-502

709 286 386 130 95,0 Tr 80 x 4 30 50 3 50 10,6 RACL-504
1063 336 486 130 95,0 Tr 80 x 4 30 50 3 50 11,9 RACL-506
716 296 346 180 135,0 Tr 110 x 6 46 94 3 75 21,9 RACL-1002
1431 346 446 180 135,0 Tr 110 x 6 46 94 3 75 24,2 RACL-1004
2147 396 546 180 135,0 Tr 110 x 6 46 94 3 75 26,5 RACL-1006
1135 323 373 230 170,0 Tr 140 x 6 51 113 3 80 32,2 RACL-1502
2270 373 473 230 170,0 Tr 140 x 6 51 113 3 80 36,2 RACL-1504
3405 423 573 230 170,0 Tr 140 x 6 51 113 3 80 40,2 RACL-1506
www.enerpac.com 17
RACH-Series, Aluminium Hollow Plunger Cylinders Hydraulic Technology Worldwide
Shown from left to right: RACH-1504, RACH-15010, RACH-206, RACH-306
The Lightweight
Solution for
Tensioning and
Testing
Saddles
All RACH-cylinders are
hollow removable saddles of
hardened steel.

The Enerpac composite
lightweight hand pumps
• Hollow plunger design allows for both pull and push forces P-392 or P-802 make the
optimal lightweight set.
• Composite bearings prevent metal-to-metal contact,
increasing cylinder life and resistance to side-loads of up
to 10%
• Hard-Coat finish on all surfaces resists damage and Page: 68
extends cylinder life
• Floating center tube increases seal and product life Lifting an Unbalanced
• Handles standard on all models Load
When lifting an unbalanced
• Steel base plate and saddle for protection against load- load Enerpac Integrated
induced damage Lifting Systems can be the
• Integral stop ring prevents plunger over-travel and is solution with multiple lift point
capable of withstanding the full cylinder capacity capabilities from 4 to 64 points.
• High strength return spring for rapid cylinder retraction

Page: 54
t SELECTION CHART
Cylinder Stroke Model Cylinder
@ 700 bar Area
ton
(kN) (mm) (cm2)
50 RACH-202 32,7
20 (229)
150 RACH-206 32,7
50 RACH-302 51,1
30 (358)
150 RACH-306 51,1
An RACH-306 powered by a P-392 100 RACH-604 84,7
hand pump used to extract 60 (596)
corroded carriage pins of refuse
150 RACH-606 84,7
collection vehicles. 100 (1157) 150 RACH-1006 164,6
* Note: Every RACH-cylinder is available with a
stroke of 50, 100, 150, 200 and 250 mm.
18
Single-Acting, Aluminium Hollow Plunger Cylinders
Aluminium versus Steel
Aluminium cylinders, while These cylinders are designed to
RACH
offering the most lightweight provide 5000 cycles at their Series
solution, also have some recommended pressure. This limit
unique limitations due to material should not be exceeded. In normal
properties. It differs from steel in that lifting and many maintenance
it has a lower finite fatigue life. applications, this should provide a
Aluminium cylinders should NOT be lifetime of use.
used in high-cycle applications such
as production. Capacity:
20-100 ton
Stroke:
50 - 150 mm
Center Hole Diameter:
27- 79 mm
J 700 bar
Steel Base Plate
Mounting Holes
F Other Cylinder Capacities
The mounting holes in
these aluminium Aluminium Hollow Plunger
cylinders are designed for fixturing Cylinders are also available
the steel base plate. They will not K in capacities of 150 ton.
withstand the capacity of the
cylinder. The steel base plate B Additional Stroke Lengths
protects the cylinder from damage All cylinder models are available with
and should not be removed. A standard stroke lengths of 50, 100, 150,
E 200 and 250 mm.
Visit www.enerpac.com for all cylinder
Z models and details.
Steel Base Plate Mounting Holes
H
Cylinder Bolt Thread Thread
Model / Circle Depth 1) V 6,0
Capacity U V Z 3/8"-
ton (mm) (mm) (mm) 18NPTF Standard Features
RACH-20 85,0 M6 12 • CR-400 coupler and dustcap
Y U D included on all models.
RACH-30 110,0 M6 12
RACH-60 160,0 M6 12 • All cylinders meet ASME B-30.1 and
ISO 10100 standards.
RACH-100 230,0 M6 12
1) Including Base Plate Height of 6 mm.
Oil Collapsed Extended Outside Cylinder Plunger Bottom Saddle Saddle Center Model
Capacity Height Height Diameter Bore Diameter to Adv. Diameter Protrusion Hole Number *
Diameter Port from Plunger Diameter
A B D E F H J K Y
(cm3) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
164 188 238 100 75,0 55,0 29 55 10,0 27,0 5,2 RACH-202
491 315 465 100 75,0 55,0 29 55 10,0 27,0 7,1 RACH-206
256 208 258 130 95,0 70,0 29 70 10,0 34,0 8,0 RACH-302
766 333 483 130 95,0 70,0 29 70 10,0 34,0 11,2 RACH-306
847 315 415 180 130,0 100,0 61 100 12,0 54,0 19,5 RACH-604
1270 380 530 180 130,0 100,0 61 100 12,0 54,0 22,8 RACH-606
2487 391 541 250 185,0 145,0 61 145 14,0 79,0 46,2 RACH-1006
www.enerpac.com 19
RAR-Series, Double-Acting, Aluminium Cylinders Hydraulic Technology Worldwide
Shown from left to right: RAR-5010, RAR-308, RAR-204
Portable Power
Lifters for
Double-Acting
Applications
Saddles
All RAR-cylinders are
saddles. For Tilt Saddles see
next page.
Page: 21
Hoses
Enerpac offers a complete
line of high quality hydraulic
• Composite bearings prevent metal-to-metal contact, hoses. To ensure the
increasing cylinder life and resistance to side-loads of up integrity of your system,
to 10% specify only Enerpac hydraulic hoses.
• Hard-Coat finish on all surfaces resists damage and
extends cylinder life Page: 120
• Handles standard on all models
• Steel base plate and saddle for protection against load- Remote Lifting
induced damage For heavy lifting in remote
• Integral stop ring prevents plunger over-travel and is
capable of withstanding the full cylinder capacity A double-acting cylinder
• Built-in safety valve prevents accidental over- must be powered by a pump with a
pressurization 4-way valve.
• Double-acting for rapid retraction, regardless of hose
lengths or system losses Page: 90
t SELECTION CHART
t RAR-cylinder used in a stage lift application. Cylinder Stroke Model Maximum Cylinder Oil
Capacity Number * Cylinder Effective Capacity
@ 700 Capacity Area
bar (kN) (cm2) (cm3)
ton (mm) Push Pull Push Pull Push Pull
50 RAR-502 496 187 70,9 26,7 354 134

50 100 RAR-504 496 187 70,9 26,7 709 267
150 RAR-506 496 187 70,9 26,7 1063 401
100 RAR-1004 1002 557 143,1 79,5 1431 795
100 150 RAR-1006 1002 557 143,1 79,5 2147 1193
200 RAR-1008 1002 557 143,1 79,5 2863 1590
150 150 RAR-1506 1589 924 227,0 132,0 3405 1980
* Note: Every RAR-cylinder is available with a stroke of 50, 100, 150, 200 and 250 mm.
20
Double-Acting, Aluminium Cylinders
RAR
Series
Capacity Number Diameter from Plunger
ton J1 K1 J1
0-5˚
RAR-50 CATG-50 50 24
K1 Capacity:
RAR-100 CATG-150 91 31
RAR-150 CATG-200 118 35 50-150 ton
Stroke:
50 - 200 mm
700 bar
J
Other Cylinder Capacities
Double-Acting Aluminium
F Cylinders are also available
Steel Base Plate K
in capacities of 20-30 ton.
Mounting Holes
The mounting holes in Additional Stroke Lengths
I
these aluminium All cylinder models are available with
cylinders are designed for fixturing standard stroke lengths of 50, 100, 150,
the steel base plate. They will not B 200 and 250 mm.
withstand the capacity of the 3/8"- Visit www.enerpac.com for all cylinder
cylinder. The steel base plate 18NPTF E A models and details.
protects the cylinder from damage
and should not be removed.
Lifting an Unbalanced
Steel Base Plate Mounting Holes H Z Load
Cylinder Bolt Thread Thread V 6 When lifting an unbalanced
Model / Circle Depth 1) load Enerpac Integrated
Capacity U V Z Lifting Systems can be the
ton (mm) (mm) (mm) solution with multiple lift point
RAR-50 110,0 M6 12 U D capabilities from 4 to 64 points.
RAR-100 165,0 M6 12
RAR-150 200,0 M6 12
1) Including Base Plate Height of 6 mm. Page: 54
Collapsed Extended Outside Cylinder Plunger Bottom Top to Saddle Saddle Model
Height Height Diameter Bore Diameter to Advance Retract Diameter Protrusion Number *
Diameter Port Port from Plunger
A B D E F H I J K
201 251 145 95,0 75,0 30 56 50 3 11,1 RAR-502

251 351 145 95,0 75,0 30 56 50 3 12,7 RAR-504
301 451 145 95,0 75,0 30 56 50 3 14,3 RAR-506
301 401 185 135,0 90,0 43 80 94 3 19,3 RAR-1004
351 501 185 135,0 90,0 43 80 94 3 22,2 RAR-1006
401 601 185 135,0 90,0 43 80 94 3 25,1 RAR-1008
348 498 230 170,0 110,0 38 75 113 3 33,2 RAR-1506
www.enerpac.com 21
CLP-Series, Pancake Lock Nut Cylinders Hydraulic Technology Worldwide
Shown from left to right: CLP-2002, CLP-5002
The Lowest
Power Lifter
Tilt Saddles
All CLP-Series cylinders
include integral tilt saddles
with maximum tilt angles
up to 5°.
Gauges
• Extremely low height for use in confined areas dependable service from
• Lock nut for positive and safe load holding over a long your equipment. Refer to the
period of time System Components Section for a full
range of gauges.
• Single-acting, load return
Page: 119
• Optional special synthetic coating for improved corrosion
resistance and lower friction for smoother operation to
withstand side load forces up to 3% of rated cylinder Hoses
capacity without scoring Enerpac offers a complete
• Overflow port functions as a stroke limiter line of high quality hydraulic
• CR-400 coupler and dust cap included on all models integrity of your system,
specify only Enerpac hydraulic hoses.
Page: 120
Only the extreme low height CLP-cylinder fits in this confined area to lift the
construction.The V-82 needle valve is used to control cylinder speed during
lifting and lowering.
Cylinder Stroke Model Cylinder Oil

Capacity Number* Effective Capacity
Area
ton (kN) (mm) (cm2) (cm3)

60 (606) 50 CLP-602 86,6 432
100 (1027) 50 CLP-1002 146,8 734
160 (1619) 45 CLP-1602 231,3 1040
200 (1999) 45 CLP-2002 285,6 1285
260 (2567) 45 CLP-2502 366,8 1650
400 (3916) 45 CLP-4002 559,5 2517
520 (5114) 45 CLP-5002 730,6 3287
* For special synthetic coating add suffix ‘C’ to model
number.
22
Single-Acting, Pancake Lock Nut Cylinders
Speed Chart CLP
See the Enerpac Cylinder Speed Series
Chart in our ‘Yellow Pages’ to
cylinder speed.
Page: 117
Longer Stroke Lock Nut Capacity:

Cylinders
For longer stroke lock nut 60-520 ton
applications the RACL and Stroke:
CLL-Series cylinders are the
perfect choice. 45-50 mm
Page: 7 700 bar
ALL CLP-SERIES
CYLINDERS REQUIRE A
SOLID LIFTING SURFACE
FOR CORRECT SUPPORT.
USE OF PANCAKE CYLINDERS ON
SURFACES SUCH AS SAND, MUD OR
DIRT, MAY RESULT IN CYLINDER
DAMAGE!
WRONG! RIGHT!
R 3
S
F
J
B Rough soil Flat lifting
K
surface
For more safety instructions see
A our ‘Yellow Pages’. Page: 108
H
E
3/8"- D
18NPTF
Collapsed Extended Outside Cylinder Plunger Base to Saddle Saddle Saddle Lock Nut Model
Height Height Diameter Bore Diameter Advance Diameter Protrusion Max. Tilt Height Number*
Diameter Port from Plgr. Angle
A B D E F H J K R S
125 175 140 105,0 Tr 104 x 4 19 96 6 5° 28 15 CLP-602
137 187 175 136,7 Tr 136 x 6 21 126 8 5° 31 26 CLP-1002
148 193 220 171,6 Tr 171 x 6 27 160 9 5° 40 44 CLP-1602
155 200 245 190,7 Tr 190 x 6 30 180 10 5° 43 57 CLP-2002
159 204 275 216,1 Tr 216 x 6 32 200 11 5° 44 74 CLP-2502
178 223 350 266,9 Tr 266 x 6 39 250 11 4° 55 134 CLP-4002
192 237 400 305,0 Tr 305 x 6 48 290 10 3° 62 189 CLP-5002
www.enerpac.com 23
RSM/RCS-Series, Low Height Cylinders Hydraulic Technology Worldwide
Shown from left to right: RSM-1000, RSM-300, RSM-50, RCS-1002, RCS-302
Maximum Power-to-
Height Ratio
Saddles
All RCS-Series cylinders
have plunger mounting holes
for installation of tilt saddles.
See table for selection and
dimensional information.
Page: 25
Lifting the first few

millimeters
The LW-16 Lifting Wedge
and SOH-Series Machine
Lifts are the perfect choice
for lifting the first few millimeters.
Page: 172
RSM-series, Flat-Jac® Cylinders Only a couple of centimeters will do for an

RSM-cylinder to lift a large construction. The
• Compact, flat design for use where most other cylinders V-82 needle valve is used to control cylinder
will not fit speed during lifting and lowering.
• Single-acting, spring return
• RSM-750, 1000 and 1500 have handles for easy carrying
• Mounting holes permit easy fixturing
• Baked enamel finish for increased corrosion resistance
• CR-400 coupler and dust cap included on all models,
except RSM-50 which is fitted with an AR-400 coupler.
• Hard chrome plated high quality steel plungers
• Grooved plunger ends require no saddle Stroke Model Cyl. Oil
Cyl.
Capa- Number Effect. Cap.
city Area
RCS-series, Low Height Cylinders
• Lightweight, low profile design for use in confined spaces ton (kN) (mm) (cm2) (cm3)
• Single-acting, spring return 5 (45) 6 RSM-50 6,5 4

10 (101) 12 RSM-100 14,5 18
• Baked enamel finish for increased corrosion resistance 20 (201) RSM-200 32
11 28,7
• Plunger wiper reduces contamination, extending 30 (295) 13 RSM-300 42,1 55
cylinder life 45 (435) 16 RSM-500 62,1 99
• CR-400 coupler and dust cap included on all models 75 (718) 16 RSM-750 102,6 164
• Grooved plunger end with threaded holes for mounting tilt 90 (887) 16 RSM-1000 126,7 203
saddles 150 (1386) 16 RSM-1500 198,1 317
10 (101) 38 RCS-101* 14,5 55
• Integral handle on RCS-1002 for easy carrying
20 (201) 45 RCS-201* 28,7 129
• Plated steel plungers 30 (295) 62 RCS-302* 42,1 261
45 (435) 60 RCS-502* 62,1 373
90 (887) 57 RCS-1002* 126,7 722
* Available as set, see note on next page.
24
Single-Acting, Low Height Cylinders
RSM
*
RCS
Series
Page: 64
Optional Bolt On Tilt Saddle Dimensions (mm) Capacity:

For Cylinder Model: Model
Number
5 -150 ton
A B C* 0-5°
C Stroke:
RCS-101 CAT-11 35 11 21 B
RCS-201, -302, -502
RCS-1002
CAT-51
CAT-101
50
71
15
17
29
35
A 6 - 62 mm
* ‘C’ dimension equals saddle protrusion from plunger. Mounting screws are included. Maximum Operating Pressure:
700 bar
M L
U
V
O
P U1 D
RSM Cylinder Mounting Hole Dimensions (mm)
F K Model Bolt Hole Counter Counter

Number Circle Dia. Bore Bore
U1 V Dia. Depth
F
RSM-50 28,5 5,5 9,1 4,3
B K RSM-100 36,6 7,1 10,7 7,9
3/8"- RSM-200 49,3 10,0 15,1 9,9
3/8"-
E A 18 NPTF RSM-300 52,3 10,0 15,9 11,2
18 NPTF
B RSM-500 66,5 11,0 19,0 12,7
A RSM-750 76,2 13,5 20,6 14,2
* RSM-1000 76,2 13,5 20,6 14,2
H H
RSM-1500 117,3 13,5 20,6 14,2
D E
RCS-Series RSM-Series
* 5° angle position of coupler on RCS-101, 201,302
Collapsed Extended Outside Cylinder Plunger Base to Plunger Plunger Plunger Thread Thread Bolt Model
Height Height Diameter Bore Dia. Advance Protrusion to to Mtg. Depth Circle Number
Dia. Port from Base Base Hole
A B D E F H K L M O P U
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
32 38 58 x 41 28,7 25,4 16 1 20 22 – – – 1,0 RSM-50
43 54 82 x 55 42,9 38,1 19 1 27 34 – – – 1,4 RSM-100
51 62 101 x 76 60,5 50,8 19 1 39 39 – – – 3,1 RSM-200
58 71 117 x 95 73,2 63,4 19 2 47 44 – – – 4,5 RSM-300
66 82 140 x 114 88,9 69,8 19 2 57 53 – – – 6,8 RSM-500
79 95 165 x 139 114,3 82,6 19 2 69 66 – – – 11,3 RSM-750
85 101 178 x 153 127,0 92,2 19 2 76 74 – – – 14,5 RSM-1000
100 116 215 x 190 158,8 114,3 23 2 95 82 – – – 26,3 RSM-1500
88 126 69 42,9 38,1 17 5 – – M4 8 26 4,1 RCS-101*
98 143 92 60,5 50,8 17 3 – – M5 8 39 5,0 RCS-201*
117 179 101 73,2 66,5 19 3 – – M5 8 39 6,8 RCS-302*
122 182 124 88,9 69,8 23 2 – – M5 8 39 10,9 RCS-502*
141 198 165 127,0 92,2 31 1 – – M8 10 55 22,7 RCS-1002*
www.enerpac.com 25
BRC/BRP-Series, Pull Cylinders Hydraulic Technology Worldwide
Shown from left to right: BRC-25, BRC-46, BRP-306, BRP-606, BRP-106C
For use with

Subassemblies and
Modules
*
Page: 64
Gauges
dependable service from
your equipment. Refer to the
range of gauges.
• High strength alloy steel construction Page: 119
• Plunger blow-out protection to prevent rod over-extension
• Hard chrome-plated plunger for long life Attachments and
• Replaceable links on BRP-models Accessories
BRC-25 and BRC-46 units
• Baked enamel finish for increased corrosion resistance have base, collar and
• CR-400 coupler and dust cap included on all models plunger threads to affix
a range of optional attachments and
accessories, such as chains, saddles
cylinder life and extension tubes.
• Single-acting, spring return Page: 168
To lift a load bearing mast into place, BRP-

series cylinders were used to tension the
Ship building, welding and Enerpac pull cylinders go hand in hand. supporting cables.
26
Single-Acting, Pull Cylinders
BRC Cylinder Mounting Dimensions (mm) BRC/
Model Base Collar Collar Mtg.
Number Mounting
Hole
Thread Thd. Thd.
Lgth. Lgth.
BRP
V W X Z
Series
BRC-25 /4" - 14 NPT 1 /2"- 16 UN
3 1
24 17
BRC-46 11/4"- 111/2 NPT 21/4"- 14 UN 26 24
BRC-106 M30 x 2 M85 x 2 25 24
3/8"- H Capacity:
18 NPTF
Z
P
2,5 - 50 ton
D V E F Q J W Q Stroke:
X P BRC-106 only
127-155 mm
A
B Maximum Operating Pressure:
BRC-25, -46, 106 700 bar
Cylinder Stroke Model Cyl. Oil Coll. Ext. Outs. Cyl. Plgr. Top to Saddle Plgr. Plunger
Capacity Number Effect. Cap. Height Height Dia. Bore Dia. Inlet Diameter Thd. Outside
Area Dia. Port Lgth. Thread
A B D E F H J P Q
ton (kN) (mm) (cm2) (cm3) (mm) (mm) (mm) (mm) (mm) (mm) (NPT) (mm) (kg)
2,5 (24) 127 BRC-25 3,5 45 264 391 48 28,4 19,0 45 3
/4"- 14 28 /16"- 24
11 1,8
5 (51) 140 BRC-46 7,3 101 301 441 57 42,9 30,2 42 11/4"- 111/2 32 13/16"- 16 4,5
10 (105) 151 BRC-106 15,0 228 289 440 85 54,1 31,8 39 – 25 M30X2 9,5
B B
A A T
3/8"-18NPTF D L T 3/8"-18NPTF D J
N
E N J E
M30 x 2 M 11/4"-7UNC L M
BRP-106C BRP-306
M30 x 2 L M50 x 3 L
3/8"-
3/8"-18NPTF D J J
18NPTF
E N E N D
A T M A T
B B M
BRP-106L BRP-606
Cylinder Stroke Model Cyl. Oil Coll. Ext. Outside Cyl. Link Link Link Link Slot to
Capacity Number Effect. Cap. Height Height Dia. Bore Height Open- Thick- Width Link
Area Dia. ing ness End
A B D E J L M N T
ton (kN) (mm) (cm2) (cm3) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
151 BRP-106C* 15,0 227 587 738 85 54,1 119 62 30 35 32 15,9
10 (105)
151 BRP-106L* 15,0 227 541 692 85 54,1 67 115 22 30 32 13,2
30 (326) 155 BRP-306* 46,6 722 1085 1240 136 88,9 114 145 35 39 50 48,1
50 (505) 152 BRP-606* 72,1 1096 719 871 140 110,0 130 149 39 50 70 53,5
* Available as set, see note on previous page. NOTE: BRP-106C, BRP106L and BRP-606 are fitted with rubber bellows for rod protection.
www.enerpac.com 27
RCH-Series, Hollow Plunger Cylinders Hydraulic Technology Worldwide
Shown from left to right: RCH-306, RCH-120, RCH-1003
Versatility in Testing,
Maintenance
and Tensioning
Applications
*
Page: 64
Ultra-Lightweight
Aluminium Cylinders
If you need a higher cylinder
capacity-to-weight-ratio the
Ultra-lightweight RACH-
• Hollow plunger design allows for both pull and push forces Series are the perfect choice.

Page: 18
• Nickel-plated, floating center tube on models over 20 ton
increases product life
Saddles
Most RCH-Series cylinders
• Collar threads for easy fixturing are equipped with smooth
saddles. See table at next
• RCH-120 includes AR-630 coupler and has 1/4" NPTF port
page for optional threaded
• RCH-121 and RCH-1211 have FZ-1630 reducer and saddles and all dimensional
AR-630 coupler, all other models feature CR-400 coupler information.
Page: 29
Hollow plunger cylinder RCH-1003 used in an application for intermediate boom

suspension on a dragline.
Cylinder Stroke Model Cyl. Oil

Capacity Number Effect. Cap.
Area
ton (kN) (mm) (cm2) (cm3)
8 RCH-120 17,9 14
42 RCH-121* 17,9 75
13 (125)
42 RCH-1211 17,9 75
76 RCH-123 17,9 136
49 RCH-202* 30,7 150
20 (215)
155 RCH-206 30,7 476
64 RCH-302* 46,6 298
30 (326)
155 RCH-306 46,6 722
76 RCH-603* 82,3 626
60 (576)
153 RCH-606 82,3 1259
95 (931) 76 RCH-1003* 133,0 1011
28
Single-Acting, Hollow Plunger Cylinders
Hoses
Enerpac offers a complete line
RCH
of high quality hydraulic hoses. Series
To ensure the integrity of your
system, specify only Enerpac
hydraulic hoses.
Page: 120
Optional Heat Treated Hollow Saddles Capacity:

Saddle
Type
Cylinder
Model Number
Saddle
Model Nr. A
Saddle Dimensions (mm)
B C
13-95 ton
A
RCH-202, 206 HP-2015 53 1"- 8 9 B Stroke:
Threaded RCH-302, 306 HP-3015 63 11/4"- 7 9
Hollow RCH-603, 606 HP-5016 91 15/8"- 51/2 12
C
8-155 mm
RCH-1003 HP-10016 126 21/2"- 8 13
Center Hole Diameter:
Smooth hollow saddles are standard on all RCH-models (except RCH-120, RCH-1211).
19,6 - 79,0 mm
RCH-121 and RCH-1211 have a W
47 mm dia. boss that protrudes J Maximum Operating Pressure:
6 mm from base. O
700 bar
W
P
O
P F K
F
X
X B Base Mounting Hole Dimensions (mm)
B Model Bolt Thread Thread
* 3/8"- 3/8"- A Number Circle Depth
E A E V Z
18NPTF 18NPTF U
Z RCH-120 50,8 5
/16"- 18 UNC 9,0
Z RCH-121 – – –
H H RCH-1211 – – –
RCH-123 50,8 5
/16" - 18 UNC 12,7
V RCH-202 82,6 3
/8"- 16 UNC 9,4
V
RCH-206 82,6 3
/8" - 16 UNC 9,4
RCH-302 92,2 3
/8" - 16 UNC 14,0
RCH-306 92,2 3
/8" - 16 UNC 14,0
Y U D
Y U D RCH-603 130,3 1
/2" - 13 UNC 14,0
RCH-606 130,3 1
/2" - 13 UNC 14,0
RCH-1003 177,8 5
/8" - 11 UNC 19,0
RCH-120 to RCH-123 models RCH-202 to RCH-1003 models

* 1/4” NPT for RCH-120 only
Coll. Ext. Out. Cyl. Plgr. Cyl. Base Saddle Saddle Plunger Plunger Collar Collar Center Model
Height Height Dia. Bore Dia. to Advance Dia. Protrusion Internal Thread Thread Thread Hole Number
Dia. Port from Plgr. Thread Length Length Dia.
A B D E F H J K O P W X Y
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
55 63 69 54,1 35,1 9 – – / "- 16 UN
3 4 16 2 / "- 16
3 4 30 19,6 1,5 RCH-120
120 162 69 54,1 35,1 19 – – – – 23/4"- 16 30 19,6 2,8 RCH-121*
3/4"
120 162 69 54,1 35,1 19 – – - 16 UN 16 23/4"- 16 30 19,6 2,8 RCH-1211
184 260 69 54,1 35,1 19 – – – – 23/4"- 16 30 19,6 4,4 RCH-123
162 211 98 73,1 54,1 19 54 9,7 9 "
1 /16 - 16 UN 19 37/8"- 12 38 26,9 7,7 RCH-202*
306 461 98 73,1 54,1 25 54 9,7 19/16"- 16 UN 19 37/8"- 12 38 26,9 14,1 RCH-206
178 242 114 88,9 63,5 21 63 9,0 113/16"- 16 UN 22 41/2"- 12 42 33,3 10,9 RCH-302*
330 485 114 88,9 63,5 25 63 9,0 113/16"- 16 UN 22 41/2"- 12 42 33,3 21,8 RCH-306
247 323 159 123,9 91,9 31 91 12,0 23/4"- 16 UN 19 61/4"- 12 48 53,8 28,1 RCH-603*
323 476 159 123,9 91,9 31 91 12,0 23/4"- 16 UN 19 61/4"- 12 48 53,8 35,4 RCH-606
254 330 212 165,1 127,0 38 126 12,0 4"- 16 UN 25 83/8"- 12 60 79,0 63,0 RCH-1003*
www.enerpac.com 29
RRH-Series, Hollow Plunger Cylinders Hydraulic Technology Worldwide
Shown from left to right: RRH-3010, RRH-1001, RRH-6010
Versatility in Testing,
Maintenance
and Tensioning
Applications
Pump Selection
A double-acting cylinder
must be powered by a pump
with a 4-way valve.
Page: 67
Gauges
• Relief valves prevent damage in case of over-pressurisation overloading and ensure long,
• Baked enamel finish for increased corrosion resistance your equipment. Refer to the
• Collar threads enable easy fixturing System Components Section for a full
(except RRH-1001 and RRH-1508) range of gauges.
• Double-acting version for fast retraction Page: 119

• Nickel-plated, floating center tube increases product life
Saddles
• Hollow plunger allows for both pull and push forces
All RRH-Series cylinders are
• CR-400 coupler and dust cap included on all models equipped with smooth
• Plunger wiper reduces contamination, extending saddles. See table at next
cylinder life page for optional threaded
saddles and all dimensional
information.
Page: 31
Double-acting hollow plunger cylinders are Cylinder Stroke Model Max. Cylinder Cylinder Effective Oil Capacity
applied for bridge launching systems. Capacity Number Capacity Area
(kN) (cm2) (cm3)
ton (mm) Advance Retract Advance Retract Advance Retract
178 RRH-307 326 213 46,6 30,4 829 541

30
258 RRH-3010 326 213 46,6 30,4 1202 784
89 RRH-603 576 380 82,3 54,2 733 482
60 166 RRH-606 576 380 82,3 54,2 1366 900
257 RRH-6010 576 380 82,3 54,2 2115 1393
38 RRH-1001 931 612 133,0 87,4 505 333
76 RRH-1003 931 612 133,0 87,4 1011 666
95
153 RRH-1006 931 612 133,0 87,4 2035 1337
257 RRH-10010 931 612 133,0 87,4 3420 2246
145 203 RRH-1508 1429 718 204,1 102,6 4144 2083
30
Double-Acting, Hollow Plunger Cylinders
Hoses RRH
Enerpac offers a complete Series
integrity of your system,
Page: 120
Capacity:
Optional Heat TreatedHollow Saddles
Saddle Cylinder Saddle Saddle Dimensions (mm)
30 -145 ton
Type Model Number Model Nr. A B C Stroke:
RRH-307, 3010 HP-3015 63 11/4"- 7 9 A
Threaded RRH-603, 606, 6010 HP-5016 91 15/8"- 51/2 12
C
B 38 - 258 mm
Hollow RRH-1001, 1003,
HP-10016 126 21/2"- 8 13 Center Hole Diameter:
RRH-1006, 10010
Smooth hollow saddles are standard on all RRH-models. 33,3 - 79,2 mm
W
J 700 bar
O
F K
I X
B
Base Mounting Hole Dimensions (mm)
A
Model Bolt Thread Thread
3/8"- E Number Circle Depth
18NPTF U V Z
Z RRH-307 92,2 3 8
/ " - 16 15,7
H RRH-3010 92,2 3 8
/ " - 16 15,7
RRH-603 130,0 1/2 - 13
" 14,0
V RRH-606 130,0 1/2 - 13
" 14,0
RRH-6010 130,0 1/
2" - 13 14,0
RRH-1001 177,8 5/8 - 11
" 19,0
RRH-1003 177,8 5/8 - 11
" 19,0
Y U D 177,8 19,0
RRH-1006 5/
8" - 11
30° RRH-10010 177,8 5/8 - 11

" 19,0
RRH-1508 – – –
Coll. Ext. Out. Cyl. Plgr. Cyl. Base Cyl. Top Saddle Saddle Thread Plunger Collar Collar Center Model
Height Height Dia. Bore Dia. to Adv. to Return Dia. Protr. Thread Thread Thread Hole Number
Dia. Port Port fr. Plgr. Length Length Dia.
A B D E F H I J K O P W X Y
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
330 508 114 88,9 63,5 25 60 63 9 113/16"- 16 22 1

4 /2"- 12 42 33,3 21 RRH-307
431 689 114 88,9 63,5 25 60 63 9 113/16"- 16 22 41/2"- 12 42 33,3 27 RRH-3010
247 336 159 123,9 91,9 31 66 91 12 23/4"- 16 19 61/4"- 12 48 53,8 28 RRH-603
323 489 159 123,9 91,9 31 66 91 12 23/4"- 16 19 61/4"- 12 48 53,8 35 RRH-606
438 695 159 123,9 91,9 31 66 91 12 23/4"- 16 19 61/4"- 12 48 53,8 45 RRH-6010
165 203 212 165,1 127,0 38 44 126 12 4"- 16 25 – – 79,2 33 RRH-1001
254 330 212 165,1 127,0 38 85 126 12 4"- 16 25 3
8 /8"- 12 60 79,2 61 RRH-1003
342 495 212 165,1 127,0 38 85 126 12 4"- 16 25 83/8"- 12 60 79,2 79 RRH-1006
460 717 212 165,1 127,0 38 85 126 12 4"- 16 25 83/8"- 12 60 79,2 106 RRH-10010
349 552 247 190,5 152,4 38 60 127 4 41/4"- 12 25 – – 79,2 111 RRH-1508
www.enerpac.com 31
BRD-Series, Precision Production Cylinders Hydraulic Technology Worldwide
Shown from left to right: BRD-2510, BRD-96, BRD-256, BRD-41, BRD-166
High Precision
and High Cycle
Performance
Speed Chart
See the Enerpac Cylinder Speed
Chart in our ’Yellow Pages’ to
cylinder speed.
Page: 117
Golden Ring Design

Enerpac BRD-Cylinders are
provided with the Golden Ring Design,
for long, trouble-free performance.
• Designed for long life, the best choice for production Clamping application using Enerpac BRD
applications cylinders (with clevis eye attachments on both
ends) for their high pressure capability and
• Unique mounting configurations simplify fixturing mounting flexibility.

• Double-acting operation develops force in both
directions, providing maximum versatility
cylinder life
• Imperial models (RD-series) available on request
Cylinder Stroke Model Max. Cylinder Cylinder Effective Oil Capacity Coll. Ext. Body Out. Cyl. Bore Plgr.
Capacity Number Capacity Area Height Height Length Dia. Dia. Dia.
(kN) (cm2) (cm3)
A B C D E F
(ton) (mm) Advance Retract Advance Retract Advance Retract (mm) (mm) (mm) (mm) (mm) (mm)
28 BRD-41 35 16 5,1 2,2 14 6 186 214 162 50 25,4 19,0
4 79 BRD-43 35 16 5,1 2,2 40 17 237 316 213 50 25,4 19,0
155 BRD-46 35 16 5,1 2,2 79 34 313 468 289 50 25,4 19,0
28 BRD-91 80 44 11,4 6,3 32 18 223 251 198 65 38,1 25,4
79 BRD-93 80 44 11,4 6,3 90 50 274 353 249 65 38,1 25,4
8
155 BRD-96 80 44 11,4 6,3 177 98 350 505 325 65 38,1 25,4
257 BRD-910 80 44 11,4 6,3 293 162 452 709 427 65 38,1 25,4
159 BRD-166 142 77 20,3 10,6 323 169 389 548 359 80 50,8 35,0
15
260 BRD-1610 142 77 20,3 10,6 528 276 491 751 461 80 50,8 35,0
159 BRD-256 222 98 31,7 13,7 504 218 424 583 397 92 63,5 47,8
23
260 BRD-2510 222 98 31,7 13,7 824 356 526 786 499 92 63,5 47,8
32
Double-Acting, Precision Production Cylinders
BRD CYLINDER ATTACHMENTS
BRD
E D Series
C B A
Retainer Nut
For locking foot or flange
mountings. Tightens onto
Capacity:
cylinder collar threads
(Included with foot and
flange mounting kits).
4-23 ton
E H E D
Stroke:
E D
28-260 mm
C B A C Maximum Operating Pressure:
C B A
H
D F
F
B A
700 bar
Foot Mounting Flange Mounting Clevis Eye
Clevis Eye (optional)
Mounts onto cylinder Mounts onto cylinder Threads onto plunger or
collar. collar. into cylinder base.
Q
Model BRD-Cyl. Dimensions (mm) P
Number (ton) A B C D E F H
Foot Mounting with Retainer Nut
F
BAD-141 4 42,1 80 58,0 10,5 20,0 57,0 31,8
BAD-171 8 56,1 105 78,0 13,5 25,0 82,5 44,5 W
BAD-181 15 70,1 127 95,2 20,0 35,0 100,0 52,4 K X
BAD-191 23 85,1 159 117,5 26,5 45,0 125,0 63,5
Flange Mounting with Retainer Nut N
BAD-142 4 42,1 98,4 78,6 11,0 19,0 – – H
BAD-172 8 56,1 121 98,4 11,0 25,4 – – L1 B
3/8"-18NPTF
BAD-182 15 70,1 143 115,9 16,0 35,0 – –
BAD-192 23 85,1 159 135,7 17,0 44,5 – – L
Retainer Nut A
C E
BAD-143 4 M42 x 1,5 57 49,5 6,3 9,5 – –
BAD-173 8 M56 x 2 75 65,5 6,7 12,7 – –
BAD-183 15 M70 x 2 92 81,0 6,7 19,0 – –
BAD-193 23 M85 x 2 108 96,5 6,7 25,4 – –
Clevis Eye (see chart below for mounting dimensions L, L1 and M) I
N
BAD-150 4 M16 x 1,5 M30 x 1,5 52,4 16,0 15,9 19,1 23,8
BAD-151 8 M22 x 1,5 M42 x 1,5 57,1 20,0 25,4 25,4 23,8 X Z Z1
BAD-152 15 M30 x 1,5 M56 x 2 77,8 25,0 31,8 25,4 30,2 M W
BAD-153 23 M42 x 1,5 M70 x 2 77,8 32,0 38,2 25,4 27,0 D
Top to Bottom to Plunger Clevis Eye Neck Plunger Plunger Cylinder Mounting Dimensions (mm) Model
Retract Advance Protrusion Mounting Length Thread External Collar Collar Int. Base Int. Base Number
Port Port Dimensions Length Thread Thread Thread Thread Thread
H I K L L1 M N P Q Length Length
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) W X Z Z1 (kg)
47 47 24 258 286 41 29 22 M16 x 1,5 M42 x 1,5 11 M30 x 1,5 9 2,0 BRD-41
47 47 24 308 387 41 29 22 M16 x 1,5 M42 x 1,5 11 M30 x 1,5 9 2,6 BRD-43
47 47 24 385 540 41 29 22 M16 x 1,5 M42 x 1,5 11 M30 x 1,5 9 3,6 BRD-46
57 57 25 295 323 38 38 22 M22 x 1,5 M56 x 2 14 M42 x 1,5 14 3,0 BRD-91
57 57 25 346 425 38 38 22 M22 x 1,5 M56 x 2 14 M42 x 1,5 14 4,2 BRD-93
57 57 25 422 577 38 38 22 M22 x 1,5 M56 x 2 14 M42 x 1,5 14 5,6 BRD-96
57 57 25 524 781 38 38 22 M22 x 1,5 M56 x 2 14 M42 x 1,5 14 7,3 BRD-910
73 73 30 492 651 52 54 28 M30 x 1,5 M70 x 2 22 M56 x 2 24 10,2 BRD-166
73 73 30 593 853 52 54 28 M30 x 1,5 M70 x 2 22 M56 x 2 24 14,5 BRD-1610
89 89 27 524 683 53 70 25 M42 x 1,5 M85 x 2 29 M70 x 2 26 16,0 BRD-256
89 89 27 626 886 53 70 25 M42 x 1,5 M85 x 2 29 M70 x 2 26 20,3 BRD-2510
www.enerpac.com 33
RR-Series, Double-Acting Cylinders Hydraulic Technology Worldwide
Shown from left to right: RR-10013, RR-1502, RR-20013, RR-1010, RR-7513
Most Versatile
Performers
Rugged enough for the
toughest job site uses and
precision designed for high-
cycle industrial uses
Saddles
RR-Series cylinders up to 75
ton have plunger mounting
holes for installation of CAT-
Series tilt saddles.
Page: 35
• Collar threads, plunger threads and base mounting holes
for easy fixturing (on most models) Remote Lifting
• Removable hardened saddles protect plunger during lifting ZE-Series electric pumps.
and pressing
A double-acting cylinder must be
• Built-in safety valve prevents accidental powered by a pump with a 4-way valve.
over-pressurization
• CR-400 couplers included on all models
• Plunger wiper reduces contamination, extending Page: 90
cylinder life
These long stroke RR-cylinders are attached in a sliding and guiding system pulling the RR-cylinders provide power and precision in a
arched roof assembly of Athens Olympic Stadium step by step into the final position. special hydraulic press.
34
Double-Acting Long Stroke Cylinders
Cylinder retract valve pressure settings:
capacity for certain RR RR-308/3014: 275 bar RR
cylinders may be less RR-506/5013/5020: 480 bar Series
than theoretical values, RR-756/7513: 495 bar
as a result of reduced relief
QUICK SELECTION CHART

Capacity:
Cylinder Stroke
Capacity
Model
Number
Cylinder Effective
Area
Oil Capacity Coll.
Height 10 - 520 ton
(cm2) (cm3) Stroke:
ton
(kN) (mm) Push Pull Push Pull (mm) 57-1219 mm
10 254 RR-1010* 14,5 4,8 368 122 409
(101) 305 RR-1012* 14,5 4,8 442 147 457
30 209 RR-308* 42,1 19,1 879 400 387 700 bar
(295) 368 RR-3014* 42,1 19,1 1549 703 549
156 RR-506 71,2 21,5 1111 335 331
50 Enerpac CLRG-Series
334 RR-5013 71,2 21,5 2378 718 509
(498) If your application does not
511 RR-5020 71,2 21,5 3638 1099 733
require high cycle, Enerpac
75 156 RR-756 102,6 31,4 1601 490 347 CLRG-Series cylinders may
(718) 333 RR-7513 102,6 31,4 3417 1046 525 be the right alternative.
168 RR-1006 133,3 62,2 2238 1045 357
95
333 RR-10013 133,3 62,2 4439 2071 524
Page: 46
(933)
460 RR-10018 133,3 62,2 6132 2861 687
57 RR-1502 198,1 95,4 1129 544 196 Speed Chart
140 156 RR-1506 198,1 95,4 3090 1488 385 See the Enerpac Cylinder Speed
(1386) 333 RR-15013 198,1 95,4 6597 3177 582 Chart in our ’Yellow Pages’ to
815 RR-15032 198,1 95,4 16145 7775 1116
cylinder speed.
152 RR-2006 285,0 145,3 4332 2209 430
330 RR-20013 285,0 145,3 9405 4795 608 Page: 117
200 457 RR-20018 285,0 145,3 13025 6640 765
(1995) 610 RR-20024 285,0 145,3 17385 8863 917
Optional Snap-in Saddles
914 RR-20036 285,0 145,3 26049 13280 1222
Optional snap-in saddles for
1219 RR-20048 285,0 145,3 34741 17712 1527
RR-Series double-acting
153 RR-3006 457,3 243,2 6997 3721 485 cylinders:
305 RR-30012 457,3 243,2 13947 7418 638
325 457 RR-30018 457,3 243,2 20889 11114 790 Saddle Cylinder Model Saddle
(3201) 609 RR-30024 457,3 243,2 27850 14811 943 Type Number Model
915 RR-30036 457,3 243,2 41843 22253 1247 Number
1219 RR-30048 457,3 243,2 55745 29646 1552 Flat RR-1010, 1012 A-102F
152 RR-4006 613,1 328,1 9319 4987 538 RR-1010, 1012 CAT-10
305 RR-40012 613,1 328,1 18700 10007 690 RR-308, 3014 CAT-50
440 457 RR-40018 613,1 328,1 28018 14995 843 Tilt RR-506, 5013
(4292) 610 RR-40024 613,1 328,1 37400 20014 995 RR-5020, 756 CAT-100
914 RR-40036 613,1 328,1 56037 29988 1300 RR-7513
1219 RR-40048 613,1 328,1 74737 39996 1605 Standard Saddles:
153 RR-5006 729,7 405,4 11164 6203 577 RR-1010, 1012 A-102G
305 RR-50012 729,7 405,4 22256 12365 730 Grooved
RR-308, 3014 A-252G
520 457 RR-50018 729,7 405,4 33347 18526 882
(5108) 609 RR-50024 729,7 405,4 44440 24689 1035 For additional information on saddles:
915 RR-50036 729,7 405,4 66768 36973 1339
1219 RR-50048 729,7 405,4 88951 49418 1644 Page: 12
www.enerpac.com 35
RR-Series, Double-Acting Cylinders Hydraulic Technology Worldwide
J
O Cylinder retract capacity for
certain RR cylinders may be
P
less than theoretical values,
as a result of reduced relief
F
valve pressure settings:
W K
RR-308/3014: 275 bar
X
RR-506/5013/5020: 480 bar
N
I RR-756/7513: 495 bar
B For full features see previous page.
A Cylinder Stroke Model Max. Cylinder Cylinder Oil Capacity Coll. Ext. Outside
Capacity Number Capacity Effective Area Height Height Dia.
3/8"-
18NPTF E (kN) (cm2) (cm3)
A B D
ton (mm) Push Pull Push Pull Push Pull (mm) (mm) (mm)
H 254 RR-1010* 101 33 14,5 4,8 368 0122 409 663 73
10
D 305 RR-1012* 101 33 14,5 4,8 442 147 457 762 73
RR-1010 - RR-3014 209 RR-308* 295 53 42,1 19,1 879 400 387 596 101
30
368 RR-3014* 295 53 42,1 19,1 1549 703 549 917 101
W 156 RR-506 498 103 71,2 21,5 1111 335 331 487 127
50
J 334 RR-5013 498 103 71,2 21,5 2378 718 509 843 127
O 733 1244 127
511 RR-5020 498 103 71,2 21,5 3638 1099
156 RR-756 718 156 102,6 31,4 1601 490 347 503 146
P 75
333 RR-7513 718 156 102,6 31,4 3417 1046 525 858 146
F K 168 RR-1006 933 435 133,3 62,2 2238 1045 357 525 177
95 333 RR-10013 933 435 133,3 62,2 4439 2071 524 857 177
X 460 RR-10018 933 435 133,3 62,2 6132 2861 687 1147 177
I
B 57 RR-1502 1386 668 198,1 95,4 1129 544 196 253 203
156 RR-1506 1386 668 198,1 95,4 3090 1488 385 541 203
140
A 333 RR-15013 1386 668 198,1 95,4 6597 3177 582 915 203
3/8"- E 815 RR-15032 1386 668 198,1 95,4 16145 7775 1116 1931 203
18NPTF
152 RR-2006 1995 1017 285,0 145,3 4332 2209 430 582 247
330 RR-20013 1995 1017 285,0 145,3 9405 4795 608 938 247
H Z 457 RR-20018 1995 1017 285,0 145,3 13025 6640 765 1222 247
D 200
610 RR-20024 1995 1017 285,0 145,3 17385 8863 917 1527 247
RR-506 - RR-50048 914 RR-20036 1995 1017 285,0 145,3 26049 13280 1222 2136 247
1219 RR-20048 1995 1017 285,0 145,3 34741 17712 1527 2746 247
V
153 RR-3006 3201 1703 457,3 243,2 6997 3721 485 638 311
U 305 RR-30012 3201 1703 457,3 243,2 13947 7418 638 943 311
457 RR-30018 3201 1703 457,3 243,2 20889 11114 790 1247 311
325
609 RR-30024 3201 1703 457,3 243,2 27850 14811 943 1552 311
RR-1006 - RR-30048 915 RR-30036 3201 1703 457,3 243,2 41843 22253 1247 2162 311
1219 RR-30048 3201 1703 457,3 243,2 55745 29646 1552 2771 311
No mounting holes on:
RR-506, 5013 152 RR-4006 4292 2297 613,1 328,1 9319 4987 538 690 358
RR-756, 7513
RR-1502, 15013
305 RR-40012 4292 2297 613,1 328,1 18700 10007 690 995 358
V 457 RR-40018 4292 2297 613,1 328,1 28018 14995 843 1300 358
440
610 RR-40024 4292 2297 613,1 328,1 37400 20014 995 1605 358
914 RR-40036 4292 2297 613,1 328,1 56037 29988 1300 2214 358
U 1219 RR-40048 4292 2297 613,1 328,1 74737 39996 1605 2824 358
153 RR-5006 5108 2838 729,7 405,4 11164 6203 577 730 397
305 RR-50012 5108 2838 729,7 405,4 22256 12365 730 1035 397
RR-4006 - RR-50048 457 RR-50018 5108 2838 729,7 405,4 33347 18526 882 1339 397
520
609 RR-50024 5108 2838 729,7 405,4 44440 24689 1035 1644 397
Base mounting hole location is 915 RR-50036 5108 2838 729,7 405,4 66768 36973 1339 2254 397
for reference only, as it is affected
by assembly. 1219 RR-50048 5108 2838 729,7 405,4 88951 49418 1644 2863 397
* For RR-1010 and RR-1012: N = 32 mm; for RR-308 and RR-3014: N = 55 mm.
36
Double-Acting Long Stroke Cylinders
Couplers Included! Capacity:
CR-400 couplers 10 - 520 ton RR
included on all Series
models. Fits all HC- Stroke:
Series hoses. 57-1219 mm
700 bar
Cyl. Plgr. Base Top to Saddle Saddle Plunger Plunger Base Mounting Holes Collar Collar Model
Bore Dia. to Adv. Ret. Dia. Protr. Internal Thread Bolt C. Thread Thd. Thread Thread Number
Dia. Port Port fr. Plgr. Thread Length Dia. Depth Length
E F H I J K O P U V Z W X
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
42,9 34,9 36 57 35 6 1"- 8 25 – – – 21/4"- 14 26 12 RR-1010*
42,9 34,9 36 57 35 6 1"- 8 25 – – – 21/4"- 14 26 14 RR-1012*
73,2 54,1 39 81 50 10 1 /2"- 16
1 25 – – – 35/16"- 12 49 18 RR-308*
73,2 54,1 39 81 50 10 11/2"- 16 25 – – – 35/16"- 12 49 29 RR-3014*
95,2 79,5 28 76 71 2 1"- 12 25 – – – 5"- 12 44 30 RR-506
95,2 79,5 28 76 71 2 1"- 12 25 – – – 5"- 12 44 52 RR-5013
95,2 79,5 57 76 71 2 1"- 12 25 76 1/2"
- 13 25 5"- 12 44 68 RR-5020
114,3 95,2 30 76 71 6 1"- 12 38 – – – 53/4"- 12 38 41 RR-756
114,3 95,2 30 81 71 6 1"- 12 38 – – – 53/4"- 12 38 68 RR-7513
130,3 95,2 38 71 76 3 13/4"- 12 35 139 3/4"
- 10 25 67/8"- 12 50 61 RR-1006
130,3 95,2 38 71 76 3 13/4"- 12 35 139 3/4"
- 10 25 67/8"- 12 50 93 RR-10013
130,3 95,2 41 92 76 3 13/4"- 12 35 139 3/4"
- 10 25 67/8"- 12 50 117 RR-10018
158,8 114,3 22 66 114 19 – – – – – – – 49 RR-1502
158,8 114,3 49 84 114 19 33/8"- 16 35 158 3/4"
- 16 28 8"- 12 55 93 RR-1506
158,8 114,3 49 84 114 19 33/8"- 16 35 158 3/4"
- 16 28 8"- 12 55 124 RR-15013
158,8 114,3 76 88 114 19 33/8"- 16 35 – – – 8"- 12 55 238 RR-15032
190,5 133,4 57 96 133 22 – – 127 1"- 8 25 – – 147 RR-2006
190,5 133,4 57 96 133 22 21/2"- 12 63 127 1"- 8 25 93/4"- 12 54 199 RR-20013
190,5 133,4 85 101 133 22 21/2"- 12 63 127 1"- 8 25 93/4"- 12 54 204 RR-20018
190,5 133,4 85 101 133 22 21/2"- 12 63 127 1"- 8 25 93/4"- 12 54 279 RR-20024
190,5 133,4 85 101 133 22 21/2"- 12 63 127 1"- 8 25 93/4"- 12 54 383 RR-20036
190,5 133,4 85 101 133 22 21/2"- 12 63 127 1"- 8 25 93/4"- 12 54 483 RR-20048
241,3 165,1 88 114 165 28 21/2"- 12 82 158 11/4"- 7 44 121/4"- 12 58 200 RR-3006
241,3 165,1 88 114 165 28 21/2"- 12 82 158 11/4"- 7 44 121/4"- 12 58 312 RR-30012
241,3 165,1 88 114 165 28 21/2"- 12 82 158 11/4"- 7 44 121/4"- 12 58 385 RR-30018
241,3 165,1 88 114 165 28 21/2"- 12 82 158 11/4"- 7 44 121/4"- 12 58 469 RR-30024
241,3 165,1 88 114 165 28 21/2"- 12 82 158 11/4"- 7 44 121/4"- 12 58 628 RR-30036
241,3 165,1 88 114 165 28 21/2"- 12 82 158 11/4"- 7 44 121/4"- 12 58 780 RR-30048
279,4 190,5 108 133 190 28 3"- 12 95 203 11/2"- 6 50 141/8"- 8 65 303 RR-4006
279,4 190,5 108 133 190 28 3"- 12 95 203 11/2"- 6 50 141/8"- 8 65 399 RR-40012
279,4 190,5 108 133 190 28 3"- 12 95 203 11/2"- 6 50 141/8"- 8 65 453 RR-40018
279,4 190,5 108 133 190 28 3"- 12 95 203 11/2"- 6 50 141/8"- 8 65 597 RR-40024
279,4 190,5 108 133 190 28 3"- 12 95 203 11/2"- 6 50 141/8"- 8 65 792 RR-40036
279,4 190,5 108 133 190 28 3"- 12 95 203 11/2"- 6 50 141/8"- 8 65 980 RR-40048
304,8 203,2 120 152 203 28 31/4"- 12 108 203 13/4"- 5 57 155/8"- 8 79 432 RR-5006
304,8 203,2 120 152 203 28 31/4"- 12 108 203 13/4"- 5 57 155/8"- 8 79 589 RR-50012
304,8 203,2 120 152 203 28 31/4"- 12 108 203 13/4"- 5 57 155/8"- 8 79 680 RR-50018
304,8 203,2 120 152 203 28 31/4"- 12 108 203 13/4"- 5 57 155/8"- 8 79 816 RR-50024
304,8 203,2 120 152 203 28 31/4"- 12 108 203 13/4"- 5 57 155/8"- 8 79 1002 RR-50036
304,8 203,2 120 152 203 28 31/4"- 12 108 203 13/4"- 5 57 155/8"- 8 79 1224 RR-50048
www.enerpac.com 37
CLSG-Series, High Tonnage Cylinders Hydraulic Technology Worldwide
Shown from left to right: CLSG-506, CLSG-5006, CLSG-4006
The Single-Acting
Heavy Lifting
Solution with
Integral Stop Ring
Saddles
All CLSG-Series cylinders
are equipped with bolt-on
For information on optional
tilt saddles, see selection chart.
Page: 41
Gauges
• Integral stop ring provides piston blow-out protection System Components Section for a full
range of gauges.
• Baked enamel outside finish and plated pistons provide
superior corrosion protection Page: 119
• Unique bearing design withstands sideload forces up to
10% of rated cylinder capacity without scoring Remote Lifting
• Interchangeable, hardened grooved saddles are standard For heavy lifting in remote
• Base mounting holes are standard on all models locations use the Enerpac
ZE-series electric pumps.
• Plunger wiper reduces contamination, extending cylinder
life
• Single-acting, load return Page: 90
Eight CLSG-2506 equipped with tilting saddles lifted the planking of the bridge as the pier
heads were being rebuilt.
Low Height - High Tonnage
When low height with high
force is required, CLP-Series
Pancake Cylinders with lock-
nut offer the solution to lift
the first few centimetres.
Page: 22
Standard Features
• Interchangeable, hardened
grooved saddles
• Top and side mounted lifting eyes
• CR-400 coupler and dustcap
• All cylinders meet ASME B-30.1 and
38
Single-Acting, High Tonnage Cylinders
CLSG
Series


Capacity Number Effective Capacity Height
Area
Capacity:
ton
(kN) (mm) (cm2) (cm3) (mm) (kg)
50-1000 ton
50 CLSG-502 77,0 385 162 17 Stroke:
100 CLSG-504 77,0 770 212 20 50 - 300 mm
50 150 CLSG-506 77,0 1155 262 23
(539) 200 CLSG-508 77,0 1540 312 27
250 CLSG-5010 77,0 1924 362 31 700 bar
300 CLSG-5012 77,0 2309 412 34
50 CLSG-1002 132,7 664 182 19
Higher Capacities
100 CLSG-1004 132,7 1327 232 29
100 150 CLSG-1006 132,7 1991 282 40 1500 and 2000 ton models
(929) available on request.
200 CLSG-1008 132,7 2655 332 50
250 CLSG-10010 132,7 3318 382 61 Additional Stroke Lengths
300 CLSG-10012 132,7 3982 432 71 Models above 150 ton are also available
50 CLSG-1502 198,6 993 196 39 with standard stroke lengths of 100, 200
100 CLSG-1504 198,6 1986 246 52 and 250 mm. Please contact Enerpac for
150 150 CLSG-1506 198,6 2978 296 65 ordering information.
(1390) 200 CLSG-1508 198,6 3971 346 78
250 CLSG-15010 198,6 4964 396 92
300 CLSG-15012 198,6 5957 446 105
50 CLSG-2002 265,9 1330 216 55 Lifting an Unbalanced
200 150 CLSG-2006 265,9 3989 316 91 Load
(1861)
300 CLSG-20012 265,9 7977 466 146 When lifting an unbalanced
50 CLSG-2502 366,4 1832 235 102 load Enerpac Integrated
250 Lifting Systems can be the
150 CLSG-2506 366,4 5497 335 136
(2565) solution with multiple lift point
300 CLSG-25012 366,4 10993 485 207
capabilities from 4 to 64 points. See our
50 CLSG-3002 456,2 2281 312 184
300 “Yellow Pages” for multi-cylinder set-
150 CLSG-3006 456,2 6843 412 232 ups.
(3193)
300 CLSG-30012 456,2 13685 562 303
50 CLSG-4002 559,9 2800 375 270 Page: 54
400 150 CLSG-4006 559,9 8399 475 330
(3919)
300 CLSG-40012 559,9 16797 625 421 Optional features
50 CLSG-5002 730,6 3653 419 401 To add optional features to
500
150 CLSG-5006 730,6 10959 519 480 your cylinders, add the
(5114)
300 CLSG-50012 730,6 21918 669 599 following suffixes to the end of
50 CLSG-6002 855,3 4276 429 474 the model number.
600
(5987) 150 CLSG-6006 855,3 12829 529 565
Collar thread * E002
300 CLSG-60012 855,3 25659 679 701
50 CLSG-8002 1176,3 5881 474 741 * On 400 ton models and higher.
800
150 CLSG-8006 1176,3 17644 574 880 Example:
(8234)
300 CLSG-80012 1176,3 35288 724 1058 • For CLSG-5006 cylinder with collar
50 CLSG-10002 1465,7 7329 564 1062 thread, order: CLSG-5006E002
1000 Technical specifications for these
150 CLSG-10006 1465,7 21986 664 1213
(10260) features are available from Enerpac.
300 CLSG-100012 1465,7 43972 814 1439
www.enerpac.com 39
CLSG-Series, High Tonnage Cylinders Hydraulic Technology Worldwide
Speed Chart
Chart in our ‘Yellow Pages’
section.
30°
Page: 117
For full features see previous page.
F K
Capacity Number Effective Capacity
J
Area
L ton
(kN) (mm) (cm2) (cm3)
B
50 CLSG-502 77,0 385
3/8"- E A 100 CLSG-504 77,0 770
18NPTF
50 150 CLSG-506 77,0 1155
(539) 200 CLSG-508 77,0 1540
H Z
250 CLSG-5010 77,0 1924
V
U 300 CLSG-5012 77,0 2309
D 50 CLSG-1002 132,7 664
CLSG-502 - CLSG-15012 100 CLSG-1004 132,7 1327
100 150 CLSG-1006 132,7 1991
(929) 200 CLSG-1008 132,7 2655
60°
250 CLSG-10010 132,7 3318
300 CLSG-10012 132,7 3982
50 CLSG-1502 198,6 993
100 CLSG-1504 198,6 1986
150 150 CLSG-1506 198,6 2978
(1390) 200 CLSG-1508 198,6 3971
K
250 CLSG-15010 198,6 4964
F
J 300 CLSG-15012 198,6 5957
50 CLSG-2002 265,9 1330
L 200 150 CLSG-2006 265,9 3989
(1861)
B 300 CLSG-20012 265,9 7977
50 CLSG-2502 366,4 1832
A 250
3/8"- E 150 CLSG-2506 366,4 5497
(2565)
18NPTF 300 CLSG-25012 366,4 10993
50 CLSG-3002 456,2 2281
H Z 300 150 CLSG-3006 456,2 6843
V (3193)
U
300 CLSG-30012 456,2 13685
D 50 CLSG-4002 559,9 2800
400 150 CLSG-4006 559,9 8399
(3919)
CLSG-2002 - CLSG-100012 300 CLSG-40012 559,9 16797
Base Mounting Hole 1) Dimensions (mm) 50 CLSG-5002 730,6 3653
500
Model / Bolt Thread Min. Thread 150 CLSG-5006 730,6 10959
(5114)
Capacity Circle Size Depth 300 CLSG-50012 730,6 21918
ton U V Z
50 CLSG-6002 855,3 4276
CLSG-50 65 2x M12 22 600
CLSG-100 95 2x M12 22 (5987) 150 CLSG-6006 855,3 12829
CLSG-150 130 2x M12 22 300 CLSG-60012 855,3 25659
CLSG-200 165 3x M12 22 50 CLSG-8002 1176,3 5881
CLSG-250 190 3x M12 22 800
CLSG-300 180 3x M16 30 150 CLSG-8006 1176,3 17644
(8234)
CLSG-400 205 3x M16 30 300 CLSG-80012 1176,3 35288
CLSG-500 250 3x M24 36 50 CLSG-10002 1465,7 7329
CLSG-600 275 3x M24 36 1000
150 CLSG-10006 1465,7 21986
CLSG-800 330 3x M24 36 (10260)
CLSG-1000 375 3x M24 36 300 CLSG-100012 1465,7 43972
1) Base mounting holes are random positioned in
regard to coupler position.

40
Optional Tilt Saddle * Capacity:
J1 50-1000 ton CLSG
0-5˚
Stroke: Series
K1
50 -300 mm
700 bar
Collapsed Extended Outside Cylinder Plunger Base to Standard Saddle Depth of Model * Optional Tilt Saddle
Height Height Dia. Bore Dia. Adv. Saddle Protr. Plunger Number Saddle Saddle Saddle
Dia. Port Dia. from Plgr. Hole Dia. Height Model
A B D E F H J K L J1 K1 Number
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg) (mm) (mm)
162 212 130 99,0 70,0 52 50 1 19 17 CLSG-502 50 24 CATG-50
212 312 130 99,0 70,0 52 50 1 19 20 CLSG-504 50 24 CATG-50
262 412 130 99,0 70,0 52 50 1 19 23 CLSG-506 50 24 CATG-50
312 512 130 99,0 70,0 52 50 1 19 27 CLSG-508 50 24 CATG-50
362 612 130 99,0 70,0 52 50 1 19 31 CLSG-5010 50 24 CATG-50
412 712 130 99,0 70,0 52 50 1 19 34 CLSG-5012 50 24 CATG-50
182 232 165 130,0 95,0 54 75 1 19 19 CLSG-1002 73 29 CATG-100
232 332 165 130,0 95,0 54 75 1 19 29 CLSG-1004 73 29 CATG-100
282 432 165 130,0 95,0 54 75 1 19 40 CLSG-1006 73 29 CATG-100
332 532 165 130,0 95,0 54 75 1 19 50 CLSG-1008 73 29 CATG-100
382 632 165 130,0 95,0 54 75 1 19 61 CLSG-10010 73 29 CATG-100
432 732 165 130,0 95,0 54 75 1 19 71 CLSG-10012 73 29 CATG-100
196 246 205 159,0 114,0 61 94 1 19 39 CLSG-1502 91 31 CATG-150
246 346 205 159,0 114,0 61 94 1 19 52 CLSG-1504 91 31 CATG-150
296 446 205 159,0 114,0 61 94 1 19 65 CLSG-1506 91 31 CATG-150
346 546 205 159,0 114,0 61 94 1 19 78 CLSG-1508 91 31 CATG-150
396 646 205 159,0 114,0 61 94 1 19 92 CLSG-15010 91 31 CATG-150
446 746 205 159,0 114,0 61 94 1 19 105 CLSG-15012 91 31 CATG-150
216 266 235 184,0 133,0 67 113 1 24 55 CLSG-2002 118 35 CATG-200
316 466 235 184,0 133,0 67 113 1 24 91 CLSG-2006 118 35 CATG-200
466 766 235 184,0 133,0 67 113 1 24 146 CLSG-20012 118 35 CATG-200
235 285 275 216,0 165,0 73 145 1 24 102 CLSG-2502 144 46 CATG-250
335 485 275 216,0 165,0 73 145 1 24 136 CLSG-2506 144 46 CATG-250
485 785 275 216,0 165,0 73 145 1 24 207 CLSG-25012 144 46 CATG-250
312 362 310 241,0 197,0 101 177 1 19 184 CLSG-3002 160 62 CATG-300
412 562 310 241,0 197,0 101 177 1 19 232 CLSG-3006 160 62 CATG-300
562 862 310 241,0 197,0 101 177 1 19 303 CLSG-30012 160 62 CATG-300
375 425 350 267,0 216,0 114 196 3 27 270 CLSG-4002 193 51 CATG-400
475 625 350 267,0 216,0 114 196 3 27 330 CLSG-4006 193 51 CATG-400
625 925 350 267,0 216,0 114 196 3 27 421 CLSG-40012 193 51 CATG-400
419 469 400 305,0 248,0 114 228 3 27 401 CLSG-5002 228 63 CATG-500
519 669 400 305,0 248,0 114 228 3 27 480 CLSG-5006 228 63 CATG-500
669 969 400 305,0 248,0 114 228 3 27 599 CLSG-50012 228 63 CATG-500
429 479 430 330,0 267,0 114 247 3 27 474 CLSG-6002 241 76 CATG-600
529 679 430 330,0 267,0 114 247 3 27 565 CLSG-6006 241 76 CATG-600
679 979 430 330,0 267,0 114 247 3 27 701 CLSG-60012 241 76 CATG-600
474 524 505 387,0 317,0 149 297 3 27 741 CLSG-8002 287 75 CATG-800
574 724 505 387,0 317,0 149 297 3 27 880 CLSG-8006 287 75 CATG-800
724 1024 505 387,0 317,0 149 297 3 27 1058 CLSG-80012 287 75 CATG-800
564 614 560 432,0 343,0 174 323 3 27 1062 CLSG-10002 311 93 CATG-1000
664 814 560 432,0 343,0 174 323 3 27 1213 CLSG-10006 311 93 CATG-1000
814 1114 560 432,0 343,0 174 323 3 27 1439 CLSG-100012 311 93 CATG-1000
www.enerpac.com 41
CLS-Series, High Tonnage Cylinders Hydraulic Technology Worldwide
Shown from left to right: CLS-1002, CLS-506, CLS-502
The Single-Acting
Heavy Lifting
Solution With
Reduced Collapsed
Height
Saddles
All CLS cylinders are
Page: 45
Gauges
• Lowest collapsed height for use in confined spaces Minimize the risk of
• Overflow port functions as a stroke limiter dependable service from
• Plunger wiper reduces contamination, extending cylinder your equipment. Refer to the
life
range of gauges.
• Interchangeable, hardened grooved saddles are standard
Page: 119
• Special synthetic coating for improved corrosion
resistance and lower friction for smoother operation
Remote Lifting
• Single-acting, load return locations use the Enerpac
CLS-cylinders doing their job, synchronised lifting a complete fly-over
for exact positioning.
Page: 90
Low Height - High Tonnage

When low height with high
force is required, CLP-Series
Pancake Cylinders with lock-
nut offer the solution to lift
the first few centimetres.
Page: 22
Synchronous Lifting
Systems
The solution for multiple lift
point capabilities from 4 to
64 points.
Page: 54
42
CLS
Series


Area
Capacity:
ton
(kN) (mm) (cm2) (cm3) (mm) (kg)
50-1000 ton
50 CLS-502 70,9 355 128 14 Stroke:
100 CLS-504 70,9 709 178 18 50 - 300 mm
50 150 CLS-506 70,9 1064 228 23
(496) 200 CLS-508 70,9 1418 278 28
250 CLS-5010 70,9 1773 327 33 700 bar
300 CLS-5012 70,9 2127 378 38
50 CLS-1002 132,7 664 143 24
100 CLS-1004 132,7 1327 193 32
100 150 CLS-1006 132,7 1991 243 40
(929) 200 CLS-1008 132,7 2654 293 49
250 CLS-10010 132,7 3318 343 58 Higher Capacities
300 CLS-10012 132,7 3981 392 66
1500 and 2000 ton models
50 CLS-1502 198,6 993 165 43 are available on request.
100 CLS-1504 198,6 1986 215 55
150 150 CLS-1506 198,6 2979 265 69
(1390) 200 CLS-1508 198,6 3972 315 82 Additional Stroke Lengths
250 CLS-15010 198,6 4965 365 95 Models above 150 ton are also available
300 CLS-15012 198,6 5958 414 108 with standard stroke lengths of 100, 200
50 CLS-2002 265,6 1330 193 66 and 250 mm. Please contact Enerpac for
200 ordering information.
150 CLS-2006 265,6 3989 293 101
(1859)
300 CLS-20012 265,6 7977 443 154
50 CLS-2502 366,1 1832 193 90
250
150 CLS-2506 366,1 5496 293 137 Lifting an Unbalanced Load?
(2562)
300 CLS-25012 366,1 10996 443 208 See our ‘Yellow Pages’ for
50 CLS-3002 456,2 2281 235 137 multi-cylinder set-ups.
300 150 CLS-3006 456,2 6843 335 198
(3193) Page: 113
300 CLS-30012 456,2 13710 485 288
50 CLS-4002 559,9 2800 265 200 Optional features
400 150 CLS-4006 559,9 8399 365 275
(3919) To add optional features to
300 CLS-40012 559,9 16770 515 390 your cylinders, add the
50 CLS-5002 731,1 3656 295 289 following suffixes to the end of
500 the model number.
150 CLS-5006 731,1 10967 395 390
(5118)
300 CLS-50012 731,1 21900 545 540
50 CLS-6002 854,8 4277 310 350
600 Spring return E001
(5983) 150 CLS-6006 854,8 12830 410 465
300 CLS-60012 854,8 25710 560 640
Example:
50 CLS-8002 1176,9 5882 355 549 • For CLS-5006 cylinder with spring
800
150 CLS-8006 1176,9 17645 455 709 return, order: CLS-5006E001
(8238)
300 CLS-80012 1176,9 35370 605 950
50 CLS-10002 1466,4 7329 385 729 Technical specifications for these
1000 features are available from Enerpac.
150 CLS-10006 1466,4 21986 485 921
(10260)
300 CLS-100012 1466,4 43950 635 1210
www.enerpac.com 43
CLS-Series, High Tonnage Cylinders Hydraulic Technology Worldwide
Couplers Included!
CR-400 couplers
included on all models.
Fit all HC-Series hoses.

Area
ton
(kN) (mm) (cm2) (cm3)
50 CLS-502 70,9 355
F
100 CLS-504 70,9 709
J K
50 150 CLS-506 70,9 1064
(496) 200 CLS-508 70,9 1418
L
B 250 CLS-5010 70,9 1773
300 CLS-5012 70,9 2127
50 CLS-1002 132,7 664
100 CLS-1004 132,7 1327
A
E 100 150 CLS-1006 132,7 1991
3/8"- (929)
18NPTF 200 CLS-1008 132,7 2654
250 CLS-10010 132,7 3318
300 CLS-10012 132,7 3981
H 50 CLS-1502 198,6 993
D 100 CLS-1504 198,6 1986
CLS-502 - CLS-25012 150 150 CLS-1506 198,6 2979
(1390) 200 CLS-1508 198,6 3972
250 CLS-15010 198,6 4965
300 CLS-15012 198,6 5958
50 CLS-2002 265,6 1330
200 150 CLS-2006 265,6 3989
30°
(1859)
300 CLS-20012 265,6 7977
50 CLS-2502 366,1 1832
250
150 CLS-2506 366,1 5496
(2562)
300 CLS-25012 366,1 10996
50 CLS-3002 456,2 2281
300 150 CLS-3006 456,2 6843
(3193)
300 CLS-30012 456,2 13710
F
50 CLS-4002 559,9 2800
400 150 CLS-4006 559,9 8399
J K
(3919)
300 CLS-40012 559,9 16770
L 50 CLS-5002 731,1 3656
B 500
150 CLS-5006 731,1 10967
(5118)
300 CLS-50012 731,1 21900
50 CLS-6002 854,8 4277
600
A 150 CLS-6006 854,8 12830
(5983)
3/8"-
E 300 CLS-60012 854,8 25710
18NPTF 50 CLS-8002 1176,9 5882
800
150 CLS-8006 1176,9 17645
(8238)
300 CLS-80012 1176,9 35370
H
50 CLS-10002 1466,4 7329
D 1000
150 CLS-10006 1466,4 21986
(10260)
CLS-3002 - CLS-100012 300 CLS-100012 1466,4 43950
44
J1 50-1000 ton CLS
0-5˚
Stroke: Series
K1
50 -300 mm
700 bar
Collapsed Extended Outside Cylinder Plunger Base to Standard Saddle Depth of Model * Optional Tilt Saddle
Height Height Dia. Bore Dia. Adv. Saddle Protr. Plunger Number Saddle Saddle Saddle
Dia. Port Dia. from Plgr. Hole Dia. Height Model
A B D E F H J K L J1 K1 Number
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg) (mm) (mm)
128 178 125 95,0 95,0 30 71 2 13 14 CLS-502 71 24 CAT-100
178 278 125 95,0 95,0 30 71 2 13 18 CLS-504 71 24 CAT-100
228 378 125 95,0 95,0 30 71 2 13 23 CLS-506 71 24 CAT-100
278 478 125 95,0 95,0 30 71 2 13 28 CLS-508 71 24 CAT-100
327 578 125 95,0 95,0 30 71 2 13 33 CLS-5010 71 24 CAT-100
378 678 125 95,0 95,0 30 71 2 13 38 CLS-5012 71 24 CAT-100
143 193 165 130,0 130,0 30 71 2 13 24 CLS-1002 71 24 CAT-100
193 293 165 130,0 130,0 30 71 2 13 32 CLS-1004 71 24 CAT-100
243 393 165 130,0 130,0 30 71 2 13 40 CLS-1006 71 24 CAT-100
293 493 165 130,0 130,0 30 71 2 13 49 CLS-1008 71 24 CAT-100
343 593 165 130,0 130,0 30 71 2 13 58 CLS-10010 71 24 CAT-100
392 693 165 130,0 130,0 30 71 2 13 66 CLS-10012 71 24 CAT-100
165 215 205 159,0 159,0 39 130 2 25 43 CLS-1502 130 20 CAT-200
215 315 205 159,0 159,0 39 130 2 25 55 CLS-1504 130 20 CAT-200
265 415 205 159,0 159,0 39 130 2 25 69 CLS-1506 130 20 CAT-200
315 515 205 159,0 159,0 39 130 2 25 82 CLS-1508 130 20 CAT-200
365 615 205 159,0 159,0 39 130 2 25 95 CLS-15010 130 20 CAT-200
414 715 205 159,0 159,0 39 130 2 25 108 CLS-15012 130 20 CAT-200
193 243 235 183,9 183,9 50 130 2 25 66 CLS-2002 130 20 CAT-200
293 443 235 183,9 183,9 50 130 2 25 101 CLS-2006 130 20 CAT-200
443 743 235 183,9 183,9 50 130 2 25 154 CLS-20012 130 20 CAT-200
193 243 275 215,9 215,9 50 150 2 25 90 CLS-2502 150 21 CAT-250
293 443 275 215,9 215,9 50 150 2 25 137 CLS-2506 150 21 CAT-250
443 743 275 215,9 215,9 50 150 2 25 208 CLS-25012 150 21 CAT-250
235 285 310 241,0 241,0 59 139 5 25 137 CLS-3002 195 75 CAT-300
335 485 310 241,0 241,0 59 139 5 25 198 CLS-3006 195 75 CAT-300
485 785 310 241,0 241,0 59 139 5 25 288 CLS-30012 195 75 CAT-300
265 315 350 267,0 267,0 70 159 5 25 200 CLS-4002 225 85 CAT-400
365 515 350 267,0 267,0 70 159 5 25 275 CLS-4006 225 85 CAT-400
515 815 350 267,0 267,0 70 159 5 25 390 CLS-40012 225 85 CAT-400
295 345 400 305,1 305,1 80 179 5 25 289 CLS-5002 250 91 CAT-500
395 545 400 305,1 305,1 80 179 5 25 390 CLS-5006 250 91 CAT-500
545 845 400 305,1 305,1 80 179 5 25 540 CLS-50012 250 91 CAT-500
310 360 430 329,9 329,9 85 194 5 25 350 CLS-6002 275 96 CAT-600
410 560 430 329,9 329,9 85 194 5 25 465 CLS-6006 275 96 CAT-600
560 860 430 329,9 329,9 85 194 5 25 640 CLS-60012 275 96 CAT-600
355 405 505 387,1 387,1 100 224 5 25 549 CLS-8002 320 123 CAT-800
455 605 505 387,1 387,1 100 224 5 25 709 CLS-8006 320 123 CAT-800
605 905 505 387,1 387,1 100 224 5 25 950 CLS-80012 320 123 CAT-800
385 435 560 432,1 432,1 110 249 5 25 729 CLS-10002 360 136 CAT-1000
485 635 560 432,1 432,1 110 249 5 25 921 CLS-10006 360 136 CAT-1000
635 935 560 432,1 432,1 110 249 5 25 1210 CLS-100012 360 136 CAT-1000
www.enerpac.com 45
CLRG-Series, High Tonnage Cylinders Hydraulic Technology Worldwide
Shown from left to right: CLRG-506, CLRG-5006, CLRG-4006
Double-Acting
Power Lifters
Saddles
All CLRG cylinders are
Page: 49
Safety Device
A pilot-operated check valve
(V-42) can be inserted
between cylinder and pump.
This valve provides a safety
lock on the cylinder under load at any
position and remote control for
unlocking.
• Double-acting, for push and pull Page: 138
• Safety valve in retract side of cylinder helps to prevent
damage in case of accidental over-pressurization Low Height - High Tonnage
• Special bearing design withstands sideload forces up to When low height with high
10% of rated cylinder capacity without scoring force is required, Pancake
Cylinders with locknut offer
• Plunger wiper reduces contamination, extending the solution to lift the first
cylinder life few centimetres.
• CR-400 coupler and dust cap included on all models Page: 22
• Baked enamel finish and plated pistons provide superior
corrosion resistance Standard Features
• Interchangeable, hardened
grooved saddles
• Top and side mounted lifting eyes
CLRG-cylinders supported and positioned these automobile deck elements.
• CR-400 coupler and dustcap
• All cylinders meet ASME B-30.1 and
Replacing adjustment rolls under a fly-over

with CLRG cylinders, for controlled lifting and
lowering.
46
Double-Acting, High Tonnage Cylinders
RR-series
For loads below 50 ton Enerpac
CLRG
RR-series cylinders are a good Series
alternative.
Page: 34

Capacity Number Effective Area Capacity Height
Capacity:
(cm2) (cm3)
ton 50-1000 ton
(kN) (mm) Push Pull Push Pull (mm)
Stroke:
50 CLRG-502 77,0 38,5 385 192 162
100 CLRG-504 77,0 38,5 770 385 212 50 - 300 mm
50 150 CLRG-506 77,0 38,5 1155 577 262
(539) 200 CLRG-508 77,0 38,5 1540 770 312
250 CLRG-5010 77,0 38,5 1924 962 362
700 bar
300 CLRG-5012 77,0 38,5 2309 1155 412
50 CLRG-1002 132,7 61,9 664 309 179
100 CLRG-1004 132,7 61,9 1327 619 229
100 150 CLRG-1006 132,7 61,9 1991 928 279
Pump Selection
(929) 200 CLRG-1008 132,7 61,9 2655 1237 329
A double-acting cylinder
250 CLRG-10010 132,7 61,9 3318 1546 379
must be powered by a pump
300 CLRG-10012 132,7 61,9 3982 1856 429 with a 4-way valve.
50 CLRG-1502 198,6 96,5 993 482 196
100 CLRG-1504 198,6 96,5 1986 965 246 Page: 67
150 150 CLRG-1506 198,6 96,5 2978 1447 296
(1390) 200 CLRG-1508 198,6 96,5 3971 1930 346 Higher Capacities
250 CLRG-15010 198,6 96,5 4964 2412 396 1500 and 2000 ton models are
300 CLRG-15012 198,6 96,5 5957 2895 446 available on request.
50 CLRG-2002 265,9 127,0 1330 635 212
200 150 CLRG-2006 265,9 127,0 3989 1905 312 Additional Stroke Lengths
(1861) Models above 150 ton are also available
300 CLRG-20012 265,9 127,0 7977 3809 462
with standard stroke lengths of 100, 200
50 CLRG-2502 366,4 152,6 1832 763 235
250 and 250 mm. Please contact Enerpac for
150 CLRG-2506 366,4 152,6 5497 2289 335 ordering information.
(2565)
300 CLRG-25012 366,4 152,6 10993 4578 485
50 CLRG-3002 456,2 151,4 2281 757 322
300 150 CLRG-3006 456,2 151,4 6843 2270 422
(3193)
300 CLRG-30012 456,2 151,4 13685 4541 572 Optional features
50 CLRG-4002 559,9 193,5 2800 967 374
To add optional features to
400 150 CLRG-4006 559,9 193,5 8399 2902 474 your cylinders, add the
(3919)
300 CLRG-40012 559,9 193,5 16797 5804 624 following suffixes to the end of
50 CLRG-5002 730,6 247,6 3653 1238 419 the model number.
500 150 CLRG-5006 730,6 247,6 10959 3713 519
(5114) Collar thread * E002
300 CLRG-50012 730,6 247,6 21918 7427 669
50 CLRG-6002 855,3 295,4 4276 1477 429 Plunger thread E003
600 150 CLRG-6006 855,3 295,4 12829 4431 529 Collar * and plunger thread E005
(5987)
300 CLRG-60012 855,3 295,4 25659 8862 679 * On 400 ton and higher
50 CLRG-8002 1176,3 387,0 5881 1935 484 Example:
800 150 CLRG-8006 1176,3 387,0 17644 5806 584 • For CLRG-5006 cylinder with collar
(8234) thread, order: CLRG-5006E002
300 CLRG-80012 1176,3 387,0 35288 11611 734
50 CLRG-10002 1465,7 541,7 7329 2709 564
Technical specifications for these
1000 150 CLRG-10006 1465,7 541,7 21986 8126 664
300 CLRG-100012 1465,7 541,7 43972 16252 814
www.enerpac.com 47
CLRG-Series, High Tonnage Cylinders Hydraulic Technology Worldwide
Speed Chart
30° Chart in our ‘Yellow Pages’
section.
30°
Page: 117

Cylinder Stroke Model Maximum Cylinder Oil
F K Capacity Number Cylinder Effective Capacity
J Capacity Area
(kN) (cm2) (cm3)
L (ton) (mm)
I Push Pull Push Pull Push Pull
B
50 CLRG-502 539 269 77,0 38,5 385 192
E A 100 CLRG-504 539 269 77,0 38,5 770 385
3/8"-
18NPTF 150 CLRG-506 539 269 77,0 38,5 1155 577
50
200 CLRG-508 539 269 77,0 38,5 1540 770
H Z 250 CLRG-5010 539 269 77,0 38,5 1924 962
V 300 CLRG-5012 539 269 77,0 38,5 2309 1155
U
D 50 CLRG-1002 929 433 132,7 61,9 664 309
CLRG-502 - CLRG-15012 100 CLRG-1004 929 433 132,7 61,9 1327 619
150 CLRG-1006 929 433 132,7 61,9 1991 928
100
200 CLRG-1008 929 433 132,7 61,9 2655 1237
60°
250 CLRG-10010 929 433 132,7 61,9 3318 1546
300 CLRG-10012 929 433 132,7 61,9 3982 1856
50 CLRG-1502 1390 675 198,6 96,5 993 482
30° 100 CLRG-1504 1390 675 198,6 96,5 1986 965
150 CLRG-1506 1390 675 198,6 96,5 2978 1447
150
200 CLRG-1508 1390 675 198,6 96,5 3971 1930
250 CLRG-15010 1390 675 198,6 96,5 4964 2412
F K
300 CLRG-15012 1390 675 198,6 96,5 5957 2895
J
50 CLRG-2002 1861 889 265,9 127,0 1330 635
L 200 150 CLRG-2006 1861 889 265,9 127,0 3989 1905
I
B 300 CLRG-20012 1861 889 265,9 127,0 7977 3809
50 CLRG-2502 2565 1068 366,4 152,6 1832 763
A 150 CLRG-2506 2565 1068 366,4 152,6 5497 2289
3/8"- E 250
18NPTF 300 CLRG-25012 2565 1068 366,4 152,6 10993 4578
50 CLRG-3002 3193 1060 456,2 151,4 2281 757
H Z 300 150 CLRG-3006 3193 1060 456,2 151,4 6843 2270
V 300 CLRG-30012 3193 1060 456,2 151,4 13685 4541
U
50 CLRG-4002 3919 1354 559,9 193,5 2800 967
D
400 150 CLRG-4006 3919 1354 559,9 193,5 8399 2902
CLRG-2002 - CLRG-100012 300 CLRG-40012 3919 1354 559,9 193,5 16797 5804
Base Mounting Hole 1) Dimensions (mm) 50 CLRG-5002 5114 1733 730,6 247,6 3653 1238
Model / Bolt Thread Min. Thread 500 150 CLRG-5006 5114 1733 730,6 247,6 10959 3713
Capacity Circle Size Depth 300 CLRG-50012 5114 1733 730,6 247,6 21918 7427
ton U V Z
50 CLRG-6002 5987 2068 855,3 295,4 4276 1477
CLRG-50 65 2x M12 22
CLRG-100 95 2x M12 22 600 150 CLRG-6006 5987 2068 855,3 295,4 12829 4431
CLRG-150 130 2x M12 22 300 CLRG-60012 5987 2068 855,3 295,4 25659 8862
CLRG-200 165 3x M12 22 50 CLRG-8002 8234 2709 1176,3 387,0 5881 1935
CLRG-250 190 3x M12 22
CLRG-300 180 3x M16 30 800 150 CLRG-8006 8234 2709 1176,3 387,0 17644 5806
CLRG-400 205 3x M16 30 300 CLRG-80012 8234 2709 1176,3 387,0 35288 11611
CLRG-500 250 3x M24 36 50 CLRG-10002 10260 3792 1465,7 541,7 7329 2709
CLRG-600 275 3x M24 36
CLRG-800 330 3x M24 36 1000 150 CLRG-10006 10260 3792 1465,7 541,7 21986 8126
CLRG-1000 375 3x M24 36 300 CLRG-100012 10260 3792 1465,7 541,7 43972 16252
1) Base mounting holes are random positioned in
regard to coupler position.

48
Double-Acting, High Tonnage Cylinders
Capacity:
J1
0-5˚
50-1000 ton CLRG
K1 Stroke: Series
50 -300 mm
* Optional Tilt Saddle Maximum Operating Pressure:
700 bar
Collaps. Extend. Outside Cyl. Plunger Base to Top to Standard Saddle Depth of Model Optional Tilt Saddle *
Height Height Dia. Bore Dia. Advance Retract Saddle Protr. Plunger Number Saddle Saddle Saddle
Dia. Port Port Dia. from Plgr. Hole Dia. Height Model
A B D E F H I J K L J1 K1 Number
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg) (mm) (mm)
162 212 130 99 70 52 33 50 1 19 17 CLRG-502 50 24 CATG-50
212 312 130 99 70 52 33 50 1 19 20 CLRG-504 50 24 CATG-50
262 412 130 99 70 52 33 50 1 19 23 CLRG-506 50 24 CATG-50
312 512 130 99 70 52 33 50 1 19 27 CLRG-508 50 24 CATG-50
362 612 130 99 70 52 33 50 1 19 31 CLRG-5010 50 24 CATG-50
412 712 130 99 70 52 33 50 1 19 34 CLRG-5012 50 24 CATG-50
179 229 165 130 95 54 48 75 1 19 29 CLRG-1002 73 29 CATG-100
229 329 165 130 95 54 48 75 1 19 34 CLRG-1004 73 29 CATG-100
279 429 165 130 95 54 48 75 1 19 40 CLRG-1006 73 29 CATG-100
329 529 165 130 95 54 48 75 1 19 46 CLRG-1008 73 29 CATG-100
379 629 165 130 95 54 48 75 1 19 52 CLRG-10010 73 29 CATG-100
429 729 165 130 95 54 48 75 1 19 58 CLRG-10012 73 29 CATG-100
196 246 205 159 114 61 56 94 1 19 39 CLRG-1502 91 31 CATG-150
246 346 205 159 114 61 56 94 1 19 52 CLRG-1504 91 31 CATG-150
296 446 205 159 114 61 56 94 1 19 65 CLRG-1506 91 31 CATG-150
346 546 205 159 114 61 56 94 1 19 78 CLRG-1508 91 31 CATG-150
396 646 205 159 114 61 56 94 1 19 92 CLRG-15010 91 31 CATG-150
446 746 205 159 114 61 56 94 1 19 105 CLRG-15012 91 31 CATG-150
212 262 235 184 133 67 66 113 1 24 55 CLRG-2002 118 35 CATG-200
312 462 235 184 133 67 66 113 1 24 91 CLRG-2006 118 35 CATG-200
462 762 235 184 133 67 66 113 1 24 146 CLRG-20012 118 35 CATG-200
235 285 275 216 165 73 78 145 1 24 89 CLRG-2502 144 46 CATG-250
335 485 275 216 165 73 78 145 1 24 136 CLRG-2506 144 46 CATG-250
485 785 275 216 165 73 78 145 1 24 207 CLRG-25012 144 46 CATG-250
322 372 310 241 197 101 75 177 1 19 184 CLRG-3002 160 62 CATG-300
422 572 310 241 197 101 75 177 1 19 232 CLRG-3006 160 62 CATG-300
572 872 310 241 197 101 75 177 1 19 303 CLRG-30012 160 62 CATG-300
374 424 350 267 216 114 105 196 3 27 270 CLRG-4002 193 51 CATG-400
474 624 350 267 216 114 105 196 3 27 330 CLRG-4006 193 51 CATG-400
624 924 350 267 216 114 105 196 3 27 421 CLRG-40012 193 51 CATG-400
419 469 400 305 248 114 135 228 3 27 401 CLRG-5002 228 63 CATG-500
519 669 400 305 248 114 135 228 3 27 480 CLRG-5006 228 63 CATG-500
669 969 400 305 248 114 135 228 3 27 599 CLRG-50012 228 63 CATG-500
429 479 430 330 267 114 135 247 3 27 474 CLRG-6002 241 76 CATG-600
529 679 430 330 267 114 135 247 3 27 565 CLRG-6006 241 76 CATG-600
679 979 430 330 267 114 135 247 3 27 701 CLRG-60012 241 76 CATG-600
484 534 505 387 317 149 135 297 3 27 741 CLRG-8002 287 75 CATG-800
584 734 505 387 317 149 135 297 3 27 868 CLRG-8006 287 75 CATG-800
734 1034 505 387 317 149 135 297 3 27 1058 CLRG-80012 287 75 CATG-800
564 614 560 432 343 174 170 323 3 27 1062 CLRG-10002 311 93 CATG-1000
664 814 560 432 343 174 170 323 3 27 1213 CLRG-10006 311 93 CATG-1000
814 1114 560 432 343 174 170 323 3 27 1439 CLRG-100012 311 93 CATG-1000
www.enerpac.com 49
CLL-Series, Lock Nut Cylinders Hydraulic Technology Worldwide
Shown from left to right: CLL-5010, CLL-502, CLL-1006
To Secure Loads
Mechanically
Saddles
All CLL cylinders are
tilt saddles, see selection chart at
next page.
Page: 53
Gauges
• Single-acting, load return System Components Section for a full
• Safety Lock Nut for mechanical load holding range of gauges.
• Special synthetic coating for improved corrosion Page: 119

resistance and lower friction for smoother operation
• Withstands sideload forces up to 5% of rated cylinder Low Height - High Tonnage
capacity without scoring When low height with high
• Overflow port functions as a stroke limiter force is required, Pancake
Cylinders with lock nut offer
• Interchangeable, hardened grooved saddles are standard the solution to lift the first
• CR-400 coupler and dust cap included on all models few centimetres.
Page: 22
For this curved bridge, CLL-cylinders were used to support the concrete beams, to CLL cylinder, mechanically locked, after
level the pierhead and to place 4000 ton slide bearings between pier and pierhead. positioning the curved bridge.
50
Single-Acting, Lock Nut Cylinders
CLL
Series


Area
Capacity:
ton
(kN) (mm) (cm2) (cm3) (mm) (kg)
50-1000 ton
50 CLL-502 70,9 355 164 15 Stroke:
100 CLL-504 70,9 709 214 20 50 - 300 mm
50 150 CLL-506 70,9 1064 264 25
(496) 200 CLL-508 70,9 1418 314 30
250 CLL-5010 70,9 1773 364 35 700 bar
300 CLL-5012 70,9 2127 414 40
50 CLL-1002 132,7 664 187 30
Higher Capacities
100 CLL-1004 132,7 1327 237 39
1500 and 2000 ton models
100 150 CLL-1006 132,7 1991 287 48 are available on request.
(929) 200 CLL-1008 132,7 2654 337 56
250 CLL-10010 132,7 3318 387 64 Additional Stroke Lengths
300 CLL-10012 132,7 3981 437 73 Models above 150 ton are also available
50 CLL-1502 198,6 993 209 53 with standard stroke lengths of 100, 200
100 CLL-1504 198,6 1986 259 66 and 250 mm. Please contact Enerpac for
ordering information.
150 150 CLL-1506 198,6 2979 309 78
(1390) 200 CLL-1508 198,6 3972 359 92
250 CLL-15010 198,6 4965 409 104
300 CLL-15012 198,6 5958 459 117 Lifting an Unbalanced Load?
50 CLL-2002 265,6 1330 243 83 See our ‘Yellow Pages’ for
200 150 CLL-2006 265,6 3989 343 117 multi-cylinder set-ups.
(1859)
300 CLL-20012 265,6 7995 493 170
Page: 113
50 CLL-2502 366,1 1832 249 116
250
150 CLL-2506 366,1 5496 349 162
(2562)
300 CLL-25012 366,1 10995 499 234 Speed Chart
50 CLL-3002 456,2 2281 295 173 See the Cylinder Speed Chart in
300 150 CLL-3006 456,2 6843 395 233 our ‘Yellow Pages’ section to
(3193) determine the approximate
300 CLL-30012 456,2 13740 545 323
cylinder speed.
50 CLL-4002 559,9 2800 335 250 Page: 117
400 150 CLL-4006 559,9 8399 435 327
(3919)
300 CLL-40012 559,9 16800 585 441 Optional features
50 CLL-5002 731,1 3653 375 367 To add optional features to
500
150 CLL-5006 731,1 10959 475 466 your cylinders, add the
(5118)
300 CLL-50012 731,1 21930 625 617 following suffix to the end of
50 CLL-6002 854,8 4277 395 446 the model number.
600
(5983) 150 CLL-6006 854,8 12830 495 562
Spring return E001
300 CLL-60012 854,8 25650 645 737
50 CLL-8002 1176,9 5882 455 709 Example:
800 • For CLL-5006 cylinder with spring
150 CLL-8006 1176,9 17645 555 870
(8238)
300 CLL-80012 1176,9 35370 705 1110 return, order: CLL-5006E001
50 CLL-10002 1466,4 7329 495 949
1000 Technical specifications for these
150 CLL-10006 1466,4 21986 595 1141
300 CLL-100012 1466,4 43980 745 1430
www.enerpac.com 51
CLL-Series, Lock Nut Cylinders Hydraulic Technology Worldwide
Couplers Included!
CR-400 couplers included on
all models. Fit all HC-Series
hoses.

Area
ton
(kN) (mm) (cm2) (cm3)
50 CLL-502 70,9 355
100 CLL-504 70,9 709
F
K 50 150 CLL-506 70,9 1064
J
(496) 200 CLL-508 70,9 1418
L 250 CLL-5010 70,9 1773
S B
300 CLL-5012 70,9 2127
50 CLL-1002 132,7 664
100 CLL-1004 132,7 1327
A 100 150 CLL-1006 132,7 1991
(929) 200 CLL-1008 132,7 2654
3/8"-
18NPTF 250 CLL-10010 132,7 3318
E
300 CLL-10012 132,7 3981
50 CLL-1502 198,6 993
H
100 CLL-1504 198,6 1986
D 150 150 CLL-1506 198,6 2979
CLL-502 - CLL-25012 (1390) 200 CLL-1508 198,6 3972
250 CLL-15010 198,6 4965
300 CLL-15012 198,6 5958
50 CLL-2002 265,6 1330
30° 200 150 CLL-2006 265,6 3989
(1859)
300 CLL-20012 265,6 7995
50 CLL-2502 366,1 1832
250
150 CLL-2506 366,1 5496
(2562)
300 CLL-25012 366,1 10995
50 CLL-3002 456,2 2281
300 150 CLL-3006 456,2 6843
(3193)
300 CLL-30012 456,2 13740
F 50 CLL-4002 559,9 2800
K 400 150 CLL-4006 559,9 8399
J
(3919)
300 CLL-40012 559,9 16800
L 50 CLL-5002 731,1 3653
S B 500
150 CLL-5006 731,1 10959
(5118)
300 CLL-50012 731,1 21930
50 CLL-6002 854,8 4277
A 600
(5983) 150 CLL-6006 854,8 12830
3/8"- 300 CLL-60012 854,8 25650
18NPTF 50 CLL-8002 1176,9 5882
E
800
150 CLL-8006 1176,9 17645
(8238)
H 300 CLL-80012 1176,9 35370
50 CLL-10002 1466,4 7329
D 1000
150 CLL-10006 1466,4 21986
(10260)
CLL-3002 - CLL-100012 300 CLL-100012 1466,4 43980
52
Single-Acting, Lock Nut Cylinders
J1
50-1000 ton CLL
0-5˚ Stroke: Series
K1
50 - 300 mm
700 bar
Coll. Ext. Outs. Cyl. Plunger Base to Standard Saddle Depth of Lock- Model * Optional Tilt Saddle
Height Height Dia. Bore Dia. Adv. Saddle Protr. Plunger nut Number Saddle Saddle Saddle
Dia. (threaded) Port Dia. from Plgr. Hole Height Dia. Height Model
A B D E F H J K L S J1 K1 Number
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg) (mm) (mm)
164 214 125 95,0 Tr 95 x 4 30 71 2 13 36 15 CLL-502 71 24 CAT-100
214 314 125 95,0 Tr 95 x 4 30 71 2 13 36 20 CLL-504 71 24 CAT-100
264 414 125 95,0 Tr 95 x 4 30 71 2 13 36 25 CLL-506 71 24 CAT-100
314 514 125 95,0 Tr 95 x 4 30 71 2 13 36 30 CLL-508 71 24 CAT-100
364 614 125 95,0 Tr 95 x 4 30 71 2 13 36 35 CLL-5010 71 24 CAT-100
414 714 125 95,0 Tr 95 x 4 30 71 2 13 36 40 CLL-5012 71 24 CAT-100
187 237 165 130,0 Tr 130 x 6 30 71 2 13 44 30 CLL-1002 71 24 CAT-100
237 337 165 130,0 Tr 130 x 6 30 71 2 13 44 39 CLL-1004 71 24 CAT-100
287 437 165 130,0 Tr 130 x 6 30 71 2 13 44 48 CLL-1006 71 24 CAT-100
337 537 165 130,0 Tr 130 x 6 30 71 2 13 44 56 CLL-1008 71 24 CAT-100
387 637 165 130,0 Tr 130 x 6 30 71 2 13 44 64 CLL-10010 71 24 CAT-100
437 737 165 130,0 Tr 130 x 6 30 71 2 13 44 73 CLL-10012 71 24 CAT-100
209 259 205 159,0 Tr 159 x 6 39 130 2 25 44 53 CLL-1502 130 20 CAT-200
259 359 205 159,0 Tr 159 x 6 39 130 2 25 44 66 CLL-1504 130 20 CAT-200
309 459 205 159,0 Tr 159 x 6 39 130 2 25 44 78 CLL-1506 130 20 CAT-200
359 559 205 159,0 Tr 159 x 6 39 130 2 25 44 92 CLL-1508 130 20 CAT-200
409 659 205 159,0 Tr 159 x 6 39 130 2 25 44 104 CLL-15010 130 20 CAT-200
459 759 205 159,0 Tr 159 x 6 39 130 2 25 44 117 CLL-15012 130 20 CAT-200
243 293 235 184,0 Tr 184 x 6 50 130 2 25 50 83 CLL-2002 130 20 CAT-200
343 493 235 184,0 Tr 184 x 6 50 130 2 25 50 117 CLL-2006 130 20 CAT-200
493 793 235 184,0 Tr 184 x 6 50 130 2 25 50 170 CLL-20012 130 20 CAT-200
249 299 275 216,0 Tr 216 x 6 50 150 2 25 56 116 CLL-2502 150 21 CAT-250
349 499 275 216,0 Tr 216 x 6 50 150 2 25 56 162 CLL-2506 150 21 CAT-250
499 799 275 216,0 Tr 216 x 6 50 150 2 25 56 234 CLL-25012 150 21 CAT-250
295 345 310 241,0 Tr 241 x 6 59 139 5 25 60 173 CLL-3002 195 75 CAT-300
395 545 310 241,0 Tr 241 x 6 59 139 5 25 60 233 CLL-3006 195 75 CAT-300
545 845 310 241,0 Tr 241 x 6 59 139 5 25 60 323 CLL-30012 195 75 CAT-300
335 385 350 267,0 Tr 266 x 6 70 159 5 25 70 250 CLL-4002 225 85 CAT-400
435 585 350 267,0 Tr 266 x 6 70 159 5 25 70 327 CLL-4006 225 85 CAT-400
585 885 350 267,0 Tr 266 x 6 70 159 5 25 70 441 CLL-40012 225 85 CAT-400
375 425 400 305,0 Tr 305 x 6 80 179 5 25 80 367 CLL-5002 250 91 CAT-500
475 625 400 305,0 Tr 305 x 6 80 179 5 25 80 466 CLL-5006 250 91 CAT-500
625 925 400 305,0 Tr 305 x 6 80 179 5 25 80 617 CLL-50012 250 91 CAT-500
395 445 430 330,0 Tr 330 x 6 85 194 5 25 85 446 CLL-6002 275 96 CAT-600
495 645 430 330,0 Tr 330 x 6 85 194 5 25 85 562 CLL-6006 275 96 CAT-600
645 945 430 330,0 Tr 330 x 6 85 194 5 25 85 737 CLL-60012 275 96 CAT-600
455 505 505 387,0 Tr 387 x 6 100 224 5 25 100 709 CLL-8002 320 123 CAT-800
555 705 505 387,0 Tr 387 x 6 100 224 5 25 100 870 CLL-8006 320 123 CAT-800
705 1005 505 387,0 Tr 387 x 6 100 224 5 25 100 1110 CLL-80012 320 123 CAT-800
495 545 560 432,0 Tr 432 x 6 110 249 5 25 110 949 CLL-10002 360 136 CAT-1000
595 745 560 432,0 Tr 432 x 6 110 249 5 25 110 1141 CLL-10006 360 136 CAT-1000
745 1045 560 432,0 Tr 432 x 6 110 249 5 25 110 1430 CLL-100012 360 136 CAT-1000
www.enerpac.com 53
SLS-Series, Synchronous Systems Hydraulic Technology Worldwide
Typical layout for a 4 points synchronous lifting system.
Controlled
Hydraulic
Movement
Typical Synchronous Lifting

Applications
• Bridge lifting and repositioning

• Bridge launching
• Lifting and lowering of heavy
equipment
• Leveling of existing structures and
buildings
• Structural testing
• Lifting and weighing of oil platforms
• Tunnel jacking and pushing.
See www.enerpac.com for more

application information.
• 4 to 64 points, load and stroke monitored and controlled
• Capacities from 10 up to 1000 ton per lifting point
• Up to 1 mm accuracy over full plunger stroke
• PLC-control unit with user-friendly touch screen Heavy Lifting Cylinders
For a complete line of
• Automatic data storage and read-out for reporting and
double-acting cylinders see
graphical representation the Enerpac Cylinder
• System secured with warning and stop features to achieve Overview.
optimal safety.
Page: 7
System Options:
• Load and force measurement
• Load cells for precise force measurement up to 0,1% of full
scale One of the world’s first and largest lifting jobs
for maintenance of a 3500 ton mining dragline
• Digital stroke sensors for: was successfully done with an Enerpac
- up to 0,1 mm accuracy over full stroke synchronous hydraulic system: exact aligning
- up to max. 1 km distance between control unit and of bearings on the rail on which this dragline
rotates.
lifting points
• Two-axis tilting control to level structures
• Oil heater or heat exchanger for extreme conditions.
54
Multiple Points Synchronous Lift System
Typical layout for a 4 points synchronous lifting system.
8 7 SLS
Series
Capacity Per Lifting Point:

10 - 1000 ton
Maximum Stroke:
5000 mm
6 5 4 3 2 1
Accuracy Over Full Stroke:
Hydraulic pump Hydraulic hoses
PLC-control with touch screen Sensor cables Up to 0,1 mm
Hydraulic cylinders Solenoid control valves Maximum Operating Pressure:

Stroke sensors Pressure transducer
700 bar
Bridge lifting and Contact Enerpac!
launching system. The
load is balanced on Contact your distributor or the
groups of CLL-Series Enerpac office nearest to you for
lock nut cylinders. The advice and technical assistance in
hydraulic lifting, the layout of your ideal Lift System. You
launching and
can also ask Enerpac for assistance by
balancing movements
are synchronized with e-mail at info@enerpac.com.
PLC-control.
Enerpac synchronous lifting system with PLC-

control unit used to lift temporary support
towers during launching of the Millau Viaduct
in France.
Basic & Premium System Management & Control Features

X = Standard, O = Optional
Features Basic Premium

Analog stroke sensors X X
Digital stroke sensors – O
Stroke controlled movement X X
Load controlled movement – X
Max. accuracy (depends on components) ± 1,0 mm ± 0,1 mm
Recording capabilities – X
Graphical representation – O
Intercommunication capabilities – O
Sensor cables X X
Alarms Basic Premium

Stroke limitation X X
Load limitation – X
Low oil level – X
Oil filter warning – X
Oil temperature warning – X
www.enerpac.com 55
BLS, SL-Series, Stage-Lift Systems Hydraulic Technology Worldwide
250 ton Double-Acting Aluminium Stage-Lift Cylinder (with optional stroke sensor)
Solution For
Longer Distances
Stage-Lift Systems
Stage-Lift Systems overcome
the usual limitation of lift height
imposed by the cylinder’s
plunger stroke length. Large objects can
be lifted, held and lowered for
maintenance where other lifting methods
are impractical.
Typical Stage-Lift Applications

• Tank jacking and lowering
• Lifting of buildings and structures
• Synchronized jacking
• Ship lifts
See www.enerpac.com for more

application information.
• Allows heavy duty lifting over long distances
• PLC-controlled synchronized stage-lifting
• Double-acting jacks with solid plunger design using
Enerpac RAR, RR and CLRG-Series Synchronous Systems
When lifting an unbalanced
• Double-acting jacks with hollow plunger design using
load Enerpac PLC-controlled
Enerpac RRH-Series Synchronous Systems can
• Lifting capacities from 10 to 1000 ton per lift point be the solution with multiple
lift point capabilities from 4 to 64 points.
Page: 54
PLC-controlled hydraulic movement: Enerpac stage -ift systems lift and lower the Each climbing unit consists of two 70 tons
umbrella deck on the world's largest concrete block builder with 0,01 mm accuracy, double-acting cylinders and two 20 tons
provided by 30 hydraulic climbing units in an integrated hydraulic system. locking cylinders.
56
Double-Acting, Stage-Lift Systems
This 55 meters long absorber was hydraulically lifted and lowered prior to
BLS
transportation by ship. The Enerpac PLC-controlled stage-lift system was the ideal
solution because the use of cranes was not possible.
SL
Series
Capacity Per Lift Point:

10 - 1000 ton
Stroke Per Stage:
50-1219 mm
700 bar
Contact Enerpac!
Contact your distributor or the
Enerpac office nearest to you for
Horizontal stage-lift system: These long stroke RR-Series cylinders are attached to a advice and technical assistance in
sliding and guiding system, pulling the arched roof assembly of Athens Olympic
Stadium step by step into the final position.
the layout of your ideal Lift System. You
can also ask Enerpac for assistance by
e-mail at info@enerpac.com.
To avoid overload
situations, cylinders
should be used within
80% of their maximum
capacity.
Remote Lifting
ZE-series electric pump.
Step 1 Step 2 Page: 90

Stage-Lifting Sequence
Step 1: The Stage-Lift cylinder is
placed on a solid support under the Split Flow Pumps
load (retracted plunger).
Multi-cylinder arrangements
Step 2: Plunger extends, lifting the
can be powered and fully
load and giving clearance to insert synchronised by Enerpac
two outer cribbing blocks under the split-flow pumps.
spreading plate. Page: 96
Step 3 Step 4
Step 3: Plunger retracts, giving
clearance to position the central
Hoses
cribbing blocks which will support the
Enerpac offers a complete line
plunger plate for the next extension.
of high-quality hydraulic
Step 4: Plunger extends, lifting the hoses. To ensure the integrity
load and giving clearance to insert of your system, specify
two new cribbings blocks, placed only Enerpac hydraulic hoses.
crosswise under the spreading plate. Page: 120
www.enerpac.com 57
SHS-Series, SyncHoist Hydraulic Technology Worldwide
4 Points SyncHoist System positioning a steel roof segment
Turns Lifting with

Crane into High
Accuracy Hoisting
and Load Positioning
Typical SyncHoist Functions

and Applications
Functions
• High precision load positioning
• Pre-programmed positioning, tilting
and aligning
• Counterweighing – determining
centre of gravity
Applications
• High precision load manoeuvering, vertically and horizontally – using
• Positioning of roof sections,
one crane
concrete elements, steel structures
• Eliminates the risk of damage from oscillations of wire rope due to • Positioning of turbines,
sudden crane starts/stops transformers, fuel rods
• Vastly improving operating speed and worker safety • Precise machinery loading, mill rod
• Weather conditions play less critical role changes, bearing changes
• Intelligent hydraulics turn lifting into high accuracy hoisting and load • Precise positioning of pipe lines,
positioning system blow out valves
• High accuracy (+/- 1,0 mm) • Positioning and aligning of ship
segments prior to assembly
• 700 bar double-acting push/pull cylinders with parachute valves for
added safety in case of hose rupture or coupler damage See www.enerpac.com for more
• Cost reduction when compared to conventional load positioning application information.
methods.
Three options for system management & control:

• Manual control: stroke control and system warning functions Lifting an Unbalanced Load
• Extended manual control: stroke control, load and stroke display and Visit www.enerpac.com to
system warning functions learn more about SyncHoist.
• PLC-control: fully monitorized system with programmable functions Download the animation to see how it
using touch screen and wireless remote control and system warning works step-by-step.
functions.
The designs of Santiago Calatrava (architect)

often require creative technological solutions.
Enerpac SyncHoist System is one of them and
was used for roof positioning of the Palace of
the Arts in Valencia (Spain). Segments are
hoisted from the ground, being positioned with
four fully monitorized cylinders.
58 www.enerpac.com
SyncHoist - High Precision Load Positioning
Enerpac synchoist systems
SHS
System Load Capacity 240 ton 320 ton 440 ton Series
Max. handing load 1) 4x60 ton 4x80 ton 4x110 ton
Number of lifting points 2) 4 4 4
System reach 1500 mm 1500 mm 1500 mm
Cylinder configuration
Push force @ 90 bar 10,5 ton 14,0 ton 22,0 ton
Pull force @ 700 bar 60,0 ton 80,0 ton 110,0 ton Capacity Per Lifting Point:
Plunger stroke 2) 1500 mm 1500 mm 1500 mm
60 - 110 ton
Pump single-stage Maximum Stroke:
Oil flow at 700 bar 4,0 l/min 4,0 l/min 4,0 l/min
1500 mm
Control options &
Accuracy Over Full Stroke:
system management 3)
Manual option option option +/- 1,0 mm
Extended manual option option option
PLC-control 4) option option option
1)
700 bar
Subject to angle and position of lifting cylinders.
2) Each cylinder equiped with parachute valve for added safety in event of
hose/coupler damage.
Note: Enerpac SyncHoist have standard 4 lifting points. In the event that
more or less lifting points are required, contact your local Enerpac
representative.
3) See chart below for detailed control features.
4) Required for counterweighing (centre of gravity).
Roof lifting of the Auditorium at Tenerife at the

Canary Island – Spain. A 4-points Enerpac
hydraulic SyncHoist system is used for
accurate roof positioning.
Three options for system management and control

Contact Enerpac for the following options.
1. Manual control
• Plunger stroke control
• System warnings for:
– oil level, filter indication, thermal motor protection.
2. Extended manual control

• Plunger stroke control
• Load & stroke display
– maximum cylinder load control setting
3. PLC-control
• Touch screen
• Remote wireless radio control
• Load and stroke monitoring
• Load calculations (centre of gravity)
• Pre-programmable motions and data recording
– maximum cylinder load control setting
– stroke and position control
59
Aluminium and Steel Jacks Hydraulic Technology Worldwide
Shown from left to right: JHA-73, JH-506

JH/JHA
Series
Capacity:
7-150 ton
Stroke:
76 -155 mm
700 bar
Lifting Wedge and Machine

Lifts
Ideal to lift the load the first
few centimeters. The LW-16
Lifting Wedge requires a very
small access gap of only 10 mm.
Page: 172
• Internal relief valve to prevent overloading

Load Skates
• Machined flat front and bottom surfaces permit flush For moving heavy loads
alignment in tight corners easily and safely.
• Chrome plated plungers
• Pumping handle included
Page: 174
• All-directional operation on 7, 15 and 35 ton JHA-series
• Automatic by-pass port to prevent over-extension (JH-series)
Style Jack Stroke Model Jack Collapsed Extended Bottom Plate Plunger Pump
Capacity Number Effective Height Height Dimensions Diameter Speed
Area (W x L)
ton (kN) (mm) (cm2) (mm) (mm) (mm) (mm) (kg)
7 (62) 76 JHA-73 9,6 133 209 73 x 158 30,2 Single 5,0
15 (133) 153 JHA-156 20,3 247 401 92 x 238 41,4 Single 13,2
Conventional
35 (311) 155 JHA-356 45,6 257 412 117 x 254 54,1 Single 18,1
Jacks
75 (667) 153 JHA-756 102,6 285 439 174 x 325 114,3 Single 42,6
150 (1335) 155 JHA-1506 197,9 327 482 241 x 407 158,8 2-Speed 95,3
30 (267) 155 JH-306 38,3 254 409 95 x 242 69,9 Single 26,8
Steel Jacks 50 (445) 154 JH-506 62,1 260 414 127 x 258 88,9 2-Speed 40,8
100 (890) 153 JH-1006 133,1 287 440 181 x 328 130,1 2-Speed 74,4
60
Steel Bottle Jacks
Shown from left to right: EBJ-4GC, EBJ-50GC, EBJL-15GC, EBJ-12GC
EBJ
Series
Capacity:
1,4-90,7 ton
Stroke:
77- 508 mm
700 bar
Screw Feature
Heat treated, adjustable
extension screw with cleated
saddle on selected EBJ
models helps adjusting and
prevents slipping.
• Low handle effort reduces operator fatique

• Fully serviceable
As an alternative to
• Cast pump linkage and beam jacks where the
• Pumping handle included on all models operator is required to
stand remote from the jacking point, see
• Safety relief valve to prevent overload our range of pump-cylinder sets.
• Automatic bypass port to prevent over-extension
• Wiper seal for extended life Page: 64
• Chrome plating on both plungers
Jack Stroke Model Number Additional Collapsed Extended Bottom Plate Plunger Pump Speed
Capacity Screw Height Height Dimensions diameter
Extension WxL
ton (kN) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
1,4 (13) 457 EBJL-15GC - 552 1009 92 x 127 22,3 Single speed 5,8
1,8 (18) 95 EBJ-2GC 70 175 340 96 x 102 22,1 Single speed 3,0
2,7 (27) 508 EBJL-3GC - 668 1176 108 x 140 28,4 Single speed 10,0
10,9 (107) 77 EBJS-12GC 43 155 275 130 x 135 43,2 Single speed 6,6
18,1 (178) 79 EBJS-20GC 41 165 285 145 x 155 53,0 Single speed 9,0
27,2 (267) 175 EBJ-30GC - 285 460 150 x 190 71,1 Single speed 25,8
45,4 (445) 105 EBJ-50GC - 240 345 190 x 255 85,1 Two speed 42,0
90,7 (890) 150 EBJ-100GC - 310 460 240 x 300 124,2 Two speed 90,2
All EBJ-Series Jacks meet or exceed: ANSI, PALD, CE, prEN 1494: 1994 standards.
www.enerpac.com 61
High Temperature & Corrosion Resistant Products Hydraulic Technology Worldwide
From left to right: P-142ALSS, P-392ALSS, V-152NV, V-66NV, RC-256NV, RC-106NV, RC-53NV
Solutions for
maximum corrosion
resistance in extreme
environments
Applications
For use in wet environments such
as food processing, pulp and
paper, mining, construction and
applications in high temperature or in
welding areas.
Cylinders
• Nickel-plated steel
• Viton® seals provide heat and chemical resistance
Aluminium Cylinders
• Collar thread, plunger thread and base mounting holes If you need a higher cylinder
• Plunger wiper reduces contamination, extends cylinder life capacity-to-weight-ratio the
lightweight RAC-Series are
the perfect choice.
Hand Pumps
• Viton® seals provide heat and chemical resistance
• Anodized aluminium pump reservoirs and plastic Page: 14
encapsulated pump bodies
• Stainless steel pump pistons and inserts will not corrode Hoses
or rust Enerpac offers a complete
• Second handle on P-142ALSS for two hand use hoses. To ensure the
• Internal pressure relief valve for overload protection integrity of your system,
• Handles lock for easy carrying
Page: 120
Pressure Relief and Check Valve
• Nickel-plated steel Stainless Steel Gauge
• Viton® seals provide heat and chemical resistance Minimize the risk of
• Check valve V-66NV for load holding
• Pressure relief valve V-152NV limits pressure in hydraulic your equipment. The alloy
circuit steel gauge T6003L is the perfect choice.
Page: 130
62
High Temperature & Corrosion Resistant Products
J Release valve
1/4"-18 NPTF 319 RC
38˚
P
143 V
B
Series
95 28 336
A P-142ALSSS
3/8"- Cylinder Capacity:
18NPTF
Release valve 5 - 25 ton
3/8"-18 NPTF 522 Stroke:
50˚ 54 - 158 mm
177
D 700 bar
120 33 533
RC-Series P-392ALSSS
Multifluid Hand Pumps
22 51 193 max. MP-Series corrosion
ø 38 38 resistant hand pumps for low
pressure filling and high
79
102 pressure testing
51 applications, suitable for a wide range of
57 115 fluids.
89
3/8"-18NPTF 25 3/8"-18NPTF (3x)
Page: 74
V-66NV V-152NV
Single-Acting Cylinders
Cylinder Stroke Model Cylinder Oil Collapsed Extended Outside Saddle
Capacity Number 1) Effective Capacity Height Height Diameter Diameter
at 700 bar Area A B D J
ton (kN) (mm) (cm2) (cm3) (mm) (mm) (mm) (mm) (kg)
5 (45) 76 RC-53NV 6,5 50 165 241 38 25 1,5
54 RC-102NV 14,5 78 121 175 57 57 2,3
10 (101)
156 RC-106NV 14,5 226 247 403 57 57 4,4
25 (232) 158 RC-256NV 33,2 525 273 431 85 85 10,0
1) For more dimensional information see page 10.
Two-Speed Hand Pumps

Pump Usable Model Pressure Oil Displacement Max. Piston
Type Oil Number 1) Rating per stroke Handle Stroke
Capacity (bar) (cm3) Effort
(cm3) 1st stage 2st stage 1st stage 2st stage (kg) (mm) (kg)
Two 327 P-142ALSS 13 700 3,62 0,90 35,4 12,7 2,1

Speed 901 P-392ALSS 13 700 3,62 11,26 42,2- 25,4 4,1
1)
For more hand pump information see page 68.
Manual Valves
Valve Type Model Valve Function
Number 1)
(kg)
Manual Check Valve V-66NV Load holding with cylinders 1,8

Pressure Relief Valve V-152NV Limits pressure in system, adjustment range 55 - 700 bar 1,6
1)
For more information see page 138.
www.enerpac.com 63
SC-Series, Single-Acting Cylinder-Pump Sets Hydraulic Technology Worldwide
Shown cylinder-pump set: SCR-1010H
The Quickest and

Easiest Way to Start
Working Right Away
• Optimum match of individual

components
• All sets are ready-for-use
• Sets include 1,8 m safety hose
and gauge with gauge adaptor
• All hand pumps are two-speed
Speed Chart
Chart in our ‘Yellow Pages’
section.
Page: 117

Set Cylinder Stroke Collapsed
1 Cylinder Selection Capacity Model Height
(See Cylinder Section of this catalog for full product descriptions)
ton (kN) Number (mm) (mm)
5 (45) RC-55 127 215
Single-Acting, General Purpose Cylinders: RC-102 54 121
For maximum versatility. 10 (101) RC-106 156 247
RC-Series RC-1010 257 349
RC-154 101 200
15 (142)
RC-156 152 271
RC-252 50 165
RC-254 102 215
25 (232)
RC-256 158 273
RC-2514 362 476
Page: 8 50 (498) RC-506 159 282
10 (101) RCS-101 38 88
Single-Acting, Low Height Cylinders: 20 (201) RCS-201 45 98
Ideal where space is restricted. 30 (295) RCS-302 62 117
RCS-Series 45 (435) RCS-502 60 122
Page: 24 90 (887) RCS-1002 57 141
13 (125) RCH-121 42 120
Single-Acting, Hollow Cylinders: 20 (215) RCH-202 49 162
For pushing and pulling applications. 30 (326) RCH-302 64 178
RCH-Series 60 (576) RCH-603 76 247
Page: 28 95 (933) RCH-1003 76 254
BRP-106C 151 587
10 (105)
Pull Cylinders: BRP-106L 151 541
For use with subassemblies and modules. - - -
BRP-Series 30 (326)
BRP-306 155 1085
Page: 26 50 (505) BRP-606 152 719
64
Single-Acting Cylinder-Pump Sets
SELECTION EXAMPLE SC
Series
Selected cylinder:
• RC-106, Single-Acting cylinder with
156 mm stroke
Selected pump:
SET SELECTION: • P-392, Lightweight hand pump

Capacity:
Select the cylinder
Set model number:
1
• SCR-106H 5 -95 ton

2 Select the pump
Included:
Stroke:
38 - 362 mm

3 Find the set model
number in the blue
• HC-7206 hose
• GF-10B gauge
• GA-2 adaptor
matrix
700 bar

2 Pump selection 1) Accessories included
Hand Pump Hand Pump Hand Pump Foot Pump Turbo Air Pump Hose Gauge Gauge
Model Model Adaptor
P-142 P-392 P-80 P-392FP PATG-1102N Number Number Model Nr.
SCR-55H – – – – HC-7206 GP-10S GA-4

– SCR-102H – SCR-102FP SCR-102A HC-7206 GF-10B GA-2
– SCR-154H – SCR-154FP SCR-154A HC-7206 GP-10S GA-2
– SCR-156H – SCR-156FP SCR-156A HC-7206 GP-10S GA-2
– – SCR-2514H – SCR-2514A HC-7206 GF-20B GA-2
– – SCR-506H – SCR-506A HC-7206 GF-50B GA-2
– SCL-101H – SCL-101FP SCL-101A HC-7206 GF-10B GA-2
– – SCL-1002H – – HC-7206 GF-510B GA-2
SCH-121H – – – – HB-7206 GF-120B GA-4
– SCH-202H – SCH-202FP SCH-202A HC-7206 GF-813B GA-3
– SCH-302H – SCH-302FP SCH-302A HC-7206 GF-813B GA-3
– – SCH-603H – SCH-603A HC-7206 GF-813B GA-3
– – SCH-1003H – – HC-7206 GP-10S GA-2
– SCP-106CH – SCP-106CFP – HC-7206 GP-10S GA-2
– SCP-106LH – SCP-106LFP – HC-7206 GP-10S GA-2
– – – – – – – –
– – SCP-306H – – HC-7206 GP-10S GA-2
– – SCP-606H – – HC-7206 GP-10S GA-2
1) See the Pump Section in this catalog for full product descriptions.
www.enerpac.com 65
Enerpac Hydraulic Pumps Hydraulic Technology Worldwide
E NERPAC hydraulic pumps are available

3/8" configurations.
in over 1000 different
-18
NP
Whatever your high-pressure pump needs
TF
are... speed, control, intermittent or heavy
duty cycle you will find an Enerpac pump
suited to the application.
G1
/4"
Featuring Hand, Electric, Air and Gasoline
powered models, with multiple reservoir
S
ES
PR
and valve configurations, Enerpac offers the

1
most comprehensive pump line 7available.
6
20
17 8 3 217
25 8
4
38 13
8
i
Pump Selection
For help in selecting the correct
pump for your application, please
review our ‘Yellow Pages’.
If you require further assistance, contact

the Enerpac office located near you.
Page: 110
Torque Wrench Pumps

System matched air and
electric pumps provide
control to operate hydraulic
torque wrenches.
Page: 206
66
Hydraulic Pumps Section Overview
Power Pump Types Maximum Max. Flow Max. Series Page
Source Reservoir at Rated Power
Capacity Pressure Consump-
(litres) (l/min) tion
Lightweight Hand Pumps 2,5 2,5 – P 68

Exclusively from Enerpac (cm /stroke)
3
Steel Hand Pumps 7,4 4,75 – P 70

Low Pressure Hand Pumps 3,3 9,50 P 72
(cm3/stroke)
Manual
Multifluid Hand Pumps – 21,8 – MP 74

Pumping fluids up to 1000 bar (cm3/stroke)
Foot Pump 0,5 2,47 – P 75

For handsfree operation (cm3/stroke)
Ultra-High Pressure Hand Pumps 1,0 2,49 – P/11 76

(cm3/stroke)
Economy Series 3,8 0,32 0,37 PU 78

Compact and Portable (kW)
Submerged Series 5,5 0,27 0,37 PE 80

Powerful and Low-Noise (kW)
Electric
Z-Class Pumps ZU4-Series 40 1,0 1,25 ZU4 84

Portable Pumps (kW)
86
Z-Class Pumps ZE3 to ZE6-Series 40 2,73 5,60 ZE 84
Stationary Pumps (kW)
90
8000- and 9000-Series 80 8,0 9,5 PP 96
High Flow / Split Flow Pumps (kW)
Turbo II Air Hydraulic Pumps 5,0 0,16 340 PAMG 98

The New Air Pump Standard (l/min) PATG
PARG
Air Hydraulic Pumps 1,3 0,13 255 PA 100
Air
Single and Twin-Air Motor 8,0 0,15 510 PAM 101

(l/min)
Air Hydraulic Pumps – 5,0 3000 PAH 102

The Multifluid Pumps with Maximum Flow (l/min)
104
Gaso-
Atlas Series 40 1,64 4,0 PGM

line
Your Gasoline Pump Solution (kW)
www.enerpac.com 67
P-Series, Lightweight Hand Pumps Hydraulic Technology Worldwide
Pumps shown, from top to bottom: P-802, P-842, P-202, P-142
Exclusively from
Enerpac
Cylinder Matching Chart

hand pump for your application,
please refer to the Cylinder Matching
Chart located in the ‘Yellow Pages’.
Page: 110
Speed Chart
To determine how a specific
pump will operate your cylinder,
see the Pump-Cylinder Speed Chart
in the ‘Yellow Pages’.
Page: 117
• Lightweight and compact design Tank Kits:

• Durable glass-filled nylon reservoir and nylon When a return-to-tank port is
encapsulated aluminium pump base for maximum required, the Tank Kits
corrosion resistance provide a 7/16”-20 port at the
rear of the reservoir.
• Two-speed operation reduces handle strokes by
as much as 78% over single speed pumps
PC-20 Fits P-141, P-142
• Lower handle effort to minimize operator fatigue PC-25 Fits P-202, P-391, P-392
• Integral 4-way valve on P-842 for operation of double-
acting cylinders
• Handle lock and lightweight construction for easy carrying High Temperature and
Corrosion Resistant Hand
• Large oil capacities to power a wide range of cylinders Pumps
or tools The P-142 and P-392 hand
• Non-conductive fiberglass handle for operator safety pumps are available with
Viton seals, stainless steel pistons and
• Internal pressure relief valve for overload protection anodized aluminium reservoir for use in
extreme environments.
Cylinder-pump set SCR-254H used to support
the construction while monitoring pressure and Page: 62
load with the gauge.
Pump Usable Oil Model Pressure Rating** Oil Displacement Max.
Type Capacity Number per Stroke Handle
Effort
(bar) (cm3)
(cm )
3 st
1 stage nd
2 stage st
1 stage 2nd stage (kg)
Single- 327 P-141 - 700 - 0,90 32,7
Speed 901 P-391 - 700 - 2,47 38,6
327 P-142* 13 700 3,62 0,90 35,4
901 P-202 13 700 3,62 0,90 28,6
Two-
Speed 901 P-392* 13 700 11,26 2,47 42,2
2540 P-802 27 700 39,33 2,47 43,1
2540 P-842 27 700 39,33 2,47 43,1
* Available as set, see note on next page.
** Contact Enerpac for applications where operating pressure is less than 10% of
68 pressure rating.
Pump and Cylinder sets P

All Pumps marked Series
as sets (pump, cylinder, gauge,
*
couplers and hose) for your
Page: 64
H Reservoir Capacity:
Release valve J 38˚ - P-141, P-142, P-202 327- 2540 cm3

50˚ - P-391, P-392
Flow at Rated Pressure:
M 0,90 - 2,47 cm3/stroke

G L Operating Pressure:
S
700 bar
E
P D A C
N B Hoses
P-141, P-142, P-202, P-391, P-392 Enerpac offers a complete
H line of high quality hydraulic
J hoses. To ensure the
Release Valve integrity of your system,
50˚
specify only genuine Enerpac
hydraulic hoses.
Page: 120
G L
S Gauges
E Minimize the risk of over-
Q loading and ensure long,
P D A C dependable service from
N B your equipment. Refer to the
P-802 System Components section for
H a full range of gauges.
J Page: 119
Valve Control 50˚
Foot Pump P-392FP
G For handsfree operation the
L lightweight and robust
Q
P-392FP Foot Pump is the
S
perfect choice.
P D A C
E
N B
P-842
Page: 75
Piston Dimensions (mm) Model

Stroke Number
(mm) A B C D E G H J L M N P Q S (kg)
12,7 185 336 28 85 28 / "-18 NPTF
1 4 319 19 143 – 95 80 – 7 2,4 P-141
25,4 344 533 36 99 33 3
/8"-18 NPTF 522 30 177 16 120 – – – 4,1 P-391
12,7 185 336 28 85 28 1/4"
-18 NPTF 319 19 143 – 95 80 – 7 2,4 P-142*
12,7 344 509 36 85 28 1/ "
4 -18 NPTF 400 19 144 16 95 – – – 3,4 P-202
25,4 344 533 36 99 33 3/ "
8 -18 NPTF 522 30 177 16 120 – – – 4,1 P-392*
25,4 337 552 45 133 35 3/8"
-18 NPTF 527 55 228 – 181 120 35 10 8,2 P-802
25,4 337 552 45 133 20 3/ "
8 -18 NPTF 527 55 228 – 181 120 36 10 10,0 P-842
www.enerpac.com 69
P-Series, Steel Hand Pumps Hydraulic Technology Worldwide
Shown from top to bottom: P-462, P-84, P-801, P-77, P-80, P-39
The Solution for

Tough Jobs
Two Speed
Recommended for applications
where cylinder plunger must
advance rapidly to load contact, and
applications where greater oil capacities
are required, such as multiple cylinder
hook-ups.
Foot Pump
Conversion Kits
Convert your P-39 to foot
power with the PC-10 Kit.
Includes instructions for easy
conversion.
• Two-speed operation for reduced operator fatigue
(except P-39)
• 4-way valving on the P-84 and P-464 for operation of Gauges
double-acting cylinders Minimize the risk of over-
loading and ensure long,
• External load release valve on remaining models for
single-acting cylinder operation your equipment. Refer to the
• Internal pressure relief valve for overload protection System Components section for
a full range of gauges.
• Large oil capacity to power a wide range of cylinders Page: 119
or tools
4-Way Control Valve
P-84 and P-464 feature a
manual 4-way control valve,
designed for use with one
In the absence of a power supply, the P-80 Hand double-acting or two single-
Pump offers a powerful solution. acting cylinders. For system
Set-up information:
Page: 112
Pump Usable Oil Model Pressure Rating** Oil Displacement Max.

Type Capacity Number per Stroke Handle
Effort
(bar) (cm3)
(cm )
3
1st stage nd
2 stage st
1 stage 2nd stage (kg)
Single 655 P-39 - 700 - 2,62 50
770 P-77 14 700 16,00 2,41 43
2200 P-80* 25 700 16,22 2,46 47
Two- 4080 P-801 25 700 16,22 2,46 47
Speed 2200 P-84 25 700 16,22 2,46 47
7423 P-462 14 700 126,20 4,75 49
7423 P-464 14 700 126,20 4,75 49
* Available as a set, see note on next page.
** Contact Enerpac for applications where operating pressure is less than 10% of
70 pressure rating.
Steel Hand Pumps
High Temperature and
Corrosion Resistant Hand P
Pumps Series
Some hand pumps are
available with Viton seals,
stainless steel pistons and anodized
aluminium reservoir for use in extreme
environments.
Page: 62
Reservoir Capacity:
J
H 655-7423 cm3
3/8"-18NPTF 40˚ P-39
42° P-77 Flow at Rated Pressure:
2,46-4,75 cm3/stroke
L
E Maximum Operating Pressure:
N
D A
B
C
M
700 bar
P-39, P-77
P-84 only H
J
T 3/8"- 50˚
18NPTF Pump and Cylinder sets
P-80 is also
L available as set
(pump, cylinder, gauge,
E
couplers and hose) for your ordering
Q R S convenience.
P D A C Page: 64
N F B M
P-80, P-801, P-84 Speed Chart

H pump will operate your cylinder,
3/8"- J see the Pump-Cylinder Speed Chart in
18NPTF 74˚ the ‘Yellow Pages’.
Page: 117
R Q L Cylinder Matching Chart

E M
hand pump for your application,
A C S please refer to the Cylinder Matching
B D Chart located in the ‘Yellow Pages’.
N P
Page: 110
P-462, P-464

Stroke Number
(mm) A B C D E F H J L M N P Q R S T (kg)
20,6 393 520 33 38 32 – 464 30 119 65 133 – – – – – 5,9 P-39
25,4 418 525 33 40 52 – 560 34 115 50 120 – – – – – 6,8 P-77
25,4 425 539 25 44 54 – 527 29 174 19 146 121 – 21 8 67 10,9 P-80*
25,4 659 782 25 44 54 – 772 29 174 – 146 121 – 21 8 67 14,1 P-801
25,4 425 539 25 44 – 64 527 29 174 19 146 121 38 43 8 67 13,2 P-84
38,1 210 308 163 320 195 – 671 25 270 175 650 92 – – 80 – 27,7 P-462
38,1 210 308 163 320 195 – 671 25 270 175 650 92 89 68 80 – 27,7 P-464
www.enerpac.com 71
P-Series, Low Pressure Hand Pumps Hydraulic Technology Worldwide
Shown from left to right: P-51, P-25, P-18
Gauges
Minimize the risk of over-
System Components section for a full
range of gauges.
Page: 119
• Bi-directional pumping on the P-25 and P-50 allows Foot Pump Conversion Kits
operation on both handle strokes Convert your P-18 to foot
• External load-release valve power with the PC-10 Kit.
Includes instructions for easy
• Internal pressure-relief valve for overload protection
conversion.
• P-51 can be operated in horizontal and vertical position
with pump head and oil outlet facing downwards
• P-50 and P-51 pump oil in both forward and reverse handle
movement improving overall efficiency, ideal when Foot Pump P-392FP
mounting space is restricted For handsfree operation the
lightweight and robust
P-392FP Foot Pump is the
perfect choice.
Page: 75
t P-18 hand pump used for locking the rotating table for
marble polishing.
Pump Usable Model Pressure Oil Max.

Type Oil Number Rating Displacement Handle
Capacity (bar) per Stroke Effort
(cm3)
(cm3) (kg)
295 P-18 200 2,62 26
Single- 3277 P-25 175 9,50 27
Speed 3277 P-50 350 4,75 27
819 P-51 200 4,10 27
72
Low Pressure Hand Pumps
P
Series
H
J
3/8"-18NPTF Reservoir Capacity:
40˚
295-3277 cm3
L
E 2,62-9,50 cm3/stroke
D A C Operating Pressure:
N B M
175-350 bar
P-18
34˚ Hoses
90˚ 1/4"-
specify only genuine Enerpac hydraulic
18NPTF
L hoses.
Page: 120
M
S
A C Corrosion resistant hand
B D pumps for low pressure
filling and high pressure
P-25, P-50 testing applications, suitable
for a wide range of fluids.
H Page: 74
J
42˚
3/8"-18NPTF
180˚ 1/4"-18NPTF
L
M
S
E
A C P-25 hand pumps used
B D with RC-serie cylinders to
P-51 keep wooden layers under
pressure during
lamination of plates.

Stroke Number
(mm) A B C D E H J L M N S (kg)
20,6 210 327 33 38 48 216 30 111 13 133 – 5,0 P-18
38,1 152 173 152 240 – – – 684 200 – 10 16,3 P-25
38,1 152 173 152 240 – – – 684 200 – 10 16,8 P-50
25,4 52 92 181 200 57 610 29 160 129 – 9 5,4 P-51
www.enerpac.com 73
MP-Series, Multifluid Hand Pumps Hydraulic Technology Worldwide
Shown: MP-110
MP-Series Multifluid Pumps

Typical Applications
• Filling and testing of aircraft systems

such as shock absorbers
• Testing of aircraft systems using
Skydrol fluid
• Testing of pressure vessels
• Operation of single-acting hydraulic
tools and cylinders.
Gauges
Minimize the risk of over-
your equipment.
Page: 119
Optional Reservoir Kit

The 10 litres reservoir kit
• Unbeatable corrosion resistance MP-10T includes tank with
skid frame, top plate with reservoir seal,
• Standard supplied with Nitrile seals – can be used for a
suction pipe and mounting bolts.
wide range of fluids such as demineralised water, oil/water Useable oil capacity is 7,4 litres.
emulsions, waterglycols, mineral oils
• Two speed pumps up to 1000 bar pressure
• Buna Nitrile seals can be exchanged with optional EPDM 3 ø50
topview
seal for use with Skydrol or brake fluids
• Impregnated aluminium anodized pump housing with
20
174
71
95
stainless steel internal pumping components
2
• Externally adjustable pressure relief valve
34
• 1/4” NPTF gauge port. 675 15 15
24
118
95
69
180 ø25
t MP-Series pumps are ideal for 9,5 1 20
testing and filling applications. 84
116
175
28 119
308
190
320 283 MP-110, 350, 700, 1000
Suction / Tank return port 3/8”-18 NPTF
650
Pressure port 3/8”-18 NPTF
MP-110T Gauge port 1/4”-18 NPTF
Pump Usable Model Pressure Oil Displacement Max. Piston

Type Oil Number Rating per Stroke Handle Stroke
1st 2nd 1st 2nd
(cm3) stage stage stage stage (kg) (mm) (kg)
* MP-110 35 110 52,60 21,80 45 26,5 6,6
Two * MP-350 35 350 52,60 7,80 45 26,5 6,6
Speed * MP-700 35 700 52,60 3,10 45 26,5 6,6
* MP-1000 35 1000 52,60 2,20 45 26,5 6,6
Note: MP-Pump includes 1,5 mm thick gasket for reservoir mounting.
MP-Series pumps requires the use of an external reservoir.
74
Lightweight Hydraulic Foot Pump
Shown: P-392FP
P
Series
Reservoir Capacity:
492 cm3
2,47 cm3/stroke
700 bar
Pump and Cylinder sets

The P-392FP is
available as sets
(pump, cylinder, gauge,
couplers and hose) for your ordering
convenience.
• Robust, durable and compact
- Steel frame for maximum stability Page: 64
- Steel pumping handle
- Aluminium reservoir Hoses
• Foot pedal lock and lightweight construction for easy Enerpac offers a complete
carrying line of high quality hydraulic
• Two-speed operation reduces foot pedal strokes as much hoses. To ensure the
as 78% over one-speed pumps integrity of your system,
specify only genuine Enerpac hydraulic
• Controllable load return circuit for improved control under hoses.
load and faster no-load retraction of spring or gravity
return single-acting cylinders Page: 120
• Large release valve foot pad for easy control for slowly
metering loads down
• Internal pressure relief valve for overload protection.
t The great advantage of the P-392FP – easily
operated by foot, making your hands free to
504 handle the tool or cylinder.
Release
valve 30
3/8"-
433
18NPTF
187
52
193 600
Usable Model Pressure Oil Displacement Max. Piston

Oil Number Rating per Stroke Handle Stroke
1st 2nd 1st 2nd
(cm3) stage stage stage stage (kg) (mm) (kg)
492 P-392FP * 15 700 11,26 2,47 42 25,4 7,0
www.enerpac.com 75
P, 11-Series, Ultra-High Pressure Hand Pumps Hydraulic Technology Worldwide
Shown from left to right: 11-100, P-2282
Ultra-High Pressure
up to 2800 bar
2-Way Shut-Off Valve 72-750

For 2800 bar applications
requiring a shut-off valve or
gauge snubber. Made of
318 Stainless Steel and
utilizing .38 inch cone fittings, it is the
perfect selection for use with your Ultra-
High Pressure hand pump.
Test System Gauges

Ideal for monitoring pressure
in your hydraulic circuit, Test
System Gauges, such as the
T6010L, are available with
• Two-speed operation on the P-2282 allows for faster fill cone threads or NPT threads and a
operation, reducing cycle times for many testing variety of pressure ranges.
applications
Page: 130
• 303 Stainless steel construction on the 11-100 and
11-400 models enable use with many different fluids, such
as distilled water, diesters, silicones, soluble oils and T-6010L
petroleum 45-116
• Large release knob for improved control of pressure
release To system
83-011 43-701 P-2282
• Outlet ports are 3/4"-16 cone for 2800 bar rating
• 3/8" NPTF adaptor (partnr. C898.166) included with P-2282, Typical Test System
for applications under 700 bar
T-6010L
83-011 43-300 45-116
43-001 72-750 43-701 P-2282
To system
Cone Seal
Stainless
Stainless Steel High Steel Tubing Test System with Gauge Snubber
Pressure fittings Sleeve
seal on a ‘cone’ Body
surface and do not
require pipe sealer. Pump Usable Oil Model Pressure Oil Displacement Max.
The Gland Nut Type Capacity Number Rating* per Stroke Handle
holds the sleeve (bar) (cm3) Effort
and tubing tight 1st 2nd 1st 2nd
against the cone (cm3) stage stage stage stage (kg)
surface to provide a Two-Speed 983 P-2282 13 2800 16,22 0,61 48,1
Bleed Hole
2800 bar seal.
Gland Nut 737 11-100 - 700 - 2,49 54,4
Single-Speed
737 11-400 - 2800 - 0,62 54,4
* Contact Enerpac for applications where operating pressure is less than
10% of pressure rating.
76
Ultra-High Pressure Hand Pumps
Optional Ultra-High Pressure Fittings and Tubings
Description Connection Model Nr. P/11
2800 bar Series
Gland .38" cone 43-001
Nut Plug
Elbow .38" cone 43-200
Reservoir Capacity:
Tee .38" cone 43-300
737- 983 cm3
Gauge .38" cone side/ 43-301 0,61- 2,49 cm3/stroke

Tee .25" cone gauge port
Operating Pressure:
700 -2800 bar
Gauge .38" cone side/ 83-011
Adaptor .25" cone gauge port
Coupling .38" cone 43-400
Optional gauge
Cross .38" cone 43-600
1/4"-
20UNC H
J
Gland .38" cone 43-701 35˚

Nut N
with 3/4"- M
Sleeve 16UNF
L
S
Tubing 100 mm tube, O.D. .38" * 45-116 E
200 mm tube, O.D. .38" * 45-126 C A T
300 mm tube, O.D. .38" * 45-136 D B
700 bar only 11-100, 11-400
Adaptor .38F cone to 1/4" M NPTF 41-146
H
.38F cone to 3/8" M NPTF 41-166 3/4"-16UNF J M
40˚
Adaptor .38F cone to 1/4" F NPTF 41-246
.38F cone to 3/8" F NPTF 41-266 L
E
Note: .25" cone fittings use 9/16"-18 threads, 3/8" cone fittings use
3
/4"-16 threads. N F A C
Release Valve B
* Actual tubing lengths are 19 mm less than nominal size shown.
These dimensions make distance between centers of valves and P-2282
fittings multiples of 100 mm spaces.

Stroke Number
(mm) A B C D E F H J L M N S T (kg)
25,4 344 558 35 – 31 133 527 29 228 7 120 – – 6,4 P-2282
19,8 240 266 151 177 45 – 635 162 114 237 314 7 9 10,0 11-100
19,8 240 266 151 177 45 – 635 162 114 237 314 7 9 10,0 11-400
www.enerpac.com 77
PU-Series, Economy Electric Pumps Hydraulic Technology Worldwide
Shown: PUD-1300E
Heavy on Performance,
Light on Weight
Gauges
your equipment. For use with
the Economy pump the following gauges
are suggested:
For Pump Gauge Gauge

Model Number Model Adaptor
Number Model Nr.
PUD-1100E, 1101E G-2536L GA-3
PUJ-1200E, 1201E G-2536L –
PUD-1300E, 1301E G-2535L GA-3
PUJ-1400E, 1401E G-2536L GA-3
For a full range of gauges, please refer to
the System Components section.
Page: 119
• Lightweight and compact design : 11,8 to 18,6 kg

• Large easy-carry handle for maximum portability Hoses
• Two-speed operation reduces cycle times for improved line of high quality hydraulic
productivity hoses. To ensure the
• 230 VAC 50/60-cycle universal motor will operate on integrity of your system,
voltages as low as 115 volts specify only genuine Enerpac
hydraulic hoses.
• 24 VDC remote motor control, 3 m length for operator Page: 120
safety
• Starts under full load Speed Chart
• High strength molded shroud, with integral handle, pump will operate your cylinder,
protects motor from contamination and damage see the Pump-Cylinder Speed Chart
in the ‘Yellow Pages’.
An Economy pump PUJ-1200E is used with an RC-2514
to reposition a stamping die to simplify maintenance. Page: 117
Pump Usable Oil Model Pressure

Type Capacity Number* Rating
(bar)
(Used with
cylinder) (litres) 1st stage 2nd stage
1,9 PUD-1100E 13 700
3,8 PUD-1101E 13 700
Single- 1,9 PUJ-1200E 13 700
Acting 3,8 PUJ-1201E 13 700
1,9 PUD-1300E 13 700
3,8 PUD-1301E 13 700
Double- 1,9 PUJ-1400E 13 700
Acting 3,8 PUJ-1401E 13 700
* For 115 volt applications replace ’E’ suffix with ’B’.
** Electric dump valve for auto-retract of cylinders.
78
Economy Electric Pumps
About the Economy Pump
The Economy pump is best
PUD-1300 Series
• Provides advance-hold-retract of PU
suited to power small to single-acting cylinders Series
medium size cylinders or hydraulic • Ideal for punching applications
tools. Its lightweight and compact • For applications requiring remote
design make it ideal for applications valve operations
which require easy transport of the • 3 m pendant controls motor and
pump. The universal motor works valve operation.
well on long extension cords or
generator-driven electrical power PUJ Series Reservoir Capacity:
supplies. • Available with 3- and 4-way
valves for single or double-acting 1,9 - 3,8 litres
For further application assistance cylinders
refer to the ‘Yellow Pages’. • 3 m pendant controls the motor
operation 0,32 l/min
PUD-1100 Series • Manual valves provide advance-
hold-retract tool operation. Motor Size:
• Provides advance-retract of
single-acting cylinders 0,37 kW
• Ideal for punching applications
• For applications not requiring load Maximum Operating Pressure:
holding
• 3 m pendant controls motor and
700 bar
valve operation.
Page: 107
Gauge Port
(PUJ-1200/1201 only) FLOW CHART
1/4"-18NPTF
3,5
Oil Flow (l/min)
Outlet Port
3/8"-18NPTF 3,0
Tankport 2,5
3/8"-18NPTF 2,0
C
1,5
1,0
0,5
D E
0
0 100 200 300 400 500 600 700
ø 10 Pressure (bar)
F J
A B Economy PU-Series
Output Flow Valve Valve Current Motor Sound Dimensions (mm) Model
Rate Type Function Draw Voltage Level Number*
(I/min)
1st 2nd
stage stage (Amps) (VAC) (dBA) A B C D E F J (kg)
3,31 0,32 3,2 230 85 244 244 362 101 119 203 133 11,8 PUD-1100E
Dump** Advance/Retract
3,31 0,32 3,2 230 85 368 309 373 105 130 323 142 17,2 PUD-1101E
3,31 0,32 3-way, 3,2 230 85 244 244 362 101 119 203 133 10,0 PUJ-1200E
Adv/Hold/Retr.
3,31 0,32 2-pos. 3,2 230 85 368 309 373 105 130 323 142 15,4 PUJ-1201E
3,31 0,32 Solenoid 3,2 230 85 244 244 362 101 119 203 133 12,0 PUD-1300E
Adv/Hold/Retr.
3,31 0,32 3/2 3,2 230 85 368 309 373 105 130 323 142 17,5 PUD-1301E
3,31 0,32 4-way, 3,2 230 85 244 244 362 101 119 203 133 13,2 PUJ-1400E
Adv/Hold/Retr.
3,31 0,32 3-pos 3,2 230 85 368 309 373 105 130 323 142 18,6 PUJ-1401E
www.enerpac.com 79
PE-Series, Submerged Electric Pumps Hydraulic Technology Worldwide
Shown: PEJ-1401E
Best Performance
on Mid-Range
Cylinders and Tools
SELECTION CHART
For more technical information see next
page.
5 BASIC PUMP TYPES

Select the model that suits your
application. For special requirements see
page 83 or contact your Enerpac office.
• Two-speed operation reduces cycle times for improved PED Series: with Dump Valve
productivity • Ideal for punching, crimping and cutting
• For use when load holding is not
• Powerful 0,37 kW induction motor is submerged in the oil required
reservoir to run cooler, protect the motor, simplify the • Control pendant with 3 m cord controls
pump interface, save space and reduce noise valve and motor
• Large 5,5 litres reservoir allows operation of a wide range PEM Series: with Manual Valve
of cylinders
• Ideal choice for most applications
• 24 VDC remote pendant control on certain models for • Manual valve control, for both single-
safer operation acting and double-acting applications
• Externally adjustable relief valve allows control of • Manual motor control
operating pressure without opening the pump
• 40-micron internal return line filter keeps oil clean, PER Series: with Solenoid Valve
promoting longer pump life • Ideal for production and lifting
• Full length side tube for easy monitoring of oil level • All valves are 3 position for
Advance-Hold-Retract
• Control pendant with 3 m cord
The Remote Jog Model of the for remote valve operation
Submerged Pump simplifies
repair on this construction PEJ Series: with Remote Jog
crane. • For light production and lifting
applications
• Manual valve control for single-acting or
double-acting cylinders
• Control pendant with 3 m cord
for remote motor operation
PES Series: with Pressure Switch
• Designed for continuous pressure
applications, such as clamping,
workholding and testing
• All versions include manual valves for
directional control
* See the Valve Section in this catalog for

technical information on valve types.
80
Submerged Electric Pumps
Submerged Pump
Application Its lightweight and compact design PE
The Submerged pump is also make it ideal for applications Series
best suited to power small to which require some transport of the
medium size cylinders or hydraulic pump.
tools, or whenever quiet,
intermittent duty cycle is needed. For further application assistance
With its low sound level and the see the ‘Yellow Pages’ or contact
addition of the optional oil cooler, your local Enerpac office.
the Submerged pump is suited to Reservoir Capacity:
light production work as well.
Page: 110 5,5 litres
0,27 l/min
Motor Size:
0,37 kW
700 bar
Pump Type Used with Valve Function Valve Type* Usable Oil Model Number
Cylinder Capacity 230 VAC, 1 ph
(litres) (kg)
Single-Acting Advance/Retract Dump 5,5 PED-1001E 24,9
Single-Acting Advance/Retract Manual, 3-way, 2-position 5,5 PEM-1201E 24,0

Single-Acting Advance/Hold/Retract Manual, 3-way, 3-position 5,5 PEM-1301E 24,0
Double-Acting Advance/Hold/Retract Manual, 4-way, 3-position 5,5 PEM-1401E 24,0
Single-Acting Advance/Hold/Retract Solenoid, 3-way, 3-position 5,5 PER-1301E 29,5

Double-Acting Advance/Hold/Retract Solenoid, 4-way, 3-position 5,5 PER-1401E 29,5
Single-Acting Advance/Retract Manual, 3-way, 2-position 5,5 PEJ-1201E 24,9

Single-Acting Advance/Hold/Retract Manual, 3-way, 3-position 5,5 PEJ-1301E 24,9
Double-Acting Advance/Hold/Retract Manual, 4-way, 3-position 5,5 PEJ-1401E 24,9
Single-Acting Advance/Retract Manual, 3-way, 2-position 5,5 PES-1201E 28,1

Double-Acting Advance/Hold/Retract Manual, 4-way, 3-position 5,5 PES-1401E 28,1
www.enerpac.com 81
PE-Series, Submerged Electric Pumps Hydraulic Technology Worldwide

SUBMERGED PUMP PERFORMANCE FLOW CHART
Motor Pressure Output Flow Rate Motor Electrical Sound Relief Valve
Size Rating Specifications* Level Adjustment
at 50 Hz
Oil Flow (l/min)

Range
(bar) (l/min)
2,0
(kW) 1st stage 2nd stage 1st stage 2nd stage (Amps @ Volts-Ph-Hz) (dBA) (bar)
13 @ 115-1-50/60 1,5
0,37 70 700 2,0 0,27 62-70 70-700
6,75 @ 230-1-50/60
*At full load. See ordering matrix footnote for frequency notations. 1,0
0,5
38 56
0
0 100 200 300 400 500 600 700
3/8"- Pressure (bar)
18NPTF
Submerged PE-Series
406
284
239
185 179 Speed Chart
25
98 To determine how a specific
50 pump will operate your cylinder,
ø4 see the Pump-Cylinder Speed Chart
126 213 101 182 91 in the ‘Yellow Pages’.
227 196
Page: 117
Heat Exchanger (optional for all models)
Fill Port
Pressure Switch (PES-series, optional for other models)
Oil Level Indicator
This PED-1001E Submerged

pump quickly and quietly powers
a hydraulic nut cutter in this
bucket maintenance application.
82
Submerged Electric Pumps
CUSTOM BUILD YOUR SUBMERGED PUMP
If the Submerged Pump that would best fit your application cannot be found PE
in the chart on page 81, here you can easily build your custom submerged Series
pump.
This is how a Submerged Pump Model Number is built up:
P E M - 1 3 01 E Reservoir Capacity:
1 2 3 4 5 6 7
5,5 litres
Product Motor Pump Pump Valve Reservoir Motor
Type Type Type Series Type Size Voltage
0,27 l/min
Motor Size:
1 Product Type 5 Valve Type 0,37 kW
P = Pump 0 = Dump
2 = 3-way, 2-position, normally open Maximum Operating Pressure:
2 Motor Type
E = Electric Motor
3 = 3-way, 3-position, tandem center
4 = 4-way, 3-position, tandem center
700 bar
3 Pump Type 6 Reservoir Capacity
D = Dump 01 = 5,5 litres
J = Jog
M = Manual 7 Motor Voltage and Heat Exchanger
R = Remote (Solenoid) B = 115 V, 1 Ph, 50/60 Hz 1)
S = Pressure Switch D = 115 V, 1 Ph, 50/60 Hz 1)
with Heat Exchanger
4 Pump Series E = 230 V, 1 Ph, 50/60 Hz 2)
1 = 0,37 kW, 700 bar F = 230 V, 1 Ph, 50/60 Hz 2)
with Heat Exchanger Hoses
1)
Solenoid valves operate only at 60 Hz. line of high quality hydraulic
Can run on 50 Hz with manual valves. hoses. To ensure the
2)
Solenoid valves operate only at 50 Hz.
specify only genuine Enerpac
Can run on 60 Hz with manual valves.
hydraulic hoses.
Page: 120
Ordering Example
Gauges
Model Number: PER-1301E Minimize the risk of over-
The PER-1301E is a 0,37 kW, loading and ensure long,
700 bar, submerged electric dependable service from
pump, with 5,5 litres usable oil your equipment. Refer to the
capacity, a 3-way, 3-position, System Components section for
solenoid remote valve and a a full range of gauges.
Page: 119
230 V, 1 Phase, 50/60 Hz
motor.
www.enerpac.com 83
Z-Class, Innovation in Pump Design Hydraulic Technology Worldwide
By reducing the number of moving parts,

improving flow dynamics and decreasing
friction, Z-Class pumps will stay on the job
longer, require less energy to operate and
when needed, have lower service costs.
Z-Class pump element – the heart of your

hydraulic system
Highly efficient design provides increased flow rates,
reduced heat generation and a decrease in power
consumption. This means improved tool speed and increased
service life – which results in higher productivity and lower
operating costs.
ZU4-Electric Pump
• For manual valve operation
Heavy-duty bearings extend pump life by reducing friction,
• User adjustable relief valve on all valves
reducing surface-loading and lowering bearing stresses.
• Oil flow 1,0 l/min at 700 bar
Pump cavity oil bath extends pump life by reducing heat,
• Skid Bar option (see page 88-89)
improving lubrication and reducing wear.
• Oil level sight glass or indicators
Self-priming, high-flow 1st stage pump increases pump
• Single phase electric motors include motor on/off
performance by super-charging the 2nd stage piston pump –
switch and overload protection
improving oil flow in both hot and cold weather operation.
Balanced rotating components reduce vibration creating a
smoother running pump – reducing wear, friction and sound
ZU4-Electric Pump with LCD
• All the features of standard electric pump
levels.
• For manual and solenoid valve operation
Replaceable piston check-valves increase service life of
• Back-lit LCD provides essential user information:
major pump components.
– Pump usage information, hour and cycle counts
Ergonomic and durable low-voltage pendant features
– Low-voltage warning and recording
sealed switches and operates on 15 Volts.
– Self-test, diagnostic and read-out capabilities
– Pressure read-out and auto-mode pressure
settings (when used with optional pressure
transducer)
• All options available (see page 88-89)
ZU4-Series Pump Applications
• Portable: when frequent pump transport is
required and/or on remote locations
• Universal motor: 1-phase, runs well under poor voltage Two-stage
supply, using generator power supply or using long 11,5
Oil Flow (l/min)
extension cord
• Duty-cycle: for intermittent applications
9,8 ZU4
8,2
• Cylinders & tools: for medium to large size single- and
6,4
double-acting applications and high speed.
4,9
Page: 86 2,3
1,6
0
ZE-Series Pump Applications 0 70 140 280 420 560 700
Pressure (bar)
• Stationary: when pump remains on one location
• Induction motor: 1 and 3-phase for high cycle ZU4-SERIES PERFORMANCE CHART
usage Pump Output Flow Rate (l/min) Available Motor Sound
• Duty-cycle: for heavy-duty, extended cycle applications Series Reservoir Size Level
• Cylinders & tools: for medium to large size single- and low pressure high pressure
Sizes
double-acting applications and high speed. at at at at (useable oil)
7 50 350 700
bar bar bar bar (litres) (kW) (dBA)
Page: 90 ZU4 * 11,5 8,8 1,2 1,0 4-8-10-20-40 1,25 85-90
* Two stage pump unit. Relief valve adjustment range 140-700 bar.
84 www.enerpac.com
ZU4 & ZE-Series, Pump Types and Specifications
ZE-Electric Pump ZE-Electric Pump with LCD-Electric Box

• For manual valve operation • For solenoid or manual valve operation
• User adjustable relief valve on all valves • User adjustable relief valve on all valves
• Oil flows from 0,55 to 2,73 l/min at 700 bar • Oil flows from 0,55 to 2,73 l/min at 700 bar
• All non-electric options available (see page 92-93) • All options available (see page 92-93)
• Oil level sight glass or indicators • Back-lit LCD provides essential user information:
• Single phase electric motors include motor on/off – Pump usage information, hour and cycle counts
switch and overload protection – Low-voltage warning and recording
• Carrying handles on all models. – Self-test, diagnostic and read-out capabilities
– Pressure read-out and auto-mode pressure
settings (when used with optional pressure
transducer)
• All single and three phase units include motor
control and overload protection.
Two-stage Single-stage
14 14 14 14
Oil Flow (l/min)
Oil Flow (l/min)
Oil Flow (l/min)
Oil Flow (l/min)
12 ZE3 12 ZE4 12 ZE5 12 ZE6

10 10 10 10
8 8 8 8
6 6 6 6
4 4 4 4
2 2 2 2
0 0 0 0
0 140 280 420 560 700 0 140 280 420 560 700 0 140 280 420 560 700 0 140 280 420 560 700
Pressure (bar) Pressure (bar) Pressure (bar) Pressure (bar)
ZE-SERIES PERFORMANCE CHART

Pump Output Flow Rate at 50 Hz * Pump Unit Available Motor Relief Sound Single or Two-
Series (l/min) Reservoir Sizes Size Valve Level
(useable oil) Adjust-
Stage
low pressure high pressure ment Choose single-stage
Range pumps for applications that
at at at at
7 bar 50 bar 350 bar 700 bar (litres) (kW) (bar) (dBA) require constant flow
0,59 0,59 0,57 0,55 Single-stage regardless of pressure such
ZE3 4-8-10-20-40 0,75 70-700 75 as testing or clamping.
6,15 5,26 0,57 0,55 Two-stage
Two-stage pumps have an
0,87 0,87 0,84 0,82 Single-stage increased output flow at low
ZE4 4-8-10-20-40 1,12 70-700 75
8,88 8,20 0,84 0,82 Two-stage pressure to allow fast
1,75 1,72 1,68 1,64 Single-stage movement towards the load,
ZE5 10-20-40 2,24 70-700 75 for reduced cycle times and
11,61 11,27 1,68 1,64 Two-stage
increased productivity.
3,00 2,94 2,86 2,73 Single-stage
ZE6 10-20-40 5,60 70-700 80
12,29 12,15 2,86 2,73 Two-stage
* Oil flow will be approximately 6/5 of these values at 60 Hz.
www.enerpac.com 85
ZU4-Series, 700 Bar Electric Pumps Hydraulic Technology Worldwide
Shown from left to right: ZU4108DE-T, ZU4420SE-H, ZU4304ME-K
Tough, Dependable and

Innovative
ZU4-Series Features and

Options
For special requirements see
factory installed features and
options.
Page: 88
COMMON PUMP MODELS

For technical information and other
options see next page.
• High-efficiency two-speed pump design – higher oil flow and
bypass pressure, cooler running and requires 18% less BASIC PUMP TYPES
current draw than comparable pumps Select the model that suits your application.
For special requirements contact your
• Powerful 1,25 kW universal electric motor provides high Enerpac office.
power-to-weight ratio and excellent low-voltage operating
characteristics Dump Valve *)
• Ideal for punching, crimping and
• High-strength, moulded composite shroud protects motor cutting.
and electronics, while providing an ergonomic, non- • For use when load-holding is not
conductive handle for easy transport required.
• Durable steel reservoirs
• LCD provides self test, diagnostic and read-out capabilities Manual Valve
never before offered on a portable electric pump • Ideal choice for most applications.
• Designed to last and easy to service • Manual valve control, for single-acting
or double-acting applications.
• Motor control on shroud.
Solenoid Valve *)
• Ideal for lifting applications and where
remote control is required.
• Motor runs continuously on pumps with
VE33 and VE43 valves. With VE32 valve,
motor only runs during the advance
function, while holding and retracting, the
motor is off.
Manual Valve with Pendant *)

Designed to be tough, the • For light production, lifting and post
ZU4-Series with steel reservoirs tensioning applications.
will take the abuse of today’s • Manual valve for single- or double-
construction sites.The acting cylinders.
ZU4908JE is the ideal pump for
• Manual valve with power seat
post tensioning applications.
For post tensioning tools see (VM43LPS), ideal for post-tensioning
page 182. applications.
* Low-voltage control pendant with 3m. cord
controls valve and motor.
86 www.enerpac.com
ZU4-Series, Electric Pumps
ZU4-Series Pump
Applications
Its lightweight and compact design
make it ideal for applications which ZU4
require easy transport of the pump. Series
The ZU4-Series pump is best It utilises a universal motor which
suited to power medium to large will work well on long extension
size cylinders or hydraulic tools, or cords or generator driven electrical
wherever high speed, intermittent power supplies.
duty cycle is needed.
For further application assistance
Patent-pending Z-Class contact your local Enerpac office. Reservoir Capacity:
technology provides high by-pass
pressures for increased 4 - 40 litres
productivity, specifically in
applications using long hose runs
and high-pressure drop circuits like 1,0 l/min
heavy lifting or certain double-
acting cylinders and tools. Motor Size:
1)
1,25 kW
700 bar
Pump Type For use with Valve Function 2) Valve Pump Usable Model Number 1)
cylinder Type 2) Control Oil 230 V / 1 phase 3)
Capacity
STD (Standard) LCD 4)
(litres) Electric Electric (kg)

Single-Acting Advance/Retract VE32D Remote 4 – ZU4104DE 28,5
Single-Acting Advance/Retract VE32D Remote 8 – ZU4108DE 33,1
– –
– –
– –
– –
Single-Acting Advance/Retract VM32 Manual 4 ZU4204ME ZU4204LE 26,1
Single-Acting Advance/Retract VM32 Manual 8 ZU4208ME ZU4208LE 31,3
Single-Acting Advance/Hold/Retract VM33 Manual 4 ZU4304ME ZU4304LE 28,5
Single-Acting Advance/Hold/Retract VM33 Manual 8 ZU4308ME ZU4308LE 31,7
Double-Acting Advance/Hold/Retract VM43 Manual 4 ZU4404ME ZU4404LE 27,2
Double-Acting Advance/Hold/Retract VM43 Manual 8 ZU4408ME ZU4408LE 31,7
Single-Acting Advance/Hold/Retract VE32 Remote 4 – ZU4204SE 28,5
Double-Acting Advance/Hold/Retract VE43 Remote 8 – ZU4408SE 38,5
– –
– –
– –
– –
Single-Acting Advance/Retract VM32 Remote (Man.) 4 ZU4204JE ZU4204KE 27,2
Single-Acting Advance/Retract VM32 Remote (Man.) 8 ZU4208JE ZU4208KE 31,7
Single-Acting Advance/Hold/Retract VM33 Remote (Man.) 8 ZU4308JE ZU4308KE 32,2
Double-Acting Advance/Hold/Retract VM43 Remote (Man.) 8 ZU4408JE ZU4408KE 32,2
– –
Double-Acting Advance/Hold/Retract VM43LPS Remote (Man.) 8 ZU4908JE ZU4908KE-T 34,5
1)
All models meet CE safety requirements. “E” voltage versions also meet all requirements of the European EMC-Directive.
2)
See pages 133-137 for hydraulic symbol of these valves.
3)
See custom ordering matrix on page 89 for other voltage options.
4)
Subtract 1,4 kg. for STD Electric models.
87
ZU4, Factory Installed Features & Options Hydraulic Technology Worldwide
ZU4-Series Features &

Options
The LCD, Pressure Transducer
and Heat Exchanger are factory
installed features and cannot be ordered
separately. The Skidbar can be installed
by customer or ordered pump mounted
from factory. Refer to pages 86-87 for
selection chart and page 89 for ordering
matrix.
Back-lit LCD 1) Pressure Transducer 3)

• Pump usage information, hour • More durable than analog gauges Pressure Transducer
and cycle counts • More accurate than analog This pressure transducer is
more durable against
• Low-voltage warning and gauges
mechanical and hydraulic shock
recording • Calibration can be fine tuned for than analog gauges.
• Self-test and diagnostic certification • Digital pressure read-out provides
capabilities • Easy-viewing variable rate display accuracy of 0,5% of full scale.
• Information can be displayed in • Easy-viewing variable rate display
• “Set pressure” feature turns off automatically varies increments
six different languages 2) motor at user defined pressure 4) between 3, 14, 35 and 145 bar as rate
1)
Included on pumps with solenoid • Display pressure in bar, MPa or of pressure change increases.
valves. Can be factory installed on • “Set pressure” feature turns off motor
psi
pumps with manual valve. at user defined pressure (or shifts
2)
English, French, German, Italian,
3)
Requires LCD Electric.
valve to neutral on models with VE33
Spanish and Portuguese.
4)
Or shifts valve to neutral position on
and VE43 solenoid valves).
pump models with VE33 and VE43
solenoid valves.
Heat Exchanger
Can be factory installed on
ZU4-Series LCD Electric
pumps.
• Extends system life.

• Stabilizes oil temperature at a
maximum of 54 °C at 21 °C ambient
temperature.
Do not exceed maximum oil flow and

pressure ratings. Heat exchanger is not
suitable for water-glycol or high water
Heat Exchanger 5) Skidbar 6) based fluids.
• Removes heat from the bypass oil • Provides easy two-hand lift
to provide cooler operation • Provides greater pump stability on
• Stabilizes oil viscosity, increasing soft or uneven surfaces
Thermal Maximum Maximum Voltage
oil life and reduces wear of pump • Also available as kit (Modelnr. Transfer * pressure oil flow
and other hydraulic components SBZ-4)
5)
Requires LCD Electric. Heat Exchanger Btu/h kJoule (bar) (l/min) (VDC)
6)
4 and 8 litres reservoirs only. Skidbar
adds 4,1 kg to pump weight. adds 2,2 kg to pump weight. 900 950 20,7 26,5 12
* At 1,9 l/min at 21 °C ambient temperature.
88 www.enerpac.com
ZU4-Series, Dimensions & Ordering Matrix
ZU4-Series with 4 and 8 litres reservoirs
ZU4 Dimensions (mm) ZU4
3/8"
18NPTF
Reservoir Size (liter) Series
4 8 10 20 40
A
A 432 495 447 472 559
B
B 142 203 155 180 270
C 279 287 419 414 399
229
D 152 167 305 422 505
C 95 12
181 414 65 D E – – 384 501 576 Reservoir Capacity:
483 240
630 267 F – – 279 396 480
4 - 40 litres
ZU4-Series with 10, 20 and 40 litres reservoirs User adjustable relief valve.
(left view shown without side handle) Oil fill port SAE #10 7/8”-14 Flow at Rated Pressure:
UNF-2B.
Oil level sight gauge. 1,0 l/min
Oil drain 1/2” NPTF.
3/8"
18NPTF
M8, 12 mm deep. Motor Size:
Handles on all 10, 20 and 40
33
A litres reservoirs. 1,25 kW
Factory installed features & options: Maximum Operating Pressure:
B Back-lit LCD Electric.
Pressure transducer. 700 bar
305 (4 x ø8,6) F
Heat Exchanger
C D
Skid Bar (Modelnr. SBZ-4).
163 447 E
Fits 4 and 8 litres reservoirs.
See page 84 for ZU4-Series flow diagram
This is how a ZU4-Series pump model number is built up: 7 Voltage

B = 115V, 1 phase, 50/60 Hz
Z U 4 1 04 D E - H K T E 2) = 208-240V, 1 phase, 50/60 Hz
(with European plug EMC
1 2 3 4 5 6 7 8 directive compliant).
Product Motor Flow Valve Reservoir Valve Voltage Factory installed features I = 208-240V, 1 phase, 50/60 Hz
Type Type Group Type Size Operation and options (with NEMA 5-15 plug).
2)
E-voltage meet all CE
1 Product Type 5 Reservoir Size requirements.
Z = Pump Class (usable oil capacity)
04 = 4 litres 8 Factory installed features & options
2 Prime Mover 08 = 8 litres (see page 88 for details)
U = Universal electric motor 10 = 10 litres 1) H Heat exchanger (requires pump
20 = 20 litres 1) with LCD Electric) adds 4,1 kg.
3 Flow Group 40 = 40 litres 1) K Skid bar (fits 4 and 8 litres
1)
reservoir includes side handles. reservoir) adds 2,2 kg.
4 = 1,0 l/min @ 700 bar
T Pressure transducer (requires
6 Valve Operation pump with LCD Electric).
4 Valve Type
D = Dump (solenoid valve with
(see page 133-137 for valve details)
pendant and LCD Electric)
1 = Dump VE32D
J = Jog (manual valve with
2 = 3-way, 2-pos. manual VM32
pendant and Standard
or electric VE32 ORDERING EXAMPLES
Electric i.e. without LCD)
3 = 3 way, 3 pos. manual VM33
K = Jog (manual valve with Model Nr: ZU4104DE-HKT
or electric VE33
pendant and LCD Electric) Two stage LCD Electric pump with dump
4 = 4 way, 3 pos. manual VM43
L = Manual valve with LCD valve and 4 litres reservoir, 230V motor,
or electric VE43
Electric (without pendant) heat exchanger, skidbar and pressure
6 = 3 way, 3 pos. manual locking
M = Manual valve with Standard transducer.
valve VM33-L with pilot
Electric (i.e. without LCD,
operated check.
without pendant) Model Nr: ZU4408JE
8 = 4 way, 3 pos. manual locking
S = Solenoid valve with pendant Two stage STD (standard) Electric pump
valve VM43-L with pilot
and LCD Electric. with manual valve with pendant (jog) and
operated check.
8 litres reservoir, 230V motor.
www.enerpac.com 89
ZE-Series, 700 Bar Electric Pumps Hydraulic Technology Worldwide
Shown from left to right: ZE3208MW, ZE5420SW-FHR
The New Standard for

Industrial Applications
Oil Level Glass

All ZE-Series pumps have an
oil sight glass and steel
reservoirs. Full sight oil level
glass on 10, 20 and 40 litres
reservoirs, oil level indicators on 4 and 8
litres reservoirs.
PUMP CONFIGURATIONS Pump Type Used with Valve Function 1) Valve 1) Useable
For options and other model numbers see ordering matrix or Tool or Model Oil
contact your Enerpac office. Cylinder Number Capacity
Page: 95 ®
(litres)
®
®
No Valve, without Electric Box 2) – 4
• For remote valves or pump mounting Enerpac VM-series valves – 10
• For remote valve mounting order BSS1090 high pressure – 20
connecting plate.
– 40
With Manual Valve, without Electric Box • – • – • VM32 4
• For single-acting or double-acting applications • – • • • VM33 8
MANUAL VALVE CONTROL
• On/off switch on 1-phase electric motor.

• – • • • VM33L 10
– • • • • VM43 20
– • • • • VM43L 40
With Manual Valve, with Electric Box • – • – • VM32 4
• For single-acting or double-acting applications • – • – • VM32 8
• On/off switch on 1-phase electric motor
• All options available.
• – • • • VM33 10
• – • • • VM33L 10
– • • • • VM43 20
– • • • • VM43L 40
With Solenoid Dump Valve, with Electric Box • – • – • VE32D 4
• Ideal for punching, crimping and cutting • – • – • VE32D 8
REMOTE VALVE CONTROL
• For use when load holding is not required

• Push-button pendant 3) controls valve and motor
• – • – • VE32D 10
• All options available. • – • – • VE32D 20

• – • – • VE32D 40
With Solenoid 3-position Valve, with Electric Box • – • • • VE33 4
• Ideal for production and lifting applications
• 3-position valves (advance/hold/retract)
• – • • • VE33 8
• Push-button pendant 3) controls valve and motor

• – • • • VE33 10
• All options available.

– • • • • VE43 10
– • • • • VE43 20
1)
– • • • • VE43 40
See Valve Section for hydraulic symbols and details.
2) For No Valve, with Electric Box, see ordering matrix on page 95.
3) Pendant includes 3 meters cord.
90 www.enerpac.com
ZE-Series, 700 Bar Electric Pumps
• High-efficiency pump design – higher oil flow and bypass
pressure, cooler running and requires 18% less current draw ZE
than comparable pumps Series
• High-strength, moulded electrical box protects electronics,
power supplies and LCD readout and stands up to harsh
industrial environments
• IP54 protection and isolation class
• Back-lit LCD provides self test, diagnostic and read-out
capabilities never before offered on an industrial pump Reservoir Capacity:
(included on pump with electric valves, optional on other 4 - 40 litres
models)
• Totally enclosed, fan-cooled industrial electric motors supply
extended life and stand up to harsh industrial environment 0,55 - 2,73 l/min
• User adjustable relief valve built-in on manual and solenoid Motor Size:
valves. Oil ports on valves are 3/8” NPTF
0,75 - 5,60 kW
• Steel fan guard on all electric motors
• Full sight oil level glass
• 40 micron filter breather with splash guard
700 bar
• Durable steel reservoirs.
User Adjustable Relief
Valve
ZE3-Series ZE4-Series ZE5-Series ZE6-Series All VM and VE-Series have a
0,55 l/min at 700 bar 0,82 l/min at 700 bar 1,64 l/min at 700 bar 2,73 l/min at 700 bar user adjustable relief valve to
Two-stage pump Two-stage pump Two-stage pump Two-stage pump allow the operator to easily
set the optimum working pressure.
Model Nr. 4) Model Nr. 4) Model Nr. 4) Model Nr. 4)
400V / 3 phase (kg) 400V / 3 phase (kg) 400V / 3 phase (kg) 400V / 3 phase (kg)
ZE3004NW 36 ZE4004NW 40 – – – –
ZE3010NW 45 ZE4010NW 49 ZE5010NW 54 ZE6010NW 72
ZE3020NW 57 ZE4020NW 61 ZE5020NW 66 ZE6020NW 84 Locking Valves
ZE3040NW 80 ZE4040NW 84 ZE5040NW 89 ZE6040NW 107 For applications requiring
ZE3204MW 39 ZE4204MW 43 – – – – positive load holding, VM-
ZE3308MW 44 ZE4308MW 48 – – – – Series valves (except VM32)
are available with a pilot-
ZE3610MW 50 ZE4610MW 54 ZE5610MW 59 ZE6610MW 77
operated check valve. This provides
ZE3420MW 60 ZE4420MW 64 ZE5420MW 69 ZE6420MW 87 hydraulic locking of the load until the
ZE3840MW 85 ZE4840MW 89 ZE5840MW 94 ZE6840MW 112 valve is shifted into the retract position.
ZE3204LW 42 ZE4204LW 46 – – – – To order this feature on your ZE-series
ZE3208LW 47 ZE4208LW 51 – – – – pump see the valve type in the order
ZE3310LW 51 ZE4310LW 55 ZE5310LW 60 ZE6310LW 78 matrix.
ZE3610LW 53 ZE4610LW 57 ZE5610LW 62 ZE6610LW 80
ZE3420LW 63 ZE4420LW 67 ZE5420LW 72 ZE6420LW 90 Page: 95
ZE3840LW 88 ZE4840LW 92 ZE5840LW 97 ZE6840LW 115
ZE3104DW 44 ZE4104DW 48 – – – – Single or Two-Stage
ZE3108DW 49 ZE4108DW 53 – – – – Choose single-stage pumps for
ZE3110DW 53 ZE4110DW 57 ZE5110DW 62 ZE6110DW 79 applications that require constant
ZE3120DW 65 ZE4120DW 69 ZE5120DW 74 ZE6120DW 92 flow regardless of pressure such as
ZE3140DW 88 ZE4140DW 92 ZE5140DW 97 ZE6140DW 115 testing or clamping.
ZE3304SW 49 ZE4304SW 53 – – – –
Two-stage pumps have an increased
ZE3308SW 54 ZE4308SW 58 – – – –
output flow at low pressure to allow fast
ZE3310SW 58 ZE4310SW 62 ZE5310SW 67 ZE6310SW 85 movement towards the load, for reduced
ZE3410SW 58 ZE4410SW 62 ZE5410SW 67 ZE6410SW 85 cycle times and increased productivity.
ZE3420SW 70 ZE4420SW 74 ZE5420SW 79 ZE6420SW 97
ZE3440SW 93 ZE4440SW 97 ZE5440SW 102 ZE6440SW 120
4) See custom ordering matrix on page 95 for other voltages.
91
ZE-Series, Factory Options & Accessory Kits Hydraulic Technology Worldwide
Electric Box 1) Level/Temperature Switch 4) Return Line Filter

• Back-lit LCD • Shuts down pump before oil level • 25 micron nominal filter removes
• Pump usage information, hour and reaches an unsafe level, avoiding contaminants from return oil flow
cycle counts damage due to cavitation before allowing it back into tank
• Low-voltage warning and recording • Shuts down pump when unsafe oil • Internal by-pass valve prevents
temperature is reached damage if filter is dirty
• Self-test and diagnostic capabilities
• Ideal if pump is used in remote area • With maintenance indicator
• Pressure read-out 2)
without visual access to oil level. • Replaceable filter element PF25.
• Auto-mode pressure setting 2) 4) 24 V, requires Electric Box. Available for 10,
• Information can be displayed in six 20 and 40 litres reservoirs.
languages 3)
1) Included on pumps with solenoid valves.
Can be factory installed on pumps with Acces- Fixed Operating Max. Acces- Maximum Maximum By-pass
manual valve. sory Kit Temperature Tempe- Pressure sory Kit Pressure Oil Flow Setting
Modelnr. Signal rature Modelnr.
2) When used with optional pressure (°C) (°C) (bar) (bar) (l/min) (bar)
transducer.
3) English, French, German, Italian, Spanish ZLS-U4 * 80 5 - 110 10 ZPF * 13,8 45,4 1,7
and Portuguese. * Add suffix L for factory installation. * Add suffix F for factory installation.
Roll Bars Skid Bar Foot Switch 5)
• For easy portability and hoisting • Provides easy two-hand lift • Hands-free remote control on
• Protects pump and electric box • Provides greater pump stability on solenoid dump and 3-position valves
• Available for all reservoir sizes. soft or uneven surfaces. • With 3 meters cord.
5) 15 V, requires Electric Box.
Accessory Fits on reservoir

Kit Nr.
(kg)
ZRB-04 * 4 and 8 litres 5,5 Acces- For ZE-Series pumps
sory with reservoir Accessory Can be used on ZE-Series
ZRB-10 * 10 litres 6,0 Kit Nr. (kg)
Kit Nr. pumps with
ZRB-20 * 20 litres 6,0 SBZ-4 * 4-8 ltr, without heat exchanger 2,2
ZRB-40 * 40 litres 6,0 SBZ-4L * 4-8 ltr, with heat exchanger 3,2 ZCF-2 * Solenoid VE-Series valves
* Add suffix R for factory installation. * Add suffix K for factory installation. * Add suffix U for factory installation.
92 www.enerpac.com
Factory Options & Accessory Kits for ZE-Series Pumps
Options
Accessory Kits can be installed by
customer. See chart below for options
on Standard Electric (without electric box) or
LCD Electric (with electric box). Refer to page
95 for ordering matrix.
ZE-Series Options Factory Accessory

Installed Kits
Std. LCD Std. LCD
Electr. Electr. Electr. Electr.
Return Line Filter F F ZPF ZPF
Pressure Transducer 1) Pressure Switch 2)
Skid Bar 1) K K SBZ SBZ
• Displays pressure on LCD in bar, • Controls pump, monitors system
Roll Bar R R SRB SRB
MPa or psi • Adjustable pressure 35-700 bar Single-stage S S – –
• More accurate than analog gauge • Includes glycerine filled 1000 bar – H – ZHE
Heat Exchanger
• Calibration can be fine-tuned for pressure gauge G2536L Pressure Gauge 2) G G – –
certification • Accuracy ± 1,5% of full scale. Pressure Switch 3) – P – ZPS-E3
• Easy-viewing variable rate display 2) 24 V, requires Electric Box. Not available in Pressure Transducer 4) – T – ZPT-U4
• “Set pressure” feature turns off combination with pressure transducer. Level/Temp Switch 5) – L – ZLS-U4
motor at user defined pressure. Foot Switch 6) – U – ZCF-2
1) 24 V, requires Electric Box. 1) Available for 4 and 8 litres reservoirs.
2) Not available on pumps with pressure transducer.
3) Includes 1000 bar gauge. Only available on manual
Acces- Adjustable Switch- Dead- Acces- Switch- Deadband Oil valves without locking feature.
sory Kit Pressure point band sory Kit point Ports 4) Electric box can accept either pressure switch or
Modelnr. Range repea- Modelnr. repea- pressure transducer, but not both.
(bar) tability (bar) tability (bar) (NPT) 5) Available for 10, 20 and 40 litres reservoirs.
6) For control of solenoid dump and 3-position valves.
ZPT-U4 * 3,5 - 700 ± 0,5% 3,5 ZPS-E3 * ± 2% 8 - 38 3/8”
* Add suffix T for factory installation. * Add suffix P for factory installation.
ZPT-U4 Pressure Transducer

More durable against mechanical
and hydraulic shock than analog
gauges.
• Digital pressure read-out provides
accuracy of 0,5% of full scale.
• Easy-viewing variable rate display
automatically varies increments between
3, 14, 35 and 145 bar as rate of pressure
change increases.
• “Set pressure” feature turns off motor at
user defined pressure (or shifts valve to
Pendants 3) Heat Exchanger 4) neutral on VE33 and VE43 valves).
• For pump types with valve • Removes heat from bypass oil to
operation “W” (No Valve, with provide cooler operation
Electric Box, without pendant) • Stabilizes oil viscosity, increasing
3) When ordering Enerpac VE-Series oil life and reduces wear of pump ZHE-Series Heat Exchangers
solenoid valve the pendant must be and other hydraulic components. Heat exchanger stabilizes oil
ordered separately. Pendant connection temperature at 54 °C at 21 °C
to be plugged into electric box ambient temperature. Thermal transfer at
1,9 l/min and 21 °C ambient temperature:
900 Btu/hour [950 kJ].
Pendant To be used with solenoid Accessory Fits on reservoir Do not exceed max. oil flow of 26,5 l/min
Model Nr. valve: Kit Nr. and max. pressure of 20,7 bar.
(kg) Not suitable for water-glycol or high
ZCP-1 VE32D ZHE-E04 * 4 and 8 litres 4,1 water based fluids.
ZCP-3 VE32, VE33, VE43 ZHE-E10 * 10, 20 and 40 litres 4,1
4) 24 VDC, requires electric box.
* Add suffix H for factory installation.

www.enerpac.com 93
ZE-Series, Specifications & Dimensions Hydraulic Technology Worldwide
Two-stage Single-stage
14 14 14 14
Oil Flow (l/min)
Oil Flow (l/min)
Oil Flow (l/min)
Oil Flow (l/min)

12 ZE3 12 ZE4 12 ZE5 12 ZE6
10 10 10 10
8 8 8 8
6 6 6 6
4 4 4 4
2 2 2 2
0 0 0 0
0 140 280 420 560 700 0 140 280 420 560 700 0 140 280 420 560 700 0 140 280 420 560 700
Pressure (bar) Pressure (bar) Pressure (bar) Pressure (bar)
ZE-SERIES PERFORMANCE CHART

Pump Output Flow Rate at 50 Hz * Pump Unit Available Motor Relief Sound Single or Two-Stage
Series (l/min) Reservoir Sizes Size Valve Level
(useable oil) Adjust- Choose single-stage
low pressure high pressure ment pumps for
Range applications that require
at at at at
7 bar 50 bar 350 bar 700 bar (litres) (kW) (bar) (dBA) constant flow regardless of
0,59 0,59 0,57 0,55 Single-stage pressure such as testing or
ZE3 4-8-10-20-40 0,75 70-700 75 clamping.
6,15 5,26 0,57 0,55 Two-stage
Two-stage pumps have an
0,87 0,87 0,84 0,82 Single-stage increased output flow at low
ZE4 4-8-10-20-40 1,12 70-700 75
8,88 8,20 0,84 0,82 Two-stage pressure to allow fast
1,75 1,72 1,68 1,64 Single-stage movement towards the load,
ZE5 10-20-40 2,24 70-700 75 for reduced cycle times and
11,61 11,27 1,68 1,64 Two-stage
increased productivity.
3,00 2,94 2,86 2,73 Single-stage
ZE6 10-20-40 5,60 70-700 80
12,29 12,15 2,86 2,73 Two-stage
* Oil flow will be approximately 6/5 of these values at 60 Hz.
640 330
4 2
65
5
640 1
3 H
A
User adjustable relief valve on all manual

B and solenoid valves.
3/8” NPTF on A and B ports;
6 C D 1/4”NPTF on auxiliary ports.
7
414 240
Electric Box
483 267
635 Heat Exchanger
ZE-Series Pumps with 4 - 8 litres reservoir Roll Bar
710 E1 Return Line Filter
Skid Bar
2 4 Oil Drain
Oil Drain / Oil Level/Temperature Switch
1
Reservoir ZE-Series Pump Dimensions (mm)
H Size (use-
A
able oil)
B A
(litres) A B C D E E1 H
B 4 457 143 279 152 – – 520
8 519 205 287 168 – – 582
3 8 C D 10 533 155 419 305 384 340 600
163 447 132 E 20 558 180 419 422 501 490 625
ZE-Series Pumps with 10 - 20 - 40 litres reservoir 40 648 270 399 505 576 572 715
94 www.enerpac.com
ZE-Series, Pump Ordering Matrix
This is how ZE-Series pump model numbers are built up:
ZE
Z E 4 1 10 D W - F H L T Series
1 2 3 4 5 6 7 8
Product Motor Flow Valve Reser- Valve Motor Factory installed options
Type Type Group Type voir Size Operation Voltage
1 Product Type 6 Valve Operation

Z = Pump Class D = Dump valve (solenoid), with Reservoir Capacity:
pendant and Electric Box
2 Prime Mover L = Manual valve, without 4 - 40 litres
E = Induction electric motor pendant, with Electric Box Flow at Rated Pressure:
M = Manual valve, without
3 Flow Group pendant, without Electric Box 0,55 - 2,73 l/min
N = No valve, without Electric Box
3 = 0,55 l/min @ 700 bar (0,75 kW) Motor Size:
S = Solenoid valve, with pendant
4 = 0,82 l/min @ 700 bar (1,12 kW)
5 1) = 1,64 l/min @ 700 bar (2,24 kW)
and Electric Box 0,75 - 5,60 kW
W = No valve, with Electric Box,
6 1) = 2,73 l/min @ 700 bar (5,60 kW) Maximum Operating Pressure:
without pendant 10)
4 Valve Type
7 Motor Voltage
700 bar
0 =
No valve, with coverplate
Single phase motor 3)
1 =
3/2 Dump valve VE32D
B 3) = 115V, 1 ph, 50-60Hz How to Order Single-Stage
2 =
3/2 manual VM32
E 3) = 208-240V, 1 ph, 50-60 Hz 4) Pumps
3 =
3/3 manual VM33 or
I 3) = 208-240V, 1 ph, 50-60 Hz To specify a single-stage pump,
electric VE33
(with USA plug). place the letter “S” at the end of the
4 = 4/3 manual VM43 or
electric VE43 model number. For example:
Three phase motor 5)
6 = 3/3 manual locking valve VM33L
M 5) = 190-200V, 3 ph, 50-60Hz ZE4210ME-S
with pilot operated check.
G 5) = 208-240V, 3 ph, 50-60 Hz ZE4-Series pump, oil flow 0,82 l/min at
8 = 4/3 manual locking valve VM43L
W 5) = 380-415V, 3 ph, 50-60 Hz 700 bar, VM32 manual valve, 10 litres
with pilot operated check.
K 5) = 440V, 3 ph, 50-60 Hz reservoir, without electrical box, without
J 5) = 460-480V, 3 ph, 50-60 Hz pendant, 240 Volt 1-phase electric motor
5 Reservoir Size, useable oil
R 5) = 575V, 3 ph, 60 Hz and single-stage pump unit.
04 2) = 4 litres
08 2) = 8 litres
ZE3120DW-S
10 = 10 litres
ZE3-Series pump, oil flow 0,55 l/min at
20 = 20 litres
700 bar, VE32D solenoid dump valve,
40 = 40 litres
20 litres reservoir, with electrical box,
without pendant, 400 Volt 3-phase
8 Factory installed options electric motor and single-stage pump
F = Return Line Filter P 7) = Pressure Switch unit.
G 6) = 1000 bar gauge R = Roll Bar
H 7) = Heat exchanger S = Single-stage pump unit
K = Skid Bar (only on 4-8 litres) T 7) = Pressure transducer 9)
L 7) = Oil Level/Temperature Switch 8) U 7) = Foot Switch
N = No reservoir handles (includes
lifting eyes)
1) ZE5 and ZE6-Series only available with 3-phase electric motors.
2) 4 and 8 litres only available on ZE3 and ZE4-Series. Pendants
3) 1-phase motors only available on ZE3 and ZE4-Series.
When ordering Enerpac VE-
4) 208-240V, 1 ph with European plug EMV directice compliant.
Series solenoid valve for use
5) Models with 3-ph motors without Electric Box shipped without cord, motor starter or
on “W” type valve operation
overload protection. (No Valve, with Electric Box,
6) Not available on pumps with pressure transducer (T).
7) Requires Electric Box.

without pendant) the pendant must be
8) Not available on 4 and 8 litres reservoir. ordered separately. Pendant connection
9) Provides digital pressure read-out on LCD-display of electric box. to be plugged into electric box.
10) When using solenoid valve on valve type “W” order optional pendant.
All Z-Class electric pumps comply with CSA and CE requirements.

Page: 93
www.enerpac.com 95
8000 and 9000-Series, Electric Pumps Hydraulic Technology Worldwide
Shown: PPE-9483-4
The Axial Piston

Pump with four
independant outlets
Hoses
hoses. To ensure the integri-
ty of your system, specify
only genuine Enerpac
hydraulic hoses.
Page: 120
• Single-speed operation with two and four independent Gauges

split-flow outlets Minimize the risk of over-
• Two-speed operation with high-flow outlet loading and ensure long,
• Oil delivery of each outlet remains equal regardless of your equipment. Refer to the
pressure System Components section for
• 60 litres usable oil capacity allows operation of a wide a full range of gauges.
Page: 119
range of cylinders
• Powerful 4 and 9,5 kW motor, available in three voltage
options Locking Valves
Pumps with VM33 or VM43
manual valves may be
ordered with locking valves.
This locking feature provides
a hydraulic lock for the cylinder using
pilot-operated check valves.
To order this option, just place an “L”
To lift a rigid construction, four double-acting suffix at the end of the model number.
RR-2006 cylinders are powered by a 4-split elec- For more information, contact your local
tric PPE-9483-4 pump. Enerpac office.
Page: 133
Pump Motor Usable Pump Pressure Output

Type Size Oil Series* Rating Flow Rate
Capacity (bar) (l/min)
(kW) (litres) 1st stage 2nd stage 1st stage 2nd stage
Two- 4,0 60 PPN-8000 190 700 14,5 1 x 4,2
speed 9,5 60 PPN-9000 300 700 14,5 1 x 8,0
Single- 9,5 60 PPN-9000-2 – 700 – 2 x 5,0
speed 9,5 60 PPN-9000-4 – 700 – 4 x 2,5
* The “N” in the model number stands for No Valve. All pump models can be ordered
with Manual or Solenoid Valves. See selection chart on next page.
96
8000 and 9000-Series, Electric Pumps
This is how 8000- and 9000-Series Pump Model Numbers
are built up: PP
Series
PP E - 9 4 8 3 - 2
1 2 3 4 5 6 7
Product Valve Pump Valve Reservoir Motor Split-flow
Type Control Series Type Capacity Voltage Outlets
Reservoir Capacity:
1 Product Type 5 Reservoir Capacity 80 litres
PP = Power Pump 8 = 80 litres (usable 60 ltr)
2 Valve Control 6 Motor Voltage* 4 x 2,5 to 8,0 l/min
N = No Valve 3 = 400 V, 3 ph, 50 Hz
M = Manual Motor Size:
5 = 230 V, 3 ph, 50 Hz
E = Solenoid (Electrical) 6 = 440 V, 3 ph, 50 Hz 4,0 - 9,5 kW
* In the selection chart below only
3 Pump Series 400V models (suffix 3) are Maximum Operating Pressure:
8 = 8000-Series, 4 kW shown. To order 230V or 440V
models, change this suffix to 5 or
700 bar
9 = 9000-Series, 9,5 kW
6.
4 Valve Type
Speed Chart
0 = No Valve 7 Split-Flow Outlets
3 = 3-way, 2-position, To determine how a specific
9000-Series only
manual valve (VM33) pump will operate your cylinder,
2 = 2 equal flow outlets
4 = 4-way, 3-position, see the Pump-Cylinder Speed Chart
of 5,0 l/min. at 700 bar
manual (VM43) or solenoid in the ‘Yellow Pages’.
4 = 4 equal flow outlets
valve (VE43) of 2,5 l/min. at 700 bar Page: 117
FLOW CHART
16
Oil flow (l/min)
14
12
155 225 225 225 610
10
1030 2
790 0
0 100 200 300 400 500 600 700
Pressure (bar)
PPN-9000 PPN-9000-2
PPN-8000 PPN-9000-4
40 965 475
Used with Valve Valve Function Valve 8000-Series 9000-Series 9000-Series 9000-Series
Cylinder* Control Model High-flow outlet High-flow outlet 2 Split-flow outlets 4 Split-flow outlets
Number
Model Model Model Model
Number (kg) Number (kg) Number (kg) Number (kg)
®
– – – – – – – PPN-8083 274 PPN-9083 303 PPN-9083-2 304 PPN-9083-4 328

• Manual • • • VM33 PPM-8383 275 PPM-9383 316 PPM-9383-2 319 PPM-9383-4 333
• Manual • • • VM43 PPM-8483 275 PPM-9483 316 PPM-9483-2 319 PPM-9483-4 333
• Solenoid • • • VE43 PPE-8483 286 PPE-9483 330 PPE-9483-2 340 PPE-9483-4 372
* = Single-Acting = Double-Acting
www.enerpac.com 97
Turbo II Air Hydraulic Pumps Hydraulic Technology Worldwide
Shown from top to bottom: PAMG-1402N, PARG-1102N, PATG-1102N, PATG-1105N
Setting New
Standards…
… in efficiency and
reliability
RFL-102 Regulator-Filter-
Lubricator
Recommended for use with
all Turbo air pumps.
Provides clean, lubricated air
and allows for air pressure adjustment.
Steel bowl guards are standard.
Large Reservoir Models

The Turbo II Air Pump is
also available with an
enlarged reservoir: PATG-
1105N, PAMG-1405N and
• External adjustable pressure relief valve (behind sight glass) PARG-1105N.
• Lower air consumption and operating costs
• Return-to-tank port for use in remote valve applications Hoses
• Internal pressure relief valve provides overload protection Enerpac offers a complete
• Quieter operation – reduced noise level to 75 dBA reduces line of high quality hydraulic
operator fatique hoses. To ensure the integri-
• Operating air pressure: 1,7-8,6 bar, enables pump to start at only genuine Enerpac hydraulic hoses.
extremely low pressure
• High efficiency cast aluminium air motor Page: 120
• Reinforced heavy-duty lightweight reservoir for applications
in tough environments Pump and Cylinder
• Air pendant for remote control operation Sets
Turbo II Air Pumps
• Composite air piston seal allows operation on completely dry
are also available as
air supply. sets (pump, cylinder, gauge, couplers
and hose) for your ordering conven-
ience.
Easily operated by hand or by foot. Page: 64
Used Usable Model

with Cylinder Oil Number
Capacity
(cm3)
Single- 2081 PATG-1102N*

Acting 3770 PATG-1105N
Single- 2081 PARG-1102N
Acting 3770 PARG-1105N
Double- 2081 PAMG-1402N
Acting 3770 PAMG-1405N
* Available as set. See note at this page.
98
Turbo II Air Hydraulic Pumps
PATG-models use a FLOW CHART
foot or hand operated 1,2
PATG
Oil flow (l/min)

treadle to control air PAMG
and valve functions. 1,0
PARG
PAMG-models use a treadle Series
0,8
with a locking feature to con-
trol air, and a 4-way manual
0,6
valve to control hydraulics.
PARG-models use air pen- 0,4
dant for remote control. Reservoir Capacity:
0,2
2,5 - 5,0 litres
0
0 100 200 300 400 500 600 700 Flow at Rated Pressure:
PATG, PARG PAMG
A AB
Pressure (bar) 0,08 - 0,16 l/min
PATG, PAMG Series Air Consumption:
PARG Series
at 6,9 bar air pressure
227 - 340 l/min
700 bar
Maximum Output Flow Rate (l/min) Pump Valve function Air Pressure Air Consumption Sound
Pressure air supply air supply Series Range air supply to Level
to pump to pendant (l/min) @ 5,2 bar air
(bar) No Load Load No Load Load (bar) Pump Pendant (dBA)
700 1,00 0,16 – – PATG Advance / Hold / Retract 1,7 - 8,6 340 – 75
700 0,76 0,08 0,84 0,10 PARG Advance / Hold / Retract 2,8 - 10,3 227 285 75
700 1,00 0,16 – – PAMG Advance / Hold / Retract 1,7 - 8,6 340 – 75
M M
A A A N
RELEASE
PRESS
E B F E B B E
Filtered ‘Permanent’ Tank

3/8"-18NPTF 3/8"-18NPTF 3/8"-18NPTF
Vent
3/8"-18NPTF
Return-to-Tank/Auxiliary
3/8"-18NPTF
3/8"- Vent/Fill Tank Port
1/4"-18NPTF 18NPTF 1/4"-18NPTF
Hydraulic Output
C Swivel Air Input with Filter
C C
H 4 Mounting Holes for #10
L J H L J H
thread forming screw.
Maximum depth into reser-
K D K D K D voir = 19 mm
PATG-1102N PAMG-1402N PARG-1102N Air Input with Filter on PARG
PATG-1105N PAMG-1405N PARG-1105N models 1/4”-18NPTF
Valve Operation Turbo II Dimensions (mm) Model

Number
A B C D E F H J K L M N kg
313 165 211 230 102 – 129 146 42 113 347 – 8,2 PATG-1102N*
Treadle 3/3
396 201 209 230 102 – 131 146 86 112 437 – 9,9 PATG-1105N
313 165 200 230 102 – 129 – 42 – – 4500 10,0 PARG-1102N
Air Pendant 3/3
396 201 209 230 102 – 131 – 86 – – 4500 11,7 PARG-1105N
313 165 267 230 102 36 130 152 42 113 315 – 11,0 PAMG-1402N
Manual 4/3
396 201 267 230 102 36 132 152 86 112 405 – 12,7 PAMG-1405N
www.enerpac.com 99
Air Hydraulic Pumps Hydraulic Technology Worldwide
Shown from top to bottom: PA-1150, PA-133
PA
Series
Reservoir Capacity:
0,6-1,3 litres
0,13 l/min
Air Consumption:
255 l/min
700 bar
PC-66 Reservoir
Conversion Kit
Double the reservoir capaci-
ty of your existing PA-133
with this easy to install con-
version kit.
Oil flow (l/min) FLOW CHART
• Rugged construction – built for long life and easy service

0,7
• Swivel coupling simplifies hydraulic connection and pump
0,6
operation
0,5
• Three-position treadle provides cylinder advance, hold or 0,4
retract operation
0,3
• Operates in all positions for increased versatility in use 0,2
and mounting (except PA-1150) 0,1
• Base mounting slots provided on PA-133 0
0 100 200 300 400 500 600 700
Pressure (bar)
Air pressure:
PA-Series (@ 6,9 bar)
Air Input Hydraulic Output

1/4"-18NPTF 3/8"-18NPTF 102 35 281
3/8"-18NPTF
373 Hydraulic
102 35 1/4"-18NPTF
3/8"- Output
Air Input
18NPTF 209
145 118
ø8 (4x) ø72
84 56 69
114 177 1/2"-20UNF 158 1/4"-20UNF 254

142 33 254 Fill Tank Port 171 Fill Tank Port 279
PA-133 (mm) PA-1150 (mm)
Used Usable Model Pressure Output Flow Rate Valve Function Air Air Sound
with Oil Number Rating Pressure Consump- Level
(l/min)
Cylinder Capacity Range* tion
(cm3) (bar) No load Load (bar) (l/min) (dBA) (kg)
Single- 589 PA-133 700 0,65 0,13 Advance/Hold/Retract 2,7-6,9 255 85 5,4
Acting 1311 PA-1150 700 0,65 0,13 Advance/Hold/Retract 2,7-6,9 255 85 8,2
* Recommended Regulator-Filter-Lubricator: RFL-102.
100
Air Hydraulic Pumps
Shown: PAM-1041
PAM
Series
Reservoir Capacity:
4,0 - 8,0 litres
0,15 l/min
Air Consumption:
510 l/min
700 bar
Locking Valves
Pumps with 4/3 manual
valves are available with 4/3
manual locking valves
instead. Add suffix “L” to
pump model number.
Page: 136
• Twin air motor configuration delivers high-flow performance VA-2 Remote Valve
in first stage, up to 14 bar, for rapid cylinder advance For remote operation of
• 4 and 8 litres reservoirs for use with a wide range of PAM-Series air pumps.
cylinders Permits either hand or foot
operation.
• Integral shroud protects air motors and provides easy carry
FLOW CHART
3/8"-18NPTF On/Off Air Valve
Oil flow (l/min)
Hydraulic 14,0
Output
12,0
10,0
4 Litres
8 Litres
8,0
6,0
4,0
387
457
2,0
0
0 100 200 300 400 500 600 700
Pressure (bar)
162 6 19 190
230 308 PAM-10 Series (@ 6,9 bar)
320 1/4"-18NPTF
Air Input
PAM-Series (mm)
Used Usable Model Pressure Output Flow Rate Valve Function Valve Air Air Con- Sound
with Oil Number Rating Type Pressure sump- Level
(l/min)
Cylinder Cap. with Range* tion
(litres) Shroud (bar) 1st stage 2nd stage (bar) (l/min) (dBA) (kg)
Single- 2,6 PAM-1021 700 10,65 0,15 Adv./Hold/Retr. 3/2 2,7-6,9 510 87 22,7
Acting 7,6 PAM-1022 700 10,65 0,15 Adv./Hold/Retr. 3/2 2,7-6,9 510 87 27,2
Double- 2,6 PAM-1041 700 10,65 0,15 Adv./Hold/Retr. 4/3 2,7-6,9 510 87 22,7
Acting 7,6 PAM-1042 700 10,65 0,15 Adv./Hold/Retr. 4/3 2,7-6,9 510 87 27,2
* Recommended Regulator-Filter-Lubricator: RFL-102.
www.enerpac.com 101
PAH-Series, Air Hydraulic Pumps Hydraulic Technology Worldwide
Shown: PAH-90
The High-Flow
‘Multi-Fluid’ Pump

Corrosion resistant hand
pumps for low pressure fill-
ing and high pressure test-
ing applications, suitable for
a wide range of fluids.
Page: 74
Hoses
• Converts 2-7 bar air pressure to 18-900 bar hydraulic line of high quality hydraulic
pressure hoses. To ensure the integri-
• Can be used with hydraulic oil or other non corrosive only genuine Enerpac
liquids such as water, kerosene, gasoline etc. hydraulic hoses.
Page: 120
• Six models offer many pressure-flow combinations
• User supplied valving and reservoir provides system
Gauges
flexibility
• Exhaust-air muffler lowers sound level for reduced overloading and ensure
operator fatigue long, dependable service
• Heavy duty construction for long life, even in harsh from your equipment. Refer
environments to the System Components section
for a full range of gauges.
• Ideal for multi-fluid testing applications Page: 119
The PAH-05 was selected for pumping

water at high flow for testing a heat
exchanger. The PAH-Serie pumps can be reservoir mounted (except PAH-90) or connected to an external tank.
Reservoir mounted External tank

Air pressure Air pressure
;;;;
yyyy
;;;; ;;;;
yyyy
yyyy
;;;;
yyyy
;;;;
yyyy
;;;;
yyyy
;;;;
yyyy ;;;;
yyyy
;;;
yyy
yyy
;;;
;;;
yyy
;;;
yyy
P P T ;;;;
yyyy
;;;;
yyyy
;;;;
yyyy
;;;;
yyyy
;;
;;
;;
;;
;;
;;
;;
;;
max. T
;;;;
yyyy
0,5 m yyyy
;;;;
;;;;
yyyy
;;;;
yyyy 150-200μ filter 150-200μ filter
;;;;
yyyy
;;;;
yyyy
102
Air Hydraulic Pumps
All PAH-Series air
hydraulic pumps require a
PAH
user supplied remote valve
Series
and reservoir.
For more ordering information, call your
Enerpac distributor. For a full range of
valves, please refer to the valve section
of this catalogue.
Page: 133 Pressure Intensification Ratio:

1:9 - 1:165
0,17-5,00 l/min
Air Consumption:
3000 l/min
ø230 Exhaust
Air inlet 55 G3/4"
muffler Maximum Operating Pressure:
G1/4"
76 56-900 bar
36
95 FLOW CHART
15
Oil flow (l/min)

12
ø204
393 313
222
9
ø196
76 3
44
15
208 0
160 0 50 100 150 200 250
135 Pressure (bar)
PAH-22 PAH-12 PAH-05

G3/8" G3/8"
FLOW CHART
A R
5
Oil flow (l/min)
12,5
4
3
Maximum Output Model Air Pressure Sound
Pressure Flow Rate Number Pressure Intensification Level
Rating (l/min) Range Ratio 2
(bar) no load load (bar) (dBA) (kg)

1
56 13,0 5,0 PAH-05 2-7 1:9 80-85 19
120 8,5 2,0 PAH-12 2-7 1:20 80-85 19
0
220 6,8 1,7 PAH-22 2-7 1:36 80-85 19 0 200 400 600 800
400 4,2 1,3 PAH-40 2-7 1:67 80-85 19 Pressure (bar)
800 2,1 0,38 PAH-80 2-7 1:127 80-85 19
PAH-40 PAH-80 PAH-90
900 1,5 0,17 PAH-90 2-7 1:165 80-85 19
www.enerpac.com 103
PGM-Series, Gasoline Pumps Hydraulic Technology Worldwide
Shown from left to right: PGM-3410R, PGM-2408R, PGM-5410R
Featuring Genesis
Technology
Hoses
hoses. To ensure the integri-
only Enerpac hydraulic
hoses.
Page: 120
• Patented Genesis Technology means Gauges

- coaxial piston design ensures high performance Minimize the risk of over-
- first-stage piston pump for improved efficiency loading and ensure long,
• High by-pass pressures improve productivity dependable service from
• All Atlas pumps feature sturdy Roll Cages for use in tough System Components section for
environments a full range of gauges.
Page: 119
• 4, 8, 20 and 40 litres reservoirs for use with a wide range
of cylinders
• Available in three four-cycle motor sizes: 2,2 - 3,7 - 4,0 kW
This PGM-5310R is used to power a hydraulic

Used Usable Model Pressure Output Flow Rate
re-bar cutter on a construction site before
with Cylinder Oil Number Rating (l/min)
power was available.
Capacity
(litres) (bar) 1st stage 2nd stage
Single-Acting 3,8 PGM-2304R* 700 3,2 0,66
Double-Acting 3,8 PGM-2404R* 700 3,2 0,66
Single-Acting 7,6 PGM-2308R* 700 3,2 0,66
Double-Acting 7,6 PGM-2408R* 700 3,2 0,66
9,5 PGM-3310R 700 7,8 0,90
Single-Acting
18,9 PGM-3320R 700 7,8 0,90
9,5 PGM-3410R 700 7,8 0,90
Double-Acting
18,9 PGM-3420R 700 7,8 0,90
9,5 PGM-5310R 700 7,8 1,6
Single-Acting
18,9 PGM-5320R 700 7,8 1,6
9,5 PGM-5410R 700 7,8 1,6
Double-Acting 18,9 PGM-5420R 700 7,8 1,6
37,8 PGM-5440R 700 7,8 1,6
* Note: The PGM-20 series are available with a carrying handle instead of a rollcage.
For ordering omitt the ‘R’ from the model number
104
Atlas Series, Gasoline Pumps
Atlas Gasoline Pump
Performance PGM
Elevation can affect the per- Series
formance of any gasoline engine.
Atlas pumps are designed to develop
rated performance at elevations up to
1500 m.
For applications above this elevation,

please consult your Enerpac office. Reservoir Capacity:
4, 8, 20 and 40 litres
0,66 -1,6 l/min
3/8"-
Motor Size:
18NPTF 2,2- 4,0 kW
571
700 bar
558 444 Speed Chart

PGM-20 series Chart in our ‘Yellow Pages’
section.
Page: 117
571 (8 and 20 litres)
863 (40 litres)
3/8"-
18NPTF
558 444
PGM-30 and PGM-50 Series

FLOW CHART
By-Pass Valve Type Valve Function Motor Sound
8,0
Oil flow (l/min)
Pressure Type / Size Level

7,0
(bar) (dBA) (kg)
6,0
140 3-way, 3-position Advance/ Honda 89 25
5,0
140 4-way, 3-position Hold/Retract 2,2 kW 89 25
4,0
140 3-way, 3-position Advance/ Honda 89 33
140 4-way, 3-position Hold/Retract 2,2 kW 89 33 3,0
140 3-way, 3-position 93 55 2,0
140 3-way, 3-position Advance/ Briggs 93 68 1,0

140 4-way, 3-position Hold/Retract 3,7 kW 93 55 0
140 4-way, 3-position 93 68 0 100 200 300 400 500 600 700
140 3-way, 3-position 93 59 Pressure (bar)
140 3-way, 3-position Honda 93 75

Advance/ PGM-20 Series Atlas
140 4-way, 3-position 4,0 kW 93 59
Hold/Retract PGM-30 Series Atlas
140 4-way, 3-position 93 75 PGM-50 Series Atlas
140 4-way, 3-position 93 93
www.enerpac.com 105
Global Warranty Policy Hydraulic Technology Worldwide
ENERPAC products are warranted to be free of THE FOREGOING WARRANTY IS EXCLUSIVE

defects in materials and workmanship under AND IS IN LIEU OF ALL OTHER EXPRESS AND
normal use for as long as they are owned by the IMPLIED WARRANTIES, INCLUDING BUT NOT
original purchaser, subject to the exclusions and LIMITED TO THE IMPLIED WARRANTIES OF
limitations described below. This warranty does not MERCHANTABILITY AND FITNESS FOR A
cover ordinary wear and tear, overloading, PARTICULAR PURPOSE.
alterations, (including repairs or attempted repairs
by parties other than ENERPAC or its authorised The remedy of repair, replacement or refund is
service representatives), improper fluid, use in a customer’s exclusive remedy in the event of breach
manner for which they are not intended or use of this warranty.
which is contrary to instructions for the products. SELLER SHALL NOT BE SUBJECT TO AND
THIS WARRANTY IS LIMITED TO NEW DISCLAIMS:
PRODUCTS SOLD THROUGH ENERPAC (a) ANY OTHER OBLIGATIONS OR LIABILITIES
AUTHORISED DISTRIBUTORS, ORIGINAL ARISING OUT OF BREACH OF CONTRACT
EQUIPMENT MANUFACTURERS OR OTHER OR OF WARRANTY,
DESIGNATED CHANNELS OF DISTRIBUTION. (b) ANY OBLIGATIONS WHATSOEVER ARISING
NO AGENT, EMPLOYEE, OR OTHER FROM TORT CLAIMS (INCLUDING
REPRESENTATIVE OF ENERPAC HAS THE NEGLIGENCE AND STRICT LIABILITY) OR
AUTHORITY TO IN ANY WAY CHANGE OR ARISING UNDER THEORIES OF LAW WITH
AMEND THIS WARRANTY. RESPECT TO PRODUCTS SOLD OR SERVICES
RENDERED BY SELLER OR ANY
Electronic products and components are warranted UNDERTAKINGS, ACTS OR OMISSIONS
against defects in material and workmanship for a RELATING THERETO, AND
period of two years from the date of purchase. (c) ALL CONSEQUENTIAL, INCIDENTAL AND
CONTINGENT DAMAGES WHATSOEVER.
The following items supplied with ENERPAC
products are excluded from this warranty: ENERPAC’s liability in all cases is limited to, and
• Components not manufactured by ENERPAC, shall not exceed, the purchase price paid.
including air motors, electric motors, gasoline
engines, and diesel engines. Such items are
warranted to the extent of the warranty provided
by the manufacturers of such items.
• Consumable items, including cutter blades, nut
splitter chisels, punches and dies.
• Chains
If the customer believes a product is defective, the

product must be delivered, or shipped freight
prepaid, to the nearest ENERPAC Authorised
Service Center. The customer should contact
ENERPAC to locate an Authorised Service Center in
the customer’s area. Products that do not conform
to this warranty will be repaired or replaced at
ENERPAC’s expense and returned by ground
transportation, freight prepaid. Effective June 1, 1997
106
Yellow Pages Overview
?
Enerpac ‘Yellow Pages’ Section Page
i
stand for Safety Instructions
✗
108-109
Hydraulic Information!
If selecting hydraulic equipment is not your
Pump Selection and
daily routine, then you will appreciate these 110-111
Selection Worksheet
pages. The ‘Yellow Pages’ are designed to help
you work with hydraulics. They will help you to Basic System
112-113
better understand the basics of hydraulics, of Set-ups
system set-ups and of the most commonly used
Basic Hydraulics
hydraulic techniques. The better your choice of 114-115

Q

@
;
equipment, the better you will appreciate ;@Q ;@Q

Q

@
;
avel 75 ton
hydraulics. Take the time to go through these

50 ton
30 ton No d
25 ton No d Loa
d Loa
Conversion Tables d Loa
116-117
No d Loa d
No d Loa ommende
oad Loa
d Loa Not rec
4,4 0,4
1,3 0,8 6,3 0,6
11 1,1 14 1,3
14 1,4 20 1,9
3,3 0,4
‘Yellow Pages’ and you will benefit even more

35 3,2
44 4,1 4,8 0,6
0,9 0,9
and Speed Charts 10
2,8
26
1,4
2,8
2,8
8,1 1,1
2,2 2,2
20 2,2
1,3 1,3
12
1,9
1,3 8,3
1,9 1,3
0
1
4,1 3,3 3,3 1,9 14

4,1 20
34 3,3
from Enerpac High Pressure Hydraulics.

4,1 3,6 3,6 2,5
43 6,0
7 6 6,0
Valve Information A

Q

@
;
118
T
GLOBAL LIFETIME WARRANTY STATEMENT
Enerpac products are warranted to be free of defects in materials and workmanship.

www.enerpac.com
Any product that does not conform to specification will be repaired or replaced at
Visit our web site for the Enerpac’s expense, anywhere in the world; simple as that !!
complete Global Lifetime
Warranty or call your This warranty does not cover ordinary wear and tear, abuse, misuse, alterations,
Authorized Service Center. or the use of improper fluids. Determination of the authenticity of a warranty claim
will be made only by Enerpac or its Authorized Service Centers.
Page: 106
Enerpac is certified for severalUL approved Canadian Standards EMC Directive 89/336/EEC
quality standards. These All electrical components used Association Where specified, Enerpac
!
standards require compliance on Enerpac products carry the Where specified, electric power pumps meet
with standards for UL rating when possible. Enerpac electric pump the requirements for Electro-
management, administration, assemblies meet the design, magnetic Compatibility per
product development and IP 55F assembly and test EMC Directive 89/336/EEC.
manufacturing. All electric motors used on requirements of the Canadian
Enerpac worked hard to earn Enerpac power pumps meet Standards Association. CE Marking
the quality rating ISO 9001, in this protection and insulation & Conformity
its ongoing pursuit of classification. Product Design Criteria Enerpac provides a
excellence. All hydraulic components are Declaration of Conformity and
DIN 20024 designed and tested to be CE marking for products that
ASME B30.1 Enerpac thermoplastic hoses safe for use at maximum conform with the European
Our cylinders fully comply with are related to the criteria set 700 bar pressure unless Community Directives.
the criteria set forth by the forth in Deutsche Industrie otherwise specifically noted.
American National Standards Norm 20024.
Institute (except ‘BRD’, ‘CLL’
and CLS series).
www.enerpac.com 107
yy
;;
;;
yy THINK
SAFETY
Safety Instructions
Hydraulic power is one of the

safest methods of applying
force to your work - when used
correctly. And to that end we
offer some DOs and DON’Ts,
simple common sense points
which apply to practically all
Enerpac hydraulic products.
The line drawings and application

customers have used hydraulics
in industry. In designing similar
systems, care must be taken to
select the proper components
that provide safe operation and fit
your needs. Check to see if all
safety measures have been taken
to avoid the risk of injury and
property damage from your
application or system. Enerpac
application of its products. Please
contact the Enerpac office or a
representative for guidance when
you are in doubt as to the proper
safety precautions to be taken in
designing and setting up your
particular system.
In addition to these tips, every
Enerpac product comes with
instructions spelling out specific
photo’s of Enerpac products can not be held responsible for safety information. Please read
throughout this catalog are used damage or injury, caused by them carefully.
to portray how some of our unsafe use, maintenance or
Jacks
✗ ✓ Provide a level ✗ ✓ The entire jack
and solid saddle must be in
support for the contact with the
entire jack base load. Movement
area. of the load to be
in the same
direction as jack
plunger.
✓ ✓
yy
;;
✗ Never place any ✗ Remove the jack

part of your body handle when it is
under the load. not being used.
Ensure the load is
on a solid
support before
venturing under.
Cylinders
✗ ✓ Provide a solid ✗ ✓ The entire cylinder
support for the saddle must be in
entire cylinder contact with the
base area. Use load. Movement of
cylinder base the cylinder must be
attachment for parallel with the
more stability. movement of the
load.
✗ ✓ Do not use cylinder ✗ ✓ As with jacks,

without saddle. never place any
This will cause part of your body
plunger to under the load.
;y
”mushroom”. Load must be on

Saddles distribute cribbing before
load evenly on the venturing under.
plunger.
✗ ✓ Always protect ✗ ✓ Keep hydraulic

cylinder threads equipment away
for use with from open fire and
attachments. tempertures above
65 °C (150 °F).
108
;yy; Safety Instructions
;y
y;
General
Manufacturer’s rating of load and stroke are maximum safe limits.

Good practice encourages using only 80% of these ratings!
✓ Always read ✗ ✓ Don’t override the
instructions and factory setting of
safety warnings relief valves.
that come with Always use a
your Enerpac gauge to check
hydraulic system pressure.
equipment.
Pumps
✗ ✓ Don’t use handle ✗ ✓ Close release valve
extenders. finger tight. Using
Hand pumps force will ruin the
should be easy to valve.
operate when
used correctly.
✗ ✓ Fill pump only to ✗ ✓ Use only genuine

recommended Enerpac hydraulic
level. Fill only oil. Wrong fluid can
when connected destroy seals and
cylinder is fully pump and will render
retracted. your warranty null
and void your
guarantee.
Hoses and couplers

✗ ✓ Clean both ✗ ✓ Detach cylinder
coupler parts only when fully
before retracted or use
connecting. shut-off valves or
Use dust caps safety valves to
when coupler lock-in cylinder
parts are not pressure
connected.
yyy
;;; ;;;
yyy
y; ;
y
✗ ✓ Keep hoses away ✗ ✓ R = 115 mm
Don’t kink hoses.
from the area Bending radius
yy
;;
;;;yyy
yyy
should be at least
;;;
beneath loads.
115 millimetres.
Don’t drive over or
drop heavy objects
on hoses.
;;
yy
✗ ✓ Don’t lift
hydraulic
equipment by the • Lift slowly and check often
hoses.
• Avoid standing in the line of force
THINK
• Anticipate possible problems
SAFETY and take steps to avoid them
www.enerpac.com 109
Pump Selection Hydraulic Technology Worldwide
HAND PUMP AND SINGLE-ACTING CYLINDER MATCHING CHART

Capacity (ton)
Stroke 5t 10 t 15 t 25 t 30 t 50 t 60 t 75 t 100 t 150 t
< 25 mm
25 mm
50 mm
75 mm
100 mm
125 mm
150 mm
175 mm
200 mm
225 mm
250 mm
300 mm
325 mm
350 mm
P-392 P-80 P-462
Page: 68 Page: 70 Page: 70

Note: Selection based on oil capacity requirements of cylinders.
POWER PUMP SELECTION CHART
Low Medium High

Oil Flow* (0,1 - 0,3 l/min) (0,5 -2,0 l/min) (2,0 - 14,5 l/min)
Usable Oil Capacity 1,9 - 3,8 litres 5,7 litres 4 - 40 litres 4 - 40 litres 10 - 40 litres 60 litres
Duty Cycle** Intermittent Extended Intermittent Extended Extended Extended
Portable/Stationary*** Portable Stationary Portable Stationary Stationary Stationary
Recommended Series PU-Series PE-Series ZU4-Series ZE3-, ZE4- and ZE6-Series 8000-Series
Economy Submerged ZE5-Series 9000-Series
Page: 78 Page: 80 Page: 86 Page: 90 Page: 90 Page: 96

* Oil Flow • Determined by motor size
• Directly affects electrical power requirements
• Determines cylinder or tool speed
** Duty Cycle • Extended applications require more than one hour of interrupted pump use
• Intermittent would be used less than one hour of continuous pump use.
*** Portability Portable Stationary

• Ergonomic handles • Mounting options
• Flexible power requirements • Normally requires stable power
110
Selection Worksheet
Complete the following information to select the right products:
Cylinder Question: Tips/help Data Model Number

Selection
Total force required in tons: Total load
Number of cylinders required: Number of lifting points
Force per cylinder in ton: Should be 80% of total cylinder cap.
Stroke required: Plunger travel
Single or double-acting (D/A): D/A used when pull force is required,
or retract speed is critical
Type of plunger required: Hollow or solid
Collapsed height required:
Optional saddle required: Tilt, Grooved, Flat
Cylinder base: Improves stability
Cylinder attachments: (RC-series) Expanded functions
Selected cylinder model:

Including coupler model:
Pump Available power source: Manual Electric Compressed Air Petrol

Selection
The three most Hand pump Not for high cycle applications
commonly Single- or double-acting operation Use 4-way valve for D/A applications
selected Check speed chart on page 117 for number of mm per stroke)
pumps are Selected hand pump:
hand pumps,
electric pumps
and air-driven Electric or Compressed Air pump
pumps. Need for portability:
Gas powered Duty cycle: Intermittent or extended
pumps, how- Required usable oil capacity: Intermittent =1,2 x oil capacity
ever can be high cycle = 2 x oil capacity
selected in the
Available Voltage:
same way.
Lifting speed (Important/not important): Use speed chart on page 117
Type of control: Manual/remote pendant
Type of actuation/function: Advance/hold/retract
Accessories: Filter Kit, Level Switch, Roll bar ...
Selected pump:
Including Coupler: Oil connection
System Number of hoses and length required:

Components Selected Hoses:
Manifold or tee:
Extra hose per manifold (2):
Gauge (kN or bar scale): GF-series for high cycle
Gauge adapter:
Fittings:
Pressure Relief Safety Valve:
Load-holding Valve(s):
Hydraulic oil:
www.enerpac.com 111
Basic System Set-ups Hydraulic Technology Worldwide

1 Cylinder Single-acting push application, such as in a press.
The handpump offers controlled cylinder advance, but may
Applies hydraulic force.
Page 7 require many handpump strokes in longer stroke applications
when the cylinder capacity is 25 ton or above.

2 Cylinder Base Plate
Examples of pump, hose and cylinder sets can be found on
For applications like lifting
where additional cylinder page 64.
stability is required.
Page 12

3 Pump
Provides hydraulic flow.
Page 67 ;@Q

4 Hose
Transports hydraulic fluid.
Page 120-121

5 Male Coupler
For quick connection of the
hose to system components.
Page 122-123

6 Female Coupler Single-acting cylinder with longer stroke
used for lifting applications.
For quick connection of the
hose end to the system
components.
Page 120-121

7 Gauge
To monitor pressure of the
hydraulic circuit.
Page 126-131
;@Q

8 Gauge adaptor
For quick and easy gauge
installation. Page 132

9 Swivel connector
Allows proper allignment of
valves and/or gauges. Used
when units being connected
cannot be rotated.
Page 132 Double-acting cylinder set-up used for lifting
applications where a slow controlled descent

10 Auto-Damper Valve V-10 of the load must be maintained.
Used to protect gauge from
damage due to sudden
pressure pulses in the system.
Needs no adjustment and
allows correct positioning of
gauge, prior to tightening. ;@Q
Page 138-139
;@Q

11 4-Way Directional
Control Valve
Controls the direction of
hydraulic fluid in a
double-acting system.
Page 136
112
Basic System Set-ups
Double-acting cylinder set-up used in a push/pull application.

12 3-Way Directional
Control Valve
Controls the direction
of hydraulic fluid in a
single-acting system.
Page 134

13 Safety Holding Valve
Controls load descent in
;@Q lifting applications.
;@Q Page 138-139
;@Q
;@Q
14 Manifold
Allows distribution of
hydraulic fluid from one power
source to several cylinders
Page 124

15 Needle valve
Regulates the flow of
hydraulic fluid to or from
Two point lifting set-up using single-acting cylinders. the cylinders.
Page 138-139

Q

@
;

Q

@
;
www.enerpac.com
Visit our web site to
learn more about
hydraulics and system set-ups.
Four point lifting set-up, using single-acting cylinders and
directional control valves.
;@Q
;@Q ;@Q
;@Q
www.enerpac.com 113
Basic Hydraulics Hydraulic Technology Worldwide
Flow A hydraulic pump produces flow. Pressure Pressure occurs when there is
resistance to flow.

Q

@
;
Pascal’s Pressure applied at any point To have all cylinders operate
Law upon a confined liquid is uniformly so that the load is
transmitted undiminished in all being lifted at the same rate at
directions (Fig.1). each point, either control
This means that when more valves (see Valve section) or
than one hydraulic cylinder is Synchronous Lift System
being used, each cylinder will components (see Cylinder
lift at its own rate, depending section) must be added to the
on the force required to move system (Load B).
the load at that point (Fig. 2).
Figure 1
Cylinders with the lightest load
will move first, and cylinders
with the heaviest load will move
last (Load A), as long as the
cylinders have the same
capacity. ✗ WRONG!
✓ RIGHT!
Load A
Gauge
Load B

Q

@
;
Q

@
;

Q

@
;
Q

@
;
Cylinder
Pump
Figure 2 Synchronous Lift or Control Valves

Manifold to provide uniform lifting of load.
CAUTION! Learn more about hydraulics

When lifting or pressing, Visit www.enerpac.com to
always use a gauge. learn more about hydraulics
A gauge is your ‘window’ to and system set-ups.
the system. It lets you see what’s going
on. You will find the gauges in the
System Components section.
Page: 119
114
Basic Hydraulics
Force The amount of force a hydraulic Example 1

cylinder can generate is equal An RC-106 cylinder with 14,5 cm2 effective area operating at
to the hydraulic pressure times 700 bar will generate what force?
the “effective area” of the Force = 7000 N/cm2 x 14,5 cm2 = 101500 N = 101,5 kN
cylinder (see cylinder selection
charts). Example 2
An RC-106 cylinder lifting 7000 kg will require what pressure?
Pressure = 7000 x 9,8 N ÷ 14,5 cm2 = 4731,0 N/cm2 = 473 bar.
Force
(Load) Example 3
Plunger Stroke An RC-256 cylinder is required to produce a force of 190.000 N. What
pressure is required?
Pressure = 190.000 N ÷ 33,2 cm2 = 5722,9 N/cm2 = 572 bar.
Effective
Area
Example 4
Four RC-308 cylinders are required to produce a force of 800.000 N.
What pressure is required?
Pressure = 800.000 N ÷ (4 x 42,1 cm2) = 4750,6 N/cm2 = 476 bar.
Remember, since four cylinders are used together, the area for one
Hydraulic Cylinder cylinder must be multiplied by the number of cylinders used.
Force = Working x Effective
Pressure Area Example 5
A CLL-2506 cylinder is going to be used with a power source that is
capable of 500 bar. What is the theoretical force available from that
F = P x A cylinder?
Force = 5000 N/cm2 x 366,4 cm2 = 1.832.000 N = 1832 kN.
Use this formula to determine

either force, pressure or
effective area if two of the
variables are known.
Cylinder Oil The volume of oil required Example 1:

Stroke
Capacity for a cylinder (cylinder oil An RC-158 cylinder with 20,3 cm2 effective area
capacity) is equal to the and 200 mm stroke requires what volume of oil?
effective area of the cylinder Oil Capacity = 20,3 cm2 x 20 cm = 406 cm3
times the stroke*. Oil
Example 2: Capacity
An RC-5013 cylinder has an effective area of
71,2 cm2 and a stroke of 320 mm. How much oil will be required?
Oil Capacity = 71,2 cm2 x 32 cm = 2278,4 cm3
Example 3:
Cylinder Cylinder An RC-10010 cylinder has an effective area of 133,3 cm2 and a
Cylinder
Oil = Effective x Stroke
stroke of 260 mm. How much oil will it require?
Capacity Area Oil Capacity = 133,3 cm2 x 26 cm = 3466 cm3
Example 4:
Four RC-308 cylinders are being used, each with an effective area of
42,1 cm2 and a stroke of 209 mm. How much oil will be required?
Oil Capacity = 42,1 cm2 x 20,9 cm = 880 cm3 for one cylinder
Multiply by four to obtain the required capacity: 3520 cm3
* Note: these are theoretical CAUTION!

examples and do not take into Enerpac oil will compress
account the compressibility of 2,28% at 350 bar and
oil under high pressure. 4,1% at 700 bar.
Page: 124
www.enerpac.com 115
Conversion Tables Hydraulic Technology Worldwide
Key to cylinder dimensions A = Collapsed height M = Mounting holes to

B = Extended height plunger centre
Dimensions shown in the C = Cylinder body length N = Length of smaller
Selection Charts of the D = Cylinder outside cylinder part
cylinder section are identified diameter O = Plunger hole or thread
on the relevant drawings by D1 = Cylinder width of saddle
the capital letter references E = Cylinder inside P = Plunger thread length
listed here: A for collapsed diameter Q = Plunger outside thread
height through Z1 for depth of F = Plunger rod diameter U = Bolt circle diameter of
internal base thread. G = Oil inlet thread mounting holes
H = Cylinder bottom to V = Thread of cylinder
W
advance port mounting holes
J I = Cylinder top to retract W = Collar thread
O port X = Collar thread length
J = Saddle outside Y = Centre hole diameter
P
diameter Z = Internal base thread
K
F K = Cylinder rod protrusion Z1 = Depth of internal base
at collapsed height thread
I X L = Plunger centre to side
B of base
G E A
C
Z
H
N
W
M
YU D
Key to measurements
Pressure: Imperial to metric
All capacities and 1 psi = 0,069 bar Temperature: Inches Decimal mm
measurements in the catalog 1 bar = 14,50 psi To Convert °C to °F: 1/16 .06 1,59
are expressed in uniform = 9,8 N/cm2 T°F = (T°C x 1,8) + 32 1/8 .13 3,18
values. = 100.000 Pa To Convert °F to °C: 3/16 .19 4,76
The conversion chart 1 kPa = 0,145 psi T°C = (T°F – 32) ÷ 1,8 1/4 .25 6,35
provides helpful information 5/16 .31 7,94
for their translation into 3/8 .38 9,53
Volume: Other measurements:
equivalent systems. 7/16 .44 11,11
1 in3 = 16,387 cm3 1 in = 25,4 mm 1/2 .50 12,70
1 cm3 = 0,061 in3 1 mm = 0,039 in 9/16
All ton values specified in this .56 14,29
1 litre = 61,02 in3 1 in2 = 6,452 cm2 5/8
catalogue are metric tonnes .63 15,88
= 0,264 gal 1 cm2 = 0,155 in2 11/16
and are for cylinder class .69 17,46
1 USgal = 3785 cm3 1 hp = 0,746 kW 3/4
identification only. .75 19,05
= 3,785 l 1 kW = 1,359 hp 13/16
Please refer to the kN data .81 20,64
= 231 in3 1 Nm = 0,73756 Ft.lbs 7/8
for calculations. .88 22,23
1 Ft.lbs = 1,355818 Nm 15/16 .94 23,81
Weight: 1 kN = 225 lbs 1
Free Conversion Calculator 1.00 25,40
1 pound (lb) = 0,4536 kg
Visit enerpac.com and
1 kg = 2,205 lbs
download the free
1 metric ton = 2205 lbs
conversion calculator.
= 1000 kg
1 ton (short) = 2000 lbs
= 907,18 kg
116
Cylinder Speed Charts
Cylinder Speed To determine: To determine:
This chart will help you Cylinder plunger speed Best matching pump
calculate the time required for An RC-256 cylinder (25 ton) is powered by a ZE3- Your 25 ton cylinder needs to move a load at a
an Enerpac cylinder to lift a Series two stage pump. While lifting the load, the speed of 3,0 mm per second. Simply go down from
load when powered by a 700 cylinder plunger travels at 3,0 mm per second. the top of the chart, to the value of 3,0 mm per
bar Enerpac hydraulic pump. While extending towards the load, the cylinder second. Follow the chart to the right to find that the
The Cylinder Speed Chart can 30 ton 50 ton 75 ton 100 ton plunger travels at 30 ton 50 ton 75 ton 100 ton ZE3-Series pump
No pe No pe
Pump Serie/Ty Pump Serie/Ty
also be used to determine the No
Load Load
No
Load Load
No
Load
14,4
Load Load
1,3 ZU4-Serie
30,9 mm per
Load
No
Load Load
No
Load Load
No
Load
14,4
Load Load
1,3 ZU4-Serie
Load
is most suitable for
2,3 18,7 1,6 stage 2,3 18,7 1,6 stage
45,5 4,0 26,9 0,7 ZE3 one 45,5 4,0 26,9 0,7 ZE3 one
pump type and model best 2,3 2,2 1,4
1,3 1,0 0,9 0,7
7,7 0,7 ZE3 two
stage second. 2,3 2,2 1,4
1,3 1,0 0,9 0,7
7,7 0,7 ZE3 two
stage your application.
1,3 10,0 0,9 stage 1,3 10,0 0,9 stage
suited for an application when 8 24,3 2,2
3,4 3,2
14,4
2,0 1,9 1,4 1,3 1,1 1,0 ZE4 one
ZE4 two stage
8 24,3 2,2
3,4 3,2
14,4
2,0 1,9 1,4 1,3 1,1 1,0 ZE4 one
ZE4 two stage
14,4 1,3 11,1 1,0 14,4 1,3 11,1 1,0
you know the plunger speed 1 35,2 3,2
20,8 1,9
2,2 2,1 ZE5 one stage 1 35,2 3,2
20,8 1,9
2,2 2,1 ZE5 one stage
2,8 2,7 2,8 2,7
2 6,9 6,5
4,1 3,8 ZE5 two stage 2 6,9 6,5
4,1 3,8 ZE5 two stage
18,9 2,7 14,5 2,1 18,9 2,7 14,5 2,1
required. 2 46,0 6,5
27,2 3,8
9 44 38 3,4 ZE6 one
stage
2 46,0 6,5
27,2 3,8
9 44 38 3,4 ZE6 one
stage
Millimetres of Cylinder Plunger Travel per Hand Pump Plunger Stroke

Cyl. Capacity 5 ton 10 ton 15 ton 25 ton 30 ton 50 ton 75 ton 100 ton
Power No No No No No No No No
Source Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Pump Type Page
Manual 3,9 3,9 1,7 1,7 1,2 1,2 0,7 0,7 0,6 0,6 0,3 0,3 0,2 0,2 0,2 0,2 P-391 68
17,6 3,9 7,8 1,7 5,5 1,2 3,4 0,7 2,6 0,6 1,6 0,3 1,0 0,2 0,8 0,2 P-392 68
25,3 3,8 11,2 1,7 7,9 1,2 4,9 0,7 3,7 0,6 2,3 0,3 1,5 0,2 1,1 0,2 P-80/801/84 70
61,4 3,9 27,1 1,7 19,3 1,2 11,8 0,7 9,0 0,6 5,5 0,3 3,5 0,2 2,8 0,2 P-802/842 70
197 7,4 87,1 3,3 61,8 2,3 37,9 1,4 29,0 1,1 17,7 0,7 11,4 0,4 8,8 0,3 P-462/464 70
Millimetres per Second of Cylinder Plunger Travel

Cyl. Capacity 5 ton 10 ton 15 ton 25 ton 30 ton 50 ton 75 ton 100 ton
Power No No No No No No No No
Source Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Pump Serie/Type Page
Electric 86 8,3 38 3,7 27 2,6 17 1,6 13 1,3 7,7 0,7 5,4 0,5 4,1 0,4 PU Economy 78
(speed based 53 7,1 24 3,2 17 2,2 10 1,4 8,1 1,1 4,8 0,6 3,3 0,4 2,6 0,3 PE Submerged 80
on 50 Hz)
295 25,6 132 11,5 94,4 8,2 57,7 5,0 45,5 4,0 26,9 2,3 18,7 1,6 14,4 1,3 ZU4-Series 84, 86
15,1 14,1 6,8 6,3 4,8 4,5 3,0 2,8 2,3 2,2 1,4 1,3 1,0 0,9 0,7 0,7 ZE3 one stage 84, 90
158 14,1 70,7 6,3 50,5 4,5 30,9 2,8 24,3 2,2 14,4 1,3 10,0 0,9 7,7 0,7 ZE3 two stage 84, 90
22,3 21,0 10,0 9,4 7,1 6,7 4,4 4,1 3,4 3,2 2,0 1,9 1,4 1,3 1,1 1,0 ZE4 one stage 84, 90
228 21,0 102 9,4 72,9 6,7 44,6 4,1 35,2 3,2 20,8 1,9 14,4 1,3 11,1 1,0 ZE4 two stage 84, 90
44,9 42,1 20,1 18,9 14,4 13,5 8,8 8,2 6,9 6,5 4,1 3,8 2,8 2,7 2,2 2,1 ZE5 one stage 84, 90
298 42,1 133 18,9 95,3 13,5 58,3 8,2 46,0 6,5 27,2 3,8 18,9 2,7 14,5 2,1 ZE5 two stage 84, 90
76,9 70,0 34,5 31,4 24,6 22,4 15,1 13,7 11,9 10,8 7,0 6,4 4,9 4,4 3,8 3,4 ZE6 one stage 84, 90
315 70,0 141 31,4 101 22,4 61,7 13,7 48,7 10,8 28,8 6,4 20,0 4,4 15,4 3,4 ZE6 two stage 84, 90
Use the formula below to calculate cylinder plunger speed PP 8000/9000 96
Air 25,9 4,2 11,6 1,9 8,2 1,3 5,0 0,8 4,0 0,6 2,3 0,4 1,6 0,3 1,3 0,2 Turbo II Air 98
(at 6,9 bar air 17 3,4 7,6 1,5 5,4 1,1 3,3 0,7 2,6 0,5 1,5 0,3 1,1 0,2 0,8 0,2 PA-Series 100
pressure)
277 3,8 123 1,7 88 1,2 53 0,7 42 0,6 25 0,3 17 0,2 13,0 0,2 PAM-Series 101
Petrol 85 17 38 7,6 27 5,4 16 3,3 13 2,6 7,7 1,5 5,3 1,1 4,1 0,8 PGM-20 Atlas 104
205 23 91 10 65 7,4 39 4,5 31 3,6 18 2,1 13 1,5 9,8 1,1 PGM-30 Atlas 104
205 43 91 19 65 13 39 8,2 31 6,5 18 3,8 13 2,7 9,8 2,0 PGM-50 Atlas 104
No Load indicates the plunger Load indicates the plunger speed Example: At what speed (V) will the RC-256 (25 ton) cylinder move
speed as the plunger extends as the load is lifted at a system when powered by a ZE3-Series pump?
towards the load (1st stage). pressure of 700 bar (2nd stage).
RC-256 Cylinder Effective Area = 33,2 cm2
ZE3-Series pump oil Flow (no load) = 6150 cm3/min
Cylinder Pump Oil Flow (cm3/min) x 10
Plunger Speed = 6150 cm3/min x 10
2
Speed V = = 30,9 mm/sec
(mm/sec) Cylinder Effective Area (cm ) x 60 33,2 x 60
www.enerpac.com 117
Valve Information Hydraulic Technology Worldwide
Ways
The (oil) ports on a valve. Directional 3-Way Valves 4-Way Valves
A 3-way valve has 3 ports: Control are used with single-acting are used with double-acting
pressure (P), tank (T), and cylinder (A). Valves cylinders cylinders
A 4-way valve has 4 ports:
pressure (P), tank (T), advance (A) and

Q

@
;
retract (B).
Single-Acting cylinders require at least

Q

@
;
Q

@
;
a 3-way valve, and can, under certain
instances, be operated with a 4-way valve.
Double-Acting cylinders require a 4-way

valve, providing control of the flow to each Valves may Pump Mounted Remote Mounted
cylinder port. be either
pump
mounted or
Positions remote
The number of control points a valve can mounted.
;@Q
Q

@
;
provide. A 2-position valve has the ability to
control only the advance or retraction of the Valves may Manually Operated Solenoid Operated
cylinder. To be able to control the cylinder be either
with a hold position, the valve requires a manually or
3rd position. solenoid
operated.
Centre Configuration
The centre position of a valve is the position ;@Q Q;@
Q;@
at which there is no movement required of
the hydraulic component, whether a tool or
cylinder. Advance Single-acting cylinder Double-acting cylinder
A
Hold Controlled by a 3-way, Controlled by a 4-way,
The most common is the
Retract 3-position valve. 3-position valve.
Tandem Centre. This
P T
configuration provides for
little to no movement of the cylinder and the A Advance A Advance
unloading of the pump. This provides for The oil flows P T The oil flows
P
minimum heat build-up. from the pump from the pump
AB pressure port B pressure port
The next most common P to the P to the
is the Closed Centre cylinder port A: the cylinder cylinder port A and from
P T
configuration, which is used plunger will extend. cylinder port B to tank T.
mostly for independent control of multi-
cylinder applications. This configuration
again provides for little to no movement of A Hold A Hold
the cylinder, but also dead-heads the P T The oil flows P T The oil flows
pump, isolating it from the circuit. from the pump from the pump
Use of this type of valve may require some pressure port B pressure port P
means of unloading the pump to prevent P to the tank to the tank T.
heat build-up. T. The cylinder port A is The cylinder ports A and B are
closed: the cylinder plunger closed: the cylinder plunger
There are many more type of valves, such will maintain its position. will maintain position.
as Open Centre and Float Centre.
These valves are used mostly in complex
hydraulic circuits and require other special A Retract A Retract
considerations. The oil flows P T The oil flows
P T
AB AB from the from the pump
pump and B pressure port
P T P T cylinder port A P to cylinder
Open Float to the tank T: the cylinder port B and from cylinder port
Centre Centre plunger will retract. A to tank T: the cylinder
plunger will retract.
118 © Enerpac www.enerpac.com

System Components Section Overview
Component Type Series Page
ENERPAC System Components:

Hoses H-700 120
All the additional elements you need to
E
complete your high pressure hydraulic

system and get started. Couplers C, A 122
F, T
D
Engineered to work with your Enerpac
F
cylinders, pumps and tools, all Enerpac Hydraulic Oil HF 124

C
components are designed to the most C
B
exacting standards. Manifolds A 124
x)
With this complete line of hydraulic

(6
8N B
PT
hoses, couplers, fittings, manifolds, oil Split-flow AM 124

and gauges, Enerpac has the accessories Manifolds
-1
8"
to complement your system and ensure

3/
Fittings BFZ 125

the efficient operation, long life and
FZ
safety of your hydraulic equipment.
Hydraulic Force & GF 126
Pressure Gauges GP
Hydraulic Pressure G 128

Gauges H
Test System T 130

Gauges
Digital Pressure DGR 131

Gauge
Gauge GA, 132

Accessories NV, V
119
700-Series, High Pressure Hoses Hydraulic Technology Worldwide
Shown from top to bottom: HA-7206B, HC-7206, H-7206
Safety and Quality
To ensure the integrity of your

system, specify only Enerpac
hydraulic hoses.
WARNING !
• Do not exceed 700 bar maximum
pressure.
• Do not handle hoses which are
under pressure.
More safety instructions in our ‘Yellow

pages’.
Page: 108
Hose End Couplings
1
Thermo-Plastic Safety Hoses (700-Series) /4" NPTF
• For demanding applications, featuring a 4:1 design factor

• Maximum working pressure of 700 bar
• Four layer design, including two high strength steel wire 3
/8" NPTF
braids
• Outside jacket is polyurethane, to provide maximum
abrasion resistance
A-604
• Exhibits low volumetric expansion under pressure to
enhance overall system efficiency
• Crimped-on rubber strain relief for improved life and
durability on all models A-630
To prevent back pressure and to increase cylinder retraction speed, when using long
hoses with single-acting cylinders, the Enerpac HC-7300-Series of hoses with
increased internal diameter is the best choice. AH-604
AH-630
C-604
CH-604
120
High Pressure Hydraulic Hoses
700
Series
Inside Diameter:
6,4 and 9,7 mm
Internal Hose End Hose Model Length:
Diameter Assemblies and Couplers* Length Number 0,6 - 15 m
End one End two Maximum Operating Pressure:
(mm) (m) (kg)
– 700 bar
–
1 4"
/ NPTF A-630 1,8 HB-7206QB 1,1
–
CH-604 1,8 HC-7206Q 1,0
0,6 H-7202 0,5
Torque Wrench Hoses
0,9 H-7203 0,7
1,8 H-7206 0,9 Use Enerpac THC and THQ-
3
Series twin safety hoses with
/8" NPTF 3,0 H-7210 1,4
double-acting wrenches to
6,1 H-7220 2,8 ensure the integrity of your
9,1 H-7230 4,5 hydraulic system.
15 H-7250 7,0
–
Page: 206
A-604 1,8 HA-7206B 1,1
6,4 –
– Fittings
3
/8" NPTF For additional fittings see
–
AH-604 the fitting page of the
1,8 HA-7206 1,0
System Components
3,0 HA-7210 1,5 section.
AH-630 1,8 HB-7206 1,0
0,9 HC-7203B 1,0
C-604 1,8 HC-7206B 1,3 Page: 125
3,0 HC-7210B 1,8
0,9 HC-7203 0,8
1,8 HC-7206 1,0
CH-604
3,0 HC-7210 1,5 Hose Oil Capacity
6,1 HC-7220 2,9
When using greater hose lengths,
1,8 HC-7206C 1,1 it is sometimes necessary to fill the
CH-604 CH-604
15 HC-7250C 7,0 pump reservoir after filling the hoses.
1,8 H-7306 1,6 To determine the hose oil capacity, use
– the following:
3,0 H-7310 2,4
3/8" NPTF For 6,4 mm inside diameter hoses:
6,1 H-7320 4,5 Capacity (cm3) = 32,1699 x Length (m)
9,7 3 8"
/ NPTF 9,1 H-7330 7,3
15 H-7350 11,5 For 9,7 mm inside diameter hoses:
1,8 HC-7306 1,7 Capacity (cm3) = 73,8981 x Length (m)
CH-604 3,0 HC-7310 2,5
6,1 HC-7320 5,1
* For technical information on couplers see next page.
www.enerpac.com 121
A, C, F, T-Series, Hydraulic Couplers Hydraulic Technology Worldwide
Shown: FH-604, FR-400, AR-630, C-604, AH-604, AR-400
Quick Connection of
Hydraulic Lines
Thread sealer
To seal NPTF threads use one
of the new anaerobic thread
sealers or Teflon paste.
When using Teflon Tape,
apply the tape one thread from the end
of a fitting to prevent it from winding up
in the hydraulic system.
3
/8" High Flow Couplers WARNING!
• Standard equipment on most Enerpac cylinders Couplers should be
• Recommended for use on all Enerpac pumps and cylinders where pressurized only when
space and porting permits completely connected and
should not be coupled or uncoupled
• Includes “2-in-1” dust cap for use on male and female coupler
when pressurized.
halves
More safety instructions in our
3/8" High Pressure ‘Flush-face’ Couplers ‘Yellow Pages’.
• Featuring “Push-to-connect” operation, to guarantee good Page: 108
connection every time
• Flush-face, zero-leak operation for minimal spillage
• HTMA* recognized for safety and performance
• Will not interchange with low pressure couplers
3
/8" Regular Spee-D-Coupler®
• For medium duty applications with hand pumps
• Includes female aluminium dust cap With the use of Enerpac High Flow Couplers,
hoses are easily installed for multiple hydraulic
1
line connections in this 34 points PLC-
/4" Regular Coupler controlled lifting system.
• For use with small cylinders and hand pumps
• Includes female aluminium dust cap
1
/4" Spin-on Torque Wrench Couplers
• Use with 700 bar S and W-series torque wrenches, THQ-series
hoses and torque wrench pumps with suffix “Q”
1
/4" Lock-ring Torque Wrench Couplers (dustcaps included)
• Use with 800 bar SQD and HXD-series torque wrenches,
THC-series hoses and torque wrench pumps
* Hydraulic Tool Manufacturers Association
122
Hydraulic Couplers
A
B A/C
E C D C F/T
C-604 F G Series
A
B
E C D C
Maximum Flow Capacity:
F G
F-604
A
6,1 - 40,0 l/min
B Thread:
1
E C D C /4" and 3/8" NPTF
F
A-604
A-630
A
700 and 800 bar
B
Metal Dust Caps
E C D C Steel dust caps are available
for the C-604 series couplers.
T-630 F G Order model number:
A
CD-411M for female half
B
CD-415M for male half
E C D C
CFM-250 F CFF-250 G
Maximum Coupler Type Model Numbers Dimensions (mm) Dust

Flow Cap(s)
Capacity Complete Female Male A* B C D E F G
(l/min) Set Half Half
700 bar High-Flow Coupler
35 C-604 CR-400 CH-604 83 64 / "
3 8 35 36 32 25 (2x)
NPTF CD-411
700 bar Flush-Face coupler

40 F-604 FR-400 FH-604 110 72 / "
3 8
31 31 26 28 –
NPTF
700 bar Regular Spee-D-Coupler©

7,6 A-604 AR-400 AH-604 77 42 / "
3 8
28 26 23 19 Z-410
NPTF female
only
700 bar Regular Coupler

7,6 A-630 AR-630 AH-630 66 35 / "
1 4
22 20 19 15 Z-640
NPTF female
only
700 bar Spin-on Coupler

11,4 T-630 TR-630 TH-630 73 60 / "
1 4
29 29 19 21 –
NPTF
800 bar Lock-ring Coupler

6,1 – CFF-250 CFM-250 76 58 / "
1 4
23 28 24 22 –
NPTF
* Value A is total length when male and female half are connected.
www.enerpac.com 123
Hydraulic Oil, Manifolds and Fittings Hydraulic Technology Worldwide
Shown : A-65, FZ-1625, HF-95Y, FZ-1634, FZ-1607, A-64, AM-21
The Genuine Range
Hydraulic Oil
Contents Model Use only genuine
Number Enerpac Hydraulic Oil.
The use of any other
1 litre HF-95 X fluid will render your
5 litres HF-95 Y Enerpac warranty null
and void.
60 litres HF-95 Z
Oil Specifications chart
Viscosity Index 100 min
Viscosity at 210°F 42/45 S.U.S.
Viscosity at 100°F 150/165 S.U.S.
Viscosity at 0°F <12,000 S.U.S.
• Maximum pump • Additives prevent rust, API Gravity 31.0/33.0
volumetric efficiency oxidation and sludge Flash, C.O.C.°F 400
• Maximum internal heat • High viscosity index Pour Point, °F -25
transfer • Maximum film protective Aniline Point, °F 210/220
• Prevents pump cavitation lubricity Paraffinic Base Colour Blue
Manifolds
Description Model Dimensions (mm)
Number
178 mm Long Manifold with A-64 3/8"- 76 50 3/8"- 203 83

18NPTF (7x) 6,3 89 18NPTF (7x) 6,3 184
7 female ports
369 mm Long Manifold that A-65 32 32
allows direct mounting of 32 38 38 38 32 32 102 102 102 32
control valves to the manifold. 178 369
Plugs .38 NPTF. A-64 A-65
6-Port Hexagon Manifold. A-66 41
21 50
Plugs furnished for all ports
3/8"-18 NPTF.
6
58
38
1/4"-20UNC
3/8"-18NPTF (6x)
Premounted Manifolds 63 63
AM-21
ø7,1 ø7,1
Split-flow valve to control two 76 76
98-106
98-106
12,7 12,7
or four single-acting cylinders
simultaneously.
12,7
25,4
12,7
25,4
AM-41
AM-21 with 5 ports 3/8" NPTF. 12,7 127 12,7 297,4
AM-41 with 7 ports 3/8" NPTF. AM-21 41 152 AM-41 41 304,8
124
Hydraulic Oil, Manifolds and Fittings
Recommended Tubing
Enerpac does not supply high-pressure pipe or tubing, but recommends the use A, AM
of cold drawn steel tubing in stead of regular pipe in the following dimensions:
In stead of .25" pipe, use 13 mm O.D. x 11 ga. (3 mm) wall. BFZ
In stead of .38" pipe, use 9 mm Schedule 80 seamless pipe.
In steadof .50" pipe, use 21 mm O.D. x .4 mm wall.
FZ
This tubing can be threaded with standard pipe threading dies. HF
Series
Fittings 700 bar Model Number Dimensions (mm)
Street Elbow A B C D B
From: 3/8”-NPTF Male FZ-1616 23 33 3 8
/ ”-18 NPTF 3 8
/ ”-18 NPTF
3/ D
To: 8”-NPTF Female
A
C
Reducing Connector FZ-1615 28 25 3/8”-18 NPTF 1/4”-18 NPTF
3
A
From: /8”-NPTF Female
To: 1
/4”-NPTF Female C D
1/2”-NPTF Female 47 29 1 2
/ ”-14 NPTF 3 8
/ ”-18 NPTF
From: FZ-1625
3/8”-NPTF Female
B
To:
Hexagon Nipple
From: To: A
1
1
/4”-NPTF 1/4”-NPTF
FZ-1608 38 16 1
/4”-18 NPTF /4”-18 NPTF
C D
51 19 3
3
FZ-1619 3/8”-18 NPTF /8”-18 NPTF
B
37 19 3
3
FZ-1617 3
/8”-18 NPTF /8”-18 NPTF
Coupling A
From: To:
3 C D
3/8”-NPTF 3/8”-NPTF FZ-1614 29 23 3
/8”-18 NPTF /8”-18 NPTF
1
/4”-NPTF 1
/4”-NPTF FZ-1605 29 19 1
/4”-18 NPTF 1/4”-18 NPTF B
Cross FZ-1613 45 25 3 /8”-18NPTF – C
3 8
From: / ”-NPTF Female
3/8 B C
To: ”-NPTF Female
A
Tee C
From: To:
3
/8”-NPTF 3
/8”-NPTF FZ-1612 45 25 3
/8”-18 NPTF –
B C
1
/4”-NPTF 1
/4”-NPTF FZ-1637 45 24 1 4
/ ”-18 NPTF –
A
3/8”-NPTF 3/8”-NPTF
BFZ-16312 57 3
/8”-18 NPTF 3/8”-18 NPTF –
Elbow A
From: To:
C
3
/8”-NPTF 3
/8”-NPTF FZ-1610 33 20 3
/8”-18 NPTF – B
1
/4”-NPTF 1
/4”-NPTF 36 24 – C
FZ-1638 1/4”-18 NPTF
Reducer
A
From: To:
19 19 1 3 8
/ ”-18 NPTF
3
/8”-NPTF 1
/4”-NPTF FZ-1630 /4”-18 NPTF C D
28 22 1 1 2
/ ”-14 NPTF
1
/4”-NPTF 1
/2”-NPTF BFZ-1630 /4”-18 NPTF
3/8”-18 NPTF
B
3
/8”-NPTF G1/4” BFZ-16301 19 19 G 1/4”
Adaptor
From: To: A
G 1/4” 1
/4”-NPTF BFZ-16411 35 19 1
/4”-18 NPTF G 1/4”
BFZ-16421 C D
G 1/4” 1/
8”-NPTF 31 19 1/
8”-27 NPTF G 1/4”
G 3/8” 1
/4”-NPTF BFZ-16323 43 24 1
/4”-18 NPTF G 3/8” B
G 3/8” 3/8”-NPTF BFZ-16324 43 24 3/8”-18 NPTF G 3/8”
Adaptor
From: To: A
1
/4”-NPTF 3
/8”-NPTF FZ-1055 44 23 1
/4”-18 NPTF 3
/8”-18 NPTF
1/4”-NPTF 1/8”-NPTF FZ-1642 1/8”-27 NPTF 1/4”-18 NPTF C D
30 19
1/2”-NPTF 3/8”-NPTF FZ-1634 42 28 3/8”-18 NPTF 1/2”-14 NPTF B
www.enerpac.com 125
Hydraulic Force & Pressure Gauges Hydraulic Technology Worldwide
Shown from left to right: GP-230B, GF-835B, GP-10S
Visual Reference for

System Pressure
and Force
Auto-Damper Valve V-10
For automatic control of
gauge fluctuations, the V-10
Auto-Damper Valve controls
the movement of the gauge
needle by restricting oil flow in and out
of the gauge. No adjustments needed.
Page: 139
Snubber Valve V-91

Infinitely adjustable for
metering oil out of a gauge.
The V-91 Snubber Valve is
also suitable as a shut-off
valve to protect the gauge during high
• GF-series gauges: calibrated with dual scale reading for cycle applications.
pressure and force in bar and kN
• GF-series gauges: all pressure sensing parts are sealed Page: 139
and dampened by glycerine for long life
• GP-series gauges: calibrated with dual scale reading for
pressure in bar and psi
• Excellent readability: gauge face dimensions 100 mm
• Fast, easy installation
• Stainless steel gauge cases for corrosion resistance
A GP-10S gauge is used on this press to check the hydraulic pressure Used With
required to bend flat steel bar. All Cylinders
All Cylinders
All 5 ton Cylinders
All 10 ton Cylinders
All 25 ton RC-Cylinders
All 50 ton Cylinders
13 ton RCH-Series
RCS-201, 302
RCS-502, 1002
RCH-202, 302, 603
All 25, 30, 50 ton cylinders
All 75, 100 ton cylinders
All 150, 200 ton cylinders
10 ton VLP Presses
25 ton VLP Presses
50 ton VLP, BPR Presses
126
Hydraulic Force & Pressure Gauges
Maximum Indicator Pointer GF
Indicator retains peak
readings of pressure or force GP
generated by the system. Series
Order model nr: BSA-881.
Can easily be installed on GP-Series dry

gauges.
Pressure Range:
0 - 1000 bar
Force Range:
Pressure Gauges
0 - 2000 kN
To measure the input pressure Gauge Face Diameter:
into cylinders or high pressure
systems. Also for all testing
100 mm
applications. Accuracy, % of full scale:
Load Gauges
± 1%
To measure external load supported by 100 50 100 47
a cylinder or jack in kN. For pressing
parts together under pre-determined
loads, weighing, testing, etc.
GP-Series are dry gauges.

GF-Series are glycerine filled gauges.
G G
GP-serie GF-serie
Gauge Type and Calibration Units per Division Model Thread Gauge Adaptor
Number* G
132
Required
bar psi bar kN GA-1 GA-2 GA-3
0-700 0-10.000 – – 10 bar, 100 psi GP-10S 12
/ " NPTF • •
0-1000 0-15.000 – – 10 bar, 200 psi GP-15S 12
/ " NPTF • •
– – 0-700 0-45 10 bar, 0,5 kN GF-5B 1/2" NPTF
• •
– – 0-700 0-100 10 bar, 1 kN GF-10B 1/2" NPTF
• •
– – 0-700 0-232 10 bar, 2 kN GF-20B 1/2" NPTF
• •
– – 0-700 0-500 10 bar, 5 kN GF-50B 1/2" NPTF
• •
– – 0-700 0-124 10 bar, 1 kN GF-120B 1/2" NPTF
• •
– – 0-700 0-175/275 10 bar, 2 + 5 kN GF-230B 1/2" NPTF
• •
– – 0-700 0-450/900 10 bar, 5 + 10 kN GF-510B 1/2" NPTF
• •
– – 0-700 0-210/320/570 10 bar, 5 kN GF-813B 1/4" NPTF
•
– – 0-700 0-232/300/500 10 bar, 5 kN GF-835B 1/4" NPTF
•
– – 0-700 0-720/930 10 bar, 10 kN GF-871B 1/4" NPTF
•
– – 0-700 0-1400/2000 10 bar, 25 kN GF-200B 1/4" NPTF
•
– – 0-700 0-100 10 bar, 1 kN GF-10B 1/2" NPTF
• •
– – 0-700 0-232 10 bar, 2 kN GF-20B 1/2" NPTF
• •
– – 0-700 0-500 10 bar, 5 kN GF-50B 1/2" NPTF
• •
– – 0-700 0-720/930 10 bar, 10 kN GF-871B 1/4" NPTF
•
– – 0-700 0-1400/2000 10 bar, 25 kN GF-200B 1/4" NPTF
•
* GF-Series Force gauges with imperial scale reading (psi, lbs) are available by changing the suffix ‘B’ into ‘P’.
www.enerpac.com 127
G, H-Series, Hydraulic Pressure Gauges Hydraulic Technology Worldwide
Shown from left to right: H4049L, G-2534R, G-4089L, G-2535L, G-4040L
Visual Reference of
System Pressure
Gauge adaptor
For easy gauge installation
into almost any system,
Glycerine Filled (G-Series) line of gauge adaptors.
• Dual scale reading calibrated in bar and psi
• All pressure sensing parts sealed and dampened by glycerine Page: 132
for long life
• Includes safety blow-out disk and pressure equalizing Snubber Valve V-91
membrane Infinitely adjustable for
• Gauge snubbers or needle valves recommended for high metering oil out of a gauge.
The V-91 Snubber Valve is
cycle applications
also suitable as a shut-off
High Cycle Dry Gauges (H-Series) valve to protect the gauge during high
• Dual scale reading calibrated in bar and psi cycle applications.
• Ideal for use in many applications, specifically for high cycle

and harsh environments Page: 139
• Gauge snubbers or needle valves recommended to shut off
gauge when not in use
When lifting or pressing, always

use a gauge. A gauge is your
‘window’ to the system. It lets
you see what’s going on.
128
Hydraulic Pressure Gauges
A B B
C
G
H
D Series
C E
Dimensions (mm)
Pressure Range:
Size Connection A B C D E
63 Lower Mount 63 37 1
/4" NPTF 84 –
0-1000 bar/15.000 psi
63 Center Rear 63 37 1 " – 63 Face Diameter:
/4 NPTF
100 Lower Mount 100 29 1 "
/4 NPTF
1 "
121 – 63-100 mm
100 Lower Mount 100 49 /2 NPTF 136 –
Accuracy, % of full scale:
Note: dimensions for reference only.
±1,0 - 1,5%
Maximum Indicating
Pointer
Indicator retains peak
readings of pressure or force
generated by the system.
Order model number: BSA-881.
Note: For use on H-Series of gauges only.
SELECTION CHART
Gauge Pressure Range Model Number Major Minor Major Minor

Series ø 63 ø 63 ø 100 ø 100 Graduation Graduation Graduation Graduation
1 1 1 1
/4 NPTF /4 NPTF /4 NPTF /2 NPTF
Lower Center Lower Lower
Mount Rear Mount Mount bar psi
(bar) (psi) Accuracy: ± 1,5 % Accuracy: ± 1,0 % ø 63 ø 100 ø 63 ø 100 ø 63 ø 100 ø 63 ø 100
G-Series 0-7 0-100 G2509L – – – 1 – 0,01 – 10 – 2 –
0-11 0-160 G2510L – – – 1 – 0,02 – 10 – 2 –
0-14 0-200 G2511L – – – 1 – 0,02 – 50 – 5 –
0-20 0-300 G2512L – – – 5 – 0,50 – 50 – 5 –
0-40 0-600 G2513L – – – 10 – 1 – 100 – 10 –
0-70 0-1.000 G2514L G2531R – – 10 – 1 – 100 – 20 –
0-140 0-2.000 G2515L – – – 10 – 2 – 500 – 50 –
0-200 0-3.000 G2516L – – – 50 – 5 – 500 – 50 –
0-400 0-6.000 G2517L G2534R – – 100 – 10 – 1000 – 100 –
0-700 0-10.000 G2535L G2537R G4088L G4039L 100 100 10 10 2000 1000 200 100
0-1000 0-15.000 G2536L G2538R G4089L G4040L 100 100 20 20 3000 3000 200 200
H-Series 0-700 0-10.000 – – H4049L H4071L – 100 – 10 – 1000 – 100
www.enerpac.com 129
Test System Gauges Hydraulic Technology Worldwide
Gauge shown: T-6003L

T
Series
Pressure Range:
0 - 3500 bar
Face Diameter:
152 mm
±0,5 - 1,5%
Cone Mount Gauge
Adaptor
Contains fittings to connect
0,25" cone fitting gauge to
0,38" cone system. Kit
includes 43-301 tee and 43-704 gauge
adaptor. Order model number: 83-011.
Page: 77
Cone Mount Gauge

• Dual scale reading calibrated in bar and psi Connector
• All gauges have spring-loaded backs with rubber blow-out For connecting gauges with
plugs to protect case assembly in case of over- 0,25" cone fitting directly to
pressurization model number 11-100 or
11-400 pump (page 76). May be used
• Integral maximum indicator pointer standard included with other 0,25" cone systems
• 2800 and 3500 bar models include flange mounting Order model number: 43-704
• 1/2" NPTF versions are made of high strength alloy steel

• 0,25" cone models are made of 316 stainless steel, with 162 49 162 65
403 stainless steel on 2800 and 3500 bar models

198
198
T-6001L
T-6002L 1/2"-14NPTF T-6003L 1/2"-14NPTF
An Enerpac P-2282 hand pump equipped with a T-6011L
test system gauge is used for proof pressure testing of 162 65
192 67
hydraulic valves.
236
215
T-6007L T-6010L
26 22
T-6008L T-6011L
Pressure Pressure Model Number Number Gradu- Number Gradu-

Range Range Intervals ation Intervals ation
Alloy Stainless Inter- Inter-
Steel Steel vals vals
1
(bar) (psi) /2 NPTF 0,25" Cone (bar) (bar) (psi) (psi)
0-70 1) 0-1000 T-6001L – 10 1 100 10
0-350 1) 0-5000 T-6002L – 50 5 500 50
0-700 1) 0-10.000 T-6003L T-6007L 100 10 1.000 100
0-1400 1) 0-20.000 – T-6008L 200 20 1.000 100
0-2800 2) 0-40.000 – T-6010L 500 20 5.000 200
0-3500 2) 0-50.000 – T-6011L 500 50 5.000 200
1) Acccuracy ± 0,5%
2) Acccuracy ± 1,5%
130
Digital Hydraulic Pressure Gauges
Shown: DGR-1
DGR
Series
Pressure Range:
0 -1000 bar
Voltage:
3 Volt (battery)
± 0,2%
Gauge adaptor
• Two modes
For easy gauge installation
- Automatic shut off (15 min)
into almost any system,
- Continuous display Enerpac offers a complete
• Zero reset - ensures that gauge reads actual system pressure line of gauge adaptors.
• Maximum and minimum pressure displayed
• Peak On/Off mode for 5000/second measuring mode Page: 132
• Rated for system pressure up to 1000 bar

• IP65 protection
• Displays high pressure in bar, psi, and MPa; low pressure in kPa,
MPa, hPa and mbar
• Display can be rotated 355 degrees for easy reading and use in all
positions
• 3 Volt battery included (type CR2430) with 1400 hours continuous
operation in standard mode
Greater accuracy and easier to read: enhance
76 42 your ability to monitor and control hydraulic
system pressure up to 1000 bar.
115
10
1/4"NPTF
High Pressure High Pressure Model Low Pressure Low Pressure

Rating Rating Number Rating Rating
bar MPa kPa mbar, hPa
Range Interval Range Interval Range Interval Range Interval
0-1000 0,2 0-100 0,02 DGR-1 0-20.000 200 0-20.000 200

High Pressure Rating: 0-15.000 psi, interval 3 psi. Weight: 0,23 kg.
www.enerpac.com 131
Gauge Accessories Hydraulic Technology Worldwide
Shown from left to right: GA-3, V-91, GA-1, GA-2, GA-4, NV-251, GA-918
GA/NV/V
Series
Operating Pressure:
700 bar
A gauge is easily installed into your hydraulic

system using a gauge adaptor.
Gauge Adaptors (GA-Series) C

• For easy mounting of a pressure gauge onto your system B F
• Male end screws into pump or cylinder port, female end accepts hose or
coupler, 3rd port is for gauge connection D F
• GA-918 provides for swivel connection A E
GA-1
Model Gauge Male Female Dimensions (mm)
Number Port End End B
(NPTF) (NPTF) (NPTF) A B C D E F C F
GA-1 / "
1 2 / "
3 8 71 31 / " NPTF
1 2
/ " NPTF
3 8 / " NPTF
3 8 32 D F
GA-2 1/2" 3/8" 155 35 / " NPTF
1 2 3/8" NPTF
/ " NPTF
3 8 32 A E
1/4" 3/8"
/8"
3
1/4" NPTF 3/8" NPTF 3/8" NPTF
GA-3 133 48 32 GA-2, GA-3, GA-4
1/2" 1/4" 1/2" NPTF 1/4" NPTF 3/8" NPTF
GA-4 111 35 32
Swivel Adaptor (GA-918)

• Simplifies gauge installation and reading S S1 S
Model Dimensions (mm)
Number D C E B
A B C D E S S1 A
GA-918 117 43 / " NPTF
1 2 28,5 / " NPTF
1 2 29 38
Needle Valves (V- and NV-Series) NV-251 B E

• Both NV-251 and V-91 provide positive shut-off
• 303 stainless steel stem, 16 threads/in (NV-251) A
C C F
D H
B E
Model Orifice Thread Dimensions (mm) V-91
Number (mm) Size A B C D E F H A
NV-251 4,3 / " NPTF
1 4 57 29 / " NPTF
1 4 57 46 19 19 C C F
V-91 4,8 / " NPTF
1 2 89 32 / " NPTF
1 2 64 32 37 37 D H
132
Valves Section Overview
Valve Type Series Page
ENERPAC hydraulic valves are available in 3-Way Directional VC, VM 134

a wide variety of models and configurations. Control Valves VE
Whatever your requirements… directional
4-Way Directional VC, VM 136
control, flow control, or pressure control… Control Valves VE
you can be sure that Enerpac has the correct
A
valve to match your application exactly. Pressure and Flow V 138

Control Valves
PT
L
8N
Designed and manufactured for safe

-1
8"
N
Q
3/
operation up to 700 bar, the range of Enerpac

J
K
valves allows for direct pump mounting,

remote mounting, manual or solenoid
E
actuation, and in-line installation, giving you

3.
flexible solutions to control your hydraulic 12
D
B
P
C
system.
7. ø1.
62 50
H
M
m
ax
R
.
3/
8"
-1
1.
8N
53
4. (3x)
PT
53
www.enerpac.com 133
3-Way Directional Control Valves Hydraulic Technology Worldwide
Shown from left to right: VE32D, VE33, VC-3L, VM33L, VM32
For Reliable Control

of Single-Acting
Cylinders
Valving Help
See Basic System Set-Up and
Valve Information in our ‘Yellow
Pages’
Page: 118
Valve Valve Valve Type

Operation Location
Manual Pump 3-way,

Mounted 2-position
• User adjustable relief valves on VM- and VE-Series allow

the operator to easily set the working pressure for each Manual Pump 3-way,
application Mounted 3-position,
Tandem Center
• All VM- and VE-series valves feature several gauge ports
for “system”, A and B port pressure monitoring
Manual Pump 3-way,
• All valves (except VM32, VE32D and VC-Series) include Mounted 3-position,
manifold with built-in “System Check” feature, for more Tandem Center,
precise pressure holding and improved system control Locking 1)
• VM33 has improved porting for faster cylinder retraction Manual Remote 3-way, 3-position
while pump motor is running Mounted 3) Tandem Center
• VE-Series solenoid valves include wire and connectors Manual Remote 3-way, 3-position
Mounted 3) Tandem Center,
• Manual or solenoid operation.
Locking 1)
Manual Remote 3-way, 3-position

Mounted 3) Closed Center
Manual Remote 3-way, 3-position
Mounted 3) Closed Center,
Locking 1)
Solenoid Pump 3-way,

24 VDC Mounted 2-position 2)
Solenoid Pump 3-way, 2-position

24 VDC Mounted Dump
Solenoid Pump 3-way, 3-position

A typical multi-cylinder
control set-up using
24 VDC Mounted Tandem Center
solenoid directional
control valves.
1) with pilot-operated check valve.
2) VE32 provides “HOLD” function by turning off pump
and holding pressure against system check.
134
3-Way Directional Control Valves
1/4"-18NPTF 3/8"-18NPTF 130
2
1
130
VC/VM
3/8"-
18NPTF VE
184 1)
3/8"-
144
147
18NPTF Series
38 1)
89 146 19
VM32 17 35
76 76
1/4"-20UNC (2x) 114 1) Flow Capacity:
130
VC-3, VC-3L, VC-15, VC-15L
1)
VC-3L and VC-15L only 17 l/min
184 1)
1
146
2 1/4"-18NPTF 176
73
38 1)
1
700 bar
31
GB
GP
28,5
A 31
241
1/4"- 2 3/8"-18NPTF
18NPTF GP A T
VM33, VM33L 1)
for VM33L only VE32, VE32D 3/8"-18NPTF
adjustable relief valve auxiliary ports
243
Model Hydraulic Schematic Flowpath
Number Symbol
Advance Hold Retract 1
(kg)
GB
VM32 2,5 T A
31
P A A A GP
89
P P T 2 1/4"-
T 18NPTF 3/8"-18NPTF
VE33
VM33 A A A 3,0
P
A P P T P T
T
Locking Valves
VM33L A A 4,8
P For applications requiring
A P T P T positive load holding, VM-
T
and VC-Series valves
(except VM32) are available
VC-3 3) A 2,9 with a pilot-operated check valve. This
P T A A A provides hydraulic locking of the load
VC-3L 3) A
P P T P T 4,7 until the valve is shifted into the retract
position. To order this feature, place an
“L” at the end of the model number
P T
VC-15 3) A 2,9
P T A A A
A
VC-15L 3)
P P P T 4,7
Pendants for VE-Series
Solenoid Valves
P T When ordering Enerpac VE-
VE32 P A 3,9 Series solenoid valves, the
A A A
pendant must be ordered
T separately. Pendant connection to be
P P T P
plugged into electric box of pump.
VE32D P A A A 3,9
T
P T P To be used with Pendant
VE33 A 9,2 solenoid valves: Model Nr.
A A
P
A VE32D ZCP-1
T
T P
VE32, VE33 ZCP-3
P T P
3) VC-Series remote valves include Return line kit VRL-10.
www.enerpac.com 135
4-Way Directional Control Valves Hydraulic Technology Worldwide
Shown from left to right: VM43, VE43, VC-20L
For Double-Acting
Cylinder Control
Valving Help
See Basic System Set-Up and
Valve Information in our ‘Yellow
Pages’
Page: 118
User Adjustable Relief

Valve
All VM- and VE-Series have
a user adjustable relief valve
to allow the operator to
easily set the optimum working
pressure.
• User adjustable relief valves on VM- and VE-Series allow Valve Valve Valve Type
the operator to easily set the working pressure for each Operation Location
application
• All VM- and VE-Series valves feature several gauge ports Manual Pump 4-way,
for “system”, A and B port pressure monitoring Mounted 3-position,
Tandem Center
• All valves (except VC-Series) include manifold with built-
in “System Check” feature, for more precise pressure
holding and improved system control Manual Pump 4-way,
• VE43 solenoid valve includes wire and connectors Mounted 3-position,
Tandem Center,
• Manual or solenoid operation. Locking
Manual Pump 4-way,

In a fine control 120 ton hydraulic system for lifting a string of anchors in a subsea
Mounted 3-position,
pipeline project, the VC-4 remote valve provides safety shutdown capacity on the
ship’s deck. Tandem Center,
Manual Remote 4-way,
Mounted 3-position,
Tandem Center,
Locking 1)

Mounted 3-position,
Closed Center
Mounted 3-position,
Closed Center,
Locking 1)
Solenoid Pump 4-way,

24 VDC Mounted 3-position,
Tandem Center
1) with pilot-operated check valves.
136
4-Way Directional Control Valves
130 89
VC/VM
VE
184 1)
1 Series
146
38 1)
31
GB
GP B A adjustable relief valve
1/4"- 3/8"- auxiliary ports
2 Flow Capacity:
18NPTF 18NPTF
VM43, VM43L
1)
for VM43L only
17 l/min
241
130
700 bar
184 1)
243
3/8"-
144
18NPTF
38 1)
1
GB
B A
31
19 GP
17 35 1/4"- 89
76 76 2
18NPTF 3/8"-18NPTF
1/4"-20UNC (2x) 114 1)
VC-4, VC-4L, VC-20, VC-20L VE43 Fittings
1)
VC-4L and VC-20L only For additional fittings see the
fitting page of the System
Model Hydraulic Schematic Flowpath
Components section.
Number Symbol
Advance Hold Retract
(kg)
VM43 A A A 3,1 Page: 125
P A P T P T P T
T B Locking Valves
B B B
For applications requiring
VM43L A A A 4,9 positive load holding, VM-
P
and VC-Series valves are
A P T P T P T
available with a pilot-
B
T operated check valve. This provides
B B B
hydraulic locking of the load until the
VC-4 2)
AB 2,9 valve is shifted into the retract position.
To order this feature, place an “L” at the
P T
A A A end of the model number
VC-4L 2)
A B P T P T P T 4,7
B B B
P T
Pendants for VE-Series
VC-20 2)
AB 2,9 Solenoid Valves
P T
A A A When ordering Enerpac VE-
A B Series solenoid valve, the
VC-20L 2) P T P T P T 4,7
pendant must be ordered
separately. Pendant connection to be
B B B
plugged into electric box of pump.
P T
VE43 B B B 9,3
P To be used with Pendant
A
solenoid valve: Model Nr.
B A A A
T
T P T P T P VE43 ZCP-3
2) VC-Series remote valves include Return line kit VRL-10.
www.enerpac.com 137
Pressure and Flow Control Valves Hydraulic Technology Worldwide
From left to right: V-152, V-66, V-82, V-161, V-42, V-17
Your Hydraulic
Control Solution
Valve Applications
To see these valves used in
typical hydraulic circuits, please
see our ‘Yellow Pages’.
Page: 112
The V-152 pressure relief valve limits the

pressure or force developed in the hydraulic
system.
• All valves are rated for 700 bar operating pressure

• All valves feature NPTF porting to insure against leakage at
rated pressure
• All valves are painted, coated, or plated for corrosion
resistance
• Viton® seals (in V-66NV and V-152NV) for high temperature
applications, nickel-plated for maximum corrosion resistance
22 69 22 69 22 25 64
88 88 98 89
41 41 32
41
60 47 60 47 64 4,8
73 47
3/8"-18NPTF 1/4"-18NPTF 1/2"-14NPTF 37
3/8"-18NPTF
V-82 V-182 V-8F V-91
38 38 73
28 3/8"-
101 18NPTF
38 66 41
31
119 3/8"-18NPTF
1/2"-14NPTF 30 7 (2x) 50 19
V-10 V-17 V-42
22 51 22 25 193 max. 22 70
ø 38 38
79
102 111 120
51 51 51
89 57 89 57 115 89 57
3/8"-18NPTF 25 3/8"-18NPTF 25 3/8"-18NPTF (3x) 3/8"-18NPTF 25
V-66, V-66NV V-66F V-152, V-152NV V-161
Valve dimensions in mm
138
Pressure and Flow Control Valves
Premounted Manifolds Fittings V
For two or four port For additional fittings Series
manifolds with integral see the fitting page of
flow control valves, see the System Components
the manifold page of the section.
System Components section.
Page: 124 Page: 125

700 bar
Valve Type and Hydraulic
Model Number Description Symbol
Needle Valve V-82: To control cylinder speed. 1 4

/ " NPTF female ports. Also suitable
V-82 Can also be used as shut-off valve for gauge snubbing (also V-82).
V-182 for temporary load holding. V-8F: Like V-82, but with very fine
3/8" NPTF female ports.
metering for precise flow control.
V-8F
V-182: Same as V-82, but with Not recommended as shut-off valve.
Snubber Valve V-91: Infinitely adjustable for valve to protect the gauge during
V-91 metering oil out of a gauge to high cycling applications. 1/2" NPTF
prevent snapping of gauge pointer male and female threads for use with
when load or pressure is suddenly GA-1, GA-2 or GA-4 gauge
released. Also suitable as shut-off adaptors.
Auto Damper® V-10: To be used when gauge No adjustments are necessary.

pressure must be monitored during 1/2" NPTF male and female threads for
Valve
V-10 high cycle applications. Creates a use with GA-1, GA-2 or GA-4 gauge
flow resistance when load is adaptors.
released suddenly.
Check Valve V-17: Ruggedly built to resist shock

V-17 and operate with low pressure drop.
Closes smoothly without pounding.
3/8" NPTF female ports.
Pilot Operated V-42: Can be mounted at the Tee-fitting in the cylinder retract line.
cylinder to hold the load in case of 3/8" NPTF female ports.
Check Valve
V-42 system pressure loss. Normally used Pilot presure ratio 14% (6,5:1).
with double-acting cylinders where
pilot port receives pressure from a
Manually Operated V-66, V-66NV: For load holding nickel-plated.

Check Valve applications with single and double V-66F: Similar to V-66, but with very
V-66, V-66NV * acting cylinders. Valves allow oil to fine metering capability for precise
flow back to tank when cylinder flow control. V-66F is not designed
V-66F
retracts. V-66NV with Viton seals, for load holding.
Pressure Relief V-152: Limits pressure developed To increase pressure setting, turn
Valve by the pump in hydraulic circuit, thus handle clockwise. Includes:
V-152 limiting the force imposed on other • 0,9 m return line hose kit,
components. Valve opens whenever • ± 3% repeatability,
V-152NV *
preset pressure is reached. • 55-700 bar adjustment range.
Sequence Valve V-161: To control oil flow to a allow flow to the secondary circuit. A
V-161 secondary circuit. Flow is blocked pressure differential is always
until system pressure rises to the maintained between the primary and P A
V-161 setting. When this pressure secondary circuit.
level is reached, the V-161 opens to Min. operating pressure: 140 bar.
* See page 62 for more information about products for use in high temperature and extreme environment applications.
www.enerpac.com 139
Enerpac Hydraulic Presses Hydraulic Technology Worldwide
ENERPAC Hydraulic Presses are available in These Press features increase productivity and
broaden the range of applications:
a variety ofKcapacities and sizes. The press The exclusive “Hydrajust”

frames bed positioning is standard
H are welded for maximum strength and
on 50, 100 and 200 ton VLP-
durability. Strong frames and powerful high- Series workshop presses
O with double-acting cylinder,
pressureP hydraulics will provide years of A allowing adjustment of the
lower bed.
dependable service in many applications.
N D
3
00 available
Enerpac Presses are M in Bench,
Moveable pumptable on
C-Frame, Arbor, Workshop and Roll-Frame presses with electric pumps
models. allow for easy side loading of
E large workpieces.
F J
For
G safety reasons, all Enerpac presses with air
and electric-drive pumps can be supplied with
hand operated valves.
B This allows operation
only when the valve
10 Chandle is hand-held in the
00 Optional “V-blocks” for
appropriate position. Once released, the valve positioning of complex parts,
are designed with high-
automatically returns to the centre (hold) strength steel for long life.
position.
140
Press Section Overview
BCapacity Press type and functions Serie Page
ton
(kN)
A 10 Bench Presses VLP 142

(101)F
D
25-200 Workshop Presses VLP 142
J
(232-1995) E
50-200 Roll-Frame Presses BPR 144

C (498-1995)
G
5-20 C-Clamp Presses A 146
(45-178)
J
H
10-30 Arbor Presses A 146
(101-295)
Available in capacities from
10 to 200 ton, each Enerpac 10-200 Press Accessories VB, A 148
press consists of three basic (101-1995) Press Speed Chart IPL
high quality components: a
press frame, a power source
and a cylinder. 900- Tension Meters TM 149
Welded Frame 90.000 kg Load Cells LH
All presses feature a welded
steel frame for optimum
strength. The larger models
include features like
A
workpiece side-loading and

height adjustment of the IMPORTANT!
lower bed. The frameworks of the
workshop presses are
J
Power Source exclusively designed for

Depending on the production pressing operations, not for pulling.
requirements, Enerpac For pulling applications please contact
presses can be powered by Enerpac.
manual, air-hydraulic and
electric-drive power sources.
M
Cylinder
Depending on the application,
double-acting cylinders offer In order to fully comply
increased efficiency. Check with CE regulations,
B
C
out the Selection Charts for some presses must be

00
0
the press best suited for your equipped with specific

30
10
needs. safety components, such as spring

centered valves, two-hand control
Gauge devices or others.
K
All Workshop presses and

P
Roll-Frame Presses feature

an easy to monitor
E
pressure/force gauge for

H
F
O
increased safety.
G
N
www.enerpac.com 141
VLP-Series, Bench and Workshop Presses Hydraulic Technology Worldwide
From left to right: VLP-506ZE5S, VLP-1006ZE3S, VLP-106P142, VLP256PAT1
No Workshop can
do without one
Optional V-Blocks
To facilitate positioning of
pipes and bars, or placed
upside-down, to serve as a
convenient worktable.
Featuring precise fit into the press
bolster. Each model number includes
two V-blocks.
To be used V-Blocks
with VLP-press Model Number
ton
10 VB-10
25 VB-25
50 VB-501
100 VB-101
• Quality welded frame for maximum strength and stability
200 A-200
• Optimum daylight and bed width
• With hand pump, air or electric driven power source
Page: 148
• Single or double-acting GOLDEN RING DESIGN cylinders
• Standard glycerine filled gauge with scale reading in kN/bar
Centered Manual Valves
• Moveable pump table on presses with electric pump allows
Manual 3-position valves on
for easy side loading for large workpieces
electric pumps supplied on
• Height adjustment of lower bed on 25 ton press with a winch VLP-Series presses
• Unique “Hydrajust” bed positioning device on 50, 100 and 200 automatically move to the
ton press with double-acting cylinder allows adjustment of tandem centre position for safety
the lower bed reasons.
SELECTION CHART
Press Maximum Press Power Source Cylinder

Capacity Daylight (mm) Model Number Pump Type Valve Type Pump Page: Stroke Cylinder Page:
ton Model Nr. Model Nr.
(kN) Vertical Horizontal Man. Elec. Air Man. Elec. (mm)
10 430 432 VLP-106P142 • • P-142 68 • 155 RC-106 8
(101) 430 432 VLP-106PAT1 • • PATG-1102N 98 • 155 RC-106 8
25 1225 510 VLP-256P392 • • P-392 68 • 159 RC-256 8
(232) 1225 510 VLP-256PAT1 • • PATG-1102N 98 • 159 RC-256 8
994 1000 VLP-506P802 • • P-802 70 • 159 RC-506 8
50 994 1000 VLP-506ZE5S • • ZE5410SW-S 90 • 155 RR-506 34
(498) 994 1000 VLP-506ZE5C • • ZE5410CW-S 90 • 155 RR-506 34
994 1000 VLP-5013ZE5S • • ZE5410SW-S 90 • 333 RR-5013 34
100
989 1000 VLP-1006ZE3C • • ZE3410CW 90 • 168 RR-1006 34
(933) 989 1000 VLP-1006ZE3S • • ZE3410SW 90 • 168 RR-1006 34

989 1000 VLP-10013ZE3S • • ZE3410SW 90 • 333 RR-10013 34
200 1) 1340 1220 VLP-20013ZE4S • • ZE4420SW 90 • 333 RR-20013 34
1)
1995 kN
= Single-Acting = Double-Acting
142
Bench and Workshop Presses
Press Gauges
All presses include a gauge
“Hydrajust”
Bed Positioning VLP
and gauge adaptor, Allows vertical Series
matching the press capacity. adjustment of
the lower bed on
the 50, 100 and
Press Gauge Adaptor 200 ton VLP press.
Capacity Model Model
Number Number
ton The “Hydrajust” Capacity:
10 GF-10B GA-4 bed positioning is
25 GF-20B GA-2 not designed to 10 - 200 ton
50 GF-50B GA-2 withstand full cylinder
capacity, only to be used for Maximum Daylight x Width:
100 GF-871B GA-3
200 GF-200B GA-3
bed adjustment. 1340 x 1220 mm
Page: 126 Page: 148 700 bar
A
IMPORTANT! The frameworks of
the workshop presses are
exclusively designed for pressing
J operations, not for pulling. For pulling
H K
applications please contact Enerpac.
N
E B A
G 227
A
VLP 10 ton Bench A
K
K
K M
J
M J H 333
J H 400
H 140 P P M
300 O
O D
O P D A
D 200
N
N N
E B E B E B
F C F C F C
G 770 G 1000 G 1120
VLP 25 ton VLP 50 and 100 ton VLP 200 ton
Speed (mm/sec)* Dimensions (mm) Press
Model Number
Rapid Pressing
Advance
A B C D E F G H J K M N O P (kg)
{2,5} * {0,6} * 110 80 – – 432 – 542 620 748 430 – 80 – – 49 VLP-106P142
10,0 1,8 110 80 – – 432 – 542 620 748 430 – 80 – – 54 VLP-106PAT1
{3,4} * {0,7} * 260 140 510 32 510 630 700 1622 1740 370 140 212 1070 122 165 VLP-256P392
5,0 0,8 260 140 610 32 510 630 700 1622 1740 370 323 212 1070 122 161 VLP-256PAT1
{5,5} * {0,3} * 290 250 560 32 990 1200 1360 1879 1879 244 425 540 1290 150 595 VLP-506P802
4,1 3,9 290 250 560 32 990 1200 1360 1879 1879 244 425 540 1290 150 675 VLP-506ZE5S
4,1 3,9 290 250 560 32 990 1200 1360 1879 1879 244 425 540 1290 150 660 VLP-506ZE5C
4,1 3,9 290 250 560 32 990 1200 1360 1879 2042 244 425 540 1290 150 700 VLP-5013ZE5S
7,7 0,7 400 340 560 40 990 1240 1400 1879 1885 239 425 540 1290 150 962 VLP-1006ZE3C
7,7 0,7 400 340 560 40 990 1240 1400 1879 1885 239 425 540 1290 150 970 VLP-1006ZE3S
7,7 0,7 400 340 560 40 990 1240 1400 1879 2050 239 425 540 1290 150 993 VLP-10013ZE3S
5,2 0,5 553 233 560 76 1220 1620 1740 2285 2370 377 425 453 1415 254 1992 VLP-20013ZE4S
* {…} = advance speed in mm per handpump stroke.
www.enerpac.com 143
BPR-Series, Roll-Frame Presses Hydraulic Technology Worldwide
Shown: BPR-5075
Expert Designed
Versatility
Cylinder adjustment
Cylinder adjustment allows
horizontal side to side
cylinder positioning.
Hydra-Lift
• Quality welded frame for maximum strength and long life
Allows easy, effortless
• Frame rolls easily on 4 steel roller bearings daylight adjustment.
• Exclusive ‘Hydra-Lift’ bolster for effortless adjustment of Standard on all Roll-Frame
presses.
the vertical daylight
• Roller head design is standard to allow lateral movement
Page: 148
and locking of the cylinder up to 300 mm left or right of
centre
• All models in the quick selection chart have been matched Optional V-Blocks
to an electric pump, double-acting cylinder, hose and These V-Blocks are
gauge, offering the complete package designed for easy fixturing of
round stock and other non-
• Roll-Frame design features a stationary bed with the ability uniform materials. Featuring
to support heavy loads precise fit into the press bolster.
Page: 148
Press Vertical Maximum Electric Pump Press Double-Acting Speed

Capacity Daylight Bed Model Cylinder (mm/sec)
A Width Number
(mm) E Model Stroke Model Rapid Pressing
ton (kN) min. max. (mm) Number Number Advance
Page (mm) Page
50 (498) 152 942 730 ZE5420SW-S 90 BPR-5075 333 RR-5013 34 4,1 3,9
100 (933) 159 1048 889 ZE3420SW 90 BPR-10075 333 RR-10013 34 7,7 0,7
200 (1995) 279 1295 1219 ZE4420SW 90 BPR-20075 330 RR-20013 34 5,2 0,5
144
Roll-Frame Presses
An BPR-20075 Roll-Frame Press is used to remove a large shaft from this pillow-block
assembly. The Roll Frame design allows this heavy part to be safely loaded with an
overhead crane.
BPR
Series
Capacity:
50-200 ton
Maximum Daylight x Width:
1295 x 1219 mm
700 bar
IMPORTANT!
The frameworks of the
presses are exclusively
designed for pressing
operations, not for pulling. For pulling
applications please contact Enerpac.
F
Gauges
All press models include a
E
gauge and gauge adaptor,
matching the press capacity:
Press Gauge Model Adaptor

Capacity Number Model
N Number
D
A ton
K B 50 GF-50B GA-2
100 GF-871B GA-3
200 GF-200B GA-3
M L C For more information on gauges, please
refer to the System Components
G section.
J H Page: 126
Roll-Frame Press Dimensions (mm) Press

Model
Number
A
(min.-max.) B C D E F G H J K L M N (kg)
152-942 526 971 264 730 933 127 1420 1626 203 270 762 2870 917 BPR-5075
159-1048 673 965 222 889 1143 146 1605 1676 203 270 813 3021 1767 BPR-10075
279-1295 984 933 254 1219 1626 232 2150 2197 203 381 915 3200 4186 BPR-20075
www.enerpac.com 145
A-Series, C-Clamp and Arbor Presses Hydraulic Technology Worldwide
Shown from left to right: A-220, A-330 and A-310
The Standard
Workshop Tools
Push Pin A-183

For applications requiring
precision pressing, such as
shaft removal and insertion.
This attachment fits 10 ton
cylinders and requires the use of a
threaded adaptor saddle (A-13).
Smooth Saddle A-185

For pressing applications of
delicate parts, such as
aluminium castings, this
C-Clamp Press saddle decreases surface
• 5, 10 and 20 ton capacity marks during the pressing application.
Requires 10 ton cylinder and threaded
• Operational in all positions adaptor saddle (A-13).
Page: 168
Arbor Press
• 10 and 30 ton capacity
10 ton Bench Presses
• Foot mounting holes for horizontal or vertical positioning For 10 ton VLP-Series Bench
• Machined working surfaces for easier fixturing Presses selection see:
• Slotted back to simplify loading and unloading of
longer parts
Page: 142
A-310 Abor Press

used for compacting
powder at 10 ton.
Press Press Maximum Maximum Press Cylinder

Type Capacity Vertical Bed Model Model
Daylight Width Number Number *
ton (kN) (mm) (mm) Page:

5 (45) 165 51 A-205 5 ton RC-cylinder* 8
C-Clamp 10 (101) 228 57 A-210 10 ton RC-cylinder* 8
20 (178) 305 70 A-220 25 ton RC-cylinder** 8
10 (101) 227 135 A-310 10 ton RC-cylinder* 8
Arbor
30 (295) 260 178 A-330 RC-308* 8
* Recommended cylinder must be ordered separately.
** Must be limited to 20 ton.
146
C-Clamp and Arbor Presses
A perfect example of the force and versatility of the Enerpac A-220 C-Clamp press.
A
Series
Capacity:
5-30 ton
Maximum Daylight x Width:
305 x 178 mm
700 bar
For high-cycle production
applications, the C-Clamp
and Arbor presses should
be limited to 50% of their
capacity.
Hydraulic Cylinders
Top View Working Surface
Cylinders for C-Clamps and
59 Arbor Presses must be
1/2"-18UN
ordered separately.
G
12,7
Page: 7
B E 291 (A-310) M
F 375 (A-330)
Hydraulic Pumps
J 8,6 Pumps for C-Clamps and
(8x) Arbor Presses must be
D F ordered separately.
D
A C
A C
O Page: 67
G H
K K
N
J L H
B E
A-205, A-210, A-220 A-310, A-330
Press Dimensions (mm) Press

Model
Number
A B C D E F G H J K L M N O (kg)
291 203 165 95 73 1 2
1 / -16 UN 26 51 66 25 – – – – 7 A-205
406 283 228 152 83 21/4-14 UN 26 76 64 41 – – – – 17 A-210
540 346 305 152 108 35/16-12 UN 26 95 70 44 – – – – 38 A-220
414 281 227 152 135 21/4-14 UN 63 122 19 97 175 65 54 219 27 A-310
557 353 260 152 178 35/16-12 UN 63 140 25 165 203 67 98 276 86 A-330
www.enerpac.com 147
Press Accessories, Press Speed Chart Hydraulic Technology Worldwide
Description Press Type and Model Features

Capacity Number
V-Blocks 10 ton Bench VLP-Presses VB-10 • Facilitate positioning of

25 ton Workshop VLP-Presses VB-25 pipes and bars
50 ton Workshop VLP-Presses VB-501 • All V-Block model numbers
100 ton Workshop VLP-Presses VB-101 include 2 V-blocks.
200 ton Workshop VLP-Press A-200
200 ton BPR-Roll-Frame Press A-200R
Hydra-Lift 50 and 100 ton BPR-Roll-Frame IPL-R100 • Allows easy, effortless

Presses daylight adjustments
200 ton BPR-Roll-Frame Press IPL-R200 • Includes accessory chain.
“Hydrajust” 50 ton Workshop VLP-Presses VHJ-50 • Allowing effortless daylight

Bed 100 ton Workshop VLP-Presses VHJ-100 adjustment by moving the
Positioning 200 ton Workshop VLP-Presses BSS-5380 lower bed up and down
• Can be used with presses
equipped with double-
acting cylinder.
Centered On VLP-Series Workshop ZE-Series • The handle of the manual

Manual Presses equiped with electric Pumps 3-position valve will
Valves pumps with manual valves automatically move to the
tandem centre position
when not operated.
Two-Push- All press models with electric – • Two hand operation of the
Button operated valves press for maximum
Control operator safety
• Call Enerpac for detailed
information.
PRESS SPEED CHART

Press Cylinder Hand Pumps Electric Pumps Air Pumps
Capacity Load mm of plunger travel per handpump stroke mm of plunger travel per second
Two speed Single-speed Two speed Two speed
At 6,9 bar
air pressure
ZE5410SW-S
ton ZE5410CW-S ZE3410SW
(kN) P-142 P-392 P-802 ZE5420SW-S ZE3420SW ZE4420SW PATG-1102N
10 No load 2,5 7,8 – – – – 10,0
(101) Load 0,6 1,7 – – – – 1,8
25 No load – 3,4 – – – – 5,0
(232) Load – 0,7 – – – – 0,8
50 No load – – 5,5 4,1 – 20,8 –
(498) Load – – 0,3 3,9 – 1,9 –
100 No load – – – – 7,7 11,1 –
(933) Load – – – – 0,7 1,0 –
200 No load – – – – – 5,2 –
(1995) Load – – – – – 0,5 –
Note: Values are approximate. Cylinder speed may vary in actual application.
See page 117 in the yellow pages for speed of other combinations with pump and cylinder.
148
Tension Meter and Load Cells
Shown: LH-102 and TM-5 (in middle)
TM
LH
Series
Capacity:
900 - 90.000 kg
±2%
E
Tension Meter TM-5
• Accuracy ±2% of full scale
1/2"-13UNC 5/8"-11UNC
• Zinc and bronze plated to resist corrosion A
• Dual-range readout in kilograms and pounds G FD
• Cushioned metal case provides safe storage and

C
transport B
TM-5
Load Cells LH-Series
• Accuracy ±2% of full scale C
B
• Swivel loading pad reduces eccentric loading for
improved accuracy
A
D
• Maximum indicating pointer reading pre-selected forces
or to maintain maximum force readings 15 G (2x) E
F
• Dual-range readout in kilograms and pounds
LH-Series
Type Gauge Capacity Model Minimum Gauge Dimensions (mm)

Number Reading Increments
(kg) (lbs) (kg) (lbs) (kg) (lbs) A B C D E F G
Direct Mounted 4.500 10.000 TM-5 500 1.000 100 100 120 247 236 50 93 22 19
Direct Mounted 900 2.000 LH-10 100 200 20 20 77 44 57 60 101 215 1 4
/ "- 20, 44,5 BC
Load Cell 4.500 10.000 LH-50 500 1.000 100 100 77 44 57 60 101 215 1/4"- 20, 44,5 BC
900 2.000 LH-102 100 200 20 20 77 44 57 60 147 846 1/

4"- 20, 44,5 BC
Remote Mounted
4.500 10.000 LH-502 500 1.000 100 100 77 44 57 60 147 846 1/4"- 20, 44,5 BC
with 0,6 m Hose
9.000 20.000 LH-1002 1.000 2.000 200 200 77 44 57 60 147 846 1/4"- 20, 44,5 BC
21.000 50.000 LH-2506 3.000 5.000 500 500 101 69 85 60 147 2094 3/
8"- 24, 63 BC
Remote Mounted 45.000 100.000 LH-5006 5.000 5.000 1.000 1.000 132 101 127 60 147 2135 3/8"- 24, 89 BC
with 1,8 m Hose 90.000 200.000 LH-10006 10.000 10.000 1.000 2.500 158 127 158 60 147 2166 3/8"- 24, 102 BC
www.enerpac.com 149
Hydraulic and Mechanical Pullers Hydraulic Technology Worldwide
ENERPAC offers a complete line of pullers Hydraulic Pullers

These hydraulic pullers eliminate time-
with the widest range of sizes, capacities and consuming and unsafe hammering,
heating or prying. Damage to parts is
styles. Whether your application requires minimized through the use of controlled
hydraulic power.
mechanical, hydraulic or the patented Posi Lock®
system, Enerpac can satisfy your requirements.
Posi Lock® Pullers
Made of high strength steel alloys, you can The puller that meets the safety
C
challenge. A control cage holds the
depend on Enerpac pullers to provide years of pulling jaws securely in working
position. This patented feature reduces
trouble-free operation, even in the harshest the possibility of the puller jaws slipping
off the work surface, thereby increasing productivity and
environments. G tool life and reducing dangerous situations for the user.
B
The Posi Lock® feature is available in a mechanical or

hydraulic version.
A
H
F
D
WARNING
Do not exceed 50% of the
rated puller capacity when
using a double crosshead
(2 griparms) or when using puller legs
in combination with bearing puller
attachment.
Always wear Safety

Goggles while using
pullers.
150
Puller Section Overview
Puller Function Capacity Puller Type Series Page
ton
When selecting a puller it is
important to consider 3 8-50 Master Puller Sets BHP 152
basic specifications: Max. Reach: 252 - 700 mm
Max. Spread: 250 - 1100 mm
1. The Capacity:
is the amount of force the
puller is capable of
producing.
Typically, the capacity 8-50 Grip Puller Sets BHP 153
required for a job can be Max. Reach: 249 - 700 mm
determined by using the
shaft diameter of the part
being pulled.
For manual pullers, the
center bolt diameter of the
puller should be at least half
the diameter of the shaft
8-50 Cross Bearing Puller BHP 154
being pulled from. Sets
For hydraulic pullers, the Max. Reach: 354 - 863 mm
capacity in tons should be Max. Spread: 266 - 570 mm
0,28 to 0,4 times the shaft
B
diameter in mm. Use the

following chart:
8-50 Bearing Cup Pullers BHP 155
Shaft Puller Max. Reach: 110 - 145 mm
Diameter Capacity Max. Spread: 26 - 359 mm
0 - 25 mm 10 ton
25 - 50 mm 20 ton
50 - 89 mm 30 ton
89 - 140 mm 50 ton 8-50 Bearing Pullers BHP 155
Max. Width: 110 - 264 mm
2. The Reach:
is the distance between the
bottom of the base and the
jaw flats. The puller’s reach
must equal or exceed the
same distance of the part 2-40 Posi Lock® Mechanical EP 156
being pulled.
Pullers EPP
3. The Spread: Max. Reach: 101 - 355 mm EPX
is the distance between the EPPMI
jaws. The puller’s spread
needs to be greater than the
width of the part being 10-50 Posi Lock® Hydraulic EPH 160
pulled.
Pullers EPHR
Max. Reach: 203 - 355 mm EPHS
100 Posi Lock® Hydraulic EPH 163

Pullers
Max. Reach: 1219 mm
www.enerpac.com 151
BHP-Series, Master Puller Sets Hydraulic Technology Worldwide
Shown: Master Puller Set BHP-3751G
Multi Purpose
Puller Set
WARNING
using a double crosshead
(2 griparms) or when using puller legs
attachment.
Visit the Products section of

our web site for more
information and product
selection charts regarding puller sets and
individual puller component parts.
www.enerpac.com
• Supplied with a full hydraulic set including pump, hose,

cylinder, gauge, gauge adaptor and wooden case
• All Master Puller Sets include a Grip Puller, a Cross
Bearing Puller, a Bearing Cup Puller and a Bearing Puller
Attachment
• High quality, forged steel components provide superior
reliability and service
• Sets include speed crank and adjusting screw for fast
contact to work before hydraulics are applied
Maintenance engineers throughout

the industry greatly appreciate the
Enerpac Master Puller sets
SELECTION CHART
Master Puller Set Capacity * 8 ton 20 ton 30 ton 50 ton Page:

Model Number BHP-1752 1)
BHP-2751G BHP-3751G BHP-5751G
Included Hydraulics Set Weight 37 kg 90 kg 172 kg 298 kg
• Hand Pump P-142 P-392 P-392 P-80 68-71
• Cylinder RWH-121 RCH-202 RCH-302 RCH-603 28
• Saddle – HP-2015 HP-3015 HP-5016 29
• Hose HB-7206QB HC-7206 HC-7206 HC-7206 120
• Gauge GF-120B GF-813B GF-813B GF-813B 126
• Gauge Adaptor GA-4 GA-3 GA-3 GA-3 132
Included Pullers
10 Grip Puller BHP-1762 BHP-252 BHP-352 BHP-552 153
20 Cross Bearing Puller BHP-1772 BHP-262 BHP-362 BHP-562 154
30 Bearing Cup Puller BHP-180 BHP-280 BHP-380 BHP-580 155
40 Bearing Puller BHP-181 BHP-282 BHP-382 BHP-582 155
• Case CM-6 CW-350 CW-350 CW-750
1) Includes Adaptor FZ-1630.
* See warning on this page.

152
Grip Puller Sets
Shown: Grip Puller Set BHP-351G
BHP
Series
Capacity:
8, 20, 30 and 50 ton
Reach:
252- 700 mm
Spread:
249- 1100 mm
700 bar
Ordering Example
• Precise hydraulic control allows fast, efficient and safe Model Number BHP-251G:
pulling includes Grip Puller BHP-252 and a full
hydraulic set. (Hand pump, cylinder,
• High quality, forged steel components provide superior saddle, hose, gauge and gauge adaptor).
• Available with and without full hydraulic set Model Number BHP-252:
includes Grip Puller mechanical parts
only, for use with your existing
hydraulics.
SELECTION CHART
Grip Puller Set Capacity** 8 ton 20 ton 30 ton 50 ton

Model Number BHP-152 1) BHP-251G BHP-351G BHP-551G
• Hand Pump P-142 P-392 P-392 P-80
• Cylinder RWH-121 RCH-202 RCH-302 RCH-603
• Saddle – HP-2015 HP-3015 HP-5016
• Hose HB-7206QB HC-7206 HC-7206 HC-7206
• Gauge GF-120B GF-813B GF-813B GF-813B
• Gauge Adaptor GA-4 GA-3 GA-3 GA-3
10 Grip Puller Model Number BHP-1762* BHP-252* BHP-352* BHP-552*
Maximum Spread (mm) 2-jaw 249 400 593 899
3-jaw 249 499 800 1100
Maximum Reach (mm) 2-jaw 252 300 387 700
3-jaw 252 300 387 700
Jaw (mm) Thickness 15 20 24 30
Width 23 27 38 39
Adjusting Screw (mm) Thread 3/4"- 16 UNF 1"- 8 UNC 11/4"- 7 UNC 15/8"- 5.5 UNC
Length 400 675 795 975
1)
Includes Adaptor FZ-1630.
* Grip Puller order number without hydraulics.
www.enerpac.com ** See warning on page 152. 153
Cross Bearing Puller Sets Hydraulic Technology Worldwide
Shown: Cross Bearing Puller Set BHP-361G

BHP
Series
Capacity:
8, 20, 30 and 50 ton
Reach:
354- 863 mm
Spread:
266 - 570 mm
700 bar
• Precise hydraulic control allows fast, efficient and safe selection charts regarding puller sets and
pulling individual puller component parts.
www.enerpac.com
• High quality, forged steel components provide superior
SELECTION CHART
Cross Bearing Puller Set Capacity 8 ton 20 ton 30 ton 50 ton
Model Number BHP-162 1) BHP-261G BHP-361G BHP-561G
• Hand Pump P-142 P-392 P-392 P-80
• Cylinder RWH-121 RCH-202 RCH-302 RCH-603
• Saddle – HP-2015 HP-3015 HP-5016
• Hose HB-7206QB HC-7206 HC-7206 HC-7206
• Gauge GF-120B GF-813B GF-813B GF-813B
• Gauge Adaptor GA-4 GA-3 GA-3 GA-3
20 Cross Bearing Puller 2) Model Number BHP-1772 BHP-262 BHP-362 BHP-562
Spread (mm) Maximum 266 351 454 570
Minimum 106 139 179 220
Reach (mm) Maximum 462 571 711 863
Adjusting Screw (mm) Diameter 3/4"- 16 UNF 1"- 8 UNC 1
1 /4"- 7 UNC 5
1 /8"- 5.5 UNS
Length 400 675 795 975
Leg (mm) Length 105 239 203 609
Length 354 419 457 863
Length – 571 711 –
Length – 114 – –
Upper Leg Ends (mm) Thread 3/4"- 16 x 25 3
/4"- 16 x 25 1-14 x 35 11/4"- 12 x 38
Lower Leg Ends (mm) Thread 5/8"- 18 x 25 5
/8"- 18 x 25 1-14 x 27 11/4"- 12 x 38
30 Bearing Cup Puller 2) Model Number BHP-180 BHP-280 BHP-380 BHP-580
40 Bearing Puller 2) Model Number BHP-181 BHP-282 BHP-382 BHP-582
• Wooden Case CW-166 CW-166 CW-350 CW-750
1) Includes Adaptor FZ-1630.
2) Can be ordered separately without hydraulic components, see next page.
154
Bearing Cup and Bearing Pullers
Shown: BHP-380
Bearing Cup Puller BHP
Series
• Made of high strength steel
alloy
• Easily adapted to Cross
Bearing Pullers for fast and
efficient removal of the most
difficult parts Capacity:
• Adjustable to fit a variety of 8, 20, 30 and 50 ton
bearings and seals
Maximum Reach:
110 -145 mm
Spread Range:
SELECTION CHART
110 - 359 mm
Capacity * 8 ton 20 ton 30 ton 50 ton
30 Bearing Cup Puller 700 bar
Model Number BHP-180 BHP-280 BHP-380 BHP-580
Spread** Max. 110 220 359 359
Min. 26 25 50 50 WARNING
Reach** Max. 110 140 145 145
3/4"- 16 UNF 1"- 8 UNC 11/4"- 7 UNC 15/8"- 5.5
Center Screw Thread using a double crosshead
* See warning on this page. (2 griparms) or when using puller legs
attachment.
Bearing Cup Puller shown

with Crosshead Puller
Attachment.
Shown: BHP-382
Bearing Puller
• Made of high strength steel
alloy
• Wedge-shaped edges allow
removal of the most hard-to-
grip components
• Easily adapted to Cross
Bearing Pullers for fast and Bearing Puller shown with
efficient removal of the most Crosshead Puller
Attachment.
difficult parts
Bearing Puller
Bearing Puller has wedge
SELECTION CHART shaped edges for placing
puller behind hard to reach
Capacity* 8 ton 20 ton 30 ton 50 ton
bearings, gears, etc., where
40 Bearing Puller clearance prevents direct application of
Model Number BHP-181 BHP-282 BHP-382 BHP-582 grip puller arms.
Spread** Max. 104 130 245 245 The Bearing Puller can be used with the
Min. 25 9 17 17 Cross Bearing Puller or the Grip Puller.
Width** 126 150 264 264
Thread 5/8"-18 UNF 5/8"- 18 UNF 1"- 14 UNS 11/4"- 12 UNF
* Read warning on this page

** Dimensions are in mm.
www.enerpac.com 155
EP-Series, Posi Lock® Mechanical Pullers Hydraulic Technology Worldwide
Shown from left to right: EP-206, EP-108
For Safer
and Faster Pulling
Long Jaws
Long Jaws are used to
increase the reach and
spread of manual pullers.
They maintain the same
pulling capacity as the standard jaws,
but reduce clamping force to 25%.
Page: 159
• Patented ‘Safety Cage’ jaw retention system
Shaft Attachments
• Roll threaded shafts for less effort when applying high
torque Shaft protectors and
extenders are live centers
• Slim tapered jaws for improved gripping in tight spots that fit over the standard
• Available in 2 and 3 jaw design and inside and outside puller shaft for tip protection
pulling configuration and additional reach.
• More efficient pulling, as one man can do the job where

manual pullers often require two operators
Page: 159
Application Tip
Because of the unique
safety cage design, Posi
Lock® pullers will grip on
surfaces where normal
pullers would slip off; e.g. tapered
bearings.
Positioning an EP-104
3-jaw puller on the
accessory drive of a
diesel engine.
156
Posi Lock® Mechanical Grip Pullers
Posi Lock® Pullers
1 Patented ‘Safety Cage’ guides
jaws, holding them securely onto
EP
the part.
2 Durable forged jaws provide
EPPMI
positive grip.
Series
3 Jaw head provides pivot and
reaction point for jaws.
4 Pin, for easy jaw removal and
replacement.
5 T-handle provides control of the Capacity:
puller jaws.
6 Drive bolt with rolled threads for 2 - 40 ton
increased force with reduced Maximum Reach:
input torque.
7 Snap-ring retains cage to drive 101- 355 mm
bolt and provides quick removal
Spread Range:
for easy service.
12- 635 mm
QUICK SELECTION CHART EXTERNAL PULLERS Always wear Safety

For quick technical information see next page. Goggles while using
Number Maximum Spread Capacity Model Center Bolt pullers.
of Reach Number Diameter
Jaws
(mm)
(mm) min. - max. ton (kN) (mm) (kg)
2 101 12 - 127 2 (17) EP-204 14 1,4
3 101 12 - 127 5 (45) EP-104 14 1,8 our web site for more
2 152 12 - 178 6 (53) EP-206 16 3,2 information and product
3 152 12 - 178 10 (89) EP-106 16 3,6 selection charts regarding
2 203 19 - 304 12 (106) EP-208 20 5,4 puller sets and individual puller
3 203 19 - 304 17 (151) EP-108 20 6,4 component parts.
www.enerpac.com
2 245 25 - 381 14 (124) EP-210 20 5,9
3 245 25 - 381 20 (178) EP-110 20 7,3
2 304 63 - 457 25 (222) EP-213 29 17,2
Application Tip
3 304 63 - 457 30 (267) EP-113 29 20,0
In determining the correct
2 355 76 - 635 35 (311) EP-216 31 25,8
manual puller capacity for
3 355 76 - 635 40 (356) EP-116 31 30,8 your application, use the
folllowing rule:
The center bolt diameter of the puller
should be at least 1/2 the diameter of the
shaft being pulled on.
Internal Posi Lock® Puller

Example:
A part being pulled from a shaft with a
diameter of 38 mm would require a puller
with a center bolt diameter of at least
19 mm.
QUICK SELECTION CHART INTERNAL PULLERS
Number Maximum Spread Jaw Model Jaw

of Reach Style Number Length
Jaws
(mm)
(mm) min. - max. (mm) (kg)
168 14 - 101 Standard 168 3,9
3 EPPMI-6
218 25 - 133 Long 218 3,9
www.enerpac.com 157
EP-Series, Posi Lock® Mechanical Pullers Hydraulic Technology Worldwide

selection charts regarding
puller sets and individual puller
component parts.
www.enerpac.com
J
E
B
EP-204 2 jaw puller positioned to pull a water
pump.
H G
QUICK SELECTION CHART EXTERNAL PULLERS
F Number Maximum Spread Capacity Model Center Maximum
A of Reach Number Bolt Torque
Jaws Diameter
2 and 3 Jaw External Puller
EP-Series
(mm)
(mm) min. - max. ton (kN) (mm) (Nm)
2 101 12 - 127 2 (17) EP-204 14 27
3 101 12 - 127 5 (45) EP-104 14 54
2 152 12 - 178 6 (53) EP-206 16 102
Slide Hammer
3 152 12 - 178 10 (89) EP-106 16 176
2 203 19 - 304 12 (106) EP-208 20 203
E
3 203 19 - 304 17 (151) EP-108 20 298
2 245 25 - 381 14 (124) EP-210 20 237
B 3 245 25 - 381 20 (178) EP-110 20 373
2 304 63 - 457 25 (222) EP-213 29 644
3 304 63 - 457 30 (267) EP-113 29 814
2 355 76 - 635 35 (311) EP-216 31 1085
3 355 76 - 635 40 (356) EP-116 31 1153
Jaw Tip Detail
QUICK SELECTION CHART INTERNAL PULLERS
C H
Number Maximum Spread Jaw Model Jaw Slide-
of Reach Style Number Length Hammer
Jaws weight
F G (mm)
A (mm) min. - max. (mm) (kg)
Internal Puller 168 14 - 101 Standard 168 1,1

3 EPPMI-6
EPPMI-6 218 25 - 133 Long 218 1,1
158
Posi Lock® Mechanical Grip Pullers
EP
Shaft Attachments
Shaft protectors and
EPPMI
extenders are live Series
centers that fit over
the standard puller
shaft for tip protection
and additional reach.
Long Jaws Capacity:
Long Jaws are used to
increase the reach and
2 - 40 ton
spread of pullers. They Maximum Reach:
maintain the same pulling
capacity as the standard 101- 355 mm
jaws, but reduce clamping
force to 25% of rating. Spread Range:
Length Dia- Increases Order: 12- 635 mm
meter Center Bolt Model
Length Number
(mm) (mm) (mm)
Spread Max. Order:
25 19 9 EPP-4 (mm) Reach Model Visit the Products section of
50 19 38 EPX-4 min. - max. (mm) Number our web site for more
31 22 12 EPP-6 57 - 381 245 EP-11054 information and product
50 22 38 EPX-6 38 - 558 400 EP-11054L
31 25 12 EPP-10 38 - 762 508 EP-11354L component parts.
50 25 38 EPX-10 50 - 965 635 EP-11654L www.enerpac.com
50 35 21 EPP-1316 25 - 133 218 EP-10554L*
* for EPPMI-6 only
Optional accessories
Dimensions (mm) Model

Number
Spread Overall Length Max. Center Jaw Tip Tip Hex
min. - max. Reach Bolt Width Clearance Depth Socket
Diam. Size
(inch) Shaft Shaft Long Jaws
A B C E F G H J Protectors Extenders
12 - 127 245 - 323 101 14 15 4,1 4,6 7/8" EP-204 EPP-4 EPX-4 –
12 - 127 245 - 323 101 14 15 4,1 4,6 7/8" EP-104 EPP-4 EPX-4 –
12 - 178 323 - 476 152 16 19 8,1 6,1 11/16" EP-206 EPP-6 EPX-6 –
12 - 178 323 - 476 152 16 19 8,1 6,1 11/16" EP-106 EPP-6 EPX-6 –
19 - 304 412 - 615 203 20 22 6,4 9,1 11/8" EP-208 EPP-10 EPX-10 EP-11054
19 - 304 412 - 615 203 20 22 6,4 9,1 11/8" EP-108 EPP-10 EPX-10 EP-11054
25 - 381 489 - 736 245 20 25 6,4 9,1 11/8" EP-210 EPP-10 EPX-10 EP-11054L
25 - 381 489 - 736 245 20 25 6,4 9,1 11/8" EP-110 EPP-10 EPX-10 EP-11054L
63 - 457 660 - 965 304 29 31 12,7 9,7 111/16" EP-213 EPP-1316 – EP-11354L
63 - 457 660 - 965 304 29 31 12,7 9,7 111/16" EP-113 EPP-1316 – EP-11354L
76 - 635 800 - 1155 355 31 36 13,5 11,7 113/16" EP-216 EPP-1316 – EP-11654L
76 - 635 800 - 1155 355 31 36 13,5 11,7 113/16" EP-116 EPP-1316 – EP-11654L
Note: Overall length (B) is dependent on position of center bolt.
Dimensions (mm) Model Always wear Safety

Number Goggles while using
Spread Overall Length Max. Slide Jaw Tip Tip
pullers.
min. - max. Reach Rod Dia. Width Clearance Depth
A B C E F G H
14 - 101 736 168 14,2 8 3,0 1,5
EPPMI-6
25 - 133 787 218 14,2 8 7,6 4,6
www.enerpac.com 159
EPH-Series, Posi Lock® Hydraulic Pullers Hydraulic Technology Worldwide
Shown: EPHR-110
High-Tech Pulling
Transport and Store

Conveniently stores and
transports hydraulic pullers
and accessories.
Order the EPT-2550 Storage
Cart and make your job easier to do!
Long Jaws
Used to increase the reach
and spread of pullers. They
maintain the same pulling
capacity as the standard jaws,
but reduce clamping force to 25%.
Page: 161
Application Tip
Because of the unique safety
• Patented ‘Safety Cage’ jaw retention system cage design, Posi Lock®
• High force hydraulic system for effortless pulling of large pullers will grip on surfaces
components where normal pullers would
slip off; e.g. tapered bearings.
• Slim tapered jaws for better gripping in tight spots
• Available in 2 and 3 jaw design
• More efficient pulling, as one man can do the job where Visit the Products section of
manual pullers often require two operators our web site for more
component parts.
www.enerpac.com
Number Maximum Capa- Model

of Spread city Number*
Jaws
(mm) ton (kN)

2 304 EPH-208
10 (101)
3 304 EPH-108
2 381 EPH-210
15 (142)
3 381 EPH-110
An EPHR-116, 50 ton 2 457 EPH-213
25 (232)
hydraulic Posi Lock® puller 3 457 EPH-113
easily removes the main 2 635 EPH-216
drive gear from this metal 50 (498)
forming brake press. 3 635 EPH-116
* Cylinder is not included.
160
Posi Lock® Hydraulic Grip Pullers
SETS SELECTION CHART
Style Capa- Basic Puller Cylinder Stroke Pump Set

EPH
city Set Model Series
(ton) (mm) Number* (kg)
10 EPH-208 RC-106 152 – EPHR208 10
10 EPH-208 RC-106 152 EP-1E EPHS208E 27
15 EPH-210 RC-1510 254 – EPHR210 22
2 15 EPH-210 RC-1510 254 EP-1E EPHS210E 38
Jaw 25 EPH-213 RC-2514 362 – EPHR213 44 Capacity:
Puller
25 EPH-213 RC-2514 362 EP-1E EPHS213E 53 10 -50 ton
50 EPH-216 RC-5013 336 – EPHR216 87
50 EPH-216 RC-5013 336 EP-2E EPHS216E 123 Maximum Reach:
10 EPH-108 RC-106 152 – EPHR108 11 203 -355 mm
10 EPH-108 RC-106 152 EP-1E EPHS108E 28
Spread Range:
15 EPH-110 RC-1510 254 – EPHR110 23
3 15 EPH-110 RC-1510 254 EP-1E EPHS110E 39 19-635 mm
Jaw 25 EPH-113 RC-2514 362 – EPHR113 48
Puller Maximum Operating Pressure:
25 EPH-113 RC-2514 362 EP-1E EPHS113E 57
50 EPH-116 RC-5013 336 – EPHR116 91
700 bar
50 EPH-116 RC-5013 336 EP-2E EPHS116E 127
* Standard set EPHS models shipped with 230 VAC pump. Pump Sets
All Posi Lock Hydraulic Puller
Sets that include 230 VAC
pumps, will feature the
following components:
EP-1E EP-2E
Pump Set Pump Set
Pump PUJ-1200E ZE4210ME
Hose HC-7210 HC-7210
Gauge G-2536L G-2536L
B
Adaptor – GA-3
Components for 115 VAC pumps are
available on request.
D
C
H G
F
Accessories 1)
Standard Standard
A
included included Optional
Dimensions (mm) Model
Number*
Spread Overall Maximum Jaw Jaw Tip Tip
min. - max. Length Reach Length Width Clearance Depth
Ram Point Lift Long

(kg) Sets Plates Jaws
A B C D F G H
19 - 304 498 203 237 22 7,4 6,9 6,4 EPH-208 EPH-155 EPH-11052 EPH-11054
19 - 304 498 203 237 22 7,4 6,9 7,3 EPH-108 EPH-155 EPH-11052 EPH-11054
25 - 381 665 245 270 25 11,2 9,1 10,0 EPH-210 EPH-155 EPH-11052 EPH-11054L
25 - 381 665 245 270 25 11,2 9,1 11,3 EPH-110 EPH-155 EPH-11052 EPH-11054L
63 - 457 846 304 348 31 12,9 9,7 21,3 EPH-213 EPH-257 EPH-11352 EPH-11354L
63 - 457 846 304 348 31 12,9 9,7 25,0 EPH-113 EPH-257 EPH-11352 EPH-11354L
76 - 635 919 355 413 36 15,0 11,7 40,8 EPH-216 EPH-508 EPH-11652 EPH-21654L
76 - 635 919 355 413 36 15,0 11,7 45,4 EPH-116 EPH-508 EPH-11652 EPH-11654L
1) See next page for details.
www.enerpac.com 161
Posi
General ® Hydraulic
LockPurpose Puller Accessories
Cylinders Hydraulic Technology Worldwide
RAM POINT SETS SELECTION CHART

Fits Puller Set EPH-208, EPH-210 EPH-213 EPH-216
Model Number EPH-108, EPH-110 EPH-113 EPH-116
Always wear Safety

Goggles while using
pullers.
Ram Point Set 1)

EPH-155 EPH-257 EPH-508
Model Number
Ram Points Included: Ram Point Dimensions Diameter x Length (mm)
ø25 x 25 ø38 x 57 ø51 x 76 Visit the Products section of
Flat Ram Points ø25 x 76 ø51 x 57 ø70 x 76 our web site for more
– ø51 x 102 ø70 x 127 information and product
ø25 x 38 ø38 x 64 ø51 x 95 selection charts regarding
Tapered Ram Points ø25 x 89 ø51 x 64 ø51 x 95
component parts.
– ø51 x 114 ø70 x 140 www.enerpac.com
Ram Point Adaptor – – ø70 x 57
1) Standard included in EPH-Series Posi Lock Pullers.
LIFT PLATE SELECTION CHART

Fits Puller Model Thick- Dia-
Set Model Number Number * ness meter
(mm) (mm)
EPH-208 EPH-11052 6,4 ø153
EPH-108 EPH-11052 6,4 ø153
EPH-210 EPH-11052 6,4 ø153
EPH-110 EPH-11052 6,4 ø153
EPH-213 EPH-11352 9,7 ø203
EPH-113 EPH-11352 9,7 ø203
EPH-216 EPH-11652 9,7 ø254
EPH-116 EPH-11652 9,7 ø254
* Mounting screws included. Lifting plates are standard included with EPH-Series Pullers.
EPHR-116 used to remove

electric motor pullies. Puller is
positioned using the Lift Plate.
LONG JAW SELECTION CHART

Fits Puller Model Number Spread Reach Long Jaws are
Set Model Number of Jaws optional
Number required accessories
and used for
(mm) (mm) (kg) added reach
EPH-208 EPH-11054 2 57 - 381 246 1,1 and spread.
They have the
EPH-108 EPH-11054 3 57 - 381 246 1,1 same load
EPH-210 EPH-11054L 2 38 - 559 401 2,5 capacity as
EPH-110 EPH-11054L 3 38 - 559 401 2,5 standard jaws
with 25% of
EPH-213 EPH-11354L 2 38 - 762 508 4,8 the clamping
EPH-113 EPH-11354L 3 38 - 762 508 4,8 force.
EPH-216 EPH-11654L 2 50 - 965 635 7,5
EPH-116 EPH-11654L 3 50 - 965 635 7,5
162
Posi Lock® 100 Ton Hydraulic Grip Pullers
EPH-1003E
EPH
Series
Capacity:
100 ton
Maximum Reach:
1219 mm
Spread Range:
190-1778 mm
700 bar
Pushing Adaptors
All Posi Lock® 100 Ton
Hydraulic Pullers include
following pushing adaptors.
• Roller cart with power lift
• Hydraulically actuated lift cylinder on cart extends puller
Diameter Length Model
from ground to a height of 1,7 m (mm) (mm) Number
• Adjustable jaw tips 89 737 EPHT-1162
• Puller easily detaches from cart 89 483 EPHT-1163
• Includes electric two stage pump with remote jog switch 89 229 EPHT-1164
for fingertip control of the removal process
• Puller height range 673 to 1690 mm
• Multiple pushing adaptors included
1041
H
A
F
G
C
D
B
1980 max. 1690
The EPH-1003E quickly

and easily removes this min. 673
drive sheave from its shaft.
Number Spread Capacity Model Spread Overall Reach Jaw Jaw Tip Tip
of Range Number Length Length Width Clearance Depth
Jaws ton A B C D F G H
(mm) (kN) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
2 190 - 1778 100 (890) EPH-1002E 190 - 1778 1955 1219 1346 76 89 89 771
3 190 - 1778 100 (890) EPH-1003E 190 - 1778 1955 1219 1346 76 89 89 907
www.enerpac.com 163
Enerpac Hydraulic Tools Hydraulic Technology Worldwide
ENERPAC offers an extensive range of dedicated tools

for a variety of specific and flexible applications. Pump and Tool
Sets
Whatever your requirement… cutting, punching, Most hydraulic tools in this
section are available in
spreading or bending… you can be sure that Enerpac has sets, for a perfect tool-
pump match.
the correct tool to do your job safely and efficiently.
Featuring maintenance sets, machine lifts and load

skates, as well as hole punches, pipe benders and cable Hydraulic System Set-up
cutters, Enerpac has the tools to ensure that even your Check out our ‘Yellow Pages’
section for help on system set-
most demanding applications can be undertaken with ups and valving configurations.
the highest degree of safety and accuracy.

Page: 112
Bolting Tools
More Enerpac Tools you will
find in our Bolting Tools
section in this catalogue.
Page: 184
164
Hydraulic Tool Section Overview
Capacity Tool type and functions Series Page

ton (kN)
2,5- 12,5 Maintenance Sets MS 166

(22 -116)
35 Punch
MSP, 170
(311) Punch-Pump Sets SP,
STP
16 Lifting Wedge LW 172
(157)
8,5 - 20 Machine Lifts SOH 173

(75 -178)
1- 80 Load Skates
ER, 174
(8,9 - 712) ES,
ELP
19-453 litres Industrial Storage Cases CM 176
0,75 - 1,00 Hydraulic Wedgie A, 177

(6 - 8,9) Spread Cylinders WR
3 - 20 Hydraulic Cutterheads
WHC, 178
(26 - 178) Cutterhead-Pump Sets WHR,
STC
3 - 20 Self-Contained Hydraulic Cutters WMC 179
(26 - 178)
Nominal Bore Pipe Benders STB 180

1/2 - 4 inch
Strand Diameter Post Tensioning Tools DPT, 182

3/8 - 0,6 inch PT
www.enerpac.com 165
MS-Series, Maintenance Sets Hydraulic Technology Worldwide
Shown: MS2-10
The Universal
Hydraulic Tool Box
Maintenance Sets
Enerpac Maintenance sets are a
complete assortment of hydraulic
powered tools. Using these sets
allows you to quickly configure a unique
tool to meet your most difficult jobs.
Built around the Enerpac lightweight
hand pump, hose and cylinder, these
sets enable you to push, pull, lift, press,
straighten, spread and clamp with forces
up to 12,5 ton.
• All sets include Enerpac pump, hose, cylinder and gauge More Information
• Lock-on or threaded connectors For detailed information on
• Complete maintenance set for almost every maintenance all included attachments,
application see the next pages.
Clamping a workpiece is just one of Page: 168

the many applications for the
Enerpac maintenance sets.

Capacity Set Number of
using attachments* Model Attachment
Number Components
ton (kN) (kg)

2,5 (22) MS2-4 P-142 HC-7206 RC-55 GP-10S GA-2 35 26
2,5 (22) MSFP-5 P-142 HC-7206 RC-55 G2535L GA-3 24 20
5,0 (50) MSFP-10 P-392 HC-7206 RC-106 G2535L GA-3 22 48
5,0 (50) MS2-10 P-392 HC-7206 RC-106 GP-10S GA-2 40 63
12,5 (116) MS2-20 P-392 HC-7206 RC-256 GP-10S GA-2 19 95
5,0-12,5 (50-116) MS2-1020 P-392 HC-7206 RC-102, -106, -256 GP-10S GA-2 59 158
* If no attachments are being used, capacity is double these values. Maximum operating pressure is then 700 bar.
166
Universal Maintenance Sets
max.
CAUTION! WARNING! MS
50% When cylinders are Only use attachments Series
used with provided with set.
maintenance set Non-Enerpac
attachments or components, the attachments and longer extension
maximum system pressure must tubes will reduce column
be limited to half the rated strength.
pressure (350 bar).
Capacity (using attachments):

2,5 -12,5 ton
350 bar
APPLICATION EXAMPLES
■
127 mm Extension Tube 27 ■
22 Lock-on
Connector
■
27 254 mm Extension Tube
■
15 Rubber Flex Head
■
■
21 Lock Pins
■
19 Pipe Coupling ■
Lock Pin 21
■
1 Threaded adaptor ■8 Collar Clamp Head
■
■21 Lock Pin
■6 Lock-on
Clamp Toe
■
2 Base
Attachment Smooth Saddle 11
attached to the plunger
■
■
using a Threaded Adaptor 1ii
■4 Flat Base,
attached to the Base Attachment
■
using a Threaded Connector 5 ■
18 Chain with Hook
■
16 Single Chain Plate
■
10 Serrated Saddle,
attached to the Plunger
using a Threaded Adaptor 1i ■
■
3 Collar Toe ■
Double Chain Plate 17
attached to the plunger using
■
17 Double Chain Plate,
attached to the Base
■
a Threaded Adaptor 1ii Attachment ■ 2 using a
Threaded Adaptor ■ 5
■
1i Threaded adaptor
■
4 Flat Base ■
18 Chain with Hook
www.enerpac.com 167
MS-Series, Maintenance Sets Hydraulic Technology Worldwide
Base/Collar/Plunger Attachments
CAUTION! When cylinders are used with maintenance set attach-
max.
50% ments or components, the maximum system pressure
must be limited to half the rated pressure (350 bar).
■
1 Threaded Adaptor
B
Note: All dimensions in millimetres. C A D
Set Model Number MS2-4 MSFP-5 MSFP-10 MS2-10 MS2-20 MS2-1020

Base/Collar/ ton Model Nr. A B C D
Plunger 2,5 tons 2,5 tons 5,0 tons 5,0 tons 12,5 tons 5-12,5 tons 3/4"- 16 UN 28 26 3/4"- 14 NPT
2,5 A-23
Attachments
5,0 A-13 1"- 8 UN 31 42 11/4"- 111/2 NPT
■1 A-23 A-23 A-13 A-13 A-28 A-13 / A-28 12,5 A-28 1 /2"- 16 UN 47 69 2"- 111/2 NPT
1
■2 A-25 A-25 A-21 A-21 A-27 A-21 / A-27

■3 A-1034 A-1034 A-20 A-20 A-595 A-20 / A-595 ■
2 Base Attachment
C
■4 MZ-4010 MZ-4010 A-14 A-14 A-243 A-14 / A-243

■5 A-545 A-545 A-10 A-10 — A-10 (2x) D A
■6 — — — A-8 — A-8 B
■7 A-530 A-530 A-6 A-6 — A-6
■8
ton Model Nr. A B C D
MZ-4011 — — A-192 — A-192 3/4"-
■9
2,5 A-25 14 NPT 50 12 44
— — — A-305 — A-305
11/4"- 111/2 NPT 57
■
5,0 A-21 12 65
10 A-531 A-531 A-18 A-18 — A-18
2"- 111/2 NPT 63
■
12,5 A-27 12 98
11 — — — A-185 — A-185
■
12 A-532 A-532 A-15 A-15 — A-15 ■
3 Collar Toe
C A
■
13 — — — — A-607 A-607
■
14 A-629 A-629 A-129 A-129 — A-129 B
■
15 A-539 A-539 A-128 A-128 — A-128 D
Chains and Attach- ton Model Nr. A B C D

ments for Pulling 2,5 tons 2,5 tons 5,0 tons 5,0 tons 12,5 tons 5-12,5 tons
2,5 A-1034 11/2"- 16 UN 54 50 31
■
16 A-558 — — A-132 A-238 A-132, -238 5,0 A-20 21/4"- 14 UN 80 57 57
■
17 — — — A-5 (2x) — A-5 (2x) 12,5 A-595 35/16"- 12 UN 103 51 80
■
18 A-557(2x) — — A-141(2x) A-218(2x) A-141 (2x) / ■
4 Flat Base A
A-218 (2x)
D
Tubes, Connectors
2,5 tons 2,5 tons 5,0 tons 5,0 tons 12,5 tons 5-12,5 tons C
and Adaptors B
■
19 A-544 A-19(2x) A-242(2x) A-19 (2x) / ton Model Nr.
3/4"-
A B C D
A-242 (2x) 2,5 MZ-4010 14 NPT 114 31 63
■
20 WR-5 WR-5 WR-5 A-92 — A-92 5,0 A-14 11/4"-111/2 NPT 165 35 88
■
21 MZ-4013(4x) MZ-4013 (4x) A-16(4x) A-16(4x) — A-16(4x) 12,5 A-243* 2"- 111/2 NPT 165 58 165
■
22 MZ-4007(3x) MZ-4007(3x) MZ-1050(2x) MZ-1050 (2x) — MZ-1050 (3x) * A-243 is a round base model
■
23 MZ-4008(2x) — — MZ-1051 — MZ-1051 (2x) ■
5 Threaded Connector
■
24 MZ-4009 MZ-4009 MZ-1052 MZ-1052 — MZ-1052
■
25 — — — A-285 — A-285 A A
■
26 A-650 — — — — — B
■
27 Length:76mm MZ-4002 MZ-4002 — — —
127mm MZ-4003 MZ-4003 MZ-1002 MZ-1002 — MZ-1002 ton Model Nr. A B
2,5 A-545 3/4"- 14 NPT 35
254mm MZ-4004 MZ-4004 MZ-1003 MZ-1003 A-239 MZ-1003
and A-239 5,0 A-10 11/4"- 14 NPT 41
457mm MZ-4005(2x) MZ-4005 MZ-1004 MZ-1004 A-240 MZ-1004 (2x)
and A-240
■
6 Lock-on Clamp Toe C A
584mm MZ-4006(2x) MZ-4006 — — — —

762mm — — MZ-1005 MZ-1005 A-241 MZ-1005 (2x) B
Ø 42,5 mm and A-241 D
■
28 Case CW-350 CW-350 CW-350 CW-350 CW-350 CW-350 ton Model Nr. A B C D
Weight 26 kg 20 kg 48 kg 63 kg 95 kg 158 kg 5,0 A-8 43 105 50 57
168
Universal Maintenance Sets, MS-Series
■
7 Threaded Plunger Toe C A ■
14 Wedge Head B ■
20 Spreader
A
D C A
B
C D B
D
ton Model Nr. A B C D ton Model Nr. A B C D ton Model Nr. A B C D

2,5 A-530 3/4"- 14 NPT 57 25 33 2,5 A-629 3/4"-14 NPT 69 33 28 1,0 WR-5 — 223 12,8 94
5,0 A-6 11/4"- 111/2 NPT 28 31 57 5,0 A-129 11/4"- 111/2 NPT 101 50 44 1,0 A-92 2 1/4"-14 UN 244 35 158
■
8 Collar Clamp Head ■
15 Rubber Flex-Head
B ■
21 Lock Pin B
A
A
B
A C
C D
ton Model Nr. A B
ton Model Nr. A B C D ton Model Nr. A B C 2,5 MZ-4013 7,9 41
3 "
2,5 MZ-4011 /4 -14 NPT 49 1 "
76 1 /2 -16 UN 2,5 A-539 3/4"- 14 NPT 44 69 5,0 A-16 11,2 82
■
5,0 A-192 42 63 50 21/4"-14 UN 5,0 A-128 11/4"- 111/2 NPT 86 86
22 Lock-on Connector
■
B
9 Spreader Toe B Chains and Attachments for Pulling
■
A
16 Single Chain Plate
A
D A C D
ton Model Nr. A B
C
ton Model Nr. A B C D 2,5 MZ-4007 19 79
B
5,0 A-305 11/4"-111/2 NPT 114 25 50 5,0 MZ-1050 33 127
ton Model Nr. A B C D
■
10 Serrated Saddle
B
2,5 A-558 11/2"-16 UN 196 39 44 ■
23 Male Lock-on Adaptor
5,0 A-132 21/4"-14 UN 307 63 79
C A
C A 12,5 A-238 35/16"-12 UN 450 102 125
■
B
17 Double Chain Plate
B C
ton Model Nr. A B C ton Model Nr. A B C
2,5 A-531 3/4"- 14 NPT 27 31 2,5 MZ-4008 3/4"- 14 NPT 60 19
D
5,0 A-18 11/4"- 111/2 NPT 38 50 A 5,0 MZ-1051 11/4"-111/2 NPT 90 33
■
11 Smooth Saddle
B
ton Model Nr. A B C D ■
24 Female Lock-on Adaptor
5,0 A-5 11/4"-111/2 NPT 130 50 126
C A C A
■
18 Chain with Hook
B
ton Model Nr. A B C ton Model Nr. A B C

5,0 A-185 11/4"-111/2 NPT 38 50 2,5 MZ-4009 3/4"- 14 NPT 65 19
■
5,0 MZ-1052 11/4"- 111/2 NPT 96 33
12 90° V-Base ton Model Nr. Chain Length
C B 2,5 A-557 1,5 metres ■
25 Adjustable Extension
A D 5,0 A-141 1,8 metres B
12,5 A-218 2,4 metres D A

C
ton Model Nr. A B C D Tubes, Connectors and Adaptors
3/4"- 14 NPT
■
2,5 A-532 38 47 25 ton Model Nr. A B C D
19 Pipe Coupling
5,0 A-15 11/4"-111/2 NPT 54 57 54 B 5,0 A-285 11/4"-111/2 NPT 335 441 33
■
13 Plunger Base C A ■
26 Slip-Lock Extension
B
A A
ton Model Nr. A B C
C
2,5 A-544 3/4"-14 NPT 42 33
ton Model Nr. A B C 5,0 A-19 11/4"- 111/2 NPT 49 54 ton Model Nr. A B C
3/4"- 14 NPT
12,5 A-607 2"- 111/2 NPT 166 38 12,5 A-242 2"- 111/2 NPT 88 82 2,5 A-650 200 365
www.enerpac.com 169
SP-Series, Lightweight Hydraulic Punch Hydraulic Technology Worldwide
Shown: SP-35S
Much Faster than

Drilling
Tool Kit SPK-10

Included with all 35 Ton
punches, this tool kit is used
to remove and install the
punch into the head.
Can be ordered as a replacement under
model number SPK-10.
Ordering Information
The 35 ton hydraulic Punch
may be ordered by itself or
as a set, including a pump.
A punch or die may also be
• 12,7 mm thick capacity through mild steel ordered separately or as a matched set.
Please refer to the Quick Selection Chart
• Round, oblong and square punches and dies are available information on top of the next page.
to solve your punching applications
• Long life Enerpac single-acting, spring return design
• Durable steel case keeps tools and dies together and
provides for easy carrying and storage STANDARD PUNCHES AND DIES
• CR-400 coupler included SELECTION CHART
Hole Imperial** Metric**

Shape
Hole Size Bolt Hole Size Bolt

Size Size
(inch) (inch) (mm) (mm)
0,31 1/4 7,9 –
0,38 5/16 9,5 M8
0,44 3/8 11,1 M10
0,53 7/16 13,5 M12
0,56 1/2 14,3 –
0,69 5/8 17,5 M16
0,78 – 19,8 M18
0,81 3/4 20,6 –
0,31 1/4 7,9 –
0,38 5/16 9,5 M8
0,44 3/8 11,1 M10
0,50 7/16 12,7 M12
0,31x0,75 1/4 7,9x19 –
This PUD-1100E Economy 0,38x0,75 5/16 9,5x19 M8
Electric Pump is available 0,44x0,75 3/8 11,1x19 M10
as a matched set with the
0,50x0,75 7/16 12,7x19 M12
35 ton punch.
** Material thickness should not exceed

hole diameter
170
Single-Acting, Spring Return Hydraulic Punch
Included Model
MSP,
*
;;;
Punch & Pump Hose Gauge Gauge
Number
SP,
;;;
Die Set Adaptor

STP
(kg) Series
SP-35 Standard** P-392 HC-7206 GP-10S GA-2 STP-35H 25
SP-35 Standard** PATG-1102N HC-7206 GP-10S GA-2 STP-35A 29
SP-35 – – – – – SP-35 16 Capacity:
SP-35 Standard** – – – – SP-35S 18 35 ton
SP-35 Standard** PUD-1100E HC-7206 – – SP-35SPE 29
SP-35 Metric*** – – – – MSP-351 21 Hole Sizes:
SP-35 Metric*** PUD-1100E HC-7206 – – MSP-351PE 32 7,9 - 20,6 mm
* Punch oil capacity: 76 cm3
Includes the following punch and die sets: Maximum Operating Pressure:
** SPD-438, SPD-688, SPD-563 and SPD-813
*** SPD-375, SPD-531, SPD-438 and SPD-688
700 bar
ø 97 113 CAUTION!
The chart below is for
3/8"- reference only! Maximum
18NPTF allowable material thickness
to be punched varies with
set wear.
348
50 25
16
72
ø6
85 47 68
95 223
Standard Maximum allowable material thickness to be

Punch & punched (mm)
Die Set
Model Numbers 1 ) 2) 3) 4 ) 5) 6) )
7 8 ) 9) )
10 11)
SPD-313 7,9 7,9 6,4 6,4 6,4 6,4 3,3 4,8 6,4 6,4 6,4
SPD-375 9,7 9,7 7,9 7,9 7,9 7,9 4,8 6,4 7,9 7,9 7,9
SPD-438 11,2 11,2 9,7 9,7 9,7 7,9 4,8 7,9 7,9 7,9 7,9
SPD-531 12,7 12,7 11,2 11,2 11,2 9,7 6,4 7,9 9,7 9,7 9,7
SPD-563 12,7 12,7 12,7 11,2 12,7 11,2 6,4 9,7 11,2 11,2 11,2
SPD-688 12,7 12,7 12,7 11,2 12,7 10,2 6,4 7,9 10,2 10,2 10,2
Steel Qualities (see table):
SPD-781 12,7 12,7 12,7 11,2 12,7 9,7 6,4 7,9 9,7 9,9 9,7
1) Mild A-7
SPD-813 12,7 12,7 12,7 11,2 12,7 7,9 4,8 7,9 7,9 7,9 7,9
2) Boiler Plate
SPD-458 7,9 7,9 6,4 6,4 6,4 6,4 3,3 4,8 6,4 6,4 6,4 3) Structural A-36
SPD-549 9,7 9,7 7,9 7,9 7,9 7,9 4,8 6,4 7,9 7,9 7,9 4) Struct Corten (ASTM A242)
SPD-639 11,2 11,2 9,7 9,7 9,7 7,9 4,8 7,9 7,9 7,9 7,9 5) Cold Rolled C-1018
SPD-728 12,7 12,7 11,2 11,2 11,2 9,7 6,4 7,9 9,7 9,7 8,6 6) Hot Rolled C-1050
SPD-106 7,9 7,9 6,4 6,4 6,4 6,4 3,3 4,8 6,4 6,4 6,4 7) Hot Rolled C-1095
8) Hot Rolled C-1095 Annealed
SPD-125 9,7 9,7 7,9 7,9 7,9 7,9 4,8 6,4 7,9 7,9 7,9
9) Stainless Annealed
SPD-188 11,2 11,2 9,7 9,7 9,7 7,9 4,8 7,9 7,9 7,9 7,9 10) Stainless 304 Hot Rolled
SPD-250 12,7 12,7 11,2 11,2 11,2 9,7 6,4 7,9 9,7 9,7 9,7 11) Stainless 316 Cold Rolled
www.enerpac.com 171
Hydraulic Vertical Lifting Wedge Hydraulic Technology Worldwide
LW-16 with SB-2 and optional LWB-1

LW
Series
Maximum Lifting Force:
16 ton
Lifting Stoke:
21 mm
Tip Clearance / Maximum Spread*:
10 mm / 81,5 mm
700 bar
Split-Flow Manifolds
Split Flow Valves to control
two or four lifting wedges
simultaneously.
AM-21 with 3 ports 3/8” NPTF

AM-41 with 5 ports 3/8” NPTF.
Page: 124
• Requires very small access gap of only 10 mm
• Lifting force 16 ton at 700 bar hydraulic pressure Best Match Hand Pump
• Each step can spread under full load To power your Enerpac
Lifting Wedge, the Enerpac
• Straight vertical lifting P-392 Hand Pump or
• Unique interlocking wedge design: no first step bending P-392FP Foot Pump is an
and risk of slipping out ideal choice.
• Single-acting, spring return cylinder

Page: 68
• Lifting wedge LW-16 includes safety block SB-2
• Includes RC-Series Cylinder with CR-400 coupler
Collapsed Height
30,5
23,5
16,5
10,0
100
110
For lifting heavy equipment with minimum floor
clearance the LW-16 is the ideal tool. 15 (4x)
Extended Height
51,5
210
44,5
37,5
30,5
121
68 45 247
Maximum Lifting Model Tip Maximum Oil

Lifting Stroke Number Clearance Operating Capacity
Force Pressure
ton (kN) (mm) (mm) (bar) (cm3) (kg)
16 (157) 21 LW-16 10 700 78 9,0
Use optional stepped block LWB-1 to increase wedge lifting height by 30 mm.
* Using LWB-1.
172
Hydraulic Machine Lifts
Shown: SOH-10-6
SOH
Series
Lifting Capacity:
8,5 - 20 ton
Stroke:
136-157 mm
Toe Clearance:
20 mm
700 bar
Load Skates
In combination with the
Enerpac Machine Lifts we
recommend Load Skates for
moving heavy loads.
Page: 174
• For lifting heavy equipment with minimum available access Best Match Hand Pump
• Separate hydraulic pump enhances safety To power your Enerpac
Machine Lift, the Enerpac
• Low height lifting toe P-392 hand pump is an ideal
• Precision guided to reduce friction and isolate cylinder choice.
from side-loads
• Two extendible support feet provide extra stability Page: 68
• Includes RC-Series Cylinder with CR-400 coupler
C
K
D
K A3
A2
A1
H J F
Capacity Toe Clearance (mm) Stroke Model Oil Dimensions (mm)

Number Capacity
Total Ext. Total Body
ton Minimum Central Maximum Height Height
(kN) A1 A2 A3 (mm) (cm3) C D F H J K (kg)
8,5 (75) 20 95 169 136 SOH-10-6 224 430 294 – 190 214 74 26
20 (178) 30 110 190 157 SOH-23-6 525 472 320 65 265 250 80 45
www.enerpac.com 173
ER-Series, Heavy Duty Load Skates Hydraulic Technology Worldwide
Shown: Set ER-20
Move Heavy Loads

Easily and Safely
Sets (see table) include all

components necessary to
handle a variety of
applications.
Two ELB-1 link-up bars, two
ERH-1 handles (880 mm long) and one
EMB-1 metal box are included.
Optional long handle ERH-2 (1295 mm)

available for 60 and 80 ton only.
Lifting Wedge and Machine

Lifts
• Rugged and sturdy construction for long life
To place the Load Skates,
• Low profile construction for increased stability the load must first be lifted.
• Low rolling-resistance allows for easy transportation This can be done easily and
safely using the Enerpac Lifting Wedge
• Attachable load leveling plates and swivel turntables or Machine Lifts.
for turning corners
Page: 172
Load Skates may be ordered separately or as a matched set.
Set Set Model Load Skates Turntable Swivels Leveling Plates Weight
Capacity* Number (4) (2) (2) Including
handles
and
metal
box
ton (kN) (kg)

20 (178) ERS-20 ER-10 ES-10 ELP-10 49
30 (267) ERS-30 ER-15 ES-15 ELP-15 55
60 (533) ERS-60 ER-30 ES-30 ELP-30 75
* Sets are designed to enable two skates to take full load for extra safety
on uneven floor surfaces
Heavy transport using Load Skates.

The machine is first lifted, using
SOH-Series Enerpac Machine Lifts.
174
Heavy Duty Load Skates
EL/
A B
ER/
C
ES
Series
D F E
ER-1, ER-10, ER-15, ER-30 Maximum Carrying Capacity:

A B 80 ton
D F E
ER-60, ER-80
A
A A
B D B D B E B
D
C C C
C
A
Turntable Swivel Turntable Swivel Leveling Plate Leveling Plate

ES-1, ES-10, ES-15, ES-30 ES-60, ES-80 ELP-10 ELP-60
ELP-15 ELP-80
ELP-30
Capacity* Model Dimensions (mm) Contact Rollers

Number Rolls per per
ton (kN) A B C D E F Skate Skate (kg)
Load 1 (8,9) ER-1 160 100 65 18 51 4 4 11 3,8
Skates 10 (89) ER-10 210 100 66 18 51 6 5 15 5,2
15 (133) ER-15 220 113 75 24 60 10 4 13 7,3
30 (267) ER-30 270 130 92 30 68 10 4 13 13,0
60 (533) ER-60 380 168 125 42 76 16 4 13 31,9
80 (711) ER-80 530 182 145 50 86 19 6 17 60,9
Turntable 1 (8,9) ES-1 207 86 26 90 – – – – 1,1
Swivel 10 (89) ES-10 220 73 42 130 – – – – 3,7
15 (133) ES-15 220 86 42 130 – – – – 3,7
30 (267) ES-30 250 96 48 150 – – – – 5,3
60 (533) ES-60 275 114 61 190 – – – – 13,7
80 (711) ES-80 360 128 61 220 – – – – 18,9
Leveling 10 (89) ELP-10 149 73 42 120 – – – – 3,7
Plate 15 (133) ELP-15 149 86 42 120 – – – – 3,7
30 (267) ELP-30 178 96 48 130 – – – – 5,3
60 (533) ELP-60 270 114 61 180 – – – – 13,8
80 (711) ELP-80 350 128 61 200 – – – – 18,8
www.enerpac.com 175
Industrial Storage Cases Hydraulic Technology Worldwide
CM-16
CM
Series
Case Size:
19 - 453 litres
Protect your
Equipment
• Protect your equipment from dust, water, grease and dirt

• Reduce losses on the jobsite, maintenance area or shop
• Durable steel, painted with rust-resistant primer and
finished in durable enamel
• Heavy duty hinges and lifting handles
When not storing the lifting system, this heavy-duty

storage case doubles as a work station.
Case Model Dimensions Thickness

Size Number LxWxH
(litres) (mm) (mm) (kg)

19 CM-6 597 x 178 x 178 0,9 7
32 CM-1 635 x 292 x 168 0,9 8
127 CM-4 787 x 457 x 355 1,5 16
212 CM-7 1206 x 381 x 457 1,9 57
453 CM-16 1219 x 609 x 609 1,5 55
176
Hydraulic Wedgie and Spread Cylinders
Shown from top to bottom: WR-15, A-92, WR-5
A, WR
Series
Capacity:
0,75 -1 ton
Tip Clearance:
12,8-35 mm
Maximum Spread:
292 mm
700 bar
RC-Series Cylinders
10 ton RC-Series cylinders
(except RC-101) fit into A-92
Spreader Attachment.
• WR-5: For use in very confined work areas
• WR-15: For long stroke spreading applications Page: 8
• A-92: Spreader attachment; threads on RC-Series 10 ton Best Match Hand Pump
cylinders (except RC-101) To power your Wedgie and
Spreader Attachment the
P-392 hand pump is an ideal
choice.
Page: 68
244
549
3/8"- 69 50
18NPTF
51 94 32
21/4"-14UNS
51 157 292 35
56 42
28 12,8 51 91 158
223 3/8"-
18NPTF
WR-5 WR-15 A-92
Cylinder Tip Model Maximum Cylinder Oil

Capacity Clearance Number Spread Effective Capacity
Area
ton (kN) mm (mm) (cm2) (cm3) (kg)
A WR-5 wedgie
1 (8,9) 12,8 WR-5 94 6,5 10,0 2,3 cylinder is used to
0,75 (6) 32 WR-15 292 14,5 64,1 11,3 position a concrete
block on a
1 (8,9) 35 A-92 158 – – 3,6 construction site.
www.enerpac.com 177
Hydraulic Cutterheads Hydraulic Technology Worldwide
Shown from left to right: WHC-4000, WHC-750

WHC, WHR, STC
Series
Capacity:
3 - 20 ton
Cutting Capacity:
12- 101 mm
700 bar
Tool Sets
Cutterheads marked
*
as sets (pump, tool,
gauge, couplers and
hose) for your ordering convenience.
Cutterhead Pump Set Model
Modelnr. Modelnr. Number
WHC-750 P-392 STC-750H
WHC-750 P-392FP STC-750FP
WHC-750 PATG-1102N STC-750A
WHC-1250 P-392 STC-1250H
• Single-acting, spring return on all models, except WHR-1250 WHC-1250 P-392FP STC-1250FP
• Guillotine action for easy operation WHC-1250 PATG-1102N STC-1250A
• Lifting handles on larger models for easy transport
• Carrying bag included for easy carrying and tool protection Steel rope is easily cut with the smooth
• Ideal for use with most Enerpac pumps featuring 3-way valve guillotine action of an Enerpac cutterhead.
or dump valve and 700 bar pressure rating (except WHR-1250,
which requires 4-way valve)
Selection Chart Maximum Cutting Capacities (ø in mm)
Cutter Capa- Model Oil Length Steel Round Bar Wire Strand Cable Replace-
Head city Number Capa- Wire ment
Operation city Rope, Copper Alumi- Soft Rein- Bare Bare ACSR Guy Tele- Under- Blades
Hemp- Wire or nium Steel forcing Copper Alumi- Steel phone ground
core Bar Wire or Bolts Bar Wire nium Wire Cable Cable
or Bar Strands Wire Strands CPP (Power)
IWRC Strands
6x7
6x12 1x7
ton (cm3) (mm) 6x19 6x7 1x19 (kg)
4 WHC-750* 19,7 127 19 19 19 19 12 19 19 19 16 3,2 WCB-750
20 WHC-1250* 134,4 279 31 28 31 28 25 31 31 31 22 11,3 WCB-1250
Single-
13 WHC-2000 119,6 381 25 31 31 22 50 50 50 19 50 10,4 WCB-2000
Acting
3 WHC-3380 65,5 482 41 42 85 85 9,1 WCB-3380
8 WHC-4000 137,7 609 101 101 14,5 WCB-4000
Dbl.-Act. 20 WHR-1250 122,9 419 31 31 31 28 25 31 31 31 22 11,8 WCB-1250
* Available in sets with P-392 Hand Pump, P-392FP Foot Pump or PATG-1102N Turbo Air Pump. Will not cut designated material
178
Self-Contained Hydraulic Cutters
Shown from left to right: WMC-2000, WMC-750
WMC
Series
Capacity:
3 - 20 ton
Cutting Capacity:
14 - 85 mm
700 bar
Replacement Blades
60-62HRc hardened
replacement blades.
For Cutter Order Blades

Model Number Model Number
WMC-580 WCB-580
• Rotating heads for operator convenience WMC-750 WCB-750
• Guillotine action for easy operation WMC-1000 WCB-1000
WMC-1250 WCB-1250
• Carrying bag included for easy carrying and tool WMC-1580 WCB-1580
protection WMC-2000 WCB-2000
• Velcro straps to secure handles on larger models for easy WMC -3380 WCB-3380
carry
• Spring return for easy operation CAUTION!: A “” in the charts
on these pages means that this
• Light weight self-contained tool, can be used anywhere hydraulic cutter is not designed
to cut this size or type of
material. Any attempt to do so may result in
personal injury and damage to the unit and
will void the warranty.
Selection Chart Maximum Cutting Capacities (ø in mm)
Capa- Model Length Steel Round Bar Wire Strand Cable

city Number Wire
Rope, Copper Alumi- Soft Rein- Bare Bare ACSR Guy Guy Tele- Under-
Hemp- Wire or nium Steel forcing Copper Alumi- Wire Steel Steel phone ground
core Bar Wire or Bolts Bar Wire nium Strands Wire Wire Cable Cable
or Bar Strands Wire Strands Strands CPP (Power)
IWRC Strands
6x7
6x12
ton (mm) 6x19 6x7 1x7 1x19 (kg)
4 WMC-580 381 16 16 16 16 16 16 16 14 14 16 3,6
4 WMC-750 381 19 17 17 17 19 19 19 14 14 17 3,6
20 WMC-1000* 679 19 19 19 19 11,3
20 WMC-1250 679 31 28 31 31 22 31 31 31 22 25 10,4
6 WMC-1580 558 19 19 19 19 38 41 41 16 16 41 6,8
13 WMC-2000 628 25 31 31 22 50 50 50 19 19 50 10,9
3 WMC-3380 660 46 42 85 85 10,0
* Cuts 12 mm alloy chain grade 70 (type G7 transport or tie-down) or grade 80 (for overhead lifting applications) Will not cut designated material
www.enerpac.com 179
STB-Series, Pipe Bender Sets Hydraulic Technology Worldwide
Shown: STB-101H
Quick, Safe and

Wrinkle-free
Bending
‘One Shot’ and ‘Sweep’

One shot shoes give up to a 90°
bend without resetting.
Sweep shoes are used where increasing
radii are required for multiple parallel pipe
installations.
• Makes smooth, wrinkle-free bends

• Sets include genuine Enerpac cylinder, hose and manual, air or
electric pump
• Sets are also available without hydraulics
• Bending shoes and bending frame are lightweight, heat-treated
aluminium
• All sets include sturdy steel storage case
• All sets include BZ-12091 angle indicator for accurate bending
• BZ-12377 Shoe Lock Pin included in every set
• Eject-O-Matic™ benders (STB-202 models) have double-acting
cylinder to eject pipe from the bending shoe Typical one shot bending operation.
SELECTION CHART
Pipe Range Set Hand Air Electric Cylinder* Hose* Saddle*

Nominal Size Model Pump* Pump* Pump*
(inch) Number
One Sweep
Shot (kg)
STB-101X – – – – – - A-12 40
STB-101N – – – – RC-1010 HC-7206 A-12 48
1/2 - 2 – STB-101H P-392 – – – RC-1010 HC-7206 A-12 52
STB-101A – PATG-1102N – – RC-1010 HC-7206 A-12 54
STB-101E – – PUJ-1200E 2) – RC-1010 HC-7206 A-12 57
STB-221X – – – – – - A-29 104
1-2 2 1/2 - 4 STB-221N – – – – RC-2510 HC-7206 A-29 119
STB-221H P-80 – – – RC-2510 HC-7206 A-29 130
STB-202X1) – – – – – - A-29 143
1 1/4 - 4 – STB-202N1) – – – – RR-3014 HC-7206 (2x) A-29 174
STB-202E1) – – – ZU4408SE 2) RR-3014 HC-7206 (2x) A-29 212
* See corresponding sections in this catalog for more detailed specifications.
1) Eject-O-Matic™ 2) For 115 volt applications replace the last digit of Set Model Number and pump from ‘E’ to ‘B’.
180
Pipe Bender Sets
Nominal Wall Sche- Pipe STB-101 STB-221 STB-202 One Shot Sweep
Pipe Thick- dule Bend Bending Bending STB
Size ness Pipe * Inside
Radius
ø1-2
One Shot
Shoe
Model
Shoe
Model
Series
ø 1/2 - 2 ø2 1/4 - 4 ø 1 1/4 - 4 Number Number
(inch) (mm) (inch) One Shot Sweep One Shot
2,8 40 Yes Yes WS
1/2
3,7 80 Yes Yes WS
2 7/8 BZ-12011 –
4,7 160 WS WS WS
7,5 DEH WS WS WS
Nominal Pipe Size:
2,9 40 Yes Yes WS
3,9 80 Yes Yes WS
1/2 - 4 inch
3/4 4 BZ-12021 –
5,5 160 WS WS WS Maximum Bending:
7,8
3,4
DEH
40
WS
Yes
WS
Yes
WS
WS
90°
4,5 80 Yes Yes WS Maximum Operating Pressure:
1 5 1/8 BZ-12031 –
6,4 160 WS WS WS 700 bar
9,1 DEH – WS WS
3,6 40 Yes Yes Yes
4,9 80 Yes Yes Yes
1 1/4 6 7/16 BZ-12041 –
6,4 160 WS WS Yes
8,7 DEH – WS WS
3,7 40 Yes Yes Yes
5,1 80 Yes Yes Yes
1 1/2 7 5/16 BZ-12051 –
7,1 160 WS WS Yes
10,2 DEH – WS WS
3,9 40 Yes Yes Yes
2 5,5 80 8 5/16 Yes Yes Yes BZ-12061 –
8,7 160 – WS Yes
5,2 40 – Yes Yes
2 1/2 7,0 80 9 1/2 – WS Yes BZ-12341 BZ-12382
9,5 160 – WS Yes
5,5 40 – Yes Yes
3 11 1/4 BZ-12351 BZ-12383
7,6 80 – WS Yes
5,7 40 – Yes Yes
3 1/2 15 1/2 BZ-12391 BZ-12384
8,1 80 – WS Yes
6,0 40 – Yes Yes Steel pipe is quickly and safely bent up to
4 17 3/4 BZ-12392 BZ-12385
8,6 80 – – Yes 90° using the STB-101H Pipe Bender Set.
*Schedule Pipe: 40 = Standard; 80 = Extra Heavy; 160 = Double Extra Heavy;
DEH = Double Extra Heavy (slightly thicker than 160);
WS = Can be bent using wider spacing for swivel shoes.
Frame Pivot Pivot Bending Shoes included Set

Assembly Pin Shoes (Shoes with 3) are Sweep, all other shoes are One Shot) Model
Number
STB-101X
STB-101N
BZ-12371 BZ-12375 BZ-12071 BZ-12011 BZ-12021 BZ-12031 BZ-12041 BZ-12051 BZ-12061 – – STB-101H
STB-101A
STB-101E
STB-221X
BZ-12372 BZ-12376 BZ-13401 BZ-12031 BZ-12041 BZ-12051 BZ-12061 BZ-123823) BZ-123833) BZ-123843) BZ-123853) STB-221N
STB-221H
STB-202X1)
BZ-12374 BZ-12376 BZ-13401 - BZ-12041 BZ-12051 BZ-12061 BZ-12341 BZ-12351 BZ-12391 BZ-12392 STB-202N1)
STB-202E1)
www.enerpac.com 181
Post Tensioning Tools for Mono-Strands Hydraulic Technology Worldwide
Shown: PT20-5SS, DPT20-5PS
Field-proven Tools
feature “soft-grip”
handles
ZU4-Series Electric Pumps

Specifically designed to
operate with the most
popular lines of stressing
jacks, the ZU4-Series Pumps
have the features, performance and
options that are required for use in post-
tensioning markets.
Page: 86
• "Soft-grip", durable, field-proven designs, with ergonomic

handles to help reduce operator fatigue
▼ Designed to be tough, the ZU4-Series with
• Single-acting PT models, with spring-seating and optional steel reservoirs will take the abuse of today’s
power-seating are equipped with the new Enerpac RC construction sites.The ZU4908JE is the ideal
Post-tensioning cylinders with a 254 mm stroke; ideal for pump for post tensioning applications.
slab-on-grade applications
• Double-acting DPT models have an 216 mm stroke and are
machined from a steel billet; feature standard power-
seating and “gun-drilled” internal hydraulic passages
• All jacks have a standard 3" nose assembly; 6" nose
assemblies are available as accessories for all models
• A full line of grippers is available to tension 3/8”, 7/16", 1/2"
and .6" strand diameters
• Complete offering of Enerpac parts and soft kits allow
quick and easy service
SELECTION CHART
Strand Tensioning Stroke Hydraulic Model Seater Oil Tool
Diameter Capacity Tool Number Type Capacity Effective
Range at 700 bar Operation Area
(inch) ton (kN) (mm) (cm3) (cm2) (kg)
254 Single-Acting PT20-5SS Spring 743 28,9 25

3/8 - 1/2 20 [201] 254 Single-Acting PT20-5PS Power 743 28,9 25
216 Double-Acting DPT20-5PS Power 869 34,2 19
254 Single-Acting PT30-6SS Spring 1029 40,5 34
3/8 - .60 30 [295] 254 Single-Acting PT30-6PS Power 1029 40,5 34
216 Double-Acting DPT30-6PS Power 1108 51,3 24
182 www.enerpac.com
Post Tensioning Tools for Mono-Strands
Mono-Strand Tensioning Tool Operational Sequence
This diagram shows the sequence of operation for the DPT20-5PS tool.
PT,
The operation of the single-acting, spring-seat models is very similar. DPT
Series
Installation Pulling Tendon Seating Wedge Retraction
Tensioning Capacity:
Free
State
20 - 30 ton
Strand Diameters:
3/8 - 7/16 -1/2 - .60 inch
Stroke:
216 - 254 mm
Typical Mono-Strand system set-up
ZU4908KE-T Electric Pump, features back-lit LCD and
700 bar
pressure transducer options and the VM43-LPS manual
valve for power-seating.
Hoses
DPT20-5PS Stressing Jack, used for power-seat Page: 120

applications of 1/2 inch strand.
Gauges
Dimensions (mm) 3/8"-18NPTF overloading and ensure long,
Model Nr. A B C dependable service from
PT20-5SS 533 228 165 B your equipment. Refer to the
PT20-5PS 533 228 165 System Components Section for a full
DPT20-5PS 469 190 165 range of gauges..
PT30-6SS 558 259 177 C Page: 126
PT30-6PS 558 259 177
A
DPT30-6PS 469 215 165
Optional and Replacement Accessories Selection Chart

Used with 3” Nose 3” Wedge 6” Nose 6” Wedge 3/8" Dia. 7/16" Dia. 1/2" Dia. .6" Dia. Gripper Gripper Handle
Jack Seater Seater Gripper Set Gripper Set Gripper Set Gripper Set Handle Plate
PT20-5SS PT-NP3 PT-WS3 PT-NP6 PT-WS6 PT-GS375 PT-GS438 PT-GS500 – PT-RGH PT-GRP PT-HG
PT20-5PS PT-NP3 PT-WS3 PT-NP6 PT-WS6 PT-GS375 PT-GS438 PT-GS500 – PT-RGH PT-GRP PT-HG
DPT20-5PS DPT-5NP3 DPT-5WS3 DPT-5NP6 DPT-5WS6 DPT-5GS375 DPT-5GS438 DPT-5GS500 – DPT-RGH DPT-GRP PT-HG
PT30-6SS PT-NP3 PT-WS3 PT-NP6 PT-WS6 PT-GS375 PT-GS438 PT-GS500 PT-GS594 PT-RGH PT-GRP PT-HG
PT30-6PS PT-NP3 PT-WS3 PT-NP6 PT-WS6 PT-GS375 PT-GS438 PT-GS500 PT-GS594 PT-RGH PT-GRP PT-HG
DPT30-6PS DPT-6NP3 DPT-6WS3 DPT-6NP6 DPT-6WS6 DPT-6GS375 – DPT-6GS500 DPT-6GS594 DPT-RGH DPT-GRP PT-HG
www.enerpac.com 183
Enerpac Bolting Tools Hydraulic Technology Worldwide
E NERPAC offers a comprehensive range of Torque Wrench Pump

Selection Matrix
bolting tools suited to a wide variety of industries For optimum speed and
performance see the torque
and applications.
wrench and pump matrix.
Rigid steel and lightweight aluminium hydraulic
Page: 206
torque wrenches and torque wrench pumps, nut
splitters, flange spreaders and alignment tools… Torque Wrench Hoses
Enerpac has the professional tools to complete Use Enerpac THQ- and THC-
Series hoses with double-
your most difficult bolting jobs with the degree of acting torque wrenches to
ensure the integrity of your
safety and accuracy demanded in today’s work hydraulic system.
environment. Page: 206
Hexagon Bolt and Nut Sizes

See the table for hexagon sizes
of bolts, nuts and related thread
diameters.
Page: 216
184
Bolting Tools & Pumps Section Overview
Capacity Tool type and functions Series Page

ton (kN)
5 - 90 Hydraulic Nut Splitters NC 186

(45 -801) Nut Splitter-Pump Sets STN
5 - 10 Hydraulic Flange Spreaders FS 187

(45-101) Flange Spreader-Pump Sets STF
14 (125) Hydraulic Wedge Spreaders and Sets FSH, 188

8 (72) Mechanical Wedge Spreaders
FSM
STF
0,3 - 3,0 Flange Alignment Tools ATM 189
(3 -27) Mechanical & hydraulic
1898 - 34.079 Nm Square Drive Torque Wrenches S 190

1400 - 25.150 Ft.lbs Rigid steel design & maximum versatility
2350 - 27.000 Nm Square Drive Torque Wrenches SQD 194

1735 - 19.875 Ft.lbs Lightweight aluminium power wrench
2712 - 20.337 Nm Hexagon Torque Wrenches W 198

2000 - 15.000 Ft.lbs Rigid steel design & low profile
3290 - 24.210 Nm Hexagon Cassette Torque Wrenches HXD, 202

2425 - 17.860 Ft.lbs Lightweight aluminium & low profile CC
Torque Wrench Pumps Selection Matrix 206

Power HydraulicTorque Wrench Pumps Maximum Oil Flow at Power Pump Series
Source Reservoir maximum Consumption
Size pressure
Compact Economy 3,0 0,34 0,37 PME, 208

Portable (litres) (l/min) (kW)
PMU
Electric
Submerged motor 3,8 0,70 1,80 PTE 209

Portable (litres) (l/min) (kW)
Z-Class innovation 8,0 0,90 1,25 ZU4T 210

Tough, dependable, innovative (litres) (l/min) (kW)
Portable 8 0,33 1130 PTA 214

Air Driven
(litres) (l/min) (l/min air)
High Flow 8 1,80 3900 PMA 215

(litres) (l/min) (l/min air)
www.enerpac.com 185
Hydraulic Nut Splitters Hydraulic Technology Worldwide
Shown from left to right: NC-3241, NC-1319, NC-1924

NC, STN
Series
Capacity:
5 - 90 ton
Bolt Range:
M6 - M48
700 bar
Tool and Pump

Sets
Hydraulic Nut
Splitters are
available as sets (pump, tool, gauge,
gauge adaptor, couplers and hose) for
your ordering convenience.
Nut Splitter Handpump Set Model

• Compact and ergonomic design, easy to use Modelnr. Modelnr. Number
• Unique angled head design NC-1924 P-392 STN-1924H

NC-2432 P-392 STN-2432H
• Single-acting, spring return cylinder
NC-3241 P-392 STN-3241H
• Heavy duty chisels can be reground
• Applications include service trucks, piping industry, tank
cleaning, petrochemical, steel construction, mining, etc.
C
3/8"-18NPTF
Easily removing rusty F

nuts during railroad H
construction is just one
of many application D
examples for the B
Enerpac Nut Splitter.
Nut Bolt Range Hexagon Capa- Oil Model Dimensions (mm) Replacement
Splitters Nut Range city Capa- Number Chisel
include a city Model
spare chisel, a (mm) (mm) ton (cm3) A B C D F H (kg) Number
spare set screw M6-M12 10 - 19 5 15 NC-1319 40 170 7 19 28 48 1,2 NCB-1319
and the wrench M12-M16 19 - 24 10 20 NC-1924* 54 191 10 26 40 62 2,0 NCB-1924
used to secure the M16-M22 24 - 32 15 60 NC-2432* 64 222 13 29 51 72 3,0 NCB-2432
chisel. A CR-400
M22-M27 32 - 41 20 80 NC-3241* 75 244 17 36 66 88 4,4 NCB-3241
coupler is
standard. M27-M33 41 - 50 35 155 NC-4150 94 288 21 45 74 105 8,2 NCB-4150
M33-M39 50 - 60 50 240 NC-5060 106 318 23 54 90 128 11,8 NCB-5060
M39-M48 60 - 75 90 492 NC-6075 156 393 26 72 110 181 34,1 NCB-6075
* Available as Tool-Pump Set, see note on this page.
Ordering Notes: Maximum allowable hardness to split is HRc-44. Not to be used on square nuts.
186
Hydraulic Flange Spreaders
Shown: FS-56
FS, STF
Series
Capacity:
5 - 10 ton
Spread:
70 - 216 mm
700 bar
Tool and Pump

Sets
Both Flange
Spreaders are available as
sets (pump, tool, gauge,
gauge adaptor, couplers and
hose) for your ordering convenience.
Spreader Pump Set Model

Modelnr. Modelnr. Number
FS-56 P-392 STF-56H
• Lightweight, ergonomic design for ease of use FS-109 P-392 STF-109H
• Adjustable jaw widths from 70 mm to 216 mm for a wide FS-109 PATG-1102N STF-109A
range of applications
• Single-acting, spring return RC-Series cylinders for fast Wedge Spreaders
trouble-free operation
Friction-free, smooth and
parallel wedge movement
with unique interlock wedge
design. Eliminates flange
damage and risk of spreading arm
failure.
B
Page: 188
A
Flange Spreader Matching Chart
ASA Pipe Size (mm)
Rating
(bar) FS-56 FS-109
E 10 127 - 508 558 - 1066

20 63 - 355 406 - 711
H
27 63 - 304 355 - 609
35 63 - 254 304 - 508
F D
62 12 - 152 203 - 406
J
103 12 - 88 101 - 203
C
I 172 12 - 63 76 - 101
Maximum Stud Standard Capa- Stroke Oil Model Dimensions (mm)

Flange Size Wedge city Capa- Number
C
Thickness city
(mm) (mm) (mm) ton (mm) (cm3) A B Min. Max. D E F H I J (kg)
2 x 57 19 - 28 3 - 28 5 38 24,6 FS-56* 76 209 70 155 32 196 88 25 206 19 11,5
2 x 92 31 - 41 3 - 28 10 54 78,7 FS-109* 108 279 104 216 50 152 114 38 273 31 18,1
* Available as Tool-Pump Set, see note on this page.
www.enerpac.com 187
Hydraulic and mechanical Wedge Spreaders Hydraulic Technology Worldwide
▼ FSH-14 and FSM-8 with safety blocks SB-1

FSH, FSM, STF
Series
Tip Clearance / Maximum Spread*:
6 mm / 81 mm
Maximum Spread Force:
8 - 14 ton
700 bar (FSH-14)
Stepped Blocks FSB-1

Use stepped blocks to
increase wedge opening
upto 81 mm. Fits both
FSH-14 and FSM-8.
• For maintenance, commissioning, shutdowns, testing and

valve change outs Split-Flow Manifolds
• No need for hammers, chisels, slings or chainblocks For simultaneously and even
• Integrated wedge concept: Friction-free, smooth and parallel spreading of flange joints,
180° apart with FSH-14.
wedge movement eliminates flange damage and risk of
spreading arm failure
• Unique interlocking wedge design - no first step bending and Page: 124
risk of slipping out of joint
• Requires very small access gap of only 6 mm Tool and Pump
• Stepped spreader arm design - each step can spread under Sets
full load The hydraulic flange spreader is
• Few moving parts mean durability and low maintenance available as set (pump, tool,
gauge, gauge adaptor, couplers
• Safety block SB-1 and ratchet spanner SW-22 included with and hose) for your ordering
FSM-8 mechanical wedge spreader convenience.
• Safety block SB-1 and Enerpac RC-102 single-acting cylinder Spreader Handpump Set Model
included with FSH-14 hydraulic wedge spreader Modelnr. Modelnr. Number
FSH-14 P-392 STF-14H
▼ Two FSH-14 spreaders used simultaneously
with Enerpac handpump, hoses and AM-21
split-flow manifold. closed opened closed opened
310
22
SW-22
100
FSB-1
290
290
20
328
28
275
38
48
58
15
15
78
66 6 6
34
66 6
34
SB-1 31
31 25
31 31
25
FSH-14 61 FSM-8 61
Maximum Model Tip Maximum Spreader Oil

Spreading Force Number Clearance Spread 1) Type Capacity
ton (kN) (mm) (mm) (cm3) (kg)
14 (125) FSH-14* 6 81 Hydraulic 78 7,1
8 (72) FSM-8 6 81 Mechanical – 6,5
1)Using stepped blocks FSB-1
* Available as pump-tool set, see note on this page.
188
General
Hydraulic and mechanical FlangePurpose Cylinders
Alignment Tools
▼ From left to right: ATM-3, ATM-1, ATM-5 (shown without pump and hose)
ATM
Series
Minimum Bolt Hole Size:
17 mm 11/16”
Flange Wall Thickness:
17 - 203 mm 11/16 - 8”
Maximum Lifting Force:
0,3 - 5 ton
Adjustable reach on ATM-3
The highly adjustable reach
of the wing, the reversable lift
hook and manual torque
wrench TW-22 allow precise
alignment.
• Rectifies twist and rotational misalignment without additional

stress in pipe lines
• For most commonly used ANSI, API, BS and DIN flanges ATM-5 including hydraulics
• No slings, hooks, or lifting gear. Extremely safe, high precision Including 700 bar hydraulics:
RC-53 single-acting cylinder,
• ATM-1 supplied with three bushings for different bolt hole sizes. P-142 two-speed hand pump
Can be used in reversed position and 1,8 meters long safety
• ATM-3 fits on the following flanges: hose (HC-7206C).
– Ring Type Joints: flange wall thickness min 30 - max 100mm
– Gasket Type Joints: flange wall thickness min 25 - max 115mm
480
• ATM-5 Fits when flange joint is:
- between 93 - 228 mm [3.75 - 9 inch] apart and
– bolt hole size 31,5 mm [1.25 inch] or greater ø 27,4
57
81
ø17,0
• Can be installed and used in any position and any location

30 ø 21,3 ø 24,4
• Stays stable in position under full load 90
ATM-1 101
660
480
▼ The Enerpac ATM-3 used to align a large 368
526
ANSI flange.
TW-22
380
22
307
.
.
270
.
230
.
102
76
130
340
32
.
310
45 . .
30
145
106
150
240
ATM-3 ATM-5
Maximum Model Bolt Hole Range Flange Wall Thickness

Lifting Force Number
ton (kN) (mm) (inch) (mm) (inch) (kg)
0,3 (3) ATM-1 17 - 27,2 11/16- 11/8 17 - 50 11/16 - 2 2,0
3,0 (27) ATM-3 25 - 54 1 - 21/8 30 - 115 1 /16 - 4 /2 9,7
3 1
5,0 (45) ATM-5 * ≥ 31,5 ≥ 11/4 80-203 31/8 - 8 16,2

* At 700 bar maximum operating pressure.
ATM-5 weight including hydraulic cylinder. Total set weight 28,2 kg.
www.enerpac.com 189
Square Drive Hydraulic Torque Wrenches Hydraulic Technology Worldwide
From left to right: S3000, S6000, S1500
Rigid Steel Design
The Professional
Square Drive Solution
S-Series, Square Drive

Wrenches
This product range has been
designed using state-of-the-art CAD
techniques to bring you the most
advanced square drive torque wrench
on the market.
To ensure that the tools you buy meet

our own exacting requirements, during
the design process every prototype was
put through finite element stress
analysis, photo-elastic modelling,
rigorous cyclic testing and strain
Simplicity gauging.
• 360° click-on, multi-position reaction arm
• Push button square drive release for quickly reversing the
square drive for tightening or loosening Special design service
• Fine tooth ratchet prevents tool “lock-on” Should you have an application
• Single 360° hydraulic swivel manifold, complete with screw where it is not possible to use
lock couplings, increases wrench and hose the standard range of tools, then we
manoeuverability. invite you to draw on our extensive
experience in providing tailor-made
solutions to problems involving bolted
Design joints.
• Compact, high strength uni-body construction for a small
operating radius
• Robust design with minimal parts enables easy on-site
Optional Direct Allen-key
maintenance without special tools
Drives
• Lightweight, ergonomic design for easy handling and an Expanded versatility with a
easy fit, even in applications where access is limited wide range of metric and
• Optimised strength-to-weight ratio imperial Allen-key drives for
• Fast operation due to the large nut rotation per wrench hexagon socket head cap screws.
cycle (35 degree rotation angle) and rapid return stroke. Page: 192
Reliability Torque Wrench Hoses

• All wrenches are nickel-plated for excellent corrosion Use Enerpac THQ-700
protection and improved durability in harsh environments. Series torque wrench hoses
with S-Series torque
wrenches to ensure the
Accuracy integrity of your hydraulic system.
• Constant torque output provides high accuracy across the
full stroke
• Uni-body construction ensures accuracy by reducing 6 m long, 2 hoses THQ-706T
internal deflections. 12 m long, 2 hoses THQ-712T
190
Double-acting Square Drive Hydraulic Torque Wrenches
Use only Heavy Duty
Impact Sockets for
S
power driven
Series
torquing equipment, according
S-series Wrench with Standard
to ISO2725 and ISO1174;
Reaction Arm and Standard DIN 3129 and DIN 3121 or
Square Drive ASME-B107.2/1995.
Maximum Torque at 700 bar/10.000 psi:

Optional Direct Allen Key Drive,
see page 192 34.079 Nm / 25.150 Ft.lbs
TORQUE WRENCH SELECTION (based on socket size range) Square Drive Range:
Socket Size Range (inch) 3/4 - 21/2 inch
7/8 15/8 23/8 31/8 37/8 43/4 61/8 10
35.000
Torque Range (Nm)
Torque Range (Ft.lbs)

25.830 Nose Radius:
17/8
S25000
30.000 22.140 25,0 - 63,5 mm
25.000 18.450
700 bar / 10.000 psi
20.000 14.760
Torque Wrench Pump
15.000 11.070 Selection Matrix
S11000
For optimum speed and
10.000 7380 performance see the torque
S6000
5000 3690
S3000
S1500
Page: 206
20 40 50 60 80 100 120 155 255
Socket Size Range (mm)
D
The rigid steel design of
S-Series torque wrenches
guarantee durability,
F reliability and safety.
A
These wrenches can be
B G
powered by the portable
C H
ZU4T-Series pumps.
Typical Socket Square Drive Maximum Torque 1) Torque Dimensions (mm)

Size Range at 700 bar Wrench
Size Model Nr. Model Nr.
(inch) (included with
wrench)
(mm) (inch) (Nm) (Ft.lbs) A B C D E F G H (kg)
15 - 50 5/8 - 17/8” ”
3/4 SD15-012 1898 1400 S1500 39 63 110 95 136 25,0 69 119 2,7
20 - 100 7/8 - 37/8” 1” SD30-100 4339 3200 S3000 48 77 134 126 172 33,0 90 159 5,0
41 - 155 1 - 61/4”
5/8 11/2” SD60-108 8144 6010 S6000 57 90 179 162 201 42,0 112 187 8,5
41 - 155 15/8 - 61/4” 11/2” SD110-108 14.914 11.000 S11000 71 111 196 185 226 49,5 132 227 15,0
60 - 255 23/8 - 10” 21/2” SD250-208 34.079 25.140 S25000 87 143 244 240 292 63,5 182 292 31,0
1) Determine maximum torque according to the bolt (nut) size and grade.
www.enerpac.com 191
SDA-Series, Allen-Key Drives – Metric Hydraulic Technology Worldwide
Optional Allen-Key Drives and

Reaction Arm For
The SRA-Series Reaction Arm for Allen-
Key drives must be used instead of standard
S
reaction arm for square drives. Series
SELECTION CHART
TORQUE OPTIONAL ALLEN-KEY DRIVES, SHORT REACTION Maximum Torque at 700 bar:
WRENCH METRIC ARM FOR
ALLEN DRIVES 34.079 Nm
Hexagon Size Allen Drive:
H1
14 - 85 mm
B1
C1
Hexagon Maximum Dimen- Dimensions

Size Torque 1) sion (mm)
Model Model B1 Model Select the Right Torque
Number (mm) (Nm) Number (mm) Number C1 H1
Choose your Enerpac
14 644 SDA15-14 66 Torque Wrench using the
17 1152 SDA15-17 68 untightening rule of thumb:
S1500
19 1606 SDA15-19 70 SRA15 67,5 65 Loosening torque equals about 250% of
(1898 Nm) tightening torque.
22 1897 SDA15-22 73
24 1897 SDA15-24 74 Page: 206
17 1152 SDA30-17 77
19 1606 SDA30-19 79
Wedge Spreaders
22 2486 SDA30-22 82
S3000 Friction-free, smooth and
24 3232 SDA30-24 84 SRA30 80,0 74 parallel wedge movement
(4339 Nm)
27 4336 SDA30-27 85 with unique interlock wedge
30 4336 SDA30-30 87 design. Eliminates flange
32 4336 SDA30-32 88 damage and risk of spreading arm fail-
ure.
17 1152 SDA60-17 86
19 1606 SDA60-19 88 Page: 188
22 2486 SDA60-22 91
S6000
24 3232 SDA60-24 93 SRA60 91,5 89 ATM-Series Alignment
(8144 Nm)
27 4600 SDA60-27 94 Tools
30 6308 SDA60-30 96 Rectifies twist and rotational
32 7656 SDA60-32 97 misalignment without
additional stress in pipelines.
30 6308 SDA110-30 112
32 7656 SDA110-32 114
S11000 Page: 189
36 10.894 SDA110-36 117 SRA110 127,5 106
(14.911 Nm)
41 14.905 SDA110-41 121
46 14.905 SDA110-46 127
36 10.894 SDA250-36 140
41 16.098 SDA250-41 144
46 22.730 SDA250-46 148
50 29.194 SDA250-50 151
S25000 55 34.079 SDA250-55 154
SRA250 158,5 135
(34.079 Nm) 60 34.079 SDA250-60 158
65 34.079 SDA250-65 161
70 34.079 SDA250-70 164
75 34.079 SDA250-75 168
85 34.079 SDA250-85 175
1) Determine maximum torque according to the bolt size and grade.
192
SDA-Series, Allen-Key Drives – Imperial
Optional Allen-Key Drives and
Reaction Arm For
The SRA-Series Reaction Arm for Allen-
Key drives must be used instead of standard
S
reaction arm for square drives. Series
SELECTION CHART
TORQUE OPTIONAL ALLEN-KEY DRIVES, IMPERIAL SHORT REACTION Maximum Torque at 700 bar/10.000 psi:
WRENCH ARM FOR
ALLEN DRIVES 34.079 Nm / 25.150 Ft.lbs
Hexagon Size Allen Drive:
H1
1/2 - 21/4 inch
B1
C1
Hexagon Maximum Dimen- Dimensions

Size Torque 1) sion (mm)
Model Model B1 Model Nut Splitters
Number (inch) (Nm) Number (mm) Number C1 H1
1/2”
Remove rusted or corroded
481 SDA15-008 66 nuts easily with Enerpac Nut
5/8” 935 SDA15-010 67 Splitters. Capacities up to
S1500 3/4” 1619 SDA15-012 71 SRA15 67,5 65 75 mm hexagon nut.
(1898 Nm) 7/8” 1897 SDA15-014 74
1” 1897 SDA15-100 77
5/8” 935 SDA30-010 77 Page: 186
3/4” 1619 SDA30-012 80
7/8” 2568 SDA30-014 83
S3000 Torque Wrench Pump
1” 3828 SDA30-100 86 SRA30 80,0 74 Selection Matrix
(4339 Nm)
11/8” 5454 SDA30-102 88 For optimum speed and
11/4” 7480 SDA30-104 89 performance see the torque
– – – – wrench and pump matrix.
5/8” 935 SDA60-010 85
3/4” 1619 SDA60-012 89 Page: 206
7/8” 2568 SDA60-014 92
S6000
1” 3828 SDA60-100 95 SRA60 91,5 89 Hexagon Bolt and Nut Sizes
(8144 Nm)
11/8” 5454 SDA60-102 97 See the table for hexagon sizes
11/4” 7480 SDA60-104 98 of bolts, nuts and related thread
– – – – diameters.
11/4” 7480 SDA110-104 115 Page: 216

13/8” 9953 SDA110-106 117
S11000
11/2” 12.920 SDA110-108 118 SRA110 127,5 106
(14.911 Nm)
15/8” 14.905 SDA110-110 122
13/4” 14.905 SDA110-112 125
11/2” 12.920 SDA250-108 141
15/8” 16.423 SDA250-110 145
13/4” 20.508 SDA250-112 148
17/8” 25.230 SDA250-114 149
S25000 2” 30.617 SDA250-200 151
SRA250 158,5 135
(34.079 Nm) 21/4” 34.079 SDA250-204 154
– – – –
– – – –
– – – –
– – – –
1) Determine maximum torque according to the bolt size and grade.
www.enerpac.com 193
SQD-Series, Square Drive Torque Wrenches Hydraulic Technology Worldwide
Shown: SQD-100-I
Aluminium High
Power Wrenches
for Sockets or
Allen-Keys
Swivel Hose Connection

All Enerpac torque wrenches
feature lock-ring couplers
with a 360˚ swivel connection
to allow easy access in all
positions.
Select the Right Torque

Choose your Enerpac
Torque Wrench using the
untightening rule of thumb: Loosening
• Very high torque-to-weight ratio torque equals about 250% of tightening
torque.
• High speed, double-acting operation
• High degree of rotation angle for increased productivity Page: 206
• Never-jam mechanism
Optional Allen-Key Drives
• High repeatability, with accuracy ± 3%
Expanded versatility with a
• Slim nose radius and 360˚ swivel hose connection allow wide range of metric and
easier positioning in confined areas imperial Allen-key drives for
hexagon socket head cap
• Few moving parts means durability and low maintenance screws.
• Push-button drive release; no tools needed to reverse square Page: 196
or Allen-key drives for tightening or loosening
• Lock-ring couplers are standard Carrying Handle CH-100
• Fully corrosion resistant material For easy transport to distant
• Storage case (included) protects from damage, water and jobs. Makes handling and
dirt positioning easier, reduces
operator fatique. Optional for
SQD-75-I to SQD-160-I, standard on the
SQD-270-I.
Easy and reliable service in the field using Enerpac

SQD-series torque wrenches powered by the
portable PTE-3404W electric torque wrench pump.
194
Double-Acting Square Drive Torque Wrenches
SQD
Series
All torque wrenches come

standard with swivel connec-
tion, lock-ring couplers,
square drive and reaction arm
for square drive. Maximum Torque:
27.000 Nm
TORQUE WRENCH SELECTION (based on socket size range) Square Drive Range:
Socket Size Range (inch)

3/4 - 21/2 inch
7/8 15/8 23/8 31/8 37/8 43/4 61/8 10
Torque Range (Nm)

27.500 20.295
17/8
25.000 SQD-270-I 18.450 800 bar
20.000 14.760
Use only Heavy Duty
Impact Sockets for power
15.000 SQD-160-I 11.070 driven torquing equipment,
according to ISO 2725 and
10.000 7380 ISO 1174; DIN 3129 and DIN 3121 or
SQD-100-I
ASME-B107.2/1995.
5000 SQD-75-I 3690
SQD-50-I
SQD-25-I
Torque Wrench Pumps
20 40 50 60 80 100 120 155 255 and Hoses
Socket Size Range (mm)
Enerpac system matched air
and electric torque wrench
pumps provide control to
operate hydraulic torque wrenches.
G
H Page: 206
B Hexagon Bolt and Nut Sizes

N of bolts, nuts and related thread
D
J diameters.
M E L C K
A Page: 216
Typical Socket Square Drive Maximum Torque Dimensions (mm)

Size Range 1) Torque 2) Wrench
Size J Model Nr. at 800 bar Model Nr. 3)
(inch) (square drive

included with
wrench)
(mm) (inch) (Nm) (Ft.lbs) A B C D E G H K L M N (kg)
15 - 50 11/16 - 17/8” 3/4” 25S-075 2350 1735 SQD-25-I 167 72 53 24 108 95 35 6 28 27 36 2,5
20 - 100 7/8 - 37/8” 1” 50S-100 4800 3550 SQD-50-I 204 92 68 31 135 115 35 15 33 34 52 4,3
30 - 110 11/8 - 43/8” 1
1 /2” 75S-150 7560 5570 SQD-75-I 226 107 76 36 153 122 35 12 43 39 64 6,7
40 - 120 15/8 - 43/4” 11/2” 100S-150 10.000 7360 SQD-100-I 253 115 84 39 164 130 35 13 39 43 68 8,0
60 - 155 23/8 - 61/8” 11/2” 160S-150 16.000 11.835 SQD-160-I 272 134 100 48 178 150 50 11 45 54 81 12,0
80 - 255 31/8 - 10” 21/2” 270S-250 27.000 19.875 SQD-270-I 342 164 119 59 218 200 50 18 76 63 99 24,5
1)Contact ENERPAC for socket specifications. 3) including reaction arm and square drive.
2)Determine maximum torque according to the bolt (nut) size and
grade.
www.enerpac.com 195
SQD-Series, Metric Allen-Key Drives Hydraulic Technology Worldwide
For
SELECTION CHART SQD
TORQUE OPTIONAL ALLEN-KEY DRIVES, REACTION ARM Series
WRENCH METRIC FOR ALLEN
KEY DRIVE
Maximum Torque at 800 bar:

27.000 Nm
Hexagon Maximum
Size Torque 1) Allen-Key Drive Range:
Model
Number (mm) (Nm)
Model
Number
Model
Number
14 - 70 mm
14 750 25A-14
17 1300 25A-17
SQD-25-I Optional Allen-key Drives
19 1800 25A-19 RAH-25 and Reaction Arm
(2350 Nm)
22 2350 25A-22 The RAH-Reaction Arm for
24 2350 25A-24 allen-key drives must be
17 1300 50A-17 used instead of reaction arm
for square drives.
19 1800 50A-19
22 2800 50A-22
SQD-50-I
24 3500 50A-24 RAH-50
(4800 Nm)
27 4800 50A-27 Torque Wrench Pumps
30 4800 50A-30 and Hoses
32 4800 50A-32 Enerpac system matched air
and electric torque wrench
17 1300 75A-17
pumps provide control to
19 1800 75A-19 operate hydraulic torque wrenches.
22 2800 75A-22
SQD-75-I Page: 206
24 3500 75A-24 RAH-75
(7560 Nm)
27 5000 75A-27
30 7000 75A-30 Flange Spreaders
32 7560 75A-32 Separates pipe flanges with
22 2800 100A-22 ease, enabling efficient
maintenance tasks.
24 3500 100A-24
SQD-100-I 27 5000 100A-27
RAH-100
(10.000 Nm) 30 7000 100A-30
Page: 187
32 8500 100A-32
36 10.000 100A-36
30 7000 160A-30 SQD-50-I with 50A-22 Allen-key drive with
32 8500 160A-32 RAH-50 Reaction Arm for Allen-key drives.
SQD-160-I
36 12.000 160A-36 RAH-160
(16.000 Nm)
41 16.000 160A-41
46 16.000 160A-46
36 12.000 270A-36
41 18.000 270A-41
46 25.000 270A-46
SQD-270-I 50 27.000 270A-50
RAH-270
(27.000 Nm) 55 27.000 270A-55
60 27.000 270A-60
65 27.000 270A-65
70 27.000 270A-70
1) Determine maximum torque according to the bolt
size and grade.
196
SQD-Series, Imperial Allen-Key Drives
For
SELECTION CHART SQD
TORQUE OPTIONAL ALLEN-KEY DRIVES, REACTION ARM Series
WRENCH IMPERIAL FOR ALLEN
KEY DRIVE
Maximum Torque at 800 bar/ 11.600 psi:

27.000 Nm / 19.900 Ft.Ibs
Hexagon Maximum
Size Torque 1) Allen-Key Drive Range:
Model
Number (inch) (Nm)
Model
Number
Model
Number
1/2 - 21/4 inch
1/2” 530 25A-050
5/8” 1000 25A-063
SQD-25-I Select the Right Torque
3/4” 1800 25A-075 RAH-25
(2350 Nm) 7/8”
Choose your Enerpac
2350 25A-088 Torque Wrench using the
1” 2350 25A-100 untightening rule of thumb:
5/8” 1000 50A-063 Loosening torque equals about 250% of
3/4” tightening torque.
1800 50A-075
7/8” 2800 50A-088 Page: 206
SQD-50-I
1” 4200 50A-100 RAH-50
(4800 Nm) 1
1 /8” 4800 50A-113
Nut Splitters
11/4” 4800 50A-125
Remove rusted or corroded
– – – nuts easily with Enerpac Nut
5/8” 1000 75A-063 Splitters. Capacities up to
3/4” 1800 75A-075 75 mm hexagon nut.
7/8” 2800 75A-088
SQD-75-I Page: 186
1” 4200 75A-100 RAH-75
(7560 Nm)
11/8” 5900 75A-113
11/4” 7560 75A-125 Hexagon Bolt and Nut Sizes
– – – See the table for hexagon sizes
7/8” 2800 100A-088 of bolts, nuts and related
thread diameters.
1” 4200 100A-100 Page: 216
SQD-100-I 11/8” 5900 100A-113
RAH-100
(10.000 Nm) 11/4” 8500 100A-125
13/8” 10.000 100A-138 SQD-100-I with RAH-100 Reaction Arm and
11/2” 10.000 100A-150 Allen-key drive used for loosening hexagon
socket head cap screws.
11/4” 8500 160A-125
13/8” 10.500 160A-138
SQD-160-I
11/2” 14.000 160A-150 RAH-160
(16.000 Nm)
15/8” 16.000 160A-163
13/4” 16.000 160A-175
11/2” 14.000 270A-150
15/8” 18.000 270A-163
13/4” 22.000 270A-175
SQD-270-I 17/8” 27.000 270A-188
RAH-270
(27.000 Nm) 2” 27.000 270A-200
21/4” 27.000 270A-225
– – –
– – –
1) Determine maximum torque according to the bolt
size and grade.
www.enerpac.com 197
W-Series, Low Profile Hexagon Wrenches Hydraulic Technology Worldwide
Shown: Drive units with interchangeable cassettes
Rigid Steel Design
The Professional
Low Profile Solution
W-Series, Low Profile Torque

Wrenches
This product range has been
designed using state-of-the-art CAD
techniques to bring you the most
advanced low profile torque wrench on
the market. Safety, quality, toughness
and reliability are built in.
During the design process every

prototype was put through finite element
stress analysis, photo-elastic modelling,
rigorous cyclic testing and strain
gauging.
Simplicity
• No tools are needed for changing the hexagon cassettes
• Innovative, pinless wrench construction incorporates quick Special Design Service
release cylinder and automatic crank engagement Should you have an application
• Single 360° hydraulic swivel manifold complete with screw lock where it is not possible to use
couplings increases wrench and hose manoeuvrability. the standard range of tools, then we
invite you to draw on our extensive
experience in providing tailor-made
Design solutions to problems involving bolted
• Cylinders and low profile cassettes have been engineered to give joints.
ultra slim, compact low clearance tooling with a small nose radius
• Robust design with minimal parts enables easy on-site
maintenance without special tools
• Nut sizes covered range from 11/4 - 45/8 inch AF (30 – 115 mm) Versatility
• Optimized strength-to-weight ratio • Quick Release
• Fast operation due to the large nut rotation per wrench cycle interchangeable low profile
hexagon cassettes
(30 degree rotation angle) and rapid return stroke
• One drive unit per size
range) can be used to drive any hexagon
Reliability within that range.
• All wrenches are nickel-plated for excellent corrosion protection
and improved durability in harsh environments
• All wrenches are fitted with bronze bushings to ensure the ratchet
Torque Wrench Hoses
will never seize in the sideplates, thus eliminating costly repairs
Use Enerpac THQ-700
Series hoses with W-Series
Accuracy torque wrenches to ensure
• Constant torque output provides high accuracy across the full the integrity of your hydraulic
stroke system.
• In-line reaction foot ensures accuracy by reducing internal
deflections.
6 m long, 2 hoses THQ-706T
12 m long, 2 hoses THQ-712T
198
Double-Acting Hydraulic Hexagon Torque Wrenches
Hexagon Cassettes
Drive Unit
and Reducer Inserts W
Maximum versatility Series
with the full range of
interchangeable
hexagon cassettes and hexagon
reducing inserts is available in
metric and inch sizes.
Interchangeable Page: 200 Maximum Torque at 700 bar / 10.000 psi:

Hexagon Cassette
20.337 Nm/15.000 Ft.lbs
Optional Hexagon Hexagon Range:
Reducer Insert,
see page 200. 30-115 mm/11/4 -45/8 inch
Nose Radius:
DRIVE UNIT AND INTERCHANGEABLE CASSETTE SELECTION
Hexagon Size Range (inch)
31,0 - 87,5 mm
17/16 23/16 23/4 31/8 37/8 45/8 Maximum Operating Pressure:
Torque Range (Nm)

22.000 16.225
20.000 14.750
700 bar / 10.000 psi
W15000
18.000 13.275
16.000 11.800 Torque Wrench Pump
14.000 10.325 Selection Matrix
12.000 8850 For optimum speed and
10.000 7375
W8000
8000 5900
6000 4425
4000 W4000 2950
Page: 206
2000 W2000 1475
0 0
These rigid steel wrenches with low profile
36 41 46 50 55 60 65 70 75 80 85 90 95 100 105 110 115 interchangeable hexagon cassettes guarantee
durability and maximum versatility in bolting
Hexagon Size Range (mm) applications.
B
A
E
F
G
D H C
SELECTION CHART
Hexagon Range * Maximum Torque Drive Unit Minimum Dimensions (mm)

at 700 bar Model Torque
(10.000 psi) Number Drive unit
without
hexagon
200 cassette
(mm) (inch) (Nm) (Ft.lbs) (Nm) (Ft.lbs) A B C D E F (kg)
7 3
36 - 55 1 /16 - 2 /8 2712 2000 W2000 271 200 109 141 148 32,0 24,0 20 1,4
5 1
55 - 80 1 /8 - 3 /8 5423 4000 W4000 542 400 136 167 178 41,0 32,8 20 2,0
3 7
70 - 95 2 /16 - 3 /8 10.846 8000 W8000 1084 800 172 205 208 52,5 41,9 25 3,0
9
80 - 115 2 /16 - 5 20.337 15.000 W15000 2033 1500 207 240 253 63,0 50,0 20 5,0
* With in-line reaction foot. See pages 200-201 for dimensions H and G.
www.enerpac.com 199
Metric Hexagon Cassettes and Reducer Inserts Hydraulic Technology Worldwide
Torque Wrench Pump Selection Matrix

For optimum speed and performance see the W
torque wrench and pump matrix. Series
Page: 206
Drive Unit
20.337 Nm
Interchangeable
Hexagon Cassette Hexagon Range:
dimension F
F
W2000 20 30 - 115 mm
W4000 20
H G W8000 25 Optional Hexagon
W15000 20 Reducing Insert 700 bar
SELECTION CHART
Drive Unit HEXAGON CASSETTES – METRIC
Model Nr.
Hexa- Nose Model G
gon Radius Number
Size H
Hexagon Hexagon Hexagon Hexagon Hexagon Hexagon
Reducer Reducer Insert Reducer Reducer Insert Reducer Reducer Insert
Size Model Number Size Model Number Size Model Number
(mm) (mm) (mm) (kg) (mm) (mm) (mm)
36 31,0 W2107 53,7 1,9 – – – – – –
38 33,5 W2108 58,2 2,0 – – – – – –
41 33,5 W2110 58,2 2,0 41/36 W2110R107 41/32 W2110R104 41/30 W2110R030M
W2000
46 36,5 W2113 60,5 2,0 46/41 W2113R110 46/36 W2113R107 46/32 W2113R104
(2712Nm)
50 39,0 W2200 63,1 2,0 50/46 W2200R113 50/41 W2200R110 50/36 W2200R107
55 41,8 W2203 68,6 2,1 55/50 W2203R200 55/46 W2203R113 55/41 W2203R110
60 44,5 W2206 64,8 2,2 60/55 W2206R203 60/50 W2206R200 60/46 W2206R113
– – – – – – – – – –
55 44,0 W4203 73,4 3,8 55/50 W4203R200 55/46 W4203R113 55/41 W4203R110
60 46,5 W4206 70,6 3,9 60/55 W4206R203 60/50 W4206R200 60/46 W4206R113
63 49,5 W4208 76,2 3,9 63/55 W4208R203 63/50 W4208R200 63/46 W4208R113
W4000
65 49,5 W4209 76,2 3,9 65/60 W4209R206 65/55 W4209R203 65/50 W4209R200
(5423Nm)
70 52,5 W4212 78,3 4,0 70/65 W4212R209 70/60 W4212R206 70/55 W4212R203
75 55,5 W4215 81,6 4,1 75/70 W4215R212 75/65 W4215R209 75/60 W4215R206 1)
80 58,5 W4302 83,5 4,2 80/75 W4302R215 80/70 W4302R212 80/65 W4302R209
– – – – – – – – – – –
65 56,0 W8209 84,8 7,8 65/60 W8209R206 65/55 W8209R203 65/50 W8209R200
70 56,0 W8212 84,8 7,8 70/65 W8212R209 70/60 W8212R206 70/55 W8212R203
75 58,0 W8215 85,0 7,8 75/70 W8215R212 75/65 W8215R209 75/60 W8215R206 2)
W8000
80 60,5 W8302 89,5 7,9 80/75 W8302R215 80/70 W8302R212 80/65 W8302R209
(10.846Nm)
85 66,0 W8085M 92,2 8,1 85/80 W8085R080M 85/75 W8085R075M 85/70 W8085R070M
90 74,0 W8090M 102,9 8,7 90/85 W8090R085M 90/80 W8090R080M 90/75 W8090R075M
95 74,0 W8312 102,9 8,8 95/90 W8312R090M 95/85 W8312R085M 95/80 W8312R302 3)
– – – – – – – – – –
80 64,5 W15302 92,9 13,7 80/75 W15302R215 80/70 W15302R212 80/65 W15302R209
85 69,5 W15085M 96,6 14,0 85/80 W15085R080M 85/75 W15085R075M 85/70 W15085R070M
90 75,0 W15090M 101,8 14,4 90/85 W15090R085M 90/80 W15090R080M 90/75 W15090R075M
W15000 4)
95 75,0 W15312 101,8 14,5 95/90 W15312R090M 95/85 W15312R085M 95/80 W15312R302
(20.337Nm)
105 80,5 W15402 103,1 14,7 105/100 W15402R100M 105/95 W15402R312 105/90 W15402R090M
110 87,5 W15110M 114,8 15,0 110/105 W15110R105M 110/100 W15110R100M 110/95 W15110R095M
115 87,5 W15115M 114,8 15,3 115/110 W15115R110M 115/105 W15115R105M 115/100 W15115R100M
– – – – – – – – – – –
1) Additional Reducer Insert is hexagon size 75/55 mm, Modelnr. W4215R203, fits in W4215 hexagon cassette.
200 4) Additional Reducer Insert is hexagon size 95/75 mm, Modelnr. W15312R215, fits in W15312 hexagon cassette.
Imperial Hexagon Cassettes and Reducer Inserts
Torque Wrench Pump Selection Matrix
For optimum speed and performance see the W
torque wrench and pump matrix. Series
Page: 206
Drive Unit
Maximum Torque at 700 bar/10.000 psi:
20.337 Nm/15.000 Ft.lbs
Interchangeable
Hexagon Cassette Hexagon Range:
dimension F
11/4 - 45/8 inch
F
W2000 20
W4000 20
H G W8000 25 Optional Hexagon
W15000 20 Reducing Insert 700 bar / 10.000 psi
SELECTION CHART
Drive Unit HEXAGON CASSETTES – INCHES
Model Nr.
Hexa- Nose Model G
gon Radius Number
Size H
Hexagon Hexagon Hexagon Hexagon Hexagon Hexagon
Reducer Reducer Reducer Reducer Reducer Reducer
Size Insert Size Insert Size Insert
(inch) (mm) (mm) (kg) (inch) Model Nr. (inch) Model Nr. (inch) Model Nr.
17/16 31,0 W2107 53,7 1,9 – – – – – –
11/2 33,5 W2108 58,2 2,0 – – – – – –
15/8 33,5 W2110 58,2 2,0 15/8 - 17/16 W2110R107 15/8 - 11/4 W2110R104 – –
W2000
113/16 36,5 W2113 60,5 2,0 113/16 - 15/8 W2113R110 113/16 - 17/16 W2113R107 113/16 - 11/4 W2113R104
(2712Nm)
2 39,0 W2200 63,1 2,0 2 - 113/16 W2200R113 2 - 15/8 W2200R110 2 - 17/16 W2200R107
23/16 41,8 W2203 68,6 2,1 23/16 - 2 W2203R200 23/16 - 113/16 W2203R113 23/16 - 15/8 W2203R110
23/8 44,5 W2206 64,8 2,2 23/8 - 23/16 W2206R203 23/8 - 2 W2206R200 23/8 - 113/16 W2206R113
– – – – – – – – – –
23/16 44,0 W4203 73,4 3,8 23/16 - 2 W4203R200 23/16 - 113/16 W4203R113 23/16 - 15/8 W4203R110
23/8 46,5 W4206 70,6 3,9 23/8 - 23/16 W4206R203 23/8 - 2 W4206R200 23/8 - 113/16 W4206R113
21/2 49,5 W4208 76,2 3,9 21/2 - 23/16 W4208R203 21/2 - 2 W4208R200 21/2 - 113/16 W4208R113
W4000
29/16 49,5 W4209 76,2 3,9 29/16 - 23/8 W4209R206 2 /16 - 23/16
9 W4209R203 29/16 - 2 W4209R200
(5423Nm)
23/4 52,5 W4212 78,3 4,0 23/4 - 29/16 W4212R209 23/4 - 23/8 W4212R206 23/4 - 23/16 W4212R203
1)
215/16 55,5 W4215 81,6 4,1 215/16 - 23/4 W4215R212 215/16 - 29/16 W4215R209 215/16 - 23/8 W4215R206
31/8 58,5 W4302 83,5 4,2 31/8 - 215/16 W4302R215 31/8 - 23/4 W4302R212 31/8 - 29/16 W4302R209
– – – – – – – – – – –
29/16 56,0 W8209 84,8 7,8 29/16 - 23/8 W8209R206 29/16 - 23/16 W8209R203 29/16 - 2 W8209R200
23/4 56,0 W8212 84,8 7,8 23/4 - 29/16 W8212R209 23/4 - 23/8 W8212R206 23/4 - 23/16 W8212R203
2)
215/16 58,0 W8215 85,0 7,8 215/16 - 23/4 W8215R212 215/16 - 29/16 W8215R209 215/16 - 23/8 W8215R206
W8000
31/8 60,5 W8302 89,5 7,9 31/8 - 215/16 W8302R215 31/8 - 23/4 W8302R212 31/8 - 29/16 W8302R209
(10.846Nm) 1
3 /2 66,0 W8308 92,2 8,1 31/2 - 31/8 W8308R302 31/2 - 215/16 W8308R215 31/2 - 23/4 W8308R212
3)
33/4 74,0 W8312 102,9 8,7 33/4 - 31/2 W8312R308 33/4 - 31/8 W8312R302 33/4 - 215/16 W8312R215
37/8 74,0 W8314 102,9 8,8 37/8 - 31/2 W8314R308 37/8 - 31/8 W8314R302 37/8 - 215/16 W8314R215
– – – – – – – – – – –
31/8 64,5 W15302 92,9 13,7 31/8 - 215/16 W15302R215 31/8 - 23/4 W15302R212 31/8 - 29/16 W15302R209
31/2 69,5 W15308 96,6 14,0 31/2 - 31/8 W15308R302 31/2 - 215/16 W15308R215 31/2 - 23/4 W15308R212
33/4 75,0 W15312 101,8 14,5 33/4 - 31/2 W15312R308 33/4 - 31/8 W15312R302 33/4 - 215/16 W15312R215
W15000
37/8 75,0 W15314 101,8 14,5 37/8 - 31/2 W15314R308 37/8 - 31/8 W15314R302 37/8 - 215/16 W15314R215
(20.337Nm) 1
4 /8 80,5 W15402 103,1 14,7 41/8 - 37/8 W15402R314 41/8 - 33/4 W15402R312 41/8 - 31/2 W15402R308
41/4 80,5 W15404 103,1 14,7 41/4 - 37/8 W15404R314 41/4 - 31/2 W15404R308 41/4 - 31/8 W15404R302
45/8 87,5 W15410I 114,8 15,3 45/8 - 41/4 W15410R404 45/8 - 37/8 W15410R314 45/8 - 31/2 W15410R308
– – – – – – – – – –
1)Additional Reducer Insert is hexagon size 215/16 - 23/16 inch, Modelnr. W4215R203, fits in W4215 hexagon cassette.
2)Additional Reducer Insert is hexagon size 215/16 - 23/16 inch Modelnr. W8215R203, fits in W8215 hexagon cassette.
3)Additional Reducer Insert is hexagon size 33/4 - 23/4 inch Modelnr. W8312R212, fits in W8312 hexagon cassette.
See the table of hexagon bolt and nut sizes and related thread diameters on page 216.
201
HXD-Series, Hexagon Cassette Wrenches Hydraulic Technology Worldwide
Shown from left to right: HXD-60 with CC-680, HXD-30 with CC-360
Aluminium Design,
Low Profile and
Slim Nose Radius
Select the Right Torque

Choose your Enerpac
Torque Wrench using the
untightening rule of thumb:
Loosening torque equals about 250% of
tightening torque.
Page: 206
Hexagon Bolt and Nut Sizes

of bolts, nuts and related
thread diameters.
• High torque-to-weight ratio, slim nose radius and flat design
Page: 216
• High speed, high degree of rotation angle, double-acting
• Snap in, interchangeable cassettes, no tools required
Nut Splitters
• 360˚ swivel hose connection allows easier positioning in
confined areas Remove rusted or corroded
nuts easily with Enerpac Nut
• Lock-ring couplers are standard Splitters. Capacities up to
• High repeatability, with accuracy ± 3% 75 mm hexagon nut.
• Strong unibody design, integrated reaction arm and few moving
parts make wrenches durable and reliable Page: 186
• Extensive range of metric and imperial hexagon cassettes and
reducers
• Fully corrosion resistant material
• Drive unit and cassette come in storage case to protect from
damage, water and dirt
The HXD-30 drive unit combined with cassette CC-360 is the best solution for this turbine An Enerpac hydraulic wrench brings safety and
application. The slim nose radius and swivel couplers allow easy access in all positions. economy to all kinds of maintenance jobs.
202
Double-Acting Hydraulic Torque Wrenches
Shown from left to right: CC-360, HXD-30 TORQUE WRENCH
SELECTION IN 2 STEPS: HXD
Series
1 DRIVE UNIT
2 1
Select the HXD-Drive
Unit using the quick
selection chart below.
2 CASSETTE
Select the appropriate
CC-Cassette from the Maximum Torque:
pages 204 and 205. 24.210 Nm
Hexagon Range:
30 - 130 mm
Nose Radius:
28,5 - 96,0 mm
DRIVE UNIT AND INTERCHANGEABLE CASSETTE SELECTION
Hexagon Size Range (inch)
800 bar
Torque Range (Nm)

11/4 15/8 23/16 23/8 31/8 37/8 45/8 5
24.000 17.700
22.000 16.225
HXD-240
20.000 14.750 Reducer Inserts
18.000 13.275 Expanded versatility with the
16.000 11.800 full range of metric and
14.000 10.325 imperial Reducer Inserts and
12.000
HXD-120
8850 Holding Rings.
10.000 7375
8000 5900
Page: 204
6000 4425
HXD-60
4000 2950
Torque Wrench Pump
2000 1475
HXD-30 Selection Matrix
0 0
32 36 41 46 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 For optimum speed and
Hexagon Size Range (mm) performance see the torque
Page: 206
E
D
F A C
Hex Cassette & Reducer Range Maximum Drive Unit * Drive Unit and Cassette Dimensions (mm)
Torque Model Number
at at
Page: 204 800 bar 11.600 psi
(mm) (inch) (Nm) (Ft.lbs) A B C D E F H (kg)
1 3
32 - 60
1 /4 - 2 /8 3290 2425 HXD-30 135 91 - 103 28 28,5 - 47,5 40 60 38 1,6
5 1
41 - 80
1 /8 - 3 /8 6190 4565 HXD-60 156 115 - 130 35 34,5 - 60,5 50 75 38 2,5
3 7
55 - 100
2 /16 - 3 /8 12.500 9220 HXD-120 200 141 - 156 47 46,5 - 73,5 65 96 38 4,8
9
65 - 130
2 /16 - 5 24.210 17.860 HXD-240 259 182 - 202 56 62,0 - 96,0 82 125 50 8,2
* With integrated reaction arm.
www.enerpac.com 203
HXD-Series, Metric Cassettes and Inserts Hydraulic Technology Worldwide

24.210 Nm CC
Hexagon Range: IN
30 - 130 mm HR
The optional Reducer Insert Maximum Operating Pressure: Series
must be secured in the
Cassette with a Holding Ring. 800 bar
SELECTION CHART
DRIVE UNIT INTERCHANGEABLE CASSETTES, OPTIONAL ADD-ON REDUCER INSERTS, HOLDING
METRIC METRIC RINGS
Max. Hex. Nose Hexagon Hexagon Hexagon

Torque1) Size 2) Radius Size Size Size
Model D Model Model Model Model Model
Number (Nm) (mm) (mm) Number (kg) (mm) Number (mm) Number (mm) Number Number
1700 32 28,5 CC-332 0,6 – – – – – – –
2100 36 31,5 CC-336 0,7 – – – – – – –
HXD-30 2500 41 34,5 CC-341 0,7 41/36 IN3-4136 41/32 IN3-4132 41/30 IN3-4130 HR-41
(3290 Nm) 2890 46 38,5 CC-346 0,8 46/41 IN3-4641 46/36 IN3-4636 46/32 IN3-4632 HR-46
50 42,0 CC-350 0,9 50/46 IN3-5046 50/41 IN3-5041 50/36 IN3-5036 HR-50
3290 55 45,0 CC-355 1,0 55/50 IN3-5550 55/46 IN3-5546 55/41 IN3-5541 HR-55
60 47,5 CC-360 1,1 60/55 IN3-6055 60/50 IN3-6050 60/46 IN3-6046 HR-60
3840 41 34,5 CC-641 1,2 41/36 IN6-4136 – – – – HR-41
4805 46 39,5 CC-646 1,3 – – – – – – –
50 43,5 CC-650 1,4 50/46 IN6-5046 50/41 IN6-5041 50/36 IN6-5036 HR-50
HXD-60 5410 55 46,5 CC-655 1,5 55/50 IN6-5550 55/46 IN6-5546 55/41 IN6-5541 HR-55
(6190 Nm) 60 48,5 CC-660 1,6 60/55 IN6-6055 60/50 IN6-6050 60/46 IN6-6046 HR-60
65 52,5 CC-665 1,8 65/60 IN6-6560 65/55 IN6-6555 65/50 IN6-6550 HR-65
70 55,5 CC-670 1,9 70/65 IN6-7065 70/60 IN6-7060 70/55 IN6-7055 HR-70
6190
75 57,5 CC-675 2,0 75/70 IN6-7570 75/65 IN6-7565 75/60 IN6-7560 HR-75
80 60,5 CC-680 2,1 80/75 IN6-8075 80/70 IN6-8070 80/65 IN6-8065 HR-80
55 46,5 CC-1255 2,6 55/50 IN12-5550 55/46 IN12-5546 55/41 IN12-5541 HR-55
8000
60 48,5 CC-1260 2,7 60/55 IN12-6055 60/50 IN12-6050 60/46 IN12-6046 HR-60
65 52,5 CC-1265 2,7 65/60 IN12-6560 65/55 IN12-6555 65/50 IN12-6550 HR-65
70 55,5 CC-1270 2,8 70/65 IN12-7065 70/60 IN12-7060 70/55 IN12-7055 HR-70
9800
HXD-120 75 57,5 CC-1275 2,9 75/70 IN12-7570 75/65 IN12-7565 75/60 IN12-7560 HR-75
(12500 Nm) – – – – – – – – – – –
10.860 80 60,5 CC-1280 3,0 80/75 IN12-8075 80/70 IN12-8070 80/65 IN12-8065 HR-80
85 64,5 CC-1285 3,5 85/80 IN12-8580 85/75 IN12-8575 85/70 IN12-8570 HR-85
90 67,5 CC-1290 3,6 90/85 IN12-9085 90/80 IN12-9080 90/75 IN12-9075 HR-90
12.500
95 70,5 CC-1295 3,7 95/90 IN12-9590 95/85 IN12-9585 95/80 IN12-9580 HR-95
100 73,5 CC-12100 3,8 100/95 IN12-10095 100/90 IN12-10090 100/85 IN12-10085 HR-100
13.890 80 62,0 CC-2480 5,1 80/75 IN24-8075 80/70 IN24-8070 80/65 IN24-8065 HR-80
16.030 85 66,0 CC-2485 5,2 85/80 IN24-8580 85/75 IN24-8575 85/70 IN24-8570 HR-85
16.560 90 69,0 CC-2490 5,2 90/85 IN24-9085 90/80 IN24-9080 90/75 IN24-9075 HR-90
17.100 95 72,0 CC-2495 5,4 95/90 IN24-9590 95/85 IN24-9585 95/80 IN24-9580 HR-95
HXD-240 18.170 100 76,0 CC-24100 5,6 100/95 IN24-10095 100/90 IN24-10090 100/85 IN24-10085 HR-100
(24.210 Nm) 20.840 105 80,0 CC-24105 5,7 105/100 IN24-105100 105/95 IN24-10595 105/90 IN24-10590 HR-105
110 84,0 CC-24110 5,8 110/105 IN24-110105 110/100 IN24-110100 110/95 IN24-11095 HR-110
115 87,0 CC-24115 7,1 115/110 IN24-115110 115/105 IN24-115105 115/100 IN24-115100 HR-115
24.210 120 90,0 CC-24120 7,3 120/115 IN24-120115 120/110 IN24-120110 120/105 IN24-120105 HR-120
125 93,0 CC-24125 7,3 125/120 IN24-125120 125/115 IN24-125115 125/110 IN24-125110 HR-125
130 96,0 CC-24130 7,4 130/125 IN24-130125 130/120 IN24-130120 130/115 IN24-130115 HR-130
1) Determine maximum torque according to the bolt (nut) size and grade.
2) See the table of hexagon bolt and nut sizes and related thread diameters on page 216.
204
HXD-Series, Imperial Cassettes and Reducer Inserts
24.210 Nm (17860 Ft.lbs) CC
Hexagon Range: IN
11/4 - 5 inch HR
The optional Reducer Insert Maximum Operating Pressure: Series
must be secured in the
Cassette with a Holding Ring. 800 bar
SELECTION CHART
DRIVE UNIT INTERCHANGEABLE CASSETTES, OPTIONAL ADD-ON REDUCER INSERTS, HOLDING
IMPERIAL IMPERIAL RINGS
Max. Hex. Nose Hexagon Hexagon

Torque1) Size 2) Radius Size Size
Model D Model Model Model Model
Number (Nm) (inch) (mm) Number (kg) (inch) Number (inch) Number Number
1700 11/4” 28,5 CC-3125 0,6 – – – – –
2100 17/16” 31,5 CC-3144 0,7 17/16” - 11/4” IN3144-125 – – HR-36
HXD-30 2500 15/8” 34,5 CC-3163 0,7 15/8” - 17/16” IN3163-144 15/8” - 11/4” IN3163-125 HR-41
(3290 Nm) 2890 113/16” 38,5 CC-3181 0,8 113/16” - 15/8” IN3181-163 113/16” - 17/16” IN3181-144 HR-46
2” 42,0 CC-3200 0,9 2” - 113/16” IN3200-181 2” - 15/8” IN3200-163 HR-50
3290 23/16” 45,0 CC-3219 1,0 23/16” - 2” IN3219-200 23/16” - 113/16” IN3219-181 HR-55
23/8” 47,5 CC-3238 1,1 2 /8” - 23/16”
3 IN3238-219 23/8” - 2” IN3238-200 HR-60
3840 15/8” 34,5 CC-6163 1,2 – – – – –
4805 113/16” 39,5 CC-6181 1,3 113/16” - 15/8” IN6181-163 – – HR-46
2” 43,5 CC-6200 1,4 2” - 113/16” IN6200-181 2” - 15/8” IN6200-163 HR-50
HXD-60 5410 23/16” 46,5 CC-6219 1,5 23/16” - 2” IN6219-200 23/16” - 113/16” IN6219-181 HR-55
(6190 Nm) 23/8” 48,5 CC-6238 1,6 23/8” - 23/16” IN6238-219 23/8” - 2” IN6238-200 HR-60
29/16” 52,5 CC-6256 1,8 29/16” - 23/8” IN6256-238 29/16” - 23/16” IN6256-219 HR-65
23/4” 55,5 CC-6275 1,9 23/4” - 29/16” IN6275-256 23/4” - 23/8” IN6275-238 HR-70
6190
215/16” 57,5 CC-6293 2,0 215/16” - 23/4” IN6293-275 215/16” - 29/16” IN6293-256 HR-75
31/8” 60,5 CC-6313 2,1 31/8” - 215/16” IN6313-293 31/8” - 23/4” IN6313-275 HR-80
23/16” 46,5 CC-12219 2,6 23/16” - 2” IN12219-200 23/16” - 113/16” IN12219-181 HR-55
8000
23/8” 48,5 CC-12238 2,7 2 /8” - 23/16”
3 IN12238-219 23/8” - 2” IN12238-200 HR-60
29/16” 52,5 CC-12256 2,7 29/16” - 23/8” IN12256-238 2 /16” - 23/16”
9 IN12256-219 HR-65
23/4” 55,5 CC-12275 2,8 23/4” - 29/16” IN12275-256 23/4” - 23/8” IN12275-238 HR-70
9800
HXD-120 215/16” 57,5 CC-12293 2,9 215/16” - 23/4” IN12293-275 215/16” - 29/16” IN12293-256 HR-75
(12500 Nm) 3” 57,5 CC-12300 2,9 3” - 23/4” IN12300-275 3” - 29/16” IN12300-256 HR-75
10.860 31/8” 60,5 CC-12313 3,0 31/8” - 215/16” IN12313-293 31/8” - 23/4” IN12313-275 HR-80
33/8” 64,5 CC-12338 3,5 33/8” - 3” IN12338-300 33/8” - 215/16” IN12338-293 HR-85
31/2” 67,5 CC-12350 3,6 3 /2” - 31/8”
1 IN12350-313 31/2” - 3” IN12350-300 HR-90
12.500
33/4” 70,5 CC-12375 3,7 33/4” - 31/2” IN12375-350 3 /4” - 33/8”
3 IN12375-338 HR-95
37/8” 73,5 CC-12388 3,8 37/8” - 31/2” IN12388-350 37/8” - 33/8” IN12388-338 HR-100
14.000 31/8” 62,0 CC-24313 3) 5,1 31/8” - 215/16” IN24313-293 31/8” - 23/4” IN24313-275 3) HR-80
15.840 33/8” 66,0 CC-24338 5,2 33/8” - 31/8” IN24338-313 33/8” - 3” IN24338-300 HR-85
16.570 31/2” 69,0 CC-24350 5,2 31/2” - 31/8” IN24350-313 31/2” - 3” IN24350-300 HR-90
17.320 33/4” 72,0 CC-24375 5,4 33/4” - 31/2” IN24375-350 33/4” - 33/8” IN24375-338 HR-95
HXD-240 18.050 37/8” 76,0 CC-24388 4) 5,6 37/8” - 31/2” IN24388-350 37/8” - 33/8” IN24388-338 4) HR-100
(24.210 Nm) 21.000 41/8” 80,0 CC-24413 5,7 41/8” - 37/8” IN24413-388 41/8” - 33/4” IN24413-375 HR-105
41/4” 84,0 CC-24425 6,8 41/4” - 37/8” IN24425-388 41/4” - 33/4” IN24425-375 HR-110
24.210 45/8” 90,0 CC-24463 7,3 45/8” - 41/4” IN24463-425 45/8” - 41/8” IN24463-413 HR-120
5” 96,0 CC-24500 7,4 5” - 45/8” IN24500-463 5” - 41/4” IN24500-425 HR-130
– – – – – – – –
–
– – – – – – – –
1) Determine maximum torque according to the bolt (nut) size and grade. www.enerpac.com
2) See the table of hexagon bolt and nut sizes and related thread diameters on page 216.
3) Additional imperial Reducer Insert is 31/8” - 29/16” IN24313-256 fits CC-24313 Cassette, use HR-80 Holding Ring.
4) Additional imperial Reducer Insert is 33/4” - 29/16” IN24375-313 fits CC-24388 Cassette, use HR-100 Holding Ring.
205
Selection Matrix Hydraulic Technology Worldwide
Optimum Torque Wrench & Pump Combinations

For optimum speed and performance ELECTRIC PUMPS
Enerpac recommends the following system
set-up with wrench-pump-hose PMU-Series PTE-Series
combinations.
NOTE: For other combinations, consult

your Enerpac bolting expert or your
authorized Enerpac distributor.
Enerpac Torque Wrenches Any brand of wrench

matching the torque
indicated below Page: 208 Page: 209
Flow at rated Flow at rated Flow at rated Flow at rated Flow at rated
700 bar pressure: pressure: pressure: pressure: pressure:
Torque Wrenches Maximum Torque 0,34 l/min 0,34 l/min 0,9 l/min 0,7 /min 0,9 l/min
Model Nr. Nm Ft.lbs 115V, 1 ph 230V, 1 ph 230V, 1 ph 230V, 3 ph 400V, 3 ph
S1500 1898 1400
PMU-10427-Q PMU-10422-Q – – –
S3000 4339 3200
S6000 8144 6010
S11000 14.914 11.000 – – PTE-3404E-Q PTE-3404T-Q PTE-3404W-Q
190 S25000 34.079 25.150
W2000 2712 2000 – – –
PMU-10427-Q PMU-10422-Q
W4000 5423 4000
W8000 10.846 8000 PTE-3404E-Q PTE-3404T-Q PTE-3404W-Q
– –
W15000 20.337 15.000
198
800 bar
Torque Wrenches
Model Nr.
SQD-25-I 2350 1735
PMU-10427 PMU-10422 – – –
SQD-50-I 4800 3550
SQD-75-I 7560 5570
SQD-100-I 10.000 7360 PTE-3404E PTE-3404T PTE-3404W
– –
SQD-160-I 16.000 11.835
194 SQD-270-I 27.000 19.875 – – –
HXD-30 3290 2425 – – –
PMU-10427 PMU-10422
HXD-60 6190 4565
HXD-120 12.500 9220 PTE-3404E PTE-3404T PTE-3404W
– –
HXD-240 24.210 17.860
202
Select the right Conditions of bolted joints

torque • For fully threaded UNC nuts and
Choose your Enerpac bolts do not exceed 11/2 times
torque wrench using nominal torque for a friction
the untightening rule coefficient of 0,1.
of thumb: • Humidity corrosion (rust) requires
• Be aware that when loosening a up to 2 times the torque required
nut or bolt more torque is usually for tightening.
required than when tightening. • Sea water and chemical
• Do not apply more than 75% of corrosion requires up to 21/2
the maximum torque when times the torque required for
loosening nuts or bolts. tightening.
• Heat corrosion requires up to 3
times the torque required for
tightening.
206
Torque Wrench, Pump & Hose Selection
ELECTRIC PUMPS AIR DRIVEN PUMPS TWIN

HOSES
ZU4T-Series PTA-Series PMA-Series THQ-Series
THC-Series
Page: 210 Page: 214 Page: 214 Page: 215

Flow at rated Flow at rated Flow at reated Flow at reated Flow at reated 700 bar
pressure: pressure: pressure: pressure: pressure: Torque
0,9 - 1,0 l/min 0,9 - 1,0 l/min 0,33 l/min 0,50 l/min 1,8 l/min Wrench
115V, 1 ph 230V, 1 ph Model Nr.
– S1500
– – PTA-1404-Q –
S3000
THQ-706T (6m)
PTA-3408-Q S6000
THQ-712T (12m)
ZU4208TB-Q ZU4208TE-Q – PMA-62480-Q S11000
– S25000
– – – W2000
PTA-1404-Q –
THQ-706T (6m) W4000
ZU4208TB-Q ZU4208TE-Q PTA-3408-Q THQ-712T (12m) W8000
– PMA-62480-Q
W15000
800 bar
Torque
Wrench
SQD-25-I
– – PTA-1404 –
– SQD-50-I
THC-7062 (6m) SQD-75-I
PTA-3408 THC-7122 (12m) SQD-100-I
ZU4208TB-E ZU4208TE-E –
PMA-62480 SQD-160-I
– SQD-270-I
– – – HXD-30
PTA-1404 –
THC-7062 (6m) HXD-60
ZU4208TB-E ZU4208TB-E PTA-3408 THC-7122 (12m) HXD-120
– PMA-62480
HXD-240
Torque Wrench Couplers

Refer to the System
Components section for
ordering couplers for torque
wrenches.
Page: 120
IMPORTANT!
Always make sure that the
torque scale on the pump
matches the torque wrench
size for accurate torque
settings.
www.enerpac.com 207
Portable Electric Torque Wrench Pumps Hydraulic Technology Worldwide
PMU-10422
PME,
PMU
Series
Reservoir Capacity:
3,0 litres
0,34 l/min
Motor Size:
0,37 kW
700 and 800 bar
• Powerful two-speed pump is lightweight and easy to carry

• Standard heat exchanger package on PMU-Series keeps the
oil cool under extreme use
• Glycerine filled gauge with scale reading in bar and psi
• Transparent overlays in Nm and Ft.lbs for Enerpac torque
wrenches provide a quick torque reference The lightweight PMU-10422 makes work on
remote locations easy.
• Universal motor for a high power-to-weight ratio;
• Adjustable pressure relief valve for accurate torque
adjustments and precise repeatability.
Oil Flow Maximum Model Model Usable Motor Motor Outside

Rate Pressure Number Number Oil Electrical Size Dimensions
Rating with Heat Capacity Specifications
(l/min) (bar) Exchanger 1)
LxWxH
1st 2nd 1st 2nd
stage stage stage stage (litres) (Amps-Volts-Ph-Hz) (kW) (mm) (kg)
3,3 0,34 50 700 PME-10422-Q PMU-10422-Q 2,8 9-230-1-50/60 0,37 250x250x360 17
3,3 0,34 50 700 PME-10427-Q PMU-10427-Q 2,8 9-115-1-50/60 0,37 432x280x381 17
3,3 0,34 50 800 PME-10422 PMU-10422 2,8 9-230-1-50/60 0,37 250x250x360 17
3,3 0,34 50 800 PME-10427 PMU-10427 2,8 9-115-1-50/60 0,37 432x280x381 17
1) PMU pump with heat exchanger weights 24 kg.
208
Portable Electric Torque Wrench Pumps
PTE-3404W
PTE
Series
Reservoir Capacity:
3,8 litres
0,7 - 0,9 l/min
Motor Size:
1,5 - 1,8 kW
700 and 800 bar
Torque Wrench Pump

• Two stage pump with automatic integrated bypass for faster Selection Matrix
torque cycles For optimum speed and
• Submerged motor for low noise and reduced heat build up performance see the torque
wrench, pump and hose
• Glycerine-filled pressure gauge with scale reading in bar/psi
matrix.
• Transparent overlays in Nm and Ft.lbs, included for Enerpac
torque wrenches produce accurate torque settings and Page: 206
precise repeatability
• Customer adjustable pressure relief valve Transparent Overlays
Transparent torque overlays
• Integrated motor disconnect switch and compact ergonomic in Nm and Ft.lbs for Enerpac
design. torque wrenches are
included with most Enerpac
torque wrench pumps.
The portable PTE-3404W

Oil Flow Maximum Model Usable Motor Motor Outside pump used to power a SQD-
Rate Pressure Number Oil Electrical Size Dimensions Series aluminium torque
Rating Capa- Specifications wrench.
(l/min) (bar) city
LxWxH
1st 2nd 1st 2nd
stage stage stage stage (litres) (Amps-Volts-Ph-Hz) (kW) (mm) (kg)
7,0 0,9 145 700 PTE-3404W-Q 1,1 5-400-3-50 1,5 622x202x443 29
5,4 0,9 145 700 PTE-3404E-Q 1,7 14-230-1-50 1,8 622x202x443 31
5,0 * 0,7 * 145 700 PTE-3404T-Q 1,7 7-230-3-50/60 * 1,8 622x202x443 31
7,0 0,9 145 800 PTE-3404W 1,1 5-400-3-50 1,5 622x202x443 29
5,4 0,9 145 800 PTE-3404E 1,7 14-230-1-50 1,8 622x202x443 31
5,0 * 0,7 * 145 800 PTE-3404T 1,7 7-230-3-50/60 * 1,8 622x202x443 31
Operating temperature: 5 - 65 Celsius.
* Flow rate shown at 50Hz. At 60 Hz the flow will be 6/5 higher.
www.enerpac.com 209
ZU4T-Series, Electric Torque Wrench Pumps Hydraulic Technology Worldwide
ZU4204TE-EHK (shown with optional heat exchanger and skidbar)
Tough, Dependable and

Innovative
Back-lit LCD and

Pressure Transducer
• Digital read-out and

“Autocycle” setting
• Pump usage information, hour and
cycle counts
• Low-voltage warning and recording
• Self-test and diagnostic capabilities
• Information can be displayed in
English, French, German, Italian,
Spanish and Portuguese
• Can be used with any brand of 700 or 800 bar single- and • Pressure transducer is more accurate
and durable than analog gauges
double-acting hydraulic torque wrenches
• Easy-viewing variable rate display
• LCD provides self test, diagnostic and read-out • Display pressure in bar, MPa or psi.
capabilities
• Auto cycle feature provides continuous cycle operation as
long as the advance button is pressed (pump can be used
with or without auto cycle feature)
• Available with 4-wrench manifold for simultaneous
operation of multiple torque wrenches
• Powerful 1,25 kW universal electric motor provides high
power-to-weight ratio
• High-strength, moulded composite shroud protects motor
and electronics, while providing an ergonomic, non- Any brand of hydraulic torque wrench can be
powered by the portable ZU4T-Series torque
conductive handle for easy transport wrench pump.
210 www.enerpac.com
Hydraulic Torque Wrench Pumps
ZU4T-Series Pump
Applications
make it ideal for applications which
require easy transport of the pump. ZU4T
It utilizes a universal motor which Series
will work well on long extension
The ZU4T-Series pump is best cords or generator driven electrical
suited to power medium to large power supplies.
size torque wrenches or hydraulic
tools, or wherever high speed, For further application assistance
intermittent duty cycle is needed. contact your local Enerpac office.
Reservoir Capacity:
Patent-pending Z-Class
technology provides high by-pass 4 and 8 litres
pressures for increased
productivity. Its high power to
weight ratio and compact design 0,9 - 1,0 l/min
Motor Size:
1,25 kW
Torque Wrench Pump Maximum Operating Pressure:
Selection Matrix
For optimum speed and
700 and 800 bar
selection matrix.
Page: 206
SELECTION CHART
BASIC PUMP TYPES Pump Type Maximum Motor Usable Model

For technical information see options and Operating Voltage Oil Number 1)
specifications: Pressure (1,25 kW) Capacity
2)
Page: 212 (bar) (litres) (kg)

800 bar Pumps for Enerpac SQD and HXD- 800 115 V / 1ph 4,0 ZU4204TB-E 32
Series torque wrenches 800 115 V / 1ph 8,0 ZU4208TB-E 36
• Ideal for bolting applications that require remote 800 230 V / 1ph 4,0 ZU4204TE-E 32
pump and valve operation. 800 230 V / 1ph 8,0 ZU4208TE-E 36
• Motor on/off and valve control in pendant.
Pressing up arrow advances wrench, releasing
up arrow retracts wrench (auto cycle off).
• Low-voltage control pendant with 6m cord for
remote motor and valve operation.
700 bar Pumps for all Enerpac S and W-Series 700 115 V / 1ph 4,0 ZU4204TB-Q 32
and other brands of torque wrenches 700 115 V / 1ph 8,0 ZU4208TB-Q 36
• Ideal for bolting applications that require remote 700 230 V / 1ph 4,0 ZU4204TE-Q 32
pump and valve operation. 700 230 V / 1ph 8,0 ZU4208TE-Q 36
• Motor on/off and valve control in pendant.
Pressing up arrow advances wrench, releasing
up arrow retracts wrench (auto cycle off).
• Low-voltage control pendant with 6m cord for
remote motor and valve operation.
1) All models meet CE safety requirements and all CSA requirements.

2) Subtract 1 kg per litre oil for competitive weight comparison.
211
ZU4T-Series, Torque Wrench Pump Options Hydraulic Technology Worldwide
Skidbar 4-Wrench Manifold Heat Exchanger 2)
• Provides greater pump • For simultaneous operation of • Removes heat from the
stability on soft or uneven multiple torque wrenches bypass oil to provide cooler
surfaces, and easy two-hand • Can be factory installed or operation
lift. ordered separately. • Stabilizes oil viscosity,
increasing oil life and reduces
wear of pump and other
hydraulic components.
2) Add suffix H for factory installation.
Heat Exchanger adds 4,1 kg to
pump weight.
Accessory Can be used on ZU4T-Series Accessory Can be used on ZU4T-Series
Kit Nr. * torque wrench pumps Kit Nr. * torque wrench pumps
SBZ-4 4 and 8 litres reservoir ZTM-UE for 800 bar torque wrenches
* Add suffix K for factory installation. ZTM-U4Q for 700 bar torque wrenches
Skidbar weight 2,2 kg. * Add suffix M for factory installation.
Thermal Max. Max. Vol-
Transfer * pressure oil flow tage
Btu/h kJoule (bar) (l/min) (VDC)

900 950 20,7 26,5 12
* At 1,9 l/min at 21 °C ambient
temperature.
Do not exceed maximum oil flow

and pressure ratings. Heat
exchanger is not suitable for
water-glycol or high water based
fluids.
Any hydraulic torque wrench can be

powered by the Enerpac ZU4T-Series
torque wrench pump.
212
ZU4T-Series, Ordering Matrix & Pump Specifications
This is how a ZU4T-Series pump model number is built up:
ZU4T
Z U 4 2 08 T E - Q H M Series
1 2 3 4 5 6 7 8
Product Motor Flow Valve Reservoir Valve Voltage Factory installed features
Type Type Group Type Size Operation and options
1 Product Type 6 Valve Operation

Z = Pump Class T = Solenoid valve with pendant Reservoir Capacity:
2 Prime Mover
and LCD Electric. 4 and 8 litres
U = Universal electric motor 7 Voltage Flow at Rated Pressure:
3 Flow Group
B = 115V, 1 phase, 50/60 Hz
E 2) = 208-240V, 1 phase, 50/60 Hz
0,9 - 1,0 l/min
4 = 1,0 l/min @ 700 bar (with European plug EMC) Motor Size:
0,9 l/min @ 800 bar
2) E-voltage meet all CE requirements.
1,25 kW
4 Valve Type 8 Factory installed features & options Maximum Operating Pressure:
2 = Torque wrench valve E 800 bar coupler for use with HXD-, 700 and 800 bar
SQD-Series or other wrenches
5 Reservoir Size Q 700 bar coupler for use with S-
04 = 4 litres useable oil and W-Series or other wrenches
08 = 8 litres useable oil H Heat exchanger
K Skidbar
M 4-wrench manifold.
PERFORMANCE CHART
ZU4T-Series Hydraulic Torque Wrench Pumps How to order your ZU4T-Series
Motor Output Flow Rate Relief Pump Motor 1) Cur- torque wrench pump
Size Valve Suffix Electrical rent
(l/min) Adjustment Specification Draw
7 50 350 700 800 Range
(kW) bar bar bar bar (bar) (Volts-ph-Hz) (A)
Ordering Example 1
bar
Model Nr. ZU4204TE-EHK
115-1-50/60 21 800 bar pump for use with Enerpac HXD
1,25 11,5 8,8 1,2 1,0 – 70-700 Q
230-1-50/60 11 and SQD-Series or other 800 bar torque
115-1-50/60 24 wrenches, 230V motor, 4 litres reservoir,
1,25 11,5 8,8 1,2 1,0 0,9 70-800 E
230-1-50/60 11 optional heat exchanger and skidbar.
1) Isolation- and protectionclassification IPX4 / NEMA 3R.
Sound Level 85-90 dBA. Ordering Example 2
Model Nr. ZU4208TB-QMHK
700 bar pump for use with Enerpac S
and W-Series and other 700 bar torque
wrenches, 115V motor, 8 litres reservoir,
4 wrench manifold, heat exchanger and
A 93 skidbar.
700 bar 4-wrench
manifold (Q)
Refer to the torque wrench pump
B
selection matrix for optimum wrench,
pump and hose combinations.
229
C 95 12
181 414 45 D
483 240 93
630 267 800 bar 4-wrench
manifold (E)
ZU4T-Series Torque Wrench Pumps Page: 206
Reservoir Size A B C D User adjustable relief valve.
(useable litres) Heat Exchanger.
4,0 432 142 279 152 Skidbar.
8,0 495 203 287 167 4-wrench manifold.
www.enerpac.com 213
Air Driven Torque Wrench Pumps Hydraulic Technology Worldwide
PTA-1404
PTA
Series
Reservoir Capacity:
3,8 - 8,0 litres
0,3 - 0,5 l/min
Air Consumption:
1130 - 1840 l/min
700 and 800 bar
• Two-stage pump with automatic bypass for faster torque

cycles
• Remote pendant with safety button for one-man operation Enerpac PTA-3408 Torque Wrench Pump and
• Adjustable pressure relief valve for accurate torque the aluminium HXD-120 torque wrench are
used to perform maintenance on an injection
adjustment and precise repeatability moulding press.
• Transparent overlays in Nm and Ft.lbs, included for Enerpac
torque wrenches produce accurate torque settings and
precise repeatability
• Glycerine filled pressure gauge with scale reading in bar/psi
• Regulator-Filter-Lubricator provides clean, lubricated air and
allows for air pressure adjustment. Steel bowl guards are
standard
• 4,5 m air pendant enables easy manoeuvering at the job site
• With carrying handle for easy portability.
Oil Flow Maximum Pressure Model Usable Air Air Motor Outside
Rate Rating Number Oil Consumption Pressure Size Dimensions
(bar) Capacity at 7 bar air Range
(l/min) @ 3000 RPM
LxWxH
1st 2nd 1st 2nd
stage stage stage stage (litres) (l/min) (bar) (kW) (mm) (kg)
3,30 0,33 120 700 PTA-1404-Q 2,0 1130 3,4 -7,0 1,1 496 x 310 x 449 24
9,83 0,50 70 700 PTA-3408-Q 7,2 1840 3,4 -7,0 3,0 897 x 318 x 589 57
3,30 0,33 120 800 PTA-1404 2,0 1130 3,4 -7,0 1,1 496 x 310 x 449 24
9,83 0,50 70 800 PTA-3408 7,2 1840 3,4 -7,0 3,0 897 x 318 x 589 57
214
High Flow Air Driven Torque Wrench Pump
PMA-62480
PMA
Series
Reservoir Capacity:
8 litres
1,8 l/min
Air Consumption:
3900 l/min
700 and 800 bar
Torque Wrench Pump

• High-output air driven two-stage pump Selection Matrix
• For hazardous environments where explosion proof pumps For optimum speed and
are required performance see the torque
• Adjustable pressure relief valve for accurate torque
matrix.
adjustment and precise repeatability
• Internal safety relief valve prevents accidental over- Page: 206
pressurization
• Glycerine filled pressure gauge with scale reading in bar/psi
• Air operated valve with remote control pendant
• With carrying handles for easy portability
• Heavy duty heat exchanger available; contact Enerpac
For hazardous environments where

explosion proof pumps are required
the air driven PMA-Series torque
wrench pumps is the solution.
Oil Flow Maximum Pressure Model Usable Air Air Motor Outside
Rate Rating Number Oil Consumption Pressure Size Dimensions
(bar) Capacity at 8 bar air Range
(l/min) @ 3000 RPM
LxWxH
1st 2nd 1st 2nd
stage stage stage stage (litres) (l/min) (bar) (kW) (mm) (kg)
11,0 1,8 145 700 PMA-62480-Q 7,5 3900 4-7 3,0 305x205x330 38
11,0 1,8 145 800 PMA-62480 7,5 3900 4-7 3,0 305x205x330 38
www.enerpac.com 215
Hexagon Bolt and Nut Sizes Hydraulic Technology Worldwide
Determine the maximum torque IMPORTANT

according to the bolt (nut) size The hexagon sizes shown in the
and grade. Always consult the tables below should be used as a
manufacturers instructions or guide only. Individual sizes should
engineering recommendations when be checked before specifying any
making bolted connections. equipment.
METRIC SIZES IMPERIAL SIZES
S J S J
D D
Hexagon Thread Hexagon Hexagon Thread Hexagon

Size Size Size Size Size Size
S D J S D J
(mm) (mm) (mm) (inch) (inch) (inch)
17 M 10 8 11/16” 5/8” 1/2”
19 M 12 10 11/4” 3/4” 5/8”
22 M 14 12 17/16” 7/8” 3/4”
24 M 16 14 15/8” 1” 3/4”
27 M 18 14 113/16” 11/8” 7/8”
30 M 20 17 2” 11/4” 7/8”
32 M 22 17 23/16” 13/8” 1”
36 M 24 19 23/8” 11/2” 1”
41 M 27 19 29/16” 15/8” -
46 M 30 22 23/4” 13/4” 1
1 /4”
50 M 33 24 215/16” 17/8” 13/8”
55 M 36 27 3” 2” 11/2”
60 M 39 27 (30) 31/8” 2” 15/8”
65 M 42 32 33/8” 1
2 /4” 13/4”
70 M 45 - 31/2” 21/4” 13/4”
75 M 48 36 33/4” 21/2” 13/4”
80 M 52 36 37/8” 21/2” 17/8”
85 M 56 41 41/8” 23/4” 2”
90 M 60 46 41/4” 23/4” 2”
95 M 64 46 45/8” 3” 21/4”
100 M 68 50 5” 31/4” 21/4”
105 M 72 55
110 M 76 60
Use only Heavy Duty Impact Torque
115 M 80 65 Sockets for power driven Wrench Pump
120 M 85 70 torquing equipment, according Selection
130 M 90 70 (75) to ISO 2725 and ISO 1174; DIN Matrix
135 M 95 - 3129 and DIN 3121 or ASME-B107.2/1995. For optimum
145 M 100 85 speed and performance
150 M 105 - see the torque wrench,
155 M 110 - pump and hose matrix.
165 M 115 - Always make sure that the
170 M 120 - gauge template on the pump
180 M 125 - matches the torque wrench for
accurate torque settings.
185 M 130 -
200 M 140 -
210 M 150 - Page: 206
216
About Enerpac
New: High pressure

hydraulic systems in
structural engineering
The brochure shows a
multitude of
applications of Enerpac
700 bar hydraulics in
Bridge and Structural
Engineering projects around the world.
Clearly describing the system-technology
and tools used in these projects. To obtain
your copy just give us a call, or visit our
Internet site www.enerpac.com
www.enerpac.com Ordering Products and New: Workholding

for latest Enerpac information Catalogs catalog primarily
Visit the Enerpac Web Site and find out To find the name of the closest providing solutions for
about: Enerpac distributor or service the machining and
• Learn more about hydraulics center, to request literature or machine tool industry
• Promotions technical application assistance, and for workpiece
• New products contact Enerpac at one of the holding applications in
• Electronic Catalogs addresses on the next page or many other industries.
• Trade shows pose your question through
• Manuals (instruction and repair sheets) E-mail:
• Nearest Distributors & Service Centers
• Enerpac products in action info@enerpac.com
While every care has been taken in the
• Integrated Solutions preparation of this catalog and all data
contained within is deemed accurate at
the time of printing, Enerpac does
reserve the right to make changes to the
specifications of any product, or
discontinue any product, contained
within this catalog without prior notice.
All illustrations, performance

specifications, weights and dimensions
reflect the nominal values and slight
variations may occur due to
manufacturing tolerances. Please consult
Enerpac if final dimensions are critical.
All information in this catalog can be
changed due to product improvements
without prior notice.
© Copyright 2006, Enerpac.

World Wide Catalog Coverage All rights reserved. Any copying or
Enerpac Catalogs are printed in many languages. If other use of material in this catalog
your requirements call for product use in a different (text, illustrations, drawings, photo’s)
country, please send your request to the applicable without express written consent is
country listed on page 218 or www.enerpac.com – prohibited.
the Enerpac catalog of the country serving your
specific market area will be forwarded promptly.
217
Enerpac Worldwide Locations Hydraulic Technology Worldwide
Africa France Singapore

ENERPAC Middle East FZE ENERPAC Actuant Asia Pte. Ltd.
P.O. Box 18004 Une division de ACTUANT 25 Serangoon North Ave. 5
Jebel Ali, Dubai France S.A. #03-01 Keppel Digihub
United Arab Emirates B.P. 200, Parc d’Activités Singapore 554914
Tel: +971 (0)4 8872686 du Moulin de Massy Thomson Road, P.O. Box 114
Fax: +971 (0)4 8872687 F-91882 Massy CEDEX France Singapore 915704
Tel: +33 1 601 368 68 Tel: +65 64 84 5108
Australia Fax: +33 1 692 037 50 +65 64 84 3737
Actuant Australia Ltd. Fax: +65 64 84 5669
Block V Unit 3 Germany, Austria Toll Free:
Regents Park Estate and Switzerland Tel: +1800 363 7722
391 Park Road ENERPAC GmbH Technical Inquiries:
Regents Park NSW 2143 P.O. Box 300113 techsupport@enerpac.com.sg
(P.O. Box 261) Australia D-40401 Düsseldorf
Tel: +61 297 438 988 Germany South Korea
Fax: +61 297 438 648 Tel: +49 211 471 490 Actuant Korea Ltd.
Fax: +49 211 471 49 28 3Ba 717,
Brazil Shihwa Industrial Complex
Power Packer do Brasil Ltda. India Jungwang-Dong, Shihung-Shi,
Rua dos Inocentes, 587 ENERPAC Hydraulics Kyunggi-Do
04764-050 - Sao Paulo (SP) (India) Pvt. Ltd. Republic of Korea 429-450
Tel: +55 11 5687 2211 Office No. 9,10 & 11, Tel: +82 31 434 4506
Fax: +55 11 5686 5583 Plot No. 56, Monarch Plaza, Fax: +82 31 434 4507
Toll Free in Brazil: Sector 11, C.B.D. Belapur
Tel: 0800 891 5770 Navi Mumbai 400614, Spain and Portugal
vendasbrasil@enerpac.com India ENERPAC
Tel: +91 22 2756 6090 C/San José Artesano 8
Canada Tel: +91 22 2756 6091 Pol. Ind.
Actuant Canada Corporation Fax: +91 22 2756 6095 28108 Alcobendas
6615 Ordan Drive, Unit 14-15 (Madrid) Spain
Mississauga, Ontario L5T 1X2 Italy Tel: +34 91 661 11 25
Tel: +1 905 564 5749 ENERPAC S.p.A. Fax: +34 91 661 47 89
Fax: +1 905 564 0305 Via Canova 4
Toll Free: 20094 Corsico (Milano) The Netherlands, Belgium,
Tel: +1 800 268 4987 Tel: +39 02 4861 111 Luxembourg, Sweden,
Fax: +1 800 461 2456 Fax: +39 02 4860 1288 Denmark, Norway, Finland
Technical Inquiries: and Baltic States
techservices@enerpac.com Japan ENERPAC B.V.
Applied Power Japan Ltd. Galvanistraat 115
China Besshochou 85-7 P.O. Box 8097,
Actuant China Ltd. Saitama-shi, Kita-ku, 6710 AB Ede
1F, 269 Fute N. Road Saitama 331-0821 The Netherlands
Waigaoqiao Free Trade Zone Japan Tel: +31 318 535 911
Pudong New District Tel: +81 48 662 4911 Fax: +31 318 525 613
Shanghai, 200 131 China Fax: +81 48 662 4955 +31 318 535 848
Tel: +86 21 5866 9099 Technical Inquiries Europe:
Fax: +86 21 5866 7156 Middle East, Turkey and techsupport.europe@enerpac.com
Caspian Sea
Actuant China Ltd. (Beijing) ENERPAC Middle East FZE United Kingdom and Ireland
709B Diyang Building P.O. Box 18004, Jebel Ali, Dubai ENERPAC Ltd.,
Xin No. 2 United Arab Emirates Bentley Road South
Dong San Huan North Rd. Tel: +971 (0)4 8872686 Darlaston, West Midlands
Beijing City Fax: +971 (0)4 8872687 WS10 8LQ, England
100028 China Tel: +44 (0)121 50 50 787
Tel: +86 10 845 36166 Russia and CIS Fax: +44 (0)121 50 50 799
Fax: +86 10 845 36220 (excl. Caspian Sea Countries)
Actuant LLC USA, Latin America
Central and Eastern Europe, Admiral Makarov Street 8 and Caribbean
Greece 125212 Moscow, Russia ENERPAC
ENERPAC B.V. Tel: +7-495-9809091 P.O. Box 3241
Galvanistraat 115 Fax: +7-495-9809092 6100 N. Baker Road
P.O. Box 8097 Milwaukee, WI 53209 USA
6710 AB Ede Tel: +1 262 781 6600
The Netherlands Fax: +1 262 783 9562
Tel: +31 318 535 936 User inquiries:
Fax: +31 318 535 951 +1 800 433 2766
+1 800 558 0530
Technical Inquiries:
techservices@enerpac.com
218
Table of Contents Hydraulic Technology Worldwide Model Number Index Section Index

Introduction P- and 11-Series, Pullers 150-163
The World Class Brand ............................ 4-5

Ultra-High Pressure Hand Pumps .... 76-77
PU-Series, Portable Economy Introduction ...................................... 150-151 A E N SPK . . . . . . . . . . . . . . 170
Cylinders
Electric Pumps .................................. 78-79 BHP-Series, Hydraulic Puller Sets .. 152-155 A5-A10 . . . . . . . . . 166 EBJ . . . . . . . . . . . . . . . . 61 NC . . . . . . . . . . . . . . . 186 SQD . . . . . . . . .194-197 Page 6-65
Cylinders (Hydraulic) 6-65 PE-Series, Submerged EP-Series, A12 . . . . . . . . . . . . . . . . 12 ELP . . . . . . . . 174-175 NV . . . . . . . . . . . . . . . . 132 STB . . . . . . . . 180-181
Electric Pumps .................................. 80-83 Mechanical Posi-Lock® Pullers .. 156-159 A13-A28 . . . . . . . . 166 EMB . . . . . . . . . . . . . 174 STC . . . . . . . . . . . . . . 178
Introduction .............................................. 6-7 Z-Class Introduction EPH-Series, A29-A53 . . . . . . . . . . 12 EP. . . . . . . . . . . . 156-159 P STF . . . . . . . . 187-188
RC-Series, Single-Acting Cylinders ....... 8-11 ZE3 - ZE6, ZU4-Series ...................... 84-85 Hydraulic Posi-Lock® Pullers ..... 160-162 A64-A66 . . . . . . . . 124 EPH . . . . . . . 160-163 P . . . . 63, 68, 70, 72 STN . . . . . . . . . . . . . . 186
and Accessories ..................................... 12 ZU4-Series, Electric Pumps ................. 86-89 EPH-Series, 100 ton Posi Lock® A92 . . . . . . . . 166, 177 EPHT . . . . . . . . . . . . 163 P142AL . . . . . . 62-63 STP . . . . . . . . . . . . . . 171
RAC-Series, Single-Acting
Aluminium Cylinders ........................ 14-15
ZE-Series, Electric Pumps.................... 90-95
PP-Series, Electric Pumps
Hydraulic Grip Pullers ......................... 163 A102 . . . . . . . . . . . . . . . 12 EPP . . . . . . . 157-159 P392AL . . . . . . 62-63 SW . . . . . . . . . . . . . . . 188 Pumps
A128-A192 . . . . . 166 EPT . . . . . . . . . . . . . . 160 P392FP . . . . . . . . . . . 75
RACL-Series, Single-Acting (8000- and 9000-Series) .................. 96-97 Tools 164-183 A183. . . . . . . . . . . . . . 146 EPX . . . . . . . . . . . . . . 159 PA . . . . . . . . . . . . . . . . 100 T Page 66-105
Aluminium Lock Nut Cylinders ......... 16-17 PA-Series, Turbo II Air Pumps ............. 98-99 A185 . . . . . . . 146, 166 ER . . . . . . . . . 174-175 PAH . . . . . . . 102-103 T . . . . . . . . . . . . 122-123
RACH-Series, Single-Acting, Aluminium PA-Series, Air Hydraulic Pumps ...... 100-101 Introduction ...................................... 164-165 A200R . . . . . . . . . . . 148 ES . . . . . . . . . . 174-175 PAM . . . . . . . . . . . . . 101 THC . . . . . . . . . . . . . 207
Hollow Plunger Cylinders.................. 18-19 PAH-Series, Air Hydraulic Pumps ... 102-103 MS-Series, Maintenance Sets ......... 166-169 A205-A220 . . . . . 146 PAMG . . . . . . . . 98-99 THQ . . . . . . . . . . . . . 207
RAR-Series, Double-Acting PGM-Series, Atlas Gasoline SP-Series, 35 Ton Hydraulic Punch 170-171 A218. . . . . . . . . . . . . . 166 F PATG . . . . . . . . . 98-99 TM . . . . . . . . . . . . . . . 149
Aluminium Cylinders ......................... 20-21 Powered Pumps ............................ 104-105 LW-Series, Lifting Wedge ........................ 172 A242-A305 . . . . . 166 F . . . . . . . . . . . . 123-124 PARG . . . . . . . . 98-99 TW . . . . . . . . . . . . . . . 189
CLP-Series, Single-Acting
Pancake Cylinders ........................... 22-23 Yellow Pages (Information Section) .106-118
SOH-Series, Hydraulic Machine Lifts ..... 173
ER-Series,
A310, A330. . . . . 146 FH . . . . . . . . . 123-124 PC . . . . . . . 68, 70, 72 System
A530-A595 . . . . . 166 FR . . . . . . . . . . 123-124 PE . . . . . . . . . . . . . 80-83 V
RSM-Series, Single-Acting
Flat-Jac® Cylinders ......................... 24-25 Global Warranty ...................................... 106
Heavy Duty Load Skates .............. 174-175
A, WR-Series, Wedgies and
A604. . . . . . . . . . . . . . 123 FS . . . . . . . . . . . . . . . . 187 PF . . . . . . . . . . . . . . . . . . 92 V . . . . . . 63, 138-139 Components
A607. . . . . . . . . . . . . . 166 FSB . . . . . . . . . . . . . . 188 PGM . . . . . . 104-105 VA2 . . . . . . . . . . . . . . 101
RCS-Series, Single-Acting Introduction and Standards .................... 107 Spread Cylinders ................................. 177 Page 119-132
Safety Instructions ........................... 108-109 A630. . . . . . . . . . . . . . 123 FSH . . . . . . . . . . . . . . 188 PMA . . . . . . 207, 215 VB . . . . . . . . . 142, 148
Low Height Cylinders ....................... 24-25 CM-Series, Storage Cases ..................... 176
Cylinder-Pump Matching and Selection . 110 A650. . . . . . . . . . . . . . 166 FSM . . . . . . . . . . . . . 188 PME . . . . . . 206, 208 VC . . . . . . . . . 134-137
BRC-Series, Single-Acting WHC-WMC-Series,
Pull Cylinders ................................... 26-27 Hydraulic Work Sheet ............................. 111 Cutters & Cutterheads .................. 178-179 AH . . . . . . . . . . . . . . . . 123 FZ . . . . . . . . . . . . . . . . 125 PMU . . . . . . 206, 208 VE . . . . . . . . . . 134-137
BRP-Series, Single-Acting Basic Hydraulic System Set-ups ..... 112-113 STB-Series, Pipe Benders ............... 180-181 AM . . . . . . . . . . . . . . . 124 PP . . . . . . . . . . . . . 96-97 VHJ . . . . . . . . . . . . . . 148
Pull Cylinders ................................... 26-27 Basic Hydraulics .............................. 114-115 DPT, PT-Series, AR . . . . . . . . . . . . . . . . 123 G PT . . . . . . . . . . 182-183 VLP . . . . . . . . 142-143 Valves
RCH-Series, Single-Acting Conversion Tables ................................... 116 Post-Tensioning Tools.................... 182-183 ATM . . . . . . . . . . . . . . 189 G . . . . . . . . . . . 128-129 PTA . . . . . . . 207, 214 VM . . . . . . . . . 134-137
Hollow Plunger Cylinders ................. 28-29 Cylinder Speed Charts ............................ 117 AW . . . . . . . . . . . . . . . . . 12 GA . . . . . . . . . . . . . . . 132 PTE . . . . . . . 206, 209 Page 133-139
RRH-Series, Double-Acting Valve Information ..................................... 118 Bolting Tools 184-216 GF . . . . . . . . . 126-127 PU . . . . . . . . . . . . . 78-79 W
Hollow Plunger Cylinders ................. 30-31 B GP . . . . . . . . . 126-127 W . . . . . . . . . . . 198-201
BRD-Series, Double-Acting System Components 119-132 Introduction....................................... 184-185 BAD . . . . . . . . . . . . . . . 33 R WCB . . . . . . 178-179
Precision Cylinders .......................... 32-33 NC-Series, Hydraulic Nut Splitters ......... 186 BFZ . . . . . . . . . . . . . . 125 H RAH . . . . . . . . 196-197 WHC . . . . . . . . . . . . 178
RR-Series, Double-Acting Introduction ............................................. 119 FS-Series, Hydraulic Flange Spreaders .. 187 BHP . . . . . . . 152-155 H . . . . 120, 128-129 RAC . . . . . . . . . . . . . . . . 14 WHR . . . . . . . . . . . . 178
Long Stroke Cylinders ...................... 34-37 700-Series, High Pressure Hoses .... 120-121 FSH, FSM-Series, Wedge Spreaders ..... 188 BLS . . . . . . . . . . . 56-57 HA . . . . . . . . . . . . . . . . 121 RACH . . . . . . . . . . . . . . 18 WMC . . . . . . . . . . . . 179 Presses
CLSG-Series, Single-Acting A, C, F, T-Series, Couplers ............... 122-123 ATM-Series, Flange Alignment Tools ...... 189 BPR . . . . . . . 144-145 HB . . . . . . . . . . . . . . . 121 RACL . . . . . . . . . . . . . . 16 WR . . . . . . . . . . . . . . . 177
High Tonnage Cylinders ................... 38-41 HF-Series, Hydraulic Oil .......................... 124 S-Series, Square Drive Steel BRC . . . . . . . . . . 26-27 HC . . . . . . . . . . . . . . . 121 RAR . . . . . . . . . . . . . . . . 20 Page 140-149
CLS-Series, Single-Acting A, AM-Series, Manifolds ......................... 124 Torque Wrenches .......................... 190-193 BRD . . . . . . . . . . 32-33 HF . . . . . . . . . . . . . . . . 124 RB . . . . . . . . . . . . . . . . . 12 Z
High Tonnage Cylinders ................... 42-45 FZ, BFZ-Series, Fittings .......................... 125 SQD-Series, Square Drive Aluminium BRP . . . . . . . . . . . 26-27 HP . . . . . . . . . . . . 29, 31 RC . . . . 8-12, 62-63 Z . . . . . . . . . . . . . . . . . . 123
CLRG-Series, Double-Acting GP, GF-Series, Force Gauges ......... 126-127 Torque Wrenches .......................... 194-197 BSS . . . . . . . . 90, 148 HR . . . . . . . . . 204-205 RCH . . . . . . . . . . 28-29 ZC . . . . . . . . . . . . . 92-93
High Tonnage Cylinders ................... 46-49 G, H-Series, Pressure Gauges ........ 128-129 W-Series, Steel Hexagon Cassette BZ . . . . . . . . . 180-181 HXD . . . . . . . . 202-205 RCS . . . . . . . . . . 24-25 . . . . . . . . . . . . . . . 133-135
CLL-Series, Single-Acting T-Series, Test System Gauges ................ 130 Torque Wrenches........................... 198-201 REB . . . . . . . . . . . . . . . 12 ZE . . . . . . . . 85, 90-95
Lock Nut Cylinders ........................... 50-53 DGR-Series, Digital Gauges .................... 131 HXD-Series, Aluminium Hexagon C I REP . . . . . . . . . . . . . . . 12 ZH . . . . . . . . . . . . . . . . . 93 Pullers
SLS-Series, Synchronous Systems ..... 54-55 GA-Series, Gauge Accessories ............... 132 Cassette Torque Wrenches............ 202-205 C . . . . . . . . . . . . . . . . . . 123 IN . . . . . . . . . . 204-205 RFL . . . . . . . . . . . . . . . . 98 ZL . . . . . . . . . . . . . . . . . . 92
BLS, SL-Series, Stage Lift Systems .... 56-57 Torque Wrench & Pump - Hose CAT . . . . . 12, 25, 41 IPL . . . . . . . . . . . . . . . 148 RR . . . . . . . . . . . . . 34-37 ZP . . . . . . . . . . . . . 92-93 Page 150-163
SHS-Series, SyncHoist, Valves 133-139 Selection Matrix............................. 206-207 CAT . . . . . 49, 45, 53 RRH . . . . . . . . . . 30-31 ZU4 . . . . . . . . . . . 84-89
Load Positioning Systems ............... 58-59 PME, PMU-Series, Portable Electric CATG . . . . . . . . 15, 17 J RSM . . . . . . . . . . 24-25 ZU4T . . . . . . . . . . . . 207
JH, JHA-Series, Introduction ............................................. 133 Torque Wrench Pumps.......................... 208 . . . . . . . . . . . 21, 41, 49 JBI . . . . . . . . . . . . . . . . . 12 RWH . . . . . . . . . . . . 152 . . . . . . . . . . . . . . 210-213
Steel and Aluminium Jacks .................... 60 3-Way Directional Control Valves .... 134-135 PTE-Series, Portable Electric CC . . . . . . . . . 202-205 JH . . . . . . . . . . . . . . . . . . 60 ZR . . . . . . . . . . . . . . . . . 92
EBJ-Series, Steel Bottle Jacks ................. 61 4-Way Directional Control Valves .... 136-137 Torque Wrench Pumps.......................... 209 CD . . . . . . . . . . . . . . . 123 JHA . . . . . . . . . . . . . . . . 60 S
RC-Series, High Temperature & Pressure and Flow Control Valves ... 138-139 ZU4T-Series, Electric CH . . . . . . . . 123, 194 S . . . . . . . . . . . . 190-193 11. . . . . . . . . . . . . . . 76-77 Tools
Corrosion Resistant Products .......... 62-63 Torque Wrench Pumps .................. 210-213 CLL . . . . . . . . . . . 50-53 L SB . . . . 92, 172, 188 25A- . . . . . . . 196-197
SC-Series, Cylinder-Pump Sets .......... 64-65 Hydraulic Presses 140-149 PTA-Series, Air Driven CLP . . . . . . . . . . . 22-23 LH . . . . . . . . . . . . . . . . 149 SCH . . . . . . . . . . 64-65 41- . . . . . . . . . . . . . . . . . 77 Page 164-183
Torque Wrench Pumps.......................... 214 CLRG . . . . . . . . 46-49 LW . . . . . . . . . . . . . . . 172 SCL . . . . . . . . . . . 64-65 43- . . . . . . . . . . 77, 130
Pumps (Hydraulic) 66-105 Introduction ...................................... 140-141 PMA-Series, High Flow Air Driven CLS . . . . . . . . . . . 42-45 SCP . . . . . . . . . . . 64-65 45- . . . . . . . . . . . . . . . . . 77
VLP-Series, Bench and Torque Wrench Pumps.......................... 215 CLSG . . . . . . . . . 38-41 M SCR . . . . . . . . . . 64-65 50A- . . . . . . . 196-197
Introduction .......................................... 66-67 Workshop Presses ........................ 142-143 Bolt, Nut and Thread Sizes ..................... 216
CM . . . . . . . . . . . . . . . 176 MP . . . . . . . . . . . . . . . . . . 74 SDA . . . . . . . 192-193 72- . . . . . . . . . . . . 76-77
P-Series, Lightweight Hand Pumps .... 68-69 BPR-Series, Roll Frame Presses ..... 144-145
CR . . . . . . . . . . . . . . . 123 MS . . . . . . . . . . 166-169 SHS . . . . . . . . . . . 58-59 83- . . . . . . . . . . 77, 130
P-Series, Steel Hand Pumps ............... 70-71
P-Series, Low Pressure Hand Pumps . 72-73
A-Series, C-Clamps Arbor Presses . 146-147
Press Accessories ................................... 148 About Enerpac 217
CW . . . . . . . . . . . . . . . 168 MSP . . . . . . . . . . . . . 171 SL . . . . . . . . . . . . . 56-57 75A- . . . . . . . 196-197 Bolting Tools
MZ . . . . . . . 1568-169 SLS . . . . . . . . . . . 54-55 100A- . . . . . 196-197
MP-Series, Multifluid Hand Pumps ........... 74 LH-Series, Load Cells ............................. 149 Enerpac Worldwide Locations 218
D SOH . . . . . . . . . . . . . 173 160A- . . . . . 196-197
Page 184-216
P-Series, Foot Pump.................................. 75 TM-Series, Tension Meters ..................... 149 Model Number Index 219
DGR ............. 131 SP . . . . . . . . . . 170-171 270A- . . . . . 196-197
DPT ....... 182-183 SPD . . . . . . . . . . . . . . 171
2 www.enerpac.com 219
Africa
E325e
Tel: +971 (0)4 8872686 - Fax: +971 (0)4 8872687 E325e E325e
Australia
Actuant Australia Ltd.
Hydraulic Technology Worldwide Tel: +61 297 438 988 – Fax: +61 297 438 648
Brasil
Power Packer do Brasil Ltda.
Tel: +55 11 5687 2211 – Fax: +55 11 5686 5583
Toll Free:
Cylinders Tel: 0800 891 5770
Canada
Hydraulic Power
Page 6-65 Actuant Canada Corporation
Tel: +1 905 564 5749 – Fax: +1 905 564 0305
Toll Free:
Tel: +1 800 268 4987 – Fax: +1 800 461 2456
for all Industrial Applications
China
Actuant China Ltd.
Tel: +86 21 5866 9099 – Fax: +86 21 5866 7156
Tel: +86 10 845 36166 – Fax: +86 10 845 36220
Pumps Central and Eastern Europe, Greece
Applied Power International S.A.
Page 66-105 Tel: +31 318 535 936 – Fax: +31 318 535 951
France
Hydraulic Power for all Industrial Applications

ENERPAC
Une division de ACTUANT France s.a.
System Tel: +33 1 601 368 68 – Fax: +33 1 692 037 50
Germany, Austria and Switzerland
Components ENERPAC, GmbH

Tel: +49 211 471 490 – Fax: +49 211 471 49 28
India
Page 119-132 ENERPAC Hydraulics (India) Pvt. Ltd.
Tel: +91 22 2756 6090 – Fax: +91 22 2756 6095
Tel: +91 22 2756 6091
Italy
ENERPAC S.p.A.
Tel: +39 02 4861 111 – Fax: +39 02 4860 1288
Valves Japan
Applied Power Japan Ltd.
Tel: +81 48 662 4911 – Fax: +81 48 662 4955
Page 133-139 Middle East, Turkey and Caspian Sea

Tel: +971 (0)4 8872686 – Fax: +971 (0)4 8872687
Russia and CIS

(excl. Caspian Sea Countries)
Tel: +7-495-9809091 – Fax: +7-495-9809092
Presses Singapore
Actuant Asia Pte. Ltd.
Tel: +65 64 84 5108 – Fax: +65 64 84 5669
Tel: +65 64 84 3737
Page 140-149 Toll Free:
Tel: +1800 363 7722
South Korea
Actuant Korea Ltd.
Tel: +82 31 434 4506 – Fax: +82 31 434 4507
Spain and Portugal
Pullers ENERPAC
Tel: +34 91 661 11 25 – Fax: +34 91 661 47 89
The Netherlands, Belgium, Luxembourg, Sweden,

Page 150-163 Denmark, Norway, Finland and Baltic States
ENERPAC B.V.
Tel: +31 318 535 911 – Fax: +31 318 525 613
+31 318 535 848
United Kingdom and Ireland

ENERPAC Ltd.
Tel: +44 (0)121 50 50 787 – Fax: +44 (0)121 50 50 799
Tools USA, Latin America and Caribbean

ENERPAC
Tel: +1 262 781 6600 – Fax: +1 262 783 9562
Page 164-183
User inquiries:
+1 800 433 2766
+1 800 558 0530
Bolting Tools For a complete list of addresses see page 218

or
internet: www.enerpac.com
Page 184-216 e-mail: info@enerpac.com
00750GB © Enerpac 01-2006

Printed in the Netherlands. www.actuant.com

Eng Enerpac PDF

Uploaded by

Copyright:

Available Formats

Eng Enerpac PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Eng Enerpac PDF

Uploaded by

Copyright:

Available Formats

Africa

Hydraulic Power for all Industrial Applications

System Tel: +33 1 601 368 68 – Fax: +33 1 692 037 50

Germany, Austria and Switzerland

Components ENERPAC, GmbH

Page 133-139 Middle East, Turkey and Caspian Sea

Russia and CIS

Spain and Portugal

The Netherlands, Belgium, Luxembourg, Sweden,

United Kingdom and Ireland

Tools USA, Latin America and Caribbean

Bolting Tools For a complete list of addresses see page 218

00750GB © Enerpac 01-2006

The World Class Brand ............................ 4-5

Work with Enerpac to the most exacting

• Systems Solutions range of products to our

ENERPAC hydraulic cylinders are available in Hardened Saddle

holding... whatever the force capacity, stroke length, or

suit your high force application. Golden Ring

without galling cylinder parts.

The exclusive Golden

resists wear and rust.

Ring Design is a unique bearing design

which absorbs eccentric load stresses to

protect your cylinder against abrasion,

over-extending or plunger blow-outs and

As a result, Golden Ring cylinders

provide long, trouble-free operation.

without galling cylinder parts.

Plunger Return Spring

Capacity 1) Stroke Range Cylinder type and functions Series Page

General Purpose Cylinders,

1,4-150 76-508 Aluminium and Steel Jacks JHA, JH 60

RC cylinder mounting attachments greatly

QUICK SELECTION CHART Capacity:

Cylinder Stroke Model Cylinder Oil Collapsed Extended Outside

RC-50 16 RC-50** 6,5 10 41 57 58***

Page: 117 700 bar

Model Nr. Base Plate Dimensions (mm) B D

Model Nr. Mounting Block Dimensions (mm) H G H

Type Model Nr. Clevis Eye Dimensions (mm)

Removable Hardened Saddle, protects plunger from Page: 14

Plunger Return Spring on all single-acting models Page: 18

Shown from left to right: RAC-5010, RAC-15010, RAC-304, RAC-208

Lightweight Hand Pumps

• Composite bearings prevent metal-to-metal contact,

Cylinder Bolt Thread Thread Page: 62

156 174 224 85 63,0 50,0 27 40 3 3,6 RAC-202

Shown from left to right: RACL-1006, RACL-504, RACL-5010

• Handles standard on all models

Steel Base Plate Mounting Holes H Z

354 236 286 130 95,0 Tr 80 x 4 30 50 3 50 9,3 RACL-502

Shown from left to right: RACH-1504, RACH-15010, RACH-206, RACH-306

Lightweight Hand Pumps

• High strength return spring for rapid cylinder retraction

Shown from left to right: RAR-5010, RAR-308, RAR-204

50 RAR-502 496 187 70,9 26,7 354 134

201 251 145 95,0 75,0 30 56 50 3 11,1 RAR-502

Shown from left to right: CLP-2002, CLP-5002

RC-50 16 RC-50 6,5 10 41 57 58*