In this article, we will go through the Order to Cash cycle.

The below are the steps in short:

 Enter the Sales Order

 Book the Sales Order
 Launch Pick Release
 Ship Confirm
 Create Invoice
 Create the Receipts either manually or using Auto Lockbox ( In this article we will concentrate on
Manual creation)
 Transfer to General Ledger
 Journal Import
 Posting

Let’s get into the details of each step mentioned above.

Enter the Sales Order:

Navigation:Order Management Super User Operations (USA)>Orders Returns >Sales Orders

Enter the Customer details (Ship to and Bill to address), Order type.
 Click on Lines Tab. Enter the Item to be ordered and the quantity required.

Line is scheduled automatically when the Line Item is saved.Scheduling/unscheduling can be done
manually by selecting Schedule/Un schedule from the Actions Menu.

You can check if the item to be ordered is available in the Inventory by clicking on Availability Button.

Save the work.

Underlying Tables affected: In Oracle, Order information is maintained at the header and line level.

The header information is stored in OE_ORDER_HEADERS_ALL and the line information in

OE_ORDER_LINES_ALL when the order is entered. The column called FLOW_STATUS_CODE is
available in both the headers and lines tables which tell us the status of the order at each stage.

At this stage, the FLOW_STATUS_CODE in OE_ORDER_HEADERS_ALL is ‘Entered’

Book the Sales Order: Book the Order by clicking on the Book Order button.

Now that the Order is BOOKED, the status on the header is change accordingly.
Underlying tables affected:

At this stage:The FLOW_STATUS_CODE in the table OE_ORDER_HEADERS_ALL would be

‘BOOKED’ The FLOW_STATUS_CODE in OE_ORDER_LINES_ALL will be ‘AWAITING_SHIPPING’.

Record(s) will be created in the table WSH_DELIVERY_DETAILS with RELEASED_STATUS=’R’ (Ready

to Release) Also Record(s) will be inserted into WSH_DELIVERY_ASSIGNMENTS.

At the same time DEMAND INTERFACE PROGRAM runs in the background and inserts into
MTL_DEMAND

Launch Pick Release:

Navigation:

Shipping > Release Sales Order > Release Sales Orders.

Key in Based on Rule and Order Number

In the Shipping Tab key in the below:

Auto Create Delivery: Yes, Auto Pick Confirm: Yes , Auto Pack Delivery: Yes

In the Inventory Tab:

Auto Allocate: Yes

Enter the Warehouse

Click on Execute Now Button.

On successful completion, the below message would pop up as shown below.

Pick Release process in turn will kick off several other requests like Pick Slip Report,

Shipping Exception Report and Auto Pack Report

Underlying Tables affected:

If Autocreate Delivery is set to ‘Yes’ then a new record is created in the table WSH_NEW_DELIVERIES.

DELIVERY_ID is populated in the table WSH_DELIVERY_ASSIGNMENTS.

The RELEASED_STATUS in WSH_DELIVERY_DETAILS would be now set to ‘Y’ (Pick Confirmed) if Auto
Pick Confirm is set to Yes otherwise RELEASED_STATUS is ‘S’ (Release to Warehouse).

Pick Confirm the Order:

IF Auto Pick Confirm in the above step is set to NO, then the following should be done.
Navigation:

Inventory Super User > Move Order> Transact Move Order

In the HEADER tab, enter the BATCH NUMBER (from the above step) of the order. Click FIND. Click on
VIEW/UPDATE Allocation, then Click TRANSACT button. Then Transact button will be deactivated then
just close it and go to next step.

Ship Confirm the Order:

Navigation:Order Management Super User>Shipping >Transactions.

Query with the Order Number.

Click On Delivery Tab

Click on Ship Confirm.
The Status in Shipping Transaction screen will now be closed.

This will kick off concurrent programs like.INTERFACE TRIP Stop, Commercial Invoice, Packing Slip
Report, Bill of Lading
Underlying tables affected:

RELEASED_STATUS in WSH_DELIVERY_DETAILS would be ‘C’ (Ship Confirmed)

FLOW_STATUS_CODE in OE_ORDER_HEADERS_ALL would be “BOOKED“

FLOW_STATUS_CODE in OE_ORDER_LINES_ALL would be “SHIPPED“

Create Invoice:

Run workflow background Process.

Navigation:Order Management >view >Requests

Workflow Background Process inserts the records RA_INTERFACE_LINES_ALL with

INTERFACE_LINE_CONTEXT = ’ORDER ENTRY’

INTERFACE_LINE_ATTRIBUTE1= Order_number

INTERFACE_LINE_ATTRIBUTE3= Delivery_id
and spawns Auto invoice Master Program and Auto invoice import program which creates Invoice for
that particular Order.

The Invoice created can be seen using the Receivables responsibility

Navigation:Receivables Super User> Transactions> Transactions … Query with the Order Number as
Reference.
Underlying tables:

RA_CUSTOMER_TRX_ALL will have the Invoice header information. The column

INTERFACE_HEADER_ATTRIBUTE1 will have the Order Number.

RA_CUSTOMER_TRX_LINES_ALL will have the Invoice lines information. The column

INTERFACE_LINE_ATTRIBUTE1 will have the Order Number.

Create receipt:

Navigation:Receivables> Receipts> Receipts

Enter the information.

Click on Apply Button to apply it to the Invoice.

Underlying tables:AR_CASH_RECEIPTS_ALL

Transfer to General Ledger:

To transfer the Receivables accounting information to general ledger, run General Ledger Transfer
Program. Navigation:Receivables> View Requests

Parameters:

 Give in the Start date and Post through date to specify the date range of the transactions to be
transferred.
 Specify the GL Posted Date, defaults to SYSDATE.
 Post in summary: This controls how Receivables creates journal entries for your transactions in the
interface table. If you select ‘No’, then the General Ledger Interface program creates at least one
journal entry in the interface table for each transaction in your posting submission. If you select ‘Yes’,
then the program creates one journal entry for each general ledger account.
 If the Parameter Run Journal Import is set to ‘Yes’, the journal import program is kicked off
automatically which transfers journal entries from the interface table to General Ledger, otherwise
follow the topic Journal Import to import the journals to General Ledger manually.

.
Underlying tables:

This transfers data about your adjustments, chargeback, credit memos, commitments, debit memos,
invoices, and receipts to the GL_INTERFACE table.

Journal Import:

To transfer the data from General Ledger Interface table to General Ledger, run the Journal Import
program from Oracle General Ledger.

Navigation:General Ledger > Journal> Import> Run

Parameters:

 Select the appropriate Source.

 Enter one of the following Selection Criteria:

No Group ID: To import all data for that source that has no group ID. Use this option if you specified a
NULL group ID for this source.

All Group IDs: To import all data for that source that has a group ID. Use this option to import multiple
journal batches for the same source with varying group IDs.

Specific Group ID: To import data for a specific source/group ID combination. Choose a specific
group ID from the List of Values for the Specific Value field.

If you do not specify a Group ID, General Ledger imports all data from the specified journal entry
source, where the Group_ID is null.

 Define the Journal Import Run Options (optional)

Choose Post Errors to Suspense if you have suspense posting enabled for your set of books to post
the difference resulting from any unbalanced journals to your suspense account.
 Choose Create Summary Journals to have journal import create the following:

• one journal line for all transactions that share the same account, period, and currency and that has a
debit balance

• one journal line for all transactions that share the same account, period, and currency and that has a
credit balance.

 Enter a Date Range to have General Ledger import only journals with accounting dates in that range.
If you do not specify a date range, General Ledger imports all journals data.
 Choose whether to Import Descriptive Flexfields, and whether to import them with validation.

Click on Import button.

Underlying tables:

GL_JE_BATCHES, GL_JE_HEADERS, GL_JE_LINES

Posting:

We have to Post journal batches that we have imported previously to update the account balances in
General Ledger. Navigation:General Ledger> Journals > Enter., Query for the unposted journals for a
specific period as shown below.

From the list of unposted journals displayed, select one journal at a time and click on Post button to post
the journal.
If you know the batch name to be posted you can directly post using the Post window

Navigation:General Ledger> Journals> Post

Underlying tables:

GL_BALANCES.