Eee
Eee
Eee
BILL OF QUANTITY
BOQ
Amateur Pavilion
King Fahd University of Petroleum and Minerals
Dhahran, KSA
Division 1
GENERAL REQUIREMENTS
BOQ
The Quantities set out in the Bills of Quantities are deemed to have been
verified by the Contractor as being the quantities of the whole works
1-1-2 required to be executed by him in accordance with the Contract Drawings INCLUDED
and will be subject to re-measurement on completion. The Contractor shall
price the BOQ as per the quantities indicated.
SUB TOTAL
Contractor must have an approval from the Client for using materials not
specified herein in the event that the materials specified is not available in
1-1-7 INCLUDED
the market. This shall also apply to any other changes raised by the
Contractor on special cases.
All the items work mentioned in the contract shall be the followed strictly to
fulfill the requirements laid down under the Basic of drawing" in the type of
1-1-8 equipment, materials, method of installations, testing, and type of condition INCLUDED
shall be in accordance with the specifications drawings relevant to local and
international applicable standards.
The unit price of items of work in the Bill of Quantities (BOQ) shall include al
1-1-9 INCLUDED
costs related to the following, unless mentioned separately.
The Works provided for in the Contract shall include but not be limited to
1-2-2 INCLUDED
the carrying out and completion of all works.
SUB TOTAL
The Contractor is to make his own arrangements for access to the site and
1-3-1 to the Works both for his own use and for the use of sub-Contractors and INCLUDED
suppliers, whether nominated or otherwise.
The Contractor shall provide on site weatherproof sheds and storage for the
1-4-1 materials intended for the works. The Contractor shall remove the same on
completion of the works.
All quantities contained within the Bills of Quantities are intended to give a
1-6-1 INCLUDED
reasonable indication of the works shown on the Drawings
SUB TOTAL
The Contractor shall satisfy himself as to the meaning of every item in the
Bills of Quantities and the rates and prices inserted by him will be deemed
to cover all his obligations under the Contract and all matters and things
1-7-1 INCLUDED
necessary for the proper construction, completion and maintenance of the
Works (including, but not by way of limitation), for all temporary works
required (including any that may be required by sub-Contractors).
The price shall include for all materials and labor and for the provision and
use of all plant-whether mechanical or non - mechanical - required for the
expeditious carrying out of the works in their proper sequence-for shifting,
altering and adapting such temporary work and plant as may be required
1-7-2 INCLUDED
during the progress of the works and removing at completion and making
good any surfaces disturbed. No claim for additional payment will be
allowed for any error or misunderstanding by the Contractor in these
respects
The Drawings as provided with the Tender Documents are for the
Contractor's use in the preparation of his Tender. These drawings are
1-8-1 subject to modifications and additions in order to provide further detailing or INCLUDED
information not shown at this stage but deemed to be necessary for the
proper execution and completion of the works.
SUB TOTAL
Allow for providing during the period of the Contract all plants & tools,
machinery, equipment, scaffolding, shoring & tools including cranes, lifting
1-10-1 equipment & site transport and for all plants & scaffolding required for INCLUDED
specific trades as required by the Contract Work-including trades & Works
carried out by Subcontractors and Suppliers
The Contractor shall supply clean water for the Works including the Works
of sub-Contractors and shall supply all temporary plumbing pipework and
storage tanks that my be required pending the laying of the permanent
1-11-1 water main or the availability thereof and shall pay all fees for connections INCLUDED
and all charges for water consumed. In the event of a piped water supply
not being readily available at the Site the Contractor will be required at his
own expense to transport water to the Site by bowser.
SUB TOTAL
The Contractor shall allow for protection of all existing services and utilities
1-15-1 INCLUDED
either above or underground.
The Contractor shall be responsible for and make allowances for all
1-16-1 INCLUDED
necessary earthworks, and setting out of the Work for all trades.
SUB TOTAL
1-19 Insurance
The Contractor shall allow for the provision of progress photographs for the
1-20-1 INCLUDED
duration of the Contract
SUB TOTAL
The Contractor shall allow for the preparation and processing of complete
1-21-1 shop drawings, tests and samples and for all trades as required and gets INCLUDED
approval before commencement of work.
The Contractor shall allow for the preparation and processing of all as-built
drawings, catalogues, operating booklets, maintenance data, etc.. In both
1-22-1 INCLUDED
soft and hard copies and submit to client's representative as they may be
required.
Upon completion of all works the contractor shall submit three (3) sets of as
built drawings (hard copies)+ Mylar as-built drawings set and one (1)
1-22-2 electronic copy on CD to the Client. These drawings shall include all
deviations from the contract drawings including dimensions, quantities,
materials and products.
1-23 Records
During the progress of the works the Contractor shall keep at his own cost,
records of all details and dimensions of the works as constructed and shall
1-23-1 INCLUDED
at any time submit such of the records to the Client's Representative as
they may be required.
The Contractor shall allow for the removal of all arisings located at the Site
1-24-1 prior to commencement of the Works and at completion including reinstate INCLUDED
all items or structures affected by the construction adjacent or in site.
SUB TOTAL
The Contractor shall allow for the removal of all arising located at the Site
1-27-1 prior to commencement of the Works and at completion including reinstate
all items or structures affected by the construction adjacent or in site.
The Contractor shall allow the Employer or any patty authorized by him to
occupy and use any part of the Works as soon as in the opinion of the
Engineer such part or parts can be so occupied and used without impeding
1-28-1 INCLUDED
the progress or completion of the Works and such occupation shall not in
any way alter the period fixed for completion of the Works or the liability of
the Contractor
SUB TOTAL
Allow for the cost of applying strict safety regulations and providing,
1-29-1 INCLUDED
executing all safety measures and staff.
Allow for protection of installed work and of existing works and for all
1-29-2 INCLUDED
security measures and controls.
Allow for complying with all laws, including traffic regulations and
1-29-3 INCLUDED
restrictions of the Kingdom of Saudi Arabia.
Allow for maintenance and reinstate all roads affected by traffic to and from
1-29-4
the works site.
Allow for noise and pollution controls and for complying with all statutory
1-29-5 INCLUDED
obligations.
SUB TOTAL
0
g Existing manhole to be demolished / modification no 11 0
0
h Existing valve box to be demolished / modification no 6 0
0
i 600mm dia. Storm water drainage pipe to be removed lm 210 0
SUB TOTAL 0
Re-route all the existing utilities passing under the site. Re-routing must
utilize the materials same as existing. After re route clear the site from
0
abandoned utilities . The work for re routing includes excavation, setting
out, preparatory works , as per drawing SIT-CIV-107.001
SUB TOTAL 0
SUB TOTAL 0
All exploratory test holes and all cavities found are to be injected under
pressure of at least two bars using injection machine until it is completely
2.05 lot 1 0
full. The fill is of cement and sand of water content of 0.8 with necessary
chemicals according to specifications regarding this subject.
Re-scanning the same area again after grout injection to confirm the filling
2.06 lot 1 0
of cavities
0
2.07 Termite Treatment 0
Termite treatment for excavated area as required by the Engineer to
a lot 1 0
horizontal surfaces complete.
0
SUB TOTAL 0
All asphalt works shall apply as shown and detailed on drawing GEN-CIV-
004, including 50mm thk asphalt concrete pavement wearing/surface
a m2 3,660 0
course, on tack coat RC-250, on 70 mm thk asphalt concrete binder course,
on prime coat MC-70, on 200mm thk base course
2.09 GRAVEL: 0
100mm thk gravel surfacing under 150mm thk compacted crushed stone m2 1,103 0
0
2.10 SIDEWALKS: 0
80mm thk interlock pavers, on 50mm thk on compacted sand m2 1,555 0
0
2.11 CURBSTONE: 0
Provide precast concrete curbstone including footings lm 750 0
0
2.12 LANDSCAPING: 0
All landscaping works include soil mixt, trees, shrubs, fertilizers, sticks, etc.
0
as approved by engineers and as per drawings.
0
a Ground cover Qatif grass m2 365 0
0
b Shrubs natal plum (Carissa Grandiflora) lm 169 0
0
c Shrubs wild jasmine (Clerodenron Inerme) lm 138 0
0
d Neem Tree (Azederacha Indica) no 17 0
0
e Indian Laurel Tree (Ficus Nitada) no 6 0
0
f California Fan Palm (Washingtonia Filifera) no 7 0
0
g Date Palm Tree (Phoenix Dactylifera) no 15 0
SUB TOTAL 0
c 65mm dia, raw water piping (PVC) including pipes and fittings lm 40 0
d 75mm dia, raw water piping (PVC) including pipes and fittings lm 20 0
e 100mm dia, raw water piping (PVC) including pipes and fittings lm 50 0
f 100mm dia, Irrigation main pipe line (PVC) including pipes and fittings lm 480 0
SUB TOTAL 0
g 100mm dia, Fire water pipe line (RTR) including pipes and fittings lm 50 0
h 150mm dia, Fire water pipe line (RTR) including pipes and fittings lm 90 0
i 200mm dia, Fire water pipe line (RTR) including pipes and fittings lm 430 0
0
100mm dia, Sanitary sewer pipe (GRAVITY PVC) including pipes and
j lm 50 0
fittings
200mm dia, Sanitary sewer pipe (GRAVITY PVC) including pipes and
k lm 135 0
fittings
l 150mm dia, Storm drainage pipes and fittings lm 45 0
0
m 200mm dia, Storm drainage pipes and fittings lm 10 0
0
n 300mm dia, Storm drainage pipes and fittings lm 66 0
0
o 500mm dia, Storm drainage pipes and fittings lm 115 0
0
p 600mm dia, Storm drainage pipes and fittings lm 46 0
0
q 800mm dia, Storm drainage pipes and fittings lm 126 0
0
2.16 UNDER GROUND UTILITES: 0
Provide Sanitary manholes, Storm drainage manholes, Catch Basin,
Drainage trench, Fire hydrant and outfall structure valve box, complet with 0
all necessary fittings.
a Valve box no 9 0
b Sanitary manholes including frames and covers no 5 0
c Storm drainage manholes including frames and covers (CDMH) no 10 0
d Modification existing Storm Drainage Manhole no 2 0
e Catch basin complete with heavy duty grating no 3 0
SUB TOTAL 0
0
15 KV THREE CORE 630MM2 COPPER CONDUCTOR CABLE XLPE
b
INSULATED COPPER TAPE ARMOURED PVC SHEATHED
LM 36 0
0
15 KV OUTDOOR TYPE CABLE TERMINATION KIT SUITABLE FOR 630MM2
c
COPPER THREE CORE CABLE
EA 12 0
0
0
0
SUB TOTAL 0
The contractor shall submit shop drawings and method of statement whole
excavation works for the Client of engineer's approval before commencing 0
any work and should verify at site the actually dimension to be excavated.
The contractor is obligated to scan the site at foundation level by a
specialist investigation company which has this experience using ground
penetrating radar (GPS) instrument upto ten (10) meters to explore any 0
cavity at site area.
Result of the undergr
0
02.02 BACKFILLING AND COMPACTION: 0
Perform filling around footings, retaining walls and with approved materials
a and ordinary fill including compaction to required density as per M3 2,988 0
specification section 02221.
0
b Perform sellect fill compacted at elevator place and where required M3 363 0
0
0
0
0
0
0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
Supply and install Block work hollow with maximum strength 3 N/mm2 and
max. density 750 kg/m3, bedded and jointed in cement and sand mortar
including all necessary fixing accessories, fire zones , Approved galvanized
expanded metal at abutments of blockwork and concrete, Approved 0
galvanized flat strip wall ties at angles and intersections of block work all as
specified and as shown on the drawings:, hollow, except where stated
otherwise.
0
a 100mm block work wall m2 150 0
0
b 150mm blockwork wall m2 1407 0
0
c 200mm blockwork wall m2 1860 0
0
d 300mm blockwork wall m2 2384 0
0
0
0
0
0
0
0
SUB TOTAL 0
TOTAL OF MASONRY 0
Division 5
METAL WORKS
BILL OF QUANTITY
Supply, fabricate, transport and install steel work for roof as per drawings
including all items as per structural / architectural drawings and
specifications, including rigid trusses, support, rafters, tube purlin, base
plates, connection plates, truss beams, framed openings members, steel
TON 995 0
ladder, landing, handrails, hot dip galvanized bolts, galvanized high strength
bolts, 1.0 mm thick metal decking; complete roof system areas as required,
flashing, gutters for drainage and all necessary accessories for construction
requirements of steel roof and as per specifications.
0
0
0
0
0
0
SUB TOTAL 0
SUB TOTAL 0
Division 6
WOOD AND PLASTIC
BILL OF QUANTITY
Supply and install trespa flat panel 13mm thk. (For wall partitions and doors
for toilet areas) on 30% thermosetting resins, homogeneously reinforced
lm 148 0
with 70% cellulose fires. with 2 cm under cut below, ironmongery and all
fixing accessories, all as specified and as shown on the drawings.
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
SUB TOTAL 0
Division 7
THERMAL AND MOISTURE PROTECTION
BILL OF QUANTITY
Supply and install composite of artificial grass on 50mm thk crushed stone
on non- woven geotextile filtration mat, on 100 mm thk rigid insulation, on 2
horizontal ply EPDM water proofing membrane 4mm each, on light weight
concrete screed 50mm thk; complete with maximum high Skirting
b m2 1,098 0
Waterproofing Membrane fixed into groove with Aluminum Flashing and
Platter stop and with all fixing accessories and dressing around drains
pipes and openings, necessary overlaps etc. as per approved
manufacturer's instructions. To flat roofs, roofing
0
0
0
0
0
0
0
SUB TOTAL 0
Applied Sealer and 3 coats Water proofing paint / water & salt repellant
concrete to the roof areas at level +14.35, as shown per wall section on
c m2 2920 0
drawing APV-ARC-132; complete as per specifications and as per
approved manufacturer's instruction. For toilet and water tank.
Supply and install Water proofing to wet areas including water proofing
membrane (two layers of bituminous membranes 4mm each) ; concrete
d screed; cant strip, membrane vertical upstand etc; complete as per m2 66 0
drawings, specifications and as per approved manufacturer's instruction.
For toilet and water tank.
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
SUB TOTAL 0
Division 8
DOORS AND WINDOWS
BILL OF QUANTITY
Type D 02, 1800 mm x 2950 mm, double Leaf Swing hollow core type,
powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm thc.,for
8.01.03 No. 5 0
the external & internal with polyurethane foam insulation including complete
accessories and all hard ware accessories as per specs and drawings .
Type D 03, 1800 mm x 2950 mm, double Leaf Swing hollow core type, 90
minutes Fire Rated powder coated, hot dipped, galvanized Steel Sheet ,
8.01.04 with 1.2 mm thc.,for the external & internal with polyurethane foam No. 3 0
insulation including complete accessories and all hard ware accessories as
per specs and drawings .
0
Type D 04, 1800 mm x 2350 mm, double Leaf Swing hollow core type,
powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm thc.,for
8.01.05 No. 12 0
the external & internal with polyurethane foam insulation including complete
accessories and all hard ware accessories as per specs and drawings .
SUB TOTAL 0
Type D 06, 1800 mm x 2350 mm, double Leaf Swing hollow core type ,
powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm thc.,for
8.01.06 No. 21 0
the external & internal with polyurethane foam insulation including complete
accessories and all hard ware accessories as per specs and drawings .
Type D 07, 3050 mm x 2350 mm, Roll-Up door type, powder coated, hot
8.01.07 dipped, galvanized Steel Sheet , including complete accessories and all No. 5 0
hard ware accessories as per specs and drawings .
Type D 08, 2800 mm x 3900 mm, Sliding double Leaf hollow core type,
powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm thc.,for
8.01.08 No. 4 0
the external & internal with polyurethane foam insulation including complete
accessories and all hard ware accessories as per specs and drawings .
Type D 11, 1800 mm x 2150 mm, Sliding double Leaf hollow core type,
powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm thc.,for
8.01.09 No. 2 0
the external & internal with polyurethane foam insulation including complete
accessories and all hard ware accessories as per specs and drawings .
Type D 13, 800 mm x 2150 mm, single leaf, swing type, hollow core type,
powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm thc.,for
8.01.10 No. 8 0
the external & internal with polyurethane foam insulation including complete
accessories and all hard ware accessories as per specs and drawings .
Type D 14, 900 mm x 2200 mm, Sliding single Leaf hollow core type,
powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm thc.,for
8.01.11 No. 3 0
the external & internal with polyurethane foam insulation including complete
accessories and all hard ware accessories as per specs and drawings .
Type D 15, 900 mm x 2150 mm, single leaf, swing type, hollow core type,
powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm thc.,for
8.01.12 No. 10 0
the external & internal with polyurethane foam insulation including complete
accessories and all hard ware accessories as per specs and drawings .
SUB TOTAL 0
Type D 16, 1200 mm x 2350 mm, double Leaf Swing hollow core type,
powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm thc.,for
8.01.13 No. 1 0
the external & internal with polyurethane foam insulation including complete
accessories and all hard ware accessories as per specs and drawings .
0
Type D 19, 2050 mm x 2350 mm, double leaf, swing type, hollow core
type, powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm
8.01.14 thc.,for the external & internal with polyurethane foam insulation including No. 1 0
complete accessories and all hard ware accessories as per specs and
drawings .
0
Type D 20, 700 mm x 2150 mm, single leaf, swing type, hollow core type,
powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm thc.,for
8.01.15 No. 1 0
the external & internal with polyurethane foam insulation including complete
accessories and all hard ware accessories as per specs and drawings .
Type D 21, 1000 mm x 2150 mm, single leaf, swing type, hollow core type,
powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm thc.,for
8.01.16 No. 1 0
the external & internal with polyurethane foam insulation including complete
accessories and all hard ware accessories as per specs and drawings .
Type D 22, 2700 mm x 2700 mm, Sliding double Leaf hollow core type,
powder coated, hot dipped, galvanized Steel Sheet , with 1.2 mm thc.,for
8.01.17 No. 4 0
the external & internal with polyurethane foam insulation including complete
accessories and all hard ware accessories as per specs and drawings .
0
0
0
0
0
0
0
SUB TOTAL 0
Type D 12, 1000 mm x 2150 mm, Hinged single Leaf 16mm thk, clear
8.02.02 glass, single glazed, frameless door type including complete accessories No. 6 0
and all hard ware accessories as per specs and drawings .
Type D 17, 1100 mm x 2100 mm, Hinged single Leaf 16mm thk, clear
8.02.03 glass, single glazed, on powder coated, aluminum frame including complete No. 6 0
accessories and all hard ware accessories as per specs and drawings .
0
Type D 18, 800 mm x 2400 mm, Hinged single Leaf Low-E-coated double
glazed, tinted glass door type, on powder coated, aluminum frame,
8.02.04 No. 2 0
including complete accessories and all hard ware accessories as per specs
and drawings .
0
0
0
0
0
0
0
0
0
0
0
0
0
0
SUB TOTAL 0
Supply and install solid core paneled door on solid wood frame complete
with sub-frame, architrave, painting, ironmongery and all necessary fixing 0
accessories and all hard ware accessories as per specs and drawings .
Type D 05 1800mm x 2350 mm Solid Core Double Leaf , solid oak wood
8.03.01 No. 3 0
frame ,as per specs and drawings .
0
8.04 Phenolic Doors 0
0
Type D 10 700mm x 2220 mm Phenolic paneled doors complete with steel
8.04.01 No. 70 0
kick plate, as per specs and drawings .
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
Division 9
FINISHES
BILL OF QUANTITY
Perforated Metal Tiles ceiling 300 x 1200mm (with water proofing in lay with
9.01.03 acoustic pad insulation 300 mm x 600 mm by Laxalon / Armstrong or other m2 678 0
equal approved and fire resistance 1 hour if required).
0
Supply and install Composite Aluminum Suspended Cladding Panels
100mm thk, with all necessaries wall angles, tees, etc.. including
9.01.04 m2 3100 0
suspensions systems; profiles, moulds, etc., complete as per drawings &
specifications .
0
0
0
0
0
SUB TOTAL 0
Supply and Install the following floor finishes, the price shall include surface
preparation, cement sand bedding / backing / approved waterproof
0
adhesive as required. Allow for all sundry items necessary for the proper
completion as shown in drawings & specification
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
0
9.08 Spider Glass 0
Supply and install Clear Glass single glazing, 16mm thk glass structure
system, frameless design,(Composite Spider glass wall system) complete
9.08.01 m2 1050 0
with all fittings and accessories, etc., complete as per drawings &
specifications .
0
9.08 Painting and Decorating 0
9.08.01 Supply and install 0
Prime and apply 2 coats offenomastic silk on 2 coats stucco filler on 1 coat
acrylic primer for all internal rendered walls and fair face concrete (see 0
specs Jotun washable Paint)
a internal walls m2 7,682 0
0
Prime and apply 2 coats offenomastic silk on 2 coats stucco filler on 1 coat
9.08.02 acrylic primer for all internal fair face concrete ceiling (see specs Jotun 0
washable Paint)
a Soffits of ceiling m2 3,524 0
0
0
0
0
0
0
SUB TOTAL 0
TOTAL OF FINISHES 0
Division 10
SPECIALITIES
BOQ
SUB TOTAL 0
SUB TOTAL 0
TOTAL OF SPECIALITIES 0
Division 11, 12
EQUIPMENES & FURNITURES
BILL OF QUANTITY
Supply and install all Equipments complete with all fittings, supports, all
a accessories and finishes at location shown and listed on drawings APV- LOT 1
ARC-113/001 and drawing no. APV-ARC-114/001
12 FURNITURES:
Supply and install all Furnitures complete with all fittings, supports, all
a accessories and finishes at location shown and listed on drawings APV- LOT 1
ARC-113/001 and drawing no. APV-ARC-114/001
SUB TOTAL 0
Division 13
SPECIAL CONSTRUCTION
BILL OF QUANTITY
Division 14
CONVEYING SYSTEMS
BOQ
0
passenger elevator, ( PL 01 ) with (1) stop 0
1-1
( Weight 840 kg & speed 1m/s ) No. 2 0
0
0
0
0
0
0
0
0
0
0
0
SUB TOTAL 0
Division 15
MECHANICAL AND PLUMBING WORKS
BOQ
AHU shall be Chilled water type, suited for indoor installation. Horizontal
Draw thru unit. AHU frame shall be double skin construction, with mixing
box and return air damper. Pre-filter and bag filter section. Blower section
with high performance (DWDI) Centrifugal Fan and Backward airfoil
impeller. AHU shall be provided with drip eliminators and Ultra Violet
15.01.01 disinfection lamp with UVC emitter and arc length shall not be less than 10 0
micro W/m2, at one meter in a 400 frm air stream of 45F (to be integrated
with BMS). Cooling coils shall be copper tubes and aluminum fins.
Corrosion resistance and micro-organism adhesion coating. Unit
configuration shall be top inlet and top discharge. Provide internal acoustic
lining (KCL) for all main streams from AHU's.
AHU-01-F ( 7975 LPS, 1138 Pa. TSP, 193.0 kW total COOLING CAP.),
a EA 1 1 0
AHU motor shall be provided with VFD (Variable Frequency Drive).
AHU-02-F ( 3805 LPS, 1331 Pa. TSP, 160.0 kW total COOLING CAP.),
b EA 1 1 0
with Electric Heater ( 60.0 kW/ 3 stages )
AHU-03-F ( 8190 LPS, 1284 Pa. TSP, 330.0 kW total COOLING CAP.),
c EA 1 1 0
with Electric Heater ( 114.0 kW/ 5 stages )
AHU-04-F ( 5685 LPS, 1337 Pa. TSP, 259.0 kW total COOLING CAP.),
d EA 1 1 0
with Electric Heater ( 90.0 kW/ 5 stages )
AHU-01-G ( 6111 LPS, 1268 Pa. TSP, 157.0 kW total COOLING CAP.),
e EA 1 1 0
with Electric Heater ( 78.0 kW/ 3 stages )
0
AHU-02-G ( 7161 LPS, 1477 Pa. TSP, 217.0 kW total COOLING CAP.), with
f EA 1 1 0
Electric Heater ( 90.0 kW/ 5 stages )
SUB TOTAL 0
FCU-06.G ( 433 LPS, 100 Pa. ESP, 3.0 kW heater, 10.02 kW total cool.
f EA 1 1 0
cap.)
FCU-07.G ( 174 LPS, 100 Pa. ESP, 2.0 kW heater, 4.31 kW total cool.
g EA 1 1 0
cap.)
FCU-08.G ( 433 LPS, 100 Pa. ESP, 3.0 kW heater, 7.23 kW total cool.
h EA 1 1 0
cap.)
FCU-01.F/02.F ( 433 LPS, 100 Pa. ESP, 3.0 kW heater, 11.96 kW total
i EA 2 2 0
cool. cap.)
0
15.01.03 VAV (VARIABLE AIR VOLUME) TERMINAL BOX 0
PRESSURE INDEPENDENT DDC CONTROLLED, COMPLETE WITH
THERMOSTAT & MULTI-STAGE HEATER CONTROLLER.
0
VAV-01.G/02.G/03.G/04.G (648 lps max.; 194 lps min.; 4.5 kW/ 2 stage
EA 4 4 0
heater)
VAV-01.F (892 lps max.; 268 lps min.; 8.0 kW/ 3 stage heater) EA 1 1 0
VAV-02.F/04.F/05.F/06.F/08.F&09.F (575 lps max.; 173 lps min.; 5.0 kW/ 2
EA 6 6 0
stage heater)
VAV-03.F (160 lps max.; 48 lps min.; 1.5 kW/ 1 stage heater) EA 1 1 0
VAV-07.F (717 lps max.; 215 lps min.; 5.0 kW/ 2 stage heater) EA 1 1 0
VAV-10.F (164 lps max.; 49 lps min.; 2.5 kW/ 1 stage heater) EA 1 1 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
Control system for AHU, VAV, EF and related components; Complete with
DDC controller, temperature sensors, differential pressure switches, 0
humidistats, thermostats, cables, conduits and all necessary accessories.
0
15.01.45 TAB 0
- TEST & AIR BALANCING WORK OF HVAC SYSTEM LOT 1 0
TEST EQUIPMENT & TAB REPORT 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
SUB TOTAL 0
WALL CLEANOUT
4" Dia 1
6" Dia 3
CATCH BASIN
4" Dia 1
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
15.03.01 PIPES: 0
Fire Water Steel Pipe: ASTM A53 Sch. 40, galvanized Steel Pipe complete
with all necessary fittings, supports, hangers, accessories, painting etc.
Pipe joint for 3" and above shall be grooved type similar to Victaulic / 0
SHUR-joint type, other joints shall be threaded. Sizes and lengths are as
follows:
a 10" dia. LM 16 25 0
b 8" dia. LM 32 512 0
c 6" dia. LM 85 135 0
d 4" dia. LM 340 313 0
e 2" dia. LM 291 138 0
f 1½" dia. LM 205 189 0
g 1¼" dia. LM 197 170 0
h 1" dia. LM 1693 930 0
0
15.03.02 SPRINKLER 0
a Sprinkler Head Upright type EA 11 114 0
b Sprinkler pendant type EA 329 232 0
0
15.03.03 SPARE SPRINKLER 0
CABINET W/ 12-SPARE SPRINKLERS & WRENCH SET 1 0
0
15.03.04 ALARM CHECK VALVE ASSEMBLY 0
Alarm check valve assembly 8" dia., including all trims, retarding chambers,
a water alarm gong, drain valves, supply and system pressure gauges, and SET 1 1 0
all other accessories to complete the system.
0
15.03.05 AUXILARY DRAIN & TEST VALVE 0
Globe Valve Class 150, 1" dia. EA 4 4 0
SUB TOTAL 0
SUB TOTAL 0
EFP-01, Electric Fire Pump, Centrifugal End Suction Type UL/FM Listed,
a 1500 GPM @ 300 Ft. Head, 200 HP, 380 Volt, 3-PH, 60 HZ, complete with SET 1 1 0
all necessary valves, fittings and controller in compliance with NFPA-20
0
15.03.19 JOCKEY PUMPS: 0
JP-01 Electric Jockey Pump, Vertical In-line pump UL/FM Listed, 150 GPM
a @ 300 Ft. Head, 20 HP, 380 Volt, 3-PH, 60 HZ, complete with all necessary SET 1 1 0
valves, fittings and controller in compliance with NFPA-20
0
15.03.20 DIESEL ENGINE DRIVEN FIRE PUMP: 0
a DEF-01 Diesel Engine Driven Pump SET 1 1 0
UL/FM Listed, 1500 GPM @ 300 Ft. Head, complete with 0
all necessary valves, fittings and controller in compliance with 0
NFPA-20 0
0
15.03.21 EXHAUST MUFFLER 0
a 8" DIA. Steel Pipe with insulation and aluminum LM 12 12 0
Cladding 0
0
15.03.22 FM-200 SYSTEM FOR THE FOLLOWING ROOM: 0
a Electrical rooms G005, G033, G049 & F005 SET 3 0
b Control room G013 SET 1 0
0
0
0
0
0
SUB TOTAL 0
Division 16
ELECTRICAL WORKS
BILL OF QUANTITY
Ceiling surfacemounted LED lighting luminaire fixed out control gear with
white painted steel body and curved precision extruded clear prismatic
e EA 4 0
polycarbonate diffuser 1520 x 217 x 90 mm with 35 watts LED lamps 4650
output lumens type "L2"
Ceiling/ surface mounted high bay LED lighting luminaire with anodised
aluminum extrusion housing and high grade aluminum reflector 390 x 330
g EA 41 0
x114 mm with, 48 watts LED lamps 12600 output lumens and 4000k color
temperature type "L3".
0
SUB TOTAL 0
Ceiling -recessed mounted LED lighitng luminaire with slim 19mm profile
sheet steel white body and UV stabilized glare protech prismatic optic
j EA 93 0
diffuser 597 x 1597 x 12 mm with 41 watts LED lamps 4100 output lumens
and 4000K color temperature type "L5"
Surface mounted LED lighting luminaire with 20 watts LED lamps 6150
l EA 40 0
output lumens and 4000K color temperature Type" L6"
Ceiling pendant mounted high bay LED lighting luminaire with die cast
aluminum housing in matt white powder coated cooling ribs for optimum
n EA 139 0
management and minimal dust accumulation high efficinecy optical lens
657x330x 125mm with 180.4watts LED lamps
0
0
SUB TOTAL 0
Ceiling pendant mounted high bay LED lighting luminaire with die cast
aluminum housing in matt white powder coated cooling ribs for optimum
x EA 4 0
management and minimal dust accumulation high efficinecy optical lens
390x330x 114mm with 139watts LED lamps
0
SUB TOTAL 0
Wall Forms Round Perimeter LED Lighting Fixture with Half Face, Internal
i1 EA 23 0
Primed, 15 Watts System, type "W".
0
0
0
0
0
0
0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
0
17 20A, 3P LIGHTING CONTACTOR WITH HAND-OFF-AUTOMATIC SWITCH EA 10 0
18 PHOTOELECTRIC CELL, ROOF-MOUNTED EA 2 0
0
0
19 VARIABLE FREQUENCY DRIVE, NEMA 12 ENCLOSURE, 400V EA 4 0
3 PHASE, 20 HP AHU LOAD 0
0
20 VARIABLE FREQUENCY DRIVE, NEMA 12 ENCLOSURE, 400V EA 1 0
3 PHASE, 15 HP AHU LOAD 0
0
20A VARIABLE FREQUENCY DRIVE, NEMA 12 ENCLOSURE, 400V EA 1 0
3 PHASE, 25 HP AHU LOAD 0
0
0
0
0
0
0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
Fire Alarm Control Panel (FACP) ,Addressable complete with 4-hour battery
a back-up. FACP shall be configured to interface with MOXA module EA 1 0
hardware with dedicated ethernet port provision
b Smoke detector, Photoelectric Addressable EA 86 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0
SUB TOTAL 0