March 2013

Process Industry Practices

Piping

PIP PNDMV007
Butterfly Valve Data Sheet and Standard Terms
 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

In an effort to minimize the cost of process industry facilities, this Practice has
been prepared from the technical requirements in the existing standards of major industrial
users, contractors, or standards organizations. By harmonizing these technical requirements
into a single set of Practices, administrative, application, and engineering costs to both the
purchaser and the manufacturer should be reduced. While this Practice is expected to
incorporate the majority of requirements of most users, individual applications may involve
requirements that will be appended to and take precedence over this Practice.
Determinations concerning fitness for purpose and particular matters or application of the
Practice to particular project or engineering situations should not be made solely on
information contained in these materials. The use of trade names from time to time should
not be viewed as an expression of preference but rather recognized as normal usage in the
trade. Other brands having the same specifications are equally correct and may be
substituted for those named. All Practices or guidelines are intended to be consistent with
applicable laws and regulations including OSHA requirements. To the extent these
Practices or guidelines should conflict with OSHA or other applicable laws or regulations,
such laws or regulations must be followed. Consult an appropriate professional before
applying or acting on any material contained in or suggested by the Practice.

This Practice is subject to revision at any time.

© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas
at Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies
and Subscribers may copy this Practice for their internal use. Changes or modifications of any
kind are not permitted within any PIP Practice without the express written authorization of
PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or
exceptions to specific sections of PIP Practices. Authorized Users may provide their clients,
suppliers and contractors with copies of the Practice solely for Authorized Users’ purposes.
These purposes include but are not limited to the procurement process (e.g., as attachments to
requests for quotation/ purchase orders or requests for proposals/contracts) and preparation
and issue of design engineering deliverables for use on a specific project by Authorized
User’s client. PIP’s copyright notices must be clearly indicated and unequivocally
incorporated in documents where an Authorized User desires to provide any third party with
copies of the Practice.

PRINTING HISTORY
March 2013 Issued

Not printed with State funds

 March 2013

Process Industry Practices

Piping

PIP PNDMV007
Butterfly Valve Data Sheet and Standard Terms
Table of Contents
1. Introduction ..................................2
1.1 Purpose ..............................................2
1.2 Scope .................................................2

2. Requirements ...............................2

Data Form
PNDMV007-D Butterfly Valve Data Sheet

Process Industry Practices Page 1 of 7

PIP PNDMV007
Butterfly Valve Data Sheet and Standard Terms March 2013

1. Introduction

1.1 Purpose
This Practice provides a data sheet and standard terms used for specifying butterfly valves.

1.2 Scope
This Practice describes, in table format, the standard terms used in the drop down menus
of the PIP butterfly valve data sheet appended to this Practice.

1.3 Additional New Standard Terms

This first issue of this Practice contains only those standard terms used in PIP Valve
Description Practices. In addition to new standard terms added by PIP as required to
support new valve descriptions, future publications of this Practice may also contain
additional valve description terms that are in general valve industry usage but not in the
PIP Valve Descriptions Practices. Additional standard terms associated with non-PIP
valve descriptions may be submitted to the PIP office at info@pip.org for consideration
for adoption into this Practice.

2. Requirements
Table 1 provides standard terms for specifying the characteristics of a butterfly valve using the
PIP PNDMV007-D Data Sheet. The terms are included in drop down menus for each cell in the
data sheet.
Table 1 – Butterfly Valve Characteristics Standard Terms

Characteristic Standard Terms

Valve Size Range NPS 1/8 NPS 3-1/2 NPS 22 NPS 44 NPS 78
(Min.) NPS 1/4 NPS 4 NPS 24 NPS 46 NPS 84
NPS 3/8 NPS 5 NPS 26 NPS 48 NPS 90
NPS 1/2 NPS 6 NPS 28 NPS 50 NPS 96
NPS 3/4 NPS 8 NPS 30 NPS 52 NPS 102
NPS 1 NPS 10 NPS 32 NPS 54 NPS 108
NPS 1-1/4 NPS 12 NPS 34 NPS 56 NPS 120
NPS 1-1/2 NPS 14 NPS 36 NPS 58 NPS 144
NPS 2 NPS 16 NPS 38 NPS 60
NPS 2-1/2 NPS 18 NPS 40 NPS 66
NPS 3 NPS 20 NPS 42 NPS 72
Valve Size Range NPS 1/8 NPS 3-1/2 NPS 22 NPS 44 NPS 78
(Max.) NPS 1/4 NPS 4 NPS 24 NPS 46 NPS 84
NPS 3/8 NPS 5 NPS 26 NPS 48 NPS 90
NPS 1/2 NPS 6 NPS 28 NPS 50 NPS 96
NPS 3/4 NPS 8 NPS 30 NPS 52 NPS 102
NPS 1 NPS 10 NPS 32 NPS 54 NPS 108
NPS 1-1/4 NPS 12 NPS 34 NPS 56 NPS 120
NPS 1-1/2 NPS 14 NPS 36 NPS 58 NPS 144
NPS 2 NPS 16 NPS 38 NPS 60
NPS 2-1/2 NPS 18 NPS 40 NPS 66
NPS 3 NPS 20 NPS 42 NPS 72

Process Industry Practices Page 2 of 7

PIP PNDMV007
Butterfly Valve Data Sheet and Standard Terms March 2013

Table 1 – Butterfly Valve Characteristics Standard Terms (continued)

Characteristic Standard Terms

Valve Size NPS 1/8 NPS 3-1/2 NPS 22 NPS 44 NPS 78
NPS 1/4 NPS 4 NPS 24 NPS 46 NPS 84
NPS 3/8 NPS 5 NPS 26 NPS 48 NPS 90
NPS 1/2 NPS 6 NPS 28 NPS 50 NPS 96
NPS 3/4 NPS 8 NPS 30 NPS 52 NPS 102
NPS 1 NPS 10 NPS 32 NPS 54 NPS 108
NPS 1-1/4 NPS 12 NPS 34 NPS 56 NPS 120
NPS 1-1/2 NPS 14 NPS 36 NPS 58 NPS 144
NPS 2 NPS 16 NPS 38 NPS 60
NPS 2-1/2 NPS 18 NPS 40 NPS 66
NPS 3 NPS 20 NPS 42 NPS 72

Service - Class Cryogenic High pressure Low temperature

Flammable High temperature Toxic
General or utility Lethal

Service - Fluid Air - instrument Nitric acid

Type Air - plant LNG
Ammonia - anhydrous liquid Oxygen
Butane - liquid Propane
Carbon Dioxide - dry Sewer sanitary - forced/gravity
Carbon Dioxide - wet Steam, condensate
Crude oil - sour Sulphur - liquid
Crude oil - sweet Water - boiler feed
Fuel gas Water - fresh, cooling tower; Water
Fuel oil - demineralized
Glycol Water - fire - AG
Hydrochloric acid Water - fire - BG
Lube oil Water - potable
Nitrogen Water - sea

End Connection - Compression Lugged Wafer

Type Flanged Threaded Welded

End Connection - Bolt holes tapped MJ RF, Molded

Style Bolt holes untapped Oversized reducing Roll Grooved
BW flange SW
Ferrule tube Push On Tubing
FF RF

End Connection - ANSI/AWWA C110/A21.10 ASME B16.25

Ends Standard ANSI/AWWA C111/A21.11 ASME B16.47
API 609 ASME B16.47 Series B
ASME B1.20.1 ASME B16.5
ASME B16.1 ASME B16.5 Class 125
ASME B16.1 Class 125 ASME B16.5 Class 150
ASME B16.11 Mfg std

End Connection - ASME B16.5 Mfg std Other

Flange Face
Finish Std

Process Industry Practices Page 3 of 7

PIP PNDMV007
Butterfly Valve Data Sheet and Standard Terms March 2013

Table 1 – Butterfly Valve Characteristics Standard Terms (continued)

Characteristic Standard Terms

Pressure Rating - ASME 75 ASME 250 ASME 800 ASME 2500
Class ASME 125 ASME 300 ASME 900 ASME 4500
ASME 150 ASME 400 ASME 1500 ASME 6000
ASME 200 ASME 600 ASME 2000 Mfg std

Body/Bonnet Vinyl Ester – Graphite DI, PPS Coating ITCS

Material - Reinforced CPVC SS
Body - CI PP - type 1 CK3MCuN
Material DI PVC Zirconium
DI, Epoxy Coating CS

Body/Bonnet A105 A351-CF8M A536-65-45-12

Material - A126-B A351-CK3MCuN B550-UNS-R60705
Body - ASTM A182-F316 A352-LCB B752-UNS-R60705
Number A216-WCB A352-LCC D1784-12454
A350-LF2-CL-1 A395

Body/Bonnet Annealed Forged Other

Material - Body Cast Heat treated
- Die formed Precipitation hardened
Manufacturing
Process

Trim Material - PFA

General PTFE
Material

Trim Material - Aluminum Bronze DI, EDPM Coating DI, CS, PFA Lining
Disc - Material Vinyl Ester – Graphite PFA Lining CS, PTFE Lining
Reinforced DI, PTFE Lining SS
CI CPVC 316 SS
CI, PFA Lining PP Zirconium
CI, PTFE Lining PVC

Trim Material - A126-B A351-CK3MCuN B148

Disc - ASTM A182-F44 A395 B148-UNS-C84400
Number A276-UNS-S31600 A48-40 B550-UNS-R60705
A351-CF8M A536-65-45-12 B752-UNS-R60705

Trim Material - Mfg std EPDM PTFE 316 SS, Hard

Seat - Material Buna-N RTFE 316 SS Facing

Trim Material - Mfg std EPDM PTFE 316 SS, Hard

Seat Insert - Buna-N RTFE 316 SS Facing
Material

Trim Material - Mfg std 17-4 PH SS 316 SS

Stem - SS w/Molded Zirconium
Material 17-4 PH SS Graphite/Vinyl Ester

Process Industry Practices Page 4 of 7

PIP PNDMV007
Butterfly Valve Data Sheet and Standard Terms March 2013

Table 1 – Butterfly Valve Characteristics Standard Terms (continued)

Characteristic Standard Terms

Trim Material - A126-B A351-CK3MCuN B148
Stem - ASTM A182-F44 A395 B148-UNS-C84400
Number A276-UNS-S31600 A48-40 B550-UNS-R60705
A351-CF8M A536-65-45-12 B752-UNS-R60705

Trim Material - Laminated SS

Disc Seal Ring Solid SS
- Material

Type & Design - Double-flanged Lug Wafer

Body - Type

Type & Design - Concentric High performance Triple offset

Design

Operation - Gear Handwheel – oval Lever - hi-hub with

Manual Handle Lever lockout
Operator Handle - T-bar Lever - bellcrank Post indicator
Handwheel

Operation - Electric - motor Hydraulic - pneumatic Pneumatic

Provided Hydraulic
Actuator

Stem Packing & Asbestos-free FKM - Kalrez PTFE

Stem Seals - Graphite Viton, PTFE Coating PTFE, Filled
Packing Flexible Graphite FKM TFE
Material Alloy C PFA 316 SS
Buna-N PFA – virgin
EPDM RTFE

Stem Packing & Anti-extrusion rings Lantern ring P energized seal

Stem Seals - Corrosion inhibited Packing box purged
Packing Specs

Stem Packing & Annealed Forged Precipitation hardened

Stem Seals - Cast Heat treated Other
Packing Mfr Die formed
Proc

Stem Packing & Asbestos-free FKM - Kalrez PTFE

Stem Seals - Graphite Viton, PTFE Coating PTFE, Filled
Stem Seal Flexible Graphite FKM TFE
Matl Alloy C PFA 316 SS
Buna-N PFA – virgin
EPDM RTFE

Stem Packing & Bellows seal Laminated V-ring - twin

Stem Seals - Braided rings Solid V-ring - vacuum
Stem Seal Diaphragm V-ring - standard
Type

Process Industry Practices Page 5 of 7

PIP PNDMV007
Butterfly Valve Data Sheet and Standard Terms March 2013

Table 1 – Butterfly Valve Characteristics Standard Terms (continued)

Characteristic Standard Terms

Body/Bonnet Asbestos-free EPDM TFE 347 SS
Gaskets - Graphite FKM 304H SS 347H SS
Gasket - Flexible Graphite RTFE 316 SS
Material Alloy B2 PTFE 321 SS
Mica PTFE, Filled 321H SS

Body/Bonnet O-ring Ring Joint Spiral wound

Gaskets - Ring Solid flat
Gasket - Form

Body/Bonnet API 600 API 602 ASME B16.20

Gaskets -
Gasket -
Standard

Other Seals - Asbestos-free FKM - Kalrez PTFE

Body - Graphite Viton, PTFE Coating PTFE, Filled
Material Flexible Graphite FKM TFE
Alloy C PFA 316 SS
Buna-N PFA – virgin
EPDM RTFE

Other Seals - Diaphragm O-ring Solid

Body - Type

Other Seals - Asbestos-free FKM - Kalrez PTFE

Seat - Material Graphite Viton, PTFE Coating PTFE, Filled
Flexible Graphite FKM TFE
Alloy C PFA 316 SS
Buna-N PFA – virgin
EPDM RTFE

Other Seals - Diaphragm O-ring Solid

Seat - Type

Body/Bonnet CS 304 SS
Bolting - Bolts SS Steel Alloy
- Material

Body/Bonnet A193 A193-B16 A320-L7

Bolting - Bolts A193, as applicable A193-B7 B408-UNS-N08811
- ASTM
Number

Body/Bonnet CS 304 SS
Bolting - Nuts - SS Steel Alloy
Material
Body/Bonnet A194 A194-2H A194-4
Bolting - Nuts - A194, as applicable A194-3 B564-UNS-N08811
ASTM Number

Process Industry Practices Page 6 of 7

PIP PNDMV007
Butterfly Valve Data Sheet and Standard Terms March 2013

Table 1 – Butterfly Valve Characteristics Standard Terms (continued)

Characteristic Standard Terms

Body/Bonnet Heavy hex
Bolting - Nuts -
Type

Standards - API 609 API 609 - B, as Mfg std

Design API 609 - A applicable MSS SP-67
API 609 - B ASME B16.34 UL - FM
AWWA C504

Standards - API 609 - A AWWA C504 Mfg std

Dimensions API 609 - B ISO 5752 - short
API 609 - B – short ISO 5752 - long
pattern

Standards - ASME B16.1 AWWA C504

Rating ASME B16.34 Mfg std

Standards - API 598 API 603

Testing API 600 API 608

Standards - Fire API 607 Fire tested

Safe API 6FA Fire tested for external leakage
Specification

Process Industry Practices Page 7 of 7

 Butterfly Valve Data Sheet PNDMV007-D
Catalog Name Current valve of
Valve Code Number Revision
Owner/Role/URL Purchaser

PIP Catalog Valve Number PIP Valve Size Range (Min/Max)

PIP Revision PIP Valve Size

Recommended Manufacturer/Supplier Valve Details Valve Size / Range

Company Name URL Model Number Drawing Number Size Min Max Approved Date Remarks

Purchaser Line Classes

Sub-catalog Class Sub-catalog Class Sub-catalog Class Sub-catalog Class

Purchaser Alternative Valve Codes

Sub-catalog Code Sub-catalog Code Sub-catalog Code Sub-catalog Code

Service
Class/Fluid Type Detailed desc.
Service Temp (Min/Max) °F Pressure (Min/Max) psi
User service names

PIP Line Class

End Connection Type Style Ends Standard Remarks

Flange Face Finish Standard Ra(LRL/URL) μm

Pressure Rating
Pressure psi g Class Remarks

Body Material Trim Material

Material ASTM Number Material ASTM Number
Body General
Manufacturing Process Disc
Seat
Seat insert
Stem
Remarks Disc seal ring
Pins or wedges
Seat energizer
Seat retainer
Retainer screws
Remarks

Type and Design

Type Remarks
Body No. of pieces Body

Design Remarks
Extended Bonnet for Cryogenic Service Trim

Operation Manual Operator Provided Actuator Remarks

Stem Packing and Stem Seals

Mfg Std Material Type Remarks
Stem Seal
2ndry
Mfg Std Material Specifications Remarks
Packing
Manufacturing Process V-rings Low Emission

Body-Bonnet Gaskets
Mfg Std Material Form Gasket Standard Remarks
Gasket

Other Seals
Mfg Std Material Type Remarks
Body
Seat

Body-Bonnet Bolting
Mfg Std Material ASTM Number Remarks
Bolts Type
Nuts

Standards
Design & Rating
Dimension (face to face) Testing
Fire Safe Specification
Oxygen Cleaned per CGA C-4.1 and G-4.4/ASTM G-93 Remarks

Additional Information
Face to Face Dimension in Valve Orientation Inclination Angle deg
Centerline to Operator Top ft Dry Weight lb (from horizontal)
Notes