PNDMV09N

March 2013
Process Industry Practices

Piping
PIP PNDMV09N
Needle Valve Data Sheet and Standard Terms
PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

In an effort to minimize the cost of process industry facilities, this Practice has
been prepared from the technical requirements in the existing standards of major industrial
users, contractors, or standards organizations. By harmonizing these technical requirements
into a single set of Practices, administrative, application, and engineering costs to both the
purchaser and the manufacturer should be reduced. While this Practice is expected to
incorporate the majority of requirements of most users, individual applications may involve
requirements that will be appended to and take precedence over this Practice.
Determinations concerning fitness for purpose and particular matters or application of the
Practice to particular project or engineering situations should not be made solely on
information contained in these materials. The use of trade names from time to time should
not be viewed as an expression of preference but rather recognized as normal usage in the
trade. Other brands having the same specifications are equally correct and may be
substituted for those named. All Practices or guidelines are intended to be consistent with
applicable laws and regulations including OSHA requirements. To the extent these
Practices or guidelines should conflict with OSHA or other applicable laws or regulations,
such laws or regulations must be followed. Consult an appropriate professional before
applying or acting on any material contained in or suggested by the Practice.
This Practice is subject to revision at any time.
Process Industry Practices (PIP), Construction Industry Institute, The University of Texas
at Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies
and Subscribers may copy this Practice for their internal use. Changes or modifications of any
kind are not permitted within any PIP Practice without the express written authorization of
PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or
exceptions to specific sections of PIP Practices. Authorized Users may provide their clients,
suppliers and contractors with copies of the Practice solely for Authorized Users purposes.
These purposes include but are not limited to the procurement process (e.g., as attachments to
requests for quotation/ purchase orders or requests for proposals/contracts) and preparation
and issue of design engineering deliverables for use on a specific project by Authorized
Users client. PIPs copyright notices must be clearly indicated and unequivocally
incorporated in documents where an Authorized User desires to provide any third party with
copies of the Practice.
PRINTING HISTORY
March 2013
Issued
Not printed with State funds
March 2013

Piping
PIP PNDMV09N
Table of Contents
1. Introduction ..................................2
1.1 Purpose ..............................................2
1.2 Scope .................................................2
2. Requirements ...............................2
Data Form
PNDMV09N-D Needle Valve Data Sheet
Page 1 of 5
PIP PNDMV09N
1.
March 2013
Introduction
1.1
Purpose
This Practice provides a data sheet and standard terms used for specifying needle valves.
1.2
Scope
This Practice describes, in table format, the standard terms used in the drop down menus
of the PIP needle valve data sheet appended to this Practice.
1.3
Additional New Standard Terms

This first issue of this Practice contains only those standard terms used in PIP Valve
Description Practices. In addition to new standard terms added by PIP as required to
support new valve descriptions, future publications of this Practice may also contain
additional valve description terms that are in general valve industry usage but not in the
PIP Valve Descriptions Practices. Additional standard terms associated with non-PIP
valve descriptions may be submitted to the PIP office at info@pip.org for consideration
for adoption into this Practice.
2.
Requirements
Table 1 provides standard terms for specifying the characteristics of a needle valve using the
PIP PNDMV09N-D Data Sheet. The terms are included in drop down menus for each cell in the
data sheet.
Table 1 Needle Valve Characteristics Standard Terms
Characteristic
Standard Terms
Valve Size Range

(Min.)
NPS 1/8
NPS 1/4
NPS 3/8
NPS 1/2
NPS 3/4
NPS 1
NPS 1-1/4
NPS 1-1/2
NPS 2
NPS 2-1/2
NPS 3
NPS 3-1/2
NPS 4
NPS 5
NPS 6
NPS 8
NPS 10
NPS 12
NPS 14
NPS 16
NPS 18
NPS 20
NPS 22
NPS 24
NPS 26
NPS 28
NPS 30
NPS 32
NPS 34
NPS 36
NPS 38
NPS 40
NPS 42
NPS 44
NPS 46
NPS 48
NPS 50
NPS 52
NPS 54
NPS 56
NPS 58
NPS 60
NPS 66
NPS 72
NPS 78
NPS 84
NPS 90
NPS 96
NPS 102
NPS 108
NPS 120
NPS 144
Valve Size Range

(Max.)
NPS 1/8
NPS 1/4
NPS 3/8
NPS 1/2
NPS 3/4
NPS 1
NPS 1-1/4
NPS 1-1/2
NPS 2
NPS 2-1/2
NPS 3
NPS 3-1/2
NPS 4
NPS 5
NPS 6
NPS 8
NPS 10
NPS 12
NPS 14
NPS 16
NPS 18
NPS 20
NPS 22
NPS 24
NPS 26
NPS 28
NPS 30
NPS 32
NPS 34
NPS 36
NPS 38
NPS 40
NPS 42
NPS 44
NPS 46
NPS 48
NPS 50
NPS 52
NPS 54
NPS 56
NPS 58
NPS 60
NPS 66
NPS 72
NPS 78
NPS 84
NPS 90
NPS 96
NPS 102
NPS 108
NPS 120
NPS 144
Page 2 of 5
PIP PNDMV09N
March 2013
Table 1 Needle Valve Characteristics Standard Terms (continued)

Valve Size
NPS 1/8
NPS 1/4
NPS 3/8
NPS 1/2
NPS 3/4
NPS 1
NPS 1-1/4
NPS 1-1/2
NPS 2
NPS 2-1/2
NPS 3
Service - Class
Cryogenic
Flammable
General or utility
Service - Fluid
Type
Air - instrument
Air - plant
Ammonia - anhydrous liquid
Butane - liquid
Carbon Dioxide - dry
Carbon Dioxide - wet
Crude oil - sour
Crude oil - sweet
Fuel gas
Fuel oil
Glycol
Hydrochloric acid
Lube oil
Nitrogen
End Connection Type
Compression
Flanged
Lugged
Threaded
Wafer
Welded
End Connection Style
Bolt holes tapped

Bolt holes untapped
BW
Ferrule tube
FF
MJ
Oversized reducing
flange
Push On
RF
RF, Molded
Roll Grooved
SW
Tubing
End Connection Ends Standard
ANSI/AWWA C110/A21.10
ANSI/AWWA C111/A21.11
API 609
ASME B1.20.1
ASME B16.1
ASME B16.1 Class 125
ASME B16.11
ASME B16.25
ASME B16.47
ASME B16.47 Series B
ASME B16.5
Mfg std
Pressure Rating Class
ASME 75
ASME 125
ASME 150
ASME 200
ASME 800
ASME 900
ASME 1500
ASME 2000
NPS 3-1/2
NPS 4
NPS 5
NPS 6
NPS 8
NPS 10
NPS 12
NPS 14
NPS 16
NPS 18
NPS 20
NPS 22
NPS 24
NPS 26
NPS 28
NPS 30
NPS 32
NPS 34
NPS 36
NPS 38
NPS 40
NPS 42
NPS 44
NPS 46
NPS 48
NPS 50
NPS 52
NPS 54
NPS 56
NPS 58
NPS 60
High pressure
High temperature
Lethal
ASME 250
ASME 300
ASME 400
ASME 600
NPS 66
NPS 72
NPS 78
NPS 84
NPS 90
NPS 96
NPS 102
NPS 108
NPS 120
NPS 144
Low temperature
Toxic
Nitric acid
LNG
Oxygen
Propane
Sewer sanitary - forced/gravity
Steam, condensate
Sulphur - liquid
Water - boiler feed
Water - fresh, cooling tower
Water - demineralized
Water - fire - AG
Water - fire - BG
Water - potable
Water - sea
ASME 2500
ASME 4500
ASME 6000
Mfg std
Page 3 of 5
PIP PNDMV09N
March 2013

Body/Bonnet
Material - Body
- Material
Alloy 400
SS
Body/Bonnet
Material - Body
- ASTM
Number
A182-F316
A351-CF8M
Body/Bonnet
Material - Body
- Manufacturing
Process
Annealed
Cast
Die formed
Body/Bonnet
Material Bonnet Material
Alloy 400
SS
Body/Bonnet
Material Bonnet - ASTM
Number
A182-F316
A351-CF8M
Trim Material General

Material
Alloy 400
Alloy 405
Trim Material General ASTM

Number
A182-F316
A351-CF8M
Type & Design Body - Type
T-body
Type & Design Needle Type
Ball Tip Stem
Type & Design Bonnet Type
Bolted
Bonnetless
Extension bonnet
Integral
Mfg std
Type & Design (Needle)

Design
Mfg std
Operation Manual
Operator
Gear
Handle
Handle - T-bar
Handwheel
316 SS
Forged
Heat treated
Precipitation
hardened
Other
316 SS
316 SS
Pressure seal
Seal welded
Threaded
Threaded-in
Threaded-over
Union
Welded
Other
Handwheel - oval
Lever
Lever - bellcrank
Lever - hi-hub with

lockout
Post indicator
Page 4 of 5
PIP PNDMV09N
March 2013

Operation Provided
Actuator
Electric - motor
Hydraulic
Stem Packing &

Stem Seals Packing
Material
Asbestos-free
Graphite
Flexible Graphite
Alloy C
Buna-N
EPDM
FKM - Kalrez
Viton, PTFE Coating
FKM
PFA
PFA - virgin
RTFE
PTFE
PTFE, Filled
TFE
316 SS
Stem Packing &

Stem Seals Packing Specs
Anti-extrusion rings
Corrosion inhibited
Lantern ring
Packing box purged
P energized seal
Stem Packing &

Stem Seals Packing Mfr
Proc
Annealed
Cast
Die formed
Forged
Heat treated
Precipitation
hardened
Other
Stem Packing &

Stem Seals Stem Seal Matl
Asbestos-free
Graphite
Flexible Graphite
Alloy C
Buna-N
EPDM
FKM - Kalrez
Viton, PTFE Coating
FKM
PFA
PFA - virgin
RTFE
PTFE
PTFE, Filled
TFE
316 SS
Stem Packing &

Stem Seals Stem Seal
Type
Bellows seal
Braided rings
Diaphragm
Laminated
Solid
V-ring - standard
V-ring - twin
V-ring - vacuum
Standards Design
Mfg std
Standards Dimensions
Mfg std
Standards Rating
Mfg std
MSS SP-105
Standards Testing
API 598
API 600
API 603
API 608
Hydraulic - pneumatic Pneumatic
MSS SP-105
Page 5 of 5
Needle Valve Data Sheet
PNDMV09N-D
Catalog Name
Valve Code Number
Owner/Role/URL
Current valve
of
Revision
Purchaser
PIP Catalog Valve Number

PIP Revision
Valve Size Range (Min/Max)

Valve Size
Recommended Manufacturer/Supplier Valve Details

Company Name
URL
Model Number
Drawing Number
Valve Size / Range

Size
Min
Max
Approved
Date
Sub-catalog
Class
Sub-catalog
Class
Sub-catalog
Class
Sub-catalog
Code
Sub-catalog
Code
Sub-catalog
Code
Remarks
Purchaser Line Classes

Sub-catalog
Class
Purchaser Alternative Valve Codes

Sub-catalog
Code
Service
Class/Fluid Type
Service Temp (Min/Max)
User service names
Detailed desc.
Pressure (Min/Max)
psi
PIP Line Class
Type
End Connection
Style
Ends Standard
Remarks
Pressure Rating
Pressure
psi g
Class
Material
ASTM Number
Body/Bonnet Material
Remarks
Trim Material
Body
Manufacturing Process
Material
ASTM Number
Material
ASTM Number
General
Needle
Seat
Seat insert
Bonnet
Remarks
Remarks
Type and Design

Type
Remarks
Body
with Panel Nut
Body
Bonnet
Needle
Trim
Design
Manual Operator
Operation
Provided Actuator
Remarks
Specifications
Remarks
Stem Packing and Stem Seals

Mfg Std
Material
Mfg Std
Material
Packing
Manufacturing Process
V-rings
Type
Low Emission
Remarks
Stem Seal
Standards
Design
Dimension (face to face)
Rating
Testing
Remarks
Additional Information
Face to Face Dimension
Centerline to Operator Top
Notes
in
ft
Valve Orientation
Dry Weight
lb
Inclination Angle
(from horizontal)
deg

PNDMV09N

Uploaded by

Copyright:

Available Formats

PNDMV09N

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PNDMV09N

Uploaded by

Copyright:

Available Formats

What is the purpose of Process Industry Practices?

What is the purpose of Process Industry Practices?

What should not be determined solely based on the information provided in PIP?

What should not be determined solely based on the information provided in PIP?

March 2013

Process Industry Practices

PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

This Practice is subject to revision at any time.

Not printed with State funds

Process Industry Practices

Process Industry Practices

Additional New Standard Terms

Valve Size Range

Valve Size Range

Process Industry Practices

Table 1 Needle Valve Characteristics Standard Terms (continued)

End Connection Type

End Connection Style

Bolt holes tapped

End Connection Ends Standard

Pressure Rating Class

Process Industry Practices

Table 1 Needle Valve Characteristics Standard Terms (continued)

Trim Material General

Trim Material General ASTM

Type & Design Body - Type

Type & Design Needle Type

Ball Tip Stem

Type & Design Bonnet Type

Type & Design (Needle)

Process Industry Practices

Lever - hi-hub with

Table 1 Needle Valve Characteristics Standard Terms (continued)

Stem Packing &

Stem Packing &

Stem Packing &

Stem Packing &

Stem Packing &

Process Industry Practices

Hydraulic - pneumatic Pneumatic

Needle Valve Data Sheet

PIP Catalog Valve Number

Valve Size Range (Min/Max)

Recommended Manufacturer/Supplier Valve Details

Valve Size / Range

Purchaser Line Classes

Purchaser Alternative Valve Codes

PIP Line Class

Type and Design

with Panel Nut

Stem Packing and Stem Seals

You might also like