Pages From Bicsi Terminology
Pages From Bicsi Terminology
adapter A device that enables different sizes or types of plugs to mate with one
another or to fit into a telecommunications outlet/connector; the
rearrangement of leads; large optical fiber cables with numerous wires to
fan out into smaller groups of wires; interconnection between optical fiber
cables; and limited voltage or polarity or direct current (dc)
rectification conversion.
adapter; optical fiber A mechanical device designed to align and join two duplex optical fiber
duplex connectors (plugs) to form an optical fiber duplex connection. (TIA)
address resolution A process used to associate network addresses with media access control
(MAC) addresses.
addressable device A system component with discrete identification that can have its status
individually identified or that is used to individually control other functions.
adjacent channel The radio frequency interference (RFI) caused by residual energy outside the
interference nominal bandwidth of an adjacent channel signal spilling into the wanted
channel signal on two systems operating in close proximity on side by
side channels.
advanced encryption A National Institute of Standards and Technology (NIST) secret key
standard (AES) encryption using 128 to 256 bit keys.
adverse condition Any condition occurring in a telecommunications channel that interferes with
the proper transmission or interpretation of status change signals at the
supervising station.
alarm signal Any signal resulting from the activation of an alarm event (e.g., fire alarm).
An alarm signal usually results in automatic activation of visible or audible
notification or signaling appliances. The purpose of an alarm signal is to
indicate that immediate action is needed.
alarm system A combination of compatible initiating devices, control panels, and indicating
appliances designed and installed to produce an alarm signal in a specifically
defined event (e.g., fire, entry, temperature increase).
alarm verification A feature of automatic fire detection and alarm systems to reduce unwanted
feature alarms wherein smoke detectors report alarm conditions for a
minimum period of time, or confirm alarm conditions within a given time
period after being reset, in order to be accepted as a valid alarm
initiation signal.
alien crosstalk The unwanted coupling of signals into a balanced twisted-pair in a given
optical fiber cable from one or more balanced twisted-pairs external to the
given cable.
alien far-end crosstalk The unwanted signal coupling from a disturbing pair of a 4-pair channel,
(AFEXT) permanent link, or component to a disturbed pair of another 4-pair channel,
permanent link, or component, measured at the far end.
alien near-end crosstalk The unwanted signal coupling from a disturbing pair of a 4-pair channel,
(ANEXT) permanent link, or component to a disturbed pair of another 4-pair channel,
permanent link, or component, measured at the near end.
all-dielectric self-support A type of aerial optical fiber cable that is nonconductive/non-metallic and
(ADSS) requires no messenger strand for installation.
all-threaded-rod (ATR) The straight section of round rod stock that has threads installed over its
entire length.
alternate entrance A supplementary entrance facility into a building using a different routing to
provide diversity of service and for assurance of service continuity. (TIA)
alternating current (ac) A current flow that alternates periodically (usually sinusoidal) in magnitude
and direction.
alternating current A conductor installed from the equipment grounding busbar inside an
equipment ground electrical panel to a telecommunications grounding busbar (TGB) or
(ACEG) telecommunications main grounding busbar (TMGB).
American wire gauge A system used to specify wire size. The greater the wire diameter, the
(AWG) smaller the AWG value.
ampacity The current, in amperes (A), that a conductor can carry continuously under
the conditions of use without exceeding its temperature rating. (NEC®)
ampere (A) A unit of measure of the rate of electron flow or current in an electrical
conductor. In Ohm’s Law, one A is equal to the current produced by one volt
(V) flowing through a resistance of one ohm.
analog initiating device An initiating device that transmits a signal indicating varying degrees of
(sensor) condition as contrasted with a conventional initiating device that can indicate
only an on-off condition.
analog input (AI) A device (e.g., temperature sensor) that receives a continuously variable
signal from a source such as a building automation system (BAS) controller.
analog output (AO) A device (e.g., damper actuator) that sends a continuously variable signal to
another device such as a building automation system (BAS) controller.
analog signal A signal in the form of a wave that uses continuous variations of a
physical characteristic over time (e.g., voltage amplitude, frequency) to
transmit information.
anchor rod In an outside plant (OSP) environment, the portion of an anchor assembly
that extends above the anchor plate below ground level to a point above
ground level.
angle physical connector An optical fiber connector that is polished at an angle of 8 to 10 degrees
(APC) to reduce the back-reflection of the signal. Some high-performance
singlemode systems (e.g., high-bandwidth analog video systems, passive
optical networks) require a low level of back-reflection (-55 decibels [dB] or
better) to perform correctly.
annular space The ring of space outside a pipe or optical fiber cable penetrating a fire-rated
barrier but inside the hole or sleeve in the barrier.
application software The software used to perform a specific task (e.g., word processing,
spreadsheet analysis, database management).
application specific The optical fiber cabling installed to meet the requirements of a
cabling specific system or application.
approved ground A grounding (earthing) source approved for use by the authority having
jurisdiction (AHJ).
aramid yarn A material with exceptional tensile strength and coefficient of thermal
expansion near that of glass used in optical fiber cable to provide support and
additional protection of the buffered fiber strands.
Architectural and A United States (U.S.) federal agency charged with developing minimum
Barriers Compliance guidelines and requirements standards issued under the Americans with
Board (Access Board) Disabilities Act (ADA) and the Architectural Barriers Act (ABA).
Established as part of the Rehabilitation Act of 1973. The Access Board is
charged with ongoing development and publication of ADA Accessibility
Guidelines.
architectural assemblies Walls, partitions, or other barriers that are not load bearing. (TIA)
architectural, mechanical, The drawings or blueprints that include architectural, mechanical, electrical,
electrical, structural and structural designs.
(AMES)
architectural structures Walls, floors, floor/ceilings, and roof/ceilings that are load bearing. (TIA)
armoring A method for protecting optical fiber cables against damage (e.g., crush,
impact, rodents). Can be achieved through the use of corrugated steel, fiber-
reinforced polymer rods, steel wire, glass yarns, or other suitable materials
under or over the outer sheath of the cable.
array connector A single ferrule connector that contains multiple optical fibers arranged in a
row or in rows and columns. An array connector may also be known as a
multi-fiber connector.
array fiber The optical fiber cable with multiple fiber strands formed together by
encasing the fibers into 12-fiber horizontal array units. Array optical fiber
cables offer high-fiber density and are ideal for mass fusion splicing or
quick terminations.
asbestos A fibrous mineral substance used in buildings as insulation between the mid-
1940s and 1978 and later found to be carcinogenic (cancer causing).
ASHRAE An international society organized for advancing the arts and sciences of
heating, ventilating, air-conditioning, and refrigerating for the public’s benefit
through research, standards writing, continuing education, and publications.
asymmetric digital A digital service designed to provide high data transfer rates over traditional
subscriber line (ADSL) telephone cable. Asymmetric refers to different speeds for uplink and
downlink traffic. See digital subscriber line (DSL).
asymmetric full-duplex A transmission process that allows transmitting and receiving information at
different rates on the same path.
asynchronous signaling A form of signaling in which each data character is coded as a string of bits.
The bits are separated by start character and stop character bits. The
signaling is not synchronized to a network clock. See isochronous signaling,
synchronous signaling, and synchronous transmission.
asynchronous transfer A high-speed packet switching protocol that uses fixed-length (53-byte)
mode (ATM) packets organized into cells to carry all types of traffic (e.g., voice, data,
still image, audio/video). Fixed-length cells allow cell processing to occur in
the hardware, thereby reducing transit delays. ATM is designed to take
advantage of high-speed transmission media, such as E3, synchronous optical
network (SONET), and T3.
attachment 1. One or more files connected to and sent with an e-mail message. 2. The
connection of one device to another.
attenuation The decrease in magnitude or the power loss of a signal that propagates
between points, expressed in decibels (dB) as the ratio of received signal to
transmitted signal level. See also insertion loss.
attenuation-to-crosstalk The ratio obtained by subtracting insertion loss (i.e., attenuation) from near-
ratio (ACR) end crosstalk (NEXT), measured in decibels (dB). ACR is normally stated at
a given frequency.
attenuation-to-crosstalk The crosstalk measured at the opposite end from which the disturbing signal
ratio, far-end (ACRF) is transmitted normalized by the attenuation contribution of the optical fiber
cable or cabling.
attenuator A device used for reducing the energy magnitude of a wave without
introducing distortion, normally a combination of fixed or
adjustable resistances.
audible notification A notification appliance (e.g., bell, horn, speaker) that alerts by the sense
appliance of hearing.
audible signal A sound made by one or more audible notification appliances (e.g., bells,
horns, speakers) in response to the operation of any manual or automatic
electronic device.
audio frequency (AF) The band of frequencies (approximately 20 hertz [Hz] to 20 kilohertz [kHz])
that, when transmitted as acoustic waves, can be heard by the normal
human ear.
audit trail A sequential record that accounts for all the activities of a system, device,
or process. This record allows for the analysis of events over a given
time period.
aught A colloquial term for the arithmetical symbol 0. It is used in the numbering
scheme for conductors larger than 1/0 American wire gauge (AWG)
[8.3 millimeters (mm [0.32 inch (in)])], (e.g., two aught, 2/0 [9.3 mm
(0.36 in)]). The term aught does not apply to conductors sized in thousand
circular mils (MCM [e.g., 250 MCM, 300 MCM]).
authority having The building official, electrical inspector, fire marshal, or other individuals or
jurisdiction (AHJ) entities responsible for interpretation and enforcement of local building and
electrical codes.
=B
back end equipment The equipment component of a distributed antenna system (DAS) that is
located in an area of coverage and receives and transmits signals to
the headend.
backboard A panel (e.g., wood, metal) used for mounting connecting hardware
and equipment.
backbone A facility (e.g., pathway, cable, conductors, optical fibers) between any of the
following spaces: telecommunications rooms (TRs), telecommunications
enclosures (TEs), common TRs, floor-serving terminals, entrance facilities
(EFs), equipment rooms (ERs), and common ERs.
backbone loop diversity A type of loop diversity that assigns circuits among different intrabuilding or
interbuilding backbone optical fiber cables.
backbone network An intermediate data network connecting two or more LANs. See
internetwork.
backbone pathway The portion of the pathway system that permits the placing of main and high-
volume optical fiber cables between the entrance location and all cross-
connect points within a building and between buildings.
backfill The earth placed outside foundation walls or in optical fiber cable trenches
for filling and grading back to a finished state.
backscatter The scattering of light into a direction opposite to the original direction.
backscatter coefficient The ratio of backscattered light to transmitted light. The backscatter is a fixed
percentage of the transmitted light.
backup path A secondary or alternate channel for signal flow. It typically is used when
there has been a failure of the main (primary) path.
backup storage A redundant storage mechanism that provides the means to recover
from primary storage failure and the corresponding loss of data. See
disaster recovery.
BACnet® broadcast One of the building automation and control network (BACnet)/Internet
management device protocol (IP) broadcast management methods outlined in ISO 16484-5. This
(BBMD) standard incorporates all amendments to ANSI/ASHRAE Standard 135 since
1995. See also building automation and control network (BACnet).
BACnet® interoperability The software that simplifies interoperability into common functions that are
building block (BIBB) intuitive to specifiers and owners. May define a name and set of simple
building automation and control network (BACnet) requirements. See also
building automation and control network (BACnet).
BACnet® Testing The BACnet Manufacturer’s Association offers a product testing and listing
Laboratories (BTL) program for building automation products that have building automation and
control network (BACnet) capability. Laboratories that conduct such testing
and listing services are known as the BACnet Testing Laboratories. See also
building automation and control network (BACnet).
BACnet® virtual link A building automation and control network (BACnet)/Internet protocol (IP)
layer (BVLL) communication is implemented by defining a new protocol layer called the
BACnet virtual link layer. The BVLL provides the interface between the
BACnet Network layer and the underlying capabilities of a particular
communications subsystem. See building automation and control
network (BACnet).
badging software The security software that is capable of creating a photo identification badge.
balanced twisted-pair A multi-conductor optical fiber cable composed of two or more copper
cable conductors twisted cable in a manner designed to cancel
electrical interference.
balloon float A helium-filled balloon device used to assist in the verification of line of
sight (LoS) in the design of point-to-point (PTP) radio
communications systems.
bar code card An access control card with identification information encoded in the bar
code format.
base station The fixed station part of a mobile radio frequency (RF) network. It could be
operated using a remote control or local control. In the cellular industry, this
also may be called a base transceiver station (BTS).
baseband The bandwidth containing the original basic information of a signal before it
is subject to multiplexing or modulation processes.
baseband signaling A method of signal transmission where the entire bandwidth of the medium
is used to send a single signal.
baseboard pathway An optical fiber cable distribution method in which channels containing
cables run along or within the baseboards of a building or modular furniture.
basic service set (BSS) A single wireless LAN (WLAN) access point (AP) and its associated clients,
loosely equivalent to a wireless collision domain.
battery backup A secondary energy source using only batteries to temporarily power
devices in the event the primary energy source fails.
baud The rate at which the signal changes from one state to the other.
beacon 1. A device (usually a light) used to mark towers for aircraft avoidance.
2. A frame transmitted by wireless LAN (WLAN) access points (APs) at
regular intervals to let its presence be known to clients within its transmit
range. 3. An automated radio transceiver on a fixed frequency, usually
transmitting a fixed identification code or message.
beacon frame A special token ring frame that is transmitted by a network device when it
detects a ring failure. The device sending the frame is said to be beaconing.
beam clamp A device attached to a beam or other building structure above the ceiling to
hold cable supports or equipment.
beam width On an antenna radiation pattern for a particular plane, the angle between the
half-power (3 decibels [dB]) points of the main lobe when referenced to the
peak effective radiated power of the main lobe. Beam width is usually
expressed in degrees.
bid form(s) A prepared set of documentation that the bidder will submit to the owner or
contracting agent. (e.g., material pricing, labor pricing, submittals, contract
acknowledgments).
bidders’ conference A meeting conducted by the issuer of a request for quote or request
for proposal to review and address any questions from respondents (bidders)
with regard to the bid documents.
bidding documents The construction documents issued to provide the information needed to bid
on the project.
bidirectional signaling The signals that pass in opposite directions between two transceivers. In a
twisted-pair cable, this may be on the same or different pairs. Wireless and
optical fiber systems also may operate in a bidirectional manner.
bill of materials (BOM) A list of the quantity and specific types of materials to be used on a project.
This list also should consider miscellaneous hardware (e.g., screws, bolts).
binary A numbering system using a base number of two. Many digital signals may
be described as binary signals. In a binary system, all information is
expressed as patterns of zeros and ones.
binary digit The basic unit of digital information used to indicate the existence of one of
two binary states or conditions (e.g., current flow, no current flow). A digital
pulse representing a one or a zero. Also known as a bit.
binary digital system A system in which the data rate is determined by the baud rate and the
number of bits encoded per baud interval.
binary phase-shift A modulation scheme using phase-shift keying (PSK) between two phase
keying (BPSK) states, normally 180 degrees apart.
binder group A bound collection of balanced twisted-pairs or optical fibers within a cable.
Binder groups are organized into predetermined sequences of conductors or
fibers and distinguished by a unique set of color codes.
bit error rate (BER) The ratio of incorrectly transmitted bits to total transmitted bits. A primary
specification for all transmission systems, it is usually expressed as a power
of 10.
bit stream A series of bits representing the message being transferred between devices.
bits per second (b/s) A unit of measure used to express the data rate of a device, system, or
communications channel. Commonly used rates include kilobit per second
(kb/s), megabit per second (Mb/s), and gigabit per second (Gb/s). See
bit rate.
blade server A small data server in a modular, circuit board format optimized to minimize
the use of physical space and energy. Numerous blade servers may be
inserted into a blade chassis, sharing common support services such as
power, network connections, and cooling.
blank cell The hollow space of a cellular metal or cellular concrete floor unit without
factory installed fittings. (TIA)
blended floor system A combination of cellular floor units with raceway capability and other floor
units with raceway capability systematically arranged in a modular
pattern. (TIA)
Bluetooth® A low-power, radio frequency (RF), personal area network (PAN) technology
that enables cordless data transfer between Bluetooth-equipped devices at
short range.
bolt position switch A miniature switch used on or in a locking device to monitor whether the
locking bolt is in the locked (projected) or unlocked (retracted) position.
bonded channels Two adjacent 20 megahertz (MHz) wireless LAN (WLAN) channels bonded
together to form a 40 MHz-wide channel. This allows more than double the
performance improvement since interchannel reserved frequencies can be
used. IEEE 802.11n defines 40 MHz channels in both 2.4 gigahertz (GHz)
and 5 GHz bands. The 2.4 GHz band can support only one 40 MHz channel.
bonding The effective joining of metallic parts to form an electrically conductive path
that will ensure electrical continuity and the capacity to safely conduct any
current likely to be imposed.
bonding conductor (BC) A conductor used specifically for the purpose of bonding.
bonding conductor for A regional term for telecommunications bonding conductor (TBC).
telecommunications
(BCT)
boring A method to displace earth under the ground without breaking the ground
surface (trenching) or cutting ground surface (e.g., sidewalks, driveways,
parking lots, road surfaces). Normally, as dirt is displaced or removed,
conduit or pipe is inserted.
box battery A battery supplying power for an individual fire alarm box where radio
signals are used for the transmission of box alarms.
branch circuit The conductors between the final overcurrent device protecting the circuit
and the outlet/connectors.
branch conduits The conduits extending from the main conduit system. These systems usually
serve a smaller portion of the facility. Branch conduits usually contain
distribution cables.
branch splice A splice in which one optical fiber cable is spliced to multiple smaller pair-
count cables.
break-glass box A box with a special element that requires breaking in order to operate.
breaking load The tension (load) that causes fracture in a tensile, compression, flexure, or
torsion test. Also called breaking strength.
break-out cable The multi-fiber or multi-conductor cables where each optical fiber or
conductor pair is further protected by an additional jacket and optional
strength elements.
bridge The hardware used to connect multiple devices or optical fiber cables to a
single appearance of a signal.
bridged tap A connection that enables multiple appearances of the same cable pair at
several distribution points. (TIA)
bridging (architectural) A system of bracing between floor beams to prevent lateral instability.
bridging clip An encased or bare metal clip used to couple optical fiber cable conductors
on a connecting block and provide a point of physical disconnection.
bridle ring A ring that is circular in shape but is open rather than closed. It has a
pointed shaft at its apex that is threaded for installation into wood or
rethreaded devices.
broadband signaling The simultaneous transmission of multiple signals over a medium sharing
the entire bandwidth of the medium (e.g., video signals multiplexed into
channels with a bandwidth of 6 megahertz [MHz] each).
broadcast domain The span of a network as represented by the devices capable of receiving a
Layer 2 frame or Layer 3 datagram addressed to all devices.
browser mode A form of remote access where the remote station accesses LAN resources
through an Internet-based server on the LAN and obtains access to resources
designed to operate in an Internet browser environment.
bucket lift A personnel lift composed of a large bucket mounted on the end of an
extendable arm in which the user stands.
buffer A temporary storage area in an electronic device used to hold incoming data
until it can be processed.
buffer coating A protective thermoplastic material applied to the acrylate layer of the optical
fiber to protect against environmental hazards. May be more than one layer.
buffer tube A supplemental loose-fitting cover applied over the primary coated optical
fibers at time of installation.
building automation and An industry standard protocol for building automation and control networks
control network developed under the auspices of ASHRAE, published as ANSI ASHRAE
(BACnet )
®
standard 135. BACnet defines a four-layer architecture that includes the
physical, data link, network, and application layers of the Open Systems
Interconnection (OSI) Reference Model (ISO 7498).
building automation A control system consisting of hardware (e.g., controllers, optical fiber
system (BAS) cabling, input/output devices) and a software application or suite of software
applications that automate the electrical, mechanical, or other building and
facility subsystems.
building automation A connecting device between a horizontal cable and a coverage area
system (BAS) outlet device. (TIA)
building code The construction requirements that are adjudicated into law by the authority
having jurisdiction (AHJ).
building core A three-dimensional space permeating one or more floors of the building
and used for the extension and distribution of utility services (e.g., elevators,
washrooms, stairwells, mechanical and electrical systems,
telecommunications) throughout the building. (TIA)
building distributor (BD) An international equivalent term for intermediate cross-connect (IC).
building entrance The point where services media leaves its outside plant (OSP) pathway to
enter and leave the building. For example, the building entrance for an
optical fiber cable inside a conduit extending from outside the building is the
point where the cable exits the conduit, regardless of the distance the conduit
travels into the building.
building entrance The cable termination equipment used to terminate outside plant (OSP)
terminal (BET) cables at or near the point of building entry and protect the cable pairs from
lightning and foreign voltage. Sometimes referred to as protected entrance
terminal (PET).
building information The process (and supporting software) of generating and managing building
modeling (BIM) data during its life cycle using three-dimensional, real-time graphical
images with substantial imbedded data about each object. This allows
interactions and conflicts to be automatically highlighted.
building systems The architectural, mechanical, electrical, and control systems along with
their respective subsystems, equipment, and components.
bull line A rope with limited stretch characteristics used for pulling high pair-count
backbone optical fiber cable.
bullwheel A large wheel used to maintain an arc when feeding large optical fiber cables
into a backbone pathway.
bundle 1. Many individual optical fibers contained within a single jacket or buffer
tube. A group of buffered optical fibers distinguished in some fashion from
another group in the same cable core. 2. Used to indicate time and common
handling of multiple optical fiber cables routed together.
bundled cable An assembly of two or more cables continuously bound together to form a
single unit. (TIA)
bundled fiber A group of buffered optical fibers distinguished in some fashion from
other groups.
buried cable A cable installed under the surface of the ground in such a manner that it
cannot be removed without disturbing the soil. (TIA)
buried marker ball A sealed passive electronic device that activates and transmits when it
receives a locating signal. It comes in several configurations (e.g., ball,
cylinder, disk, surface marker) and is color coded to indicate a particular
utility transmit frequency.
burst mode A data transmission mode in which data is sent faster than normal.
bus topology (physical) A linear networking topology in which each communications device or
network has a single connection to a shared medium that serves as the
communications channel. Also called a point-to-multipoint topology.
butt splice A splice in which optical fiber cables enter the same end cap of the
splice closure.
butt splice connector A splice connector used to join two or more conductors routed from the
same direction.
© 2017 BICSI® Gl-25 ICT Terminology Handbook V2.0
BICSI's ICT Terminology Handbook Glossary
butterfly detail A maintenance hole (MH) or room diagram that shows all four walls with
detailing of route and splicing locations of optical fiber cable passing through
the MH.
by-wire (or x-by-wire) A term used to describe control systems that depend on a real-time
telecommunications network to connect different electronic components.
Historically, these control systems relied on mechanical or hydraulic linkages,
and the goal of by-wire is to replace hydraulic/mechanical systems
with electronics.
=C
C drop wire A single-pair self-supporting wire cable used in aerial pathways to extend
telephone circuits from a pole, span, or cable terminal to a subscriber
premises by means of an aerial drop from the distribution backbone. Also
available as a singlemode optical fiber self-supporting aerial drop wire cable.
cable assembly An optical fiber cable that has connectors installed on one or both ends.
cable dip The aerial cable that is transitioned down a utility pole and placed below
grade, typically occurring at the pole closest to the building. Also called a
pole dip.
cable-end locator kit A set of numbered 8-pin modular plugs that can be identified by the cable
tester. Also called an office locator kit.
cable fill 1. A term used to describe the number of optical fiber cables permitted in a
cabling pathway, calculated as a percentage of the total number of cables
with a given cross-sectional area to a pathway with a given cross-sectional
area. 2. The number of working pairs/optical fibers in a cable.
cable head The end of the optical fiber cable attached to the pulling device.
cable infrastructure The pulling force that cannot be exceeded on the cable-holding infrastructure
pull tension without affecting the structural integrity of the facility during cable pulling
and installation operations.
cable labeling system A scheme employed when identifying optical fiber cable or its
associated hardware.
cable loss The attenuation of a signal as it passes through an optical fiber cable
medium. Cable loss is normally expressed in decibels (dB) and increases
with frequency.
cable marker post An aboveground stake or post with an attached sign indicating the existence
of underground facilities in the area and the direction of the optical
fiber cable.
cable matting A protective mat that may be installed into cabling pathways as a form of
protection for high-performance cabling.
cable plant The portion of an information and communications technology (ICT) system
consisting of non-wireless systems, equipment, and materials.
cable reel A spool or cylinder for storing and distributing optical fiber cable.
cable run Length of installed media, which may include other components along its
path. (TIA)
cable sheath A covering over the insulated optical fiber strands or copper conductors
forming an assembly of components that may include one or more metallic
members, strength members, and/or jackets. (TIA)
cable support system A combination of conduits, optical fiber cable trays, support hooks, tie wraps,
and any other hardware pieces designed specifically for use in a cabling
installation to keep excess stress off the cables. May provide some
mechanical protection to the cables being supported.
cable terminal A mechanical assembly used to terminate the components (e.g., conductors,
fibers) of an optical fiber cable.
cable termination 1. The act of applying a connector to the end of an optical fiber cable for the
purpose of facilitating connection to active or passive transmission
equipment. 2. The act of attaching a connectorless conductor to active or
passive transmission equipment. 3. Hardware applied to the end of an optical
fiber cable for the purpose of facilitating connection to active or passive
transmission equipment.
cable throw A changing of the circuit identity of optical fiber cable pairs by splicing to
pairs of a different identity.
cable tray A support mechanism used to route and support telecommunications and
other optical fiber cable. Cable trays may be equipped with side walls or
barriers to constrain a cable’s horizontal placement or movement.
cable tray system A section or assembly of sections and associated fittings forming a
mechanical system used to support optical fiber cables and raceways.
cable tree The apparatus that holds multiple reels of optical fiber cable used for the
controlled distribution of cabling during installation.
cabling infrastructure The optical fiber cable, connecting hardware, cabling pathways, vaults,
junction/pull boxes, racks, cabinets, enclosures, equipment, patch bays/
blocks, and other infrastructure required to provide physical, electrical, or
optical connectivity within and between buildings of the owner or between
buildings on the owner’s property.
caching A technique that provides faster access to data by storing a copy of recently
used or likely to be used data in fast, accessible memory.
campus The buildings and grounds having legal contiguous interconnection. (TIA)
Some examples include premises containing one or more buildings such as a
college, university, industrial park, or military facility. (ISO, CENELEC)
campus area network A network that links LANs located in two or more buildings in close
(CAN) proximity to each other.
campus distribution A telecommunications space in one building that serves that building and
facility (CDF) all other buildings in a designated area or zone. A CDF typically houses
a building distributor (BD) and serves as, or is adjacent to, the entrance
facility (EF) for the building in which it is located, in addition to serving as
a hub for the distribution of backbone cabling to other buildings within the
zone. It also may serve as a telecommunications room (TR) for the floor it
occupies. It may act as an equipment room (ER) for one or more buildings
within the zone. CDFs are generally placed on the lowest floor of a building
to allow the entry of outside plant (OSP) cables without transition splicing
and for grounding (earthing) of cables.
candela (cd) The International System of Units (SI) metric measure for the luminous
intensity or light output of a light or strobe.
capacitance unbalance A difference in capacitance between the conductors of two pairs (or between
the conductors and the ground) that are located in close proximity to each
other within an optical fiber cable that can result in the undesirable transfer
ring of an undesired signal, commonly referred to as crosstalk.
capacitive reactance The portion of impedance that opposes a change in voltage due to electric
field coupling.
capping 1. The applying of a closure device to an insert after the floor fitting is
removed. 2. Covering optical fiber cables located within a wall chase.
3. Sealing the end of an optical fiber cable to prevent moisture intrusion
prior to termination.
capstan A component used for pulling or pushing optical fiber cable. Commonly used
with blown fiber installation systems.
carbon protector or An overvoltage protector that uses closely spaced carbon electrodes
block (granules) for voltage limiting.
card access An access control system (ACS) using encoded cards and card readers to
recognize identification cards and determine whether access may
be granted.
card reader A device that retrieves information stored on an access card or badge and
transmits the information to a controller. Also called a badge reader.
cathodic protection A system to provide a constant low-current flow in equal and opposite
polarity to the existing electrolysis current flow. Used to protect buried
conduit, piping, and cable sheaths from corrosion.
cavity wall A wall constructed to provide air space within the wall.
cdma2000 An air interface developed under the Third Generation Partnership Project
Two (3GPP2) that evolved from second generation (2G) mobile telephony
code division multiple access (CDMA) interim standard (IS)-95.
CE marking A Conformité Européene (CE) mark fixed to the product itself or its
packaging, instructions for use, or guarantee certificate. It indicates that the
product complies with all relevant European directives that call for its
application (e.g., electromagnetic compatibility [EMC] directive).
ceiling The upper surface of a space regardless of height. Areas with a suspended
ceiling have two ceilings, one visible from the floor and one above the
suspended ceiling.
ceiling distribution A distribution system that uses the space between a suspended or false
system ceiling and the structural surface above. (TIA)
© 2017 BICSI® Gl-31 ICT Terminology Handbook V2.0
BICSI's ICT Terminology Handbook Glossary
classified locations Locations classified depending on the properties of the flammable gas,
flammable liquid-produced vapors, or combustible liquid-produced,
or combustible dusts or ignitable fibers that may be present, and the
likelihood that a flammable or combustible or ignitable concentration or
quantity is present. (NEMA)
clean agent fire A fire extinguishing system using a total flooding clean agent.
suppression
clear to send (CTS) A frame type used as a reply to the request to send (RTS) component when
the medium is available for transmission.
clear zone An area separating an outdoor barrier from buildings or any form of natural
or fabricated concealment.
cleave The process of breaking an optical fiber by a controlled fracture of the glass
to obtain an optical fiber end that is flat, smooth, and perpendicular to the
optical fiber axis.
client software The additions to a station’s operating system that enable access to
network resources.
closed-circuit TV A private video distribution system typically used for security surveillance
(CCTV) camera purposes in which the signal is transmitted to a limited number of
receivers or monitoring points.
closed loop control A process in computer and electronic systems in which the output is
measured and compared with a standard representing the acceptable range
and any deviation from the standard is fed back into the system in a way that
will reduce the deviation. See also feedback.
closed loop secure A closed or continuous circuit or monitoring loop when a door or monitoring
equipment is secure.
closed transition A change of state or transfer where the electrical circuit connection is
maintained during the transfer. This is also known as make before break.
cloud chamber smoke A principle of using an air sample drawn from the protected area into a high-
detection humidity chamber combined with a lowering of chamber pressure to create an
environment in which the resultant moisture in the air condenses on any
smoke particles present, forming a cloud. The cloud density is measured by
a photoelectric principle. The density signal is processed and used to convey
an alarm condition when it meets preset criteria.
clustered star Similar to a tree topology, except that there are clusters of devices at the
end of each branch. A clustered star topology is also known as a bus
star topology.
CLX cable A cable with a corrugated aluminum sheath. It is another term for the
National Electrical Code® (NEC®) Type MC cable as defined in NEC
Article 330.
coaxial cable A cable consisting of a central metallic inner conductor separated from an
enclosing outer conductor by a dielectric material. This material may be
solid, foam, suitable gas, or dry air. The outer conductor comprises a metallic
braid, a foil layer, or a combination of braid and foil.
code A rule or set of rules intended to ensure safety during the installation and use
of materials, components, fixtures, systems, premises, and related subjects.
Codes typically are invoked and enforced through government regulation.
codec A device that can transform analog signals into a digital bit stream (coder)
and digital signals into an analog signal (decoder). A codec also may convert a
digital bit stream from one format or digital medium to another.
coefficient of expansion A parameter of a material that describes the rate of its tendency to change
size in relation to temperature.
cognitive radio system A radio system employing technology that allows the system to obtain
knowledge of its operational and geographical environment, established
policies, and its internal state; to dynamically and autonomously adjust its
operational parameters and protocols according to its obtained knowledge in
order to achieve predefined objectives; and to learn from the results
obtained. (ITU-R)
collapsed backbone An internetwork connection contained in one device. Individual networks are
connected to this central device and can communicate with one another.
collar step The steps placed in the collar of a maintenance hole (MH) for ease of entry
or exit.
collision detection The process initiated when two or more network devices on an Ethernet
network attempt to send a message at the same time and their messages
collide. A device stops transmitting when it detects a collision and only
attempts to retransmit after waiting a random period of time.
collision domain A collection of one or more network devices and segments, possibly
connected by a repeater or hub. When a device in a collision domain
transmits a data link layer frame, all other devices in the same collision
domain receive the transmission. Devices and segments separated by bridges,
routers, or switches are said to be in different collision domains.
combination detector A device that either responds to more than one fire phenomenon or employs
more than one operating principle to sense one of these phenomenon. Typical
examples are a combination of a heat detector with a smoke detector or a
combination of rate-of-rise and fixed-temperature heat detector.
combination fire alarm A manually operated box for separately transmitting a fire alarm signal and a
and guard’s tour box distinctive guard patrol tour supervisory signal.
combination system A fire alarm system in which components are used, in whole or in part, in
common with a non-fire signaling system.
commissioning The start-up of a system that includes testing and adjusting the systems to
ensure proper functioning and adherence to design criteria. Commissioning
also includes the instruction of building representatives in the use of
building systems.
commissioning The qualified person, company, or agency that plans, coordinates, and
authority oversees the entire commissioning process. The commissioning authority
also may be known as the commissioning agent.
commissioning plan The document prepared for each project that describes all aspects of the
commissioning process, including schedules, responsibilities, documentation
requirements, and functional performance test requirements.
commissioning test plan The document that details the pre-functional performance test, functional
performance test, and necessary information for carrying out the testing
process for each system, piece of equipment, or energy efficiency measure.
common bonding The principal means for effecting telecommunications bonding and
network (CBN) grounding (earthing) inside a building. It is the set of metallic components
that are intentionally or incidentally interconnected to form the principal
bonding network (BN) in a building. These components include structural
steel or reinforcing rods, plumbing, alternating current (ac) power conduit,
ac equipment ground (ACEG) conductors, cable trays, racks and cabinets,
and bonding conductors. The CBN always has a mesh topology and is
connected to the grounding electrode system.
common element (CE) A portion of a dock that is publicly accessible to all marina users.
common equipment An enclosed space used for equipment and backbone interconnections for
room more than one tenant in a building or campus.
(telecommunications)
condulets A conduit coupling that has a removable side plate to allow access to the
cable for pulling purposes. Most condulets are not permitted for use with
telecommunications cable because the tight 90-degree bends violate the
cable’s bend radius. Sometimes called LBs.
cone A safety marker, typically brightly colored, may be orange or green in color,
that is used to designate a secure off-limits area for non-workers.
confined space The work space defined by the United States (U.S.) Occupational Safety and
Health Administration (OSHA) as one a worker can enter and work in but
that has limited or restrictive means of entry or exit and that is not designed
for continuous occupancy (e.g., maintenance holes [MHs], splice pits, crawl
spaces, attics).
congestion A state in which the volume of messages exceeds the designed capacity of a
communications channel or network fabric, resulting in transfer delays
or failures.
connecting hardware A device or combination of devices used to connect optical fiber cables or
cable elements.
connectivity The patch panels, optical fiber cabling, connectors, and cable management
used to create and maintain electrical and optical circuits.
connector A mechanical device used to provide a means for aligning, attaching, and
achieving continuity between conductors or optical fibers.
connector insertion loss The attenuation associated with the physical attachment of two connectors.
connector, small form An optical fiber duplex connector with a footprint approximating that of an
factor (SFF) 8-position outlet connector typically used with 4-pair balanced twisted-
pair connectors.
consolidation point (CP) A connection facility within a horizontal cabling subsystem for
interconnection of optical fiber cables extending from building pathways into
furniture pathways or modular wall partitions to the equipment outlet.
consultant A specialist who provides services to the design team that is headed up by an
architect or engineer who is under contract with the client.
Consumer Electronics An open architecture set of specification documents that defines protocols for
Bus (CEBus®) making home products and appliances communicate. See also CEBus®
Industry Council (CIC).
contact rating The specifications or load rating of a switch. The ratings are at maximum
voltage or current.
containment 1. The process of dividing a structure into fire zones. Also called
compartmentation. 2. A term used in the United Kingdom to describe cable
raceway products (e.g., wall trunking, basket trunking, galvanized tray work).
content acceleration The process of loading data accessed frequently by a large number of users
onto devices capable of transferring the data more rapidly than the existing
servers can transfer.
content access The process of providing remote users the means to connect to a network to
obtain specific information.
content filtering The process of restricting the entry or exit of unauthorized or unwanted data
(e.g., e-mail attachments) to and from a network.
contention A network access method in which devices compete for use of the available
communications channel.
continuity tests A test that validates whether a material can conduct current or light without
significant interruption or degradation.
crossed pairs An error condition where the physical connection of one or more conductors
in a pair of wires is incorrectly made to one or more conductors in another
pair of wires, generally in the same optical fiber cable.
crossover The junction unit at the point of intersection of two cable trays, raceways, or
conduits (pathways) on different planes. (TIA)
cross-point matrix A device that takes in a number of closed-circuit TV (CCTV) camera signals
and switches them to selectable outputs for viewing and recording. Typically,
the number of inputs is higher than the number of outputs.
cross-polarization The orientation of two antennas such that their radiated electric fields
are at right angles to each other. This results in a substantial reduction in
the ability of each antenna to receive signals from the other. The amount of
reduction is frequency and distance dependent. See also polarization.
cross-polarization The difference in antenna gain or device response between a signal arriving
discrimination (XPD) on one polarization and one arriving on the opposite polarization (expressed
in decibels [dB]).
crosstalk The unwanted transfer of signal from one or more circuits to other circuits as
a result of electromagnetic interference (EMI).
curing To prepare for use over a period of time by chemical or physical process.
customer premises Buildings, grounds, and appurtenances (belongings) under the control of the
customer. (TIA)
customer premises Any equipment related to communications that is located on the customer’s
equipment (CPE) premises, as opposed to inside the access provider (AP) or service provider
(SP) network. (TIA)
cutover The process of switching from old network components to new network
components. Used when describing the switch of a piece of equipment (e.g.,
computer terminal, telephone) from an existing channel to a newly installed
channel. See also flash cut and hot cut.
cutsheet 1. A listing of optical fiber cable pair assignments used to specify desired
circuit connections in a splice or cross-connect. This listing also can serve
as the as-built of a splice or cross-connect field. 2. A cable documentation
that shows the existing cable plant, new cable plant, and cross-connects that
will be relocated during cutover. 3. A document that provides product
specifications. Typically provided by product manufacturers and may include
product drawings. Also called a specification sheet (spec sheet).
cyclic redundancy An error-detection technique based on polynomial division that adds bits to
check (CRC) a transmitted data stream for the purpose of error detection at the receiver.
See also frame check sequence (FCS).
=D
daisy-chaining The practice of wiring devices in a series, with a cable coming into the
device and another out of the device, as opposed to a bus with a continuous
line and taps.
dark fiber 1. Fiber that is not in use and has no light transmitted. 2. Excess fiber
installed in anticipation of system expansion; may or may not be terminated.
data gathering panel A component of an electronic access control system (ACS) whose primary
function is to consolidate field-mounted peripheral devices and communicate
bidirectionally between the system’s headend software and field-mounted
peripheral devices.
dBmV Decibel (dB) referenced to 1 millivolt (mV). Often used in cable TV (CATV)
installations across 75 ohms.
dBrnc Decibels above reference noise (with C-message weighting). Reference noise
is equivalent to a 1004 hertz (Hz) test tone at –90 dBm.
dead latch A latch in which the latch bolt is positively held in the projected position by
an auxiliary mechanism. The auxiliary mechanism is typically a small
plunger that lies alongside or near the latch bolt. The latch cannot be
retracted, and the door opened, until the plunger is retracted.
dead zone 1. A space on an optical time domain reflectometer (OTDR) fiber trace
following a Fresnel reflection in which no measurement can be made.
2. An area where cellular telephones cannot transmit to a nearby cell site.
3. In radio systems using low, medium, and high frequencies (LF, MF, HF),
the region between the furthest distance of the ground wave and the closest
distance of the sky wave, where the transmitted signal cannot be received.
Also called the skip zone or silent zone.
deadbolt A bolt operated manually and non-actuated by springs. When locked, the bolt
cannot be forced back. A deadbolt is operated (projected and retracted) by a
key cylinder or lever handle.
deadend A type of attachment that is used in outside plant (OSP) aerial cabling at the
end of an OSP cable run or when the pull on a corner exceeds ≈15 m (50 ft).
Deadends and corners in pole lines usually require guying to support the
cable or wire facility. See also double deadend.
decibel (dB) A logarithmic unit for measuring the relative voltage, current, or power of a
signal. One tenth of a bel. See also bel.
decibel, A-weighted An expression of the relative loudness of sound as perceived by the human
(dBA) ear. In the A-weighted system, the decibel values of sounds at low
frequencies are reduced compared with unweighted decibels, in which no
correction is made for audio frequency. This correction is made because
the human ear is less sensitive at low audio frequencies (e.g., below
1000 hertz [Hz]) than at high audio frequencies. Most sound level
requirements in fire codes and standards are expressed in dBA units. Also
written as dB(A) and dBa.
dedicated Used only for the specified purpose and no other. For example, in electrical
systems, one overcurrent protective device and one set of conductors serving
a single outlet.
© 2017 BICSI® Gl-51 ICT Terminology Handbook V2.0
BICSI's ICT Terminology Handbook Glossary
delay on break A term used to describe a mode of operation relative to timing devices.
The delay begins when the initiate switch is opened (delay break of
initiate switch).
delay on energization A term used to describe when the initiate switch is closed for application of
power to the input.
delay skew The difference in propagation delay between any two balanced twisted-pairs
within the same cable sheath. (TIA) Usually used in reference to the delay
between the balanced twisted-pair with the highest and the lowest signal
propagation delay value.
delay spread In radio systems experiencing multipath, the difference in time of the
arrival at the receiver of the earliest multipath component (often line of
sight [LoS]) and the latest multipath component. Excessive delay spread can
cause intersymbol interference.
delayed egress Panic or fire exit hardware (required by building code) that allows a 15
second delay before opening.
delinquency signal A signal indicating the need for action in connection with the supervision of
guards or system attendants.
delivered audio quality A subjective scale used to measure the quality of sound over a voice
(DAQ) telecommunications system. Often used in specifications for wireless voice
systems. There are seven DAQ levels. The minimum allowable level
specified typically is DAQ 3.
delta The difference between two values, symbolized with a triangle (∆).
delta power system A three-legged non-grounded configuration with one equal potential
between legs.
demand priority An arbitration scheme that provides network access on the basis of the
priority level of the message or sending device.
demarcation point 1. A point where the operational control or ownership changes. (TIA) 2. The
(demarc) point of interface between service providers (SPs) and customer facilities.
Also referred to as minimum point of entry (MPOE). See also building
entrance and building entrance terminal.
deviation In radio systems, the maximum range that a total signal extends above and
below the carrier frequency.
device An item serving a particular purpose and used to perform one or more tasks.
dialer 1. The software used by remote stations to connect to the network over
telecommunications circuits. 2. An electronic device connected to a
telecommunications line that monitors incoming dialed digits and changes
them or adds to them, transparently providing services that would otherwise
require long access codes. For example, a dialer could provide one
commercial carrier for domestic calls and another for international calls.
die Metallic block or plate with small conical holes through which wire is drawn
or thermoplastic is injected as part of a manufacturing process.
dielectric cable A non-conducting cable (e.g., optical fiber cable with no metallic members).
dielectric strength A specification of the maximum voltage that an insulation can withstand
without breakdown.
differential mode The differences in attenuation among the various modes in an optical
attenuation fiber cable.
differential mode The ratio of voltage to current on a pair of transmission channels when
impedance one conductor carries a signal in opposite phase to another (e.g., one signal
positive and the other signal negative).
differential mode The symmetrical noise voltage that appears equally and in opposite phase in
voltage each active signal-carrying conductor.
diffraction The bending of radio, sound, or light waves around an object, barrier, or
aperture edge.
dispersion unshifted A singlemode optical fiber that has a nominal zero-dispersion point at a
wavelength of 1300 nanometers (nm). Also called conventional or unshifted
optical fiber.
dissipation factor The relative power loss in the insulation due to molecular excitement and
subsequent kinetic and thermal energy losses.
distributed access An access control system (ACS) in which all control decisions are made at
control the local controllers, independent from a host computer. Local controller
events are uploaded to a host computer periodically for review and storage.
distribution cell The cellular floor sections from which cables emerge into work areas.
distribution duct A raceway of rectangular cross-section placed within or just below the
finished floor and used to extend the wires or cables to a specific work
area. (TIA)
distribution frame A structure with terminations for connecting the cabling of a facility in
such a manner that interconnection or cross-connections may be readily
made. (TIA)
distribution layer A collection of switches between the core and access layer. Distribution
switches may be a switch and external router combination or a
multilayer switch.
distribution panel A wiring board that provides a patch panel function and mounts either in a
rack or on a wall.
distribution ring Wire and cable management ring shaped like the letter D for routing and
(D ring) supporting distribution cables and jumpers/patch cables on a backboard.
See also cable management.
distribution system A bridging engine in access points that is used to connect access points. The
connection can be wired or wireless.
diverse route An alternative routing for cables and services to provide a different pathway
for resilience or security. See also alternate route.
electrical coupling The transfer of energy between two or more electrically conducting
bodies. This energy can be through a direct connection or an indirect
connection (e.g., electromagnetic interference [EMI], radio frequency
interference [RFI]).
electrical distribution An assembly, mounted in or on a wall and accessible primarily from the
panel (EDP) front, consisting of enclosures, buses, and switches to control light, heat,
and power circuits. Similar to an electrical distribution cabinet, except the
panel is mounted to a vertical surface and a cabinet is floor mounted.
electrical metallic Thin-wall metal tubing that does not have threaded ends, which is
tubing (EMT) widely used in electrical distribution systems and as a pathway for
telecommunications cabling.
electrified door release A generic term for electromechanical locking hardware that is released upon
hardware an approval signal.
electromagnetic The ability of equipment to function in a manner that makes them immune to
compatibility (EMC) certain amounts of electromagnetic interference (EMI), while keeping the
interference generated by them within specific limits.
electromagnetic field The energy field radiating from a source and containing both electric and
magnetic field components. An electric field is a field surrounding a
charged object. A magnetic field is the field surrounding any current-
carrying conductor.
electromagnetic field A tester that measures the presence of electromagnetic fields. Used to
tester identify possible electromagnetic interference (EMI) sources and strength.
electromagnetic lock An electric lock that uses an electromagnet to hold a door closed.
electromagnetic pulse A high-intensity electromagnetic field. EMPs can disrupt electronic and
(EMP) electrical systems, sometimes causing permanent damage.
electromagnetic shield Any structure used to divert, block, or impede the passage of
electromagnetic energy.
electromagnetic The full range of electromagnetic emissions, including all light and
spectrum radio waves.
electronic access A system composed of computer software and hardware for managing access
control (EAC) to identified spaces through the use of established security levels, issued
credentials, and peripheral electronic hardware, including door contacts,
request to exit (REX) devices, card readers, and electronic locking hardware.
Electronic Industries An alliance organized along specific electronic products and markets. The
Alliance (EIA) EIA also develops and publishes industry standards.
electronic serial A unique 32-bit serial number permanently stored in the mobile station or
number (ESN) cellular equipment by the manufacturer. The ESN is transmitted during the
authentication process.
electrostatic coupling The induction of electrical charges in electrical conductors that may be the
result of capacitive coupling from the electric field (e.g., nearby power line).
entrance facility (EF) An entrance to a building for both public and private network service cables,
including wireless, mechanical and electrical services, and the entrance
point at the building wall, and continuing to the entrance room or space. See
also building entrance, demarcation point (demarc) and entrance room
or space.
entrance point (EP) The point of emergence for telecommunications cabling through an exterior
wall, a floor, or from a conduit. (TIA)
entrance room or space A space in which the joining of inter or intrabuilding backbone facilities
takes place. (TIA) See also entrance facility (EF).
equal level far-end Crosstalk measured at the opposite end from which the disturbing signal
crosstalk (ELFEXT) is transmitted, normalized by the attenuation contribution of the cable
or cabling.
equalizer An electronic device that compensates for the selective frequency losses of
the cable that feeds into it to provide equalization.
equalizing conductor A conductor for the equalization of different ground (earth) points of a
building to keep them at the same potential (zero volts).
equipment grounding The conductor used to connect the noncurrent-carrying metal parts of
conductor equipment, raceways, and other enclosures to the system-grounded
conductor, the grounding electrode conductor, or both at the
service equipment.
equipotential bonding Properly designed and installed electrical connections putting various
exposed conductive parts and extraneous conductive parts at a substantially
equal potential, especially during normal non-transient conditions.
equivalent facilitation The concept of making any object equally accessible or usable to persons
with physical disabilities. In building and construction, equivalent facilitation
is usually achieved with special accessibility features (e.g., ramps, powered
door operators, visual alarm appliances).
exposed facilities Any cable facilities subjected to such effects as lightning, power crosses,
power induction, or differences in ground potential.
extended service set A collection of access points (APs) that are tied together by a wired
(ESS) backbone in a single collision domain, or by virtual LANs (VLANs), to
allow Layer 2 (data link layer) roaming.
extensible markup A specification developed by the World Wide Web Consortium (W3C). XML
language (XML) is a pared-down version of the standard generalized markup language,
designed especially for website documents. It allows designers to create their
own customized tags, enabling the definition, transmission, validation, and
interpretation of data between applications and between organizations. XML
has been widely adopted for use in the integration of computing systems with
automation and control systems as the underlying language behind XML
website services.
=F
F connector A 75-ohm radio frequency connector typically used in cable TV and on
entertainment devices for coaxial cable. Used for RG 59/6 and RG 7/11 type
cables to attach drop cables to directional couplers (taps), splitters, end-user
equipment (e.g., TVs) and other devices. An F connector does not have a
center pin. An F connector uses the solid copper center conductor of the
coaxial cable as the center pin to establish the connection.
facility code The coded data in access control cards that identifies the location of the
access control system (ACS).
Faraday cage A metallic enclosure that is designed to prevent the entry or escape of
electromagnetic fields. An ideal Faraday cage consists of an unbroken
perfectly conducting shell. This ideal cannot be achieved in practice but can
be approached.
Faraday’s Law A law stating that an oscillating magnetic flux field will lead to the
generation of an oscillating voltage in a conductive loop placed in that field.
far-end crosstalk A measure of the unwanted signal coupling from a transmitter at the near end
(FEXT) loss into another pair measured at the far end, and relative to the transmitted
signal level. Also called input/output far-end crosstalk loss. (TIA)
Fast Ethernet An IEEE 802.3 Ethernet LAN protocol with a data transfer rate of
100 megabits per second (Mb/s). See also 10 Gigabit Ethernet, Ethernet, and
Gigabit Ethernet.
fastener A screw, bolt, clamp, or nail-like device that is used to secure an item to a
wall, floor, or ceiling.
fault An open, ground, or short condition on any line extending from a control
unit, which could prevent normal operation.
fault management The detection, isolation, and correction of hardware or software conditions
that disrupt network operations.
fault tolerance The ability of a system to continue operations after the failure of one or more
components or communications paths.
Federal Communications The regulatory body for United States (U.S.) non-federal telecommunications
Commission (FCC) services and international services originating in the U.S.
feed horn A device that concentrates radio frequency (RF) energy into a waveguide,
antenna radiator, or antenna reflector.
femtocell 1. A small, low-power cellular base station, typically designed for use in a
home or small business. Most femtocells have a range of ≈10 meters
(m [33 feet (ft)]). A femtocell allows service providers to extend service
coverage indoors or at the cell edge, especially where access would
otherwise be limited or unavailable. 2. One type of small cell.
ferroresonance The resonance of iron molecules due to the application of a magnetic field
that produces a magnetic flux on the iron structure. This is the principal
operation of transformers.
ferroresonant A device that regulates alternating current (ac) voltages, capable of acting as
transformer a step-up or step-down voltage transformer and as an ac voltage regulator.
ferrule (optical fiber) The alignment sleeve portion of an optical connector used to protect and
align the stripped optical fiber.
ferrule connector (FC) An optical fiber connector with a threaded body which was designed for use
in high-vibration environments. It is commonly used with both singlemode
optical fiber and polarization-maintaining optical fiber cabling. Commonly
referred to as fiber connector. See angled physical connector (APC).
fiber connector (FC) The device used to hold and align one or more fibers in interface with
another fiber or fibers (when not referring to the specific type of connector
designated FC).
fiber distributed data A fault-tolerant token-passing network protocol based on single or dual
interface (FDDI) optical fiber rings.
fiber distribution unit An administrative housing used to terminate fiber cables and connectors for
the purpose of interconnections and cross-connection.
fiber fault finder A small handheld visible light source consisting of a light-emitting diode
(LED), lamp, or visible laser. Used to identify fibers, faulty connectors, fiber
breaks, and critical bends. The bad connector (break in the fiber) will glow
from the light source and be visible on many fiber sheath types. Also called a
visual fault locator (VFL).
fiber span The length of optical fiber cable between poles or maintenance holes (MHs).
fiber strand identifier A clamp-on testing unit for optical fiber that places a microbend into the
cable to detect light escaping from the fiber.
Fibre Channel A technology for transmitting data between computer devices at high data
rates. Fibre Channel is especially suited for connecting computer servers to
shared storage devices and for interconnecting storage controllers and drives.
field of view The area or volume, typically angular or conical in shape, that a sensor or
device can detect an input.
© 2017 BICSI® Gl-73 ICT Terminology Handbook V2.0
Glossary BICSI's ICT Terminology Handbook
fish tape A tool or device that can be extended from the beginning of a pathway to the
other end to assist in installing a pull line or to pull in a cable.
fixed connector (FC) A type of optical fiber connector identifiable by its round, screw-operated
locking nut. It is usually metal. Its ruggedness leads it to be widely used in
test equipment.
Fixed Service (FS) A radiocommunications service between specified fixed points. (FCC 47
C.F.R. § 2.1(c))
fixed-temperature A device that responds when its operating element becomes heated to a
detector predetermined level.
flame detector A fire detector that detects the radiant energy emitted by a flame.
flame detector sensitivity The distance along the optical axis of a detector at which the device can
detect a fire of specified size and fuel within a given time frame.
flash cut A process of migrating from an existing system to another where all circuits
are cutover at once. See also cutover.
flashing Pieces of sheet metal (or similar material) used to cover and protect certain
joints and angles.
flat network A network that consists of a single broadcast domain. See also
broadcast domain.
flex Flexible wide-area synchronous protocol.
flexible conduit Raceway of circular cross-section that is bendable without the use of tools.
float current The current that is drawn by a battery when it is being kept in a fully charged
state. The float voltage will determine this current. See float voltage.
float voltage The voltage at which a battery is maintained (floated) in order to keep it in a
fully charged state. See float current.
form and dress cable The process of lining up cables side-by-side, shaping them into sweeping
arcs, and joining them into loose bundles with tie wrap or other means, to
hold the bundles neatly together.
forward packet data The cdma2000 1xEV-DV data channel on the forward link.
channel (F-PDCH)
forwarding logic The set of rules used by an internetworking device to transfer a received
message to another network.
frame 1. A data unit created at Layer 2 (data link layer) of the Open Systems
Interconnection (OSI) Reference Model. It contains the data, control, and
error-checking information necessary to transfer a message from one device
to another on a LAN. See also datagram. 2. A special purpose equipment
mounting structure.
frame check sequence The product of an error-detecting code normally inserted as the final field in
(FCS) a block of transmitted data. See also checksum and cyclic redundancy
check (CRC).
Frame Relay A network protocol designed to transport messages over extended distances
via a mesh network, using virtual circuits and switches. A high-performance
modification of X.25.
frame synchronization A 32-bit post office code standardization advisory group paging code used to
(FS) identify the beginning of each message batch.
franchise A right-of-way (R/W) granted for placement of outside plant (OSP) facilities
within the domain of public or private property.
free space loss The signal loss that occurs between two antennas in free space, unaffected by
blocking, refraction, diffraction, or absorption.
free space optics (FSO) A low-power laser beam used for outdoor point-to-point high-rate protocol-
independent transmission.
frequency The number of cycles that a periodic signal completes in a given time. If the
unit of time is one second, the frequency is stated in hertz (Hz). One Hz is
equal to one cycle per second.
furniture system Furniture walls combined with furniture units designed to form a work area
(e.g., cubicle).
fuse cable A length of cable that is two gauges smaller than the conductors of the
cable being protected and at least ≈0.6 meters (m [2 feet (ft)]) long. Fuse
cable is inserted in the plant and intended to open on excessive foreign
power currents, thus protecting the station wiring cable or apparatus. Fuse
cable does not protect against lightning currents or sneak currents. Also
called fuse cable link and fuse link.
fusing 1. The process of joining fibers together by fusion or melting. 2. The process
of joining materials through a chemical or heating process. This fusing can
occur as an unwanted action that can appear as an open or a short.
fusion splice A permanent joint accomplished by applying localized heat sufficient to fuse
or melt the ends of two optical fibers together, forming a continuous
single fiber.
=G
gain 1. The ratio of output current, voltage, or power relative to input current,
voltage, or power, respectively. Gain is usually expressed in decibels (dB).
If the ratio is less than unity, gain will be negative, in which case there is
a loss between input and output. 2. The ratio of an antenna’s maximum
radiation intensity to that of a radiator in the far field of its main (forward
direction) lobe. (FCC) See also effective radiated power (ERP) and
equivalent isotropically radiated power (EIRP).
gamma rays Electromagnetic frequencies between 30 exahertz (EHz) and 3000 EHz.
gas tube protector An overvoltage protector featuring metallic electrodes that discharge in a gas
atmosphere within a glass or ceramic envelope. This type of protector does
not require replacement each time it discharges.
general alarm An alarm signal that is not specific to an individual device or area. General
alarms are signaled throughout an entire building or area and usually result in
the evacuation of occupants.
general conditions Any of a number of standards or code documents published that are
applicable to the project delivery method.
gigabit Ethernet (GbE) An IEEE Ethernet LAN protocol with a data transfer rate of 1000 megabits
per second (Mb/s). See also 10 Gigabit Ethernet, Ethernet, and Fast Ethernet.
gigabit per second (Gb/s) A transmission rate denoting one billion bits per second.
gigahertz (GHz) A unit of frequency denoting one billion cycles per second. See also
hertz (Hz).
global area network A network of different interconnected computer networks that covers an
(GAN) unlimited geographic area.
global unlock An input that, when activated, generates an access control system (ACS)
signal that unlocks doors.
grade 1. The slope of a surface with a vertical rise or fall expressed as a percentage
of the horizontal distance. 2. For a communications circuit, a category
defining the level of the circuit’s capability.
graded-index fiber A multimode optical fiber design in which the refractive index decreases
continuously from the center of the core to the outside of the core. The
purpose is to reduce modal dispersion and thereby increase fiber bandwidth.
gray scale An image in which the value of each pixel is a single sample or a pattern
of dots that is used to represent a particular shade, typically composed of
shades of gray (varying from black at the weakest intensity to white at
the strongest).
ground enhancement Any material used to enhance the soil for a low resistance to ground.
material
ground fault circuit A device intended for the protection of personnel that functions to de-
interrupter (GFCI) energize a circuit or portion thereof, within an established period of time,
when a current to ground exceeds the values established for a Class A
device. (NEC)
ground line In outside plant (OSP) aerial cabling, the ground line is the point where the
pole enters the earth.
ground loop Interference in electrical communication links due to the ground at each end
being at different potentials.
ground plane A system of conductors placed beneath an elevated antenna as a near field
reflective point serving as an earth ground.
ground potential The zero reference level used to apply and measure voltages in a system.
ground potential rise A voltage difference between a grounding electrode system and the earth
(GPR) return currents produced by a lightning strike or a power fault current.
ground wave A low frequency (LF), medium frequency (MF), or high frequency (HF)
radio wave that bends along the earth’s surface rather than traveling through
the atmosphere because of different refractive indexes.
ground wire See bonding conductor (BC) and bonding conductor for
telecommunications (BCT).
grounding conductor A conductor used to connect the grounding electrode to the building’s main
grounding busbar. (TIA)
grounding electrode 1. A conductor, (usually a rod, pipe, plate, or group of conductors), in direct
contact with the earth for the purpose of providing a low-impedance
connection to the earth. (TIA) 2. A device that establishes an electrical
connection to the earth. (NEC)
grounding electrode The conductor used to connect the grounding electrode to either the
conductor (GEC) equipment grounding conductor, or to the grounded conductor of the
circuit at the service equipment, or at the source of a separately derived
system. (TIA)
grounding electrode One or more grounding electrodes bonded to form a single reliable ground
system for a structure.
grounding mat An extensive system of bare conductors, buried below the surface of the
earth, intended to provide a low-resistance connection to earth and to
equalize the potential within the area covered. (TIA)
grounding system A system of hardware and wiring that provides an electrical path from a
specified location to an earth ground point.
grounding terminal A suitable bar, bus, terminal strip, or binding post terminal where grounding
and bonding conductors can be connected.
ground-reflected wave The portion of a wave that reaches a receiving antenna after it has reflected
off the earth’s surface.
grunt sack A bag that is raised and lowered on a rope to provide a means of safely
passing tools and small materials between individuals working in a
construction environment.
guaranteed maximum Bidders may be required to state a GMP that is not to be exceeded.
price (GMP) This allows the owner an understanding of the absolute maximum cost of the
project before start of construction.
guard’s tour reporting A device that is manually or automatically initiated to indicate the route
station being followed and the timing of a guard’s tour.
guy 1. In utility pole systems, a steel stranded wire used to provide counter
tension to the pole opposite that of the installed cable pull tension to keep
the pole upright. 2. For communications towers, a steel stranded wire used
for support and to resist wind loading.
guy rod end A single, double, or triple eye at the end of a guy rod for the attachment of
the guy wire to the connect point above the ground anchor.
=H
half-duplex channel A communications channel that can transfer signals in either direction, but
not at the same time.
half-duplex signaling A bidirectional signaling method in which data transfer can take place in
either direction, but in only one direction at a time.
half-tap The attachment of one conductor to another where the through conductor is
not cut until the cutover takes place. This is a hot cut penetration step.
hand geometry A biometric reader that verifies a person’s identity using the variations in
hand size, finger length, and finger thickness.
hand trace The act of physically hand tracing a cable, patch cord, jumper, or cross-
connect from one known point to another known point to determine its path.
handhole (HH) A structure similar to a small maintenance hole (MH) in which cable can be
pulled, but not large enough for a person to fully enter to perform work. See
also vault.
handoff 1. The process that occurs when a mobile user moves from one cell or zone
(thereby terminating communications) to another cell or zone (thereby
initiating communications) in a wireless network. The handoff is
accomplished without disruption of the exiting connection. 2. The transfer of
control from one cell to another in cellular wireless networks.
high-order mode Losses in optical signal level power caused by the attenuation of weakly
transient losses guided high-order modes of multimode optical fiber.
high pair-count cable Cables consisting of multipair conductors formed into binder groups of
25 pairs.
high rate direct sequence A form of wireless signaling similar to DSSS, but employing a more
spread spectrum advanced coding scheme to enable higher data rates.
(HR/DSSS)
high-rise building 1. A building having many stories and serviced by elevators. 2. A building
with upper floors higher than fire department aerial ladders, usually ten or
more stories.
high-speed downlink A third generation (3G) mobile telephony digital cellular standard based
packet access (HSDPA) on the evolution of wideband code division multiple access
(WCDMA) technologies.
horizontal cabling The part of the cabling system that extends from (and includes) the work
area telecommunications outlet/connector to the horizontal cross-connect
(HC [floor distributor (FD)]) in the telecommunications room (TR).
horizontal consolidation A segment of horizontal cable between the consolidation point connector
point/telecommunications and the telecommunications outlet/connector. This cable should be easily
outlet cable moved for modular office rearrangement.
horizontal cross-connect A group of connectors (e.g., patch panels, punch-down blocks) that allow
(HC) horizontal, backbone, and equipment cabling to be cross-connected with
patch cords or jumpers. Floor distributor (FD) is the international equivalent
term for horizontal cross-connect.
horizontal directional A method for placing underground facilities that uses a directed horizontal
drilling auger or drill to establish the path, place casings or cables, and minimize
restoration costs associated with plowing or trenching.
horizontal HC-CP cable The segment of horizontal cable permanently installed between the
horizontal cross-connect (HC) and the consolidation point (CP) connector.
host In the Internet environment, the term used to describe any network-attached
device that provides application-level services.
host computer The central controlling computer on which access control software runs.
host identification A part of an Internet protocol (IP) network address. It identifies a specific
(hostid) device within a broadcast domain. See also network identification (netid).
hot cut A cutover where the active cables are unplugged from the old system and
plugged into the new system. See also cutover.
hot spot A temperature reading, taken at the air intake point of equipment mounted in
a rack or cabinet, in excess of the design standard or equipment requirement.
household fire alarm A fire alarm system used in dwelling units. See fire alarm system.
system
hub A network device that provides a centralized point for Ethernet LAN
communications, media connections, and management activities of a
physical star topology cabling system. Hubs route all packets from the
incoming port to all other ports, performing no filtering or routing. Hubs do
not separate collision domains. Also called multiport repeater.
hunt group A group of associated telephone lines within which an incoming call is
automatically routed to an idle (not busy) telephone line for completion.
hybrid cable A manufactured assembly of two or more cables, of the same or differing
types or categories, covered by one overall sheath.
input impedance The ratio of the voltage at the sending end of the line to the current in the
line at the sending ends.
input source transfer The function of and the location in the electrical system where the transfer
occurs between two sources.
inrush (amperes) The current that a device requires during its initial power-up.
insert A fitting installed into an opening into the distribution duct or cell from
which wires or cables emerge.
insert, afterset An insert installed after the installation of the concrete floor slab or other
flooring material. (TIA)
insert, preset An insert installed prior to the installation of the concrete floor stab or other
flooring material. (TIA)
insertion card A card that must be inserted into a card reader to retrieve the information
stored on it.
insertion loss The signal loss resulting from the insertion of a component, or link, or
channel, between a transmitter and receiver (often referred to as attenuation).
(TIA) See also attenuation.
insertion loss deviation The difference between the actual insertion loss as measured on a permanent
link or channel and the insertion loss as determined by adding the component
losses. (TIA)
insulating gap An insulator (e.g., ceramic link) in a down guy that prevents the flow of
currents that may cause electrolytic corrosion. See isolation gap.
insulation The dielectric material that physically separates wires and prevents
conduction between them.
insulation displacement A type of wire terminating connection in which the conductor’s insulation
connector (IDC) jacket is cut by the connector where the insulated wire is inserted, making a
connection to the conductor.
insulation resistance The insulation’s ability to resist the flow of current through it. For inside
conductors, insulation resistance is typically expressed in megohm•kilometer
or megohm•1000 feet.
integrated digital A wireless technology developed by Motorola that provides digital cellular
enhanced network telephone, two-way radio, alphanumeric pager, and data/fax modem services
(iDEN®) in a single network.
integration 1. The seamless gathering of similar and dissimilar components into one
system. 2. The concept of using a single network infrastructure for multiple,
otherwise dissimilar, systems (e.g., telecommunications, building
management, security, safety). See also convergence.
integrity attack An unauthorized attempt to modify the contents of one or more files on a
network. See also data integrity.
intelligent device (ID) An addressable device used to monitor and control functions in a building
automation systems (BAS) network.
intensive care unit (ICU) A hospital unit in which patients requiring close monitoring and intensive
care are housed for as long as needed. An ICU contains highly technical and
sophisticated monitoring devices and equipment, and the staff in the unit is
educated to give critical care.
intentional radiator A device designed to generate and emit radio frequency (RF) energy during
operations using radiation or induction.
interbuilding backbone 1. Cable that runs between buildings in a campus environment. 2. Customer-
cable owned outside plant (OSP) cabling.
interconnection 1. A device for the direct connection of a cable to another cable without
a patch cord or jumper (e.g., pass-through bulkhead). 2. A type of connection
in which single-port equipment connections (e.g., copper and optical fiber
connectors) attach to horizontal or backbone cabling by means of equipment
cords or optical fiber jumpers.
interior An area not directly connected to the perimeter walls of a building. For
electronic safety and security (ESS) systems, these areas tend to require
specific sensors because the protection is usually for both spaces and objects
within the spaces.
interlock A system of multiple doors that control interaction. No door can be unlocked
unless all other doors are secure and locked.
intermediate care Care rendered to patients whose physiological and psychological status is
such that they require observation and nursing for the presence of real or
potential life-threatening disease or injury. These patients may require
monitoring devices, ventilator support, intravenous (IV) therapy, frequent
suctioning, dressing changes or reinforcements, and ambulation.
intermediate cross- The connection point between a backbone cable that extends from the main
connect (IC) [building cross-connect (MC [campus distributor (CD)] first-level backbone) and the
distributor (BD)] backbone cable from the horizontal cross-connect (HC [floor distributor
(FD)] second-level backbone). Building distributor (BD) is the international
equivalent term for intermediate cross-connect (IC). Formerly called the
intermediate distribution frame (IDF).
intermediate fire alarm A control unit used to provide area fire alarm or area fire supervisory service
unit that, where connected to the proprietary fire alarm system, becomes a part of
that system.
intermediate frequency The frequency resulting from the combination of the received frequency with
(IF) the locally generated frequency (by a local oscillator circuit) equal to their
differences or sum.
intermediate network A network used to connect two or more networks. See internetwork.
intermittent duty A current-carrying coil of wire that acts like a magnet when a current passes
solenoid through it that is designed to be energized for short periods of time.
Continuous operation may damage an intermittent duty solenoid.
main building ground The designated point to which all grounding systems of the utilities in a
electrode building are connected. The primary building or structural elements that
are in direct physical contact with the earth, such as metal underground water
pipe, metal frame of the building, concrete-encased electrode, ground ring,
rod and pipe electrodes, plate electrodes, and other local metal underground
systems or structures (e.g., piping systems, underground tanks). Used
to establish an electrical current path to earth for electrical and
telecommunications services and infrastructure systems.
main cross-connect The cross-connect normally located in the (main) equipment room for cross-
(MC [campus distributor connection and interconnection of entrance cables, first-level backbone
(CD)]) cables, and equipment cables. Campus distributor is the international
equivalent term for main cross-connect.
main distribution area The space in an equipment room where the main cross-connect is located.
(MDA)
main distributor (MD) A distributor used to make connections between the main distribution cabling
subsystem, network access cabling subsystem, and cabling subsystems
specified in ISO/IEC 11801 or EN 50173-1 and active equipment.
Referenced in CENELEC EN 50173-5 and ISO/IEC 24764. Equivalent to
the main cross-connect in ANSI/TIA-942-A.
main electrical The busbar at which electrical service grounding electrode conductors
grounding busbar (GECs) and other bonding and grounding (earthing) conductors are
(MEGB) interconnected to establish the main equipotential location for the building.
main terminal space The location of the cross-connect point of incoming cables from the
telecommunications external network and the premises cabling
system. (TIA)
maintenance hole (MH 1. A vault located in the ground or earth as part of an underground duct
[telecommunications]) system and used to facilitate placing, splicing, and maintenance of cables,
as well as the placing of associated equipment, in which it is expected that
a person will enter to perform work. Formerly called manhole. See also
vault. 2. A hole through which access to an underground or enclosed
structure may be gained.
maintenance mode A system state resulting from an anticipated system outage or routine
maintenance activity and typically a manual system response to that activity.
make ready The process of preparing an existing aerial pole line for new attachments.
multipath fading On a wireless network, the signal loss caused by multipath propagation.
multipath propagation On a wireless network, the arrival of signals from different directions, each
with a different path length.
multiple aperture The separate transmit and receive antennas within a free space optics
(FSO) transceiver.
multiple input multiple A multiplexing technique that uses multiple transmit and receive antennas.
output (MIMO)
multiple prime contract A project management method whereby the owner divides the work among
several contractors and enters into a separate contract with each.
multiple station alarm Two or more single station alarm devices that can be interconnected so that
device actuation of one causes all integral or separate audible alarms to operate; one
single station alarm device having connections to other detectors or to a
manual fire alarm box.
multiple zone wireless A WLAN with two or more overlapping zones, each equipped with an access
LAN (WLAN) point (AP).
multiplexing (muxing) The combining of two or more communications channels into a common,
high-capacity channel from which the original signals may be
individually recovered.
multipoint microwave A wireless broadband technology for Internet access, also called multi-
distribution system channel multipoint distribution service (MMDS) and wireless cable.
(MMDS)
National Fire Protection The association that writes and administers the National Electrical
Association (NFPA) Code® (NEC®).
nationally recognized An organization recognized by the government and industry that tests
testing laboratory products according to their application or purpose. Test results are often used
(NRTL) for insurance underwriting.
natural events Incidents that include drought, fire, avalanche, snow/ice/hail, tsunami,
windstorm/tropical storm, hurricane/typhoon/cyclone, biological, extreme
heat/cold, flood/wind-driven water, earthquake/land shift, volcanic eruption,
tornado, landslide/mudslide, dust/sand storm, and lightning storm.
near-infrared The part of the infrared (IR) spectrum near the visible spectrum, typically
700 nanometers (nm) to 1500 nm or 2000 nm; it is not rigidly defined. Also
called IR-A.
near-end crosstalk The unwanted signal coupling between pairs. It is measured at the end of a
(NEXT) loss cable nearest the point of transmission.
near-field radiation 1. The distribution of the irradiance over an emitting surface (over the cross-
pattern section of an optical waveguide). 2. The propagation pattern of a radio
frequency (RF) wave physically very close to the transmitting antenna,
relative to the wavelength. This pattern is very different from, and much
more complicated than, the far-field radiation pattern usually considered in
RF propagation.
needs assessment An evaluation of the requirements or demands of a user community for the
particular project or technology under consideration.
neonatal intensive care An intensive care unit for high-risk newborn babies (neonates), directed
unit (NICU) by a board-certified pediatrician with subspecialty certification in
neonatal medicine.
=S
S mark A European safety mark valid throughout the European Union. Products
bearing the S mark demonstrate compliance with legal European electrical
safety requirements via third-party testing.
saddle 1. A device for establishing the position of the raceway or raceways within
the concrete relative to the screed line and for maintaining the spacing
between the raceways. (TIA) 2. A supporting device for horizontal cable
made of flexible cloth, vinyl, or plastic in a sling- or U-shape and attached to
the building structure. Horizontal cables are laid across the fabric to provide
support for the cables. An alternative to J-hooks.
safety committee Committee composed of employees, management, and other staff members
whose purpose is to oversee safety practice.
safety margin 1. Power loss value (in decibels [dB]) used to assure optical fiber cable
performance criteria will be satisfied over the life of the network. Includes
expected losses in source power, splice losses, and wear and tear of
connectors and adapters. See also link loss budget. 2. The margin required in
order to ensure safety.
safety plan A plan prepared by a company and put in place before beginning any work
operation, covering all safety issues likely to arise on a particular work site.
sag 1. A decrease in nominal root mean square (rms) voltage or current lasting
0.5 cycles up to one minute. 2. The difference in height between an aerial
cable mounting and the height of the cable above the surface at its lowest
point between supports.
Sarbanes-Oxley Act A United States (U.S.) federal law that set new or enhanced standards for
of 2002 all U.S. public company boards, management, and public accounting firms.
The law imposes numerous recordkeeping and accounting requirements
in response to a number of major corporate and accounting scandals. One
consequence of the law is a substantial increase in the costs associated with
electronic recordkeeping, data processing, and network traffic to support the
reports and records required by the law.
S-band The frequency spectrum used for land-based microwave and some mobile
satellite communications. The S-band uplink band is 5.855-6.055 gigahertz
(GHz) and the downlink band is 2.535-2.655 GHz.
scaffold A temporary structure for holding workers and materials during the erection,
repair, or decoration of a building. (dictionary.com)
scale-independent A graphical depiction of an item having a plotted size that is always the
same, regardless of the scale of the drawing in which it appears. For
example, a triangular symbol for a faceplate, which always appears
≈4.8 millimeters (mm [0.19 inches (in)]) on a side, regardless of the scale of
the drawing.
scan A non-intrusive analysis technique that identifies the open ports found on
each live network device and collects the associated port banners found as
each port is scanned. Each port banner is compared against a table of rules
to identify the network device, its operating system, and all
potential vulnerabilities.
scanner 1. The equipment located at the telephone company headend cabling center
that monitors each local leg and relays status changes to the alarm center.
Processors and associated equipment also might be included. 2. A device
that verifies cabling segments for wiring pair scheme compliance (e.g.,
opens, shorts, crossed, reversed, and split pairs). The device may also
measure cabling length and cabling performance. 3. A radio receiver
designed to jump quickly and continuously among a range of frequencies,
pausing when a signal is detected to allow the user to stop the scan process.
This allows the user to monitor a large number of frequencies for traffic.
scattering In optical fiber cabling, the deflection of light from the path it would follow
if the refractive index were uniform or gradually graded. Caused primarily
by micro-defects, impurities, and molecular structure in the fiber. See also
Rayleigh scattering and Mie scattering.
scatternet A network of two or more piconets in a common area, where each piconet
contains at least one Bluetooth® device that is part of two or more piconets.
schematic design A design phase that follows preliminary planning and scope development
and occurs prior to design development. This phase typically takes the design
to about 30 percent.
scintillation In free space optics (FSO), the temporal and special variations in light
intensities caused by differences of refractive index along the propagation
path due to slight temperature variations among different air pockets.
scope of work (SoW) A document that provides detailed statements and descriptions of the work
content for the project requirements.
screen A thin metallic wrapping (e.g., aluminum foil) used to isolate cable pairs
from interference. See also foil shield.
screened twisted-pair A balanced twisted-pair cable with an overall screen (shield) surrounding all
(ScTP) cable of the pairs, possibly with a drain wire. The entire assembly is covered with
an insulating sheath (cable jacket). This type of shielding protects against
electromagnetic interference (EMI) from entering or exiting the cable. One
type of ScTP is called foil twisted-pair (FTP) cable and uses foil shielding
instead of a braided screen.
screened/foil twisted-pair A balanced twisted-pair cable with one or more pairs of individual foil-
(S/FTP) cable screened balanced twisted-pairs having an overall braid-screen shield and
may contain a drain wire. The entire assembly is covered with an insulating
sheath (cable jacket). This type of shielding protects against electromagnetic
interference (EMI) from entering or exiting the cable and also protects
neighboring pairs from crosstalk. This cable construction is common in ISO
class F/category 7 and higher cabling.
scribing tool 1. A device used to remove cable sheaths. 2. A device used to remove
excess bare fiber during optical fiber connector termination. Also called a
cleaving tool.
sealant A material that has the adhesive and cohesive properties to form a seal.
secondary operation Radio communications which may not cause interference to operations
authorized on a primary basis and which are not protected from interference
from those primary operations. (FCC)
secondary side The low-voltage side of the electrical power service transformer or the load
side of the uninterruptible power supply (UPS), power distribution unit
(PDU) transformer, or static switch.
secondary test After acceptance testing, additional tests that are conducted to diagnose a
problem or verify the cabling to additional requirements.
ICT Terminology Handbook V2.0 Gl-164 © 2017 BICSI®
Glossary BICSI's ICT Terminology Handbook
star topology A topology used within communications networks where every individual
network-enabled equipment or device is connected to a central element
(e.g., switch, interconnect).
star-wired ring A physical star configured as a logical ring. Also known as a collapsed ring
through a hub that performs all appropriate routing operations.
static dissipater An array that dissipates static charges by providing a low-resistance route for
the static ground charge to reach the atmosphere, thus preventing a buildup
of the ground charge to the value necessary to trigger a lightning strike.
statistical time division An advanced version of time division multiplexing (TDM). Unlike TDM,
multiplexing (STDM) the STDM method analyzes statistics related to the typical workload of each
input device (e.g., printer, computer) and determines how much time each
device should be allocated for data transmission on the telecommunications
circuit (e.g., T1 or T3 line).
step-index fiber An optical fiber, either multimode or singlemode, in which the core refractive
index is uniform throughout such that a sharp step in refractive index occurs
at the core-to-cladding interface.
T3 (DS3) The digital transmission link consisting of 672 channels to support rates of
44.7 megabits per second (Mb/s), each channel supporting 64 kilobits
per second (kb/s).
tactile notification A notification appliance that alerts by the sense of touch or vibration.
appliance
tap 1. The linking between the bus and the drop cable that connects the
workstation to the bus in 10BASE-5 Ethernet. 2. A device used on
community antenna television cables and voice circuits for matching
impedance or connecting service drops. See also bridged tap.
taper point A splice location where the cable size along a route is reduced.
tapped trunk A cable connection system where a coaxial cable is tapped by means of a
splitter or vampire tap.
T-band spectrum Radio frequencies in the 470-512 megahertz (MHz) range, used mostly for
public safety and business land mobile radio systems.
telecommunications A bonding conductor that should be installed from each piece of equipment
equipment bonding in the telecommunications room (TR) or equipment room (ER) to the
conductor (TEBC) secondary bonding busbar (SBB) or primary bonding busbar (PBB). TEBCs
may also be connected to the rack grounding busbar (RGB), if the rack or
cabinet has one.
telecommunications A connecting device in the work area (WA) on which horizontal cable,
outlet/connector equipment cord, or outlet cable terminates. Provides the means to connect
premises equipment. Does not include the faceplate or housing that contains
the telecommunications outlet/connectors.
telecommunications A telecommunications space that differs from equipment rooms (ERs) and
room (TR) entrance facilities (EFs) in that this space is generally considered a floor-
serving or tenant-serving (as opposed to building- or campus-serving) space
that provides a connection point between backbone and horizontal cabling.
telephone test set A voice circuit-testing device used to identify circuits and perform
diagnostics. Also called a butt set.
telescoping pole A pole used for lifting and moving cable in open ceilings. The pole has
multiple sections inside each other that stretch out and collapse together, like
a telescope.
temperature resistance The time, in hours, that a firestop assembly will withstand a temperature test,
rating (T-rating) such as to raise the temperature of the unexposed surface of the firestop
assembly by 163 °Celsius (C [325 °Fahrenheit (F)]) above its
initial temperature.
temporal code An audible alarm pattern that is standardized over time to make it more
universal or recognizable. For example, the ANSI/NFPA recommended
standard evacuation pattern code for smoke alarms, called the Temporal-
Three alarm signal, or T-3, produces an interrupted four count (three half
second pulses, followed by a one and one half second pause, repeated for a
minimum of 180 seconds).
tensile strength The longitudinal pulling stress needed to break apart a cable or material.
terabit per second (Tb/s) A data transmission speed, where one Tb/s equals 1000 gigabits per
second (Gb/s).
terabyte (TB) A measure of storage capacity where one TB equals 1000 gigabytes (Gb).
terminal block (TB) A unit that serves to terminate cable conductors and is a transition point
between cable conductors.
terminal emulation The process that enables a computer to operate as a terminal for connecting
to a mainframe or minicomputer. See also emulation.
terminal mode A form of remote access where the remote station accesses LAN resources
through a specialized terminal server, which makes all requests for LAN
resources on behalf of the remote station.
terms and conditions A section in a request for quotation (RFQ) or request for bid (RFB) and a
(T&C) contract that defines the terms used and the conditions under which the work
must be performed.
terrestrial microwave Direct microwave communications between two land-based locations. See
also microwave.
tertiary care The provision by a large medical center, usually serving a region or state and
having sophisticated technological and support facilities, of highly
specialized medical and surgical care for complex medical problems.
tested A statement that a product or system has been evaluated against a set
of metrics.
test hole A hole or group of holes dug along a proposed underground route to
determine what utilities or other obstructions may be present.
test procedures The detailed, sequential steps to set the process and conditions necessary to
test the system functionality.
thimble eye rod A device used to place the guy wire(s) within the eye opening when guying
from a main pole to a stub pole or when guying to the ground. Also called a
thimble eyebolt.
trailer string Line attached to the end of a cable being pulled. May be used for future
additional pulls.
transducer 1. A device that changes one form of energy into another. For example, a
speaker is a transducer that converts electrical energy to mechanical energy.
2. In pressurized systems, a device that permits reading the cable pressure in
a pressurized cable.
transfer impedance A measure of shielding performance determined by the ratio of the voltage
on the conductors enclosed by a shield to the surface currents on the outside
of the shield. (TIA)
transfer switch, Self-acting equipment for transferring load conductor connections from
automatic (ATS) one power source to another. See also static switch and transfer
switch, non-automatic.
transfer switch, Equipment operated manually and initiated either locally or remotely for
non-automatic transferring load conductor connections from one power source to another
(also commonly referred to as manual transfer switch). See also static switch
and transfer switch, automatic (ATS).
transition point (TP) A location in the horizontal cabling where flat undercarpet cable connects to
round cable. (TIA)
translational bridge A networking device capable of converting frame formats from one type to
another prior to forwarding messages. It only operates on the logical link
control sublayer of the data link layer.
transmission The movement of information as electrical or optical signals from one point
to another via a medium (e.g., space, wire conductor, optical fiber).
transmission line A bounded medium used to transport a desired signal between two points
(e.g., coaxial cable, waveguide, optical fiber).
transmit opportunity A network protocol that provides a channel access function controlled with a
(TXOP) defined starting time and a maximum duration. Access may be obtained by
contention or through polling.
twisted-pair physical A network protocol that allows for 100 megabits per second (Mb/s)
medium dependent transmission. Another name for ANSI X3.263 standard and copper
(TP-PMD) distributed data interface.
two-level duct An underfloor raceway system installed with the header raceways and the
distribution raceways on two different planes. (TIA)
two-point method A method used to measure optical fiber cable loss using two closely spaced
cursors on an optical time domain reflectometer (OTDR).
=U
Ufer ground See concrete-encased electrode.
U-guard A U-shaped guard, usually ≈2.4 meters (m [8 feet (ft)]) in length, placed over
a cable, on a pole, or on a side of a building to protect a cable.
ultrahigh frequency Frequencies in the range of 300 megahertz (MHz) to 3000 MHz.
(UHF)
Um A global system for mobile telephony air interface component or radio link.
unbalanced tension In outside plant (OSP) aerial cabling, the uneven distribution of tension
(load) on a guy or pole.
underfloor duct system A network of metal raceways embedded in concrete, which facilitates the
distribution of horizontal cables (e.g., between a telecommunications rooms
[TR] or telecommunications enclosure [TE] and a work area [WA]). See also
header duct and trench duct.
underfloor raceway A pathway placed within the floor or under a raised floor system from which
electrical wires and telecommunications cables emerge to service a specific
floor area. (TIA)
underground cable A telecommunications cable designed to be installed under the surface of the
earth in a trough or duct that isolates the cable from direct contact with the
soil. (TIA)
underground facilities Cables placed in subsurface conduits, using maintenance holes (MHs),
handholes (HHs), and pull boxes.
Verified One of four product test ratings used in the United States (Listed, Classified,
Recognized, Verified). In addition to safety testing, Underwriters
Laboratories® (UL®) also produces a performance verification of
communications cabling with the classification of Verified. Optical fiber
cabling manufacturers and their cabling types are listed in the UL
publication, Performance Levels Certification Program, for meeting the base
performance criteria for the product, such as category 3, 5e,
and 6. The Performance Verification Mark allows manufacturers to
demonstrate that telecommunications cabling products are certified for
both safety and performance and comply with industry performance
standards and draft standards. The UL Performance Verification Mark also
signifies the testing of copper and optical fiber cabling products to industry
performance standards such as ANSI/TIA/EIA, ISO/IEC 11801 Ed.2:2002,
NEMA, and Telcordia. It also can be applied to UL Listed optical fiber cable
Verified to Telcordia specifications. The Verification Mark also may be
applied to data transmission or optical fiber cable Verified to performance
specifications only.
vertical down lead A ground wire placed on a pole that leads down to the ground electrode at
(VDL) the base of the pole.
vertical spiral An omnidirectional vertical log periodic antenna may be formed using a
continuous spiral with the radius and spacing of each turn varying in the
same manner as the dipole array relationship. Such an antenna must be
operated over a ground plane and fed unbalanced.
V-groove The position in a fusion splicer where the fiber strand is placed.
vibration resistance The ability of an antenna to mechanically survive the flexing and vibration
caused by wind blowing across it and its supporting structure.
Vigants formula 1. In microwave systems, an equation that models performance factors used
when providing space diversity to an unprotected system.
2. An equation that models rain outages of radio frequency (RF) systems.
virtual LAN (VLAN) A technique made possible by switching technologies that permits the logical
grouping of any number of disparate network devices into one or more
subnetworks to improve traffic management and security.
virtual private network A communications method commonly used to extend a private network
(VPN) across a public network (the Internet) using protocols such as Point-to-Point
Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol/Internet Protocol
security (L2TP/IPSec), or Dynamic Multipoint Virtual Private Network
(DMVPN). It enables a computer to send and receive data as if it were
directly connected to the private network, while benefitting from the
functionality, security, and management policies of the private network.
This is done by establishing a virtual point-to-point (PTP) or point-to-
multipoint connection. A VPN connection across the Internet is similar to a
wide area network (WAN) link between sites. Also called port forwarding
and a tunnel.
virtualization The software and procedures that make it possible for users and
administrators to view and manage a group of storage devices as a single unit
regardless of differences in capacities, locations, and device types.
visible light spectrum The electromagnetic wavelengths visible to the human eye. Located between
the infrared (IR) and ultraviolet (UV) spectrums, visible light has
wavelengths of approximately 390 nanometers (nm) to 759 nm or
frequencies of about 400 terahertz (THz) to 790 THz.
voice frequency (VF) The frequencies within the part of the audio range that are used for the
band transmission of speech. Generally, the frequency band of 300 hertz (Hz)
to 3400 Hz.
voice intelligibility The audible voice information that is distinguishable and understandable.
voice over Internet A system in which voice signals are converted to packets and
protocol (VoIP) transmitted over a network using transmission control protocol/Internet
protocol (TCP/IP).
wireless repeater In security systems, a component used to relay signals between wireless
receivers, wireless control panels, or both.
wire management Hardware designed and manufactured for keeping cross-connect wire and
patch cables neat and orderly. Wire management also may refer to other
types of hardware for securing wire and optical fiber cable to the building.
wire map tester An instrument used to create a wire map. See wire map.
wire mesh cable tray A manufactured wire mesh tray consisting of steel wires welded at all
intersections. Longitudinal wires located on the exterior of the tray are
spaced at a maximum of ≈50 millimeters (mm [2 inches (in)]), and transverse
wires are spaced at a maximum of ≈100 mm (4 in).
wire wrap The termination of conductors by wrapping the conductor tightly around a
rectangular post.
work area A building space where the occupants interact with telecommunications
terminal equipment (e.g., an individual office or cubicle, printer/copier
room). (TIA)
work breakdown A project management tool that breaks the project down into individual tasks
structure (WBS) that can be measured, scheduled, and assigned to individuals or teams.
working group (WG) A group within a larger committee, usually assigned to complete a
specialized task, such as developing usable measurement levels for use in a
standard. See also subcommittee.
wye A power system in which only one point (usually the midpoint of a supply
transformer bank) is grounded. If the neutral is present, it is not grounded
along the line.