2/13/2018 MADE EASY ONLINE TEST SERIES

POWER ELECTRONICS-2 - REPORTS

OVERALL ANALYSIS COMPARISON REPORT SOLUTION REPORT

ALL(16) CORRECT(12) INCORRECT(4) SKIPPED(0)

Q. 1

In a single phase bridge inverter, if the load is under damped, then the load current waveform will be

FAQ Have any Doubt ?

Correct Option
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 1/16
2/13/2018 MADE EASY ONLINE TEST SERIES
Co ect Opt o

Solution :
(c)

Your answer is Wrong

QUESTION ANALYTICS

Q. 2

For three phase inverters, match list-I with list-II and select the correct answer using the code given below the
lists:

Codes:

FAQ Have any Doubt ?

A
a

B
b
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 2/16
2/13/2018 MADE EASY ONLINE TEST SERIES

C
c
Your answer is Correct

Solution :
(c)

D
d

QUESTION ANALYTICS

Q. 3

A single phase half bridge inverter supplied from 230 V dc, feeds a resistance load of 5 Ω. The average and peak
value of current through each thyristor respectively are
FAQ Have any Doubt ?

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 3/16
2/13/2018 MADE EASY ONLINE TEST SERIES

A
46 A, 23 A

B
23 A, 11.5 A
Your answer is Wrong

C
11.5 A, 23 A
Correct Option

Solution :
(c)

D
23 A, 46 A

QUESTION ANALYTICS

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 4/16
2/13/2018 MADE EASY ONLINE TEST SERIES

Q. 4

In the given voltage commutation circuit, Vs = 230 V, L = 20 mH, C = 60 μF for a constant load current of 100 A.
The peak inverse voltage across FD & main thyristor is

FAQ Have any Doubt ?

A
460 V, 460 V

B
230 V, 460 V

C
460 V, 230 V
Your answer is Correct

Solution :
(c)

D
230 V, 230 V

QUESTION ANALYTICS

Q. 5

A step up chopper has input voltage of 220 V and output voltage of 660 V. If the conducting time of thyristor
chopper is 100 μs, the pulse width of output voltage is _______ μs.
FAQ Have any Doubt ?

50
Correct Option
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 5/16
2/13/2018 MADE EASY ONLINE TEST SERIES

Solution :
50

Your Answer is 150

QUESTION ANALYTICS

Q. 6

In the circuit shown below,

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 6/16
2/13/2018 MADE EASY ONLINE TEST SERIES

The effective on period of the chopper if Ton = 800 μs is ________ ms.

FAQ Have any Doubt ?

1.07 (1.00 - 1.20)

Correct Option

Solution :
1.07 (1.00 - 1.20)

Your Answer is .937

QUESTION ANALYTICS

Q. 7

In the 3-Φ inverter circuit shown below, the load is balanced and the gating scheme is 180° conduction mode. All
the switching devices are ideal.

The rms value of output line voltage is _______ V.

FAQ Have any Doubt ?

359.25 (359.00 - 359.40)

Your answer is Correct359.26

Solution :
359.25 (359.00 - 359.40)
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 7/16
2/13/2018 MADE EASY ONLINE TEST SERIES
359.25 (359.00 359.40)

QUESTION ANALYTICS

Q. 8

In the circuit shown below, S is an ideal semiconductor switch, VS is the dc source voltage and V0 is the load emf.

If the duty cycle α is greater than 0.5 the circuit behaves as ________ chopper and if α is less than 0.5 it behaves as
________ chopper.
FAQ Have any Doubt ?

A
step-down; step-up respectively

B
step-up; step-down respectively
Your answer is Correct

Solution :
(b)

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 8/16
2/13/2018 MADE EASY ONLINE TEST SERIES

C
step-down in both cases

D
step-up in both cases

QUESTION ANALYTICS

Q. 9

In a single phase full bridge inverter, Vs = 230 V dc, load consists of RLC in series with R = 1 Ω, ωL = 6 Ω and

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 9/16
2/13/2018 MADE EASY ONLINE TEST SERIES

The fundamental component of current i01 as a function of time is

FAQ Have any Doubt ?

A
146.46 sin (ωt + 45°) A

B
207.1 sin (ωt – 45°) A

C
146.46 sin (ωt – 45°) A

D
207.1 sin (ωt + 45°) A
Your answer is Correct

Solution :
(d)

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 10/16
2/13/2018 MADE EASY ONLINE TEST SERIES

QUESTION ANALYTICS

Q. 10

A single phase half wave ac voltage controller feeds a load of R = 20Ω with an input voltage of 230 V, 50 Hz. Firing
angle of thyristor is 45°. The average input current is
FAQ Have any Doubt ?

A
–0.758 A
Your answer is Correct

Solution :
(a)

B
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 11/16
2/13/2018 MADE EASY ONLINE TEST SERIES

0.512 A

C
–0.512 A

D
0.758 A

QUESTION ANALYTICS

Q. 11

The given commutation circuit has C = 20 μF and L = 5 μH. The initial voltage across capacitor = 230 V for a
constant load current 300 A. The time required to turn off the main thyristor after the auxiliary thyristor is switched
on is

FAQ Have any Doubt ?

A
31 μs

B
17.24 μs

C
38.5 μs
Your answer is Correct

Solution :
(c)

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 12/16
2/13/2018 MADE EASY ONLINE TEST SERIES

D
14 μs

QUESTION ANALYTICS

Q. 12

A single phase full bridge inverter is fed from a dc source such that fundamental component of output voltage is
240 V. If the load is R = 2.0 Ω, XL = 6 Ω, XC = 4 Ω, then the rms value of diode current is
(a) 17.50 A                    (b) 18.08 A
(c) 19.20 A                    (d) 18.57 A
FAQ Have any Doubt ?

18.08 (17.60 - 18.40)

Your answer is Correct18.08

Solution :
18.08 (17.60 - 18.40)

QUESTION ANALYTICS
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 13/16
2/13/2018 MADE EASY ONLINE TEST SERIES
QUESTION ANALYTICS

Q. 13

For type A chopper circuit, source voltage Vs = 220 V, chopping period T = 2000 μs, on period = 600 μs, load circuit
parameters: R = 1 Ω, L = 5 mH and E = 24 V.
The duty cycle ‘δ’ where the limit of continuous current conduction is reached will be ________
FAQ Have any Doubt ?

0.13 (0.01 - 0.20)

Your answer is Correct0.163

Solution :
0.13 (0.01 - 0.20)

QUESTION ANALYTICS

Q. 14

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 14/16
2/13/2018 MADE EASY ONLINE TEST SERIES

A single phase full bridge voltage source inverter feeds a load as shown in figure below. If the load current is I0 =
540 sin (ωt – 45°)A, the power delivered to the load is _________ kW.

FAQ Have any Doubt ?

72.92 (72.80 - 72.99)

Your answer is Correct72.93

Solution :
72.92 (72.80 - 72.99)

QUESTION ANALYTICS

Q. 15

A 1-Φ inverter is operating with PWM technique to eliminate 5th harmonic content in the output. The 7th harmonic
content in the output is _______ Vs.
FAQ Have any Doubt ?

0.122 (0.01 - 0.20)

Your answer is Correct0.173

Solution :
0.122 (0.01 - 0.20)

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 15/16
2/13/2018 MADE EASY ONLINE TEST SERIES

QUESTION ANALYTICS

Q. 16

An impulse commutated chopper feeds inductive load requiring a constant current of 260 A. The source voltage is
220 V dc and the chopping frequency is 400 Hz. Turn off time for main thyristor is 18 μs. Taking a factor of safety
2 for the main thyristor, the value of commutating component C is ________ μF.
FAQ Have any Doubt ?

42.54 (42.40 - 42.70)

Your answer is Correct42.545

Solution :
42.54 (42.40 - 42.70)

QUESTION ANALYTICS

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=152&t=a&testType=2 16/16