Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Multi-Cyclone Scrubber Centrifugal Separator Brochure

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4
At a glance
Powered by AI
The document discusses centrifugal gas-liquid separators including multi-cyclone scrubbers and swirl tube separators. It describes their operating principles and performance guarantees.

Multi-cyclone scrubbers use centrifugal force to remove solid particles and liquids from gas without moving parts by forcing the gas into a cyclonic flow pattern around the inner wall of multiple small diameter cyclones arranged in parallel.

Swirl tube separators create inertial forces on entrained liquid as gas passes around an inlet helicoid, throwing liquids out of the gas flow against the swirl tube walls for removal.

Peerless TECH SPEC

CENTRIFUGAL SEPARATORS

See what Peerless can do for you.

FOR HIGH EFFICIENCY-SEPARATION OF LIQUID


AND SOLID CONTAMINANTS AT LOW COST

HORIZONTAL OR VERTICAL SWIRL TUBE SEPARATOR


For liquid removal and for small installation
foot-print applications.

MULTI-CYCLONE SCRUBBER
For applications requiring TYPICAL APPLICATIONS:
efficient dust and liquid removal. • Distribution systems
• Mainline transmission stations
• Industrial process applications
• Gas gathering systems
• Petrochemical plants
• Slug catching
– Constant ∆P regardless of loading • Absorption processes
– Maintenance free • Recip compressor protection

– Guaranteed performance
– Built to ASME code and international standards
Multi-Cyclone Scrubbers

HORIZONTAL OR VERTICAL, PEERLESS HAS THE RIGHT


CONFIGURATION TO FIT YOUR APPLICATION.

MULTI-CYCLONE BENEFITS MULTI-CYCLONE PRINCIPLE


• High-efficiency liquid and solid removal OF OPERATION
• A wide range of flows Multi-Cyclone Scrubbers use centrifugal force
• Intermittent flow spikes capacity to effectively remove solid particles and liquids
• Maintenance free from gas without moving parts.
• Fixed or removable cyclone bundles
• 2” or 4” diameter cyclones available (A) Dirty gas enters the Cyclone Tube
tangentially at two locations.
(B) The tube housing forces the gas into a
Two Peerless Multi-Cyclone cyclonic flow pattern. Centrifugal force
Scrubbers installed at a throws solids and liquids against inner
metering station in western cyclone tube wall.
Canada. Typical natural gas (C) Solid and liquid particles drain down the
flow through these 78” cyclone tube walls and collect at bottom.
diameter vessels is 2.5 billion (D) Clean gas flows down and then up through
standard cubic feet per day. the center annulus and exits at the top.

A
A

Peerless uses multiple, small-diameter


cyclones arranged in parallel to achieve
separation of small and large size B
particles. Depending upon the application,
a bank of cyclones my contain as many
as 200. Selection of 2” or 4” diameter
cyclones will depend upon the system gas
flow rate. C

Peerless Cyclone Tube

PERFORMANCE GUARANTEE – MULTI-CYCLONE

Innovative Designs Solids removal efficiencies:


• 100% of 8-micron particles
Liquid removal efficiencies:
• Outlet gas will contain less than 0.10 gallon of
Cost-Effective Retrofits • 99% of 6- to 8-micron particles entrained liquid per million standard cubic feet of gas
• 90% of 4- to 6-micron particles passed through the separator
Guaranteed Performance
• 85% of 2- to 4-micron particles • 100% of all droplets 8-microns in diameter and larger
SWIRL TUBE Separators

USE THE TWO-STAGE PEERLESS EXTRACTION DESIGN TO


MAXIMIZE LIQUID HANDLING.

SWIRL TUBE BENEFITS (B) Liquids are thrown out of the gas flow and
• High-efficiency removal of entrained liquid against walls of the swirl tube
• Maintenance free (C) Liquids fall out of swirl tube at the primary
• Increased liquid handling extraction slots
• No moving parts (D) Minor amounts of gas exiting at the
primary extraction slots are directed back
SWIRL TUBE PRINCIPLE OF OPERATION through the swirl tube through side
Swirl tubes create inertial forces on the openings to repeat the separation process.
entrained liquid as it passes around the inlet (E) Clean gas exits the swirl tube.
A 96” diameter Peerless Swirl
helicoid.
Tube Separator installed in a
(A) Contaminated gas enters the swirl tube
gas gathering system. Typical
where centrifugal forces are imposed on
flow is 3 billion standard
the flow.
cubic feet of gas per day.

D
E

A B
C

SWIRL TUBE SEPARATOR


COST EFFECTIVE RETROFITS Swirl Tubes can be installed in either vertical or horizontal
configurations without affecting the performance of the system.

PERFORMANCE GUARANTEE – SWIRL TUBE


Liquid removal efficiencies:
• Outlet gas will contain less than 0.10 gallon of entrained liquid per million standard cubic feet of gas passed through the separator
• 100% of all droplets 8-microns in diameter and larger

• 99% of 4- to 6-micron droplets

• 98% of 2- to 4-micron droplets


CONSULT PEERLESS FOR YOUR SEPARATION,
RETROFIT, AND SPARES REQUIREMENTS.

PEERLESS MULTI-CYCLONE SCRUBBER


DESIGN FEATURES
Peerless Multi-Cyclone Scrubbers are
constructed to resist many years of abrasive
wear and be rugged enough to withstand a
wide variety of gas stream applications. In
erosive gas applications, the critical parts of
Peerless Cyclone Tubes may be constructed
of erosion-resistant steel alloys.

Peerless Multi-Cyclone Scrubbers require


no maintenance and have a comparatively
low initial cost. Vertical and horizontal
configurations are available.

PEERLESS SWIRL TUBE SEPARATOR


DESIGN FEATURES
SIDE
SideOUTLET
outlet TOP OUTLET
Top outlet
Peerless Swirl Tube Separators provide
superior performance across an array of
applications including condensate removal
from gas streams, entrainment removal
following a distillation or absorption process,
and removal of liquid from inter-stage and
final discharge stages in reciprocating
compressors.

An aerodynamically designed helicoid


maximizes the inertial force utilized to
remove entrained liquids. The two-stage
liquid extraction system with a gas recycle
stream is designed to maximize the liquid
handling requirements of this unique
system. It is the key to high-efficiency, low-
Horizontal flow path cost separation.

Peerless Mfg. Co. Peerless Mfg. Co. Peerless Europe Limited Peerless Manufacturing Canada Ltd.
14651 North Dallas Pkwy. Regional Office Cardinal’s Court, Bradford St. 5329 1A Street SW
Suite 500 35 Jalan Pemimpin, #07-02 Braintree, Essex CM7 9AT Calgary Alberta T2H 0E5
Dallas, TX 75254 Singapore 577176 United Kingdom Canada
Making Energy SAFE, EFFICIENT, AND CLEAN. Phone 214-357-6181 Phone 011-65-6354-2306 Phone 011-44-1376-556030 Phone 403-252-2600
www.peerlessmfg.com
NASDAQ Symbol: PMFG

You might also like