Lenel® Controller Access Hardware

LNL-X2220
Intelligent Dual
Reader Controller

Overview Features & Functionality

The LNL-X2220 Intelligent Dual Reader Controller (IDRC) provides Controller Functionality
a single board solution for interfacing one or two doors to an • DNS device naming through DHCP extended commands
OnGuard® system. In addition, other I/O and reader interface • 6 MB of available on-board, non-volatile flash memory
modules can be added on the controller’s downstream port to
• Battery-backed, non-volatile storage of 50,000 events
expand its capabilities. The LNL-X2220 controller revolutionizes
access control system architecture by allowing Ethernet • Configurable option for Data at Rest encryption
connection directly from an entry location to the OnGuard • Firmware stored in flash memory, background download of
server, while still providing the security, functionality, and firmware updates supported
modularity of Lenel’s proven hardware platform. The LNL-X2220 • Supports up to sixteen badge formats
controller is scalable for any access control application, from • Biometric template storage support for OSDP™ Biometric and
the most basic to the most sophisticated. In the event of legacy Bioscrypt® readers
communication loss, the LNL-X2220 controller allows nearly
• Optional Secondary NIC, USB port (2.0) with optional adapter
all local functionality to continue unimpaired until the server
• Enhanced anti-passback capabilities
connection is restored.
• Up to 32,000 access level permissions
Utilizing its native Ethernet communications and an advanced • Elevator control support for up to 128 floors
32-bit processor, the LNL-X2220 controller can communicate
• Individual extended held open and strike times
upstream to the host computer through its Ethernet port. The
controller can store up to 250,000 cardholders in non-volatile • Two dedicated inputs for tamper and power failure status
flash memory, and supports selective download for larger • Advanced Encryption Standard (AES) 256-bit algorithm for
cardholder databases. The downstream RS-485 two-wire port communications to Lenel Series 3 reader and I/O modules; AES
can be used to connect up to 32 devices (maximum 64 doors). 128 bit encryption to Lenel Series 2 reader and I/O modules
• AES128 or TLS 1.2 (with AES256 support) communication to
Two on-board reader ports support Data1/Data0, Clock/Data,
OnGuard
Supervised and Unsupervised F2F, Biometric readers and the
• RNDIS support enables USB connection to display controller
bi-directional RS-485 Open Supervised Device Protocol (OSDP)
web configuration pages
communications. Each LNL-X2220 controller supports up to
sixteen different card formats. The LNL-X2220 controller includes Reader Interface Functionality
eight inputs that support normally open, normally closed, • Supports Data 1/Data0, Clock/Data, Supervised and Unsupervised
supervised, and unsupervised circuits. In addition, four output F2F and OSDP-compatible RS-485 readers and keypads
relays support fail-safe or fail-secure operation. • Support for OSDP Biometric template transfer and Secure
Channel Encryption
• Door contact supervision (open/closed) and REX push-button
monitor for each door

Lenel.com/access-hardware
LNL-X2220

System Diagram
LNL-X2220
Intelligent System
Controller (ISC) RS-485 Multi-drop
Max 32 Devices up to 4000 ft.
TCP/IP NETWORK

OnGuard® LNL-1300 LNL-1320 LNL-1100 LNL-1200

Security Server Single Reader Dual Reader Input Control Module Output Control Module
Interface Module Interface Module Up to 16 Inputs per Up to 16 Outputs per
LNL-1100 LNL-1200

Motion Sensor Alarm

Option 2.1

Option 2.2

-OR-

Reader Reader Reader

Reader Reader Reader Reader

Specifications The interface is for use in low voltage, Class 2 Circuits only.
The installation of this device must comply with all local fire and electrical codes.
Parts and Spare Parts
Primary Power 12 to 24 VDC ± 10%, 500 mA maximum (reader current not included) Part No. Description
Reader Ports 600 mA maximum (add 600 mA to primary power current)
Primary Host Communication Ethernet: 10-BaseT/100Base-TX 6 MB on-board flash memory
Secondary Host Communication USB port (2.0) with optional adapter: pluggable model USB2-OTGE100 available for cardholder
One each: 2-wire RS-485, 2,400 to 115,200 bps, asynchronous, half-duplex, LNL-X2220 database; 50,000 event
Serial I/O Device battery backed RAM for event
1 start bit, 8 data bits, and 1 stop bit
Eight unsupervised / supervised, standard EOL: 1k/1k ohm, 1% 1/4 watt; two log.
Inputs
unsupervised inputs dedicated for cabinet tamper and UPS fault monitoring USB to Ethernet converter, for
Four relays: Normally open contact (NO): 5 A @ 30 VDC resistive; Normally LNL-X Series Controllers only.
Outputs
closed contact (NC): 3 A @ 30 VDC resistive USB2- Provides optional Secondary
Reader Interface OTGE100 NIC connection. Second NIC
12 VDC ± 10% regulated, 300 mA maximum each reader (input voltage [VIN] should be on different subnet
Power must be greater than 20 VDC) or 12 to 24 VDC ± 10% (input voltage passed than primary NIC.
through), 300 mA maximum each reader
Data Inputs TTL compatible, F/2F or 2-wire RS-485
9,600 to 115,200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and
RS-485 Mode
1 stop bit. Maximum cable length: 2,000 ft. (609.6m)
LED Output TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum
Buzzer Output Open collector, 12 VDC open circuit maximum, 40 mA sink maximum
Cable Requirements
Power and Relays One twisted pair, 18 to 16 AWG
Ethernet CAT-5, minimum
TTL Reader 22 to 16 AWG, depending on length and requirements
Alarm Input One twisted pair, 30 ohms maximum, typically 22 AWG @ 1,000 ft. (304.8m)
One twisted pair with drain wire and shield, 120 ohm impedance, 24 AWG,
RS-485 I/O Device Port
4,000 ft. (1,219m) maximum
One twisted pair with drain wire and shield, 120 ohm impedance, 24 AWG,
RS-485 Reader Port
2,000 ft. (610m) maximum
Mechanical
Dimensions 8.0 W x 6.0 L x 1.0 H in. (203.2 x 152.4 x 25mm)
LenelS2.com
Weight 9.0 oz. (255g) nominal, board only
Environmental (866) 788-5095
-55° to +85° C, storage
Temperature Specifications subject to change without notice.
0° to +70° C, operating
Humidity 5 to 95% RHNC ©2018 United Technologies Corporation. All rights reserved.
at 12 VDC, 20.5 BTU/hr All trademarks are the property of their respective
Heat Output (BTUs) owners. LenelS2 is a part of UTC Climate, Controls &
at 24 VDC, 22.9 BTU/hr
Security, a unit of United Technologies Corporation.
FCC Part 15, CE, RoHS, UL 294, UL 1076, CAN/ULC 60839-11-1:2016, CSA
Approvals
C22.2 No. 205-1983, cUL/ORD-C1076 2018/11 (GSP-2716)