Professional Documents
Culture Documents
Nitobond EP2
Nitobond EP2
Uses Specification
For bonding fresh wet cementitious materials to existing Epoxy bonding agent
cementitious surfaces. For use on horizontal surfaces or on
The bonding agent shall be Nitobond EP, a two-component
vertical surfaces where mortar or concrete can be supported
solvent-free epoxy resin. The two components shall be
by formwork. The long ‘open’ life makes it suitable for use
differentially pigmented in order to ensure visually that correct
with formwork or where additional steel reinforcement has to
mixing has taken place prior to the application.
be fitted. The product is ideal for roads, bridges, pavements,
loading bays and factories, and for bonded or granolithic floor
Properties
toppings. Nitobond EP is equally suited to internal and external
Test method Typical result
applications.
Compressive strength : 70 N/mm2
Advantages (ASTM D695)
Tensile strength : 30 N/mm2
Nitobond EP may also be used as part of a repair system (ASTM D638)
where a substrate/repair barrier is required or where the Slant Shear Strength : 36 N/mm²
substrate is likely to remain permanently damp or wet. (BS 6319, Part 4)
Can be applied on to dry or damp substrates Water Absorption : 0.05%
(ASTM D570)
Exhibits high mechanical strength
Nitobond EP - Page 2 of 4
Fosroc Nitobond EP
Estimating Precautions
Flash points
Limitations Fosroc Solvent 102 : 33ºC
- Nitobond EP should not be applied when the temperature For further information, refer to the Product Material Safety
is below 5ºC or is 5ºC and falling. If any doubts arise Data Sheet.
concerning temperature or substrate conditions, consult
the local Fosroc office.
Nitobond EP - Page 3 of 4
Fosroc Nitobond EP
Additional Information
fluid micro-concretes
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for
the Supply of Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility to
obtain the latest version.
Head Office
telephone: +254 709 106 000 email: enquiry.kenya@fosroc.com
Fosroc Kenya Ltd
Po Box 78527-00507,
Mombasa rd near Syokimau
Railway Station, Nairobi
www.fosroc.com