Flow-Tek Part Number Selection Guide

Threaded Valves Part Numbers FTUS18020100
PART NUMBER - VALVE SELECTION

Ball/ Service Ball Special
Series Size - Base Code Body Seats Seals - -
Stem Mod Mod Features
16 0200 - 11005 S S R R - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
Example: 160200-11005SSRR-NN = 2" S85, Stainless Steel Body, Stainless Steel Ball and Stem, RPTFE Seats, RPTFE Seals
1 Series 16 Threaded Valves Website Link
0025 1/4" 0100 1" 0250 2-1/2"

0038 3/8" 0125 1-1/4" 0300 3"
2 Size*
0050 1/2" 0150 1-1/2" 0400 4"
0075 3/4" 0200 2"
- -
11A18 S20 & S20FS Link to Brochure 11003 S70 & S90 Link to Brochure
Base Code 11A00 S40 Link to Brochure 11A01 S51 Link to Brochure
3 (Model) 11A04 S80 Link to Brochure 11034 HP6000 Link to Brochure
11005 S85 Link to Brochure 11033 HX10000 Link to Brochure
S 316 Stainless Steel

4 Body C WCB Carbon Steel (S90 Only)
B Brass (S51 Only)
S 316 Stainless Steel Ball with 316 Stainless Steel Stem

5 Ball & Stem
B Brass (Chrome Plated) Ball with Brass Stem (S51 Only)
R RPTFE V PVDF (HP6000 Only)

6 Seats
T PTFE (S51 Only) P PEEK (HP10000 Only)
R RPTFE T PTFE (S51 Only)

7 Seals
G Graphite (S20FS Only)
- -
Service N None M Bare Stem - Actuator Capable (HP6000 & HX10000)
8 Modification C General Cleaning (S85 Only)
Ball N None
9 Modification H Vented Ball (S85 Only)
- -
Special
10 Features Consult Factory
(Optional)
NOTES:
S20, S20FS, S40, S80, S85, S70, S90, S82 Model Valves come standard with Lockable Lever
S51 Model comes with standard with a Lever
HP6000 and HX10000 Models are offered with a Lever or Bare Stem for the actuator capable version
Oval Handle available for some models, see Specialty Products Section
* Not all Sizes or Materials are available in all Models, consult factory or see price pages for offerings in each model
8323 N. Eldridge Pkwy. #100 www.bray.com/sales-terms-and-conditions Phone 832-912-2300

Houston, TX 77041 www.flow-tek.com Fax 832-912-2301
5000-6000 -3Pcs- Part No FTUS18020100

14 0100 - 11A00 S S R T - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
Example: 140100-11A00SSRT-NN = 1" 5000 with NPT (Threaded Ends), Stainless Steel Body, Stainless Steel Ball and Stem, RPTFE Seats, PTFE Seals.
1 Series 14 5000 / 6000 Model - 3 Piece Valves Website Link Brochure Link O&M Link
0025 1/4" 0100 1" 0250 2-1/2"

0038 3/8" 0125 1-1/4" 0300 3"
2 Size*
0050 1/2" 0150 1-1/2" 0400 4"
0075 3/4" 0200 2"
- -
Base Code 11A00 Model 5000/6000 w/ NPT Ends 11A13 Model 5000/6000 w/ NPT x SW Ends
3 Model/Ends Model 5000/6000 w/ SW Ends
11A01
S 316 Stainless Steel (5000)

4 Body
WCB Carbon Steel (6000)
C
5 Ball & Stem S 316 Stainless Steel Ball with 316 Stainless Steel Stem
6 Seats R RPTFE
7 Seals T PTFE
- -
Service
8 Modification
N None
Ball
9 Modification
N None
- -
Special
10 Features Not Available in this Model
(Optional)
NOTES:
Stainless Steel Socketweld End Caps are made of CF3M (316L) material
Stainless Steel Welded Ends are made of 316L - ASTM A351 Gr CF3M
5000/6000 Series valves come standard with a Lockable Lever

Micro Pure -3Pcs- Part No FTUS18020100
Page 3

14 0100 - 11003 L L T T - C N - 0001
1 2 - 3 4 5 6 7 - 8 9 - 10
Example: 140100-11003LLTT-CN-0001 = 1" S7500 with Tri-Clamp Ends, SS Body, Ball and Stem, PTFE Seats, PTFE Seals, General Cleaned, PTFE Cavity Fillers
1 Series 14 Micro Pure 3 Piece Valves Website Link Brochure Link O&M Link
0500 1/2" 0150 1-1/2" 0300 3"

2 Size* 0075 3/4" 0200 2" 0400 4"
0100 1" 0250 2-1/2"
- -
Base Code 11003 Model S7500 (Clamp Ends) 11062 Model S75/700 (Clamp End x Tube End)
3 (Model) 11004 Model S7700 (Tube Ends)
4 Body L 316L (CF3M) Stainless Steel
5 Ball & Stem L 316L Stainless Steel Ball w/ 316 Stainless Steel Stem
J TFM 1600
6 Seats T PTFE
U UHMWPE
J TFM 1600
7 Seals T PTFE
U UHMWPE
- -
Service
8 Modification
C General Cleaned X Oxygen Cleaned
Ball
9 Modification
N None H Vented Ball (Upstream)
- -
Special 0001 Cavity Fillers 0031 Polished 10-15 Ra 0055 Special Trust Washer Material
10 Features 0210 Polished 8-12 Ra ???? Consult Factory
(Optional)
NOTES:
S7500/S7700 Series valves come standard with a Lockable Lever
S7500/S7700 Series valves come standard with Internal Surface Finish of 15-20 Ra Maximum Per SFV-1
General Cleaning per Flow-Tek WI-125 (solvent method) & Bagged meets ASME BPE-2002A

7000-8000 Model -3Pcs- Part No FTUS18020100

14 0200 - 11001 S S R R - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
Example: 140200-11001SSRR-NN = 2" 7000 with SW (Socketweld Ends), Stainless Steel Body, Stainless Steel Ball and Stem, RPTFE Seats, RPTFE Seals
7000 Model DM7000

1 Series 14 3 Piece Valves
8000 Model
Website Link Brochure
DM8000
Website Link Brochure
0025 1/4" 0100 1" 0250 2-1/2"

0038 3/8" 0125 1-1/4" 0300 3"
2 Size*
0050 1/2" 0150 1-1/2" 0400 4"
0075 3/4" 0200 2" 0600 6"
- -
11000 Model 7000/8000 w/ NPT Ends 110M0 Model DM7000/DM8000 w/ NPT Ends
11001 Model 7000/8000 w/ SW Ends 110M1 Model DM7000/DM8000 w/ SW Ends
11002 Model 7000/8000 w/ BW Ends 110M2 Model DM7000/DM8000 w/ BW Ends (Sch40)
Base Code
3 (Model)
11023 Model 7000/8000 w/ Extended SW Ends 110M3 Model DM7000/DM8000 w/ Ext SW Ends
11024 Model 7000/8000 w/ Extended BW Ends (Sch40) 110M4 Model DM7000/DM8000 w/ Ext BW Ends (Sch40)
11013 Model 7000/8000 w/ NPT x SW Ends 110M7 Model DM7000/DM8000 w/ ANSI 150 Flanged Ends
11017 Model 7000/8000 w/ ANSI 150 Flanged Ends 110?? Special End Connection Combinations
S 316 Stainless Steel (7000 & DM7000) A Alloy 20

4 Body
C WCB Carbon Steel (8000 and DM8000)
5 Ball & Stem S 316 Stainless Steel Ball with 316 Stainless Steel Stem A Alloy 20 Ball and Alloy 20 Stem
R RPTFE U UHMWPE
6 Seats J TFM 1600 T PTFE
K Tek-Fil
R RPTFE U UHMWPE
7 Seals
J TFM 1600 T PTFE
- -
Service N None X Oxygen Cleaning
8 Modification C General Cleaning
Ball N None
9 Modification H Vented Ball
- -
10 Features 0009 Polished to 30-35 Ra 0210 Polished 8-12 Ra ???? Consult Factory
(Optional) 0032 Polished to 20-25 Ra
NOTES:
7000 & 8000 Model Valves come standard with a Lockable Lever. DM7000 & DM8000 come bare stem.
*Direct Mount Valves (DM7000/DM8000) are only Available in 1/2" - 2" Size Range. See Price Pages for sizes and End Connections
Special End Connections like other Schedule BW end caps are available on request - Consult Factory
Not all End Connections are available in all sizes - See price pages
Special Materials of Construction are available on request.

Chlorine 8000 - Part No FTUS18020100

14 0100 - 11000 C H R R - C H
1 2 - 3 4 5 6 7 - 8 9 - 10
Example:140100-11000CHRR-CH = 1" 8000 with NPT Ends, Carbon Steel Body, Hastelloy C Ball and Stem, RPTFE Seats, RPTFE Seals, General Cleaned, Vented Ball
1 Series 14 Chlorine Service Model 8000 - 3 Piece Valves Technical Bulletin - TB1007 Chlorine Service Ball Valves
0025 1/4" 0100 1" 0250 2-1/2"

0038 3/8" 0150 1-1/2" 0300 3"
2 Size
0050 1/2" 0200 2" 0400 4"
0075 3/4"
- -
Base Code 11000 Model 8000 w/ NPT Ends 11013 Model 8000 w/ NPT x SW Ends
3 (Model) Model 8000 w/ SW Ends Special End Connection Combinations
11001 110??
4 Body C WCB Carbon Steel (8000)
5 Ball & Stem H Hastelloy C Ball and Stem M Monel Ball and Stem
6 Seats R RPTFE J TFM 1600
7 Seals R RPTFE J TFM 1600
- -
Service
8 Modification
Ball
9 Modification
H Vented Ball
- -
NOTES:
8000 Series Valves come standard with Lockable Lever
Consult Factory for Other End Connection Options
Designed to comply with recommendations from the Chlorine Institute Pamphlet 6, Piping Systems for Dry Chlorine

Tank Bottom TK7000 - Part No FTUS18020100

14 0200 - 11026 S S R R - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
Example:140200-11026SSRR-NN = 2" TK7000 with Tank Bottom x ANSI 150 Flanged Ends, Stainless Steel Body, Ball and Stem, RPTFE Seats, RPTFE Seals.
1 Series 14 Tank Bottom Model TK7000 - 3 Piece Valves Website Link Brochure Link
0100 1" 0200 2" 0400 4"

2 Size*
0150 1-1/2" 0300 3"
- -
Base Code 11005 Model TK7000 w/ Tank Bottom x NPT End 11007 Model TK7000 w/ Tank Bottom x BW End (Sch 40)
3 (Model) Model TK7000 w/ Tank Bottom x SW End Model TK7000 w/ Tank Bottom x ANSI 150 Flanged
11006 11026
4 Body S 316 Stainless Steel
5 Ball & Stem S 316 Stainless Steel Ball and Stem
R RPTFE K Tek-Fil
6 Seats
TFM 1600 UHMWPE
J U
J TFM 1600
7 Seals R RPTFE
UHMWPE
U
- -
Service C General Cleaned
8 Modification
N None
Oxygen Cleaned
X
Ball
9 Modification
N None H Vented Ball
- -
NOTES:
TK7000 Model Valves come standard with Lockable Lever

Triad Series - 3Piece - Part No FTUS18020100

18 0075 - 11010 S S J G - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
Example:180075-11010SSJG-NN = 3/4" FP Triad (Full Port), NPT Ends, Stainless Steel Body, Ball and Stem, TFM 1600 Seats, Graphite Seals.
1 Series 18 Triad Series - 3 Piece Valves Website Link Brochure Link O&M Manual
0025 1/4" 0100 1" 0250 2-1/2" (SP Triad Only)

0038 3/8" 0125 1-1/4" 0300 3"
2 Size**
0050 1/2" 0150 1-1/2" 0400 4"
0075 3/4" 0200 2"
- -
11010 FP Triad - Full Port w/ NPT Ends 11084 FP Triad - Full Port w/ NPT x SW Ends
Base Code 11011 FP Triad - Full Port w/ SW Ends 11094 FP Triad - Full Port w/ NPT x Ext BW (Sch80) Ends
11081 FP Triad - Full Port w/ Ext SW Ends 11007 FP Triad - Full Port w/ SW x 600# Flanged Ends
(Model
3 &
11047 FP Triad - Full Port w/ Ext BW (Sch80) Ends 11095 FP Triad - Full Port w/ BW (Sch80)
End 11022 FP Triad - Full Port w/ ANSI 600 RF Flanged Ends 11077 FP Triad - Full Port w/ BW (Sch40) (NonStandard)
Connection) 11008 SP Triad - Standard Port w/ NPT Ends 11063 SP Triad - Standard Port w/ NPT x SW Ends
11009 SP Triad - Standard Port w/ SW Ends 110?? Other End Combinations Available - Consult Factory

4 Body
WCB Carbon Steel
C
5 Ball & Stem S 316 Stainless Steel Ball with 316 Stainless Steel Stem D 316 Stainless Steel Ball with 17-4 SS Stem
J TFM 1600 U UHMWPE

6 Seats K Tek-Fil P PEEK*
R RPTFE T PTFE
G Graphite U UHMWPE
7 Seals R RPTFE K Tek-Fil
J TFM 1600 T PTFE
- -
8 Modification NACE MRO 175 2003 (Upgraded Bolting)
C General Cleaning M
Ball N None
- -
NOTES:
Triad Model Valves come standard with a Lockable Lever.
Special End Connection combinations not listed above are available, please consult factory for Part Number and Price
*17-4 SS Stem Required with PEEK Seats
**Not all Size are available in Full Port or Standard Port - See price Pages for size offerings

Triad HP Series -3Pcs- Part No FTUS18020100

18 0075 - 11010 S S J G - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
Example:180075-110C1SDPG-NN = 3/4" HP Triad (Standard Port), NPT Ends, Stainless Steel Body, Ball and 17-4PH Stainless Steel Stem, PEEK Seats, Graphite Seals.
1 Series 18 Triad HP Series - 3 Piece Valves (High Pressure) Website Link Brochure O&M Link
0025 1/4" (Full Port Only) 0100 1" (Standard Port Only)
0038 3/8" (Full Port Only) 0125 1-1/4" (Standard Port Only)
2 Size*
0050 1/2" (Full Port Only) 0150 1-1/2" (Standard Port Only)
0075 3/4" (Standard Port Only) 0200 2" (Standard Port Only)
- -
110C1 HP Triad - Standard Port w/ NPT Ends
Base Code
110C2 HP Triad - Standard Port w/ SW Ends
3 (Model & 110G3 HP Triad - Standard Port w/ NPT x SW Ends
End 110G7 HP Triad - Standard Port w/ NPT x Ext SW Ends
Connection)
110?? Other End Combinations Available - Consult Factory

4 Body
WCB Carbon Steel
C
5 Ball & Stem D 316 Stainless Steel Ball with 17-4 SS Stem
6 Seats P PEEK
7 Seals G Graphite
- -
Ball N None
- -
Special 0009 Polished to 30-35 Ra 0031 Polished 10-15 Ra 0055 Special Trust Washer Material
(Optional)
NOTES:
Triad HP Model Valves come standard with a Lockable Lever.

Flanged Series Part No FTUS18020100

15 0400 - 11002 S S J G - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
Example:150400-11002SSJG-NN = 4" F30, Full Port, ANSI 300 RF Flanged Ends, Stainless Steel Body, Ball and Stem, TFM 1600 Seats, Graphite Seals.
1 Series 15 Flanged Series - Floating Ball Valves Website Link
0050 1/2" (Full Port Only) 0200 2" 0600 6"

0075 3/4" (Full Port Only) 0250 2-1/2" (Full Port Only) 0800 8"
2 Size
0100 1" 0300 3" 1000 10"
0150 1-1/2" 0400 4" 1200 12"
- -
11000 F15 - Full Port - ANSI 150 RF Flanged Ends 11001 RF15 - Standard Port - ANSI 150 RF Flanged Ends
Base Code
3 (Model)
F15 / F30 Website Link F15 / F30 Brochure RF15 / RF30 Website Link RF15 / RF30 Brochure
S 316 Stainless Steel A Alloy 20

4 Body
C WCB Carbon Steel ? Special Materials (Consult Factory)
D 316 Stainless Steel Ball with 17-4 SS Stem

A Alloy 20 Ball and Alloy 20 Stem
J TFM 1600 U UHMWPE

6 Seats K Tek-Fil P PEEK*
R RPTFE T PTFE
G Graphite U UHMWPE
J TFM 1600 T PTFE
- -
8 Modification C General Cleaning M NACE MRO 175 2003 (Upgraded Bolting - F15/F30)
Ball
9 Modification
N None H Vented Ball
- -
NOTES:
15 Series Valves come standard with a Lockable Lever. Recommended to add a Gear Operator for 6" Full Port and up.
Not all sizes are available in Standard Port (RF15/RF30) Models - See price pages
*17-4 Stem is Required when using PEEK seats
Stainless Steel Spiral Wound Graphite Body Seal is standard on F15/F30 unless otherwise requested.
Flat Face Flanged Ends or RTJ Flanged Ends are available on request.
Cavity Fillers only Available in F15 and F30 Models

Flanged Metal Seated - Part No FTUS18020100

15 0400 - 11000 S 6 6 G - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
Example:150400-11000S66G-NN = 4" F15, Full Port, ANSI 150 RF Flanged Ends, Stainless Steel Body, Stainless Ball w/ HVOF Chrome Carbide coating,
660 Stainless Stem, Stainless Steel with HVOF Chrome Carbide coated Seats, Graphite Seals.
1 Series 15 Flanged Metal Seated - Floating Ball Valves Website Link Brochure O&M Technical Bulletin TB1010
0050 1/2" 0200 2"

0075 3/4" 0300 3"
2 Size
0100 1" 0400 4"
0150 1-1/2" 0600 6"
- -
Base Code 11000 F15 - Full Port - ANSI 150 RF Flanged Ends
3 (Model) 11002 F30 - Full Port - ANSI 300 RF Flanged Ends

4 Body
C WCB Carbon Steel
6 A351-CF8M w/ HVOF Chrome Carbide & 660 Stainless Steel Stem

5 Ball & Stem
5 A351-CF8M w/ HVOF Chrome Carbide & 17-4PH (ASTM A564 Type 630) Stem (Temperature Limitation of 650°F)
6 Seats 6 A351-CF8M w/ Chrome Carbide
7 Seals G Graphite
- -
Service
8 Modification
N None M NACE MRO 175 2003 (Upgraded Bolting)
Ball
9 Modification
N None
- -
Special
10 Features ???? Consult Factory
(Optional)
NOTES:
15 Series Valves come standard with a Lockable Lever. Recommended to add a Gear Operator for 3", 4" and 6".
FCI 70-2 Class IV is standard shutoff. Consult Factory for price adder on Class V or Class VI shutoff
Metal Seated F15 and F30 model valves are Unidirectional Only

Chlorine Flanged - Part No FTUS18020100

15 0300 - 11000 C H J R - C H
1 2 - 3 4 5 6 7 - 8 9 - 10
Example:150300-11000CHJR-CH = 3" F15, Full Port, ANSI 150 RF Flanged Ends, Carbon Steel Body, Hastelloy Ball and Stem, TFM 1600 Seats, RPTFE Seals, Cleaned, Vented
1 Series 15 Chlorine Trim Flanged - Floating Ball Valves Technical Bulletin - TB1007 Chlorine Service Ball Valves
0050 1/2" 0200 2"

0075 3/4" 0300 3"
2 Size*
0100 1" 0400 4"
0150 1-1/2" 0600 6"
- -
Base Code 11000 F15 - Full Port - ANSI 150 RF Flanged Ends 11001 RF15 - Standard Port - ANSI 150 RF Flanged Ends
3 (Model) 11002 F30 - Full Port - ANSI 300 RF Flanged Ends 11021 RF30 - Standard Port - ANSI 300 RF Flanged Ends
4 Body C WCB Carbon Steel
5 Ball & Stem H Hastelloy Ball and Stem M Monel Ball and Stem
6 Seats J TFM 1600
7 Seals R RPTFE G Graphite*
- -
Service
8 Modification
C General Cleaned
Ball
9 Modification
H Upstream Vented Ball
- -
Special
(Optional)
NOTES:
Other Seat Materials are available on request
All Chlorine Service valves have upstream vented ball and are cleaned and bagged to Flow-Tek WI-125
F15 / F30 Body seals will be RPTFE unless specified otherwise.
For Monel Ball and Stem consult factory for special pricing and delivery.
*For Fire Safe design, special ordered to have a Monel Spiral Wound Graphite body seal on the F15/F30 Model
Designed to comply with recommendations from the Chlorine Institute Pamphlet 6, Piping Systems for Dry Chlorine

TKF15 Tank-Flanged - Part No FTUS18020100

15 0600 - 11019 S S J R - N N
1 2 - 3 4 5 6 7 - 8 9 - 10
Example:150600-11019SSJR-NN = 6" TKF15, Full Port, ANSI 150 RF Flanged End x Tank Bottom Buttweld End, Stainless Steel Body, Ball and Stem, TFM 1600 Seats, RPTFE Seals.
1 Series 15 Flanged Metal Seated - Floating Ball Valves Website Link Brochure
0250 2-1/2" 0800 8"

0300 3" 1000 10"
2 Size*
0400 4" 1200 12"
0600 6"
- -
Base Code
3 (Model)
11019 TKF15 - Full Port - ANSI 150 RF Flanged End x Tank
4 Body S 316 Stainless Steel
5 Ball & Stem S 316 Stainless Steel Ball and Stem D 316 Stainless Steel Ball and 17-4PH Stem
J TFM 1600 R RPTFE

6 Seats
K Tek-Fil P PEEK
7 Seals R RPTFE G Graphite
- -
Service
8 Modification
N None
Ball
9 Modification
N None
- -
Special
(Optional)
NOTES:
15 Series Valves come standard with a Lockable Lever.
Recommended to add a Gear Operator for 6" Full Port and up.
Other Seat Materials are available on request
See Flanged end Section for Optional Special Features
Consult Factory for TKF30 (300# flanged end version)
6"-12"

Multiport - Part No FTUS18020100

Ball/ Service Ball
Series Size - Base Code Body Seats Seals - - Flow Plan
Stem Mod Mod
17 0200 - 11A02 S S J J - N D - 0021
1 2 - 3 4 5 6 7 - 8 9 - 10
Example:170200-11A02SSJJ-ND-0021 = 2" MPF150, ANSI 150 RF Flanged Ends, Stainless Steel Body, Ball and Stem, TFM 1600 Seats and Seals, Flow Pattern F.
1 Series 17 Multiport Series Website Link Brochure O&M 3HP Website 3HP Brochure
0025 1/4" 0100 1" 0250 2-1/2" 0800 8" (MPF150 Only)
0038 3/8" 0125 1-1/4" 0300 3" 1000 10" Standard Port (MPF150)
2 Size*
0050 1/2" 0150 1-1/2" 0400 4" Special Order
0075 3/4" 0200 2" 0600 6"
- -
11A17 MPT-230 - 3 Way - NPT Ends - Full Port 11A20 MPT-240 - 4 Way - NPT Ends - Full Port
11A25 MPC-230 - 3 Way - Clamp Ends - Full Port 11A28 MPC-240 - 4 Way - Clamp Ends - Full Port
Base Code
11A44 MPB-230 - 3 Way - Butt Weld (Sch 40) - Full Port 11A45 MPB-240 - 4 Way - Butt Weld (Sch 40) - Full Port
(Model 11A42 MPS-230 - 3 Way - SocketWeld - Full Port 11A43 MPS-240 - 4 Way - SocketWeld - Full Port
3 & MPF-150 - 4 Way - ANSI 150 RF Flanged - Full Port
11A02 MPF-150 - 3 Way - ANSI 150 RF Flanged - Full Port 11A32
End
11A03 MPF-300 - 3 Way - ANSI 300 RF Flanged - Full Port 11A12 MPF-300 - 4 Way - ANSI 300 RF Flanged - Full Port
Connection)
11A01 MPT-130 - 3 Way - NPT Ends - Standard Port 11005 3HP - 3 Way - NPT Ends - Standard Port (L Port)
11A07 MPC-130 - 3 Way - Clamp Ends - Standard Port 11A?? MPx-2#0 - Special End Connection Combinations
S 316 Stainless Steel ? Special Materials

4 Body
WCB Carbon Steel
C
J TFM 1600 U UHMWPE

6 Seats
K Tek-Fil T PTFE
J TFM 1600 U UHMWPE

7 Seals
K Tek-Fil T PTFE
- -
Service
8 Modification
N None C General Cleaned
Ball A L-Port M LL Port (4 Way Only)

9 Modification Straight Port (4 Way Only)
D T-Port O
- -
0017 L Port - 3 Way - Flow Plan "A" 0027 LL Port - 4 Way - Flow Plan "M"
0018 L Port - 3 Way - Flow Plan "B" 0028 L Port - 4 Way - Flow Plan "N"
0019 T Port - 3 Way - Flow Plan "D" 0029 Straight Port - 4 Way - Flow Plan "O"
Flow Plan
0020 T Port - 3 Way - Flow Plan "E" 0030 T Port - 4 Way - Flow Plan "P"
&
0021 T Port - 3 Way - Flow Plan "F" 0034 L Port - 3 Way - Flow Plan "A" - w/ Cavity Fillers
10 Special
0022 T Port - 3 Way - Flow Plan "G" 0037 T Port - 3 Way - Flow Plan "D" - w/ Cavity Fillers
Features
0023 T Port - 3 Way - Flow Plan "H" 0039 T Port - 3 Way - Flow Plan "F" - w/ Cavity Fillers
(Optional)
0024 T Port - 3 Way - Flow Plan "I" 0044 LL Port - 4 Way - Flow Plan "M" - w/ Cavity Fillers
0025 T Port - 3 Way - Flow Plan "J" 0144 L Port - 3 Way - Flow Plan "A" - w/ Antistatic Grounding
0026 T Port - 3 Way - Flow Plan "K" ???? Special Modification not listed (Consult Factory)
NOTES:
Multiport Series Valves come standard with a Lockable Lever.
Not all Sizes or all End Connections are available in all Models - See price pages
Special Materials of Construction are available on request. (minimum order quantities may apply)
MPT-130 and MPC-130 are only offered with TFM Seats & Seals.
Inventory Lookup - for L-Port first search part number ending in NA-0017, for T-Port search part number ending in ND-0019

V Port - 7000-8000-3Pcs-Part No FTUS18020100

14 0100 - 11001 S S K R - N B
1 2 - 3 4 5 6 7 - 8 9 - 10
Example: 140100-11001SSKR-NB = 1" 7000 with SW (Socketweld Ends), Stainless Steel Body, Stainless Steel Ball and Stem, Tek-Fil Seats, RPTFE Seals, 60° V-Port Ball.
1 Series 14 V-Port - 3 Piece Valves V Control Brochure Technical Bulletin TB1006 - V Control Selection
0025 1/4" 0100 1" 0250 2-1/2"

0038 3/8" 0125 1-1/4" 0300 3"
2 Size*
0050 1/2" 0150 1-1/2" 0400 4"
0075 3/4" 0200 2" 0600 6"
- -
11000 Model 7000/8000 w/ NPT Ends 110M0 Model DM7000/DM8000 w/ NPT Ends
11001 Model 7000/8000 w/ SW Ends 110M1 Model DM7000/DM8000 w/ SW Ends
11002 Model 7000/8000 w/ BW Ends 110M2 Model DM7000/DM8000 w/ BW Ends (Sch40)
Base Code
3 (Model)
11023 Model 7000/8000 w/ Extended SW Ends 110M3 Model DM7000/DM8000 w/ Ext SW Ends
11024 Model 7000/8000 w/ Extended BW Ends (Sch40) 110M4 Model DM7000/DM8000 w/ Ext BW Ends (Sch40)
11013 Model 7000/8000 w/ NPT x SW Ends 110M7 Model DM7000/DM8000 w/ ANSI 150 Flanged Ends
11017 Model 7000/8000 w/ ANSI 150 Flanged Ends 110?? Special End Connections or Combinations
4 Body S 316 Stainless Steel (7000 & DM7000) C WCB Carbon Steel (8000 and DM8000)
6 Seats K Tek-Fil
7 Seals R RPTFE
- -
J 15° V-Port F 90° V-Port G 75° V-Port

Ball
9 Modification
A 30° V-Port E 120° V-Port C Custom Cut (Requires -???? Special Feature)
B 60° V-Port P 45° V-Port D Slotted Cut (Requires -???? Special Feature)
- -
0001 Cavity Fillers 0009 Polished to 30-35 Ra 0055 Special Trust Washer Material
Special
0005 Slotted = 1/16" 0032 Polished to 20-25 Ra 0088 Upstream Vented w/ V-Port
10 Features
0006 Slotted = 1/32" 0031 Polished 10-15 Ra ???? Custom Cut - ##° to Full or ##° at ##%
(Optional)
0117 Slotted = 1/8" 0210 Polished 8-12 Ra ???? Consult Factory
NOTES:
7000 & 8000 Model Valves come standard with a Lockable Lever. DM7000 & DM8000 come bare stem.
Direct Mount Valves (DM7000/DM8000) are only Available in 1/2" - 2" Size Range. See Price Pages
Special Materials of Construction or Special V Port Angles are available on request.
Other Seat materials are available, consult factory for media and application compatibility.

V Port - MicroPure-3Pcs-Part No FTUS18020100

14 0050 - 11003 L L T T - C J
1 2 - 3 4 5 6 7 - 8 9 - 10
Example: 140050-11003LLTT-CJ-0001 = 1/2" S75000 with Tri-Clamp Ends, SS Body, Ball and Stem, PTFE Seats, PTFE Seals, General Cleaned, 15° V-Port
1 Series 14 Micro Pure 3 Piece Valves Website Link Technical Bulletin TB1006 - V Control Selection
0500 1/2" 0150 1-1/2" 0300 3"

2 Size* 0075 3/4" 0200 2" 0400 4"
0100 1" 0250 2-1/2"
- -
Base Code 11003 Model S7500 (Clamp Ends) 11062 Model S75/700 (Clamp End x Tube End)
3 (Model) Model S7700 (Tube Ends)
11004
4 Body L 316L (CF3M) Stainless Steel
5 Ball & Stem L 316L Stainless Steel Ball w/ 316 Stainless Steel Stem
J TFM 1600
6 Seats T PTFE
UHMWPE
U
J TFM 1600
7 Seals T PTFE
UHMWPE
U
- -
Service
8 Modification

Ball
9 Modification
- -
0001 Cavity Fillers 0055 Special Trust Washer Material
Special
0005 Slotted = 1/16" 0088 Upstream Vented w/ V-Port
10 Features
(Optional)
NOTES:
S7500/S7700 Series valves come standard with a Lockable Lever
S7500/S7700 Series valves come standard with Internal Surface Finish of 15-20 Ra Maximum Per SFV-1
Due to softer seat material used in this valve series it is not recommended to control below 30% open with PTFE or TFM seats

V Port - Triad -3Pcs - Part No FTUS18020100

18 100 - 11022 S S K G - N B
1 2 - 3 4 5 6 7 - 8 9 - 10
Example:180100-11022SSKG-NB = 1" FP Triad (Full Port), 600# Flanged Ends, Stainless Steel Body, Ball and Stem, Tek-Fil Seats, Graphite Seals, 60° V-Port
1 Series 18 Triad Series - 3 Piece Valves V Control Brochure Technical Bulletin TB1006 - V Control Selection
0025 1/4" 0100 1" 0250 2-1/2" (SP Triad Only)

0038 3/8" 0125 1-1/4" 0300 3"
2 Size**
0050 1/2" 0150 1-1/2" 0400 4"
0075 3/4" 0200 2"
- -
11010 FP Triad - Full Port w/ NPT Ends 11084 FP Triad - Full Port w/ NPT x SW Ends
Base Code 11011 FP Triad - Full Port w/ SW Ends 11094 FP Triad - Full Port w/ NPT x Ext BW (Sch80) Ends
11081 FP Triad - Full Port w/ Ext SW Ends 11007 FP Triad - Full Port w/ SW x 600# Flanged Ends
(Model
3 &
11047 FP Triad - Full Port w/ Ext BW (Sch80) Ends 11095 FP Triad - Full Port w/ BW (Sch80)
End 11022 FP Triad - Full Port w/ ANSI 600 RF Flanged Ends 11077 FP Triad - Full Port w/ BW (Sch40) (NonStandard)
Connection) 11008 SP Triad - Standard Port w/ NPT Ends 11063 SP Triad - Standard Port w/ NPT x SW Ends
11009 SP Triad - Standard Port w/ SW Ends 110?? Other End Combinations Available - Consult Factory

4 Body
C WCB Carbon Steel
U UHMWPE
6 Seats K Tek-Fil
P PEEK*
G Graphite U UHMWPE
J TFM 1600 T PTFE
- -
8 Modification C General Cleaning M NACE MRO 175 2003 (Upgraded Bolting)

Ball
9 Modification
- -
Special
10 Features
(Optional)
NOTES:
Triad Model Valves come standard with a Lockable Lever.
Special End Connection or end combinations not listed above are available, please consult factory for Part Number and Price
**Not all Size are available in Full Port or Standard Port - See price Pages for size offerings
*17-4 SS Stem Required with PEEK Seats

V Port -Flanged Series- Part No FTUS18020100

15 0600 - 11000 S S K R - N A
1 2 - 3 4 5 6 7 - 8 9 - 10
Example:150600-11000SSKR-NA = 6" F15, Full Port, ANSI 150 RF Flanged Ends, Stainless Steel Body, Ball and Stem, Tek-Fil Seats, RPTFE Seals, 30° V-Port
1 Series 15 Flanged Series - Floating Ball Valves V Control Brochure Technical Bulletin TB1006 - V Control Selection
0050 1/2" (Full Port Only) 0200 2" 0600 6"

0075 3/4" (Full Port Only) 0250 2-1/2" (Full Port Only) 0800 8"
2 Size
0100 1" 0300 3" 1000 10"
0150 1-1/2" 0400 4" 1200 12"
- -
Base Code
3 (Model)
F15 / F30 Website Link F15 / F30 Brochure RF15 / RF30 Website Link RF15 / RF30 Brochure

4 Body
C WCB Carbon Steel ? Special Materials (Consult Factory)
U UHMWPE
6 Seats K Tek-Fil
P PEEK*
G Graphite U UHMWPE
J TFM 1600 T PTFE
- -
8 Modification C General Cleaning M NACE MRO 175 2003 (Upgraded Bolting - F15/F30)

Ball
9 Modification
- -
Special
10 Features
(Optional)
NOTES:
Not all sizes are available in Standard Port (RF15/RF30) Models - See price pages
*17-4 Stem is Required when using PEEK seats
Cavity Fillers only Available in F15 and F30 Models
Special V Port Angles are available on request.

Segmented S19 - Part No FTUS18020100

Service Ball Special
Series Size - Base Code Body Trim - -
Mod Mod Features
19 1000 - 11003 T 048 - N N
1 2 - 3 4 5 - 6 7 - 8
Example:191000-11003T048-NN = 10" S19, Segmented, ANSI 150 RF Flanged Ends, 317 Stainless Steel Body & Segment, 17-4PH Stem, Metal Seated, PTFE Packing.
1 Series 19 S19 Segmented Control Valves Website Link Brochure Technical Bulletin - TB1013
0100 1" 0300 3" 0800 8"

2 Size 0150 1-1/2" 0400 4" 1000 10"
0200 2" 0600 6" 1200 12"
- -
11001 S19 - RF Flanged - Class 150 - Soft Seated 11003 S19 - RF Flanged - Class 150 - Metal Seated
Base Code
11002 S19 - RF Flanged - Class 300 - Soft Seated 11004 S19 - RF Flanged - Class 300 - Metal Seated
3 End 11000 S19 - Wafer - Class 150/300 - Soft Seated (1"-8") 11005 S19 - Wafer - Class 150/300 - Metal Seated (1"-8")
Connection & 11008 S19 - Wafer - Class 150 - Soft Seated (10" only) 11007 S19 - Wafer - Class 150 - Metal Seated (10" only)
Seat Type
11006 S19 - RF Flanged - Class 600 - Metal Seated
S 316 Stainless Steel T 317 Stainless Steel

4 Body
C WCB Carbon Steel
Stem &
Segment Seat O Ring Gasket Packing
Post
010 CF8M 17-4PH Tek-Fil / 316 Viton PTFE PTFE + Carbon Fiber
012 316 (CF8M) + Hard Chrome Plated 17-4PH Stellite 6 / 316 Viton PTFE PTFE + Carbon Fiber
048 317 (CG8M) + Hard Chrome Plated 17-4PH Stellite 6 / 317 Viton PTFE PTFE + Carbon Fiber
5 Trim 022 CF8M 17-4PH Tek-Fil / 316 FFKM Graphite Graphite
024 316 (CF8M) + Hard Chrome Plated 17-4PH Stellite 6 / 316 FFKM Graphite Graphite
030 CF8M 17-4PH Tek-Fil / 316 AFLAS PTFE PTFE + Carbon Fiber
053 316 (CF8M) + Hard Chrome Plated 17-4PH Stellite 6 / 316 AFLAS PTFE PTFE + Carbon Fiber
- -
Service
6 Modification
N None
Ball
7 Modification
N None
- -
Special ???? Consult Factory
8 Features
(Optional)
NOTES:
19 Series Segmented Valves come standard bare stem.
Consult Factory for correct Bray 10 Position Lever kit if required
Special Configurations and Seat Designs available - Consult Factory
Base Codes must match the Trim for soft (Tek-Fil) or Metal (Stellite 6) seated.
Face to Face Dimensions: Wafer = Flow-Tek Internal Standard
Face to Face Dimensions: Flanged = ANSI/ISA 75.08.02 (ISA S75.04) / IEC 60534-3-2
Leakage Class: Soft Seat = Class VI per IEC 60534-4 / ANSI / FCI 70-2
Leakage Class: Metal Seat = Class IV per IEC 60534-4 /ANSI / FCI 70-2


Flow-Tek Part Number Selection Guide

Uploaded by

Copyright:

Available Formats

Flow-Tek Part Number Selection Guide

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Flow-Tek Part Number Selection Guide

Uploaded by

Copyright:

Available Formats

What are the different types of valves described in the document?

What are the different types of valves described in the document?

What materials of construction are available for the different valve types?

What materials of construction are available for the different valve types?

Threaded Valves Part Numbers FTUS18020100

PART NUMBER - VALVE SELECTION

1 Series 16 Threaded Valves Website Link

0025 1/4" 0100 1" 0250 2-1/2"

S 316 Stainless Steel

S 316 Stainless Steel Ball with 316 Stainless Steel Stem

R RPTFE V PVDF (HP6000 Only)

R RPTFE T PTFE (S51 Only)

8323 N. Eldridge Pkwy. #100 www.bray.com/sales-terms-and-conditions Phone 832-912-2300

PART NUMBER - VALVE SELECTION

0025 1/4" 0100 1" 0250 2-1/2"

S 316 Stainless Steel (5000)

8323 N. Eldridge Pkwy. #100 www.bray.com/sales-terms-and-conditions Phone 832-912-2300

PART NUMBER - VALVE SELECTION

0500 1/2" 0150 1-1/2" 0300 3"

4 Body L 316L (CF3M) Stainless Steel

8323 N. Eldridge Pkwy. #100 www.bray.com/sales-terms-and-conditions Phone 832-912-2300

PART NUMBER - VALVE SELECTION

7000 Model DM7000

0025 1/4" 0100 1" 0250 2-1/2"

S 316 Stainless Steel (7000 & DM7000) A Alloy 20

8323 N. Eldridge Pkwy. #100 www.bray.com/sales-terms-and-conditions Phone 832-912-2300

PART NUMBER - VALVE SELECTION

0025 1/4" 0100 1" 0250 2-1/2"

4 Body C WCB Carbon Steel (8000)

6 Seats R RPTFE J TFM 1600

7 Seals R RPTFE J TFM 1600

8323 N. Eldridge Pkwy. #100 www.bray.com/sales-terms-and-conditions Phone 832-912-2300

PART NUMBER - VALVE SELECTION

0100 1" 0200 2" 0400 4"

4 Body S 316 Stainless Steel

5 Ball & Stem S 316 Stainless Steel Ball and Stem

8323 N. Eldridge Pkwy. #100 www.bray.com/sales-terms-and-conditions Phone 832-912-2300

PART NUMBER - VALVE SELECTION

0025 1/4" 0100 1" 0250 2-1/2" (SP Triad Only)

S 316 Stainless Steel

J TFM 1600 U UHMWPE

8323 N. Eldridge Pkwy. #100 www.bray.com/sales-terms-and-conditions Phone 832-912-2300

PART NUMBER - VALVE SELECTION

S 316 Stainless Steel

8323 N. Eldridge Pkwy. #100 www.bray.com/sales-terms-and-conditions Phone 832-912-2300

PART NUMBER - VALVE SELECTION

1 Series 15 Flanged Series - Floating Ball Valves Website Link

0050 1/2" (Full Port Only) 0200 2" 0600 6"

S 316 Stainless Steel A Alloy 20

D 316 Stainless Steel Ball with 17-4 SS Stem

J TFM 1600 U UHMWPE

8323 N. Eldridge Pkwy. #100 www.bray.com/sales-terms-and-conditions Phone 832-912-2300

PART NUMBER - VALVE SELECTION

0050 1/2" 0200 2"

S 316 Stainless Steel

6 A351-CF8M w/ HVOF Chrome Carbide & 660 Stainless Steel Stem

6 Seats 6 A351-CF8M w/ Chrome Carbide

8323 N. Eldridge Pkwy. #100 www.bray.com/sales-terms-and-conditions Phone 832-912-2300

PART NUMBER - VALVE SELECTION