1104C-44T Industrial Diesel Engine

74.5 kW (99.9 hp) @ 2300 rpm

EU Stage II/U.S. EPA Tier 2 equivalent

Whatever your application, there’s an 1104 engine for you. Part of the Perkins
1100 Series, the range’s 4 cylinder, 4.4 litre engines are smooth and quiet in
operation. Designed to meet EU Stage II/IIIA and U.S. EPA Tier 2/Tier 3
equivalent emissions standards, the 1104 range offer a choice of mechanical or
electronically controlled common rail engines. Electronically controlled engines
deliver the right fuel injection for the load applied to the engine. Common front
and rear ends, connection points and components across the range, making it
easy to install a different 1100 Series engine in your application.
Turbocharged engine designed to meet EU Stage II/U.S. EPA Tier 2 equivalent
emissions standards for off road machines.

Specifications
Power Rating
Minimum power 74.5 kW 99.9 hp
Maximum power 74.5 kW 99.9 hp
Rated speed 2300 rpm
Maximum torque 415 Nm @ 1350 rpm 306 lb-ft @ 1350 rpm

Emission Standards
Emissions EU Stage II/U.S. EPA Tier 2 equivalent

General
Number of cylinders 4 inline
Bore 105 mm 4.13 in
Stroke 127 mm 5 in
Displacement 4.4 litres 269 cubic in
Aspiration Turbocharged
Cycle 4 stroke
Compression ratio 18.2:1
Combustion system Direct injection
Rotation (from flywheel end) Anti-clockwise
Cooling system Liquid

www.perkins.com
Photographs are for illustrative purposes only and may not reflect final specification.
All information is substantially correct at time of printing and may be altered subsequently.
Final weights and dimensions will depend on completed specification.

SS-10435201-1000002312-004 SS Page 1 of 5
MSS-IND-1000002312-006.pdf Produced In England © 2017 Perkins Engines Company Limited Page: M-1 of M-3
1104C-44T Industrial Diesel Engine
74.5 kW (99.9 hp) @ 2300 rpm
EU Stage II/U.S. EPA Tier 2 equivalent

Total coolant capacity 7 litres 1.9 US gal

Engine Dimensions*
Length 663 mm 26.1 in
Width 597 mm 23.5 in
Height 810 mm 32 in
Dry weight 372 kg 820.1 lb

Disclaimer
*Final dimensions dependent on selected options 0 0

Features and Benefits

Designed for lesser regulated territories
The 1100 Series range of engines have been specifically designed for use in territories with Stage II/IIIA and Tier
2/3 equivalent emissions standards, using the best technologies to ensure a reliable and easy to maintain
machine. With a choice of naturally aspirated, turbocharged and turbocharged aftercooled it offers the best
combination of power delivery and response.
Ease of maintenance
All of the engines have 500 hour service intervals. And single side service components, for ease of end user
servicing.
Easy to upgrade
Common front and rear ends, connection points and components across the range mean that you can easily
install a different 1100 Series engine in your application.
Expertise whenever you need it
With our network of distributors, you will find all the advice you need to ensure you get the right engine. By
building strong relationships with you, we make sure you have access to the full power of the Perkins brand and
expertise. Our fully trained experts deliver total service support 24/7, 365 days of the year. Whether you need
technical information, parts identification or ordering, our distribution network is there to make sure your Perkins
engine keeps on running at peak performance.
Oil and fuel filtration
The high quality oil and fuel filtration on our 1100 Series range produces an engine that is reliable and durable.
Ecoplus fuel filtration is available to boost its clean running qualities and the engine is capable of running on a
wide range of global fuels including biodiesel.

www.perkins.com
Photographs are for illustrative purposes only and may not reflect final specification.
All information is substantially correct at time of printing and may be altered subsequently.
Final weights and dimensions will depend on completed specification.

SS-10435201-1000002312-004 SS Page 2 of 5
MSS-IND-1000002312-006.pdf Produced In England © 2017 Perkins Engines Company Limited Page: M-2 of M-3
1104C-44T Industrial Diesel Engine
74.5 kW (99.9 hp) @ 2300 rpm
EU Stage II/U.S. EPA Tier 2 equivalent

Technical Information
Air inlet system
• Cast iron exhaust manifold – centre side outlet
• Integral inlet manifold
• Turbo outlet orientation
Control system
• 12 and 24 volt alternator 55, 65, 85, 100 amp
• 12 and 24 volt starter motor
Cooling system
• Cooling fan
• Gear driven coolant pump
• Water outlet
Flywheel and flywheel housing
Fuel system
• Plastic J2044 fuel system standard
General
• Balancer or non-balancer
• Cast iron engine block
• Choice of filler positions
• Glow plug starting aid
Oil system
• Dipstick (left or right position)
• Lubricating oil sump
Power take-off
• Provision for PTOs

www.perkins.com
Photographs are for illustrative purposes only and may not reflect final specification.
All information is substantially correct at time of printing and may be altered subsequently.
Final weights and dimensions will depend on completed specification.

SS-10435201-1000002312-004 SS Page 3 of 5
MSS-IND-1000002312-006.pdf Produced In England © 2017 Perkins Engines Company Limited Page: M-3 of M-3
1100 Series 1104C-44T INDUSTRIAL ENGINE
EU Stage II/U.S. EPA Tier 2 equivalent
62.0-74.5 kW / 83.1-99.9 hp

Rated Speed
Power kW Power hp Torque Nm Torque lb-ft Speed (rpm) Rating Type
(rpm)
62.0 83.1 2200 353 478 1400 Industrial C intermittent rating
66.5 89.2 2200 387 524 1350 Industrial C intermittent rating
68.5 91.9 2200 395 535 1350 Industrial C intermittent rating
72.0 96.6 2000 405 549 1350 Industrial C intermittent rating
72.0 96.6 2100 405 549 1350 Industrial C intermittent rating
72.5 97.2 2200 405 549 1350 Industrial C intermittent rating
72.5 97.2 2300 405 549 1350 Industrial C intermittent rating
72.5 97.2 2000 408 553 1350 Industrial C intermittent rating
74.0 99.2 2100 408 553 1350 Industrial C intermittent rating
74.0 99.2 2200 413 560 1400 Industrial C intermittent rating
74.5 99.9 2200 408 553 1350 Industrial C intermittent rating
74.5 99.9 2300 408 553 1350 Industrial C intermittent rating

www.perkins.com
Photographs are for illustrative purposes only and may not reflect final specification.
All information is substantially correct at time of printing and may be altered subsequently.
Final weights and dimensions will depend on completed specification.

SS-10435201-1000002312-004 SS Page 4 of 5
TSS-2166-00-PERIF2F-PERIND-10435201.pdf Produced In England © 2016 Perkins Engines Company Limited Page: 1 of 2
1100 Series 1104C-44T INDUSTRIAL ENGINE
EU Stage II/U.S. EPA Tier 2 equivalent
62.0-74.5 kW / 83.1-99.9 hp
Rating Standard ISO 14396:2002
Additional ratings are available for specific customer requirements. Consult your Perkins distributor.
Unless otherwise specified, all stated data is for maximum rated speed and 100% load.
B rating performance data will be added upon availability

Rating Definitions and Conditions

IND-C (Intermittent) Rating
Is the horsepower and speed capability of the engine where maximum power and/or speed are cyclic (time at full load not to
exceed 50%).

Rating Conditions for Diesel Engines – up to 7.1 liters are based on ISO/TR14396, inlet air standard conditions with a total
barometric pressure of 100 kPa (29.5 in. Hg), with a vapor pressure of 1 kPa (0.295 in Hg) and 25°C (77°F). Performance is
measured using fuel to specification EPA 2D 89.330-96 with a density of 0.845-0.850 kg/L @ 15°C (59°F) and fuel inlet
temperature 40°C (104°F).

www.perkins.com
Photographs are for illustrative purposes only and may not reflect final specification.
All information is substantially correct at time of printing and may be altered subsequently.
Final weights and dimensions will depend on completed specification.

SS-10435201-1000002312-004 SS Page 5 of 5
TSS-2166-00-PERIF2F-PERIND-10435201.pdf Produced In England © 2016 Perkins Engines Company Limited Page: 2 of 2