TJ100MC-1 STM-1 (OC-3) Multi-Service Provisioning Platform

The TJ100MC-1 Multi-Service Provisioning Platform (MSPP) is a

compact, leading-edge and yet practical, bandwidth provisioning
equipment designed to meet low or medium capacity bandwidth
service demands.

The product supports end-to-end provisioning and management of

services across all segments of the optical network. It combines
innovative optical networking software with the intelligence of SDH/ As transmission networks are gradually being dominated by data
SONET to deliver a flexible solution to today’s service providers. It traffic, TJ100MC-1 provides 10/100 Base-T interfaces to efficiently
is well suited for applications where multiple services need to be carry inter-office data traffic from a corporate LAN, traffic from an
aggregated and transported across an optical backbone. ISP, DSL, Cable Networks and so on.

Benefits to the Customer

The TJ100MC-1 supports various features, which translate into various benefits for the customer.
Provided below is the Feature-Benefit mapping.

Features Advantages Benefits

Multiple tributary slots Flexibility and modularity in tributary configurations “Build as you grow”. Pay for
capability you require today.
Provides improved cash flow with
minimum initial capital outlay
Cost-effective Terminal Can be placed in customer premises or PoP’s with A practical and cost effective
Multiplexer and space constraints solution catering to low volume
Add-Drop Multiplexer traffic requirements
3U chassis – available Space efficient Better utilization of available rack
in rack mounting option space and easy installation at
customer premises.
Integrated multi-service Provision both voice and data services from the same Future-proof architecture
delivery platform. Efficient use of transport bandwidth by protecting investment
supporting per-port rate adaptive Ethernet Services
Point-to-point, linear, Diverse topology support to cater to all customer Flexible and cost-effective network
ring & mesh topologies network scenarios solutions
Multi-level protection Advanced protection schemes enable you to cater to Creation of differentiated services
schemes MSP/APS, differing customer protection requirements to enhance the portfolio of service
SNCP/UPSR or MS- offerings
SPRing/BLSR
Advanced networking Enables automatic topology discovery, shared mesh Reduction in operational costs and
software with support restoration and Point- and-Click Provisioning (PNCP) increase in efficiency through
for open standards such User friendly GUI based Network Element Software lower provisioning time and
as GMPLS and OSPF for local and remote provisioning operator intervention
Direct Ethernet to Enables creation of point-to-point Transparent LAN Cost-effective methods to create
SDH/SONET mapping services or Virtual Private Network Services new Ethernet Data services for
using built-in 10/100 incumbent or new carriers
Base-T interfaces
 TJ100MC-1: Application Diagram Applications of
Corporate Office/SOHO/ TJ100MC-1
Residential Campus

The Tejas TJ100MC-1 has a variety

Government/University Campus
10/100 Base-T
Ethernet of service interfaces such as E1/
E1/DS1/10 Base-T
Corporate LAN Ethernet DS1, E3/DS3, E4, STM-1e/o (OC-3/
STS-3e) and 10/100 Mbps Ethernet
tributary interfaces and trunk
10/100 Base-T
Ethernet
interfaces at STM-1 or OC-3 rates
E1/DS1s
are supported. The product features
TJ100MC-1
BTS non-blocking cross-connect at VC-
3/VC-4 and VC-12 (STS-1 or VT1.5)
STM-1/0C-3 Ring granularity and supports drop and
TJ100MC-1
TJ100MC-1 EPABX continue functionality.
E1/DS1/E3/DS3/
E1/DS1/E3/DS3/STM-1/0C-3/ 10/100 Base-T Ethernet
10/100 Base-T Ethernet
This enables the TJ100MC-1 to
support a variety of applications as
listed below.

l
Technical Specifications *
Access networks

l
l
Regional Backbone
Network Element Configurations Optional hardware redundancy: Power Supply Timing and Synchronization
l Terminal Multiplexer (TMUX) l 1:3 E1/DS1Tributary Protection l Timing & Synchronization of system (as per ITU- l Wireless backhaul
l T G.813)
l
Add-Drop Multiplexer (ADM) Maintenance
l Ethernet LAN over SDH WAN
l
Internal and External Timing Interfaces:Two E1
Aggregate Interfaces Higher-order and Lower-order POH, SDH/SONET
l
BITS interfaces (as per ITU-T G.703)
l level alarms and performance monitoring (as per
l
2 x STM-1 e/o (OC-3/STS-3e) Customer Premise equipment
Internal oscillator capable of supplying an ITU-T
l
ITU-T G.826 and G.784)
S1.1, L 1.1, L1.2 (ITU-T G.957 Compliant)
l Software Upgrades
G.813 compliant Stratum-3E carrying TDM as well as Ethernet
Tributary Interfaces l SSM support traffic
l
Power Supply

l
E1/DS1, E3/DS3, E4
l
Order wire support, Alarms and User
l
Power Input: -48V DC nominal, -36V to 60V DC Multiple-ADMs (MADM) and
STM-1o/STM-1e (OC-3/STS-3e) Data Channel
Power consumption: 35W (without Ethernet
l 10/100 Base-T Ethernet Interfaces) l E1/E2 bytes used for Express order wire Wideband DXC for superior
(Omnibus/Selective calling facilities)
Modularity bandwidth management and
l
Network Topology
l
Five potential free outputs and two potential-free
Separate aggregate and tributary cards l Linear, Mesh, Ring inputs
utilization
l
l
l
Mix and match tributaries – E1/DS1, E3/DS3, E4,
Network Management F1 byte for user data channel Optical transport for Digital Loop
STM-1o/e (OC-3/STS-3e), 10/100 Ethernet
l Web-based User Interface Physical Dimensions
Cross-Connect Carrier (DLC)
l l
l
RS-232 port for craft interface Dimensions (H x W x D): 132mm x 438mm x
252 X 252 VC-12 (336 x 336 VT1.5)
l
l
In-band control supported using SDH overhead 230mm
4 x 4 STM-1 (OC-3)
bytes l
l
Weight: 5.5 Kg. (max. configuration)
l
Line to Line, Line to Tributary, Tributary to Line,
E1/VC-12 management channel support with drop
Tributary to Tributary Environmental
Protection
l
facility
10/100 Base-T/RJ45 management interface
l OperatingTemperature:0o to 50o C Flexible and
l l
l Cost-effective
SNCP/1+1 MSP (as per ITU-T G.841) Relative Humidity: 10% to 90%, non condensing
Alarm signaling indicators and external contacts
l VC-12 /VT1.5 Level path protection
network solutions
For further information please contact us at: sales@tejasnetworks.com Visit us at: www.tejasnetworks.com
Corporate Headquarters:
Tejas Networks India Ltd.
1st Floor, Zone 2, Khanija Bhavan, 49 Race Course Road, Bangalore 560 001, India. Tel:+91-80-2226 7495, Fax:+91-80-2226 7494.
* Technical specifications subject to change without notification.