Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 221 views

    Brochure DynaFlex

    Uploaded by

    Riky
    avara

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Brochure DynaFlex

    Uploaded by

    Riky
    221 views4 pages
    avara

    Original Title

    brochure_DynaFlex

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    avara

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    221 views4 pages

    Brochure DynaFlex

    Uploaded by

    Riky
    avara

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    DynaFlex Multiplexer

    Avara’s DynaFlex product family is a flexible, fully


    featured, access multiplexer with powerful cross
    connect & protection capabilities, interoperable
    and compatible with the Nokia Dynanet product.
    D13051301 Revision 6
    DynaFlex - The dedicated platform DynaFlex Specifications Overview

    Avara’s DynaFlex product family is a flexible, fully featured, access multiplexer with powerful cross
    connect and protection capabilities that is fully interoperable and compatible with the Nokia Dynanet
    product.

    With the capability to handle a wide range of interfaces like POTS, SCADA, Ethernet, Serial Data and DB4 – Primary Multiplexer Controller
    Tele-Protection, the DynaFlex platform is an ideal choice for transporting mission critical TDM services
    over PDH, SDH or Ethernet based packet interfaces. • 4 x E1 (G.703/G.704) interfaces with CAS & CRC support
    • 120Ω balanced or 75Ω unbalanced options
    • DynaFlex offers a broad range of hot pluggable channel cards to complement a range of physical
    • Manageable via Q1, SNMP and Telnet
    interfaces in a modular manner:
    • Supports TS0 and TSx Q1 Management
    • Supports fully non-blocking cross connects

    A wide range of interfaces are supported: • Supports Branching, Digital Summing and VF
    Summing functions
    • C37.94 Tele-protection
    • RS232 console via RJ45
    • VX V and X Type Serial Interface • 2 X 10/100 Ethernet on a single RJ45 for Management
    • G.703 -64K Interface • Integrated high performance Ethernet switch fabric
    • 4 x Ethernet WAN directions
    • ESU layer 2 Ethernet Interface
    • Independant timing input and output interfaces
    • FXS POTS Interface (Sub-Sub) • Pluggable into Dynanet mechanics
    • FXO POTS Interface (Sub-Exchange) • Interoperates with Dynanet DB2/DB2LP/DN2/DM2/DM2+.
    • Point-to-point, linear, mesh & loop topology
    • VF Voice Frequency Interface
    • Smart E1 loop detection to preserve management connectivity
    • SIP30 POTS to SIP Interface • -20 to -72 VDC Power Supply
    • -20 to +65 °C fanless operation

    The DB4 provides traditional PCM multiplexing, Nx64K/8K granularity


    Cross Connection and various Branching Capabilities for creating
    protected circuits using up to 4 x E1 interfaces. This unit also supports DB4X (Switched Ethernet Transport support)
    layer 2 switching and has QoS and VLAN capabilities including complex Contains the following additional interfaces & functionality:
    rate limiting methods, thus enabling the use of the existing E1
    infrastructure to deliver Fast Ethernet services. • 4 x 10/100 Ethernet ports

    • The DB4 can be used as a direct replacement for the Dynanet DB2. • 4 x V.11 ports with data hybrid functionality
    It offers full remote configuration using Q1 and Telnet Protocols and • Tag based VLAN (802.1q) and port based VLAN support
    monitoring using SNMP, enabling the use of existing management
    platforms to fully manage, configure and monitor DynaFlex • Per VLAN MAC Address Table
    elements. • 802.1p priority

    Software download using TFTP is supported, thus reducing installation • Rate limiting on Ethernet ports
    time. A comprehensive set of SNMP traps and alarms are provided to
    assist fault management & isolation. DynaFlex can be managed locally
    via CLI or Service Terminal and remotely using Q1 and Telnet. Ethernet
    / IP based management interfaces can be supported over a separate
    VLAN thus offering a greater level of security for management traffic.
    DB4X
    DB4
    DynaFlex Channel Cards DynaFlex Mechanics and Power Adapters
    C37.94 Channel Unit
    • 4 x IEEE C37.94 optical tele-protection interfaces
    • Programmable output power
    • Nx64kbit/s (where N = 1 .. 12 per interface)
    • Multi-mode fibre support
    VX Channel Units
    • 4/8 x V/X type interfaces supporting a full complement of V.24/X.24 circuits
    • Supports V.11, V.24, V.28, V.35 and X.21 serial protocols
    • Synchronous and Asynchronous Operation
    G.703-64K Channel Unit
    • 10 x G.703 64K interfaces
    • 2kV Transformer Isolation
    • 64kbits/s co-directional & contra directional timing

    EXU Channel Unit M4 Subrack


    • 8 x 10/100BASE-T Ethernet ports
    M4 Subrack
    • VLAN and QoS Support (802.1p/q)
    • 3RU with 4 slots available
    • Extensive Rate limiting options
    • Integrated AC or DC power supply
    • Support for 4096 VLANS
    • Optional integrated 16 x RJ45 connector patch panel
    • 1632 Byte MTU with 8K MAC Addresses
    FXS Channel Unit M16 Subrack
    • 8 x Subscriber Interfaces
    • 6RU with16 slots available in total (1 x PIU with 15 slots available for other cards)
    • Integrated Ring Generator
    • Can optionally support two power interface units (2 x PIU with 14 slots available for other cards)
    • Interface ITU-T G.712, G.711 and Q.552
    • -20 to -72VDC Power Interface Unit (PIU)
    FXO Channel Unit
    • 8 x Exchange Interfaces
    • Interface ITU-T G.712, G.711 and Q.552
    VF Channel Unit Enviromental ratings
    • 8 x 2 / 4 wire tranformer isolated VF channels C37.94 Channel Card
    • Operating Temperature -20 °C to +65 °C
    • 2 x E&M interfaces per channel • Relative Humidity 5-90% (Non-condensing)
    • Configurable input and output levels • EN55022 Class A Emissions
    • Interface ITU-T G.711 and G.712 • EN60950 Safety
    SHDSL Channel Unit • EN55024 Immunity
    • 4 x SHDSL Interfaces • EN50082-2 Generic Immunity
    • Interface ITU-T G.992.1 G.703-64K Channel Card • IEC 61850-3 Immunity

    SIP30 Channel Unit • ETS 300 019 -1-1 Operational


    • SIP30 can terminate up to 30 voice channels from up to 4 E1 interfaces and convert them to SIP • ETS 300 019 -1-2 Storage
    • A full 64K cross connect is available on board to perform grooming of the TDM voice circuits allow- • ETS 300 019 -1-3 Transport
    ing the SIP30 to be located at more centrally and easily accessible sites
    • Call features include; parallel ring, group pick-up, hunt group, call forwarding, call hold and com-
    mon ring group.
    DynaFlex Transport Cards

    DFX100/1000 Optical Transport Card


    • 4 x 10/100Base-T Ethernet Ports
    • 4/8 x G.703/2M E1 Ports (DFX100 = 4E1, DFX1000 = 8E1)
    • 2 x V.11 Serial Data Ports supporting asynchronous operation
    • 2 x 1000Base-X (SFP based) Network Interfaces on DFX1000
    • 2 x 100Base-X (SFP based) Network Interfaces on DFX100
    • 1 x 1000Base-X (SFP based) Tributary Interface (DFX1000 only)
    • Point to point, linear and ring topology support
    • Sub 50ms protection switching in ring mode
    • High performance Ethernet layer 2 switch fabric
    with 802.1p/q VLAN capabilities
    • Rate Limiting on Ethernet ports
    • Supports both VLAN access ports as well as trunk ports
    • Management via Q1, SNMP, Telnet, CLI, Web Browser

    DFS-1/4 SDH Transport Card


    • 2 x 155/622 Mbps SFP receptacles
    • 2 x 155 Mbps SFP receptacles
    • 12 x E1 2.048 Mbps 120 Ω
    • 4 x 10/100/1000BaseT Electrical
    • Management via ASPeCT & SNMP

    SHDSL Transport card


    • 4 x SHDSL Interfaces with M-Pair bonding
    • 4 x E1 (120 Ohm) Interfaces
    • Transparent E1 or Nx64K over SHDSL transport
    • Management via Q1, ASPeCT, SNMP, Telnet, & CLI
    DFX1000

    Head Office Regional Distributor

    9 Business Park Drive


    Notting Hill, Victoria 3168
    Australia
    Tel: +61 3 95400330
    Fax:+61 3 99236545 N13071

    www.avaratechnologies.com

    This publication is issued to provide information only which (unless agreed by Avara Technologies Pty. Ltd. in writing) may not be used, applied or reproduced for
    any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. Avara Technologies reserves
    the right to alter without notice the specification, design, price or conditions of supply of any product or service. © Avara Technologies Pty. Ltd. 2010

    You might also like