Training Report
Training Report
Training Report
SUBMITTED BY
Shikotra Sachin
shikotrasachin@gmail.com
STUDENT OF
SAL INSTITUTE OF TECHNOLOGY AND
ENGINEERING RESERCH
AHEMDABAD (11th to 20th February)
ACKNOWLEDGEMENT
Last but not the least I am very thankful to the company and the
entire department Heads for their constant guidance. I felt very
proud for getting my training in this company.
Abstract
The industrial training is very essential element, as it plays
important role in an engineer’s life. As we know all that the
industrial training is the right way for understanding the
theoretical concept more effectively. Sometimes it happens that
the simple theory becomes big complication when they are
applied practically.
Hence, it is necessary for engineer to undergo through in-plant
training as it gives practical knowledge about the implemented
theory. As today, the experience of an engineer is considering
more valuable than his education degree. The industrial training
helps a lot.
As we are finally exposed to an industrial environment, the
engineer gains the maximum knowledge regarding the technology
and management system possessed by the company, through
which one can improve its working ability. Clearing all the
doubts, he has a better image of the industrial field, which greatly
influences his future carrier.
I fill very lucky to take an industrial training in ‘Jyoti CNC
Automation Ltd.’ at Rajkot, a Leading CNC Machine
Manufacturing Company.
So, I am glad to present this in plant training report which
contains the contents regarding the concepts of practical training
through which I passed.
Index
Chapter 1: Introduction
Chapter 2: Foundry shop
2.1 Pattern shop
2.2 Foundry section
Chapter 3: sheet metal shop
3.1 Metal cutting
3.2 Sheet bending
3.3 Welding
3.4 Grinding and Finishing
Chapter 4: Machine-Shop & Electrical Maintance
Chapter 5: Sub-Assembly
Chapter 6: Assembly
Chapter 7: conclusion
Chapter 1: Introduction
1. Wooden pattern
2. Aluminum pattern
3. POP pattern
4. Thermocol pattern
But generally wooden pattern are used.
Designing the pattern as per CNC part required.
Design a core component.
Making the core.
Making the pattern.
Painting the core and pattern
3.3 Welding
Once laser cutting operation and bending operation is done then
parts are going to welding section. In welding section there are
different types of welding process is used.
1. MIG
2. TIG
3. Spot welding
4. Stud welding
In MIG welding, electrode is consumable. Copper wire electrode
is fed continuously with the help of welding gun.
In TIG welding, electrode is non consumable, and arc is generated
by tungsten.
Spot welding is done by electric current. And pressure is applied
from both side.
Stud welding, in these process stud is mounted on the sheet and
pressure is applied.
Drilling process, if we need small holes than we use it. Robot
welding is also used. When we need welding at any complicated
part at that time we use robot welding and also used for heavy
parts.
There are total seven sections, five are machine shop and two are
grinding shop. Each machine shop doing different different
operation.
In machine shop 5, heavy machine are there, also there are hard
hardening machine if we increase any parts hardness then we use
it. Machine shop 3 &4 only heavy machine are there. And
machining only on large parts like bed, column and etc. In turning
machine there are turret for tool changer and other machines ATC
used. There are two types of ATC one is drum type and second is
chain type. With the help of ATC we can reduce tool changing
time and increase production rate.
Machine shop 1,2 & 5 are also perform small types of jobs. When
the parts are small and require to change in every so it takes more
time so that we use automatic pallet changer so that reduce
loading and unloading time. There are total six pallet changer
machine. There are many types of machines like 2-axis, 3-axis, 4-
axis, 5-axis machine. If we need machining at any angle at that
time we use 5-axis machine, in this machine 4th axis is workpiece
rotating table and 5th axis is tool at any angle.
During machining process tool wear and tool breakage chances is
more so that we use coolant system. Water and cutting fluid
mixture are used as coolant. And its change once in a year.
Grinding shop
There are many motors are used for lubricating, CNC operating,
cooling, axis movements electrical motor are used
In penal box mainly three types of wire are used for opration of
CNC machines