GTC-800

80t Telescopic Boom Crawler Crane

SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

GENERAL DATA COUNTERWEIGHT

6 piece counterweight design. Three upper counterweight
CRANE CAPACITY 80t at 3.0m
configurations
BOOM 5-section, • “A” Configuration = 20,411 kg
11.5 m – 43.0 m • “B” Configuration = 13,608 kg
DIMENSION • “C” Configuration = 6,804 kg
Overall Length 14.00 m • Two carbody counterweights, 4535 kg each
Overall Width (tracks extended) 5.32 m WINCHES
Planetary geared two-speed winch includes a hydraulic motor, multi-
Overall Width (tracks retracted) 3.49 m
disc internal brake and counterbalance valve. Drum rotation indicator
Overall Width (tracks removed) 2.95 m is included (complete winch performance specs on Page 3)
Overall Height (working) 3.97 m • Main Winch
MASS o Rope Diameter and Length: 19mm x 212m
o Single line pull: 88.2 kN (first layer)
Gross Vehicle Mass 82,628 kg o Single line speed: 112.2 m/min (4th layer)
(Standard Equipment Package) • Auxiliary Winch
Maximum Counterweight Upper = 20,411 kg o Rope Diameter and Length: 19mm X 146m
Carbody = 9,070 kg o Single line pull: 88.2 kN (first layer)
PERFORMANCE o Single line speed: 112.2 m/min (4th layer)
Travel Speed 1.0 km/hr / 3.4 km/hr
TRAVEL
Gradeability 78% Each side frame contains a pilot controlled, two-speed track drive
with hydraulic axial piston motor and parking brake. Travel system
CRANE SPECIFICATION provides skid steering and counter rotation.
• Travel speed - Low: 1.0 km/h High: 3.4 km/h
MODEL CAPACITY • Gradeability (unladen): 78%
GTC-800 80t at 3.0m • Unladen Ground Pressure: 0.81 kg/cm2

BOOM SWING
5-section full power telescoping boom with 2 extension modes. Gear motor driving a planetary gear reducer with a shaft mounted
System consists of three double acting hydraulic cylinders with load pinion, external gear shear ball slew bearing bolted to the
holding valves and extension and retraction cables. superstructure and the carbody allows the superstructure to rotate 360°
• Retracted Length: 11.5m • Swing Speed: 0 - 2 rpm
• Extended Length: 43.0 m • Extension Time: 161 s • Swing Parking Brake: Spring applied failsafe brake with hydraulic
• Elevating Angles: -1.5° to 81.5° • Elevating Time: 87 s release that is controlled from the operators cab
• Max Lifting Height: 42.1m • Swing Service Brake: Hydraulically applied, controlled through foot
• Boom Head: Six, 495 mm diameter cast nylon main sheaves on actuated pedal
heavy-duty roller bearings. Two, 445 mm diameter lead in sheaves • House Lock System:
on heavy-duty roller bearings. Designed for quick reeving of head o 4-position house lock (boom over front, rear or either side).
and load block. Actuated from the operator’s cab.

AUXILIARY BOOM HEAD LOAD MOMENT INDICATOR

Quick reeve, single 445 mm diameter high-strength, sheave mounted TADANO AML-C Rated Capacity Limiter and Anti-Two Block system
on a heavy-duty roller bearing. Allows single part reeving. • Control function shutdown. Audible and visual warnings
• LCD screen provides a continuous display of working boom
length, boom angle, working load radius, tip height, swing position,
parts-of-line (operator set), machine track configuration, relative
load moment, maximum permissible load and actual load.
• Anti-two block weight allows quick reeving of hook block
• Operator configurable working range limits with automatic soft
stop.
GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

FRAME ELECTRICAL SYSTEM

The frame is an all-steel, welded structure, precision machined to 24 VDC
accept attachment of the boom and swing components.
FUEL SYSTEM
OPERATORS CAB • Capacity: 321 liter
Fully-enclosed, air conditioned all-steel modular cab with lockable • Filtration: Inline fuel/water separator and engine mounted fuel filter
sliding door, acoustical lining, anti-slip floor and tinted safety glass.
SIDE FRAMES
• Cab tilts 20°.
Two welded steel side frames are paired with a track group. The side
• Rear view, winch view and right side view video cameras
frames extend and retract hydraulically and are controlled from the
• Three remote control work lights.
cab.
• Vent window in the rear of the cab.
• Track Rollers: Two top and thirteen bottom sealed rollers on
• Grab bars and steps are located for easy access to the cab.
each track frame Idler: Oil filled, self lubricating with nitrogen type
• Defroster, heater, circulating fan
tensioner
• 2-speed windshield wiper, top glass wiper
• Track Shoes: 800 mm, 3-bar semi grouser
• Six-way adjustable fabric seat with headrest, seat belt
• Dome light
HYDRAULIC SYSTEM
• Dry-chemical fire extinguisher
• Hydraulic Pumps: Two high pressure, variable axial piston pumps
• Four-way electronic armrest mounted joysticks control swing, main
with load sense and power limiting control for crane functions. One
winch, auxiliary winch, boom hoist and boom extend. Foot pedals
axial piston pump for swing function. One gear pump for cooling
control the travel and swing service brake functions. Swing brake
loop.
pedal is hydraulic.
• Directional Valves: Multiple pressure and flow compensated valves
• Selectable modes for Fine Control and Travel. Travel function can
with integrated relief valves controlled by electrical signals.
be operated by foot pedals or joystick.
• Pump output: 582 l/min @ 2200 RPM engine speed. 345 bar
• Seat termination switch immediately disable all hydraulic functions
maximum pressure
as the operator rises from the seat. Functions can also be
• Reservoir: 861 liter capacity, spin-on filler/ breather, sight gauge,
disabled by switch on console.
cleanout, and sump drain.
• Dash instrumentation: tachometer, hour meter, fuel gauge, and
• Filtration: Three 5 micron, full flow tank mounted return filters with
DEF level gauge. Indicators are provided for crane level, swing
electrical clogging indicator. 3 micron pilot oil in-line pressure filter
position, load moment, drum rotation, air filter restriction, engine oil
• Diagnostic Ports: Provided for system, load sense, and pilot
temperature and pressure, hydraulic oil temperature and level, and
pressure
hydraulic and air filter restriction, and low voltage.

ENGINE
• Make/ Model: Cummins QSB6.7
• Type: 6 Cylinder, Water cooled, 4 Cycle
• Aspiration: Turbocharged and Aftercooled
• Max.Output: 231 kW @ 2200 RPM
• Max Torque: 1,044 Nm @ 1500 RPM
• Piston Disp: 6.7 L
• Emission Cert: U.S. EPA Tier 4f, Euromot Stage IV
• Alternator: 70 amp

Optional Emissions Certification:

• Make/ Model: Cummins QSB 6.7
• Type: 6 Cylinder, Water cooled, 4 Cycle
• Aspiration: Turbocharged and Aftercooled
• Max.Output: 194 kW @ 2200 RPM
• Max Torque: 987 Nm @ 1500 RPM
• Piston Disp: 6.7 L
• Emission Cert: U.S. EPA Tier 3, Euromot Stage IIIA
• Alternator: 70 amp

2 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

OPTIONAL EQUIPMENT
• Jibs • Overhaul ball – 8t with swivel hook & safety latch
o Heavy lift jib • 360 degree house lock. Actuated from the operator’s cab.
• Total Length: 2.5 m • Offset Angles: 3.5° & 30° • Track Shoes: 800mm steel flat shoes; 900mm 3 bar grouser or
• Max. Lifting Height: 45.3 m steel flat shoes
o Main jib • Auger: Hydraulic auger boom package includes auger motor,
• Total Length: 10.1m • Offset Angles: 3.5°, 25° & 45° hoses, fasteners, and stowage bracket assembly mounted to the
• Max. Lifting Height: 52.9 m 2nd stage section of boom for variable radius drilling.
o Fly jib • Tool Circuit: Provides 23 l/min and 45 l/min at 176 bar through a
• Total Length: 17.7m • Offset Angles: 3.5°, 25° & 45° 15.2m twin hose reel with quick disconnect fittings to operate open
• Max. Lifting Height: 60.4 m center tools.
• Hook blocks • High Flow Tool Circuit: Provides 170 l/min at 330 bar
• 8 0t quick reeve hook block – Six, 495mm steel sheaves, swivel • Carbody Jack System: Includes carbody mounted jacks, valves,
hook and safety latch electric control pendant, and auto-level raise system.
• 5 0t quick reeve hook block – three, 495mm steel sheaves, • Free Fall Hoists: Winches are available in controlled free fall
swivel hook and safety latch configurations.
• 20t quick reeve hook block – one, 495mm steel sheave, swivel • Cold Weather Packages: Cold weather options are available for
hook and safety latch operation to -40°C (Consult factory for application support)
• Work Platform: Model WP750 – 0.9m x 1.8m, all steel, welded, two
person platform with maximum capacity of 340 kg.
• Radio control package.
• Anemometer: boom mounted wireless anemometer with cab
display.
• Central lubrication system.

MAIN WINCH AND AUXILIARY WINCH PERFORMANCE

Wire Rope: 19 mm diameter rotation resistant. Line pulls are not based on wire rope strength.
High Line Speed Normal Line
Rope Layer Max Line Pull (kN) (m/min) Speed (m/min) Pitch Dia (mm) Layer (m) Total (m)
1 88 88.5 52.6 381.9 34.2 34.2
2 80 96.4 57.3 421.7 37.3 71.5
3 73 104.3 62.1 461.5 40.3 111.8
4 67 112.2 66.8 501.3 43.4 155.2
5 62 120.2 71.5 541.1 46.4 201.6
6 58 128.1 76.2 580.9 49.5 251.1

MACHINE WEIGHTS KG
Standard Crane with 5 section - 43m boom, full counterweight, 2 winches with wire rope, auxiliary
nose sheave and 900mm 3-bar semi grouser track shoes, 79,882
Standard Crane with 5 section - 43m boom, auxiliary winch with wire rope and 900mm 3-bar semi
grouser track shoes (Counterweight removed) 50,398
Standard Crane with auxiliary winch with wire rope (Counterweight and track frames removed; with Carbody Jacks) 33,956
OPTIONAL EQUIPMENT KG
Heavy Lift Jib - 2.5m 440
Jib Base - 10.1 m 919
Jib Tip - 7.5m 339
Auxiliary Nose Sheave 48
80t hook block - six sheave 636
50t hook block - three sheave 462
20t hook block - one sheave 296
8t Overhaul Ball 133
Carbody Jacks 1,485
Track Frame with 800mm 3-bar semi-grouser track shoe 8,434
Track Frame with 800mm flat steel track shoe 9288

3 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

DIMENSIONS

4 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

TRANSPORT DIMENSIONS

TRANSPORT PLAN

Transport Plan (no carbody jacks)

Item Weight Dims Trailer
Kg (L x W x H) 1 2 3
Crane (with 2 winches, Boom, wire rope, aux nose sheave) 49,459 13.69m x 3.50m x 3.35m X
Counterweight A - 1 piece 6,804 2.95m x 1.04m x 1.11m X
Counterweight B - 1 piece 6,804 2.95m x 1.04m x .47m X
Counterweight C - 1 piece 1,701 0.91m x 1.0m x 0.47m X
Counterweight C - 1 piece 1,701 0.91m x 1.0m x 0.47m X
Counterweight C - 1 piece 1,701 0.91m x 1.0m x 0.47m X
Counterweight C - 1 piece 1,701 0.91m x 1.0m x 0.47m X
Counterweight - Carbody - 1 piece 4,536 1.30m x 0.95m x 0.88m X
Counterweight - Carbody - 1 piece 4,536 1.30m x 1.35m x 0.88m X
Jib base section 921 10.55m x 1.47m x 0.91m X
Jib point 340 7.84m x 0.73m x 0.73m X
Hook Block - 80 t 628 1.57m x 0.60m x 0.45m X
Headache Ball - 8 t 200 0.72m x 0.27m x 0.27m X
Miscellaneous Items (Crate) 227 1.22m x 0.91m x 0.91m X
Total Net Weight on Trailer (Kg) 49459 19845 11955

Transport Plan (with carbody jacks - tracks removed)

Item Weight Dims Trailer
kg (L x W x H) 1 2 3
Crane (with 2 winches, Boom, wire rope, aux nose sheave,
33,956 13.69m x 3.50m x 3.35m X
carbody jacks, Tracks removed)
Left Track Frame 8,494 6.53m x 0.80m x 1.03m X
Right Track Frame 8,494 6.53m x 0.80m x 1.03m X
Counterweight A 6,804 2.95m x 1.04m x 1.11m X
Counterweight B - 1 piece 6,804 2.95m x 1.04m x .47m X
Counterweight C - 1 piece 1,701 0.91m x 1.0m x 0.47m X
Counterweight C - 1 piece 1,701 0.91m x 1.0m x 0.47m X
Counterweight C - 1 piece 1,701 0.91m x 1.0m x 0.47m X
Counterweight C - 1 piece 1,701 0.91m x 1.0m x 0.47m X
Counterweight - Carbody - 1 piece 4,536 1.30m x 0.95m x 0.88m X
Counterweight - Carbody - 1 piece 4,536 1.30m x 1.35m x 0.88m X
Jib base section 921 10.55m x 1.47m x 0.91m X
Jib point 340 7.84m x 0.73m x 0.73m X
Hook Block - 80 ton 628 1.57m x 0.60m x 0.45m X
Headache Ball - 8 ton 200 0.72m x 0.27m x 0.27m X
Miscellaneous Items (Crate) 227 1.22m x 0.91m x 0.91m X
Total Net Weight on Trailer (kg) 43028 19668 20048

5 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

TRANSPORT DIMENSIONS

6 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

TRANSPORT DIMENSIONS

7 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

WORKING RANGE DIAGRAM

8 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

LOAD CHARTS 360 DEGREE RATING - LOADS IN kg x 1000

MAIN BOOM with TRACKS FULLY EXTENDED ‐ 360°
UP TO 1.5° SLOPE ‐ NO TRAVEL
20.5 t MAIN COUNTERWEIGHT AND 9.1 t CARBODY COUNTERWEIGHT
RADIUS MAIN BOOM LENGTH (m) RADIUS

(m) 11.5 15.4 19.4 23.3 27.3 31.2 35.1 39.1 43 (m)
3 80.0 50.6 50.6 3
4 69.1 50.6 43.8 34.9 33.9 4
5 60.0 50.6 40.8 34.4 30.1 21.7 5
6 52.7 46.6 36.1 30.4 26.7 16.9 16.7 6
7 41.3 38.5 32.3 27.1 23.8 16.9 16.5 16.2 7
8 33.7 31.8 29.2 24.5 21.5 16.9 16.4 15.7 13.1 8
9 28.4 26.6 25.4 22.2 19.5 16.9 16.4 15.5 12.9 9
10 22.7 21.6 20.3 17.8 16.3 15.2 14.3 12.1 10
12 17.2 16.4 16.2 15.0 13.8 13.0 12.3 10.8 12
14 15.5 12.6 12.5 11.9 11.2 10.6 9.6 14
16 12.9 10.6 10.0 10.3 9.8 9.3 8.4 16
18 9.7 8.1 8.6 8.6 8.2 7.4 18
20 9.0 6.7 7.1 7.4 7.3 6.6 20
22 5.5 5.9 6.2 6.4 5.9 22
24 4.6 5.0 5.5 6.0 5.3 24
26 4.6 5.1 5.4 4.8 26
28 4.3 4.8 4.7 4.2 28
30 4.5 4.1 3.7 30
32 4.1 3.6 3.2 32
34 3.1 2.7 34
36 2.8 2.3 36
38 2.0 38
40 1.7 40
42 42
44 44
PARTS OF PARTS OF
12 8 8 6 6 4 4 4 2
LINE LINE

Load chart data is for reference, load charts supplied in the crane cab shall be used for lift planning.

9 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

LOAD CHARTS 360 DEGREE RATING - LOADS IN kg x 1000

MAIN BOOM with TRACKS FULLY EXTENDED ‐ 360°
UP TO 4° SLOPE ‐ NO TRAVEL
20.5 t MAIN COUNTERWEIGHT AND 9.1 t CARBODY COUNTERWEIGHT
RADIUS MAIN BOOM LENGTH (m) RADIUS

(m) 11.5 15.4 19.4 23.3 27.3 31.2 35.1 39.1 43 (m)
3 66.0 50.1 35.0 3
4 55.0 50.1 35.0 27.0 21.3 4
5 42.8 42.1 35.0 27.0 21.3 16.7 5
6 34.6 34.0 33.1 27.0 21.3 16.7 14.1 6
7 28.8 28.2 27.9 24.5 21.1 16.7 14.1 11.8 7
8 24.5 23.9 23.5 22.3 19.2 16.7 14.1 11.8 8.2 8
9 21.0 20.5 20.1 20.4 17.6 15.7 14.1 11.8 8.2 9
10 17.8 17.4 17.8 16.2 14.5 13.4 11.8 8.2 10
12 13.7 16.1 13.7 13.5 12.5 11.6 10.8 8.2 12
14 13.1 11.3 10.8 10.9 10.1 9.5 8.2 14
16 10.9 10.3 8.7 9.0 8.9 8.4 7.5 16
18 9.5 7.0 7.4 7.6 7.5 6.7 18
20 8.2 5.6 6.2 6.4 6.6 6.0 20
22 4.8 5.2 5.7 6.1 5.4 22
24 4.5 4.8 5.3 5.4 4.9 24
26 4.5 4.9 4.7 4.2 26
28 4.2 4.6 4.1 3.7 28
30 4.0 3.6 3.2 30
32 3.5 3.1 2.7 32
34 2.6 2.3 34
36 2.2 1.9 36
38 1.5 38
40 1.2 40
42 42
44 44
PARTS OF PARTS OF
12 8 8 6 6 4 4 4 2
LINE LINE

Load chart data is for reference, load charts supplied in the crane cab shall be used for lift planning.

10 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

LOAD CHARTS 360 DEGREE RATING - LOADS IN kg x 1000

MAIN BOOM with TRACKS RETRACTED OVER FRONT/REAR
UP TO 1.5° SLOPE ‐ NO TRAVEL
20.5 t MAIN COUNTERWEIGHT AND 9.1 t CARBODY COUNTERWEIGHT
RADIUS MAIN BOOM LENGTH (m) RADIUS

(m) 11.5 15.4 19.4 23.3 27.3 31.2 35.1 39.1 43 (m)
3 80.0 50.6 50.6 3
4 69.1 50.6 43.8 34.9 33.9 4
5 60.0 50.6 40.8 34.4 30.1 21.7 5
6 52.7 50.6 36.1 30.4 26.7 16.9 16.9 6
7 45.0 44.3 32.3 27.1 23.8 16.9 16.5 16.2 7
8 38.9 38.0 29.2 24.5 21.5 16.9 16.4 15.7 13.1 8
9 31.6 31.6 26.6 22.2 19.5 16.9 16.4 15.5 12.9 9
10 26.8 24.3 20.3 17.8 16.3 15.2 14.3 12.1 10
12 20.3 19.3 17.2 15.0 13.8 13.0 12.3 10.8 12
14 16.4 14.8 12.9 11.9 11.2 10.6 9.6 14
16 14.9 12.1 11.2 10.3 9.8 9.3 8.4 16
18 9.9 9.8 9.1 8.6 8.2 7.4 18
20 9.0 8.1 8.0 7.6 7.3 6.6 20
22 6.8 7.1 6.8 6.5 5.9 22
24 5.8 6.1 6.1 6.0 5.3 24
26 5.2 5.5 5.6 4.8 26
28 4.5 4.8 5.2 4.3 28
30 4.5 4.9 3.9 30
32 4.2 4.4 3.6 32
34 3.9 3.2 34
36 3.5 2.9 36
38 2.7 38
40 2.3 40
42 42
44 44
PARTS OF PARTS OF
12 8 8 6 6 4 4 4 2
LINE LINE

Load chart data is for reference, load charts supplied in the crane cab shall be used for lift planning.

11 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

LOAD CHARTS 360 DEGREE RATING - LOADS IN kg x 1000

MAIN BOOM with TRACKS RETRACTED ‐ OVER SIDE
UP TO 1.5° SLOPE ‐ NO TRAVEL
20.5 t MAIN COUNTERWEIGHT AND 9.1 t CARBODY COUNTERWEIGHT
RADIUS MAIN BOOM LENGTH (m) RADIUS

(m) 11.5 15.4 19.4 23.3 27.3 31.2 35.1 39.1 43 (m)
3 * * * 3
4 * * * * * 4
5 38.5 * * * * * 5
6 30.5 27.6 * * * * * 6
7 24.6 23.1 20.8 * * * * * 7
8 20.4 19.1 17.7 16.8 * * 15.2 14.8 13.1 8
9 17.4 17.8 16.8 15.2 13.8 13.7 13.4 13.1 12.8 9
10 15.4 15.6 14.9 12.1 12.0 11.9 11.8 11.5 10
12 12.0 12.2 12.3 9.4 9.5 9.9 10.1 9.3 12
14 9.8 9.9 7.6 8.1 8.8 8.4 7.7 14
16 8.1 8.2 6.7 7.3 7.7 7.0 6.4 16
18 6.9 6.0 6.5 6.4 5.9 5.3 18
20 5.9 5.4 5.7 5.4 4.9 4.5 20
22 5.0 4.8 4.6 4.1 3.7 22
24 4.5 4.1 3.9 3.4 3.0 24
26 3.6 3.3 2.8 2.4 26
28 3.1 2.8 2.3 2.0 28
30 2.4 1.9 1.5 30
32 2.1 1.6 1.2 32
34 1.3 0.9 34
36 1.0 * 36
38 * 38
40 * 40
42 42
44 44
PARTS OF PARTS OF
12 4 4 4 4 2 2 2 2
LINE LINE

Load chart data is for reference, load charts supplied in the crane cab shall be used for lift planning.

12 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

LOAD CHARTS 360 DEGREE RATING - LOADS IN kg x 1000

MAIN BOOM with TRACKS FULLY EXTENDED ‐ 360°
UP TO 1.5° SLOPE ‐ NO TRAVEL
0 t MAIN COUNTERWEIGHT AND 9.1 t CARBODY COUNTERWEIGHT
RADIUS MAIN BOOM LENGTH (m) RADIUS

(m) 11.5 15.4 19.4 23.3 27.3 31.2 35.1 39.1 43 (m)
3 74.1 50.6 50.6 3
4 47.7 39.6 33.8 30.2 27.2 4
5 34.6 29.3 25.4 23.2 21.2 20.2 5
6 26.8 22.8 19.9 18.4 17.0 16.5 15.8 6
7 20.6 18.4 16.4 15.3 14.0 13.7 14.0 13.7 7
8 16.5 17.0 16.4 15.3 12.1 12.6 13.1 11.8 10.7 8
9 13.5 14.1 14.4 13.9 11.1 11.6 11.5 10.3 9.3 9
10 11.9 12.2 12.2 10.2 10.7 10.1 9.1 8.2 10
12 8.8 9.1 9.3 8.7 8.7 8.0 7.1 6.3 12
14 7.0 7.2 7.3 7.0 6.5 5.7 5.0 14
16 5.6 5.8 5.9 5.6 5.3 4.5 3.9 16
18 4.7 4.8 4.5 4.2 3.6 3.0 18
20 3.8 3.9 3.6 3.4 2.9 2.4 20
22 3.3 3.0 2.7 2.2 1.8 22
24 2.7 2.4 2.2 1.7 1.3 24
26 2.0 1.7 1.2 * 26
28 1.6 1.3 0.8 * 28
30 1.0 * * 30
32 0.7 * * 32
34 * * 34
36 * * 36
38 * 38
40 * 40
42 42
44 44
PARTS OF PARTS OF
12 8 8 6 6 4 4 4 2
LINE LINE

Load chart data is for reference, load charts supplied in the crane cab shall be used for lift planning.

13 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

LOAD CHARTS 360 DEGREE RATING - LOADS IN kg x 1000

AUXILIARY NOSE SHEAVE with TRACKS FULLY EXTENDED ‐ 360°
UP TO 1.5° SLOPE ‐ NO TRAVEL
20.5 t MAIN COUNTERWEIGHT AND 9.1 t CARBODY COUNTERWEIGHT
RADIUS MAIN BOOM LENGTH (m) RADIUS

(m) 11.5 15.4 19.4 23.3 27.3 31.2 35.1 39.1 43 (m)
3 6.6 6.6 6.6 3
4 6.6 6.6 6.6 6.6 4
5 6.6 6.6 6.6 6.6 6.6 6.6 5
6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6
7 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 7
8 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 8
9 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 9
10 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 10
12 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 12
14 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 14
16 6.6 6.6 6.6 6.6 6.6 6.6 6.6 16
18 6.6 6.6 6.6 6.6 6.6 6.6 6.6 18
20 6.6 6.6 6.6 6.6 6.4 6.2 20
22 6.6 6.2 5.9 5.9 5.5 22
24 5.9 5.5 5.2 5.4 5.0 24
26 5.0 4.7 5.0 4.5 26
28 4.5 4.3 4.7 4.1 28
30 4.0 4.4 3.7 30
32 3.8 4.2 3.3 32
34 3.9 3.0 34
36 3.6 2.8 36
38 2.5 38
40 2.3 40
42 42
44 44
PARTS OF PARTS OF
1 1 1 1 1 1 1 1 1
LINE LINE

Load chart data is for reference, load charts supplied in the crane cab shall be used for lift planning.

14 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

LOAD CHARTS 360 DEGREE RATING - LOADS IN kg x 1000

2.5m JIB with TRACKS EXTENDED ‐ 360°
UP TO 1.5° SLOPE ‐ NO TRAVEL
20.5 t MAIN COUNTERWEIGHT AND 9.1 t CARBODY COUNTERWEIGHT
RADIUS MAIN BOOM LENGTH (m) RADIUS

(m) 11.5 31.2 35.1 39.1 43 (m)

3.5° 30° 3.5° 30° 3.5° 30° 3.5° 30° 3.5° 30°
3 21.4 16.6 3
4 20.1 15.9 4
5 18.9 15.4 5
6 18.0 15.0 13.3 6
7 17.3 14.8 12.2 11.7 12.6 7
8 16.6 14.6 11.1 10.7 11.6 11.0 11.8 ` 8
9 16.2 14.6 10.2 9.9 10.7 10.2 11.0 10.5 10.6 9
10 15.9 14.6 9.4 9.1 9.9 9.5 10.3 9.8 10.5 10.0 10
12 8.1 7.9 8.6 8.4 9.0 8.7 9.3 8.9 12
14 7.1 7.0 7.6 7.4 8.0 7.8 8.3 8.0 14
16 6.3 6.2 6.8 6.6 7.2 7.0 7.5 7.3 16
18 5.6 5.5 6.1 6.0 6.5 6.3 6.8 6.6 18
20 5.0 5.0 5.5 5.4 5.9 5.8 6.1 6.1 20
22 4.5 4.5 5.0 4.9 5.4 5.3 5.4 5.5 22
24 4.1 4.1 4.6 4.5 5.0 4.9 4.8 4.9 24
26 3.8 3.8 4.2 4.2 4.6 4.5 4.3 4.4 26
28 3.5 3.5 3.9 3.9 4.2 4.2 3.9 3.9 28
30 3.2 3.6 3.6 3.8 3.8 3.4 3.4 30
32 3.4 3.3 3.3 2.9 2.9 32
34 3.2 2.8 2.8 2.4 2.4 34
36 2.4 2.0 2.0 36
38 2.1 1.7 1.7 38
40 1.4 40
42 1.1 42
44 44
PARTS  PARTS 
OF 4 4 2 2 2 2 2 2 2 2 OF
LINE LINE

Load chart data is for reference, load charts supplied in the crane cab shall be used for lift planning.

15 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

LOAD CHARTS 360 DEGREE RATING - LOADS IN kg x 1000

10.1m JIB with TRACKS EXTENDED ‐ 360°
UP TO 1.5° SLOPE ‐ NO TRAVEL
20.5 t MAIN COUNTERWEIGHT AND 9.1 t CARBODY COUNTERWEIGHT
RADIUS MAIN BOOM LENGTH (m) RADIUS

(m) 12.8 31.2 35.1 39.1 43 (m)

3.5° 25° 45° 3.5° 25° 45° 3.5° 25° 45° 3.5° 25° 45° 3.5° 25° 45°
3 6.6 3
4 6.6 4
5 6.6 5
6 6.6 6
8 6.6 6.6 6.6 8
10 6.6 6.1 5.2 6.6 6.6 6.6 10
12 6.6 5.5 4.8 6.6 6.5 6.6 6.5 6.6 6.1 12
14 6.0 5.1 4.6 6.3 5.9 5.0 6.4 5.9 6.4 5.9 6.1 14
16 5.4 4.8 4.5 5.7 5.3 4.8 5.8 5.4 4.8 5.8 5.4 4.8 5.8 5.3 16
18 5.0 4.5 5.1 4.8 4.6 5.2 4.9 4.7 5.3 4.9 4.7 5.3 4.9 4.6 18
20 4.6 4.4 4.3 4.8 4.5 4.4 4.9 4.6 4.4 4.9 4.5 4.3 20
22 4.2 4.1 4.0 4.4 4.2 4.1 4.5 4.2 4.1 4.5 4.2 4.1 22
24 3.9 3.7 3.7 4.0 3.9 3.8 4.2 3.9 3.8 4.2 3.9 3.8 24
26 3.6 3.5 3.4 3.7 3.6 3.5 3.9 3.7 3.6 3.9 3.7 3.6 26
28 3.3 3.2 3.2 3.5 3.4 3.3 3.6 3.4 3.4 3.7 3.5 3.4 28
30 3.1 3.0 3.0 3.2 3.1 3.1 3.4 3.2 3.2 3.4 3.3 3.2 30
32 2.8 2.8 3.0 2.9 2.9 3.2 3.1 3.0 3.2 3.1 3.0 32
34 2.7 2.6 2.8 2.8 2.8 3.0 2.9 2.8 2.9 2.9 2.9 34
36 2.5 2.5 2.7 2.6 2.8 2.7 2.7 2.5 2.8 2.7 36
38 2.4 2.5 2.5 2.6 2.6 2.6 2.2 2.4 2.5 38
40 2.4 2.4 2.2 2.4 1.9 2.0 2.1 40
45 1.6 1.6 1.2 1.3 45
50 0.7 50

PARTS  PARTS 
OF 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 OF
LINE LINE

Load chart data is for reference, load charts supplied in the crane cab shall be used for lift planning.

16 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

LOAD CHARTS 360 DEGREE RATING - LOADS IN kg x 1000

17.7m JIB with TRACKS EXTENDED ‐ 360°
UP TO 1.5° SLOPE ‐ NO TRAVEL
20.5 t MAIN COUNTERWEIGHT AND 9.1 t CARBODY COUNTERWEIGHT
RADIUS MAIN BOOM LENGTH (m) RADIUS
(m) 12.8 31.2 35.1 39.1 43 (m)
3.5° 25° 45° 3.5° 25° 45° 3.5° 25° 45° 3.5° 25° 45° 3.5° 25° 45°
3 3
4 4
5 4.5 5
6 4.5 6
8 4.5 8
10 4.5 3.4 10
12 4.0 3.6 3.4 3.3 12
14 3.6 3.3 3.4 3.3 3.1 3.0 14
16 3.3 3.1 2.6 3.4 3.4 3.4 3.3 3.1 3.0 16
18 3.0 2.8 2.5 3.4 3.3 3.3 3.3 3.3 3.1 3.0 18
20 2.7 2.6 2.3 3.4 3.1 3.1 3.3 3.1 3.1 3.1 3.0 3.0 20
22 2.5 2.4 2.2 3.3 3.0 3.0 3.3 3.0 2.4 3.1 3.0 3.0 3.0 22
24 2.4 2.2 2.1 3.1 2.8 2.8 3.2 2.9 2.3 3.1 2.9 2.3 3.0 2.9 2.3 24
26 2.2 2.1 3.0 2.7 2.7 3.1 2.7 2.3 3.1 2.8 2.3 3.0 2.8 2.3 26
28 2.8 2.5 2.5 2.9 2.6 2.2 3.0 2.6 2.2 3.0 2.7 2.2 28
30 2.6 2.4 2.4 2.7 2.5 2.1 2.8 2.5 2.1 2.8 2.6 2.1 30
32 2.4 2.3 2.3 2.5 2.4 2.1 2.6 2.4 2.1 2.7 2.5 2.1 32
34 2.2 2.2 2.2 2.4 2.3 2.0 2.4 2.3 2.0 2.5 2.4 2.0 34
36 2.1 2.0 2.0 2.2 2.1 2.0 2.3 2.2 2.0 2.3 2.2 2.0 36
38 1.9 1.9 1.9 2.1 2.0 1.9 2.2 2.1 1.9 2.2 2.1 2.0 38
40 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 1.9 2.1 2.0 1.9 40
45 1.6 1.6 1.6 1.7 1.6 1.8 1.7 1.7 1.5 1.7 1.7 45
50 1.5 1.3 1.4 0.9 1.1 50
55 0.5 0.6 55
60 60
PARTS  PARTS 
OF 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 OF
LINE LINE

Load chart data is for reference, load charts supplied in the crane cab shall be used for lift planning.

17 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

WP750 WORK PLATFORM ON MAIN BOOM RANGE CHART

FOR MANTIS MODEL GTC-800
as originally manufactured and equipped by Tadano Mantis Corporation

Shaded Area is Allowable Operating Range

Limits of operation:
Maximum load capacity = 340kg
Maximum radius when mounted on main boom = 28m
Maximum occupancy = 2 persons

Notes:
1. It is permissible to leave the jibs stowed on the boom while operating with Work Platform mounted to the main boom.
2. The hook block(s) must be removed when using the Work Platform
3. Local applicability of the Work Platform option must be confirmed with Tadano sales prior to order.

WARNING: Lifting a load during Work Platform operation is not allowed.

WARNING: Travelling the crane with person(s) in the Work Platform is not allowed.

18 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

WP750 WORK PLATFORM ON 10.2 M EXTENSION RANGE CHART

FOR MANTIS MODEL GTC-800
as originally manufactured and equipped by Tadano Mantis Corporation

Shaded Area is Allowable Operating Range

Limits of operation:
Minimum boom angle when mounted on 10.2m extension at 0° offset = 0°
Minimum boom angle when mounted on 10.2m extension at 20°offset=20°
Minimum boom angle when mounted on 10.2m extension at 40°offset=40°
Maximum occupancy = 2 persons

Notes:
1. It is permissible to leave the jib section stowed on the boom while operating with Work Platform mounted to the 10.2m jib.
2. The hook block(s) must be removed when using the Work Platform
3. Local applicability of the Work Platform option must be confirmed with Tadano sales prior to order.

WARNING: Lifting a load during Work Platform operation is not allowed.

WARNING: Travelling the crane with person(s) in the Work Platform is not allowed.

19 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

PLEASE READ, UNDERSTAND, AND FOLLOW THE MANUALS FURNISHED WITH THE CRANE AS WELL AS THE CAPACITY
LIMITATIONS AND GENERAL CONDITIONS LISTED BELOW PRIOR TO OPERATION OF THE CRANE. FAILURE TO DO SO MAY
RESULT IN AN ACCIDENT.

Performance of this TADANO MANTIS crane as manufactured by Tadano Mantis Corporation applies only to machines as originally
equipped by the manufacturer and in a properly maintained condition. Capacities given are maximum covered by the manufacturer’s war-
ranty and are based on a freely suspended load with NO allowance for factors as out-of-level operation (beyond the limits specified on the
charts), supporting surface conditions, hazardous surroundings, experience of personnel, etc. The operator shall establish practical working
loads based on prevailing operating conditions, such as, but not limited to the above.

The lifting capacities in the structural area are based on DIN 15018 parts 2 and 3 and F.E.M.

The lifting capacities in the stability area are based on DIN 15019 part 2 / ISO 4305 / EN 13000.

Maximum admissible wind velocity for working with telescopic boom and jibs is 36 km/hr. Consult TADANO MANTIS for ratings at higher
wind speeds.

Side pull on boom is extremely dangerous and must be avoided.

DO NOT exceed manufacturers maximum specified reeving.

Boom angle/boom length relationships given are an approximation of the resulted load radius, which should be an accurate measurement.
Boom height dimensions are measured from ground to center of lower boom head sheave.

It is permissible to attempt to telescope boom with a load within the limits of rated capacities. However, boom angle system hydraulic pres-
sure, and/or boom lubrication may affect operation.

It is permissible to travel with loads within the rated capacity of the crane. Travel speeds should be greatly reduced to reflect terrain limita-
tions and minimize dynamic loads applied to the crane structure.

Lifting capacities are shown in metric tons.

The weight of load handling devices such as hook blocks, slings, etc., must be considered as part of the load and must be deducted from
the lifting capacities.

The lifting capacities for the telescopic boom apply to a crane with no jibs or other optional equipment stowed or mounted on the crane.

The working radius is the horizontal distance from the center of rotation to the center of the freely suspended, non-oscillating load.

The lifting capacities are subject to change without prior notice.

The above remarks are for basic information only and the operator’s manual must be consulted before operating this crane. All data and
performances refer to the standard crane. The addition of optional and other equipment may affect the performance of the crane.

Load moment indicating and anti-two block systems are operator aids and must never be used in lieu of job site lift planning calculations by
the operator which must take into account ground conditions, weather and all other environmental factors prevailing at the time of the lift.
Specifications are subject to change at any time without prior notice. Illustrations and photographs may show optional equipment. Super-
sedes all previous issues.

20 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

NOTES

21 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

NOTES

22 Specifications are subject to change without prior notice.

GTC-800
80t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. TMC-DI-734-10-12/16

NOTES

23 Specifications are subject to change without prior notice.

TADANO MANTIS CORPORATION
1705 Columbia Avenue • Franklin, TN 37064 USA • Toll-Free: 1-800-272-3325 • Fax: 615-790-6803 • mantiscranes.com

TADANO Ltd.,International Division

4-12, Kamezawa 2-chome,
Sumida-Ku, Tokyo 130-0014, Japan
Tel: +81 3 3621 7750
Fax: +81 3 3621 7785
E-mail: info@tadano.com
www.tadano.com SPECIFICATION SHEET NO. TMC-DI-734-10-12/16