Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 156 views

    Project: Sekolah Menengah Kebangsaan Gambang, Kuantan, Pahang Darul Makmur

    Uploaded by

    Hasifi Lotpi
    This document provides pile design calculations for three borehole locations (BH-1, BH-4, BH-3) at a school construction project in Kuantan, Pahang, Malaysia. The calculations use Meyerhof's formulas to determine the allowable working load (Pa) for 350mm diameter spun piles with a factor of safety of 2.5, based on soil properties and SPT blow counts at varying depths for each borehole. Pa is calculated by dividing the sum of skin friction (Ps) and end bearing (Pb) values by the factor of safety. Values of Pa range from 39.98 kN to 777.68 kN depending on the soil conditions at each borehole location and

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd

    Project: Sekolah Menengah Kebangsaan Gambang, Kuantan, Pahang Darul Makmur

    Uploaded by

    Hasifi Lotpi
    156 views3 pages
    This document provides pile design calculations for three borehole locations (BH-1, BH-4, BH-3) at a school construction project in Kuantan, Pahang, Malaysia. The calculations use Meyerhof's formulas to determine the allowable working load (Pa) for 350mm diameter spun piles with a factor of safety of 2.5, based on soil properties and SPT blow counts at varying depths for each borehole. Pa is calculated by dividing the sum of skin friction (Ps) and end bearing (Pb) values by the factor of safety. Values of Pa range from 39.98 kN to 777.68 kN depending on the soil conditions at each borehole location and

    Original Title

    PileLengthCalculation(GAMBANG)

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides pile design calculations for three borehole locations (BH-1, BH-4, BH-3) at a school construction project in Kuantan, Pahang, Malaysia. The calculations use Meyerhof's formulas to determine the allowable working load (Pa) for 350mm diameter spun piles with a factor of safety of 2.5, based on soil properties and SPT blow counts at varying depths for each borehole. Pa is calculated by dividing the sum of skin friction (Ps) and end bearing (Pb) values by the factor of safety. Values of Pa range from 39.98 kN to 777.68 kN depending on the soil conditions at each borehole location and

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    156 views3 pages

    Project: Sekolah Menengah Kebangsaan Gambang, Kuantan, Pahang Darul Makmur

    Uploaded by

    Hasifi Lotpi
    This document provides pile design calculations for three borehole locations (BH-1, BH-4, BH-3) at a school construction project in Kuantan, Pahang, Malaysia. The calculations use Meyerhof's formulas to determine the allowable working load (Pa) for 350mm diameter spun piles with a factor of safety of 2.5, based on soil properties and SPT blow counts at varying depths for each borehole. Pa is calculated by dividing the sum of skin friction (Ps) and end bearing (Pb) values by the factor of safety. Values of Pa range from 39.98 kN to 777.68 kN depending on the soil conditions at each borehole location and

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 3
    At a glance
    Powered by AI
    The document discusses pile capacity calculations for several foundation projects using borehole data and Meyerhof's formulae.

    Silt and sand soils were found in the boreholes based on the SPT values reported.

    Meyerhof's formulae for skin friction (Ps) and end bearing (Pb) were used to calculate the pile capacity (Pu).

    PROJECT : SEKOLAH MENENGAH KEBANGSAAN GAMBANG, KUANTAN, PAHANG DARUL MAKMUR

    CLIENT : KEMENTERIAN PELAJARAN MALAYSIA

    PILE SIZE : 350 mm Spun Pile = 0.35 m

    Factor of Safety(F.S) , skin friction : 2.5


    end bearing : 2.5

    Meyerhof's Formulae

    Ps = k1 x Nav x As k1 k2 Nav (N1+N2)/2


    Pb = k2 x Nb x Ab SAND 2 400 As VARIABLE (concrete skin area)
    Pu = Sum Ps + Pb SILT 1.7 250 Ab 0.096211 (base concrete area)
    Pa = Pu / F.S CLAY 3 150

    Calculation for the allowable working load (Pa) in kN F.S = 2.5

    Borehole No : BH-1

    Depth Soil k1 k2 As SPT SPT Ps SUM Ps Pb Pu Pa


    (m) Type N or Nb Nav

    0 SILT 1.7 250 0.000 0 0.0 0.00 0.00 0.00 0.00 0.00
    1.00 SILT 1.7 250 1.100 4 2.0 3.74 3.74 96.21 99.95 39.98
    2.00 SILT 1.7 250 1.100 6 5.0 9.35 13.09 144.32 157.40 62.96
    3.00 SILT 1.7 250 1.100 13 9.5 17.76 30.85 312.69 343.53 137.41
    4.00 SILT 1.7 250 1.100 14 13.5 25.24 56.08 336.74 392.82 157.13
    5.00 SILT 1.7 250 1.100 35 24.5 45.80 101.89 841.85 943.74 377.49
    6.00 SAND 2.0 400 1.100 9 22.0 48.39 150.27 346.36 496.63 198.65
    7.50 SAND 2.0 400 1.650 12 10.5 34.64 184.91 461.81 646.73 258.69
    9.00 SAND 2.0 400 1.650 13 12.5 41.24 226.15 500.30 726.45 290.58
    10.50 SAND 2.0 400 1.650 13 13.0 42.89 269.04 500.30 769.34 307.74
    12.00 SILT 1.7 250 1.650 20 16.5 46.27 315.31 481.06 796.37 318.55
    13.50 SILT 1.7 250 1.650 17 18.5 51.88 367.19 408.90 776.09 310.44
    15.00 SILT 1.7 250 1.650 50 33.5 93.94 461.13 1202.64 1663.77 665.51
    16.50 SILT 1.7 250 1.650 50 50.0 140.21 601.34 1202.64 1803.98 721.59
    18.00 SILT 1.7 250 1.650 50 50.0 140.21 741.56 1202.64 1944.20 777.68
    PROJECT : GOMBAK SQUARE DEVELOPMENT
    JOB NO : 24281
    CLIENT : DATA KINETICS SDN BHD

    PILE SIZE : 350 mm Spun Pile = 0.35 m

    Factor of Safety(F.S) , skin friction : 2.5


    end bearing : 2.5

    Meyerhof's Formulae

    Ps = k1 x Nav x As k1 k2 Nav (N1+N2)/2


    Pb = k2 x Nb x Ab SAND 2 400 As VARIABLE (concrete skin area)
    Pu = Sum Ps + Pb SILT 1.7 250 Ab 0.096211 (base concrete area)
    Pa = Pu / F.S CLAY 3 150

    Calculation for the allowable working load (Pa) in kN F.S = 2.5

    Borehole No : BH-4

    Depth Soil k1 k2 As SPT SPT Ps SUM Ps Pb Pu Pa


    (m) Type N or Nb Nav

    0 SILT 1.7 250 0.000 0 0.0 0.00 0.00 0.00 0.00 0.00
    1.00 SILT 1.7 250 1.100 4 2.0 3.74 3.74 96.21 99.95 39.98
    2.00 SILT 1.7 250 1.100 4 4.0 7.48 11.22 96.21 107.43 42.97
    3.00 SILT 1.7 250 1.100 30 17.0 31.78 43.00 721.58 764.58 305.83
    4.00 SILT 1.7 250 1.100 10 20.0 37.39 80.39 240.53 320.92 128.37
    5.00 SILT 1.7 250 1.100 11 10.5 19.63 100.02 264.58 364.60 145.84
    6.00 SILT 1.7 250 1.100 11 11.0 20.56 120.58 264.58 385.16 154.07
    7.50 SILT 1.7 250 1.650 13 12.0 33.65 154.23 312.69 466.92 186.77
    9.00 SILT 1.7 250 1.650 9 11.0 30.85 185.08 216.48 401.55 160.62
    10.50 SILT 1.7 250 1.650 10 9.5 26.64 211.72 240.53 452.25 180.90
    12.00 SILT 1.7 250 1.650 18 14.0 39.26 250.98 432.95 683.93 273.57
    13.50 SILT 1.7 250 1.650 21 19.5 54.68 305.66 505.11 810.77 324.31
    15.00 SILT 1.7 250 1.650 50 35.5 99.55 405.21 1202.64 1607.85 643.14
    16.50 SILT 1.7 250 1.650 50 50.0 140.21 545.42 1202.64 1748.06 699.23
    18.00 SILT 1.7 250 1.650 50 50.0 140.21 685.64 1202.64 1888.28 755.31
    PROJECT : SEKOLAH MENENGAH KEBANGSAAN GAMBANG, KUANTAN, PAHANG DARUL MAKMUR

    CLIENT : KEMENTERIAN PELAJARAN MALAYSIA

    PILE SIZE : 350 mm Spun Pile = 0.35 m based on ICP high strength concrete spun pile,
    recommended maximum structural axial working
    Factor of Safety(F.S) , skin friction : 2.5 load for 300 mm dia, is 850 kN
    end bearing : 2.5

    Meyerhof's Formulae

    Ps = k1 x Nav x As k1 k2 Nav (N1+N2)/2


    Pb = k2 x Nb x Ab SAND 2 400 As VARIABLE (concrete skin area)
    Pu = Sum Ps + Pb SILT 1.7 250 Ab 0.0962113 (base concrete area)
    Pa = Pu / F.S CLAY 3 150

    Calculation for the allowable working load (Pa) in kN F.S = 2.5

    Borehole No : BH-3

    Depth Soil k1 k2 As SPT SPT Ps SUM Ps Pb Pu Pa


    (m) Type N or Nb Nav

    0 SILT 1.7 250 0.000 0 0.0 0.00 0.00 0.00 0.00 0.00
    1.00 SILT 1.7 250 1.100 4 2.0 3.74 3.74 96.21 99.95 39.98
    2.00 SILT 1.7 250 1.100 6 5.0 9.35 13.09 144.32 157.40 62.96
    3.00 SILT 1.7 250 1.100 30 18.0 33.65 46.74 721.58 768.32 307.33
    4.00 SILT 1.7 250 1.100 5 17.5 32.72 79.45 120.26 199.72 79.89
    5.00 SILT 1.7 250 1.100 10 7.5 14.02 93.47 240.53 334.00 133.60
    6.00 SILT 1.7 250 1.100 12 11.0 20.56 114.04 288.63 402.67 161.07
    7.50 SILT 1.7 250 1.650 11 11.5 32.25 146.29 264.58 410.87 164.35
    9.00 SILT 1.7 250 1.650 10 10.5 29.44 175.73 240.53 416.26 166.50
    10.50 SILT 1.7 250 1.650 11 10.5 29.44 205.18 264.58 469.76 187.90
    12.00 SILT 1.7 250 1.650 13 12.0 33.65 238.83 312.69 551.51 220.61
    13.50 SILT 1.7 250 1.650 14 13.5 37.86 276.68 336.74 613.42 245.37
    15.00 SILT 1.7 250 1.650 16 15.0 42.06 318.75 384.85 703.59 281.44
    16.50 SILT 1.7 250 1.650 50 33.0 92.54 411.29 1202.64 1613.93 645.57
    18.00 SILT 1.7 250 1.650 50 50.0 140.21 551.50 1202.64 1754.14 701.66

    You might also like