TCL

SERVICE MANUAL

T-68T17

1. Caution……………………………………………………………2

2. Specification………………………………………………………6

3. BOM List ……………………… …………………………………9

4. Alignment Procedure…………………………………………….36

5. Block Diagram……………………………………………………40

6. Schematic Diagram……………………………………………….41

7. PCB Layout………….……………………………………………..42

8. Explode View Diagram…………………………………………….44

This manual is the latest at the time of printing, and does not
include the modification which may be made after the printing, by
the constant improvement of product.
CAUTION:
Use of controls, adjustments or procedures other than those specified herein may result in
hazardous radiation exposure.

CA UTION: TO REDUCE THE RISK OF

CAUTION ELECTRICAL SHOCK, DO NOT REMOVE
RISK OF ELECTRIC
ELECTRIC COVER (OR BACK). NO USER SERVICEABLE
SHOCK DO NOT OPEN. PARTS INSIDE. REFER SER VICING TO
QUALIFIED SERVICE PERSONNEL.

The lighting flash with arrowhead symbol, with an equilateral triangle is intended to
alert the user to the presence of uninsulated dangerous voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
the person.

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.

WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

2
 IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
Read all of these instructions. Save these instructions for later use. Follow all Warnings and
Instructions marked on the audio equipment.
1. Read Instructions- All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions- The safety and operating instructions should be retained for future reference.
3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions- All operating and use instructions should be followed.

FOR YOUR PERSONAL SAFETY

1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to
traffic or abuse. This may result in a shock or fire hazard.
4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.
6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet
and refer servicing to qualified service personnel.
7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.
9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury
to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the
manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and
should use a mounting kit approved by the manufacturer.
10.2. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.

3
PROTECTION AND LOCATION OF YOUR SET
11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, etc.
Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall
outlet and refer servicing to qualified service personnel.
12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.
13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.
14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to
protect it from overheating. These openings must not be blocked or covered.
Never cover the slots or openings with cloth or other material.
Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc.
Never place the set near or over a radiator or heat register.
Never place the set in a built-in enclosure, unless proper ventilation is provided.

PROTECTION AND LOCATION OF YOUR SET

15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No.
70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
to grounding electrode, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

ANTENNA
LEAD- IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE
UNIT (NEC SECTION
810-20)

GROUNDING
CONDUCTORS
ELECTRIC SERVICE (NEC SECTION 810-21)
EQUIPMENT

GROUND CLAMPS

POWER SERVICE GROUNDING

NEC-NATIONAL ELECTRICAL CODE ELECTRODE SYSTEM
(NEC ART 250. PART H)

15.2. Note to CATV system installer : (Only for the television set with CATV reception)
This reminder is provided to call the CATV system installer s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning
and power-line surges.

4
OPERATION OF YOUR SET
18. This television set should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supply at your home, consult your television dealer or local power company. For television
sets designed to operate from battery power, refer to the operating instructions.
19. If the television set does not operate normally by following the operating instructions, unplug this television set from the
wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating
instructions as improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the television set to normal operation.
20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on
a holiday, turn the television set off and unplug the television set from the wall outlet.

IF THE SET DOES NOT OPERATE PROPERLY

21. If you are unable to restore normal operation by following the detailed procedure in your operating instructions,
do not attempt any further adjustment. Unplug the set and call your dealer or service technician.
22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for
service, unplug the set and have it checked by a professional service technician.
23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being
turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your
dealer or service technician.

FOR SERVICE AND MODIFICATION

24. Do not use attachments not recommended by the television set manufacturer as they may cause hazards.
25. When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
26. Upon completion of any service or repairs to the television set, ask the service technician to perform
routine safety checks to determine that the television is in safe operating condition.

5
 PFS2 FORMAT-1 Report
Date:2004-9-23 16:08
ProductView......:
Report by............: Product:
Specs / Products T-68T17
MasterData
Customer Id TCL ELECTRONICS AUSTRALIA
PTY LTD.
Version 0.1
Status MURADI
Brand TCL
EAN \
UPC \
Reception
+Tuning - presets/channels 100
+Tuning - technology PLL
+Tuning - Indication
+Freq Bands HYPER BAND
+Channels CATV 470MHz
+IF Freq PICTURE 38.9MHz
+TV Systems Off Air PAL B/G
+Add Systems Ext In NTSC 3.58, NTSC 4.43, NTSC Play
Back, PAL 60
+TV Systems Multi PAL
+Sound Systems AV Stereo
Picture - Processing
+Scan Standard
+Scan Modes 4;3
+Wide Screen Switching
+Combfilter
+Picture Control Brightness, Colour, Contrast, Color
Temperature, Hue, Sharpness Cont
Var, Smart Pict. 4 Modes
+Pict Enhancement Black Stretch
+Pict Noise Reduction NR
Picture - Display
+Display Type DV - CRT - RF
+Screen Format 4:3
+Size(Visual)" - size/vis. cm 29"
+Deflection System (CRT only)
+Tube Technology (CRT only) Black Matrix, Iron
+CRT Defl
+CRT Gun Stand Gun
+CRT Magn field
+Resolution
+Coating (only for D.V. sets)
+White Point
Sound
+RMS Power Intern
+RMS Power Extern
+Surround Sound
+Sound Features Mute
+Sound Control Volume
Sound - Speakers
+Speaker configuration 2 Speakers
+Speakers used Normal
+Speaker Size
User Interface
+Interface Name L01- Full Interface
+Voice Control
+Menu Cursor Control
+Menu Colours
+Menu Languages English
+Special Features Program preengage/soft start
/ Build-in Game / Hotel Lock /
Channel Edit / Calendar/
Notebook/Favorite channel /
+Operational Features Alternate Channel
+PP Features
+Tuning/Install Features Auto Store, Factory Mode, Fine
Tuning, Manual Search/Store,
Manual Sort, Service Mode
+Clock/Timer Functions Clock, On/off timer, Sleep timer
+Local Controls Front Channel +-, Volume +-,
TV/AV,MENU,
Power Switch,

2004-9-23 16:11 29T17 PFS 1 of 3

 Date:2004-9-23 16:08
ProductView......:
Report by............: Product:
Specs / Products T-68T17
+Local Controls Top
+Indicators - screen
+Indicators - front RC Recvd LED, SB LED
+Numb of Loc Cont (incl Mains) 7
+Number of Ind. (incl Mains) 1
+Local Controls (Old)
Remote Control
Connectors Rear
+Scart RGB+Y/C+CVBS
+Scart RGB+CVBS
+Scart CVBS+Y/C
+Component In (Y/U/V) Cinch X
+In Y/C+Cinch(CVBS+St) X
+In Y/C+Cinch(CVBS+Mo)
+In Y/C+Cinch(St)
+In BNC (CVBS)
+In Cinch(CVBS+St)
+In Cinch(CVBS+Mo)
+Out Cinch(CVBS+St) X
+Out Cinch(CVBS+Mo)
+Out Cinch Audio Stereo
+Out Cinch Audio Mono
+Out Cinch Dolby Surround
+Out Cinch Subwoofer
+Dig Audio Out
+Loudspeakers
+Control Busses
+Feature Slot
+ITV Smart Port
+Terr. Antenna in 75 Ohms (IEC type)
Guide + IR Blaster Jack
Connectors Front
+In Y/C + Cinch(CVBS+St)
+In Y/C + Cinch Stereo
+In Cinch (CVBS + St)
+In Cinch (CVBS+Mo +St)
+Headphone Out
+Feature Slot
Connectors Side
+In Y/C + Cinch(CVBS+St)
+In Y/C + Cinch Stereo
+In Cinch (CVBS + St+ Mo) x
+IN Cinch (CVBS + Mo)
+Headphone Out
Connectors Top
+In Cinch (CVBS + St)
+Headphone Out
Connectors Mechanical
+Headphone
+Cinch A/V in/out
+Cinch Component
+Cinch Y/C
Styling
+Cabinet Name 29T17
+Configuration
+Graphics/Logo's
-Cabinet Colour and Finish
Silver Frost
+Mechanics
+Speaker Visibility Standard
General
+Segment Standard 4:3
+Chassis M113
+Software Delivery Mode
+Software Version
+Mains Voltage 240V
+Mains Frequency 50Hz
+Type Mains Cord SAA
Power Consumption (P)TV in On
Power Consumption SB in Watts Less than 3W
Power Consumption Semi SB in W
+Power in "ON" for

2004-9-23 16:11 29T17 PFS 2 of 3

 Date:2004-9-23 16:08
ProductView......:
Report by............: Product:
Specs / Products T-68T17
+Power in Standby for
+Power in "OFF" for
Weight (P)TV (incl. Packaging)
Weight (P)TV (excl. Package)
Weight AVUnit excl Packaging
+INDICATION on BACKCOVER
+Channel
Final Equipment
+Packaging - methods
+Documents and manuals
+Languages DFU
+Cables Supplied
+Antenna Supplied
+Stand Supplied
+Aux Equipm Supplied
Packaging - width cm
Packaging - height cm
Packaging - depth cm
Miscellaneous
+EAN Indication
+Approbation EMC , CB
+Tests
+Local Integration
Various Perf. Param.
+Service Call-Rate
PIP/POP
+Type
+Features No
Digital Reception
+Transmission
Built-in Data System
+Text Standard
+(Tele)text Features No
+Nbr bckgrnd page / Mem Size No
+Text Technology No
+Digital Data handling
+Program Guide
Built-in Clock/Timer
+Type
+Features
Built-in Radio
+Type
Built-in PC display
+PC Synch
+PC Control
Built-in DVD drive
+Type of Medium
+Type of Deck
+Version of Deck
Phased Out Items
+Tuner/Frontend
+Sensitivity
+CRT EHT
+Lightning Protection
+Account
+XX(Radio Antenna in)
+Non Volatile Memory
+In Y/C + Cinch(CVBS+Mo)
Version of deck

2004-9-23 16:11 29T17 PFS 3 of 3

 Item No. Description Quantity Req. Designator Remarks
08-00029E-CR7 ASS'Y - CRT BD 1
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D501
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 L501 FOR "+" TO P1/P503
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D502
11-A562TM-0BX TRANSISTOR 2SA562TM-0 1 Q507
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q502
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q504
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q506
11-SC4544-0AX TRANSISTOR 2SC4544 1 Q501
11-SC4544-0AX TRANSISTOR 2SC4544 1 Q503
11-SC4544-0AX TRANSISTOR 2SC4544 1 Q505
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R515
18-CB0272-JNX RES. C.F. 2.7k OHM 1/6W +/-5% 1 R514
18-CB0561-JNX RES. C.F. 560 OHM 1/6W +/-5% 1 R501
18-CB0561-JNX RES. C.F. 560 OHM 1/6W +/-5% 1 R505
18-CB0561-JNX RES. C.F. 560 OHM 1/6W +/-5% 1 R510
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R502
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R506
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R509
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R522
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R503
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R508
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R513
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R511
18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R519
18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R520
18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R521
18-FG0183-JHX RES. M.O. 18K OHM 2W +/-5% 1 R516
18-FG0183-JHX RES. M.O. 18K OHM 2W +/-5% 1 R517
18-FG0183-JHX RES. M.O. 18K OHM 2W +/-5% 1 R518
25-BCB471-M1X CAP. ELEC 470 UF 16V +/-20% 1 C506
25-BLA100-M1X CAP. ELEC 10 UF 250V +/-20% 1 C504
26-AMK102-KRX CAP. CER 1000 pF 2KV +/-10% R 1 C505
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C508
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C509

9
 Item No. Description Quantity Req. Designator Remarks
26-EBP391-JCX CAP. CER. 390PF 50V +/-5% CH 1 C502
26-EBP391-JCX CAP. CER. 390PF 50V +/-5% CH 1 C501
26-EBP471-JCX CAP. CER 470PF 50V +/-5% CH 1 C503
34-R100K2-1BX COIL CHOKE 10 UH +/-10% 1 L502
35-237250-00X FERR. BEAD HF70 4.5X5.0 2 FOR C508 (L505 & L506)
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 L504
34-R100K2-1BX COIL CHOKE 10 UH +/-10% 1 L503
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R504
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R507
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R512
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J503
46-10967W-01X PIN BASE *1 TJC1-1A 1 P501 FOR CRT GROUNDING HOUS.
46-30615H-04X HS 4P24 460 F/W TJC3-4Y/SCN-4 1 P502 FOR M.BD P421
46-37030H-05X HS 5P 2468#24 450 TJC3-5Y/SCN 1 P503 FOR M.BD P201
47-CRT004-XX0 CRT SOCKET GZS10-2-AC2 1 S501
40-02501C-CRH1X P.C.B CRT BD 1
08-00029E-PWY ASS'Y - POWER PARTS 1
10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D802
10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D833
10-0RU3AM-F0X DIODE RU3AM (FAST RECOVERY) 1 D831
10-0RU3YX-F0X DIODE RU3YX (FAST RECTIFIER) 1 D830
10-1N4001-EBX DIODE 1N4001 (RECTIFIER) 1 D836
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D804
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D805
10-79C12V-DBX DIODE ZENER 12V 1/2W 5% 1 D838
10-79C8V2-DBX DIODE ZENER 8V2 1/2W 5% 1 D841
10-HER108-FBX DIODE HER108 1 D806
10-HS5V6B-DBX DIODE 500mW 5.6HSB 1 D840
11-C124ES-0BX TRANSISTOR PDTC124ES (NPN) 1 Q834
11-C124ES-0BX TRANSISTOR PDTC124ES (NPN) 1 Q833
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q831
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q832
11-SC2688-LAX TRANSISTOR 2SC2688L (NPN) 1 Q830
11-SK2996-0AX TRANSISTOR 2SK2996 (MOS) 1 Q801
13-00KA78-09S IC KA7809 9V 1A (REGULATOR) 1 IC803

10
 Item No. Description Quantity Req. Designator Remarks
13-00TLP6-21P PHOTO COUPLER TLP621(GRH) 1 IC802
13-44608P-40P IC MC44608P40 1 IC801
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R809
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R844
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R835A
18-CB0332-JNX RES. C.F. 3.3k OHM 1/6W +/-5% 1 R834
18-CB0333-JNX RES. C.F. 33K OHM 1/6W +/-5% 1 R838
18-CB0392-JNX RES. C.F. 3.9K OHM 1/6W +/-5% 1 R807
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 R807A
18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R806
18-CD0103-JNX RES. C.F. 10K OHM 1/4W +/-5% 1 R820
18-CD0220-JNX RES. C.F. 22 OHM 1/4W +/-5% 1 R811A
18-CD0221-JNX RES. C.F. 220 OHM 1/4W +/-5% 1 R833
18-CD0471-JNX RES. C.F. 470 OHM 1/4W +/-5% 1 R811
18-CE0479-JNX RES. C.F. 4.7 OHM 1/2W +/-5% 1 R832
18-DD0104-FNX RES. M.F. 0.1M OHM 1/4W +/-1% 1 R804
18-DD0472-FNX RES. M.F. 4.7K OHM 1/4W +/-1% 1 R804A
18-DE0823-FNX RES. M.F. 82K OHM 1/2W +/-1% 1 R831
18-FG0223-JHX RES. M.O. 22K OHM 2W +/-5% 1 R839
18-FG0333-JHX RES. M.O. 33K OHM 2W +/-5% 1 R837
18-KE0105-JN3 RES. H.VOLT. CC 1M OHM 1/2W +/-5% 1 R805
18-KF0825-JH3 RES. H.VOLT.CC 8.2M OHM 1W +/-5% 1 R812A
20-TR502H-5CX TRIMMER B5K HORIZ TYPE 1 VR829
22-NTC479-XX0 NTC 4.7 OHM +/-18% NTC4.7D2-14 1 RT802
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C812
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C849
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C845
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C863
25-BEA102-M1X CAP. ELEC 1000 UF 35V +/-20% 1 C832
25-BEB101-M1X CAP. ELEC 100 UF 35V +/-20% 1 C840
25-BJG221-M1X CAP. ELEC 220 UF 160V +/-20% 1 C835
26-AGK221-KRX CAP. CER 220 PF 250V +/-10% 1 C830
26-AIM103-KBX CAP. CER 0.01UF 500V +/-10% B 1 C805
26-AIM103-KBX CAP. CER 0.01UF 500V +/-10% B 1 C834
26-AKK221-KRX CAP. CER 220 PF 1KV +/-10% R 1 C833

11
 Item No. Description Quantity Req. Designator Remarks
26-AMK152-KRX CAP. CER 1500 pF 2KV +/-10% R 1 C818
26-AMK331-JZX CAP. CER 330 pF 2KV +/-5% SL 1 C817
26-APK222-ME4 CAP. CER 2200PF 400VAC+/-20% E 1 C816
26-AQK472-ZFX CAP. CER 4700PF 250VAC+80-20%F 1 C807
26-AQK472-ZFX CAP. CER 4700PF 250VAC+80-20%F 1 C808
26-EBP101-JCX CAP. CER 100PF 50V +/-5% CH 1 C814
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C804A
27-AQT224-MVH CAP. M.PP 0.22 UF 275VAC 20% 1 C801
27-AQT224-MVH CAP. M.PP 0.22 UF 275VAC 20% 1 C802
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C820
27-MHM104-K0X CAP. METAL P.E. 0.1UF 400V 10% 1 C802A
34-R101K2-1BX COIL CHOKE 100 UH +/-10% 1 L801
34-R101K2-1BX COIL CHOKE 100 UH +/-10% 1 L802
35-237250-00X FERR. BEAD HF70 4.5X5.0 2 FOR D806
35-237250-00X FERR. BEAD HF70 4.5X5.0 2 FOR D804
36-LIF005-XX0 LINE FILTER LCL-2826 1 T801
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J815
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J802F
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J818
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J804
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J814
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J802G
41-WJ0125-B00 WIRE BARE JUMPER 12.5MM 1 J816
41-WJ0125-B00 WIRE BARE JUMPER 12.5MM 1 J817
41-WJ0130-B00 WIRE BARE JUMPER 13MM 1 J803
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 J809
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 J810
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 J812
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 J811
41-WJ0175-B00 WIRE BARE JUMPER 17.5MM 1 J813
41-WJ0195-B00 WIRE BARE JUMPER 19.5MM 1 J806
46-10962W-02X PIN BASE *2 TJC2-2A 1 S803 FOR DEGAUSSING COIL
46-28559W-02X PIN BASE *2 TJC1-2A 1 S801
64-B30100-104 M/C SCREW B 3 X 10 1 FOR Q801
64-P30080-104 M/C SCREW P 3 X 8 2 FOR IC803 & IC804

12
 Item No. Description Quantity Req. Designator Remarks
66-20516X-0B0 FUSE HOLDER 2 FOR F801
66-343730-0B0 HOLLOW RIVET 1.6X3.0XL3.2 4 FOR T801
66-343730-0B0 HOLLOW RIVET 1.6X3.0XL3.2 4 FOR T803
66-343730-0B0 HOLLOW RIVET 1.6X3.0XL3.2 4 FOR C801,C802
66-343730-0B0 HOLLOW RIVET 1.6X3.0XL3.2 2 FOR D830
66-343730-0B0 HOLLOW RIVET 1.6X3.0XL3.2 2 FOR C835
66-382330-0B7 RIVET 2.0X3.7X3.5 4 FOR R808 & R836
67-H27292-3A0 HEAT SINK 2 FOR IC803 & IC804
67-H35984-2A0 HEAT SINK 1 FOR Q801
71-DYP000-WX1 LABEL 1 STICK ON HEAT SINK
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J805
18-DD0392-FNX RES. M.F. 3.9K OHM 1/4W +/-1% 1 R835
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 R840
26-APK471-KB4 CAP. CER 470 pF 400VAC +/-10% 1 C803
26-APK471-KB4 CAP. CER 470 pF 400VAC +/-10% 1 C804
36-TRF046-AX1 TRANSFORMER CONV. 1 T803
35-LB1005-0IX FERR BEAD H75 (3.5X1X5) 1 L816
18-RG0228-JHX RES. WIRE ROUND 0.22 OHM 2W +/-5% 1 R810
26-EBP221-JCX CAP. CER 220PF 50V +/-5% CH 1 C841
35-237250-00X FERR. BEAD HF70 4.5X5.0 1 L812(FOR D833)
35-237250-00X FERR. BEAD HF70 4.5X5.0 1 L813(FOR D833)
35-139730-00X FERR. BEAD BF60 1 L814(FOR D831)
35-139730-00X FERR. BEAD BF60 1 L815(FOR D831)
35-237250-00X FERR. BEAD HF70 4.5X5.0 1 L810(FOR D830)
35-237250-00X FERR. BEAD HF70 4.5X5.0 1 L811(FOR D830)
27-RJP472-J0X CAP. PP 4700 PF 630V +/-5% 1 C809
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C842
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C831
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C813
22-PTC200-XX0 POSISTOR 20 OHM (25-34) 1 RT801
18-GJ0223-KUX1 RES.C.C.5W 22KOHM +/-10 1 R808
18-GJ0103-KUX1 RES.C.C.5W 10KOHM +/-10% 1 R836
41-WJ0195-B00 WIRE BARE JUMPER 19.5MM 1 J807
13-L7805C-VAP IC L7805CV 1.5A (REGULATOR) 1 IC804
25-BDA471-M1X CAP. ELEC 470 UF 25V +/-20% 1 C843

13
 Item No. Description Quantity Req. Designator Remarks
66-343730-0B0 HOLLOW RIVET 1.6X3.0XL3.2 5 FOR L801,FOR RT801
66-343730-0B0 HOLLOW RIVET 1.6X3.0XL3.2 4 FOR DB801
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C844
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C846
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C864
18-FE0102-JNX RES. M.O. 1K OHM 1/2W +/-5% 1 R803
25-BDB101-M1X CAP. ELEC 100 UF 25V +/-20% 1 C861
10-D3SB60-H7X DIODE D3SB60 (BRIDGE RECT.) 1 DB801
08-29T17E-FCN ASS'Y - FRONT CABINET 1
42-61308F-XX2 SPEAKER 8 OHM 8W 1 SP601
42-61308F-XX2 SPEAKER 8 OHM 8W 1 SP602
44-29OFLS-FD8A CRT 73SX731Y22-DC04 1 CRT01
46-14026H-02X HS 2P 2468#22 570mm S11-2Y/7mm 1 P601H FOR M.BD P601
46-35197H-02X HS 2P22 700/7 TJC3-2Y 1 P602H FOR M.BD P602
59-130460-00X RUBBER PAD (25mmX7mm) 2 FOR FRONT CABINT FOOTING
59-312160-000 SPEAKER RUBBER CUSHION 8 FOR SPEAKER
63-B30080-AB4 S/T SCREW B 3 X 8 AB 2 MTG IR BD & PANEL
63-Z30100-AB4 S/T SCREW 3.0 X 10 2 MTG SWITCH BD
63-W30140-HS4 S/T SCREW W 3 X 14 HS 8 MTG SPEAKER
36-DEG290-XX2 DEGAUSSING COIL 3100MM 1
02-GND029-XX0 ASS"Y-CRT GND WIRE & HOUS.(29) 1
54-314740-0X0 CRT FIBRE SHEET (22mmX22mmX0.8mm) 8 MTG CRT & FRONT.CAB
54-205140-000 SPACER CRT MOUNTING T=2MM 4 MTG CRT & FRONT.CAB
56-C276LS-0HC LENS 1
63-W30100-AB4 S/T SCREW W 3 X 10 AB 1 MTG LENS & FRONT.CAB
63-W30100-AB4 S/T SCREW W 3 X 10 AB 2 MTG PUSH BUTTON & FRONT.CAB
63-W30100-AB4 S/T SCREW W 3 X 10 AB 2 MTG LIGHT LENS & FRONT.CAB
63-B30060-BT4 S/T SCREW B 3 X 6 BT 2 MTG SIDE AV PCB & FRONT.CAB
65-A60200-20E WASHER 6 X 20 X 2MM 4 MTG CRT & FRONT.CAB
67-X21679-0E0 SPRING CRT 6mmX50mmX0.6mm 2 FOR CRT
67-X41381-0E2 POWER KNOB SPRING 1
62-262660-0HN POWER SW.ADAPTER 1
63-B40150-AB4 S/T SCREW B 4 X 15 AB 12 MTG CRT SUPPORTER & FRONT.CAB
67-313820-2E0 CRT BRACKET (RCA CRT) 4 MTG TO FRONT.CAB
46-26514H-04X HS 4P A/B 500/13 RBGW TJC1-4Y 1

14
 Item No. Description Quantity Req. Designator Remarks
55-BT17FC-0AN FRONT CABINET 1
56-BT18FB-0HA PUSH BUTTON 1
56-BT18PK-0HA POWER KNOB 1
56-407310-0HA DECORATE ANNULUS 1
57-FGP005-XX1 LED LENS 1
63-B30080-AB4 S/T SCREW B 3 X 8 AB 3 MTG KEY BD & F.CAB
18-CD0106-JNX RES. C.F. 10M OHM 1/4W +/-5% 2 FOR PUSH BUTTON&POWER KNOB CONNECT GND
41-BF0450-0BB WIRE UL1007#24 450 BLACK 2 FOR PUSH BUTTON&POWER KNOB CONNECT GND
54-343300-0X0 HEAT SHRINKABLE TUBE 3 X 0.25 0.06 FOR PUSH BUTTON&POWER KNOB CONNECT GND
67-105580-0E2 SOLDERING TAG 2 FOR PUSH BUTTON&POWER KNOB CONNECT GND
65-Z60100-50E NUT M 6 4 MTG CRT & FRONT.CAB
54-113970-0U0 PVC TUBE #5 L=ROLL 0.32
54-114000-00X FELT TAPE (150mmX19mmX0.3mm) 4 MTG CRT
59-377680-000 RUBBER PAD (22X22X5mm) 4 MTG 62-389500-1CN
62-389500-1CN CRT SUPPORT 2
08-29T18E-IRY ASS'Y - RECIVE BD 1
11-C124ES-0BX TRANSISTOR PDTC124ES (NPN) 1 Q082
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q081
18-CB0181-JNX RES. C.F. 180 OHM 1/6W +/-5% 1 R090
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R091
18-CB0470-JNX RES. C.F. 47 OHM 1/6W +/-5% 1 R089
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C080
46-39131H-05X HS 5P 2468#24 600 TJC3-5Y/JC25-5Y 1 P005 FOR M.BD P001
02-IRR001-XX1 IR RECEIVER MODULE HRM380017 1 IR001
40-29T18E-IRB1X P.C.B. RECEIVE BD 1
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 J082
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 J001
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 J085
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 J008
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 J083
46-CE040T-02J HS 2P 2468#24 400MM TJC3-2Y 1 P005B FOR SW BD S803
25-BCB331-M1X CAP. ELEC 330 UF 16V +/-20% 1 C081
08-29T18E-KEY ASS'Y - KEY BD 1
18-CB0152-JNX RES. C.F. 1.5k OHM 1/6W +/-5% 1 R086
18-CB0622-JNX RES. C.F. 6.2k OHM 1/6W +/-5% 1 R082

15
 Item No. Description Quantity Req. Designator Remarks
18-CB0182-JNX RES. C.F. 1.8K OHM 1/6W +/-5% 1 R085
18-CB0272-JNX RES. C.F. 2.7k OHM 1/6W +/-5% 1 R084
18-CB0432-JNX RES. C.F. 4.3K OHM 1/6W +/-5% 1 R083
48-TAC001-XX0 TACT SWITCH 1 S001
48-TAC001-XX0 TACT SWITCH 1 S002
48-TAC001-XX0 TACT SWITCH 1 S003
48-TAC001-XX0 TACT SWITCH 1 S004
48-TAC001-XX0 TACT SWITCH 1 S005
48-TAC001-XX0 TACT SWITCH 1 S006
46-CE060T-02J CONNECTION TJC3-2Y/JC25-2Y 600MM 1 P001 FOR M. BD P005A
41-WJ0070-B00 WIRE BARE JUMPER 7MM 1 J082
40-29T18E-KEB1X P.C.B. KEY BD 1
08-29T17E-RCN REAR CABINET 1
63-B40250-AB2 S/T SCREW B 4 X 25 AB 10 MTG REAR.CAB & FRONT.CAB
63-F30100-BT3 S/T SCREW F 3 X 10 BT (BLACK) 3 MTG RCA JACK & REAR.CAB
58-CA41RI-1UI INLAY REAR AV 1
58-CA61SI-1UI INLAY SIDE AV 1
55-BA41RC-0AN REAR CABINET 1
58-BT18MP-0UI PLATE MODEL NO. 1
54-114000-00X FELT TAPE (150mmX19mmX0.3mm) 9
62-389620-0UD POWER LINE BLOCK 1
08-29T18E-SW1 ASS'Y - SWITCH BD(AA) 1
40-21T18H-SWA1X P.C.B. SWITCH BD 1
46-35063W-03X PIN BASE *3 VH-3A 1 P804A
46-39073H-03X HS 2P 1617#22 200 TJC1-2Y/VH-3Y 1 FOR P804A TO POWER PARTS
48-POW001-AX0 SWITCH POWER 1 SW801
51-JC0243-0PN01 POWER CORD 1
46-35063W-03X PIN BASE *3 VH-3A 1 P804
46-33079W-02X PIN BASE *2 TJC3-2A 1 S803 FOR IR BD
46-33079W-04X PIN BASE *4 TJC3-4A 1 S804 FOR LAMP
08-BT174E-PAY ASS'Y - PACKING PARTS 1
74-022032-6WE POLYBAG (23cmX34cmX0.06mm) 1
74-130130-80HAA POLYBAG W/SUFFOCATION WARNING 1
75-BT18UL-CC0 POLYFOAM "UL" 1
75-BT18UR-CC0 POLYFOAM "UR" 1

16
 Item No. Description Quantity Req. Designator Remarks
75-BT18LL-CC0 POLYFOAM "LL" 1
75-BT18LR-CC0 POLYFOAM "LR" 1
76-A29T18-0AT CARTON BOX 1
49-382550-BAT BATTERY R06P AA 1.5V 5# 2
72-BT174E-E32 OPERATION MANUAL 1
08-HS46F0-M113C 1
13-00AS12-13B IC AS1213B 1 IC1501
14-IRE05B-XX0 IR EMITTING DIODE TSAL6200 1 D1501
18-CB0221-JNX RES. C.F. 220 OHM 1/6W +/-5% 1 R1502
18-CB0229-JNX RES. C.F. 2.2 OHM 1/6W +/-5% 1 R1501
25-HBB479-M1X CAP. ELEC 4.7 UF 10V +/-20% 1 C1502
26-EBP101-JCX CAP. CER 100PF 50V +/-5% CH 1 C1503
26-EBP101-JCX CAP. CER 100PF 50V +/-5% CH 1 C1504
40-113SLF-RMB P.C.B. REMOTE HANDSET BD 1
41-WJ0070-B00 WIRE BARE JUMPER 7MM 1 J1501
45-COS455-KY1 CERAMIC RESONATOR 455KHz 1 X1501
49-HS46F0-00X RUBBER PAD KEYS 1
55-HS46FB-0HA CASE LOWER - REMOTE HANDSET 1
55-HS46FD-0HA DOOR BATT. - REMOTE HANDSET 1
55-HS46FT-0HA CASE UPPER - REMOTE HANDSET 1
63-B26060-BT2 S/T SCREW B 2.6 X 6 BT 1
67-X26968-0E2 BATT. TERMINAL (+/-) 1
67-X31028-0E2 SPRING - BATTERY (-) 1
67-X31029-0E2 SPRING - BATTERY (+) 1
74-009022-60C POLYBAG HANDSET (9CMX22CM) 1
11-0BC337-0BX TRANSISTOR (NPN) BC337-40 1 Q1501
58-HS46F3-AUI INLAY REMOTE HANDSET 1
08-29T18E-SIY ASS'Y - SIDE AV BD 1
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J001
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J002
46-39136H-07X 7P 2468#24/1185#26 550 TJC3-7Y/SCN-7Y 1 P002 FOR M.BD P921
47-RCA041-XX0 JACK RCA 3PH H=8MM YL WH RD/SW 1 P1103
47-SVI002-XX0 Y/C SOCKET VERTICAL TYPE 1 P961
40-21T18H-SIB1X P.C.B. SIDE AV BD 1
08-BT174E-OT1 ASS'Y -OTHER PARTS OF MAIN BD 1

17
 Item No. Description Quantity Req. Designator Remarks
10-79C3V9-DBX DIODE ZENER 3V9 1/2W 5% 1 D605
11-DD1556-0AX TRANSISTOR 3DD1556 1 Q411
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 FOR Q205(C-E)
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q605
13-A20V04-TOP IC A20V04-TO 1 IC101
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R910
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R912
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R237
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R037
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R635
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R426
18-CB0183-JNX RES. C.F. 18k OHM 1/6W +/-5% 1 R432
18-CB0221-JNX RES. C.F. 220 OHM 1/6W +/-5% 1 R250
18-CB0222-JNX RES. C.F. 2.2k OHM 1/6W +/-5% 1 R909
18-CB0222-JNX RES. C.F. 2.2k OHM 1/6W +/-5% 1 R307
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R911
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R913
18-CB0394-JNX RES. C.F. 390K OHM 1/6W +/-5% 1 R425
18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R416
18-CB0563-JNX RES. C.F. 56K OHM 1/6W +/-5% 1 R414
18-CB0820-JNX RES. C.F. 82 OHM 1/6W +/-5% 1 R908
18-EG0109-JHX RES. FUS. 1 OHM 2W +/-5% 1 R301
18-EG0159-JHX RES. FUS. 1.5 OHM 2W +/-5% 1 R461
18-FF0221-JGX RES. M.O. 220 OHM 1W +/-5% 1 R311
18-FG0159-JHX RES. M.O. 1.5 OHM 2W +/-5% 1 R309
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C905
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C906
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C647
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C904
25-BMJ221-M1X CAP. ELEC 220 UF 400V +/-20% 1 C806
26-EBP100-JCX CAP. CER 10PF 50V +/-5% CH 1 C303
26-EBP222-KBX CAP. CER 2200PF 50V +/-10% B 1 C306
27-AGQ474-JSX CAP. M.PP 0.47UF 250V +/-5% 1 C419
27-ALQ103-J0X CAP. M.PP 0.01UF 1.6KV +/-5% 1 C412
27-MCC272-J0X CAP. M.P.E 2700PF 100V +/-5% 1 C311

18
 Item No. Description Quantity Req. Designator Remarks
27-RHQ223-J0X CAP. PP 0.022 UF 400V +/-5% 1 C413
34-R829J2-0EX COIL PL - 8.2 UH +/-5% 1 L204
36-WID601-XX1 COIL CHOKE 600 UH 1 L413
37-BSC290-1650X FLYBACK BSC29-0165 1 T461
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 JP901
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 JP902
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 JP904
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J303
41-WJ0110-B00 WIRE BARE JUMPER 11MM 1 J918
45-SAW296-6M00G SAW FILTER K2966M 1 Z101
45-TRA5M5-0Y0 CER TRAP TPS 5.5MHZ 1 X203
47-RCA023-XX1 RCA JACK 3PV YEL WHI RED/SW 1 P906
47-RCA023-XX1 RCA JACK 3PV YEL WHI RED/SW 1 P904
50-03150D-1GS1 FUSE 3.15AT 250VAC 5mmX20mm 1 F801
63-W30100-AB4 S/T SCREW W 3 X 10 AB 8 MTG M.BD & M.BD BKT
66-382330-0B7 RIVET 2.0X3.7X3.5 2 FOR C806
70-271510-00A SERVICE CARD 1 FOR PR0DUCTION USE
90-209770-SR1 SILICONE GREASE G-746 0.0015 FOR Q411,Q414,IC602,IC301,Q801
90-269080-ZU0 CLEAN COATING TC-131L 14KG/BARREL 0.0001
46-33079W-07X PIN BASE *7 TJC3-7A 1 P921
71-270870-0A9 LABEL 2
27-ALQ332-J0X CAP. M.PP 3300PF 1.6KV +/-5% 1 C411
27-ALQ332-J0X CAP. M.PP 3300PF 1.6KV +/-5% 1 C414
36-LIN240-XX1 COIL LINEARITY 24 UH 1 L414
57-10654X-00F cable ties (2.5mmX95mm) 6
62-B159MB-3UN MAIN BD BRACKET 1
07-389VI5-NA0 TUNER TCLL79107B5B3 1 TU101
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C222
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C241A
25-BCB101-M1X CAP. ELEC 100 UF 16V +/-20% 1 C915
18-CB0332-JNX RES. C.F. 3.3k OHM 1/6W +/-5% 1 J219
41-WJ0090-B00 WIRE BARE JUMPER 9MM 1 J906
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 JP903
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q212
18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R231

19
 Item No. Description Quantity Req. Designator Remarks
18-CB0331-JNX RES. C.F. 330 OHM 1/6W +/-5% 1 R232
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R233
18-CB0470-JNX RES. C.F. 47 OHM 1/6W +/-5% 1 R947
25-DFB478-M1X CAP. ELEC 0.47 UF 50V +/-20%NP 1 C211
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R614A
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C417
46-33079W-02X PIN BASE *2 TJC3-2A 1 P005A FOR KEY BD
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J413
40-2970ME-MAM1X P.C.B. MAIN BD 1
08-29184E-MAY ASS'Y- MAIN BD(NF) 1
10-0BY228-F0X DIODE BY228 1 D411
10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D412
10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D421
10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D431
10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D441
10-1N4001-EBX DIODE 1N4001 (RECTIFIER) 1 D301
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D201
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D202
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D203
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D204
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D205
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D601
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D602
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D603
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D606
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 R618("-" TO Q601)
10-79C5V1-DBX DIODE ZENER 5V1 1/2W 5% 1 D001
10-79C8V2-DBX DIODE ZENER 8V2 1/2W 5% 1 D303
11-2N3904-0BX TRANSISTOR 2N3904 (NPN) 1 Q004
11-630MFP-0AX TRANSISTOR IRF630MFP 1 Q414
11-C124ES-0BX TRANSISTOR PDTC124ES (NPN) 1 Q602
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q008
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q215
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q412
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q413

20
 Item No. Description Quantity Req. Designator Remarks
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q601
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q912
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q915
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q916
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q007
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q201
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q202
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q204
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q451
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q630
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q631
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q909
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q910
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q911
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q913
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q914
11-SC2482-0BX TRANSISTOR 2SC2482 1 Q401
11-SC3779-DBX TRANSISTOR 2SC3779D (RF AMPL) 1 Q101
11-SK2541-0BX FET 2SK2541(N-CHANNEL) 1 Q003
13-000040-52P IC 4052 1 IC901
13-000040-52P IC 4052 1 IC902
13-00M24C-08P IC EEPROM 8K M24C08 (WRITE) 1 IC001
13-0TDA81-72S IC TDA8172 1 IC301
13-NJW113-6LP IC NJW1136L 1 IC601
13-TDA894-4JS IC TDA8944J 1 IC602
18-CB0100-JNX RES. C.F. 10 OHM 1/6W +/-5% 1 R204
18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R203
18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R213
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R003
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R004
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R023
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R031
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R032
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R106
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R453

21
 Item No. Description Quantity Req. Designator Remarks
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R604
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R611
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R904
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R906
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R923
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R924
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R925
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R926
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R931
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R944
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R950
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R950A
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R951
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R951A
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 J205
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R006
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R025
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R026
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R033
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R035
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R043
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R054
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R224
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R227
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R246
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R305
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R607
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R034
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R235
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R236
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R619
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R907
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R943
18-CB0121-JNX RES. C.F. 120 OHM 1/6W +/-5% 1 R217
18-CB0123-JNX RES. C.F. 12k OHM 1/6W +/-5% 1 R413

22
 Item No. Description Quantity Req. Designator Remarks
18-CB0123-JNX RES. C.F. 12k OHM 1/6W +/-5% 1 R937
18-CB0151-JNX RES. C.F. 150 OHM 1/6W +/-5% 1 R102
18-CB0151-JNX RES. C.F. 150 OHM 1/6W +/-5% 1 R108
18-CB0151-JNX RES. C.F. 150 OHM 1/6W +/-5% 1 R218
18-CB0151-JNX RES. C.F. 150 OHM 1/6W +/-5% 1 R228
18-CB0151-JNX RES. C.F. 150 OHM 1/6W +/-5% 1 R928
18-CB0151-JNX RES. C.F. 150 OHM 1/6W +/-5% 1 R929
18-CB0153-JNX RES. C.F. 15k OHM 1/6W +/-5% 1 R009
18-CB0153-JNX RES. C.F. 15k OHM 1/6W +/-5% 1 R021
18-CB0183-JNX RES. C.F. 18k OHM 1/6W +/-5% 1 R933
18-CB0202-JNX RES. C.F. 2K OHM 1/6W +/-5% 1 R412
18-CB0220-JNX RES. C.F. 22 OHM 1/6W +/-5% 1 R027
18-CB0220-JNX RES. C.F. 22 OHM 1/6W +/-5% 1 R028
18-CB0221-JNX RES. C.F. 220 OHM 1/6W +/-5% 1 R401
18-CB0222-JNX RES. C.F. 2.2k OHM 1/6W +/-5% 1 R417
18-CB0222-JNX RES. C.F. 2.2k OHM 1/6W +/-5% 1 R423
18-CB0222-JNX RES. C.F. 2.2k OHM 1/6W +/-5% 1 R615
18-CB0222-JNX RES. C.F. 2.2k OHM 1/6W +/-5% 1 R903
18-CB0222-JNX RES. C.F. 2.2k OHM 1/6W +/-5% 1 R945
18-CB0222-JNX RES. C.F. 2.2k OHM 1/6W +/-5% 1 R946
18-CB0222-JNX RES. C.F. 2.2k OHM 1/6W +/-5% 1 R946A
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R005
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R022
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R208A
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R616
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R630
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R631
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R632
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R633
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R905
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R932
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R938
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R939
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R940
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R941

23
 Item No. Description Quantity Req. Designator Remarks
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R942
18-CB0224-JNX RES. C.F. 220k OHM 1/6W +/-5% 1 R240
18-CB0271-JNX RES. C.F. 270 OHM 1/6W +/-5% 1 R243
18-CB0271-JNX RES. C.F. 270 OHM 1/6W +/-5% 1 R244
18-CB0271-JNX RES. C.F. 270 OHM 1/6W +/-5% 1 R245
18-CB0272-JNX RES. C.F. 2.7k OHM 1/6W +/-5% 1 R001
18-CB0272-JNX RES. C.F. 2.7k OHM 1/6W +/-5% 1 R002
18-CB0303-JNX RES. C.F. 30K OHM 1/6W +/-5% 1 R241
18-CB0331-JNX RES. C.F. 330 OHM 1/6W +/-5% 1 R201
18-CB0331-JNX RES. C.F. 330 OHM 1/6W +/-5% 1 R214
18-CB0331-JNX RES. C.F. 330 OHM 1/6W +/-5% 1 R608
18-CB0331-JNX RES. C.F. 330 OHM 1/6W +/-5% 1 R609
18-CB0332-JNX RES. C.F. 3.3k OHM 1/6W +/-5% 1 R212
18-CB0332-JNX RES. C.F. 3.3k OHM 1/6W +/-5% 1 R253
18-CB0333-JNX RES. C.F. 33K OHM 1/6W +/-5% 1 R020
18-CB0333-JNX RES. C.F. 33K OHM 1/6W +/-5% 1 R210
18-CB0333-JNX RES. C.F. 33K OHM 1/6W +/-5% 1 R225
18-CB0333-JNX RES. C.F. 33K OHM 1/6W +/-5% 1 R306
18-CB0333-JNX RES. C.F. 33K OHM 1/6W +/-5% 1 R617
18-CB0362-JNX RES. C.F. 3.6K OHM 1/6W +/-5% 1 R302
18-CB0392-JNX RES. C.F. 3.9K OHM 1/6W +/-5% 1 R007
18-CB0392-JNX RES. C.F. 3.9K OHM 1/6W +/-5% 1 R008
18-CB0392-JNX RES. C.F. 3.9K OHM 1/6W +/-5% 1 R203A
18-CB0392-JNX RES. C.F. 3.9K OHM 1/6W +/-5% 1 R303
18-CB0394-JNX RES. C.F. 390K OHM 1/6W +/-5% 1 R935
18-CB0470-JNX RES. C.F. 47 OHM 1/6W +/-5% 1 R024
18-CB0470-JNX RES. C.F. 47 OHM 1/6W +/-5% 1 R927
18-CB0471-JNX RES. C.F. 470 OHM 1/6W +/-5% 1 R036
18-CB0471-JNX RES. C.F. 470 OHM 1/6W +/-5% 1 R042
18-CB0471-JNX RES. C.F. 470 OHM 1/6W +/-5% 1 R044
18-CB0471-JNX RES. C.F. 470 OHM 1/6W +/-5% 1 R103
18-CB0471-JNX RES. C.F. 470 OHM 1/6W +/-5% 1 R208
18-CB0471-JNX RES. C.F. 470 OHM 1/6W +/-5% 1 R211
18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R010
18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R315

24
 Item No. Description Quantity Req. Designator Remarks
18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R420
18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R602
18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R612
18-CB0473-JNX RES. C.F. 47K OHM 1/6W +/-5% 1 R101
18-CB0473-JNX RES. C.F. 47K OHM 1/6W +/-5% 1 R219
18-CB0473-JNX RES. C.F. 47K OHM 1/6W +/-5% 1 R226
18-CB0473-JNX RES. C.F. 47K OHM 1/6W +/-5% 1 R610
18-CB0513-JNX RES. C.F. 51k OHM 1/6W +/-5% 1 R220
18-CB0560-JNX RES. C.F. 56 OHM 1/6W +/-5% 1 R107
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R216
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R934
18-CB0683-JNX RES. C.F. 68K OHM 1/6W +/-5% 1 R418
18-CB0683-JNX RES. C.F. 68K OHM 1/6W +/-5% 1 R936
18-CB0750-JNX RES. C.F. 75 OHM 1/6W +/-5% 1 R922
18-CB0820-JNX RES. C.F. 82 OHM 1/6W +/-5% 1 R901
18-CB0820-JNX RES. C.F. 82 OHM 1/6W +/-5% 1 R902
18-CB0822-JNX RES. C.F. 8.2K OHM 1/6W +/-5% 1 R202
18-CB0822-JNX RES. C.F. 8.2K OHM 1/6W +/-5% 1 R256
18-CD0479-JNX RES. C.F. 4.7 OHM 1/4W +/-5% 1 R030
18-CD0829-JNX RES. C.F. 8.2 OHM 1/4W +/-5% 1 R613
18-CD0829-JNX RES. C.F. 8.2 OHM 1/4W +/-5% 1 R620
18-CE0109-JNX RES. C.F. 1 OHM 1/2W +/-5% 1 R304
18-CE0271-JNX RES. C.F. 270 OHM 1/2W +/-5% 1 R209
18-DB0123-FNX RES. M.F. 12K OHM 1/6W +/-1% 1 R308
18-EG0109-JHX RES. FUS. 1 OHM 2W +/-5% 1 R422
18-EG0109-JHX RES. FUS. 1 OHM 2W +/-5% 1 R431
18-FE0121-JNX RES. M.O. 120 OHM 1/2W +/-5% 1 R310
18-FE0472-JNX RES. M.O. 4.7K OHM 1/2W +/-5% 1 R316
18-FF0242-JGX RES. M.O. 2.4K OHM 1W +/-5% 1 R402
18-FF0681-JGX RES. M.O. 680 OHM 1W +/-5% 1 R419
18-FG0103-JHX RES. M.O. 10K OHM 2W +/-5% 1 R421
18-FG0399-JHX RES. M.O. 3.9 OHM 2W +/-5% 1 R415
18-GM0302-KUX RES. CEMENT 3K OHM 7W +/-10% 1 R404
18-RG0228-JHX RES. WIRE ROUND 0.22 OHM 2W +/-5% 1 R614
25-264610-M1X CAP. ELEC 4.7UF 50V +/-20% NP 1 C415

25
 Item No. Description Quantity Req. Designator Remarks
25-BCA102-M1X CAP. ELEC 1000 UF 16V +/-20% 1 C245
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C021
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C033
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C228
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C235
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C902
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C903
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C911
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C912
25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C917
25-BCB101-M1X CAP. ELEC 100 UF 16V +/-20% 1 C028
25-BCB101-M1X CAP. ELEC 100 UF 16V +/-20% 1 C051
25-BCB101-M1X CAP. ELEC 100 UF 16V +/-20% 1 C219
25-BCB101-M1X CAP. ELEC 100 UF 16V +/-20% 1 C233
25-BCB101-M1X CAP. ELEC 100 UF 16V +/-20% 1 C612
25-BCB101-M1X CAP. ELEC 100 UF 16V +/-20% 1 C914
25-BCB101-M1X CAP. ELEC 100 UF 16V +/-20% 1 C930
25-BCB101-M1X CAP. ELEC 100 UF 16V +/-20% 1 C930A
25-BCB221-M1X CAP. ELEC 220 UF 16V +/-20% 1 C910
25-BCB331-M1X CAP. ELEC 330 UF 16V +/-20% 1 C630
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C213
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C229
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C631
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C901
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C920
25-BDA102-M1X CAP. ELEC 1000 UF 25V +/-20% 1 C623
25-BDB470-M1X CAP. ELEC 47 UF 25V +/-20% 1 C632
25-BEA102-M1X CAP. ELEC 1000 UF 35V +/-20% 1 C432
25-BEA221-M1X CAP. ELEC 220 UF 35V +/-20% 1 C302
25-BEA471-M1X CAP. ELEC 470 UF 35V +/-20% 1 C301
25-BEG222-M1X CAP. ELEC 2200 UF 35V +/-20% 1 C308
25-BFB101-M1X CAP. ELEC 100 UF 50V +/-20% 1 C105
25-BFB101-M1X CAP. ELEC 100 UF 50V +/-20% 1 C224
25-BFB101-M1X CAP. ELEC 100 UF 50V +/-20% 1 C237
25-BFB109-M1X CAP. ELEC 1 UF 50V +/-20% 1 C218

26
 Item No. Description Quantity Req. Designator Remarks
25-BFB109-M1X CAP. ELEC 1 UF 50V +/-20% 1 C221
25-BFB109-M1X CAP. ELEC 1 UF 50V +/-20% 1 C307
25-BFB229-M1X CAP. ELEC 2.2 UF 50V +/-20% 1 C601
25-BFB229-M1X CAP. ELEC 2.2 UF 50V +/-20% 1 C607
25-BFB229-M1X CAP. ELEC 2.2 UF 50V +/-20% 1 C650
25-BFB229-M1X CAP. ELEC 2.2 UF 50V +/-20% 1 C657
25-BFB478-M1X CAP. ELEC 0.47 UF 50V +/-20% 1 C227
25-BFB478-M1X CAP. ELEC 0.47 UF 50V +/-20% 1 C918
25-BFB479-M1X CAP. ELEC 4.7 UF 50V +/-20% 1 C101
25-BFB479-M1X CAP. ELEC 4.7 UF 50V +/-20% 1 C223
25-BFB479-M1X CAP. ELEC 4.7 UF 50V +/-20% 1 C304
25-BFB479-M1X CAP. ELEC 4.7 UF 50V +/-20% 1 C614
25-BFB479-M1X CAP. ELEC 4.7 UF 50V +/-20% 1 C615
25-BFB479-M1X CAP. ELEC 4.7 UF 50V +/-20% 1 C616
25-BFB479-M1X CAP. ELEC 4.7 UF 50V +/-20% 1 C617
25-BFB479-M1X CAP. ELEC 4.7 UF 50V +/-20% 1 C618
25-BFB479-M1X CAP. ELEC 4.7 UF 50V +/-20% 1 C619
25-BFB479-M1X CAP. ELEC 4.7 UF 50V +/-20% 1 C620
25-BJG101-M1X CAP. ELEC 100 UF 160V +/-20% 1 C422
25-BKA100-M1X CAP. ELEC 10 UF 200V +/-20% 1 C421
25-BLF100-M1X CAP. ELEC 10 UF 250V +/-20% 1 C442
25-GFB228-K1X CAP. ELEC 0.22 UF 50V +/-10% 1 C216
25-GFB478-K1X CAP. ELEC 0.47 UF 50V +/-10% 1 C246
25-GFB478-K1X CAP. ELEC 0.47 UF 50V +/-10% 1 C248
26-ABC104-ZFX CAP. CER 0.1 UF 50V +80-20% F 1 C232
26-AIC221-KBX CAP. CER 220 PF 500V +/-10% B 1 C431
26-AIC221-KBX CAP. CER 220 PF 500V +/-10% B 1 C441
26-AIC332-KBX CAP. CER 3300 PF 500V +/-10% B 1 C402
26-AIC391-KBX CAP. CER 390 PF 500V +/-10% B 1 C403
26-AIM103-KBX CAP. CER 0.01UF 500V +/-10% B 1 C401
26-EBP101-JCX CAP. CER 100PF 50V +/-5% CH 1 C035
26-EBP101-JCX CAP. CER 100PF 50V +/-5% CH 1 C240
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C109
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C226
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C416

27
 Item No. Description Quantity Req. Designator Remarks
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C651
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C007
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C022
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C029
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C034
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C050
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C106
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C107
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C108
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C214
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C220
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C225
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C234
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C238
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C244
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C250
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C418
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C613
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C913
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C921
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C922
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C923
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C931A
26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C004
26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C230
26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C236
26-EBP152-KBX CAP. CER 1500pF 50V +/-10% B 1 C002
26-EBP181-JCX CAP. CER 180PF 50V +/-5% CH 1 C919
26-EBP220-JCX CAP. CER 22PF 50V +/-5% CH 1 C023
26-EBP220-JCX CAP. CER 22PF 50V +/-5% CH 1 C024
26-EBP220-JCX CAP. CER 22PF 50V +/-5% CH 1 C252
26-EBP221-JCX CAP. CER 220PF 50V +/-5% CH 1 C006
26-EBP221-JCX CAP. CER 220PF 50V +/-5% CH 1 C009
26-EBP221-JCX CAP. CER 220PF 50V +/-5% CH 1 C027
26-EBP221-JCX CAP. CER 220PF 50V +/-5% CH 1 C030

28
 Item No. Description Quantity Req. Designator Remarks
26-EBP222-KBX CAP. CER 2200PF 50V +/-10% B 1 C003
26-EBP222-KBX CAP. CER 2200PF 50V +/-10% B 1 C217
26-EBP222-KBX CAP. CER 2200PF 50V +/-10% B 1 C231
26-EBP270-JCX CAP. CER 27PF 50V +/-5% CH 1 C008
26-EBP330-JCX CAP. CER 33PF 50V +/-5% CH 1 C916
26-EBP331-JCX CAP. CER 330PF 50V +/-5% CH 1 C020
26-EBP331-JCX CAP. CER 330PF 50V +/-5% CH 1 C042
26-EBP331-JCX CAP. CER 330PF 50V +/-5% CH 1 C043
26-EBP390-JCX CAP. CER 39PF 50V +/-5% CH 1 C031
26-EBP390-JCX CAP. CER 39PF 50V +/-5% CH 1 C032
26-EBP471-JCX CAP. CER 470PF 50V +/-5% CH 1 C239
27-MBC103-J0X CAP. M.P.E 0.01UF 63V+/-5% 1 C626
27-MBC103-J0X CAP. M.P.E 0.01UF 63V+/-5% 1 C628
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C102
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C242
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C251
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C253
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C602
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C603
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C605
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C624
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C625
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C633
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C643
27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C652
27-MBC222-J0X CAP. M.P.E 0.0022UF 63V +/-5% 1 C604
27-MBC222-J0X CAP. M.P.E 0.0022UF 63V +/-5% 1 C653
27-MBC222-J0X CAP. M.P.E 0.0022UF 63V +/-5% 1 C654
27-MBC333-J0X CAP. M.P.E 0.033UF 63V +/-5% 1 C656
27-MBC334-J0X CAP. M.P.E 0.33UF 63V +/-5% 1 C608
27-MBC393-J0X CAP. M.P.E 0.039UF 63V +/-5% 1 C309
27-MBC472-J0X CAP. M.P.E. 0.0047UF 63V +/-5% 1 C645
27-MBC472-J0X CAP. M.P.E. 0.0047UF 63V +/-5% 1 C646
27-MBC473-J0X CAP. M.P.E 0.047 UF 63V +/-5% 1 C655
27-MBC474-J0X CAP. M.P.E 0.47UF 63V +/-5% 1 C627

29
 Item No. Description Quantity Req. Designator Remarks
27-MBC474-J0X CAP. M.P.E 0.47UF 63V +/-5% 1 C629
27-PBC822-J0X CAP. P.E 0.0082UF 63V +/-5% 1 C247
27-RHQ563-J0X CAP. PP 0.056 UF 400V +/-5% 1 C451
34-A109K0-1IX COIL CHOKE 1 UH +/-10% 1 L102
34-R100J2-0EX COIL PL - 10 UH +/-5% 1 J617
34-R100J2-0EX COIL PL - 10 UH +/-5% 1 L002
34-R100J2-0EX COIL PL - 10 UH +/-5% 1 L208
34-R220J2-0EX COIL PL - 22 UH +/-5% 1 J004
34-R220J2-0EX COIL PL - 22 UH +/-5% 1 L201
34-R220J2-0EX COIL PL - 22 UH +/-5% 1 L202
34-R220J2-0EX COIL PL - 22 UH +/-5% 1 L206
34-R270J2-0EX COIL PL - 27 UH +/-5% 1 L207
34-R470J2-0EX COIL PL - 47 UH +/-5% 1 L101
36-HDR001-AX1 TRANSFOR HOR. DRIVE (MAGNETIC CORE) 1 T401
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 C215
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 J631
41-WJ0055-B00 WIRE BARE JUMPER 5.5 MM 1 J915
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J005
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J102
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J1114
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J218
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J229
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J301
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J302
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J306
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J307
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J419
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J610
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J614
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J628
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J909
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J910
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J911
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J923
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R930

30
 Item No. Description Quantity Req. Designator Remarks
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 D209
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J008
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J023
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J201
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J202
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J217
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J226A
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J305
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J602
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J606
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J622
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 R105
41-WJ0070-B00 WIRE BARE JUMPER 7MM 1 J919
41-WJ0070-B00 WIRE BARE JUMPER 7MM 1 J922
41-WJ0070-B00 WIRE BARE JUMPER 7MM 1 J926
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 D413
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 D414
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J208
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J210
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J221
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J222
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J230
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J308
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J416
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J623
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J624
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J917
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J924
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J925
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 R314
41-WJ0080-B00 WIRE BARE JUMPER 8 MM 1 J006
41-WJ0080-B00 WIRE BARE JUMPER 8 MM 1 J603
41-WJ0080-B00 WIRE BARE JUMPER 8 MM 1 J604
41-WJ0085-B00 WIRE BARE JUMPER 8.5MM 1 J007
41-WJ0085-B00 WIRE BARE JUMPER 8.5MM 1 J025

31
 Item No. Description Quantity Req. Designator Remarks
41-WJ0085-B00 WIRE BARE JUMPER 8.5MM 1 J223
41-WJ0085-B00 WIRE BARE JUMPER 8.5MM 1 J414
41-WJ0085-B00 WIRE BARE JUMPER 8.5MM 1 J415
41-WJ0085-B00 WIRE BARE JUMPER 8.5MM 1 J605
41-WJ0085-B00 WIRE BARE JUMPER 8.5MM 1 J627
41-WJ0085-B00 WIRE BARE JUMPER 8.5MM 1 J629
41-WJ0085-B00 WIRE BARE JUMPER 8.5MM 1 J902
41-WJ0085-B00 WIRE BARE JUMPER 8.5MM 1 J907
41-WJ0090-B00 WIRE BARE JUMPER 9MM 1 J015A
41-WJ0090-B00 WIRE BARE JUMPER 9MM 1 J024
41-WJ0090-B00 WIRE BARE JUMPER 9MM 1 J1110
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J021
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J022
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J216
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J403
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J615
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J616
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J901
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J912
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J914
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J916
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J921
41-WJ0105-B00 WIRE BARE JUMPER 10.5MM 1 J214
41-WJ0105-B00 WIRE BARE JUMPER 10.5MM 1 J228
41-WJ0110-B00 WIRE BARE JUMPER 11MM 1 J001
41-WJ0110-B00 WIRE BARE JUMPER 11MM 1 J002
41-WJ0110-B00 WIRE BARE JUMPER 11MM 1 J003
41-WJ0110-B00 WIRE BARE JUMPER 11MM 1 J012
41-WJ0115-B00 WIRE BARE JUMPER 11.5MM 1 J1109
41-WJ0115-B00 WIRE BARE JUMPER 11.5MM 1 J607
41-WJ0115-B00 WIRE BARE JUMPER 11.5MM 1 J613
41-WJ0125-B00 WIRE BARE JUMPER 12.5MM 1 J020
41-WJ0125-B00 WIRE BARE JUMPER 12.5MM 1 J206
41-WJ0125-B00 WIRE BARE JUMPER 12.5MM 1 J209
41-WJ0125-B00 WIRE BARE JUMPER 12.5MM 1 J227

32
 Item No. Description Quantity Req. Designator Remarks
41-WJ0125-B00 WIRE BARE JUMPER 12.5MM 1 J608
41-WJ0125-B00 WIRE BARE JUMPER 12.5MM 1 J929
41-WJ0125-B00 WIRE BARE JUMPER 12.5MM 1 J930
41-WJ0130-B00 WIRE BARE JUMPER 13MM 1 J215
41-WJ0130-B00 WIRE BARE JUMPER 13MM 1 J220
41-WJ0140-B00 WIRE BARE JUMPER 14MM 1 J207
41-WJ0140-B00 WIRE BARE JUMPER 14MM 1 J224
41-WJ0145-B00 WIRE BARE JUMPER 14.5MM 1 J625
41-WJ0145-B00 WIRE BARE JUMPER 14.5MM 1 J904
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 J019
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 J101
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 J104
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 J411
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 J420
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 J421
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 J920
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 L411
41-WJ0150-B00 WIRE BARE JUMPER 15MM 1 L412
41-WJ0160-B00 WIRE BARE JUMPER 16MM 1 J405
41-WJ0165-B00 WIRE BARE JUMPER 16.5MM 1 J225
41-WJ0165-B00 WIRE BARE JUMPER 16.5MM 1 J611
41-WJ0165-B00 WIRE BARE JUMPER 16.5MM 1 J612
41-WJ0175-B00 WIRE BARE JUMPER 17.5MM 1 J010
41-WJ0175-B00 WIRE BARE JUMPER 17.5MM 1 J011
41-WJ0175-B00 WIRE BARE JUMPER 17.5MM 1 J105
41-WJ0175-B00 WIRE BARE JUMPER 17.5MM 1 J212
41-WJ0185-B00 WIRE BARE JUMPER 18.5MM 1 J016
41-WJ0185-B00 WIRE BARE JUMPER 18.5MM 1 J017
41-WJ0185-B00 WIRE BARE JUMPER 18.5MM 1 J226
41-WJ0185-B00 WIRE BARE JUMPER 18.5MM 1 J621
41-WJ0185-B00 WIRE BARE JUMPER 18.5MM 1 J621A
41-WJ0185-B00 WIRE BARE JUMPER 18.5MM 1 J626
41-WJ0190-B00 WIRE BARE JUMPER 19MM 1 J014
41-WJ0190-B00 WIRE BARE JUMPER 19MM 1 J015
41-WJ0190-B00 WIRE BARE JUMPER 19MM 1 J018

33
 Item No. Description Quantity Req. Designator Remarks
41-WJ0190-B00 WIRE BARE JUMPER 19MM 1 J908
41-WJ0195-B00 WIRE BARE JUMPER 19.5MM 1 J601
41-WJ0200-B00 WIRE BARE JUMPER 20MM 1 J013
41-WJ0200-B00 WIRE BARE JUMPER 20MM 1 J618
41-WJ0200-B00 WIRE BARE JUMPER 20MM 1 J619
41-WJ0200-B00 WIRE BARE JUMPER 20MM 1 J620
41-WJ0200-B00 WIRE BARE JUMPER 20MM 1 J905
41-WJ0200-B00 WIRE BARE JUMPER 20MM 1 J913
45-OSC8M0-0Y0 CRYSTAL 8.0MHZ 1 X001
46-12866W-02X PIN BASE *2 S11-02Y 1 P601
46-20598W-04X PIN BASE *4 TJC1-4A 1 P411 FOR D.Y CONNECTOR
46-33079W-02X PIN BASE *2 TJC3-2A 1 P602
46-33079W-03X PIN BASE *3 TJC3-3A 1 P002 FOR W. BAL. ADJUST
46-33079W-04X PIN BASE *4 TJC3-4A 1 P421 FOR CRT BD P502
46-33079W-05X PIN BASE *5 TJC3-5A 1 P001 FOR F. CTL BD
46-33079W-05X PIN BASE *5 TJC3-5A 1 P201 FOR CRT BD P503
54-128700-0X0 FIBRE WASHER 3.3 X 10 X 0.8 2 MTG FBT TO M.BD
62-227680-0UA BRACKET ABS-KINGFA 606 (UO) 1
63-B30100-BT4 S/T SCREW B 3 X 10 BT 2 MTG M.BD & FBT
64-P30080-104 M/C SCREW P 3 X 8 1 FOR IC301
64-P30080-104 M/C SCREW P 3 X 8 1 FOR Q411
64-P30080-104 M/C SCREW P 3 X 8 1 FOR Q414
64-P30100-104 M/C SCREW P 3 X 10 2 FOR IC602
65-Z30050-23M NUT M 3 2 FOR IC301 & Q411
66-343730-0B0 HOLLOW RIVET 1.6X3.0XL3.2 14 FOR C412,C414,C411,C413,C419,L414,L413
66-343730-0B0 HOLLOW RIVET 1.6X3.0XL3.2 3 FOR Q411
66-343730-0B0 HOLLOW RIVET 1.6X3.0XL3.2 8 FOR T461
66-382330-0B7 RIVET 2.0X3.7X3.5 2 FOR D411
66-382330-0B7 RIVET 2.0X3.7X3.5 2 FOR R404
67-H27292-1A0 HEAT SINK 1 FOR Q414
67-H30147-0A0 HEAT SINK FOR HORIZ (2501/2909 1 FOR Q411
67-H30179-7A0 HEAT SINK 1 FOR IC301
67-H34423-4A0 HEAT SINK 1 FOR IC602
41-BF0090-0BB WIRE UL1007 #24 90 MM BLACK 1 "G2" TO "G2"
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C925

34
 Item No. Description Quantity Req. Designator Remarks
26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C610
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C622
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C611
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C241
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C243
25-BCB101-M1X CAP. ELEC 100 UF 16V +/-20% 1 C210
10-CW574C-DJX DIODE CW574CD 1 D002
27-MBC224-J0X CAP. M.P.E 0.22UF 63V +/-5% 1 C005
27-MBC224-J0X CAP. M.P.E 0.22UF 63V +/-5% 1 C305
08-02918E-YUY ASS'Y-YUY BD 1
18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R206
18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R207
18-CB0820-JNX RES. C.F. 82 OHM 1/6W +/-5% 1 R206A
18-CB0820-JNX RES. C.F. 82 OHM 1/6W +/-5% 1 R207A
41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J919A
47-RCA089-XX0 RCA SOCKET AV-3.2-3LK-N2 1 P903
41-TF0150-9CC WIRE 2PIN 1 P903 Cb TO R206(R206A);P903 Cr TO R207(R207A)

35
 TCLM113 chassis alignment instruction

Enter factory mode in production line

Simply press the D-mode key on the factory remote handset.

Enter service mode

Press and hold the VOLUME DOWN key tightly on the unit until minimum level and don’t release the
VOLUMN DOWN key, then press the DISPLAY key on the remote handset.

“D” letter on the screen indicated that the factory mode was entered. Now you can use the shortcut key
to access the factory menu. All change in factory data will save in EEPROM automatically

Note:
1. You can disable the D-Mode key (on factory remote handset) by change “BIT-0” of “OPT” to “0”.
If the D-Mode key was disabled, you can’t enter D-Mode by the D-mode key on the factory remote
(but you can still enter service mode). It is suggested to disable the D-Mode key before the set
leave the factory.
2. On the factory remote handset, you can find the “I²C” key. It can cut off the I2C control from the
CPU to other IC. This is only useful when automatic adjustment of white balance.
3. All system data in menu of “key 6” must keep unchanged when servicing. Otherwise, the set may
not work properly.

Setting method:
No Adjustment Data Name (default Conditions and Setting method (need enter D-mode)
Items value inside blanket) input signal
1 Screen ------------ “IRGB cut off”
Press “MUTE” key on the remote handset
voltage must set to 80 (all and the screen will become a horizontal
pattern) line. Then adjust the “screen” VR on the
flyback until the horizontal line can just
be seen (minimum visible intensity).
2 Focus voltage ------------ Cross hatch
Adjust the “focus” VR on the flyback
pattern. until the screen becomes clear.
3 Vertical HIT(11) Input a PAL cross
Adjust HIT for vertical amplitude.
geometry for VP50(02) hatch pattern.
Adjust VP50 for vertical position.
PAL system VLIN(00)
Adjust VLIN for vertical linearity.
(Key 1) VSC(01)
Adjust VSC for vertical S-correction
VBLK(00)
(Normally use default value)
VCEN(11)
(Normally use default value).
OSDH(1F)
Adjust OSDH for OSD position

2
5 Vertical HITS(14) Input a NTSC
Adjust HITS for vertical amplitude.
geometry for VP60(00) cross hatch
Adjust VP60 for vertical position.
NTSC system VLIS(02) pattern.
Adjust VLINS for vertical linearity.
(Key 1) VSS(02)
Adjust VSS for vertical S-correction
VBLK(00)
(normally use default value)
VCEN(11)
(normally use default value)
OSDHS(1D)
Adjust OSDHS for OSD position

6 Horizontal HPOS (11) Input a PAL cross
Adjust HPOS for horizontal position.
geometry for DPC(26) hatch pattern with
Adjust DPC, KEY, ECCT and ECCB until
PAL system KEY(15) black and white the vertical line at left and right side of the
(Key 2) WID(2A) background. picture become straight.
ECCT(0D)
Adjust WID for horizontal width.
ECCB(0C)
VEHT and HENT is for the picture size
VEHT(04) stability when changing the brightness of
HEHT(04) the screen. Receive pattern of cross hatch
with black background and then change to
white background, then compare the
vertical and horizontal size between black
and white background. Adjust VEHT and
HEHT until you get the minimum
difference of screen size. After you adjust
VEHT and HEHT, you must re-adjust
vertical and horizontal amplitude.
7 Horizontal HPS (15) Input a NTSC
Adjust HPS for horizontal position.
geometry for DPCS(21) cross hatch
Adjust DPCS, KEYS, ECCTS and
NTSC system KEYS(10) pattern with black ECCBS until the vertical line at left and
(Key 2) WIDS(29) and white right side of the picture become straight.
ECCTS(12) background.
Adjust WIDS for horizontal width.
ECCBS(11)
Adjust VEHTS and HEHTS using same
VEHTS(04) method of PAL system. Also need
HEHTS(04) re-adjustment of vertical and horizontal
amplitude.
8 Key 3 CNTX (5A) ----------
(all use default value)
(Status CNTN (05)
adjustment) BRTX (20)
BRTN (1D)
COLX (3F)
COLN (00)
TNTX (42)
TNTN (28)
9 Key 4 BRTC (37) ----------
(all use default value)
(Status COLC (57)
adjustment) COLS (47)
COLP (F0)
SCOL(04)
SCNT (0F)
CNTC (40)
TNTC (48)

3
10 Key 5 ST3 (20) ----------
(all use default value)
(sharpness SV3 (20)
adjustment) ST4 (20)
SV4 (20)
SVD(15)
ASSH(04)
SHPX (3F)
SHPN (1A)
11 Key 7 RFAGC (26) Receive a 60dB
Adjust RFAGC until the picture noises
(Status SBY (0A) grey scale + disappear exactly.
adjustment) SRY (08) color bar signal
Adjust SBY and SRY to get the optimal
BRTS (0D) color for SECAM system.
TXCX (1F)
For the adjustment of BRTS, receive an 8
RGCN (00) step grey scale pattern and adjust all
MUTT(70) picture settings to 50%. Then adjust
STAT(30) BRTC until the first and second step on
the screen can just be distinguished.

(the other use default value)
12 Key 8 V01(3A) ----------
(all use default value)
(curve of V25(B0)
volume V50(DC)
control, V100(FF)
curve of BASC(40)
B.E./WOO- BASX(72)
FER) TREC(40)
WOFC(39)
AVC(0E)
NEWS(14)
SPACES(5A)
NEWT(14)
SPACET(5A)
WOFF(00)
B01(4F)
B25(68)
B50(7F)
13 Key calendar SVM(05) ----------
(all use default value)
(other SVM1(05)
adjustment) SVM2(05)
SVM3(05)
PYNX(28)
PYNN(15)
PYXS(22)
PYNS(04)
14 Key note CLTO(4B) ----------
(all use default value)
(other CLTM(4C)
adjustment) CLVO(4D)
CLVD(48)
ABL(27)
DCBS(33)
DEF(01)

4
15 Key game OSD1(30) ----------
(all use default value)
(other OSDF1(66)
adjustment) OSD2(48)
OSDF2(75)
HAFC(09)
NOIS(01)
UCOM(00)
16 Key 0 R CUT (80) Black and white 1. Measure the dark side of the picture with
(White G CUT (80) pattern (PAL) a color analyzer and set RCUT to 80.
balance B CUT (80) Then adjust BCUT and GCUT until the
adjustment) G DRV (40) data on the analyzer become x = 284, y =
B DRV (40) 299.
2. Measure the bright side of the picture,
Then adjust BDRV and GDRV until the
data on the analyzer become x = 284, y =
299.
3. Repeat step 1 and 2 until you get right
color on both dark and bright side of the
screen.

System data:
Item Adjust item Default value
Key6 OPT
FLG0
FLG1
STBY
HD-DELAY
MODE0
MODE1
MODE2

FACTORY-OUT SETUP：In D-MODE, press RECALL button to initialize to the FACTORY-OUT

status.
AGING MODE: In D-MODE, press OK button to entry AGING MODE.
EEPROM INITIALZATION: In D-MODE, press “0752” to initialize EEPROM.

NOTICE: Before to be released, any M113 chassis must be initialized to the FACTORY-OUT status.
Don’t try to initialize EEPROM, unless software can’t work normally.