Null
Null
Wheel Loader
Technical Data
2
57°
45°
E
F
D
C
B
A I H
49º
J
K
G
L
* The figures shown here are valid with Michelin XHA 23.5R25 tyres and include all lubricants, a full fuel tank, the
ROPS/FOPS cab and the operator.
Different tyres and optional equipment will change the operating weight and tipping load.
T = Welded-on tooth holder with add-on teeth
Dimensions
3
Light material bucket
* The figures shown here are valid with Michelin XHA 23.5R25 tyres and include all lubricants, a full fuel tank, the
ROPS/FOPS cab and the operator.
Different tyres and optional equipment will change the operating weight and tipping load.
Attachments
4
High-dump Bucket
A F
* The figures shown here are valid with Michelin XHA 23.5R25 tyres and include all lubricants, a full fuel tank, the
ROPS/FOPS cab and the operator.
Different tyres and optional equipment will change the operating weight and tipping load.
Attachments
5
Fork carrier and fork
F min.
600
F max.
E
C
G F
L
Fork carrier with quick change device Fork carrier and fork FEM IV
A Lifting height at max. reach mm 1780 1780
C Max. lifting height mm 3675 3675
E Max. operating height mm 4685 4685
F Reach at loading position mm 1020 1020
F max. Max. reach mm 1655 1655
F min. Reach at max. lifting height mm 835 835
G Fork length mm 1200 1500
L Length – basic machine mm 6885 6885
Tipping load, straight * kg 8280 8280
Tipping load, articulated at 40h ** kg 7290 7250
Operating weight * kg 14930 14980
* The figures shown here are valid with Michelin XHA 23.5R25 tyres and include all lubricants, a full fuel tank, the
ROPS/FOPS cab and the operator.
Different tyres and optional equipment will change the operating weight and tipping load.
** recommended payload (ISO 8313): for uneven ground = 60 % of tipping load (articulated at 40h)
for smooth surfaces = 80 % of tipping load (articulated at 40h)
Attachments
6
Selection of buckets
Loading buckets
3,0 m3
3,3 m3
5,0 m3
t/m3 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2
Gravel, moist ____________________________ 1,9 Clay and gravel, Sandstone ______________________________________ 1,6
dry ________________________________ 1,6 dry ________________________________ 1,4
wet, 6 – 50 mm ______ 2,0 wet ________________________________ 1,6 Slate ________________________________________________ 1,75
dry, 6 – 50 mm ______ 1,7
crushed stone ______________ 1,5 Earth, dry ________________________________ 1,3 Bauxite ____________________________________________ 1,4
wet excavated ______________ 1,6
Sand, dry ________________________________ 1,5 Gypsum, broken ____________________________ 1,8
moist ____________________________ 1,8 Topsoil ____________________________________________ 1,1
wet ________________________________ 1,9 Coke ________________________________________________ 0,5
Weathered rock
Gravel and sand, 50 % rock, 50 % earth ______________________ 1,7 Slag, broken ____________________________________ 1,8
dry ________________________________ 1,7
wet ________________________________ 2,0 Basalt ______________________________________________ 1,95 Coal ________________________________________________ 1,1
7
Basic Machine
Standard Optional Standard Optional
Liebherr travel gear x Safety belt X
Ride control x Flashing turn indicators x
Liebherr shock absorbing element X High-beam headlights x
Automatic travel mode x Diagnosis system x
20 km/h speed limiting x
Electronical theft protection x
Creep speed x
Electronic crowding force control x
Warning lights for:
Combined inching-braking system x Engine oil pressure x
Multi-disc limited slip differentials in both axles x Engine overheat x
Air cleaner system with pre-filter x Parking brake x
Particle protection for radiator x Hydraulic oil temperature x
Emergency steering system x Air cleaner blockage x
Headlights x Battery charge x
Tail lights x Flow through emergency steering system x
Working area lights at front x Road travel X
Working area lights at rear x
Battery master switch x
Pre-heat system for cold starting x
Towing hitch x
Audible warnings for:
Lockable doors, service flap an engine hood x Engine oil pressure x
Toolbox with toolkit x Engine overheat x
Dust filter system x Overheat of hydraulic fluid x
Protective ventilation system x Emergency steering system X
Amber beacon x
Warning device for travel in reverse X
Exhaust pipe – special steel x
Noise suppression package “101” X
Function keys for:
Automatic central lubrication system x Air conditioning x
Hazard warning flashers x
Parking brake x
Electronic tractive force adaptation x
Operator’s cab Creep speed x
Ride control x
Noise-damped ROPS/FOPS cab
Automatic bucket positioner x
with tinted safety glass x
Hoist Kick-out x
Hot-water heater with defroster
Additional hydraulics x
and recirculated-air system x
Float position x
Adjustable steering column x
Headlights x
Liebherr-joystick control x
Working lights front x
Air conditioning system x
Working lights rear x
Liebherr operator’s seat – adjustable in 6 ways x
Road travel x
Air sprung operator’s seat with seat belt x
Wash/wipe system for rear window x
Sliding window x
Amber beacon x
Emergency exit x
Mode switch x
Floor mat x
Wash/wipe system for windscreen and rear window x
Interior rear-view mirror x
Sun visor x Rotary switches for:
Bottle holder x
Blower x
Clothes hook x
Heater x
Storage box x
Fresh air or recirculated air x
Storage compartment x
Adjusting the crowding force counter x
Plug x
Ashtray x
Horn x
Provision for radio including Loudspeaker x Equipment
Radio set x
Z-bar linkage x
Operator’s package x
Parallel linkage X
Hydraulic servo control of working hydraulics x
Automatic bucket positioner – adjustable x
Automatic hoist kick out – adjustable x
Float position x
Instruments and displays for: Loading buckets with and without teeth,
Diesel engine pre-heat x or bolt-on cutting edge x
Engine oil temperature x High-dump bucket x
Fuel reserve x Light material bucket x
Timer for hours of operation x Fork carrier and lift forks x
Speedometer x Hydraulic quick-change device x
Travel speed ranges and gear selected x 3rd hydraulic control circuit x
Forward – reverse Travel x 3rd and 4th hydraulic control circuits x
Forward travel x Comfort control x
Reverse travel x
Speedometer x Country-specific versions x
Rev. counter x 44/54
Clock x X = Not available
8
Liebherr wheel loaders – principal data.
Stereoloader Stereoloader Stereoloader Stereoloader
Tipping load: L 506 3215 L 507 3465 L 508 3895 L 509 4440 kg
Bucket capacity: 0.8 0.9 1.0 1.1 m3
Operating weight: 4810 4930 5310 5510 kg
Engine output: 44/60 46/63 49/67 52/71 kW/hp
Stereoloader Stereoloader
Tipping load: L 512 4615 L 514 5305 kg
Bucket capacity: 1.3 1.5 m3
Operating weight: 7000 7700 kg
Engine output: 59/80 72/98 kW/hp
15/11/00
35 B
4 Liebherr test method.
30 Determine the number of working cycles that can be carried
T ~ 35 sec.
9
LBH/PM 8450577-2-06.01 Printed in Germany by Gerstmayer. Illustrations and data may differ from standard equipment. Subject to change without notice.
LIEBHERR-WERK BISCHOFSHOFEN GMBH, Postfach 49, A-5500 Bischofshofen, ç (0 64 62) 8 88-0, Fax (0 64 62) 8 88-3 85
www.liebherr.com, E-Mail: info@lbh.liebherr.com
With compliments: