Speed Limiting Electronical Theft Protection Creep Speed Electronic
Speed Limiting Electronical Theft Protection Creep Speed Electronic
Speed Limiting Electronical Theft Protection Creep Speed Electronic
Attachment hydraulics
Design ________________________________ “Load-sensing” variable axial piston
pump with output control and pres-
sure cutoff
Travel gear Max. flow ____________________________
Max. operating pressure ________
290 l/min.
350 bar
Hydrostatic travel Cooling ________________________________ Hydraulic oil cooling using thermo-
transmission ________________________ All-wheel drive statically controlled fan and oil
Design __________________________ Variable-displacement swashplate cooler
pump and axial piston motor in a Filtering ______________________________ Return-line filter in the hydraulic
closed-loop circuit with a 3-stage reservoir
planetary transmission. Direction of Control ________________________________ “Liebherr-Joystick” with hydraulic
travel is reversed by changing the servo control
flow-direction of the variable dis- Lift circuit ____________________________ Lifting, neutral, lowering
placement pump and float positions controlled by
Filtering system ______________ Suction-side filter for the closed Liebherr joystick with detent; auto-
circuit matic lifting-limit circuit
Control __________________________ By travel and inching pedal The Tilt circuit ____________________________ Tilt back, neutral, dump
inching pedal makes it possible to automatic bucket positioning
control the tractive and thrust forces
steplessly at full engine speed. The
Liebherr joystick is used to control Attachments
forward and reverse travel and select Geometry ____________________________ Powerful Z-pattern linkage with tilt
the travel stages cylinder and cast steel crosstube
Travel speeds ______________________ Stage 1 __________________________ – 8,0 km/h Bearings ______________________________ sealed
Stage 2 __________________________ – 18,0 km/h Cycle time at nominal load ____ Lifting __________________________________ 5,6 sec
Stage 2A (automatic) ______ – 18,0 km/h Dumping ________________________________ 2,0 sec
Stage 3A (automatic) ______ – 38,0 km/h Lowering (empty) __________________ 3,5 sec
Forwards and in reverse with tyre
size 26.5R25
Operator’s cab
Design ________________________________ ROPS/FOPS cab resiliently mounted
on rear section of vehicle and noise-
damped; lockable door with sliding
window and 180h opening angle;
Axles emergency exit; toughened safety
glass windows, tinted; adjustable
All-wheel drive steering column as standard equip-
Front axle __________________________ Fixed ment;
Rear axle ____________________________ Centre pivot, with 13h oscillating ROPS roll-over protection according
angle to each side. Obstacles up to to DIN/ISO 3471/EN 474-3 and
560 mm in height can be driven over FOPS falling objects protection
(with all four wheels remaining in according to DIN/ISO 3449/EN 474-1
contact with the ground) Operator’s seat ____________________ Air-suspensioned seat with lap belt
Differentials ________________________ Automatic limited-slip differentials Cab heating and ventilation __ With defrosting, fresh-air filter, air-
with 45 % locking action in both axles recirculated-air mode and heater
Final drive __________________________ Planetary final drive in the wheel supplied from engine’s cooling
hubs system. Air conditioning is standard
Track width ________________________ 2230 mm with all types of tyres equipment
Noise emission
(86/662/EWG) ______________________ In the operator’s cab
Without blower 69 dB(A)
Max. blower output 73 dB(A)
Brakes Outside cab 106 dB(A)
Wear-free service brake Self-locking of the hydrostatic travel
________
drive (acting on all four wheels) and
additional pumpaccumulator brake
Capacities
system with wet multi-disc brakes Fuel tank ______________________________________________________________________________ 330 l
located in the wheel hubs. Two sepa- Engine oil (including filter change) __________________________________________ 18 l
rate brake circuits Pump distributor gears ____________________________________________________________ 2,5 l
Parking brake ______________________ Electro-hydraulically actuated spring- Transmission __________________________________________________________________________ 21 l
loaded brake system on the trans- Front axle/wheel hubs ________________________________________________________ 36/20 l
mission Rear axle/wheel hubs __________________________________________________________ 24/11 l
Braking system complies with German road-vehicle construction Hydraulic tank ______________________________________________________________________ 160 l
and use regulations. Hydraulic system, total __________________________________________________________ 240 l
Technical Data
2
65°
45°
E
F
D
C
B
A I H
49º
J
K
G
L
Dimensions
3
Rock bucket
4,0 m3
Loading bucket
5,0 m3
5,5 m3
6,0 m3
Gravel, moist ____________________________ 1,9 Clay and gravel, Sandstone ________________________________________ 1,6
dry ________________________________ 1,6 dry ________________________________ 1,4
wet, 6 – 50 mm ______________ 2,0 wet ________________________________ 1,6 Slate ________________________________________________ 1,75
dry, 6 – 50 mm ______________ 1,7
crushed stone ______________ 1,5 Earth, dry ________________________________ 1,3 Bauxite ____________________________________________ 1,4
wet excavated ______________ 1,6
Sand, dry ________________________________ 1,5 Gypsum, broken ______________________________ 1,8
moist ____________________________ 1,8 Topsoil ____________________________________________ 1,1
wet ________________________________ 1,9 Coke ________________________________________________ 0,5
Weathered rock
Gravel and sand, 50 % rock, 50 % earth ______________________ 1,7 Slag, broken ____________________________________ 1,8
dry ________________________________ 1,7
wet ________________________________ 2,0 Basalt ______________________________________________ 1,95 Coal __________________________________________________ 1,1
4
Basic Machine
Standard Optional Standard Optional
Liebherr travel gear x Flashing turn indicators x
Ride control x High-beam headlights x
Liebherr shock absorbing element X Diagnosis system x
Automatic travel mode x
20 km/h speed limiting x
Electronical theft protection
Creep speed
x
x
Warning lights for:
Electronic crowding force control x Engine oil pressure x
Combined inching-braking system x Engine overheat x
Multi-disc limited slip differentials in both axles x Parking brake x
Air cleaner system with pre-filter x Hydraulic oil temperature x
Particle protection for radiator x Air cleaner blockage x
Emergency steering system x Battery charge x
Headlights x Flow through emergency steering system x
Tail lights x Road travel X
Working area lights at front x
Working area lights at rear x
Battery master switch
Pre-heat system for cold starting
x
x
Audible warnings for:
Towing hitch x Engine oil pressure x
Lockable doors, service flap an engine hood x Engine overheat x
Toolbox with toolkit x Overheat of hydraulic fluid x
Dust filter system x Emergency steering system X
Protective ventilation system x
Amber beacon x
Warning device for travel in reverse
Exhaust pipe – special steel x
x
Function keys for:
Noise suppression package “101” x Air conditioning x
Hazard warning flashers x
Parking brake x
Electronic tractive force adaptation x
Creep speed x
Ride control
Operator’s cab Automatic bucket positioner
x
x
Noise-damped ROPS/FOPS cab x Hoist Kick-out x
with tinted safety glass Additional hydraulics x
Hot-water heater with defroster x Float position x
and recirculated-air system Headlights x
Adjustable steering column x Working lights front x
Liebherr-joystick control x Working lights rear x
Air conditioning system x Road travel x
Liebherr operator’s seat – adjustable in 6 ways x Wash/wipe system for rear window x
Air sprung operator’s seat with seat belt x Amber beacon x
Sliding window x Mode switch x
Emergency exit x
Floor mat x
Wash/wipe system for windscreen and rear window
Interior rear-view mirror
x
x
Rotary switches for:
Sun visor x Blower x
Bottle holder x Heater x
Clothes hook x Fresh air or recirculated air x
Storage box x Adjusting the crowding force counter x
Storage compartment x
Plug x
Ashtray
Horn
x
x
Equipment
Provision for radio including Loudspeaker x Z-bar linkage x
Radio set x Parallel linkage X
Operator’s package x Hydraulic servo control of working hydraulics x
Automatic bucket positioner – adjustable x
Automatic hoist kick out – adjustable x
Float position x
Loading buckets with and without teeth, x
or bolt-on cutting edge
Instruments and displays for: High-dump bucket x
Diesel engine pre-heat x Light material bucket x
Engine oil temperature x Fork carrier and lift forks x
Fuel reserve x Hydraulic quick-change device x
Timer for hours of operation x 3rd hydraulic control circuit x
Speedometer x 3rd and 4th hydraulic control circuits x
Travel speed ranges and gear selected x Comfort control x
Forward travel x 20 km/h speed limiting x
Reverse travel x Automatic acting central lubrication system
Speedometer x
Rev. counter x Country-specific versions x
Clock x
Safety belt X X = Not available
5
Liebherr wheel loaders – principal data.
Stereoloader Stereoloader Stereoloader Stereoloader
Tipping load: L 506 3215 L 507 3465 L 508 3895 L 509 4440 kg
Bucket capacity: 0.8 0.9 1.0 1.1 m3
Operating weight: 4810 4930 5310 5510 kg
Engine output: 44/60 46/63 49/67 52/71 kW/hp
Stereoloader Stereoloader
Tipping load: L 512 4615 L 514 5305 kg
Bucket capacity: 1.3 1.5 m3
Operating weight: 7000 7700 kg
Engine output: 59/80 72/98 kW/hp
15/11/00
LBH/PM 8450782-0.75-12.00 Printed in Germany by Gerstmayer. Illustrations and data may differ from standard equipment. Subject to change without notice.
How economical is your
wheel loader?
5 Measuring your wheeled loader’s fuel
n=? consumption is as easy as this!
2,5m
35 B
4 Liebherr test method.
30 Determine the number of working cycles that can be carried
T ~ 35 sec.
LIEBHERR-WERK BISCHOFSHOFEN GMBH, Postfach 49, A-5500 Bischofshofen, ç (0 64 62) 8 88-0, Fax (0 64 62) 8 88-3 85
www.liebherr.com, E-Mail: info@lbh.liebherr.com
With compliments: