Liebherr R 924 Excavator Radiator
Liebherr R 924 Excavator Radiator
Liebherr R 924 Excavator Radiator
Hydraulic Controls
Power distribution ________________ via control valve with integrated safety valves,
simultaneous and independent operation of travel Attachment
drive, swing drive and work
Control type Hydraulic cylinders ______________ Liebherr cylinders with special seal system.
Attachment and Shock absorption
swing __________________________ proportional via joystick levers Pivots ______________________________ sealed, low maintenance
Travel __________________________ proportional via foot pedal Lubrication ________________________ via grease distributor and a grease nipple
Additional functions ______________ via switch and/or proportional foot pedals installed on the uppercarriage
Bucket ______________________________ standard equipped with 26,500 lb safety hook for
lifting
Option ______________________________ Liebherr quick change adapter
2 TD A 924 B Litronic
Dimensions
E
D A
W C
H
M T1
L
U1 B
V B1
X
I2 J2 J3 I3
T2 B T3 T1 B
U2 B2 U3 B3
B1
T4 T1 B
U4 B1
Tires 11.00-20
TD A 924 B Litronic 3
Backhoe Attachment
with Hydr. Adjustable Boom 12’9”
ft m
11
Digging Envelope 1 2 3 4
35
Stick length ft-in 6’10” 7’10” 8’10” 9’10”
10
30 9 Max. digging depth ft-in 19’ 2” 20’ 2” 21’ 2” 21’12”
Max. reach at ground level ft-in 29’ 8” 30’ 8” 31’ 8” 32’ 6”
8
25 Max. dumping height ft-in 22’ 2” 22’10” 23’ 5” 23’11”
7 Max. teeth height ft-in 32’ 8” 33’ 4” 33’11” 34’ 5”
0 0 Operating Weight
-1 The operating weight includes the basic machine with 8 tires plus
-5
-2 spacer rings, hydr. adjustable boom 12’9”, stick 6’10”, quick change
adapter 48 and bucket 1.30 cuyd.
-10 -3
Undercarriage versions Weight
-4
-15 A 924 B litronic` with prop up blade 47,850 lb
-5 A 924 B litronic` with 2 pt. outriggers 48,730 lb
1
-6 2 A 924 B litronic` with prop up blade + 2 pt. outriggers 50,950 lb
-20 3
4 A 924 B litronic` with 4 pt. outriggers 53,150 lb
-7
-25
-8
11 10 9 8 7 6 5 4 3 2 1 0 m
35 30 25 20 15 10 5 0 ft
Buckets
Cutting width in 15”1) 17”1) 19” 24” 24”2) 26” 33” 41” 49” 55” 55”
Capacity ISO 7451* cuyd 0.39 0.46 0.52 0.46 0.39 0.52 0.78 1.05 1.30 1.57 1.83
Max. material weight lb/cuyd 3000 3000 3000 3000 3000 3000 3000 3000 3000 2500 2000
Weights
Standard bucket with
Liebherr teeth Z 13 C lb – – – 1080 – 1210 1320 1410 1500 1980 2050
Bucket with cutting edge lb – – – 1060 – 1190 1390 1570 1760 1900 –
HD bucket with
Liebherr teeth Z 16 C3) lb – – – 1460 1870 1390 1630 1830 2100 2230 –
Bucket with ejector
and Bofors-teeth lb 820 860 900 – – – – – – – –
For machine stability per ISO 10567 the max. stick length is:
Stabilizers raised lb 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 7’10” – – 6’10”
Prop up blade down lb 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 6’10” 6’10” 7’10”
2 point outriggers down lb 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10”
Prop up blade + 2 point outr. down lb 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10”
4 point outriggers down lb 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10”
* comparable with SAE (heaped)
1) max. digging depth 4’7”, since bucket suspension is wider than bucket
2) Ripper bucket with Liebherr-teeth Z 16 P
3) It is recommended to use these buckets only with 4 point outriggers down
4 TD A 924 B Litronic
Lift Capacities
with Hydr. Adjustable Boom 12’9”
The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lbs, and can be lifted 360° on firm, level supporting sur-
face with blocked oscillating axle. Capacities shown in brackets are valid when the undercarriage is in longitudinal position and are established over the steering axle
(travel position) with stabilizers raised, and over rigid axle with stabilizers down. Capacities are valid with adjusting cylinder(s) in optimal position. Indicated loads are
based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (#). Maximum load for the quick change adapter’s load hook is
26,500 lb. Without quick change adapter, the lift capacities will increase by 500 lb, without bucket cylinder, link and lever they increase by an additional 770 lb. Lifting
capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook.
TD A 924 B Litronic 5
Backhoe Attachment
with Gooseneck Boom 18’6”
ft m
10 Digging Envelope 1 2 3 4
0 0
-1 Operating Weight
-5
-2
The operating weight includes the basic machine with 8 tires plus
-10 -3 spacer rings with gooseneck boom 18’6”, stick 6’10”, quick change
adapter 48 and bucket 1.30 cuyd.
-4
-15 Undercarriage versions Weight
-5
1
2 A 924 B litronic` with prop up blade 46,750 lb
-6 3
-20 4 A 924 B litronic` with 2 pt. outriggers 47,850 lb
-7 A 924 B litronic` with prop up blade + 2 pt. outriggers 49,800 lb
11 10 9 8 7 6 5 4 3 2 1 0 m A 924 B litronic` with 4 pt. outriggers 52,000 lb
35 30 25 20 15 10 5 0 ft
Buckets
Cutting width in 15”1) 17”1) 19” 24” 24”2) 26” 33” 41” 49” 55” 55”
Capacity ISO 7451* cuyd 0.39 0.46 0.52 0.46 0.39 0.52 0.78 1.05 1.30 1.57 1.83
Max. material weight lb/cuyd 3000 3000 3000 3000 3000 3000 3000 3000 3000 2500 2000
Weights
Standard bucket with
Liebherr teeth Z 13 C lb – – – 1080 – 1210 1320 1410 1500 1980 2050
Bucket with cutting edge lb – – – 1060 – 1190 1390 1570 1760 1900 –
HD bucket with
Liebherr teeth Z 16 C3) lb – – – 1460 1870 1390 1630 1830 2100 2230 –
Bucket with ejector
and Bofors-teeth lb 820 860 900 – – – – – – – –
For machine stability per ISO 10567 the max. stick length is:
Stabilizers raised ft-in 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 7’10” – – –
Prop up blade down ft-in 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 6’10” 6’10” 6’10”
2 point outriggers down ft-in 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10”
Prop up blade + 2 point outr. down ft-in 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10”
4 point outriggers down ft-in 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10” 9’10”
* comparable with SAE (heaped)
1) max. digging depth 4’7”, since bucket suspension is wider than bucket
2) Ripper bucket with Liebherr-teeth Z 16 P
3) It is recommended to use these buckets only with 4 point outriggers down
6 TD A 924 B Litronic
Lift Capacities
with Gooseneck Boom 18’6”
The lift capacities on the load hook of the Liebherr quick change adapter 48 without attachment are stated in lbs, and can be lifted 360° on firm, level supporting sur-
face with blocked oscillating axle. Capacities shown in brackets are valid when the undercarriage is in longitudinal position and are established over the steering axle
(travel position) with stabilizers raised, and over rigid axle with stabilizers down. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or
87 % of hydraulic capacity (#). Maximum load for the quick change adapter’s load hook is 26,500 lb. Without quick change adapter, the lift capacities will increase by
500 lb, without bucket cylinder, link and lever they increase by an additional 770 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity
and maximum permissible load of the load hook.
TD A 924 B Litronic 7
Clamshell Attachment
with Hydr. Adjustable Boom 12’9”
ft m
10
Digging Envelope 1 2 3 4
5
15
4
Camshell Model 10 B
0 0 Operating Weight
-1 The operating weight includes the basic machine with 8 tires plus
-5 spacer rings, hydr. adjustable boom 12’9”, stick 6’10”, quick change
-2
adapter 48 and the clamshell model 10 B/0.78 cuyd.
-10 -3 Undercarriage versions Weight
-7 1
2
-25 3
4
-8
10 9 8 7 6 5 4 3 2 1 0 m
30 25 20 15 10 5 0 ft
8 TD A 924 B Litronic
Clamshell Attachment
with Gooseneck Boom 18’6”
ft m
30 9 Digging Envelope 1 2 3 4
10 3
Camshell Model 10 B
0 0
-1 Operating Weight
-5
-2 The operating weight includes the basic machine with 8 tires plus
spacer rings, gooseneck boom 18’6”, stick 6’10”, quick change
-10 -3 adapter 48 and the clamshell model 10 B/0.78 cuyd.
-4 Undercarriage versions Weight
-15
-5 A 924 B litronic` with prop up blade 47,400 lb
-6
A 924 B litronic` with 2 pt. outriggers 48,500 lb
-20 A 924 B litronic` with prop up blade + 2 pt. outriggers 50,500 lb
1
2 A 924 B litronic` with 4 pt. outriggers 52,700 lb
-7 3
4
-25
-8
10 9 8 7 6 5 4 3 2 1 0 m
30 25 20 15 10 5 0 ft
TD A 924 B Litronic 9
Ditchcleaning Attachment
with Hydr. Adjustable Boom 12’9”
ft m
10
Digging Envelope 1 2 3 4
5
15
4
Operating Weight
10 3
The operating weight includes the basic machine with 8 tires plus
2 spacer rings, hydr. adjustable boom 12’9”, stick 6’10”, quick change
5 adapter 48 and ditchcleaning bucket 0.92 cuyd.
1
Undercarriage versions Weight
0 0
A 924 B litronic` with prop up blade 47,400 lb
-1 A 924 B litronic` with 2 pt. outriggers 48,500 lb
-5 A 924 B litronic` with prop up blade + 2 pt. outriggers 50,500 lb
-2
A 924 B litronic` with 4 pt. outriggers 52,700 lb
-10 -3
-4
-15
-5 1
2
3
-20 -6 4
-7
10 9 8 7 6 5 4 3 2 1 0 m
35 30 25 20 15 10 5 0 ft
10 TD A 924 B Litronic
Ditchcleaning Attachment
with Gooseneck Boom 18’6”
ft m
10
Digging Envelope 1 2 3 4
5
15
4
Operating Weight
10 3
The operating weight includes the basic machine with 8 tires plus
2 spacer rings, gooseneck boom 18’6”, stick 6’10”, quick change
5 adapter 48 and ditchcleaning bucket 0.92 cuyd.
1
Undercarriage versions Weight
0 0
A 924 B litronic` with prop up blade 46,400 lb
-1 A 924 B litronic` with 2 pt. outriggers 47,500 lb
-5 A 924 B litronic` with prop up blade + 2 pt. outriggers 49,500 lb
-2
A 924 B litronic` with 4 pt. outriggers 51,700 lb
-10 -3
-4
-15 1
-5 2
3
4
-20 -6
-7
10 9 8 7 6 5 4 3 2 1 0 m
30 25 20 15 10 5 0 ft
TD A 924 B Litronic 11
Equipment
Undercarriage S O Operator’s Cab S O
Two circuit travel brake with accumulator • Storage tray •
Wide tires • Displays for engine operating condition •
Travel motor protection • Mechanical hour meters, readable from outside the cab •
Clam travel bracket with outriggers/prop-up blade down on one side only • Roof hatch
Creeper speed electrically switchable from cab • All-round adjustable roof vent •
New tires • 6-way adjustable seat •
Service free parking brake inside transmission • Airpressure operator seat with heating and head-rest •
Independent outrigger control • Seat and consoles independently adjustable •
Choice of tires • Extinguisher •
Auto check valve directly on each stabilizer cylinder • Removable customized foot mat •
Proportional power steering with mechanical back up • Dome light •
Customized colors • Inside rear mirror •
Lockable storage box Cab heater with defroster •
Two lockable storage boxes • Cloth hook •
Lockable storage box additional Air conditioning •
Two-speed power shift transmission • Electric cool box •
Steering wheel adjustable •
Bullet proof window (fixed installation – can not be opened) •
Stereo radio •
Preparation for radio installation •
Uppercarriage S O
Rain hood over front window opening •
Printed in Germany by BVD RG-BK-RP LHB/VF 8420910-2-08.03 Illustrations and data may differ from standard equipment. Subject to change without notice.
Beacon •
Electric fuel tank filler pump • All tinted windows •
Maintenance-free swing brake lock • Door with sliding window •
Handrails, Non slip surfaces • Optical and acoustical warning if outriggers are not fully retracted •
Main switch for electric circuit • Auxiliary heating •
Engine hood with lift help • Sun shade •
Pedal controlled positioning swing brake • Sun roller blind
Reverse travel warning system • Electronic drive away lock •
Sound insulation • Wiper/washer •
Customized colors • Cigarette lighter and ashtray •
Pin lock upper/lower • Additional flood lights •
Maintenance-free HD-batteries •
Extended tool kit •
Lockable tool box •
Tool kit •
Attachment S O
Flood lights on boom •
Offset feature for complete attachment
Hydraulics S O
Hydr. lines for clam operation on stick
Sealed pivots
•
•
Hydraulic tank shut-off valve • Safety lift hook on hoe buckets •
Extra hydr. control for hydr. swivel • Liebherr line of clams •
Pressure compensation • Likufix •
Hook up for pressure checks • Safety check valves on hoist cylinder •
Pressure storage for controlled lowering of attachments with engine turned off • Safety check valves on stick cylinder •
Filter with partial micro filteration (5 µm) • SAE-dbl flange connection for all hi-pressure lines •
Electronic pump regulation • Hose quick connection •
Stepless mode system (ECO) • Centralized lube points •
Flow compensation • Hydraulic or manual quick change tool adapter •
Four mixed modes, can also be adjusted • Customized colors •
Full flow micro filtration • Special buckets and other tools •
Bio degradable hydraulic oil • Overload warning device •
Pressure compensation Two way valves for bucket/clam use •
Flow summation Locking of connections for clam operation •
Additional hydraulic circuits • Y-flange seals at bucket/stick pivot •
Cylinders with shock absorber •
Engine S O
Turbo charger •
Direct injection •
Cold start aid •
Sensor controlled engine idling •
Air filter with pre-cleaner main- and safety element •
S = Standard, O = Option
Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the
knowledge and approval of Liebherr to retain warranty.