Machine for Industrial Applications R 944 C

litronic`

Operating Weight: 101,604 – 103,808 lb

Engine Output: 258 hp / 190 kW
 Technical Data
Engine Swing Drive
Rating per ISO 9249 ____________ 258 hp (190 kW) at 1800 rpm Drive by ____________________________ Liebherr swash plate motor
Model ______________________________ Liebherr D 936 L Transmission ______________________ Liebherr compact planetary reduction gear
Type ________________________________ 6 cylinder in-line Swing ring ________________________ Liebherr, sealed single race ball bearing swing
Bore/Stroke __________________ 4.8/6.1 in ring, internal teeth
Displacement ______________ 641 in3 Swing speed ______________________ 0 – 8 rpm step less
Engine operation ________________ 4-stroke diesel Swing torque ______________________ 92,275 lbf ft
unit pump system Holding brake ____________________ wet multi-disc (spring applied, pressure released)
turbo-charged and after-cooled Option ______________________________ pedal controlled positioning brake
reduced emissions
Cooling ____________________________ water-cooled and integrated motor oil cooler
Air cleaner ________________________ dry-type air cleaner with pre-cleaner, primary and
safety elements, automatic dust discharge
Fuel tank __________________________ 174 gal Operator’s Cab
Standard __________________________ sensor controlled engine idling
Electrical system Cab ________________________________ built
from deep drawn components, resiliently
Voltage ________________________ 24 V mounted, sound insulated, tinted windows, front
Batteries ______________________ 2 x 170 Ah/12 V window stores overhead, door with sliding
Starter ________________________ 24 V/6.6 kW window
Alternator ____________________ three phase current 28 V/80 A Operator’s seat __________________ shock absorbing suspension, adjustable to
operator’s weight, 6-way adjustable seat
Joysticks __________________________ integrated into adjustable seat consoles
Monitoring ________________________ menu driven query of current operating condi-
tions via the LCD display. Automatic monitoring,
Hydraulic System display, warning (acoustical and optical signal)
and saving machine malfunction data, for exam-
Hydraulic pump ple, engine overheating, low engine oil pressure
for attachment and or low hydraulic oil level
travel drive __________________ two Liebherr variable flow, swash plate pumps Heating system __________________ standard air conditioning, combined cooler/
Max. flow ____________________ 2 x 80 gpm heater, additional dust filter in fresh air/recircu-
Max. pressure ______________ 5,075 psi lated
Pump regulation __________________ electro-hydraulic with electronic engine speed Noise emission
sensing regulation, pressure compensation, flow ISO 6396 __________________________ LpA (inside cab) = 75 dB(A)
compensation, automatic oil flow optimizer 2000/14/EC ________________________ LWA (surround noise) = 105 dB(A)
Hydraulic pump
for swing drive ______________ reversible, variable flow, swash plate pump,
closed-loop circuit
Max. flow ____________________ 54 gpm
Max. pressure ______________ 5,800 psi Undercarriage
Hydraulic tank ____________________ 121 gal
Hydraulic system ________________ 187 gal Version EW ________________________ special duty, extra wide gauge
Hydraulic oil filter ________________ 2 full flow filters in return line with integrated fine Drive ________________________________ Liebherr swash plate motors with integrated
filter area (5 µm) brake valves on both sides
Hydraulic oil cooler ______________ cooler unit, consisting of radiator for engine Transmission ______________________ Liebherr planetary reduction gears
coolant with after-cooler core, for hydraulic fluid Travel speed ______________________ low range – 2.0 mph
with hydrostatically controlled fan drive high range – 3.1 mph
MODE selection __________________ adjustment of machine performance and the Drawbar pull max. ________________ 75,533 lbf
hydraulics via a mode selector to match applica- Track components ______________ D 7, maintenance-free
tion Track rollers/Carrier rollers ______ 9/2
ECO __________________________ for economical and environmentally friendly Tracks ______________________________ sealed and greased
operation Track pads ________________________ triple grouser
POWER ______________________ for maximum digging power and heavy duty jobs Digging locks ______________________ wet multi-discs (spring applied, pressure
LIFT __________________________ for lifting released)
FINE __________________________ for precision work and lifting Brake valves ______________________ integrated into travel motor
RPM adjustment __________________ step less adjustment of engine output via rpm at
each selected mode
Liebherr Tool Control ____________ ten pre-adjustable pump flows and pressures for
add on tools (option)
Attachment
Type ________________________________ high-strengthsteel plates at 3 high-stress points
for the toughest requirements. Complex and
Hydraulic Controls stable mountings of attachment and cylinders.
Unrivalled strength, even at high loads
Power distribution ______________ via
monoblock control valve with integrated Hydraulic cylinders ______________ Liebherr cylinders with special seal system.
safety valves Shock absorption
Flow summation ____________ to
boom and stick Pivots ______________________________ sealed, low maintenance
Closed-loop circuit ________ for uppercarriage swing drive Lubrication ________________________ Liebherr semi-automatic central lubrication
Servo circuit system
Attachment and swing ____ – proportional via joystick levers
Travel ________________________ – proportional via foot pedals or removable hand
levers
– speed pre-selection
Additional functions ____________ via foot pedals or joystick toggle switch

2 R 944 C Litronic Machine for Industrial Applications

 Dimensions
E
D A

W C
H

K P
Q

L N
U S
Z B
V G

ft in Industrial-Type Straight Boom 31’2”

A Upper – overall width 10’ 1” and Industrial Stick 23’11”
C Basic machine – height overall 11’11” V ft in 21’ 4”
D Tail reach 11’ 7” W ft in 11’ ”
E Tail swing 11’ 7” X ft in 44’ 3”
H Height – engine hood 9’ 6”
K Clearance under counterweight 4’ 4” Industrial-Type Gooseneck Boom 31’2”
L Center idler to center sprocket 13’ 1” and Industrial Stick 23’11”
P Track height 3’ 8” V ft in 20’ 4”
Q Ground clearance 21” W ft in 11’10”
S Track gauge 11’10” X ft in 44’ ”
U Track length 16’ 2”
N Pad width 20” ’24” ’30”
B Track outside width 13’ 9” 13’ 9” 14’ 3”
G Undercarriage width overall 14’ 6” 14’ 6” 14’ 6”
Z Length track to counterweight 19’ 7”
E = Tail radius

E
D A

W C
H

K P
Q

L N
U S
Z B
V G

These dimensions are stated with cab carrier. This assembly is only valid for transportation.

R 944 C Litronic Machine for Industrial Applications 3

 VarioLiftPlus
Variable Boom Mounting Positions for Optimised Lift Capacities
with the same working range with a different working range

Hole A
2A

Hole B
2A 3B

3B
Hole 3
Version 2A
Hole 2 3A

Kinematic variant 2A: Kinematic variant 3A:

Increased lift capacities above ground level Altered range curve with additional reach
Kinematic variant 3B: depth, e.g. for unloading from ships
Increased lift capacities below ground level
and when working at extended reach

with a different working range

Hole D

3D
Hole C

3D

Hole 3
3C
Hole 2 Version 3D

Kinematic variant 3D: Kinematic variant 3C:

Increased lift capacities below ground level Altered range curve with additional reach
and when working at extended reach depth, e.g. for unloading from ships

4 R 944 C Litronic Machine for Industrial Applications

 Industrial Attachment
with Industrial-Type Straight Boom 31’2”
ft m ft m

60 18 60 18

16 16
50 50
14 14

40 12 40 12

10 10
30 30
8 8

20 6 20 6

4 4
10 10
2 2

0 0 0 0

-2 -2
-10 -10
-4 -4
1 1
2
-20 -6 -20 -6

2 3
-8 -8
4
-30 -30
-10
18 16 14 12 10 8 6 4 2 0m 18 16 14 12 10 8 6 4 2 0m
60 50 40 30 20 10 0 ft 60 50 40 30 20 10 0 ft

Attachment Envelope Attachment Envelope

Kinematic variant 2A Kinematic variants 3A/3B
1 with industrial stick 23’11” 1 with industrial stick 23’11” (3B)
2 with industrial stick 23’11” and grapple model 70 C 2 with industrial stick 23’11” (3A)
3 with industrial stick 23’11” and grapple model 70 C (3B)
4 with industrial stick 23’11” and grapple model 70 C (3A)

Operating Weight
and Ground Pressure
Operating weight includes basic machine with rigid cab elevation
3’11” and counterweight 24,244 lb, industrial-type straight boom
31’2”, industrial stick 23’11” and grapple model 70 C with 5 semi-
closed tines 1.05 yd3.
Undercarriage EW

Pad width in 24” 30”

Weight lb 101,631 102,954
Ground pressure psi 12.7 10.2

R 944 C Litronic Machine for Industrial Applications 5

 Lift Capacities
with Industrial-Type Straight Boom 31’2”

Industrial Stick 23’11” (Variant 2A)

15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft 50 ft
Under-
ft carriage ft in
60 EW 27,770* 27,770* 27,770* 27,770* 14’10”
55 EW 27,330* 27,330* 22,922* 22,922* 20,277* 20,277* 26’ 7”
50 EW 26,228* 26,228* 22,922* 22,922* 17,632* 17,632* 33’10”
45 EW 25,566* 25,566* 22,481* 22,481* 19,395. 20,056* 14,987. 15,869. 39’ 1”
40 EW 25,346* 25,346* 22,260* 22,260* 19,836* 19,836* 15,428 16,089 12,563. 13,224. 43’ 2”
35 EW 25,566* 25,566* 22,260* 22,260* 19,616. 19,616* 15,428 16,089 12,122 12,783. 11,020. 11,461. 46’ 5”
30 EW 26,007* 26,007* 22,481* 22,481* 19,395. 19,836. 15,208 16,089 12,122 12,783. 9,918. 10,359. 48’11”
25 EW 31,517* 31,517* 26,668* 26,668* 22,922* 22,922* 18,734. 19,836. 14,767 15,648 11,902 12,563. 9,698 10,138 9,036. 9,477. 50’10”
20 EW 30,856* 30,856* 33,721* 33,721* 27,770* 27,770* 23,362. 23,583* 18,073. 18,954. 14,326 15,208 11,681 12,342. 9,477 10,138 8,375. 9,036. 52’ 2”
15 EW 47,386* 47,386* 35,705* 35,705* 28,652* 28,652* 22,040. 23,142. 17,191. 18,073. 13,885 14,546 11,240 11,902. 9,257 9,918 7,934. 8,596. 53’ 1”
10 EW 50,251* 50,251* 37,027* 37,027* 27,109. 28,652. 20,497. 21,820. 16,310. 17,191. 13,224 13,885 10,800 11,461. 9,036 9,698 7,714. 8,375. 53’ 6”
5 EW 16,530* 16,530* 34,382. 36,807. 24,905. 26,668. 19,175. 20,497. 15,428. 16,310. 12,563 13,224 10,359 11,020. 8,816 9,477 7,714. 8,155. 53’ 5”
0 EW 13,885* 13,885* 31,958. 34,162. 23,362. 24,905. 18,073. 19,175. 14,546. 15,428. 12,122 12,783 10,138 10,800. 8,596 9,257 7,714. 8,155. 52’11”
– 5 EW 15,428* 15,428* 30,415. 30,636* 22,260. 23,803. 17,412. 18,514. 14,106. 14,987. 11,681 12,342 9,918 10,579. 8,596 9,036 7,494* 7,494* 51’ 9”
– 10 EW 26,007* 26,007* 21,599. 22,260* 16,750. 18,073. 13,665. 14,546. 11,461 12,122 9,698 10,138* 8,155* 8,155* 47’ 7”
– 15 EW 17,632* 17,632* 15,208* 15,208* 12,563* 12,563* 10,138* 10,138* 39’ 4”
– 20 EW
– 25 EW

Industrial Stick 23’11” (Variant 3A)

15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft 50 ft
Under-
ft carriage ft in
60 EW
55 EW
50 EW 18,514* 18,514* 17,412* 17,412* 35’ 1”
45 EW 18,293* 18,293* 14,987 15,648 14,326. 14,987. 40’ 2”
40 EW 18,073* 18,073* 15,208 16,089 11,902. 12,563. 44’ 2”
35 EW 18,073* 18,073* 15,208 16,089 12,122 12,783 10,579. 11,020. 47’ 3”
30 EW 18,514* 18,514* 14,987 16,089 12,122 12,783 9,698 10,138 9,477. 9,918. 49’ 8”
25 EW 21,158* 21,158* 18,514. 18,954* 14,767 15,428 11,902 12,563 9,477 10,138 8,596. 9,257. 51’ 6”
20 EW 25,566* 25,566* 22,260* 22,260* 17,852. 18,734. 14,106 14,987 11,461 12,122 9,477 9,918 8,155. 8,596. 52’10”
15 EW 44,962* 44,962* 33,942* 33,942* 27,550. 27,500* 21,599. 22,922. 16,971. 17,852. 13,665 14,326 11,020 11,681 9,257 9,698 7,714. 8,375. 53’ 8”
10 EW 33,721* 33,721* 37,027. 37,248* 26,448. 27,991. 20,056. 21,379. 15,869. 16,971. 13,004 13,665 10,579 11,240 8,816 9,477 7,494. 8,155. 54’ ”
5 EW 13,665* 13,665* 33,501. 35,925. 24,464. 26,007. 18,734. 20,056. 14,987. 15,869. 12,342 13,004 10,359 11,020 8,596 9,257 7,494. 7,934. 53’10”
0 EW 12,783* 12,783* 31,076. 31,738* 22,701. 24,244. 17,632. 18,954. 14,326. 15,208. 11,902 12,563 9,918 10,579 8,375 9,036 7,494. 7,934. 53’ 4”
– 5 EW 14,987* 14,987* 28,432* 28,432* 21,820. 23,362. 16,971. 18,073. 13,665. 14,546. 11,461 12,122 9,698 10,359 8,375 8,816 7,714. 8,155. 52’ 3”
– 10 EW 18,073* 18,073* 29,313* 29,313* 21,158. 22,701. 16,530. 17,632. 13,444. 14,326. 11,240 11,902 9,477 10,138 8,375 8,816 8,155. 8,596. 50’ 9”
– 15 EW 29,534. 31,738* 21,158. 22,701. 16,310. 17,632. 13,224. 14,106. 11,240 11,902 9,698 10,138 9,036. 9,698. 46’ 9”
– 20 EW 16,530. 17,632. 13,444. 14,326. 12,342. 13,224. 36’ 7”
– 25 EW

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities are stated in pounds (lb) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are
valid for 24” wide triple grouser pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic
capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.

6 R 944 C Litronic Machine for Industrial Applications

 Lift Capacities
with Industrial-Type Straight Boom 31’2”

Industrial Stick 23’11” (Variant 3B)

15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft 50 ft
Under-
ft carriage ft in
60 EW
55 EW 22,260* 22,260* 19,836* 19,836* 28’ 3”
50 EW 20,718* 20,718* 18,954* 18,954* 17,852* 17,852* 17,412* 17,412* 35’ 1”
45 EW 19,836* 19,836* 18,293* 18,293* 16,971* 16,971* 14,987 15,648 14,326. 14,987. 40’ 2”
40 EW 18,073* 18,073* 16,750* 16,750* 15,428 15,869* 11,902. 12,563. 44’ 2”
35 EW 19,836* 19,836* 18,073* 18,073* 16,750* 16,750* 15,428 15,648* 12,122 12,783 10,579. 11,020. 47’ 3”
30 EW 20,718* 20,718* 18,734* 18,734* 17,191* 17,191* 15,208 15,869* 12,122 12,783 9,698 10,138 9,477. 9,918. 49’ 8”
25 EW 25,126* 25,126* 22,040* 22,040* 19,616* 19,616* 17,632* 17,632* 14,767 15,428 11,902 12,563 9,698 10,138 8,596. 9,257. 51’ 6”
20 EW 31,297* 31,297* 28,211* 28,211* 23,803* 23,803* 20,718* 20,718* 17,852. 18,514* 14,106 14,987 11,461 12,122 9,477 9,918 8,155. 8,596. 52’10”
15 EW 41,656* 41,656* 31,738* 31,738* 25,787* 25,787* 21,599. 22,040* 16,971. 17,852. 13,665 14,326 11,020 11,681 9,257 9,698 7,714. 8,375. 53’ 8”
10 EW 33,721* 33,721* 35,264* 35,264* 26,448. 27,770* 20,277. 21,379. 15,869. 16,971. 13,004 13,665 10,579 11,240 9,036 9,477 7,494. 8,155. 54’ ”
5 EW 13,665* 13,665* 33,501. 35,925. 24,464. 26,007. 18,734. 20,056. 14,987. 16,089. 12,342 13,004 10,359 11,020 8,596 9,257 7,494. 7,934. 53’10”
0 EW 12,783* 12,783* 31,297. 31,738. 22,922. 24,464. 17,852. 18,954. 14,326. 15,208. 11,902 12,563 9,918 10,579 8,375 9,036 7,494. 7,934. 53’ 4”
– 5 EW 14,987* 14,987* 28,432* 28,432* 21,820. 23,362. 16,971. 18,073. 13,665. 14,767. 11,461 12,122 9,698 10,359 8,375 8,816 7,714. 8,375. 51’ 9”
– 10 EW 29,313* 29,313* 21,379. 22,922. 16,530. 17,632. 13,444. 14,326. 11,240 11,902 9,477 10,138 8,816. 9,477. 47’ 3”
– 15 EW 16,530. 17,632. 13,224. 14,326. 11,902. 12,783. 37’ 5”
– 20 EW
– 25 EW

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities are stated in pounds (lb) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are
valid for 24” wide triple grouser pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic
capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.

R 944 C Litronic Machine for Industrial Applications 7

 Industrial Attachment
with Industrial-Type Gooseneck Boom 31’2”
ft m
60 18
Attachment Envelope
Kinematic variants 3C/3D
16
50 1 with industrial stick 23’11” (3D)
2 with industrial stick 23’11” (3C)
14
3 with industrial stick 23’11” and grapple model 70 C (3D)
4 with industrial stick 23’11” and grapple model 70 C (3C)
40 12

10
30
8 Operating Weight
and Ground Pressure
20 6
Operating weight includes basic machine with rigid cab elevation
4 3’11” and counterweight 24,244 lb, industrial-type gooseneck boom
10 31’2”, industrial stick 23’11” and grapple model 70 C with 5 semi-
closed tines 1.05 yd3.
2
Undercarriage EW
0 0
Pad width in 24” 30”
-2 Weight lb 102,513 103,836
-10 Ground pressure psi 12.8 10.4
-4

1
-20 -6
2
-8
3
-30
-10 4

18 16 14 12 10 8 6 4 2 0m

60 50 40 30 20 10 0 ft

8 R 944 C Litronic Machine for Industrial Applications

 Lift Capacities
with Industrial-Type Gooseneck Boom 31’2”

Industrial Stick 23’11” (Variant 3C)

15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft 50 ft
Under-
ft carriage ft in
60 EW
55 EW
50 EW
45 EW
40 EW 12,563* 12,563* 12,563* 12,563* 41’10”
35 EW 12,342* 12,342* 12,342* 12,342* 11,902. 12,342* 45’ 1”
30 EW 13,224* 13,224* 12,563* 12,563* 12,342* 12,342* 10,579. 11,240. 47’ 8”
25 EW 13,885* 13,885* 13,004* 13,004* 12,122. 12,563* 9,698 10,359 9,698. 10,138. 49’ 6”
20 EW 16,089* 16,089* 14,767* 14,767* 13,665* 13,665* 11,681. 12,342. 9,698 10,138 9,036. 9,477. 50’11”
15 EW 24,685* 24,685* 20,497* 20,497* 17,632* 17,632* 15,869* 15,869* 13,885. 14,546* 11,240. 11,902. 9,257 9,918 8,375. 9,036. 51’ 9”
10 EW 40,333* 40,333* 29,093* 29,093* 23,142* 23,142* 19,395* 19,395* 16,310. 16,971* 13,224. 13,885. 10,800. 11,461. 9,036 9,477 8,155. 8,596. 52’ 1”
5 EW 22,040* 22,040* 33,060* 33,060* 24,905. 25,566* 19,175. 20,497* 15,428. 16,310. 12,563. 13,224. 10,359. 11,020. 8,596 9,257 7,934. 8,375. 52’ ”
0 EW 18,514* 18,514* 31,517. 33,721. 23,142. 24,685. 17,852. 19,175. 14,546. 15,428. 11,902. 12,783. 9,918. 10,579. 8,375 9,036 7,934. 8,375. 51’ 5”
– 5 EW 19,395* 19,395* 29,754. 32,178. 21,820. 23,362. 16,971. 18,073. 13,885. 14,767. 11,461. 12,122. 9,698. 10,359. 8,155 8,816 7,934. 8,596. 50’ 4”
– 10 EW 21,379* 21,379* 29,093. 31,297. 21,158. 22,701. 16,530. 17,632. 13,224. 14,326. 11,020. 11,902. 9,477. 10,138. 8,375. 8,816. 48’ 9”
– 15 EW 23,583* 23,583* 28,872. 31,297. 20,718. 22,260. 16,089. 17,191. 13,004. 14,106. 11,020. 11,681. 9,477. 10,138. 8,816. 9,477. 46’ 6”
– 20 EW 29,313. 31,517. 20,938. 22,481. 16,089. 17,412. 13,224. 14,106. 11,020. 11,681. 9,698. 10,359. 43’ 8”
– 25 EW 16,530. 17,632. 13,885. 14,987. 33’ 4”

Industrial Stick 23’11” (Variant 3D)

15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft 50 ft
Under-
ft carriage ft in
60 EW
55 EW
50 EW 16,750* 16,750* 16,310* 16,310* 32’ 1”
45 EW 16,089* 16,089* 15,208* 15,208* 14,987* 14,987* 37’ 8”
40 EW 14,987* 14,987* 14,326* 14,326* 13,885. 14,106* 41’10”
35 EW 15,869* 15,869* 14,987* 14,987* 14,326* 14,326* 12,563 13,224 11,902. 12,563. 45’ 1”
30 EW 16,530* 16,530* 15,428* 15,428* 14,326* 14,326* 12,342 13,004 10,579. 11,240. 47’ 8”
25 EW 19,175* 19,175* 17,412* 17,412* 15,869* 15,869* 14,767* 14,767* 12,122 12,783 9,698 10,359 9,698. 10,138. 49’ 6”
20 EW 24,685* 24,685* 21,158* 21,158* 18,514* 18,514* 16,750* 16,750* 14,546. 15,428* 11,681 12,342 9,477 10,138 8,816. 9,477. 50’11”
15 EW 37,468* 37,468* 28,432* 28,432* 23,362* 23,362* 20,056* 20,056* 17,412. 17,632* 13,885. 14,767. 11,240 11,902 9,257 9,918 8,375. 9,036. 51’ 9”
10 EW 44,962* 44,962* 32,399* 32,399* 25,787* 25,787* 20,718. 21,599* 16,310. 17,191. 13,224. 13,885. 10,800 11,461 9,036 9,477 8,155. 8,596. 52’ 1”
5 EW 22,040* 22,040* 34,162. 35,705* 24,905. 26,448. 19,175. 20,277. 15,428. 16,310. 12,563. 13,224. 10,359 11,020 8,596 9,257 7,934. 8,375. 52’ ”
0 EW 18,514* 18,514* 31,517. 33,721. 23,142. 24,685. 17,852. 19,175. 14,546. 15,428. 11,902. 12,563. 9,918 10,579 8,375 9,036 7,934. 8,375. 51’ 5”
– 5 EW 19,395* 19,395* 29,754. 32,178. 21,820. 23,362. 16,971. 18,073. 13,885. 14,767. 11,461. 12,122. 9,698 10,359 8,155 8,816 7,934. 8,596. 50’ 4”
– 10 EW 21,379* 21,379* 29,093. 31,297. 21,158. 22,701. 16,530. 17,632. 13,224. 14,326. 11,020. 11,902. 9,477 10,138 8,375. 8,816. 48’ 9”
– 15 EW 28,872. 31,297. 20,718. 22,260. 16,089. 17,191. 13,004. 14,106. 11,020. 11,681. 9,477 10,138 8,816. 9,477. 46’ 3”
– 20 EW 13,665. 14,767. 33’ 4”
– 25 EW

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities are stated in pounds (lb) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are
valid for 24” wide triple grouser pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic
capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.

R 944 C Litronic Machine for Industrial Applications 9

 Choice of Cab Elevation
and Cab Protection
D
Rigid Cab Elevation
Height 3’11” ft in 6’7” ft in
B 13’ 1” ft in 15’9” ft in
C C 14’ 9” ft in 17’4” ft in
B
D 2’ 2” ft in 2’2” ft in
Weight includes basic machine with pad width 24”
80,467 lb 80,908 lb

D2
D Hydraulic Cab Elevation
B1 9’ 2” ft in
B2 17’ 4” ft in
C1 10’10” ft in
C2 19’ ” ft in
D1 4’ 9” ft in
C2
B2 D2 5’ 7” ft in
E 10’ 6” ft in
C1 B1 E
Weight includes basic machine
with pad width 24” 82,892 lb

D2
D Hydraulic Cab Elevation
(Parallelogram)
+ Intermediate Piece 1’7”
B1 10’ 4” ft in
B2 21’ 6” ft in
C2 C1 11’11” ft in
B2 C2 23’ 2” ft in
D1 8’ 2” ft in
C1 B1 E D2 8’ 2” ft in
E 11’11” ft in
Weight includes basic machine
with pad width 24” 83,774 lb

FOPS Guard Front Guard

10 R 944 C Litronic Machine for Industrial Applications

 Variety of Tools
Multiple Tine Grapples open tines semi-closed tines closed tines
Grapple Model 69 Capacity yd3 1.05 1.44 1.05 1.44 1.05 1.44
(4 tines) Weight lb 2,965 3,075 3,384 3,615 4,188 4,541
Grapple Model 70 C Capacity yd3 1.05 1.44 1.05 1.44 1.05 1.44
(5 tines) Weight lb 3,273 3,505 3,758 4,100 4,299 4,398

Crane Hook with Suspension

Max.load lb 27,557
Height with suspension ft in 3’
Total weight lb 211

Electromagnets with Suspension

Magnet information on request

For further information see color brochure “Add-on tools for material-handling technology”. To operate a magnet the installation of a generator is
required; please contact your Liebherr dealer or the factory for further information.

R 944 C Litronic Machine for Industrial Applications 11

 Equipment
Undercarriage S O Operator’s Cab S O

Printed in Germany by Geiselmann RG-BK LFR/SP 10356699-1-01.08 Illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 9248.
Two-speed travel • Roof hatch •
Track guides on idler end • Tinted windows •
Life time lubricated track rollers • Right window made of one piece (without post) •
Travel drive completely integrated into the undercarriage frame • Door with sliding window •
Tracks sealed and greased • Rain hood over front window opening •
Track guides at sprocket and in center • Wiper/washer •
Reinforced base-plate center-piece • Emergecy exit rear window •
Conversion kit – Track D 7 to D 7 G • Sun roller blind •
Seat and consoles independently adjustable
(6-way adjustable seat) •
Storage tray •
Closed storage space •
Uppercarriage S O Coat hook •
Engine hood with lift cylinder • Removable customized foot mat •
Lockable tool box • Dome light •
Handrails, non slip surfaces • Inside rear mirror •
Tool kit • Cigarette lighter and ashtray •
Maintenance-free swing brake lock • Seat belt •
Maintenance-free HD-batteries • Mechanical hour meters, readable from outside the cab •
Main switch for electric circuit • Displays for engine operating condition •
Sound insulation • Automatic air conditioning with defroster •
Electric fuel tank filler pump • Preparation for radio installation •
Foot pedal swing positioning brake • Stereo radio •
Extended tool kit • Electric cooler •
Customized colors • Auxiliary heating •
Additional flood lights •
Wiper in lower front window •
Roof window wiper •
Bullet proof window (fixed installation – can not be opened) •
Hydraulics S O FOPS Protection •
Electronic pump regulation • Air pressure operator seat with heating and head-rest •
Stepless work mode selector • Electronic theft protection •
Pressure storage for controlled lowering of attachments with Beacon •
engine turned off • Extinguisher •
Hydraulic tank shut-off valve •
Pressure compensation •
Flow compensation •
Filter with integrated fine filter area (5 µm) •
Pressure test ports • Attachment S O
Additional hydraulic circuits • Flood lights •
Bio-degradable hydr. oil • Hydr. lines for clam operation in stick •
Filter for secondary circuit • Sealed pivots •
Liebherr semi-automatic central lubrication system •
Safety check valves on hoist cylinder, regenerative •
Safety check valves on stick cylinder, regenerative •
Hose quick connection •
Engine S O Cylinders with shock absorber •
Unit pump system • Industrial-type gooseneck sticks with remote hydraulic pin
Turbo-charged and after-cooled, reduced emissions • puller •
Dry-type air cleaner w/pre-cleaner, main and safety element • Safety lift hook •
Sensor controlled engine idling • Liebherr line of clams •
Engine cold starting aid • Liebherr fully-automatic central lubrication system •
Customized colors •
Overload warning device •

S = Standard, O = Option

Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the
knowledge and approval of Liebherr to retain warranty.

Liebherr Construction Equipment Co.

4100 Chestnut Avenue, Newport News, VA 23607, USA
콯 (7 57) 2 45 52 51, Fax (7 57) 9 28 87 01
www.liebherr.us, E-Mail: info.lce@liebherr.com