Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
169 views

Digital Signal Processing Assignment For Final - Solution

This document contains an assignment for a digital signal processing course. It provides 5 questions asking the student to: 1) Design a bandpass FIR filter with given cut-off frequencies and window. 2) Determine the impulse response of a filter with a given desired frequency response using frequency sampling. 3) Obtain the system function of a digital filter by approximating the derivatives of an analog filter's system function. 4) Obtain the system function of an IIR digital filter using impulse invariance from an analog filter's system function. 5) Obtain the system function of an IIR digital filter using bilinear transformation from an analog filter's system function, where the filter is resonant at a given frequency.

Uploaded by

Majid Mehmood
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
169 views

Digital Signal Processing Assignment For Final - Solution

This document contains an assignment for a digital signal processing course. It provides 5 questions asking the student to: 1) Design a bandpass FIR filter with given cut-off frequencies and window. 2) Determine the impulse response of a filter with a given desired frequency response using frequency sampling. 3) Obtain the system function of a digital filter by approximating the derivatives of an analog filter's system function. 4) Obtain the system function of an IIR digital filter using impulse invariance from an analog filter's system function. 5) Obtain the system function of an IIR digital filter using bilinear transformation from an analog filter's system function, where the filter is resonant at a given frequency.

Uploaded by

Majid Mehmood
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Assignment for Final_Solution

ES-425 Digital Signal Processing

(CLO_4): (Cognitive Level C3, i.e., Applying) (PLO_3, i.e., Design)

Q 1: Design the bandpass linear phase FIR filter having cut-off frequencies of 𝜔𝑐1 = 1 𝑟𝑎𝑑/𝑠𝑎𝑚𝑝𝑙𝑒 and
𝜔𝑐2 = 2 𝑟𝑎𝑑/𝑠𝑎𝑚𝑝𝑙𝑒. The desired frequency response of the filter is given as

−𝑗𝜔𝜏
𝐻𝑑 (𝜔) = {𝑒 𝑓𝑜𝑟 𝜔𝑐1 ≤ |𝜔| ≤ 𝜔𝑐2
0 𝑜𝑡ℎ𝑒𝑟𝑤𝑖𝑠𝑒

Obtain the unit sample response using following window


1 𝑓𝑜𝑟 0 ≤ 𝑛 ≤ 6
𝑤(𝑛) = {
0 𝑜𝑡ℎ𝑒𝑟𝑤𝑖𝑠𝑒
𝑀−1
Note that for linear phase FIR filter, 𝜏 =
2

Solution:

Page 1 of 6
Page 2 of 6
Q 2: Using frequency sampling method determine the impulse responseℎ(𝑛) of a filter having desired
frequency response
−𝑗(𝑁−1)𝜔 𝜋
𝑒 2 𝑓𝑜𝑟 0 ≤ |𝜔| ≤
𝐻𝑑 (𝜔) = { 2
𝜋
0 𝑓𝑜𝑟 ≤ |𝜔| ≤ 𝜋
2
Assume filter length is 7.

Page 3 of 6
Q 3: Obtain the system function of the digital filter by approximation of derivatives if the system
function of the analog filter is as follows:
1
𝐻𝑎 (𝑠) =
(𝑠 + 0.1)2 + 9

Solution:

Page 4 of 6
Q 4: The system function of the analog filter is given as
𝑠 + 0.1
𝐻𝑎 (𝑠) =
(𝑠 + 0.1)2 + 9

Obtain the system function of the IIR digital filter by using impulse invariance method.
Solution:

Page 5 of 6
Q 5: The system function of the analog filter is given as
𝑠 + 0.1
𝐻𝑎 (𝑠) =
(𝑠 + 0.1)2 + 16
Obtain the system function of the IIR digital filter by using bilinear transformation which is resonant at
𝜋
𝜔𝑟 = 2

Solution: in bilinear transformation we substitute

Put this value of s, and simplify

Page 6 of 6

You might also like