JCB ROBOT SKID STEER LOADERS | 190/1110

OPERATING WEIGHT: 3710kg and 3820kg

OPERATING CAPACITY: 950kg and 1150kg

M J

G F

E
D 1
1
1
0

L
C

O H B
N K A

STATIC DIMENSIONS

190 1110 190 1110

m (ft-in) m (ft-in) m (ft-in) m (ft-in)
A Overall length 3.5 (11-6) 3.5 (11-6) N Shovel width – standard 1.88 (6-2) 1.88 (6-2)
B Wheel base 1.13 (3-8) 1.13 (3-8) Shovel width – optional 2.03 (6-8) 2.03 (6-8)
C Angle of departure 28° 28° O Width over tyres – standard 1.69 (5-7) 1.69 (5-7)
D Overall height 2.01 (6-7) 2.01 (6-7) Width over tyres – optional 1.79 (5.11) 1.79 (5.11)
E Dump height 2.42 (7-11) 2.42 (7-11) Lift capacity at full height SAE kg 950 1150
F Loadover height 2.95 (9-8) 2.95 (9-8) Maximum tipping load SAE kg 1900 2300
G Height to hinge pin, fully raised 3.12 (10-2) 3.12 (10-2) Shovel capacity – standard cu.m 0.50 0.60
H Reach at ground level (toe plate horizontal) 1.00 (3-3) 1.00 (3-3) Turning radius
I Max reach at full height 0.94 (3-1) 0.94 (3-1) Bucket corner radius 2.20 (7-3) 2.20 (7-3)
J Reach at full height – fully dumped 0.64 (2-1) 0.64 (2-1) Quick hitch radius 1.30 (4-3) 1.30 (4-3)
K Dig depth (toe plate horizontal) clearance -9mm (-3/8) -9mm (-3/8) Rear chassis radius 1.66 (5-6) 1.66 (5-6)
L Rollback at ground 30° 30°
A Product
M Dump angle 40° 40° of Hard Work
 JCB ROBOT SKID STEER LOADERS | 190/1110

MACHINE RATING CAPACITIES

Rated operating capacity (SAE): kg 190 and 1110 litres (US gal)
190 950 Hydraulic system (inc. Tank) 38 (10)
1110 1150 Fuel tank 107 (28.2)
Tipping load: Engine coolant 15 (3.9)
190 1900 Engine oil 8.5 (2.25)
1110 2300 Chain cases
Breakout force LH 15 (3.9)
Lift cylinder kgf 2200 RH 8.5 (2.25)
Tilt cylinder kgf 2731

CONTROLS
ENGINE
Three machine control format options. JCB full servo controls, which reduce lever efforts to a minimum, alternatively, either full
servo hand or servo hand and manual foot controls provide patterns well known and accepted by the skid steer buyer and
190 1110
operator. With all options the left hand control lever pivots rearwards , providing unparalleled machine access/egress.
Model JCB TC-63 JCB Dieselmax TC-68
Displacement litres 4.4 4.4
Fuel Diesel Diesel
Cooling Water Water WEIGHT
Bore mm 103 103
Stroke mm 132 132 SAE operating weight.
Gross power @ 2200 rpm Fully operational with quickhitch, standard shovel, full fuel tank, fully glazed cab + 75kg operator
ISO 14396 kW (hp) 63 (84) 68 (92) 190 3710 kg
1110 3820 kg
Gross torque @ 1200 rpm
ISO 14396 Nm (lb/ft) 362 (267) 408 (300.9)
Emission certification EC Stage IIIA/USA EPA Tier 3 EC Stage IIIA/USA EPA Tier 3
Engine oil service intervals 500 hours 500 hours TYRES

190 & 1110 Standard – 12 x 16.5 – 10 pr

Available Options Standard Track
Heavy Duty
TRANSMISSION Lifemaster
33/15.5 x 16.5 Extra Floatation
The full servo controlled hydrostatic transmission giving zero to maximum speed, both forward and reverse at full power. XZM
Independent transmission systems for both the left and right side, controlled through servo controls for precise and easy operation. XZSL
Transmission power management system maintains full engine power availability maximising loader and attachment control. JCB Airboss
Creep Control option, standard on high flow for precise attachment control. Solid Industrial
Travel speeds both forward and reverse: 11 kph (6.9mph) Floatation tyres are fitted for most applications.
Optional 2 speed 18kph (11.2mph)
* For arduous conditions and hostile environments JCB Airboss tyres or Solid tyres are recommended.
* For hard standing heavy duty tyres are recommended

A Product
of Hard Work
 JCB ROBOT SKID STEER LOADERS | 190/1110

HYDRAULICS STANDARD EQUIPMENT

In addition to the main hydrostatic drive pumps there is a dedicated loader and attachments supply pump (auxiliary hydraulics ROPS and FOPS integrated canopy. Full audible and visual warning systems. Isolation bar activated safety system. Loader arm safety
circuit is optional on all base models and standard on high flow model. strut. Centrifugal dry type engine air filter with safety element. Standard shovel. Mechanical quickhitch. Hand throttle. Worklights
(EC only) Servo emergency lower valve. Fuel gauge. Oil immersed fail safe hydraulic park brake.
Pump flow: 80 litres / minute (21 gal/min) @ 2200 rpm engine speed
Main relief pressure 225 bar (3263 psi)

● Low lever efforts give excellent and easy control of transmission loader and attachments.
● Auxiliary hydraulics are actuated via the right hand controller giving progressive control of oil flow for precise attachment
control.
● Hydraulic supply pipes run neatly on top of the loader arm under a protective guard for long life. OPTIONAL EQUIPMENT
● Full flow, spin-on type hydraulic oil filter.
Fully glazed cab with heater / demister. Air conditioning. Road lights. Work lights (not EC). Reverse alarm. Beacon. Foot throttle
● Engine oil throughout for ease of servicing. (not with foot control format). Fire extinquishers. Toolkit. Self levelling lift. Float. Level 2 FOPS guard. Heavy duty rear door guard.
Front screen guard. Auxiliary hydraulics. Bolt on lift points. Battery isolator. Accessory socket. Backhoe mounting brackets.
● The optional hi-flow circuit provides 133 litres/min (35 gal/min) pump flow to the front of the machine for operation of high
Catalylic converter. Spark arrestor. Tooth guard.
capacity attachments such as trenchers and patch planers.

OPERATOR ENVIRONMENT

Full ROPS and Level I FOPS with optional level 2 guard for demolition, full audio and visual warning systems Soundproofing gives
noise levels complying with EC regulations. Safe access through side door – thanks to JCB’s unique single arm design.
● Unequalled all-round visibility.
● Fully adjustable seat.
● Retractable seat belt fitted as standard.
● Drainage cover for easy cleaning of cab.

A Product
of Hard Work
 JCB ROBOT SKID STEER LOADERS | 190/1110

A GLOBAL COMMITMENT TO QUALITY

JCB’s total commitment to its products and customers has helped it grow from a one-man
business into Britain’s largest privately owned manufacturer of backhoe loaders, crawler excavators,
wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts,
industrial fork lifts, mini/midi excavators, skid steer loaders, tractors and compaction equipment.

By making constant and massive investments in the latest production technology, the JCB factories
have become some of the most advanced in the world.

By leading the field in innovative research and design, extensive testing and stringent quality control,
JCB machines have become renowned all over the world for performance, value and reliability.

And with a global sales and service network of more than 650 dealers and agents, we aim to deliver
the best customer support in the industry.

Through setting the standards by which others are judged, JCB has become one of the world’s
most impressive success stories.

JCB Sales Limited, Rocester, Staffordshire ST14 5JP. Tel: 01889 590312. Fax: 01889 590588. Web: http://www.jcb.com
A Product
JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/4872 4/08 Issue 4 of Hard Work