Broaching Machine

Broaching Machine: Types,
Operations, Advantages and

Broaching Methods
Broaching Machine
Contents show
In this article you will learn about broaching machine, Types of broaching machine,
Broaching operation and Advantages.
Broaching is a method of removing metal by pushing or pulling a cutting tool called

a broach which cuts in a fixed path.
In broaching machine, the tool of the machine is pulled or pushed through the

surfaces to be finished. With the help of broaching, finishing is done on flat or
contoured and either internal or external surfaces. Broaching is limited to the removal
of about 6mm of stock or less.
The term broaching may have derived from an ancient Roman word braccus, which
means an object having projecting teeth. The operation itself dates only to the 1850s
when broaching tools when called “drifts” were hammered in blacksmith shops through
the work or pushed with an arbor press.
Types of Broaching Machine

Following are the types of broaching machine
 Horizontal broaching machine

 Vertical broaching machines
 Surface broaching machines
 Continuous broaching machine
Read also: Lathe machine and its types
Broaching machines are the simplest of all machine tools. Broaching machine consist of
a broaching tool, a work holding fixture, a drive mechanism, and a suitable supporting
frame. Although the component parts are few, several variations in design are possible.
There are two principal types of broaching machines: horizontal and vertical.
In addition to these standard types, there are special and continuously operating
machines. Both horizontal and vertical types of machine have one or more rams
depending on production demand. Dual-ram models are arranged so that when one
ram in on the cutting stroke, the other is on the return stroke; the return stroke is
performed quickly to gain time, which is used to unload and load the machine.
Broaching machines usually pull or push the broach through, or past a workpiece that is
held in a fixture. On some machines, however, the workpiece is moved past a broach
that is fixed in its position. Most broaching machines are hydraulically operated to
secure a smooth, uniform cutting action.
Horizontal Broaching Machine
Nearly all horizontal machines are of the pull type. They may be used for either internal
or external broaching, although internal work is the most common. A horizontal
broaching machine is shown in the figure. It consists of a bed or a base a little more
than twice the length of the broaching stroke, a broach pilot and the drive mechanism
for pulling the broach.
Horizontal broaching machines are used primarily for broaching keyways, splines, slots,
round holes, and other internal shapes or contours. They have the disadvantage of
taking more floor space than do the vertical machines. However, long broaches and
heavy workpieces are easily handled.
Vertical Broaching Machine

The vertical types may be obtained in either push or pull type. The push type is the
most popular. A vertical broaching machine is shown in the figure.
Vertical machines are used in multiple operations since they are convenient to pass
work from one machine to another. Of the three models available, pull down, pull up,
and push down, the pull-up type is most popular. Vertical machines require an operator
platform or a pit and are economical of floor space than the horizontal type.
Modern vertical broaches are offered with both hydraulic and electro-mechanical drives.
But hydraulic drives are the most common because they cost less. A vertical hydraulic
broaching machine is illustrated in above figure.
Surface Broaching Machine
Surface broaching machines have their broaching tools attached to a ram or rams
forced in a straight path along guideways past the workpiece. On some surface
broaching machines, the ram travels horizontally, on others ram travels vertically. When
two rams are used, the machines is called a duplex broach.
Continuous Broaching Machine
For mass production of small parts, the highly productive continuous-broaching method
is used on rotary or horizontal continuous-broaching machines.
in the rotary continuous broaching machines, the workpiece is loaded on the table
which rotates continuously. During the operation the broach is stationary.
In the horizontal continuous broaching machines the workpieces travel as they are
carried by an endless chain. The workpieces are loaded into work holding fixtures
mounted on the continuously moving chain. During the operation, the broach is
stationary as before. Such machines are used for broaching small parts.
Read also: Shaper machine and its types
Broaching Methods
Following are the classification of broaching methods:
1. Pull Broaching
2. Push Broaching
3. Surface Broaching
4. Continuous Broaching
Pull Broaching
In the pull broaching the work is held fixed and the broach is pulled through the work.
Usually, broaches are very long and are held in a special head. Pull broaching method is
used for internal broaching but it also used for some surface broaching.
Push Broaching
In the push broaching the work is fixed and the broach is pushed through the work.
Hand and hydraulic arbor presses are commonly used for push broaching. This method
is used for sizing holes and cutting keyways.
Surface Broaching
In surface broaching either the work or the broaching tool moves across the other. This
method has become an important means of surface finishing. Many irregular or intricate
shapes can be broached by surface broaching, but the tools must be specially designed
for each job.
Continuous Broaching
In continuous broaching the work is moved continuously and the broach us held
stationary. The movement of work may be either straight horizontal or circular. The
continuous broaching method is mostly used for broaching a number of similar works at
the same time.
Broaching Machine Operations

Broaching is applied for machining various internal and external surfaces, for a round or
irregular shaped holes from 6 to 100mm in diameter, for external flat and contoured
surfaces. Certain types of surfaces, for example, spline holes, are machined at the
present time only by broaching due to the exceptional difficulties in machining such
surfaces by other methods.
A number of important broaching operations are illustrated below. Some operations are
done in one pass, but some operation arranged for repeated cuts to the design of the
broach.
The teeth of a gear or spline may be broached all together or one or a few at a time. A
comparatively simple broach can be made to cut one or a few tooth spaces. After one
pass, the gear blank is indexed and more of its teeth are cut. Successive passes are
made until all the teeth are finished.
Advantages and Limitations of Broaching

Following are the features and advantages of the broaching.
1. The rate of production is very high.

2. Skill is required from the operator to perform a broaching operation. In most
cases, the operator merely loads and unloads the work-piece.
3. High accuracy and a high class of surface finish are possible. A tolerance of
±0.0075mm and a surface finish about 0.8 microns (1 micron=0.001mm) can be easily
obtained in broaching.
4. Both roughing finishing cuts are completed in one pass of the tool.
5. The broaching process is used for internal and external surface finishing.
6. Any form or shape that can be reproduced on a broaching can be machined.
7. Cutting fluid may be readily applied where it is most effective because a broach
tends to draw the fluid into the cut.
For specific reasons, however, limit the utilisation of the broaching process. They are:
1. High tool cost. A broach normally makes only one job and is expensive to make
and sharpen.
2. Very large work-piece cannot be broached.
3. The surface to be broached cannot have an obstruction.
4. Broaching cannot be used to remove a large amount of stock.
5. Parts to be broached must be capable of being rigidly supported and must be
able to withstand the force that set up during cutting.

Broaching Machine

Uploaded by

Copyright:

Available Formats

Broaching Machine

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Broaching Machine

Uploaded by

Copyright:

Available Formats

What are the main types of broaching machines?

What are the main broaching methods?

Broaching Machine: Types,

Operations, Advantages and

Broaching is a method of removing metal by pushing or pulling a cutting tool called

In broaching machine, the tool of the machine is pulled or pushed through the

Types of Broaching Machine

 Horizontal broaching machine

Read also: Lathe machine and its types

Horizontal Broaching Machine

Vertical Broaching Machine

Continuous Broaching Machine

Read also: Shaper machine and its types

Broaching Machine Operations

Advantages and Limitations of Broaching

1. The rate of production is very high.

You might also like