SCALE 13x

Contemporary
Device Tree
Matt Porter
Konsulko
mporter@konsulko.com
Overview
● History of Device Tree (DT)
● Linux kernel use of DT
● Device Tree Basics
● Device Tree Examples
● Modifying Device Trees
● Dynamic Device Tree Overlays
History of Device Tree (DT)
● Sun Microsystems - Open Boot / Open
Firmware (1988)
○ Used in SPARC systems
○ Uses DT to describe hardware
● IEEE-1275 formalized specification (1994)
○ Documents DT
● Apple adopts Open Firmware on Power Mac
7200 (1995) using DT
● Common Hardware Reference Platform
(CHRP) specifies DT (1995)
● ePAPR specifies DT (2008)
DT in the Linux kernel
● SPARC
○ All systems pass DT so it’s supported for a long time
in the kernel
● PowerPC
○ PowerMacs also drove support of DT in the kernel
○ Major reorg in 2005 merging 32-bit/64-bit required all
platforms to use DT
● x86
○ Yes, really. CE4100 Falconfalls uses DT
DT in the Linux kernel
● ARM
○ Linus’ ultimatum to ARM community (2011)
■ http://lists.infradead.org/pipermail/linux-arm-
kernel/2011-April/048543.html
○ All new platforms must use DT to describe hardware
● MIPS
○ Fall out from Linus’ ultimatum, Ralf Baechle begins
MIPS conversion to DT
■ http://www.linux-mips.org/archives/linux-
mips/2011-06/msg00059.html
● Microblaze
○ Using DT in 2008, driven by flexible FPGA I/O
Defining Device Tree
● ePAPR defines DT
○ https://www.power.org/documentation/epapr-
version-1-1/
■ a concept called a device tree to describe
system hardware.
■ A device tree is a tree data structure with
nodes that decribe the physical devices in a
system.
■ [a] device tree describes device information
in the system that cannot be dynamically
detected by a client.
Device Tree Basics
● Nodes
○ Groupings of properties and child nodes
● Properties
○ Key-Value Pairs
■ Text strings “my string”
■ Cells (32-bit) <0xdeadbeef 11 0xf00d>
■ Binary data [0x01 0x02 0x03 0x04]
■ mixed data, concatenate with a comma
● “my string”, <0xdeadbeef>, [0x04], “your string”
● Phandles
○ Reference to another node
Device Tree Source Format
/ { Node name and unit address String, list, and binary
node1@0 { property values
a-string-property = "A string";
a-string-list-property = "first string", "second string";
a-byte-data-property = [0x01 0x23 0x34 0x56];
child-node1@0 {
first-child-property;
second-child-property = <1>; Phandle
third-child-property = <&node2>;
a-string-property = "Hello, world";
};
child-node2@1 {
};
Label
};
node2: node2@1 {
an-empty-property;
a-cell-property = <1 2 3 4>; /* each number (cell) is a uint32 */
child-node1 {
};
};
};
Device Tree Node Example
Unit address is the memory mapped I/O address of this UART
uart0: serial@44e09000 {
An identifier for this hardware which allows the operating system to
match a compatible driver to the peripheral.
compatible = "ti,omap3-uart";
Vendor specific properties are prefixed with a vendor ID
ti,hwmods = "uart1";
Input clock frequency for this UART
clock-frequency = <48000000>;
Base address of length of the memory mapped I/O
reg = <0x44e09000 0x2000>;
Interrupt number
interrupts = <72>;
Device is not enabled
status = "disabled";
DMA engine properties, phandle to DMA deivice node and channels used
dmas = <&edma 26>, <&edma 27>;
dma-names = "tx", "rx";
};

arch/arm/boot/dts/am33xx.dtsi
Device Tree Driver Example

Compatible strings this driver matches

#if defined(CONFIG_OF)
static const struct of_device_id omap_serial_of_match[] = {
{ .compatible = "ti,omap2-uart" },
{ .compatible = "ti,omap3-uart" },
{ .compatible = "ti,omap4-uart" },
{},
};
MODULE_DEVICE_TABLE(of, omap_serial_of_match);
#endif Probe will be run when a matching
compatible string is found
static struct platform_driver serial_omap_driver = {
.probe = serial_omap_probe,
.remove = serial_omap_remove,
.driver = {
.name = DRIVER_NAME,
.pm = &serial_omap_dev_pm_ops,
.of_match_table = of_match_ptr(omap_serial_of_match),
},
};
drivers/tty/serial/omap-serial.c
Device Tree Platform Example
&am33xx_pinmux {
... Child node contains platform specific pin mux settings for UART0
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x170 (PIN_INPUT_PULLUP | MUX_MODE0)
0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)
>;
};
…
};

...
Pinctrl properties contain pin mux settings that are
&uart0 { referenced here via phandle
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
Marking this device enabled instantiates the device in the kernel

status = "okay";
};
arch/arm/boot/dts/am335x-bone-common.dtsi
Device Tree Bindings
● ePAPR defines as
○ ...requirements, known as bindings, for how
specific types and classes of devices are
represented in the device tree.
● Maintained in Linux kernel
○ Documentation/device-tree/bindings/*
○ Follow standards and conventions established in
IEEE1275 and ePAPR
● Each type and class of device has a DT
binding describing all of the valid properties
and their behavior
Device Tree Binding Example
OMAP UART controller

Required properties:
- compatible : should be "ti,omap2-uart" for OMAP2 controllers
- compatible : should be "ti,omap3-uart" for OMAP3 controllers
- compatible : should be "ti,omap4-uart" for OMAP4 controllers
- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)

Optional properties:
- clock-frequency : frequency of the clock input to the UART

Whoa, wait, this is a terrible example. This

binding doesn’t show the reg, interrupt, or
dmas properties that are clearly used in the
working dtsi source file’s UART node.

Documentation/devicetree/bindings/serial/omap_serial.txt
FIXED Device Tree Binding Example
OMAP UART controller

Required properties:
- compatible : should be "ti,omap2-uart" for OMAP2 controllers
- compatible : should be "ti,omap3-uart" for OMAP3 controllers
- compatible : should be "ti,omap4-uart" for OMAP4 controllers
- reg : address and length of the register space
- interrupts: Should contain the uart interrupt number
- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)

Optional properties:
- clock-frequency : frequency of the clock input to the UART
- dmas: DMA specifier, consisting of a phandle to the DMA controller
node and a DMA channel number.
- dma-names: “rx” for RX channel, “tx” for TX channel.

Example:
uart0: serial@44e09000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
…
};
Managing Device Tree Source (DTS)
● DTS files found in arch/foo/boot/dts/ on
ARM, MIPS, PowerPC, and MicroBlaze
● A DTS file is compiled into a Device Tree
Blob (DTB)
○ The resulting DTB is passed to the kernel at boot
○ All devices are created using the contents of the
DTB.
● DTS files may include other files
BeagleBone White/Black DTS/DTSI

am335x-bone-black.dts am335x-bone.dts am335x-evm.dts

am335x-bone-common.dtsi

am33xx.dtsi
Compiling DTBs
● The Device Tree Compiler (dtc) is used to
compile DTS -> DTB
○ Found in scripts/dtc
● Invoking dtc from the kernel tree
○ make dtbs
○ will generate DTBs for each DTS in
arch/foo/boot/dts/*
○ Runs C preprocessor on source files
● Invoking dtc directly
○ dtc -I dts -O dtb -o myboard.dtb myboard.dts
Adding an I2C device to a board
Add this i2c1 pins node which defines pinmux settings for BeagleBlack P9-
18 and P9-17 to be muxed as I2C1_SDA and I2C1_SCL, respectively. The
&am335x_pinmux {
property values are gathered from a combination of the board manual, SoC
... datasheet, and the pinctrl single binding.
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x158 (PIN_INPUT_PULLUP | MUX_MODE2)
0x15c (PIN_INPUT_PULLUP | MUX_MODE2)
>;
};
...
}; The i2c1 device node included from the am33xx.dtsi is overlayed with board
specific properties. The pinctrl properties reference the above pinmux
configuration for the I2C pins and the clock frequency is set according to the
…
device capabilities on the I2C bus. Finally, the i2c controller is enabled. Note
that the i2c1 device node defaults to disabled in am33xx.dtsi.
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
status = "okay";
The at24@50 child node instantiates a 24c256 I2C serial eeprom on the
at24@50 { parent I2C bus at address 0x50.
compatible = "at,24c256";
pagesize = <64>;
reg = <0x50>;
};
};

Modifying arch/arm/boot/dts/am335x-boneblack.dts
Dynamic Device Trees

● Power architecture has had

CONFIG_OF_DYNAMIC
○ Destructive changes to the live device tree
● Capebus introduced in 2012, a kernel
framework to dynamically modify the DT
based on pluggable hardware
○ Driven by Beaglebone’s standardized expansion
capes (Capebus shipped in the Beaglebone 3.8
kernel) .
● Capebus discussions made way upstream
for the staged introduction of dynamic DT
overlays.
Dynamic DT Overlays
● Part of the kernel since 3.19
● Introduces the concept of a DT fragment
○ A DT fragment is a DTB which contains symbols that
can only be resolved at runtime against the live tree.
● Allows a user to insert a DT fragment into
the live tree at runtime and activate it
○ The inserted fragment becomes part of the tree in
the same manner as if it were compiled into the DTB
and passed at boot time.
● A configfs interface is used to specify DT
fragments to be applied to the live tree
DT Fragment Format
● Use overlay enabled dtc from https://github.com/pantoniou/dtc
● Borrowing Pantelis Antoniou’s example:
/* qux.dts */
/dts-v1/;

Notifies dtc that this is a DT fragment.

/plugin/;

/ {

The dtc compiler will assign a phandle value of 0x00000001 to the baz node.

BAZ: baz { };

The dtc compiler will resolve &BAZ accordingly for a value of <0x00000001>.

qux = <&BAZ>;
The dtc compiler will mark property quux as requiring a fixup at runtime to resolve
&FOO.
quux = <&FOO>;
};
DT Fragment Format Analysis
● Compile it
$ dtc -O dtb -o qux.dtbo -b 0 -@ qux.dts

● Dump it
$ fdtdump qux.dtbo
/ {
qux = <0x00000001>;
quux = <0xdeadbeef>;
baz {
linux,phandle = <0x00000001>;
phandle = <0x00000001>;
};
__symbols__ { BAZ = "/baz"; };
__fixups__ { FOO = "/:quux:0"; };
__local_fixups__ { qux = <0>; };
};
Add I2C device: DT Overlay Version
/dts-v1/;
/plugin/;

/ {
fragment@0 {
target = <&am3353x_pinmux>;
__overlay__ {
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x158 0x72
0x15c 0x72
>;
};
};
};

fragment@1 {
target = <&i2c1>;
__overlay__ {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
status = "okay";

at24@50 {
compatible = "at,24c256";
pagesize = <64>;
reg = <0x50>;
};
};
at24-i2c1.dts
};
};
Add I2C device: Build and Load
Overlay

$ dtc -O dtb -o at24-i2c1.dtbo -b 0 -@ at24-i2c1.dts

$ mkdir /config/device-tree/overlays/a24-i2c1

Loads and activates the DT fragment, enabling

the I2C1 controller and instantiating the 24C256
I2C EEPROM
$ cp at24-i2c1.dtbo /config/device-tree/overlays/at24-i2c1/dtbo

Deactivates and removes the DT fragment,

disabling the I2C1 controller and the 24C256 I2C
EEPROM
$ rmdir /config/device-tree/overlays/at24-i2c1
Q&A
References
● The Kernel Source™
● https://www.power.org/documentation/epapr-
version-1-1/
● http://devicetree.org
● http://events.linuxfoundation.
org/sites/events/files/slides/petazzoni-
device-tree-dummies.pdf
● http://events.linuxfoundation.
org/sites/events/files/slides/dynamic-dt-
elce14.pdf