10 Plus Series Emergency Materials

Shut-Off Valves
Top: C
 ast iron
OPW raised the protection standard in
emergency valves when it introduced Body: Cast iron
the first double-poppet valve back in
1989. This industry-changing OPW
innovation helped to significantly reduce
the risk of fire, explosion, personal injury,
10 PLUS
property damage and environmental
contamination at sites around the
world. Major oil companies and jobbers Features
agreed that providing added protection
u T
 he ONLY emergency shut-off valve
for their customers, investments and u S
 uperior
in the world designed to protect shear groove design and
the environment were the three most
your customers, investments, and the engineering results in reliable valve
convincing reasons for switching to the
environment against the potential shut-off in the event of a pull-over
innovative new valves.
hazards of undetected shear groove or dislodged dispenser. The 10 Plus
leaks caused by low-impact incidents. utilizes the same time-tested
Dimensions field-proven design of the OPW 10
u T
 he patent-pending SmartGuard™
in. cm Series Emergency Shut-off Valve –
design contains shear groove leaks,
A 79/16 4
preventing fuel from leaking into the most specified emergency
B 225/32 4 sumps to help reduce the risk of shut-off valve in the world.
fire, explosion, personal injury, u F
 usible link releases to automatically
C 221/32 4
property damage, environmental close the valve to reduce fire hazard.
D 211/16 4
contamination, product loss and u R
 igorously tested to meet OPW’s
E 29/16 4 costly clean-up. rigid quality standards.
F 421/32 4 u E
 85 model has orange arm for
visual indicator
Ordering Specifications
Body
Body Size Connection Poppet Mounting
Model # Weight Application
Threads Configuration System
in. cm lb. kg
10P-0150 1/
1 2
4 6.7 3.05 NPT Single Pressure Combination

10P-0152 1/
1 2
4 6.8 3.10 NPT Double Pressure Combination
F
*E85 10P-0152E85 11/2 4 6.8 3.10 NPT Double Pressure Combination

*E85 Applications

10 Plus Replacement Parts

E Part # Description
10 Plus Single Poppet
10RPLUS-0150
Replacement Top
10 Plus Double Poppet
10RPLUS-0152
Replacement Top
A 202950 11/2" Tetra Seal

200143 Safety Hub/Fusible Link

C H11361M 2" Tetra Seal

B
D

Listings and 10 Plus Series Instruction Sheet Order

Certifications Number: 201614

128 9393 Princeton-Glendale Road Hamilton, Ohio USA 45011 Phone: (800) 422-2525 Fax: (800) 421-3297
 BELOW GROUND PRODUCTS www.opwglobal.com

Materials 10 Series Emergency

Patented Thermal
Shut-Off Valves
Top: Cast iron Low Profile
Relief Valve
Body: Cast iron OPW 10 Series Emergency Shut-off
Air Test Port
Disc: M-19 Main Valves are installed on fuel supply
Poppet Secondary lines beneath dispensers at grade level
Carrier: Zinc-plated steel Seat Poppet to minimize hazards associated with
Stem: Copper-nickel-chrome-plated brass Fusible collision or fire at the dispenser. If the
Poppet Spring: Stainless steel Link
dispenser is pulled over or dislodged by
Seal: M-19 O-Ring collision, the top of the valve breaks off
Nickel-Plated,
Packing nut: Brass, Teflon®-coated Teflon-Coated at the integral shear groove, activating
Inlet and outlet thread: 1-1/2" (4 cm) NPT Main Stem poppets and shutting off the flow of fuel.
(British threads available) Single-poppet models shut off supply
*With black Duragard® E-Coating Combination Main Poppet
Body flow, while double-poppet models shut
off supply as well as prevent release
Features of fuel from the dispenser’s internal
u High Flow Capacity – the primary u Integral Test Port – a 3/8" (9.5 mm) piping. The base of the emergency valve
poppet is held out of the flow stream test port allows the piping system to be
while the secondary poppet is held
is securely anchored to the concrete
air-tested without breaking any piping
normally open to minimize head loss connections. dispenser island through a stabilizer bar
across the valve and to protect the poppet u P
 atented Thermal Relief Valve – system within the dispenser sump or pan
seals from damage and erosion. True relieves excessive pressure over 25 psi to ensure proper shearing action. The
1-1/2" (4 cm) and 2" (5 cm) body sizes caused by thermal expansion of fuel in the valve base is secured to the stabilizer
ensure maximum flow. dispenser piping system in the event of bar using a three-point boss mount
u F
 ire Protection – a fusible link trips fire (double-poppet models only). system or a U-Bolt Kit (not included)
the valve closed at 165º F to shut off fuel u Low-Profile Tops – female and union-
supply to the dispenser. 10UBK-015 (1-1/2") and 10URK-
top double-poppet valves have a low-
0200 (2 sold separately). Valve inlet
 ain Poppet Seat Integral to the
u M profile top to allow upgrading from OPW
Top Assembly – having the main poppet single-poppet valves without changing (bottom) connections are female pipe
seat as an integral part of the valve top existing piping. threads and outlet (top) connections
ensures a new, clean seating surface is u M
 ultiple Mounting Options – valves are available with female threads, male
installed each time the top is replaced. are boss-mounted to stabilizer bars in threads or a union fitting. Other options
This design also ensures that the integrity sumps and pans or mounted to bars
of the seal between the valve top and
include suction system models with a
embedded in the island with optional normally closed secondary poppet which
bottom is verified during line testing and U-Bolt kits 10UBK-015 (not included).
allows full inspection of the main poppet Versatile Combination Body (boss mount/
maintains prime, and models
when the top is removed. U-Bolt mount) models are available to with external threads on the inlet
u D
 uragard®-Coat Finish – provides accommodate most mounting applications body which connect to secondary
superior corrosion resistance. with one valve style. containment systems.
u R
 eliable Shut-off – a stainless steel u U
 nderwriters Laboratories –
main spring, a teflon-coated brass packing listed for use with gasoline and 85% and
nut and a copper/nickel/ chrome-plated 100% methanol. All OPW 10 Emergency
brass stem are designed to prevent tar Shut-Off Valves meet requirements of UL
build-up and corrosion from interfering STANDARD 842.
with poppet operation after long periods u C
 ompatible with 85% ethanol (E85)
of normal service without activation.

PA15 Offset Adaptor Ordering Specifications

The OPW PA15 Offset Adaptor Thread Size Offset Height Width Body Weight
Part #
is designed for adjusting in. mm in. mm in. mm in. mm lb. kg

misalignment of pipe in PA15-10 1 1/ 2 38.1 1 25 2 1/ 4 57.2 3 5/ 8 92.1 2 .9

dispenser sumps and suction PA15-15 1 1/ 2 38.1 1 1/ 2 38.1 2 1/ 4 57.2 4 1/ 8 104.8 2 .9
stubs. The PA15 has a low Materials PA15-20 1/1 2
38.1 2 51 2/1 4
57.2 4/5 8
117.5 2 .9
profile feature, and is designed
Ductile Iron
for maximum flow. Black Duragard
E-Coating

129
 OPW 10 Series Emergency Shut-Off Valves

Ordering Specifications
Female Threaded Top (Outlet) Connection Valves
Body Size
Model # Connection Threads Poppet Configuration Application Replacement Top
in. cm
10BF-5725 1 1/ 2 4 NPT Single Pressure 10RFT-5750

10BFP-5726 1/1 2
4 NPT Double Pressure 10FTP-5701

10RF-2001 2 5 NPT Single Pressure 10RFT-5742

10RFP-2002 2 5 NPT Double Pressure 10RFTP-5752

Male Threaded-Top (Outlet) Connection Valves

Body Size
Model # Connection Threads Poppet Configuration Application Replacement Top
in. kg

10BM-5825 1 1/ 2 4 NPT Single Pressure 10RMT-5850

10BHMP-5830 1 1/ 2 4 NPT Double Pressure 10RMTP-5851

10SBHMP-5830 1 1/ 2 4 NPT Double Suction 10SHMTP-5811

10RM-2003 2 5 NPT Single Pressure 10RMT-5842

10RMP-2004 2 5 NPT Double Pressure 10RMTP-5852

Union-Top (Outlet) Connection Valves

Body Size
Model # Connection Threads Poppet Configuration Application Replacement Top
in. kg
10BU-5925 1 1/ 2 4 NPT Single Pressure 10RUTC-5975

10BUP-5926 1 1/ 2 4 NPT Double Pressure 10UTCP-5901

10SBUP-5926 1/1 2
4 NPT Double Suction 10SUTCP-5911

10RU-2005 2 5 NPT Single Pressure 10RUTC-5962

10RUP-2006 2 5 NPT Double Pressure 10RUTCP-5972

NOTE: All BSPP Thread Shear Valves must be ordered through OPW's Europe or Asia office.

IMPORTANT NOTICE:
When mounting the OPW 10 Series Emergency Shut-off Valves, the anchoring system employed must withstand a force greater than 650 ft. pounds per valve.
NFPA Code 30A, Automotive and Marine Service Station Code, requires that the automatic closing feature of emergency shut-off valves be checked at least
once per year by manually tripping the hold-open linkage. OPW recommends the use of Flexworks Stabilizer Bar Support System for proper mounting
of 10 Series Valves.

NOTICE:
As per NFPA 30A, electrical supply to the submersible pump must always be disconnected before servicing meters, dispensers or emergency shut-off valves.

130 9393 Princeton-Glendale Road Hamilton, Ohio USA 45011 Phone: (800) 422-2525 Fax: (800) 421-3297
 BELOW GROUND PRODUCTS www.opwglobal.com

Replacement Valve Tops

Body Size Connection Poppet
Model # Application Top Connection Profile
in. cm Threads Configuration

10RFT-5750 1 1/ 2 4 NPT Single Pressure Female

10RFTP-5751 1/1 2
4 NPT Double Pressure Female

10FTP-5701 1 1/ 2 4 NPT Double Pressure Female Low Profile

10RMT-5850 1 1/ 2 4 NPT Single Pressure Male

10RMTP-5851 1/1 2
4 NPT Double Pressure Male

10SHMTP-5811 1 1/ 2 4 NPT Double Suction Male

10RUTC-5975 1 1/ 2 4 NPT Single Pressure Complete Union

10UTCP-5901 1/1 2
4 NPT Double Pressure Complete Union Low Profile

10RFT-5742 2 4 NPT Single Pressure Female

10RFTP-5752 2 5 NPT Double Pressure Female

10RMT-5842 2 5 NPT Single Pressure Male

10RMTP-5852 2 5 NPT Double Pressure Male

10RUTC-5962 2 5 NPT Single Pressure Complete Union

10RUTCP-5972 2 5 NPT Double Pressure Complete Union

11/2" Dimensions
10BFP 10BHMP 10BUP
10BF 10BM 10BU
10SBFP 10SBHMP 10SBUP
D
in. mm in. mm in. mm in. mm in. mm in. mm
A 621/64 161 621/64 161 613/16 173 711/16 195 7 1/ 4 184 7 1/ 4 184 A

B 2 3/ 4 70 2 3/ 4 70 2 3/ 4 70 2 3/ 4 70 2 3/ 4 70 2 3/ 4 70

C 211/16 69 211/16 69 211/16 69 211/16 69 211/16 69 211/16 69

2"
10R 2"

D 1 3/ 4 44 1 3/ 4 44 2 1/ 4 57 3 1/ 8 79 211/16 69 211/16 69
B C
10R

2" Dimensions
10RF 10RM 10RU 10RFP 10RMP 10RUP
10RFS 10RMS 10RUS 10RFSP 10RMSP 10RUSP
Other Replacement Parts
Part # Description
in. mm in. mm in. mm in. mm in. mm in. mm
202950 11/2" Tetra Seal
A 8 3/ 8 213 927/32 250 913/32 239 8 3/ 8 213 927/32 250 913/32 239
H11361M 2" Tetra Seal
B 37/64 79 37/64 79 37/64 79 37/64 79 37/64 79 37/64 79
H07659M Link Spring
C 3 1/ 4 83 3 1/ 4 83 3 1/ 4 83 3 1/ 4 83 3 1/ 4 83 3 1/ 4 83
H07643RB Link Retaining Screw
D 31/16 78 49/16 116 3 7/ 8 98 31/16 78 49/16 116 3 7/ 8 98
H04788M Hold-Open Link (Brass)

H05361 Safety Hub S/A-Fusible Link

10UBK-015 U-Bolt Kit for 11/2"

10URK-020 U-Bolt Kit for 2"

131