CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC.

Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

PACiS V5.1

RELEASE NOTE

V5.1.9 PACiS Pack 2

DISTRIBUTION
Confidentiality Category Control Category
Restricted Normal Controlled Not Controlled
Error: Error:
Reference source not Reference source not
foundError: Reference foundError: Reference
source not foundError: source not foundError:
Reference source not Reference source not
foundError: Reference foundError: Reference
source not foundError: source not foundError:
Reference source not Reference source not
foundError: Reference foundError: Reference
source not found source not found
Issue Error:
Identification Identification
Reference source Energy Automation
number letters
not found
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

not found
2059660Error:
Reference source
RN
I3
Avenue de Figuières – BP75
34975 Lattes Cedex - France
SCHNEIDER ELECTRIC Protection & Contrôle
 Energy Automation

APPROVAL SIGNATURES

NAME POSITION DATE SIGNATURE

C. BRIET PROJECT DESIGN LEADER

CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

G. JUVANON SYSTEM INTEGRATION

LEADER

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 3/39
 Energy Automation

RECORD OF REVISION

ISSUE DATE AUTHOR COMMENTS

A 22/10/13 G. JUVANON Delivery of C264 B9.03, CAT & CGAT A2.02 GTW
9.6.14, HELPS 3.7.6.4, SBUS 9.9.0.0, SCE 5.10.01, SMT
K.06.01, SUI 1.2.0
Delivery of CR 1538: C264-GTW, DNP3 protocol, Use of
off-line flag and remember of last known point
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

Delivery of CR 1563: C264- IEC104 Buffer Management

Delivery of CR 1564: C264 IEC101 Master Time Sync
Behaviour
Delivery of CR 1631: Valid state 00 / 11 on SCADA
IEC60870-5-101
Delivery of CR 1911: Gateway V5 on Modbus Slave no.
of Analog Information Limitation to be increased up to
2500
Delivery of CR 1935: DNP3/IP Master on C264
Delivery of CR 1947: OTM Turbines, C264 LHMI
Synchroscope & MV
Delivery of CR 1979: SCE: Associate .icd file to an
IEC61850 IED by Script (Groovy)
Delivery of CR 1988: BP FPSO - Modbus function 16
implementation in the GTW V5
Delivery of CR 2020: Wheatstone – function 16
(MODBUS) on C264 to send Setpoints 32bits
Delivery of PTR11-01 - CR5 Incremental 61850 auto-
addressing
Delivery of PTR11-04.2 - DFR 26009: GTW: IsaGraf on
Windows
Delivery of PTR11-05: GTW: DNP3/IP Master
B 22/11/13 G. JUVANON Delivery of C264 B9.07, GTW 9.6.18, HELPS 3.7.8.4,
SBUS 9.11.0.0, SCE 5.11.01, SUI 1.2.0.S
Delivery of CR 2031: System synchronisation Pacis GTW
as system master clock (DNP3, T101 and T104)
C 06/01/14 G. JUVANON Delivery of C264 B9.10, GTW 9.6.19, SBUS 9.13.0.0,
SCE 5.12.01, SUI 1.2.0.T
Delivery of CR 2081: Synchronization with only two
busbar voltages connect (VBUS1 and VBUS2)
D 31/03/14 G. JUVANON Delivery of C264 B9.13, CAT & CGAT A2.03, GTW
9.7.2, HELPS 3.8.0.5, SCE 5.14.02, SUI 1.2.3
Delivery of PTR2013-003-GTW T103 Master - Phase 1
Delivery of PTR2014-001-01 T104 AFS -multiclients
T104 slave GTW-PC
D1 14/04/14 G. JUVANON Delivery of C264 B9.15, CAT & CGAT A2.04, GTW
9.311.703.101, SBUS 9.13.3.0, SCE 5.14.04, SUI 1.2.3.2

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 4/39
 Energy Automation

D4 17/04/15 G. JUVANON Delivery of C264 B9.23, GTW 9.311.703.400, HELPS

3.8.0.18, SCE 5.14.12, SBUS 9.24.0.0, SMT K.06.02, SUI
1.2.4
Delivery of DFR24809: GOOSES - RTX - RedSt
management after GTW active disconnection
Delivery of CR 2362: SAPN - Development of DNP3
UDP
D6 06/10/15 G. JUVANON Delivery of C264 B9.28, GTW 9.311.705.100, SBUS
9.27.0.0, SCE 5.14.16
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

Delivery of CR 2164: MODBUS - Integration in GTW V5

Server of Modbus Function 3 & 4 for SPS
Delivery of CR 2197: Get the DATE and the TIME from
C264 to IsaGraf
Delivery of CR 2359 : GTW : Jammed and Undefined
states for DNP3
Delivery of CR 2393: GTW DNP3.0 Implement 32 bits
Floating analog + Time & Date
D7 19/10/15 G. JUVANON Delivery of C264 B9.30, CAT , CGAT & GAT A2.07,
SCE 5.14.17
D8 19/11/15 G. JUVANON Delivery of EcoSUI 2.1.15281.0, GTW 9.311.707.200,
SBUS 9.28.0.0
Delivery of CR 2403: ECO SUI trends date/time picker
Delivery of CR 2447: ECO SUI Alarmviewer Button Hide
Delivery of CR 2498: GTW: Modbus TCP Scada control
(fct 5) 2 SPC (OPEN/CLOSE) to be mapped on DPC
(SCE)
D9 04/02/16 G. JUVANON Delivery of C64 B9.33, EcoSUI 2.1.16027.0, HELPS
3.8.1.0, SBUS 9.31.0.0, SCE 5.14.19
Delivery of PTR2014-002: SMART BLOCKS
implementation in C264
F1 15/03/16 JF. KARSENTY Delivery of C264 B9.35, EcoSUI 2.1.16053, SBUS
9.32.0.0, SCE 5.14.20.A
Delivery of CR 2072_iLSU: C264 as LSU Goose/PSL
optimisation for FLS
Delivery of CR 2529: [C264]: DNP3 TCP/IP Buffering
G 15/04/16 G. JUVANON Delivery of GTW 9.311.708.400, EcoSUI 2.1.16099, SCE
5.14.20.B
Delivery of CR 2495: OPC Client required in V5 Gateway
H 21/04/16 G. JUVANON Delivery of C264 B9.36, SCE 5.14.21
Delivery of CR 2438: Substation local/remote at bay level
I 17/05/16 G. JUVANON Delivery of GTW 9.311.709.100, EcoSUI 2.1.16125
Delivery of CR 2494: Multiple control request in single
DNP3.0 IP frame (IPPM)
I1 22/06/16 G. JUVANON Update § 7.1.1
I2 03/10/16 G. JUVANON Delivery C264 B9.38, HELPS 3.8.1.2, SBUS 9.34.0.0,
SCE 5.14.22, xAT A2.08

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 5/39
 Energy Automation

I3 09/11/16 G. JUVANON Delivery of SCE 5.14.23.A

Delivery of OPC_AVE_Patch_1.1.5 for EDM - AVE
PSCN Projects only
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 6/39
 Energy Automation

TABLE OF CONTENTS

1. SYSTEM IDENTIFICATION...............................................................................................................................8

2. REFERENCE DOCUMENTS...............................................................................................................................8

3. ABBREVIATIONS.................................................................................................................................................9
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

4. LIST OF ITEMS...................................................................................................................................................10
4.1. PACIS C264............................................................................................................................................................11
4.2. PACIS CAT & CGAT............................................................................................................................................11
4.3. PACiS GATEWAY................................................................................................................................................12
4.4. HELPS.....................................................................................................................................................................14
4.5. PACiS SBUS Agency.............................................................................................................................................14
4.6. PACiS SCE.............................................................................................................................................................14
4.7. PACiS SMT............................................................................................................................................................15
5. FEATURES...........................................................................................................................................................16

6. ENHANCEMENTS...............................................................................................................................................19

7. ANOMALIES........................................................................................................................................................20
7.1. Anomalies corrected................................................................................................................................................20
7.1.1. External Anomalies corrected.................................................................................................................................20
7.1.2. Merge of External Anomalies corrected.................................................................................................................20
7.1.3. Internal Anomalies corrected..................................................................................................................................21
7.1.4. Merge of Internal Anomalies corrected..................................................................................................................21
7.2. Known limitations...................................................................................................................................................22
7.2.1. General limitations..................................................................................................................................................22
7.2.1.1. GTW-PC.................................................................................................................................................................22
7.2.2. Anomalies created (I&V and Validation System)..................................................................................................24
8. IDENTIFIED RISKS AND RECOMMENDATIONS......................................................................................25
8.1. HELPS.....................................................................................................................................................................25
8.2. GATEWAY.............................................................................................................................................................26
8.2.1. Logging User...........................................................................................................................................................26
8.2.2. Redundant GTW configuration: recommended good practices..............................................................................26
8.2.3. ADVANTEC UNO 4683 network connection drivers...........................................................................................27
8.2.4. Debug view notice...................................................................................................................................................27
8.2.5. Windows Registry Database entries for GTW Master Modbus protocol...............................................................27
8.2.6. Isagraf on Windows................................................................................................................................................28
8.2.7. SNTP Synchronisation (CR2031)...........................................................................................................................29
8.2.8. MODBUS Slave (CR 2498)....................................................................................................................................30
9. COMPATIBLE SUPPLIES.................................................................................................................................31
9.1. External supplies.....................................................................................................................................................31
9.2. HW_SW_C264.......................................................................................................................................................31
10. INSTALLATION / USE.......................................................................................................................................32
10.1. Windows 7: Synchronisation GTW........................................................................................................................32
10.2. Windows XP: Gateway...........................................................................................................................................32
11. Database Compatibility...........................................................................................................................................33

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 7/39
 Energy Automation

1. System identification

Name: PACiS V5.1

New release: V5.1.9 PP2 Availability date (Delivery to CS&Q / Customer Technical Support - ACS): 14/11/16
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

Previous release: V5.1.9 PP1

2. Reference documents
Title Reference Issue Comments/S Language
tatus
PACiS – Product Specifications PS - 2059660 P A English
PACiS – SBUS System Internal Interfaces V6 SBUS_SII_6 - 2059660 Z A English
PACiS Release Note RN - 2059660 I1 A English
PACiS – SYS Document Validation Plan DVP - 2059660 A A English
PACiS – SYS Document Validation Plan AUTO DVP_AUTO - 2059660 C A English
C264 - Hardware Validation Plan HVP - 2070643 D2 A English
Contraintes d'intégration ISAGRAF DSL - 2059660 D A French
PACiS Technical Guides - D10 A English
PACiS Operational Guides - D10 A English

Status:
 NA : Not Approved
 A : Approved
 A/R : Author/reader cycle in progress
 W : Writing (or updating) in progress

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 8/39
 Energy Automation

3. Abbreviations

The table below contains acronyms specific to the system.

CAT : Computer Administration Tool

CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

CGAT : Computer & Gateway Administration Tool

CRA : Change Request Analysis
DPS : Double Point Status
DSP : Digital Signal Processor, which supports module protection functionality
EPATR : Ensemble de Protection Ampèremétrique de Terre Résistante (French Legacy very
resistive earth current module
ES : Equipment Simulator
FBD : Functional Block Editor
FR : Fault Report
FSL : Fast Load Shedding
GAT : Gateway Administration Tool
GTW : Gateway
HELPS : Hostable Emulator for Load and Protocol Simulation
HMI : Human Machine Interface
IED : Intelligent Electronic Device
LSP : Load Shedding Preselection
MPS : Multiple Point Status
MV : Measurement Value
N/A : Not Applicable
NUC : Norwegian User Conventions
OWS : Operator WorkStation
PLC : Programmable Logic Control
PTR : Product Task Request
RCP : Remote Control Point
SCADA : Supervisory Control And Data Acquisition
SCE : System Configuration Editor
SCP : Substation Control Point
SMT : System Management Tool
SNTP : Simple Network Time Protocol
SPS : Single Point Status
TPI : Tap Position Indication (for Transformers)
WTS : Windows Terminal Services

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 9/39
 Energy Automation

4. List of items
PACiS C264 CAT / EcoSUI GTW HELPS SBUS SCE SMT
CGAT Agency
V5.1.4 B9.13 A2.03 9.7.2 3.8.0.5 9.13.0.0 5.14.02 K.06.01
V5.1.4.1 B9.15 A2.04 9.311.703.101 3.8.0.5 9.13.3.0 5.14.04 K.06.01
V5.1.4.4 B9.23 A2.04 9.311.703.400 3.8.0.18 9.24.0.0 5.14.12 K.06.02
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

V5.1.4.6 B9.28 A2.04 9.311.705.100 3.8.0.18 9.27.0.0 5.14.16 K.06.02

V5.1.4.7 B9.30 A2.07 9.311.705.100 3.8.0.18 9.27.0.0 5.14.17 K.06.02
V5.1.4.8 B9.30 A2.07 2.1.15281 9.311.707.200 3.8.0.18 9.28.0.0 5.14.17 K.06.02
V5.1.4.9 B9.33 A2.07 2.1.16027 9.311.707.200 3.8.1.0 9.31.0.0 5.14.19 K.06.02
V5.1.8 B9.36 A2.07 2.1.16099 9.311.708.400 3.8.1.0 9.32.0.0 5.14.21 K.06.02
V5.1.9 B9.36 A2.07 2.1.16125 9.311.709.100 3.8.1.0 9.32.0.0 5.14.21 K.06.02
V5.1.9 PP1 B9.38 A2.08 2.1.16265 9.311.709.100 3.8.1.2 9.34.0.0 5.14.22 K.06.02
V5.1.9 PP2 B9.38 A2.08 2.1.16295 9.311.709.1001 3.8.1.2 9.34.0.0 5.14.23.A2 K.06.02

1
OPC AVE Patch 1.1.5 for EDM – AVE PSCN Projects (FR 37843/36654)

2
SCE 5.14.23.A#build1

The last line describes the current version.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 10/39
 Energy Automation

4.1. PACIS C264

Modified
(Files / Component / sub-systems) Software Version (X = Yes) Comments

Bootrom CPU3 B1.08

Workbench B1.08
VxWorks 6.2
ISAGRAF Runtime V5.12
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

Settings structure S5.3x

Micom S1 M5.3E
SBUS Agency SB9.34.0.0
PERMA B2.26
C264 B9.38

4.2. PACIS CAT & CGAT

Modified
(Files / Component / sub-systems) Software Version (X = Yes) Comments

PERMA B2.26
CAT A2.08 See Note
CGAT A2.08 See Note

Note: CAT & CGAT software need Windows Installer 3.1, WinPcap 4.1.2, Net Framework 4.0 and Windows
Imaging Component software. Delivered into TOOLS folder.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 11/39
 Energy Automation

4.3. PACiS GATEWAY

(Files / Component / sub- Software Modified

systems) Version (X = Yes) Comments
GtwKer.exe 0.3.40.0 Gateway kernel
GTWKerSvc.exe 0.3.40.0 Gateway kernel service
KerEccd.dll 0.3.40.0 Configuration library
KerSoc.dll 0.3.40.0
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

KerSys.dll 0.3.40.0
GtwOMM.dll 0.3.40.0
HW_APCI2200.dll 0.3.40.0 Driver DI/DO Board
HW_RS.dll 0.3.40.0 Driver DI/DO Board COM
HW_UNO4673.dll 0.3.40.0 Driver Watchdog
KStackState.exe 0.3.40.0 Statistics reading
TestHwLib.exe 0.3.40.0 Test hardware DI/DO and watchdog
Satellites
Dll_ecdd.dll 3.11.100.100
Sbus.exe 6.10.0.2
Sbus_c.dll 6.10.0.2
Tbus.exe 6.10.0.0
Sdhmi.exe 6.10.0.3
lbus.exe 6.10.0.0
SatRed
SATRED.exe 0.1.29.0 SATRED
Goose
Gooses.exe 0.3.0.3
Gooses_engine.exe 0.2.1.8 GOOSE RTX
Gooses_engine.rtss 0.2.1.8 GOOSE RTX
Scl_srvr_l.exe 0.1.0.17 GOOSE RTX
Gooses_rtx.exe 0.2.7.0 GOOSE RTX
Scl_srvr_l.rtss 0.1.0.17 GOOSE RTX
PCapFilter.rtdll 0.1.1 GOOSE RTX
IsaGRAF
IsaGTW.exe 0.5.02 Gateway Isagraf
ISAGRAF.exe 0.5.02 Isagraf
Etcp.exe 0.5.02 Isagraf (debug)
IsaIXL.dll 0.5.02 Isagraf
Isa_Ecdd.dll 0.5.02 Isagraf
PacisFunctions.dll 0.5.02 Isagraf Windows
IsaAFB.rtdll 0.5.02 Isagraf Windows
IsaHSB.dll 0.5.02 Isagraf Windows
IsaSys.dll 0.5.02 Isagraf
KSimView.exe 0.3.14 Isagraf
RtDataViewer.exe 0.4.01 Isagraf
IsaVM.rtss 0.5.02 Isagraf Windows
IsaGTWRT.rtss 0.5.02
Slave Protocols
IP_Server.dll 1.2.0.11 Ip library
IP_Client.dll 1.0.0.5
Serial.dll 1.1.0.5 Serial library
genecdd.dll 6.311.100.101 Ecdd library
redundant.dll 4.7.0.2 Redundancy library
Iec.dll 6.10.0.0 Protocol IEC 870-5-101 library
Iec104.dll 6.310.204.500 Protocol IEC 870-5-104 library
ProtTcpRouter.dll 1.313.200.200 T104 Multi Protocol
PACiS V5.1 Identification Number: 2059660
Release Note
RN – Issue I3 – 14/11/16 Page: 12/39
 Energy Automation

(Files / Component / sub- Software Modified

systems) Version (X = Yes) Comments
GtrSoc.dll 1.313.200.200 T104 Multi Protocol
Modbus.dll 6.310.100.100 Protocol Modbus library
Dnp3.dll 6.311.709.200 Protocol DNP3
IEC61850.dll 6.10.0.101 Protocol UCA-61850
cdctypeII.dll 6.10.0.0 Protocol cdc type II
SAS.dll 6.10.0.0 Protocol SAS library
opc.dll 6.10.0.0 Protocol OPC library
OPCSvr.dll 6.10.0.0 Protocol OPC server library
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

WtOPCSvr.dll 6.10.0.0 Protocol OPC toolkit server library

Master Protocols
L_Modbus.dll 6.10.0.0 Protocol Modbus Master
L_Modbus_Conf_Read.dll 6.311.310.100 Protocol Modbus Master
IECM2.dll 6.10.0.0 Protocos T101 Master level 2
L_T101M7.dll 6.10.0.0 Protocol T101 Master
L_T101M7_Conf_Read.dll 6.10.0.0 Protocol T101 Master
L_DNP3.dll 6.10.0.0 Protocol DNP3 Master
L_DNP3_Conf_read.dll 6.10.0.0 Protocol DNP3 Master
L_T103.dll 6.10.0.0 Protocol T103 Master
L_T103_Conf_Read.dll 6.10.0.0 Protocol T103 Master
L_client_OPC_Conf_Read.dlll 6.311.311.100 Protocol OPC Master
L_client_OPC.dll 6.311.708.700 Protocol OPC Master
L_client_OPC.dll 6.311.708.100 X OPC_AVE_Patch_1.1.5
L_client_OPC_Conf_Read.dll 6.311.311.100 X OPC_AVE_Patch_1.1.5
Synchronisation
NtpConf.dll 0.1.1.2 Gateway PACiS synchronisation
NtpLib.dll 0.1.1.2 Gateway PACiS synchronisation
Sntp.exe 0.1.1.2 Gateway PACiS synchronisation
SntpClient.exe 0.1.1.2 Gateway PACiS synchronisation
SntpSoc.dll 0.1.1.2 Gateway PACiS synchronisation
SntpSys.dll 0.1.1.2 Gateway PACiS synchronisation
TimeClient.dll 0.1.1.2 Gateway PACiS synchronisation
TimeMsg.dll 0.1.1.2 Gateway PACiS synchronisation
TimeServer.dll 0.1.1.2 Gateway PACiS synchronisation
Misc
Opccomn_ps.dll 1.0.0.2 Opc foundation dll
Opchda_ps.dll 1.0.0.0 Opc foundation dll
OPCProxy.dll 2.0.0.1 Opc foundation dll
Clientopc_1.2.exe 1.2.0.0 Pacis Client OPC steup
OPC_Client.exe 2.0.0.0 OPC Client Application
ClienTst.exe 1.0.0.2 Client OPC for test

Ecdd_gen.exe 3.9.0.0 Configuration generator (included in SCE)

Ecdd_conv.exe 3.9.0.0 Configuration conversion (included in SCE)
Misc
Prm.dll 0.B.2.24
prmS.dll 0.B.2.24
Misc
Dbgview.exe 4.77.0.0 Debug view
View_trace.exe 2.14.0.0 Protocol Debug view
ZIPDLL.DLL 1.3.0.0
GtwIDToUCA2.exe 2.0 Conversion gateway Id to UCA2 names
TranslateFile.exe 2.1.00 Translate file IEC101
RegistryTool.exe 3.9.0.0 Tools to edit registry
Installation
GTW_9.311.709.100.exe V9.311.709.100 Gateway Installation software

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 13/39
 Energy Automation

(Files / Component / sub- Software Modified

systems) Version (X = Yes) Comments

4.4. HELPS

(Files / Component / sub- Software Modified

systems) Version (X = Yes) Comments
HELPS Setup 3.8.1.2.exe 3.8.1.2 Installation software
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

4.5. PACiS SBUS Agency

(Files / Component / sub- Software Version Modified

systems) (X = Yes) Comments

OdFoundry V2.8
PACiS Tunnelling 9.34.0.0
WinPcap V4.1.2
SBUS Agency 9.34.0.0

4.6. PACiS SCE

(Files / Component / sub- Software Version Modified

systems) (X = Yes) Comments

sce_5.14.23.A_installer.exe 5.14.23.A#build1 X Installation software

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 14/39
 Energy Automation

4.7. PACiS SMT

Files / Component / Software version Modified Comment

sub-systems) (X=Yes)
SMT_hmi.exe K.00.06 To be checked with Windows Explorer
SMT_kernel.exe J.01.02 To be checked with Windows Explorer
SMT_icon.exe K.05.22 To be checked with Windows Explorer
smtIcon.dll K.05.22 To be checked with Windows Explorer
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

IECservices.dll K.05.01 To be checked with Windows Explorer

PERMAservices K.05.03
Hmi.jar K.06.02 Provided by the “About” window
Kernel.jar K.06.02 Provided by the “About” window

SMT Global Version K.06.02

File converter COMTRADE 2001 COMTRADE 1997

Version Version
Cid_launcher 1.0.0.1 1.0.0.1
CvtIedDist_mbus_m300 1.3.0.0 1.2.0.0
CvtIedDist_mbus_s20 1.3.1.0 1.2.1.0
CvtIedDist_t103 1.3.0.0 1.2.1.0

Note:
The smt_icon now uses a new version of Visual studio to compile. To be able to run this on Windows XP /
Windows server 2003, you mandatory need to install the vcredist_x86.exe, available in the SMT install folder.
This installation is not needed on Windows 7 32bits. Il you have a 64bits operations system, install
vcredist_x64.exe available also in the SMT install folder (VCRedist 2010 folder) – see § 8.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 15/39
 Energy Automation

5. Features
Functions

Feature List of Comments

Anomalies/Enhancements
impacting the feature
IEC61850
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

Limits and performances

RCP - Gateway
RCP – T101 - Gateway
RCP – T104 – Gateway
RCP – Modbus – Gateway
RCP – OPC - Gateway
RCP – DNP3 - Gateway
RCP – CDC Type 2 - Gateway
RCP – T101 – Computer
RCP – DNP3 - Computer
RCP – T104 – Computer
RCP – Modbus – Computer
EcoSUI
BCP – Local HMI

Digital Input acquisition

Digital measurement acquisition
Counters acquisition Limitation to 20 Hz
Analogue inputs acquisition
CT/VT input acquisition
Digital outputs
Digital setpoints
Analogue setpoints
IED interface
Power supply

Binary input processing

Measurement processing
Tap Position Indication TPI up to 64 positions in 1/N
coding
Metering Counters cannot be managed on
redundant computers
Energy counting is available from
C264 and from IED on Legacy Bus
Computer Protection functions

Data logging – System Level

Data logging – computer level
Archiving – system level
Archiving – computer level
Archiving – waveform
Reporting

Control of non-synchronised circuit

breaker
Control of synchronised circuit breaker
PACiS V5.1 Identification Number: 2059660
Release Note
RN – Issue I3 – 14/11/16 Page: 16/39
 Energy Automation

Feature List of Comments

Anomalies/Enhancements
impacting the feature
Control of disconnector
Control of transformers
Control of ancillary devices
System controls
IED controls
Setpoints
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

Interlocking equation
C264 - Configurable automation (PLC)
Fast configurable automation (PSL)
Trip circuit supervision
ATCC / AVR
GTW - Configurable automation (PLC)
C264 - iLSU

Alarm management – State basis

Alarm management – Gravity level basis
Alarm management – data basis
Alarm management – spurious alarm
Alarm acknowledgement
Alarm clearing
Audible alarms
SCP – alarm viewer
SCP – alarm banner
SCP – graphical alarm
BCP – alarm display on local HMI
Alarm notification

C264 - IED – Station Bus

C264 - IED – Modbus
C264 - IED – T103
C264 - IED – DNP3
C264 - IED – T101

GTW - IED – Station Bus

GTW - IED – Modbus
GTW - IED – T103
GTW - IED – DNP3
GTW - IED – T101
GTW - OPC Client

Time management – external clock

Time management – synchronisation

Equipment operating mode

Computer
Computer redundancy
Gateway redundancy
Station bus redundancy
Gateway IEC/IEC
Local / remote control operating mode
System dependability
Micom S1 PACiS
xAT
PACiS V5.1 Identification Number: 2059660
Release Note
RN – Issue I3 – 14/11/16 Page: 17/39
 Energy Automation

Feature List of Comments

Anomalies/Enhancements
impacting the feature
SCE, Generation See § 6 & 7.1
PERMA - Cyber Security
HELPS
SMT
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 18/39
 Energy Automation

6. Enhancements

Identification number
Requirement Devtrack Linked DFR Title Comments
ID (CR, PTR) DFR Issue issues ID
ID
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

In order to benefit from the main evolutions and fixed anomalies, do the following actions with the SCE:
- open and convert the previous configuration data base,
- make a SBUS Automatic Addressing from Ethernet network item,
- regenerated the database
Then download the new databag to the equipments (GTW, C264) via the SMT. Download also the new Micom
S1 PACiS setting files associated.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 19/39
 Energy Automation

7. Anomalies

7.1. Anomalies corrected

7.1.1. External Anomalies corrected

Identification number SubSystem Title

CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

Requirement ID (CR, Devtrack Linked DFR

PTR) DFR Issue issues ID
ID

[SCE 5.14.12] Venezuelan time zone is to be

R74 - RPLC 36458 SCE changed
AVE OLMEDO - SCE generation of the Gateway Legacy network:
PEDRALBA 36654 37471 SCE PSCN/OPC_MASTER/OPC_CLIENT
[SCE-Isagraf (C264)] Settings and user function
with "DOF" for Isagraf prefix is not taked into
account ==> Result= Isagraf doesn't work (not
O&G GMS V1 37114 SCE well compiled)

7.1.2. Merge of External Anomalies corrected

Identification number SubSystem Title

Requirement ID (CR, Devtrack Linked DFR
PTR) DFR Issue issues ID
ID

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 20/39
 Energy Automation

7.1.3. Internal Anomalies corrected

Identification number SubSystem Title

Requirement ID (CR, Devtrack Linked DFR
PTR) DFR Issue issues ID
ID

FOR AVE OPC DLL SERVER third part of

FR36654 : SCE generation of the Gateway
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

AVE OLMEDO - Legacy network:

PEDRALBA 37843 36654 GATEWAY PSCN/OPC_MASTER/OPC_CLIENT

SCE 5.1.4.21build1 / Generation crashes when

CRA_2438 36012 SCE the BD has a template put in spare

7.1.4. Merge of Internal Anomalies corrected

Identification number SubSystem Title

Requirement ID (CR, Devtrack Linked DFR
PTR) DFR Issue issues ID
ID

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 21/39
 Energy Automation

7.2. Known limitations

7.2.1. General limitations

7.2.1.1. GTW-PC
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

IsaGraf on GTW-PC: USE ONLY mono-resource (FR 26971).

GATEWAY DNP3 Master:

DNP3 Master is included into this release, but it is not yet integrated. This function shall not be used.

GATEWAY Redundant:

It must be mandatory to transmit symetrical GTW system Datapoints from GTW main and GTW backup on
IEC or on SCADA protocol. For example if Datapoints 'Operating Mode' of GTW main is transmitted, you're
obliged to transmit also 'Operating Mode' of GTW backup.

All GTW system Datapoints cannot be used by IsaGraf.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 22/39
 Energy Automation

GATEWAY OPC Client (CR 2495):

On the following test rig, which involves a GTW as OPC Client and another GTW as OPC Server as well as a
GTW as IEC 61850 Client, it has been noticed a few restrictions. Depending the device used on site (as OPC
client or server), those limitations may apply or not. Additional limitations/behavior may not seen during our
tests may also happen.

== TEST RIG ==
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

== OPERATION ==

 Do NOT use : "double usage = Yes" for DPS (various issues)

 Do NOT use : Boolean type for DPS (Jammed / Undefined : both wrongly set to "INVALID" instead to
“Jammed” or “Undefined” ; ON/OFF = Ok, though)
 DPS + Byte type = OK
 Quality code supported: Valid = 192, Bad = 0, Uncertain = 64. Set them properly in the SCE OPC Server
dedicated screen,
 Quality code CANNOT be defined on Client side (!) yet. As a result, there are many "Quality" issues that
won't be reported here.

== STARTING / BEHAVIOUR / INSTALLATION ==

 DO NOT install on 64 bits OS. “vcredistx86_2010” should also be installed on 64 bits machine but it
isn’t. As a result, 32 bits programs (SBUS.exe) won’t run. Install manually the vcredist or don’t use a 64
bits machine.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 23/39
 Energy Automation

7.2.2. Anomalies created (I&V and Validation System)

Identification number SubSystem Gravity Title

Requirement ID Devtrack DFR Linked DFR

(CR, PTR) Issue ID issues ID
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

For External Fault Reports still opened, use DevTrack Tool, or contact Schneider Electric / Energy Business /
Automation / Customer Satisfaction & Quality / Customer Technical Support - ACS.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 24/39
 Energy Automation

8. Identified risks and recommendations

Level risk of regression: LOW

8.1. HELPS
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

Project file produced with older version of HELPS can be open but will not be complete (miss xPC script).

Structure of the model files provided with HELPS have changed so if some models were modified by user to
match its configuration, those one will not work with new HELPS for the xPC scripts.

Limitation of HELPS when in Embedded mode on redundant Gateways to 1 line at a time. In all other cases
(External mode and Embedded mode without Gateway redundancy), it can simulate more than one line at a
time.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 25/39
 Energy Automation

8.2. GATEWAY

8.2.1. Logging User

Logging user to be used for Gateway is “Administrator” this for installation and Gateway user account.
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

8.2.2. Redundant GTW configuration: recommended good practices

 A dedicated SATRED Serial Physical link shall be used.

 The SATRED Ethernet TCP/IP connection shall use a dedicated 1 GB network interface when available.
 The “going to maintenance on SBUS disconnection” shall be deactivated through associated registry key option
(both redundant gateways shall stay operational even on SBUS disconnection).

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 26/39
 Energy Automation

8.2.3. ADVANTEC UNO 4683 network connection drivers

Windows 7 drivers:

Driver version for Realtek 8139:

- Date version : 07/01/2001.
- Version: 5.398.613.2003.

Driver for Intel Gigabit 82574L:

CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

- Date version : 4/2/2012

- Version : 11.17.27.0

8.2.4. Debug view notice

Under certain circumstances, with rather “heavy” loads, printing messages to DebugView is known to modify the
dynamics of the GTW. If GTW starts to reboot, switch to maintenance, or any other weird behaviors WHILE
DebugView is in use, it is recommended to filter out unwanted logging messages. We recommend using the
following filter in order to not log “noisy” useless information (in “exclude”):

heart;heard;beat;heartbit;ipnet*success;hwsetdo;checkdistate

8.2.5. Windows Registry Database entries for GTW Master Modbus protocol

Since FR25443, 2 new entries have been added in Windows registry database. Those 2 entries define the expected
polling timing for both SPS and MV. The new keys are

HKEY_CURRENT_USER\SOFTWARE\PROTOCOL\MODBUSMASTERxx\TS_POLLING_PERIOD
HKEY_CURRENT_USER\SOFTWARE\PROTOCOL\MODBUSMASTERxx\TM_POLLING_PERIOD

Where xx is the satellite number.

Note: “TM” stands for “MV” (Analogue Input) and “TS” stands for “SPS” (Digital Input).

The values are tenth of the required value (e.g. “100” means “1000 ms”) and are expressed in ms.

The default values at installation are:

- TS_POLLING_PERIOD = 30
- TM_POLLING_PERIOD = 100

i.e. respectively 300 ms and 1000 ms.

Given the above numbers, GTW will try its best to poll SPS every 300 ms and MV every 1000 ms.

It is to be noted that it is highly hardware and software configuration dependant. For information, when used on a
serial Modbus link at 19200 bits/s with 1 IED with 2500 MV + 2500 SPS, SPS WON’T be polled every 300 ms
(technically unreachable) but will be more likely to be in the average range 450 – 600 ms.

Again, the value set doesn’t mean the GTW will poll based on those times BUT will try to reach those value,
according hardware (serial? TCP?), configuration (number of data points …), etc.

It is advised to test the timing on a given test rig before sending the numbers to customers.

As of today, our testing didn’t show any malfunctions when those timing are set with a too low number for which
the GTW can’t poll fast enough.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 27/39
 Energy Automation

8.2.6. Isagraf on Windows

Since Gateway Version V9.6.14, ISaGRAF is available under Windows Seven.

ISaGRAF’s resource use:

a. In redundant configuration, ISaGRAF’s resource use is limited to two.
b. Note that the use of multiple resources degrades the performance of the GTW.
c. The use of multiple resources is justified only when very different cycle-times are required or for performance
reasons.
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

d. ISaGRAF’s resources cycle-times have the following limitations:

- Default value is defined to 200 ms. This is usually not enough for IsaGRAF under Windows.
- Minimum acceptable value is 10 ms.
- Minimum acceptable value in redundant configuration is 200 ms under Windows.
- Use of free cycle is forbidden in redundant configuration and should not be used because this can leads to
CPU 100% uses.
Resource cycle should be monitored and adjusted to avoid permanent overflow depending on the required
performances. It is to be remembered that when the cycle time is too low this is equivalent to ISaGRAF used in free
cycle condition.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 28/39
 Energy Automation

8.2.7. SNTP Synchronisation (CR2031)

GENERALITY:

The former synchronization mechanism (pre- GTW V9.6.16) was using ODTimeSrv from Agency package.
From now on (actually, from GTW V9.6.16, but version prior GTW V9.6.20 were partially bugged), a new
synchronization mechanism is taking place using an “engine” installed during Gateway installation.

Amongst other files, it’ll use SNTP.EXE (server) and SNTPClient.EXE (client) to synchronize SBUS whenever a
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

Gateway is set as a “time provider”. In that case, the former ODTimeSrv will be stopped by SNTP processes when
they are started – i.e. when Gateway starts.

On Gateway NOT used as “time provider” will still use ODTimeSrv.

When updating a former version to GTW V9.6.20 and higher, it is MANDATORY to rebuild the database using the
SCE 5.11.01 or higher. It is also mandatory to use C264 B9.08 or higher if GTW is to be set as a time provider.

SCADA SYNC. FRAME PERIOD:

A file named Synch_Timer.ini located in the Gateway root directory contains several parameters which could be
manually edited to match the pace at which SCADA is sending synchronization frame.

This file contains parameters used by each time providers (i.e. “SCADA” and “SBUS”) to configure time frame
delay reception.

It must be edited manually if any change is required; the Gateway software must be restarted in order for the
parameter to be taken into account.

Format (showing default values):

SYNCH]

Scada_Time_synchro= 900000
Scada_Time_ratio=10

Time_synchro=15000
Time_ratio=300

ShowWindow=0

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 29/39
 Energy Automation

The information related to timeouts is given in the following table:

period (in ms) within which the SCADA set as a time provider is expected to
Scada_Time_synchro
send a time synchronization frame.
Percentage applied to Scada_Time_Synchro upon which, if no time
synchronization frame has been received from SCADA since last sync. frame, the
Scada_Time_ratio Gateway will be set as “not synchronized” (will set windows database registry
“Synchro” key as well as IEC 61850 “SyncST” to “0”). That will be taken into
account only if the active time provider is the SCADA set as time provider.
period (in ms) within which the Gateway is expecting to receive an SNTP frame
Time_synchro
CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

from SBUS.
Percentage applied to Time_Synchro upon which, if no SNTP frame has been
received on SBUS since last frame, the Gateway will be set as “not
Time_ratio synchronized” (will set windows database registry “Synchro” as well as IEC
61850 “SyncST” to “0”). That will be taken into account only if the active time
provider is the one monitoring SBUS.

ShowWindow is a debug/information parameter. When set to “1”, it’ll force to show the SNTP Information
Window. That parameter is equal to “0” by default.

8.2.8. MODBUS Slave (CR 2498)

 GTW Modbus Slave (Two Coils managed by "BPCS SCADA" for One DPC on PACiS Side),
 'TCP Router' for connection of 4 SCADA on same IP/Port.

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 30/39
 Energy Automation

9. Compatible supplies

9.1. External supplies

See Document PACiS_V5_RN_External_Compatibility_A.doc

CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

9.2. HW_SW_C264

See Document HW-SW_C264_compliance.xls

PACiS V5.1 Identification Number: 2059660

Release Note
RN – Issue I3 – 14/11/16 Page: 31/39
 CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

PACiS V5.1
Release Note
RN – Issue I3 – 14/11/16
Energy Automation

Identification Number: 2059660

Page: 32/39
 CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

PACiS V5.1
Release Note
RN – Issue I3 – 14/11/16
Energy Automation

Identification Number: 2059660

Page: 33/39
 CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

PACiS V5.1
Release Note
RN – Issue I3 – 14/11/16
Energy Automation

Identification Number: 2059660

Page: 34/39
 CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

PACiS V5.1
Release Note
RN – Issue I3 – 14/11/16
Energy Automation

Identification Number: 2059660

Page: 35/39
 CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

PACiS V5.1
Release Note
RN – Issue I3 – 14/11/16
Energy Automation

Identification Number: 2059660

Page: 36/39
 CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

PACiS V5.1
Release Note
RN – Issue I3 – 14/11/16
Energy Automation

Identification Number: 2059660

Page: 37/39
 CONFIDENTIAL. All rights reserved SCHNEIDER ELECTRIC. Passing on and copying of this document, use and communication of its contents are not permitted without prior written authorization.

RN – Issue I3 – 14/11/16
Energy Automation

Identification Number: 2059660

Page: 38/39
 Energy Automation

11. Database Compatibility

Identification Number: 2059660

RN – Issue I3 – 14/11/16 Page: 39/39