A

hybr id c onta ct lens f or astigmat ism TM

FITTING GUIDE & TIPS FOR ACHIEVING SUCCESS

 A
hybrid contact l e n s for as t i g m a tis m TM
 Contents

Overview 2
...............................................................................................................................
Patient Candidates 2
...............................................................................................................................
Key Features of SynergEyes® A 3
...............................................................................................................................
SynergEyes® A Lens Design 4
...............................................................................................................................
Diagnostic Set 5
...............................................................................................................................
Key Fitting Principles 6-7
...............................................................................................................................
Normal Corneas 6
...............................................................................................................................
Irregular Corneas 6-7
...............................................................................................................................
Fitting SynergEyes® A 8-10
...............................................................................................................................
Ideal SynergEyes® A Fit on a Normal Cornea 11
...............................................................................................................................
SynergEyes® A Fit on a Keratoconic Cornea 12
...............................................................................................................................
SynergEyes® A Fit on a Post Surgical Cornea 13
...............................................................................................................................
Troubleshooting & Tips for Success 14-19
...............................................................................................................................
Enhanced Profile Lens 20
...............................................................................................................................
SynergEyes® A Fitting Flowchart 21
...............................................................................................................................
Available Parameters back cover
...............................................................................................................................
Contact Information back cover
...............................................................................................................................
1
 Overview

The SynergEyes® A hybrid contact lens combines a high Dk rigid

gas permeable center and a low-water, non-ionic soft skirt to
give patients with regular or irregular astigmatism the best of
both worlds: the crisp visual acuity of a rigid lens and the all-day
comfort and stability of a soft lens.

Patient Candidates

· Patients with moderate to severe amounts of corneal

astigmatism
· RGP wearers looking for improved comfort and elimination
of irritating debris that collects underneath RGP lenses
· Soft toric wearers desiring more consistent vision and
improved acuity both day and night
· Soft lens wearers wanting crisp, high definition vision
· Active patients and other vision demanders that
require the pristine vision of an RGP lens but cannot
tolerate lens dislodgement and other wearability issues
· Previous contact lens wearers that dropped out due to
discomfort, less-than-optimal vision, night vision problems,
or instability on the eye
· Patients with irregular astigmatism, mild stages of
keratoconus, and mildly oblate corneas

2
Key Features of SynergEyes® A
SynergEyes ® A
1. 100 Dk rigid gas
permeable center tear layer provides
allows high oxygen

SC
astigmatism correction

LE
RA
transmission to
soft lens skirt is dimensionally
better satisfy stable and expansion-free
corneal uptake
precision optics centered
2. Rigidity of lens

DK RGP
over visual axis
center delivers rotationally stable platform

HIGH
optimal visual acuity
3. Astigmatism IRT A
E
100 Dk RGP center allows
FT R N

correction without
SK
SO C O

high oxygen transmission

the inconsistent for healthy, all-day wear
axis shift often
associated with soft
toric lenses
Design Features of SynergEyes® A
4. Lens centration
ensures that the precision optics are centered directly
over the visual axis
5. Hydrophilic, non-ionic soft skirt provides all-day comfort
6. Uniform edge engineered for maximum comfort across
full power range
7. Exclusive patented HyperBond™ junction makes
SynergEyes hybrid lenses much stronger than any other
marketed hybrid contact lens1
8. Proprietary HydrolEyes™ surface science allows for
outstanding in-vivo wetting and all-day comfort

1 Data on file. 3
 SynergEyes® A Lens Design

Paragon HDS® 100 Non-Ionic

Rigid Center 27% Water
100 Dk Hydrogel Skirt

8.4 mm
Rigid Center Diameter

14.5 mm
Overall Diameter

· Rigid lens optic zone is 7.8mm, with a peripheral curve that

blends across the junction to the soft skirt.
· Available in 10 base curves ranging from 7.10mm to 8.00mm
in 0.1mm steps.
· Each base curve comes with two skirt curve options: 1.0mm
or 1.3mm flatter than the base curve.
· Thicker enhanced profile lens design is also offered to reduce
flexure resulting from high amounts of corneal astigmatism.
4
 Diagnostic Set

To enable practitioners to check the fit of the lens and to allow

patients to experience the acuity and comfort SynergEyes
lenses offer, a 20-lens diagnostic set is available. The diagnostic
set includes lenses in 10 base curves ranging from 7.10mm to
8.00mm in 0.1mm steps, and each base curve is available in
two skirt curve options. All of the diagnostic lenses are -3.00D
in sphere power.
If conducting a fluorescein evaluation with the diagnostic
lenses, it is important to use high molecular weight fluorescein
and place it in the bowl of the lens before inserting the lens.

SynergEyes Diagnostic Set

5
 Key Fitting Principles

When fitting the SynergEyes® A lens, the goal is to find a base

curve that supplies enough sagittal depth to vault over the
central cornea and a skirt curve that provides fit alignment.

Normal Corneas
When fitting the SynergEyes® A lens on normal, healthy corneas,
it is important that the lens always be fit steeper than flat K. A
successful SynergEyes fit results in a lens that rides on a layer of
tears. By creating this tear layer underneath the lens, an effective
tear pump mechanism is produced.
The following fitting principles apply:
· Spherical corneas do well with a base curve 1.00D steeper
than flat K
· Astigmatic corneas (with up to 1.50D of corneal astigmatism)
require a base curve 1.50D steeper than flat K
· Patients with more than 1.50D of corneal astigmatism may
require an even steeper base curve

Irregular Corneas
The appropriate SynergEyes® lens design selection should be
based on the shape of the cornea, not just the patient history
or diagnosis.

When working with a patient who has an irregular cornea,

empirical fitting is not possible and will not result in a proper fit.
You must use the SynergEyes® A diagnostic set and conduct an
in-office fluorescein evaluation to verify the proper fit.
6
 Key Fitting Principles, co n t inue d

The SynergEyes® A lens may

be fit empirically on normal
corneas; however, fluorescein
evaluation using high
molecular weight fluorescein
(i.e., Fluoresoft®) is highly
recommended for the first 3-5
fits or until you are comfortable
fitting the hybrid platform.
When using the diagnostic
lenses to evaluate the fit,
it is important to use high
molecular weight fluorescein Ideal SynergEyes® A Fit
and place it in the bowl of the
lens before inserting the lens.

Although it may seem counter-

intuitive,the appropriate way to
correct a tight/flat fitting lens
in most cases is to steepen the
base curve. Lenses with little
or no movement that appear
tight actually mean the lens
is touching too much of the
cornea. Steepening the base
curve will correct this fit.
Flat Fitting Lens
7
 Fitting SynergEyes® A

Step 1: Selecting the Initial Lens

Normal
PROOFCorneas
1 TEL MAC_VOL SDP

Use the handheld slide rule or electronic

SynergEyes® A STEP 2
Slide Rule calculator to determine the base curve and
1. With Rx in minus cylinder form, enter the Sphere Power
in the left window. Do not use spherical equivalent.
For Normal Corneas skirt curve of the initial lens based on K
Order the Lens Power that appears in the right window.
Sphere Lens
STEP 1
1. Enter Flat K in left window.
readings. Power Power

2. Center window displays Base Curve, right window -7.00 -8.00

displays Skirt Curve.
Enter Base Skirt
Turn the slide rule to the reverse side and,
(Note: Vertex adjustments for power are already factored
Flat K Curve Curve

42.25 7.70 8.7

with Rx in minus cylinder form; enter the
into slide rule.)

SynergEyes® A Fitting Tips

See reverse side for step 2.
patient’s sphere power (NOT the spherical
• Never prescribe flatter than or “on” flat K;
equivalent) into the window on the left.
prescribe lenses at least 1.50D steeper than
flat K.
• Empirical fitting using this slide rule is
Note: Vertex adjustments for power are already
not recommended for irregular corneas.
Diagnostic fitting is essential to evaluate the
factored
proper fit.
into the slide rule calculations.
• Each 0.1mm of base curve change requires a
0.50D power adjustment.
Order the lens power that appears in the
• For patients with a high level of astigmatism,

right window.
consider ordering the lens in the Enhanced
Profile design.
• For powers greater than those listed, please
Ifuse the online calculator or call consultation
performing a diagnostic evaluation, select
at the number provided below.
the diagnostic lens in the recommended
A Customer Care:
parameters
877-733-2012, option 1
and follow the instructions for
Hybrid Contact Lens for Astigmatism Consultation: 877-733-2012, option 2

www.synergeyes.com
insertion on Page 9.
© 2008 SynergEyes, Inc.

Irregular Corneas PN 75110

Use the SynergEyes® A slide rule

Use topography to determine the steepest
to select the initial lens when
fitting normal corneas. area on the cornea and select an initial base
curve closest to the steepest corneal radius.
In the absence of topography, choose the
initial diagnostic lens closest to steep K to
vault over the entire ectasia.
8
Fitting SynergEyes® A, co n t inue d

Step 2: Insert the Diagnostic Lens

1. Stabilizing the lens between the
index and middle finger (see photo),
instill 1 drop of high molecular weight
Fluorescein (i.e. FluoreSoft®) into the
bowl of the lens and fill the rest of the
bowl with saline.
Bowl of lens filled with
fluorescein and saline

2. Ask the patient to

lean forward and tuck
their chin to chest. The
patient’s nose should be
pointing toward the floor.

Patient position during insertion

3. Have the patient hold one lid back, while

you retract the other and insert the lens.
4. Allow excess fluorescein to dissipate for
approximately 15-30 seconds.
5. Observe the fluorescein pattern and
evaluate the lens/cornea fitting
relationship.
Patient holding one lid back
9
 Fitting SynergEyes® A, continued

Step 3: Evaluate the Fit

Normal Corneas
The ideal SynergEyes® A fit on a normal cornea will exhibit:
• Apical clearance over the central cornea (the optimum
fit shows no touch in the rigid zone of lens – total
corneal clearance)
• Light landing at the RGP periphery
• Alignment under the soft skirt
• Soft skirt free of scleral impingement
• Soft skirt free of edge fluting
• Lens free to move on lid-push-up

To view videos of ideal lens movement,

insufficient lens movement,
and excessive lens movement,
visit the practitioner site at
www.FitSynergEyes.com.

10
Ideal SynergEyes® A Fit on a Normal Cornea

Apical Clearance as Indicated by

Slight Fluorescein Pooling Slight Fluorescein
Presence at Limbus
with Scleral Support
from Soft Skirt

Light Landing at the

RGP Periphery with
Fluorescein Dispersing
Through Junction

11
 SynergEyes® A Fit on a Keratoconic Cornea

Step 3: Evaluate the Fit (continued)

Irregular Corneas
The ideal SynergEyes® A fit on a prolate cornea will exhibit
central clearance. If touch is observed, the patient may not
be a candidate for the SynergEyes® A lens.

Ideal SynergEyes® A Fit on a Keratoconic Cornea

Apical Clearance as
Indicated by Fluorescein
Pooling without Touch

Light Landing at the

RGP Periphery with
Fluorescein Dispersing
Through Junction

Unacceptable SynergEyes® A Fit on a Keratoconic Cornea

Persistent Central
Bubble not Caused by
Insertion Error

Touch Indicates Lens

does not Provide
Corneal Clearance

12
SynergEyes® A Fit on a Post Surgical Cornea

Step 3: Evaluate the Fit (continued)

The ideal SynergEyes® A fit on an oblate cornea will show central
fluorescein pooling without a bubble. If a persistent central
bubble is observed, the patient may not be a candidate for
the SynergEyes® A lens.

Ideal SynergEyes® A Fit on a Post Surgical Cornea

Fluorescein Pooling
without Bubble

Unacceptable SynergEyes® A Fit on a Post Surgical Cornea

Persistent Central
Bubble not Caused by
Insertion Error

13
 Troubleshooting & Tips for Success

Bubbles
Because air bubbles can affect the appearance of the
fluorescein pattern, it is critical to eliminate them prior to
evaluating the fit. A bubble does not necessarily indicate
that the lens is too steep.

• If a bubble is seen underneath

the lens upon insertion, the
lens has not been inserted
properly. Insertion bubbles
may occur because there
are areas within the optic
zone that could trap air
pockets if the lens is not
inserted properly.
• If there are bubbles under
the lens, you must remove
the lens and re-insert it.
Make certain that the bowl
of the lens is filled to the
TOP with saline.
A bubble does not necessarily mean • Bubbles are less likely to
the lens is too steep.
occur if patient maintains
fixated gaze (straight to
the floor) throughout the
insertion process.

14
 Troubleshooting & Tips for Success

Bubbles vs. Touch

Bubbles are
indicated by a
very distinct
outer edge

Touch patterns
typically
have a less
defined edge.

15
 Troubleshooting & Tips for Success

Base Curve Changes

The base curve of the SynergEyes® A lens may be steepened to:
• Provide a better fit for patients with higher amounts of
corneal astigmatism
• Improve patient comfort
• Provide greater corneal clearance, which will increase lens
movement

Remember that every 0.1mm base curve change will require

a 0.50D adjustment in power. Employ the SAM/FAP (Steeper
Add Minus/Flatter Add Plus) rule.

Central Bearing

16 Base Curve Too Flat - Steepen Base Curve (Ex. 7.7mm BC -> 7.6mm BC)
 Troubleshooting & Tips for Success

Base Curve Changes (continued)

Consider using a base curve steeper than that initially
recommended by the slide rule or electronic calculator when:
• A patient has more than 1.50D of corneal astigmatism
• Fluorescein evaluation shows apical touch
• Patient complains of initial discomfort or discomfort after
wearing the lenses for a period of time
• Lens does not exhibit movement on blink or push up
The base curve of the SynergEyes® A lens may be flattened to:
• Decrease excessive lens movement
Consider flattening the base curve when:
• Lens shows excessive amounts of movement
• Fluorescein evaluation shows excessive central pooling

Lack of
Fluorescein
Excessive
in RGP
Fluorescein
Periphery &
Pooling
Junction Area
Centrally

Fluorescein
Pooling Under
Soft Skirt
Periphery

Base Curve Too Steep - Flatten Base Curve (Ex. 7.6mm BC -> 7.7mm BC) 17
 Troubleshooting & Tips for Success

Fluorescein
Pooling Under
the Periphery of
the Soft Skirt

Heavy Bearing
at RGP
Periphery,
with Complete
Absence of
Fluorescein.

Skirt Curve Too Flat

18
 Troubleshooting & Tips for Success

Skirt Curve Changes

The skirt curve of the SynergEyes® A lens may be steepened to:
• Improve patient comfort
• Increase lens movement
Consider using a steeper skirt curve when:
• Patient complains of discomfort initially or after a few hours
of wear time, and steepening the base curve does not
improve comfort
• Lens does not exhibit movement on blink or push up and
the use of a steeper base curve does not adequately increase
lens movement
• Edge fluting is observed
• Fluorescein evaluation shows a dark heavy ring of bearing at
the junction of the rigid center and soft skirt.*
• Fluorescein evaluation shows pooling under the periphery
of the soft skirt
The skirt curve of the SynergEyes® A lens may be flattened to:
• Improve patient comfort
Consider using a flatter skirt curve when:
• Lens exhibits edge impingement

* If the patient is already wearing the steeper skirt, call SynergEyes

consultation to discuss ordering a custom lens with a steeper
skirt or the peripheral blend design, which slightly flattens
the RGP periphery and soft skirt to create a less pronounced
landing zone across a broader area of the peripheral cornea.
19
 Enhanced Profile Lens

The SynergEyes® A lens is available in an enhanced profile

thickness that will improve visual acuity when a patient’s
corneal astigmatism is not completely corrected by the standard
thickness lens.
Consider ordering the enhanced profile lens when:
• Empirically fitting a patient with more than 2.00D of corneal
astigmatism
• Over-refraction on top of the lens yields a sphero-cylindrical
Rx consistent with lens flexure
• Keratometry or topography with the lens on eye produces a
cylindrical reading
• Lens flexure is >0.50D

D PROFILE RIGID CE
ANCE NT
ENH ER

T EA
IR RN
SK CO
FT
SO
SYNERGEYES ENHANCED PROFILE LENS

DARD RIGID CENTER

S TA N

IR
T EA
RN
SK CO
FT
SO
S TA N D A R D S Y N E R G E Y E S L E N S

20
SynergEyes® A Fitting Flowchart

Use the following flow chart when evaluating the fit of the SynergEyes® A diagnostic lenses.

Determine initial
base curve and skirt curve using
the slide rule, online calculator,
consultation, or topography.

Place one to two drops high molecule

fluorescein into the bowl of the lens.
Fill the remainder of the bowl with
saline and apply the lens.

Allow excess fluorescein to dissipate,

then observe pattern and movement If edge fluting
is observed:

IF LARGE CENTRAL IF INSUFFICIENT IF THERE IS NO

BUBBLE (>2MM) APICAL CLEARANCE LENS MOVEMENT UPON BLINK:
IS PRESENT: IS OBSERVED:

Confirm appropriate apical clearanc

Remove lens and Steepen (decrease)
re-insert with solution the base curve
filling the bowl radius by 0.1mm*
Insufficient Sufficie
apical clearance apical clea
If bubble persists,
flatten (increase)
base curve Steepen Steepe
radius by 0.1mm* base curve* skirt cur

Re-evaluate fit with new lenses.

* Every 0.1mm base curve change will
require a 0.50D adjustment in power.
Employ the SAM/FAP (Steeper Add
Minus/Flatter Add Plus) rule.
When best fit is achieved,
over-refract to determine final lens power.

21
 Page cut here to
create flap.

IF RESIDUAL
ASTIGMATISM DUE TO
FLEXURE IS OBSERVED:

ce.
Order the thicker,
enhanced profile
design. Patients
nt
arance with higher
amounts of corneal
cylinder may also
en benefit from a
rve steeper base curve.*
Page cut here to
create flap.
For additional information on
fitting SynergEyes® A, please visit
www.FitSynergEyes.com.
 SynergEyes® A Parameters
Material Paflufocon D center
(hemiberfilcon A skirt)
Dk 100
Water Content 27% (soft skirt)
Diameter 14.5mm
Base Curve 7.10 to 8.00 in .10mm steps
Skirt Curvature 1.0 (steep) & 1.3 (flat)
Sphere Power +4.00D to -8.00D in .25D steps
-8.50 to -20.00 in 0.50D steps
+4.25 to +8.00 in .25D steps
+8.50 to +20.00 in .50D steps
Wear Indications Daily Wear
Replacement Cycle 6 Month
Lens Care Hydrogen Peroxide

In-stock parameters ship next day. Please allow

1-2 weeks for custom and Enhanced Profile lenses.

Customer Care
PHONE: 877.733.2012, option 1

Consultation
PHONE: 877.733.2012, option 2
©2009, SynergEyes, Inc. 75006, Rev. E

www.synergeyes.com 877-SEE-2012