Illumination

LUXEON SunPlus
2835 Line
LEDs engineered to deliver the precise
wavelengths of light needed to improve
crop yield
The LUXEON SunPlus 2835 Line is purpose-built to enable ease of system

design for Horticulture applications. The LUXEON SunPlus 2835 Line

offers the only LEDs available today that are binned and tested based

on Photosynthetic Photon Flux (PPF). The LUXEON SunPlus 2835 Line

includes options for single driver solutions and multi-channel, color

tunable solutions.

Features and Benefits Primary Applications

120° angle for uniform light distribution for greenhouse, vertical farming
and interweaving applications Horticulture

2.8 x 3.5mm package

No. E507562

DS237 LUXEON SunPlus 2835 Line Product Datasheet ©2021 Lumileds Holding B.V. All rights reserved.
Table of Contents

General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Photon Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PPF Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. i
General Product Information

Product Test Conditions

LUXEON SunPlus 2835 Line LEDs are tested and binned with a DC drive current of 120mA at a junction temperature, Tj, of 25°C.

Part Number Nomenclature

Part numbers for LUXEON SunPlus 2835 Line follow the convention below:

L 1 S P – A A A B B 0 C C 0 0 0 0 0

Where:

A A A – designates color (FRD=Far Red, DRD=Deep Red, PRP=Purple, RYL=Royal Blue, LME=Lime and
PNK=Horticultural White)

B B – designates typical percentage of PPF in the blue spectrum (420 to 480nm) vs. the total PPF in the
Photosynthetic Active Radiation (PAR) region (400 to 700nm), which applies only to purple LEDs
(00=2.5%, 10=12.5% and 20=25%)

C C – designates package size (28=2835)

Therefore, the following part number is used for a LUXEON SunPlus 2835 Royal Blue:

L 1 S P – R Y L 0 0 0 2 8 0 0 0 0 0

Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON SunPlus
2835 Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the
following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or
polybrominated diphenyl ethers (PBDE).

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 2
Performance Characteristics

Product Selection Guide

Table 1. Product performance of LUXEON SunPlus 2835 Line at 120mA, Tj=25°C.
Peak Wavelength PPF (µmol/s) [1] PPF/W
(nm) in PAR (400 to 700nm) [2] Part
Color TYPICAL
Number
Minimum Maximum Minimum Typical (µmol/J)

Horticulture White – – 0.71 0.78 2.28 L1SP-PNK1002800000

Purple (2.5% Blue) [4]
– – 0.58 0.63 1.84 L1SP-PRP0002800000
Purple (12.5% Blue) [5] – – 0.64 0.70 2.04 L1SP-PRP1002800000
Purple (25% Blue) [6]
– – 0.67 0.74 2.16 L1SP-PRP2002800000
Far Red 720 740 0.54 0.60 [3]
2.32 L1SP-FRD0002800000
Deep Red 650 670 0.56 0.62 2.32 L1SP-DRD0002800000
Royal Blue 440 455 0.67 0.74 2.06 L1SP-RYL0002800000
Lime – – 0.72 0.80 2.22 L1SP-LME0002800000
Notes for Table 1:
1. Lumileds maintains a tolerance of ±7.5% on µmol/s measurements for LUXEON SunPlus 2835.
2. PAR is the photosynthetic active radiation from 400 to 700nm.
3. Far Red typical PPF is measured from 700 to 800nm.
4. PPF in blue spectrum (420–480nm) ranges from 0–5% of total PPF in PAR (400–700nm). Typical PPF in the blue spectrum is 2.5%.
5. PPF in blue spectrum (420–480nm) ranges from 10–15% of total PPF in PAR (400–700nm). Typical PPF in the blue spectrum is 12.5%.
6. PPF in blue spectrum (420–480nm) ranges from 20–30% of total PPF in PAR (400–700nm). Typical PPF in the blue spectrum is 25%

Optical Characteristics
Table 2. Optical characteristics for LUXEON SunPlus 2835 Line at 120mA, Tj=25°C.

TYPICAL TEMPERATURE
TYPICAL SPECTRAL Typical Total Typical
Part Number COEFFICIENT OF DOMINANT
HALF-WIDTH [1] (nm) Included Angle [2] Viewing Angle [3]
WAVELENGTH (nm/°C)

L1SP-PNK1002800000 – – 140° 120°

L1SP-PRPxx02800000 – – 140° 120°
L1SP-RYL0002800000 15 0.04 140° 130°
L1SP-LME0002800000 – 0.01 140° 120°
L1SP-FRD0002800000 30 0.17 140° 130°
L1SP-DRD0002800000 20 0.16 140° 130°
Notes for Table 2:
1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity.
2. Total angle at which 90% of the total luminous flux is captured.
3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 3
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON SunPlus 2835 Line at 120mA, Tj=25°C.

Forward Voltage [1] (Vf) Typical Temperature Typical Thermal

Part Number Coefficient of Forward Resistance—Junction
Minimum Typical MAXIMUM Voltage [2] (mV/°C) to Solder Pad (°C/W)

L1SP-PNK1002800000 2.70 2.85 3.00 -2.0 13.0

L1SP-PRPxx02800000 2.70 2.85 3.00 -2.0 to -4.0 13.0
L1SP-FRD0002800000 1.80 2.15 2.50 -1.2 15.0
L1SP-DRD0002800000 1.80 2.15 2.50 -2.4 15.0
L1SP-RYL0002800000 2.80 3.00 3.20 -2.5 25.0
L1SP-LME0002800000 2.80 3.00 3.10 -1.7 25.0
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C and 85°C.

Absolute Maximum Ratings

Table 4. Absolute maximum ratings for LUXEON SunPlus 2835 Line.

PURPLE AND
Parameter FAR RED DEEP RED ROYAL BLUE LIME
HORTICULTURE WHITE
DC Forward Current [1, 2] 480mA 300mA 250mA 240mA 240mA
Peak Pulsed Forward Current [1, 3] 500mA 350mA 300mA 300mA 300mA
LED Junction Temperature [1]
(DC & Pulse) 125°C 125°C 125°C 125°C 125°C
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 2
Operating Case Temperature [1] -40°C to 105°C -40°C to 105°C -40°C to 105°C -40°C to 95°C -40°C to 105°C
LED Storage Temperature -40°C to 105°C -40°C to 105°C -40°C to 105°C -40°C to 95°C -40°C to 105°C
Soldering Temperature 20°C to 260°C
Allowable Reflow Cycles 3
Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude of ≤15% of the maximum
allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding
maximum junction temperature.
3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse-on time is ≤5ms per cycle and the duty cycle is ≤50%.
4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse
voltage does not exceed 5V and the reverse current is less than 220uA.
5. Max 5V reverse for up to 10s is an acceptable beginning of life, one time test condition.

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 4
Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1. Typical normalized power vs. wavelength for LUXEON SunPlus 2835 Line at 120mA, Tj=25°C.

Photon Output Characteristics

Figure 2a. Typical normalized photon output vs. junction temperature

for LUXEON SunPlus 2835 Royal Blue, Deep Red, Far Red, Horticulture White, and Purple at 120mA.

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 5
 Figure 2b. Typical normalized photon output vs. junction temperature for LUXEON SunPlus 2835 Lime at 120mA.

Figure 2c. Typical normalized photon output vs. forward current

for LUXEON SunPlus 2835 Royal Blue, Deep Red, Far Red, Horticulture White, and Purple at Tj=25°C.

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 6
 Figure 2d. Typical normalized photon output vs. forward current for LUXEON SunPlus 2835 Lime at Tj=25°C.

Forward Current Characteristics

Figure 3a. Typical forward current vs. forward voltage

for LUXEON SunPlus 2835 Royal Blue, Deep Red, Far Red, Horticulture White, and Purple at Tj=25°C.

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 7
 Far Red
Deep Red
Royal Blue
Lime
Cool White

Figure 3b. Typical forward current vs. forward voltage for LUXEON SunPlus 2835 Lime at Tj=25°C.

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 8
Radiation Pattern Characteristics

Figure 4. Typical radiation pattern for LUXEON SunPlus 2835 Line at 120mA, Tj=25°C.

Figure 5. Typical polar radiation pattern for LUXEON SunPlus 2835 Line at 100mA, Tj=25°C.

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 9
Product Bin and Labeling Definitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.

All emitters packaged within a reel are of the same bin combination.

LUXEON SunPlus 2835 Line LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:

A B B C

Where:

A – designates PPF bin (example: J= 0.7 to 0.75 µmol/s, K= 0.75 to 0.80 µmol/s)

B B – designates color or peak wavelength bin (example: 10=720 to 740nm)

C – designates forward voltage bin (example: B=1.8 to 2.0V, C=2.0 to 2.2V)

Therefore, LUXEON SunPlus 2835 Far Red with a PPF range of 0.55 to 0.60 µmol/s, peak wavelength of 720 to 740nm and a
forward voltage range of 1.80 to 2.0V has the following CAT code:

F 1 0 B

PPF Bins
Table 5 lists the standard PPF bins for LUXEON SunPlus Series. Although several bins are outlined, product availability in a
particular bin varies by production run and by product performance.

Table 5. PPF bin definitions for LUXEON SunPlus 2835 Line.

PPF [1] (µmol/s)
Bin
Minimum Maximum
D 0.45 0.50
E 0.50 0.55
F 0.55 0.60
G 0.60 0.65
H 0.65 0.70
J 0.70 0.75
K 0.75 0.80
L 0.80 0.85
M 0.85 0.90
N 0.90 0.95
P 0.95 1.00
Q 1.00 1.05
R 1.05 1.10
Notes for Table 5:
1. Lumileds maintains a tolerance of ±7.5% on µmol/s measurements.

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 10
Color Bin Definitions
Table 6. Color bin definitions for LUXEON SunPlus 2835 Line.
PRODUCT COLOR BIN [1]
Purple (2.5% Blue) DA
Purple (12.5% Blue) FA
LUXEON SunPlus 2835 Line Purple (25% Blue) HA
Lime 20
Horticulture White GA
Notes for Table 6:
1. Lumileds maintains a tester tolerance of ±0.005 on color bin coordinates

Peak Wavelength Bins

Table 7. Peak wavelength bins for LUXEON SunPlus 2835 Line at specified test conditions.
PEAK WAVELENGTH [1] (nm)
PRODUCT COLOR BIN
Minimum Maximum
Far Red 10 720 740
Deep Red 10 650 670
LUXEON SunPlus 2835 Line 30 440 445
Royal Blue 40 445 450
50 450 455
Notes for Table 7:
1. Lumileds maintains a tolerance of ±2.0nm on peak wavelength measurements.

Forward Voltage Bins

Table 8. Forward voltage bin definitions for LUXEON SunPlus 2835 Line at specified test conditions.
Forward Voltage [1] (Vf)
PRODUCT COLOR BIN
Minimum Maximum
B 1.80 2.00

Far Red C 2.00 2.20

Deep Red D 2.20 2.40
E 2.40 2.60
Z 2.70 2.80
LUXEON SunPlus 2835 Line
A 2.80 2.90
Royal Blue
Purple B 2.90 3.00
Lime C 3.00 3.10
Horticulture White
D 3.10 3.20
E 3.20 3.30
Notes for Table 8:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements for LUXEON SunPlus 2835 Line.

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 11
Mechanical Dimensions

Figure 6. Mechanical dimensions for LUXEON SunPlus 2835 Line.

Notes for Figure 6:
1. Drawings are not to scale.
2. All dimensions are in millimeters.

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 12
Reflow Soldering Guidelines

tp
Tp

Critical Zone
Ramp-up TL to Tp

TL
tL
Temperature

Tsmax

Tsmin
Ramp-down
ts
Preheat Area

25
Time 25ºC to Peak
Time JEDEC J-STD-020D

Figure 7. Visualization of the acceptable reflow temperature profile as specified in Table 9.

Table 9. Reflow profile characteristics for LUXEON SunPlus 2835 Line.

PROFILE FEATURE Lead-Free Assembly

Preheat Minimum Temperature (Tsmin) 150°C

Preheat Maximum Temperature (Tsmax) 200°C
Preheat Time (tsmin to tsmax) 60 to 120 seconds
Ramp-Up Rate (TL to Tp) 3°C / second maximum
Liquidous Temperature (TL) 217°C
Time Maintained Above Temperature TL (tL) 60 to 150 seconds
Peak / Classification Temperature (Tp) 260°C
Time Within 5°C of Actual Peak Temperature (tp) 20 to 40 seconds
Ramp-Down Rate (Tp to TL) 6°C / second maximum
Time 25°C to Peak Temperature 8 minutes maximum

JEDEC Moisture Sensitivity

Table 10. Moisture sensitivity levels for LUXEON SunPlus 2835 Line.
Floor Life Soak Requirements Standard
PRODUCT level
TIme Conditions Time Conditions
LUXEON SunPlus 2835 Line 2 1 Year ≤30°C / 60% RH 168 Hours +5 / -0 85°C / 60% RH

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 13
Solder Pad Design

Figure 8. Recommended PCB solder pad layout for LUXEON SunPlus 2835 Line.

Notes for Figure 8:

1. Drawings are not to scale.
2. All dimensions are in millimeters.

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 14
Packaging Information

Pocket Tape Dimensions

Figure 9. Pocket tape dimensions for LUXEON SunPlus 2835 Line.

Reel Dimensions

Figure 10. Reel dimensions for LUXEON SunPlus 2835 Line.

Notes for Figures 9 and 10:
1. Drawings are not to scale.
2. All dimensions are in millimeters.

DS237 LUXEON SunPlus 2835 Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved. 15
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world better, safer, more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.

©2021 Lumileds Holding B.V. All rights reserved. Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
LUXEON is a registered trademark of the Lumileds direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. in the United States and other countries. Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
lumileds.com warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.
DS237 LUXEON SunPlus 2835 Line
Product Datasheet 20210615