WOODCARVING

TOOLS, AMTERIALS
& EwIPMENT
VOLUME 1
 WOODCARVING
TOOLS, MATERIALS
& EQUIPMENT

VOLUME 1

GUILD OF MASTER CRAFTSMAN PUBLICATIONS L I E

 F~rste d ~ t ~ published
an 1994 by
Gudd of Master Craftsman Pubhcatrons Ltd
Castle Place, 166 Hlgh Street,
Lewes, East Sussex BN7 1XU

Reprinted 1996, 1997,2000

Thn new edrtron m two volumes ZOO2

Reprinted 2003,2007

Text Q Christopher 1. Pye 1994,2002

Q in the Work GMC Publications 2002
Principal photography by Chris Skarbon,
Q GMC Publications 2002;
other photography as listed on page 234
Line drawings Q Christopher 1. Pye 1994, 2002,
except where otherwise stated

ISBN-13 978-1-86108-201-5 (Volume 1)

ISBN-10 1-86108-201-0 (Volume 1)
ISBN 1-86108-202-9 (Volume 2)
(ISBN 0-946819-49-1first edlt~on)

All rights reserved

The nght of Chr~sto~her] Pye to be ~dent~fied

a s the author of thu
work has been asserted m accordance wlth the Copyrrght Des~gns
and Patenw Act 1988, sectlons 77 and 78.

No part of this publication may be reproduced, stored in a renieval

system or transmitted in any form or by any means without the prior
permission of the publisher and copyright owner

Whllst every effort has been made to obta~npermusron from the

copyright holders for all matenal used m t h ~ hook,
s the publuhen
will be pleased to hear from anyone who has not been appropr~ately
acknowledged, and to make the colrectlon m f u m e reprints

The publishers and author can accept no legal responsibility for any
consequences arising from the application of information, advice or
instructions given in this publication.

A catalogue record far t h ~ hook

s IS ava~lable
from the Bnt~shL~brary

Edlted by Stephen Haynes

Desxgned by Ian Hunt Deslgn
Cover des~gnby Danny McBr~de
Cover photograph by Anthony Badey, Q GMC Puhl~cat~ons
2002
Set m Gaudy and Tralan

Colour ar~g~nauanby V~scanGraphla (Smgapore)

Prrnted and bound by Kyodo Printing (Smgapore)
 For

Master Woodcarwer
 CONTENTS OF VOLUME 1

Health and safety x 3 HANDLES

Foreword to the first edition xii AIMS
Foreword to the new edition xiii Overview
Acknowledgements xiv Improving bought handles
Shapes and identification
Woods
INTRODUCTION Ferrules
Making handles
Fitting handles
PART I: UNDERSTANDING Removing handles
WOODCARVING TOOLS Finish
Name punches

CARVING-TOOL FAULTS AND THEIR

*
1 TYPES OF WOODCARVING TOOL CORRECTION - d

AIMS AIMS 73
Finding your way around Blades 74
The Sheffield List Shoulders 77
Numerical description Tangs 78
How useful is the Sheffield List? Handles 79
Using the numbering systems
The parts of a woodcarving tool SELECTING AND BUYING WOODCARVING
TOOLS
2 BLADES AIMS 80 P
AIMS Shape and function 80 I'
Quality of steel Straight chisels 81
The different shapes and their uses Straight skew chisels 82 A
Cross section Shortbent chisels 83
Longitudinal section Shortbent comer chisels 83 8
Width Splayed chisels 84
Length V-tools 84
Summary Straight gouges 85
Shoulders Splayed gouges 88
Function Longbent gouges 88
Shoulderless tools Shortbent gouges 89
Correct shape Backbent gouges 89
Tangs Selecting and ordering 90 9
Function Making the choice 90
Types Selecting the tools 91
Correct shape A suggested starting kit 92
 93 Function
93 The set of the bevel
Sharpness versus strength
Bevel angle
97 Flatness
97 Inner and outer bevels
99 Differences in cutting profile
101 The cutting edge
102 Squareness
104 Straightness
Comers
Even thickness
106 The heel
107 In brief
107 The secret of success
107 Summary
109
110 10 EQUIPMENT: GRINDERS
110 AIMS
111 Overview
113 Bench grinders
Types
Speed and fnct~on
PART 11: SHARPENING Belt grinders
WOODCARVING TOOLS Summary
Maklng a low-speed grinder
AIMSOF PARTI1 116 Safety and care of grinders

1 8 WHY CARVING TOOLS MUST BE SHARP

AIMS 120
11EQUIPMENT: OILSTONES AND STROPS
AIMS
Effort 122 Benchstones

I
Control 124 Artificial stones
Appearance 124 Care of oilstones
Safety 125 Natural o~lstones
Enjoyment 126 Sl~pstones
Types
9 PRINCIPLES OF SHARPENING Altering the shape
AIMS 127 Care
Fundamentals 127 Strops
Bevels and cutting angles Makrng a benchstrop

v11
 Care
Slipstrops Setting up
Summary Using waterstones
Pros and cons of waterstones
12 THE PROCESS OF SHARPENING Dlamond stones
Types of dlamond stone
Shaping and sharpening D~amondslrpstones
Cutting profiles Which stones to use
Basic procedures Care and maintenance
Grinding Sett~ngup
Stoning (honing) Usrng dlamond stones
Slipstoning Pros and cons of d~amondstones
Stropping Ceramic stones
Slipstropping Types of ceramic stone
Individual tools in detail Ceramic slipstones
Flat chisels Which stones to use
Skew chisels Care and maintenance
V-tools Using ceramic stones
Bent chisels Pros and cons of ceramic stones
Gouges
U-shaped gouges 14 ELECTRICAL SHARPENING METHODS
Longbent and shortbent gouges AIMS
Backbent gouges Sharpening machines
Tapered tools Safety note
Testing for sharpness Principles of power honing
Maintaining sharpness Speed and its hazards
Stropping Wheel shape and size
Carving technique Direction of rotation
Storage and care Hard and soft wheels
Effect of the wood belng carved Types of honing wheel
Pre-sharpened tools Abrasive 'soap' blocks
The sharpen~ngarea Other considerations
Summary How to use a power sharpener
Achieving the correct shape
13 ALTERNATIVE SHARPENING STONES Summary
AIMS 212
Waterstones 212 Metric conversion table
Types of waterstone 213 Photographic credits
Water slipstones 213 About the author
A starter kit 214 Index
 OUTLIN I VOLUME 2

I: THE WORKSHOP AND 5 THE WORKPLACE '

QUIPMENT Features of a

CCESSORY TOOLS
llets Abrading tools Carpentry toc PART 11: PREPARING TO CARYE
ecialized carving tools Punches
6 UNDERSTANDING WOOD
WER TOOLS AND MACHINERY Growth of a tree Conversion and seasoning '
neral workshop tools and machines Choice of wood Sources Glu~ngup
rtable power carving tools .
7 FINISHES
ODIFYING TOOLS Reasons for finishing Some simple finishes
asic procedures Hardening, tempering and Using colour
nnealing Some examples of modifying tools
8 RESEARCH AND DESIGN -
BOLDING
DEVICES
.
'workbenches Clamps, vices and
carvers' screws
Drawing and sketching Clay rnodell~ni

A GLOSSARY OF WOODCARVZNG TERMS

MEASUREMENTS
Although care has been taken to ensure that the
metric measurements are m e and accurate, they are
only conversions from imperial; they have been
rounded up or down to the nearest whole millimetre,
or to the nearest convenient equivalent in cases
where the imperial measurements themselves are
I -.
HEALTH AND SAFETY
'1.1
..
y-
-
- A . .#t
.
-

I
I

'- .
8' Notes on safety are found throughout this book. They are The carver's environment tends to be dry and contain
gathered together here for reference, with no apology for inflammable wood chips, finishing agents, etc. Never
' '' repetition. No claim is made for completeness, as full, or leave a naked flame unattended. No smoking is the
pxticular, circumstances cannot be accounted for. best advice. If you need to use a source of heat, first
X' .
.
.
- The best safeguard against accidents is mindfulness. It make sure it is safe.
is lack of concentration and forethought that causes most -ii
Bag up and remove dust and debris regularly,

.
. accidents. For example, putting your hand on the edge of a
projecting gouge: what actually caused the accident was
not the gouge, but the attitude that placed it dangerously . especially any rags used for finishing.
Use and store solvents, glues, furpentine, spirit- and
- =u
.X&

=
in the first place. Lack of experience is also important. An
effort should be made to understand and familiarize yoyr-
oil-based stains, as well as all other finishes, in well-
ventilated areas. Keep containers closed when not in . 3,

-
self with all tools and equipment before using them in use, and keep them away from children, heat and &,
I
I earnest. naked flames. ..
-5!
Safety lies in: Make sure that where you walk is free from the danger x:

. - being in control of sharp edges and comers, things to bump into and -7

-
- wires to trip over. See that you can easfly and safely a?a
I 8 - ' ,
being aware of the dangers work around your bench, and that wood chips and
I- ' dust on the floor do not make it slippery.
%
.
I 8 '
= not being distracted z5zi
Sharp tools left clamped in vices with their tangs or -33
not being over-confident
edges exposed, or projecting in the air over the bench,
gaining experience. are dangerous.
-.3
i '
Long hair, etc. should be tied back, and loose clothing %-
.. 1
GENERAL
SAFETYPRECAUTIONS (cuffs and ties) and jewellery (necklaces and rings) W70(
should be kept away from the moving parts of
+
&&
IN THE WORKSHOP machines, and in general out of the sphere of activity.
e J b

I Stand at the entrance to the workplace with a

-
notepad and challenge yourself to think of all the ELECTRIC TOOLS AND EQUIPMENT I _ ~

\
I
ways you could be hurt in the space in front of you,
including the tools and equipment.
Always follow the manufacturer's instructions and
recommendations. - 4
Zoa

L
I
I
Keep a fully stocked first aid box easily accessible.

Remember that there are even more possibilities for

accidents when children and visitors enter the
Familiarize yourself with any tool or piece of
equipment before using it.
Safety guards, rests, etc. should be properly adjusted
,
- ZW

XKm

I -
workplace. and used. ,'
*
q

-
8
All electric wires should be installed, earthed and Keep hands and ihgers well clear of moving parts -
1 covered properly. remember that accidents happen quickly, sometimes

-
r- ?&
.
J 7 - before you have noticed anything wrong. Never reach .-L
b'. , Store and arrange tools and equipment safely, securely over or across machines. 3s
and conveniently.
I .
Double-check eve~ything,including the locking of ;sS
' I
*do
I
!
.

I
A fire alarm and extinguisher should always be
installed.
chucks, the table, or any fence before starting the
*
!rl
IL'
- HEALTH A N D SAFETY

Face or eye protection is always advisable. Grit and

sparks are quite capable of penetrating the eyeball;
chips of wood can fly off; and it is possible for a cutter
or burr to break.
Keep face masks and eye and ear protection easily to
hand - and put them on before using the equipment.
FIX work securely before drilling, power-shaping, and
SO on.
* Keep wiring from machines and electrical hand tools
neatly out of the way, not trailing over the floor or
work surfaces.
Always sharpen, or change, a blade or cutter with the
Take particular care when using the benchstrop,
especially on the forward stroke.
Both hands should be on the c m i n g tool, with the
blade hand resting on the wood. The only exceptions
to this are during mallet work and whpn using specific
one-handed carving techniques.
If using one hand to hold the work and the other to
manrpulate the ch~sel,use the thumb of the work-
holding hand as a pivot or guide to control the cutting
n e v e r cut towards the work-holding hand.

In vigorous mallet work, especially with very hard,

brittle or old and dry woods, eye protection is advisable

- machine isolated - that is, with the plug pulled out. Never try to catch a falling caning tool. Carve in
footwear strong enough to protect the feet from suck
Do not drip water from the cooling jar over motors, , an event.
electrical connections or plugs.
When sanding, use a dust mask; never blow; and
Use a cutter or other accessories for a high-speed shaft
protect your eyes.
at or below its maximum rated speed. Used above the
speed for which it is designed, the cutter could fly There are two other conditions which can agect carvers,
apart, bend or otherwise be damaged. besides the obvious family of accidents:
Never use a bent or damaged cutter or bun; or one
that vibrates or chatters, in a high-speed flexible shaft HAND AND WRIST IlAMAGE
- throw these away Never force or pressure these
Hand and wrist damage caused by thumpmg tool handles
accessories
with the palm of the hand is mentioned in the section on
using mallets (Volume 2, Chapter 1).The damage can be
TIONS FOR permanent, so it is sensible to avoid the risk by using a
mallet instead.

s occur in context in tklis book

REPETITIVE S T M N INJURY
RSI is felt as a burning sensation in the wrist or elbow
ays hold work securely to a stable bench or
joints of those prone to it, possibly accompanied by redness

- Do ilot lay carving tools down with their edges

-
and swelline. It is commonlv known as 'tennis elbow' or
condylitis. The condition is caused by mechanical stress

- projecting, or close to where your hands are working.

Keep your tools sharp and clean. Blunt tools require
more force - shalp ones are less dangerous.
on a tendon attachment, especially through holding or
repeating the same tense position of the joint for long
periods of time. Seek medical advice early; this is impor-
tant for reasons of health insurance.
9 Keep both hands, and all fingers, behind the cutting It can be a slow condition to clear up, and may be

- edge at all times.

Never cut, or exert pressure, towards any part ofthe
body.
incapacitating- in the long.term. On the other hand, there
are forearm snaps which can remove strain from the elbow
and help full recovery. Do not imagine that the problem
has gone, just because you have taken painkillers. Besides
0 A tough glove is recommended when rasps are removing the strain from the joint, you will need to find
being used. A fingerless glove will protect the heels new techniques of working which eliminate, or at least
of the hands when working on wood with rough or reduce, strain. Fortunarely there is plenty of scope for this
:harp edges. in woodcarving.
 FOREWORD TO THE
FIRST EDITION
I first met Chris Pye in 1974, shortly after I had approachability, and a genuine interest in his stu-
moved from London to Sussex. In my newly acquired dents, talented and otherwise. For the amateur, who
rural workshop, sited among blossoming apple trees, for one good reason or another has to go it alonej it
we took stock of one another across a carving bench, can be conceded that with some ability, carving is
and became friends. I was on the verge of possible not too onerous in the initial stage (after all, our
retirement, while Chris was in the early stages of his palaeolithic ancestors did not do too badly carving 4
career, but it has always seemed remarkable how a bone and ivory figurines). But major and minor prob- &q
common interest in woodcarving can quickly bridge
any age gap.
Although having an irrepressible sense of humour,
lems can soon arise, often leading to frustration and
despair. Setbacks tend to occur when the student,
naturally, wants to progress towards more ambitious
3
he struck me as being a thoughtful and studious p$r- work. A p m from the inevitable problems that stem *d
son, an adept carver and with the ability to express from lack of technique, the most serious difficulties, I -K L
*

himself well on craft matters - a rare combination. have found, arise from trying to carve with blunt iikp
Since those days in the early 1970s he has taught tools, or even damaged ones. So it was a most wel-
carving and developed into a designer-craftsman of come and splendid surprise when Chris.sent to me the ' &d
some stature. This has been borne out by the creation outline of his book on carving tools, materials and a
of a very successful carving and woodtuming business whole range of equipment that traditional and mod- sh
in the south-west of England, which thrived despite e m canrers require for their work. zzamn
the recession. Even at the initial stage I was happily aware of mzsm
As a woodcarving instructor myself, over the years a very closely researched and comprehensive source nauer
I have made a point of reading through many craft book, packed with information, and with sketches &
books and periodicals on the subject, but only at and photos galore. I believe that it is a most useful 3hs
intervals did I find something of major interest that work, and can only anticipate that it will be widely % k
a!
I could pass on to students. There seemed to be a read, so increasing student potential, as well as d
certain lack of vital information published, and to obtaining for them the maximum enjoyment that a
some degree it troubled me. truly great craft can offer. S
To be taught by a caring expert is the best possible
way of learning a craft, and Chris Pye is foremost
in this, being blessed with friendliness as well as
Gino Masero
December 1993 -
, b
d a

xii
 FOREWORD TO THE
NEW EI
e mtddle of the twentieth century the craft of but when some new development artses he is will~ng
arving m the Enghsh-speaking world had to employ it, provided it produces the desired result
led, largely because the use of traditional oma- and saves time.
d the making of accurate figure sculpture had We all know people who collect gadgets, every
out of fashlon. It was contnued m a handful of time hoping that the new acquisition will prove the
s satlsfy~nga limited market for architectural carver's panacea, the one maglc tool that wlll effort-
itute ornament, and n those involved in the lessly tum them inm brtlliant carvers. In the real
tlon of cathedrals and other historic butldmgs. world t h ~ does
s not happen. There is no substitute for
like Gtno Masero, who guided Chris Pye, and study through drawing and a sequence of planned
Wheeler, who taught me, were among the exercises supervised by good teachers - tn other
who were willing and able t o pass on thetr skllls 'words, for hard work. However, down the centuries
outs~ders.For the most part, woodcarving became carving tools have evolved, each new shape bemg a
e m of the amateur and the folk carver. Most solution m a carver's problem. Mostly the carvers
amateurs were self-taught, or were insmccted by were aiming to save time, to produce clean work
If-taught. In many cases m thetr teaching and and to be able to carve more sophist~cat~d shapes.
they passed on bad habits and were ignorant By now, the number and variety of tools and anc~llary
methods and standards of the earlter master equipment 1s so bewtldering that a book such as thts
In a book by one such, I once read that oak is tnvaluable both for the novice wondering what is
hard to carve; the writer thereby dtsm~ssed needed to start and for the experienced carver wish-
the woodcarvmg done in medleval Europe, ing to extend his or her range.
p a t work> of omamcnt m d sculpture. T h ~ snew ediuon 1s an enlarged and up-to-date
ommended the use of sandpaper as a remedy version of a book that has already become a most use-
ugh finlsh, even on carvings where the effect ful reference work. It is all-embracmng and accurate In
e to reduce the forms to lifelessness whtle its content, and full of intelligence and good sense.
tng nordinate tlme and effort. It may not be a magic gadget but, used intelligently, it
e &st encountenng the wrltlngs of Chris Pye will set you on the way to carving well.
carving and the carver's tools, I have valued
petted h ~ ideas.
s Like me, he sets the greatest Dick Onians
by the old and well-tned ways uslng hand tools, September 2001
 ACKNOWLEDGEMENTS

no end to those who have influenced me.

and arucles I have read, some long dead but wgose ful to Phyllrs van de Hoek who made lrfe a lot easier
thoughts I have taken as my own. And the carvers by tirelessly photocopying the drawmgs.

the ongmal sheets on wh~chthis book is based. I want

to acknowledge my debt to all these. S ~ n c ethe first edltron appeared, my mentor and

gable Gino Masero, who oversaw my initial attempts scaly lights in the mesh. It's a real pleasure to improve
at sharpening, and wimessed the firsr time I laid a on what he started, and I am sorry he didn't have a
cutting edge into a plece of limewood. His splrlted chance to see this book in c o l o u r he'd have loved it.
friendship was a source of great lay, and I dedrcate thls Many firms have given generous help in updating
book to hrm - an rnadequate gesture of apprecratlon. this book, both by m a h g tools and equrpment avarl-
I In the genesrs of the book Itself I am particularly able and by freely giv~ngadvice and d o m a t i o n In
gratefbl to my editor, Liz Inman, whose encourage- partrcular I thank- Barry and Tony Iles of Ashley Iles
ment and enthusiasm really made the book possible. (Edge Tools) Ltd; Alan Styles of Axmlnster Power
In its preparation I tookup the trme of many people Tool Centre; Geoff and Martrn Brown of Br~Marc
who freely gave me rnfonnatlon, ideas and advrce, Associates; Douglas Ballantyne of Carroll Tools Ltd;
and somet~mesthe tools and equrpment themselves Nick Davidson of Craft Supplles Ltd; Clair Brewer of
to try out. Tony Walker of Robert Sorby Ltd, Brll Bosch Ltd; Brenda KeeIy of Dremel UK; Davrd
xlbrook of Xlgear; John Xranti of Alec Trranti Ltd; Bennet of Falls Run Tools; Hegner UK; Rod Naylor;
Barry Marun of Henry Taylor Tools Ltd; Tony Iles of Dennls Abdy of Henry Taylor Tools Ltd; R~chatd
Ashley Iles (Edge Tools) Ltd; Charles Strrling of Starkre of Stark~e& Stark~e;Mrke Hancock of The
Bristol Desrgn, Peter Peck of Record Tools; and Toolshop; and Wally Wilson of Verrtas Tools Inc.
Glynn Bilson of HTF Tools. I also thank Ray Special thanks to Stephen Haynes for h u sharp
Gonzalez for the rdea of number~nggouge handles to eye and sedulous, but caring, edltmng; Chns Skarbon
ind~catepartlcular clrcle arcs. for his sympathetic photography; and Ian Hunt and
Coming closer to home, I would catch, as it were Danny McBrrde, the book and cover designers.
in a quick gather of the net, some of the many people That loveliest catch just grows more so.

x1v
 INTRODUCTION
he 1980s I wrote a set of handouts on carving There seems to be an assurnptlon that competence m
and sharpen~ngfor students m the adult educa- sharpening and handling tools grows naturally w ~ t h
evening class whlch I was teachmg. I wrote them expenence of carving, but thls is far from the case
1 m a shortcoming I found in woodcm~ngbooks w ~ t hthe majority of beginners. Often they are only
he time. Years later, I st111felt students were mad- able to spend intermittent hours at then craft, and a
aslc informat~onon tools and great deal of frustration - if not despair- arlses in stu-
s why I enlarged these notes dents as a result of then inability to care for, sharpen
ook form. I was very pleased to find that this and use their tools properly, and to work comfortably
was well rece~vedand proved useful to many w ~ t htheir chosen material. This frustration affects
rs, both beginners and those with more expen- the way they carve, as well as the final carvmg itself.
ore years on, I have had a ' There are other consequences too, mcludmng the
sh all t h ~ smater~aland greatly Increased use of sandpaper as an expedient
lt up to date I feel that the majority of what I (rather than for its legitlmate use of abstractly bnng-
remarns as true, pertment and valuable as mng out the gram). Then there IS the growth in sales
,but there have been changes m some specific of pre-sharpened tools and the mcreased marketing of
d~fferentsharpening stones and methods, and electrical sharpening systems, wh~ch,to be usedprop-
e - which I have taken erly, still rely on experience.
portunity to mclude in t h ~ new
s ed~tion. Some of the carvers who have learned from the
itain at least) are mdi- type of books referred to above end up wntlng books
Is carving in the11 leisure tlme, and most will themselves, and repeat a pattern that downgrades
d mmimizes carvmg-tool skills, which are m
books - the apprentice system fact an essent~alfoundation for good
long been unavailable. On carving. It is not that t h ~ skmd of
ole, books about carvlng lnfomation cannot be wr~tten
down, or that there is no
~nformat~on to be had. If
tools ~n a rather the scanty bits about
tory way, as a carving tools, equlp-
ment and sharpenmg
- m hooks, magazines
carvmg some- and manufacturers'
leaflets - are added
up, there seems to be

were m use at d u s nme;

this m itselfgwes the deslgn 7

1
 WOQDCARVINF TOOLS,

p@avrp f@a& -rhe<idamation is superhaial1

fffeomPjBte dB&.outtdue Em@has;ison basics,
Sadem:.e o n t i ~ ~ ~ aaepem l l g wfth badly sharpened
tools, .and awqfkustra&dwith tb<k~work ai@ pr.tr-gr@g,
fim~~&ougb&q%baue l@%'afk&ii ba&-. +' bere g
swkietk$mg r j i j @ i i & gtritt&eor.ap~cgach.dr
This bu.~k$?img.affewtto des.ctlbt,:z,:~n~pkrely
w-pas$ikle,what rools :am. equipme~rareava~kble to

-
@E v i ~ d c ~ epa~iculac~Iy-th~~,~~speei'h~
r-
~?gerhes-wirktbz S&~darnental
,&ern, sh'd~peniag, .. &q,.
to .eiq
skills ,ofcaring.for
and using th6m. to 6. b&b
itarrdmd,. Bx ; c ~ ~ ~ m a on r i ~ g , f&t, I :gm
ae]njdt$te,d#g :a: fmd%ment@lRuth. &out. ~ . o d -
@%@qg$;&~~~s~aad,&a:@a~ipg @in$eparab.le- as 'hwiqd s have been &d ' e ~ x t e m iufthe,egwwk .~
' ~ s ~ p ~ r < l j .hands
~ l i ~ asdmind..
*&~ k d ~They . hamnit dre ca~v,w.'s .visicp>&& &!q&ci
~ihe;$e:,teshniques :md .qpmticha to_ :sharpening
~

wimdcwving tmls rep re sen^ a ,long,tr.adirio0, hut which wiD be. IVing %it-far par&,vIar need,
have b,eea.around ,fora kng time ,mLy be~~mc rhciy filrig @pfi & kxperienee, incteases; and some < i e
wade=lf theg &d ncit, .tb.eyWOdd have b W dtdpPed niatfon- , t kis~ simply~ intended to be interesting,
lan,s ,aEOl m, do@:m,sew, tpiat hey cqmac be :dnlars@gthe genewl patxi1 afknow1edge;ao~;.1~~1&Js
,&t~&x& buf I :fei:1 it 2s a: mistake to ,&~pthem for of m w . Valume. I deals with ,&e~se1&0~
m@ething-,&ess
, ..- , , . effm&- shas~.&ngdwood&ixing &els aq$;ggug@- &$t
:l,havepxesented seve~d.sort.* .of inf~nna,Fi&in I th-& : ~ f w ~ ~ o a d ~ ~ ~Volm~
,.
, @ ~4 i~
s ' ~ @ ~ $
thesfi twov~1xrne.s~ some:pra&f@l~h,f~$&&cl~~.,@$&~@@eflwi@,rhe o@eitooh wed in yqp&ea+ingi
d ~ i a k ~hieh,
; fis. vitally and .i'mgg&~@1_8:; ~ & 1 , , : & . .-.@&-matt&$
,-.. &damen& imp-~ezo
es@eci&rf@& b~5g,M:m; @.mef 3'cB -- ". ....
. d~matTqn &e @ &ri@
.~..~ m~d:&&g :tools :&p hI.spec&cp q ~ o s a ;
~ : ~ 1 v o r : ~ Pand a c ei~3a~cpjs&zies; iself;
~~.
h.isliingi . - , a dhaw to .aPPr-Oa,&'
~ ,,.. ,&. : .
.d,esign aspeat
ev
$.e&*&&i!
.B j&'&&rg3 ~bff.&@Jl&irj. ' bO& . bfe
a
%,
6tefim
. ~ " 5
:$gt4Ej uEsion
. ~*. " ~ - 4eadrilurPom-ofm3,
.*@f@$&g @~'s@~:**@~ >~
, I m d e m ap~o@esFf;Or
+hisS
~~. Gwe:~ w q ?d r:PProaGh 4 about
W;hw,&w&& rs;- tmpr,&ant;
; ' they. ,haye
&A +y&& &E .&,em, 'adulfIm,at~lv
 INTRODUCTION

Each part stans with a set of 'aims' for that part.

of my other books. My aim here is to present tudes and mental states which underlie what we do
concrete information on how, when and are as important as the actions themselves, and it is
oodcarving tools are used, on qualities of guidance on attitudes that I wish to put across, as
d on how these factors relate, to enable much as technical, practical information. As a con-
ne either to start or to improve their carving. skquence, I sincerely hope for nothing more than that
more and more people are taking up wood- this book results in a more satisfying experience of
- and for many of these being in a workshop, woodcarving for the reader - and ultimately, of
ling any tools, is a new experience - I have course, more satisfying carvings.

y \ hood are typical of this caruer. The hair is carved withfluidity, and falls like [iquid
 To show how to assess the quality of a carving tool in order to know
exactly what is being bought

To consider some recent innovations in carving tools

To advise on the care of woodcarving tools

To promote, through understanding, a degree of codidence in the

use of woodcarving tools

T h e wide variety of shapes found among woodcarving tools, and their

By woodcarving tools I mean specifically the many different kinds of chisels and
gouges which are designed expressly for woodcarving; other tools which are com-
monly used by carvers are considered separately in Patt 111. The vast choice of
chisels and gouges is often one of the first things to bewilder a newcomer to carv-
ing - indeed, one manufacturer has the ability to make over 2,000 different shapes
and sizes - and even this range is not complete. A degree of confusion may also
arise in some woodcarvers who, although they have been carving for some time,
started with a few randomly bought tools, and in beginners who have been given
a boxed set of tools and are looking to expand their range. All of these people, and
others, may be unsure as to whether the specific tools they need are available, or
whether a particular tool might meet their requirements. Fortunately there is a sys-
tem for finding what you need (Chapter 1).

W h a t a woodcarving tool consists of, and how it 'works'

It is a cliche that, when someone joins the army, before they can even think of fir-
ing their brand-new rifle, they are made to take it apart - then 'politely' asked to

might at first appear; it establishes a deep familiarity with the weapon at an early
stage, a confidence which may prove life-saving. The key points here are that if
you have an intimate knowledge of the tools on which your skill is based, are thor-
oughly familiar with them, unafraid of them, and even feel free to alter their shape
if you want (see Volume 2, Chapter 3) - all this adds enormously to your confi-
dence as a carver. ~ n through
d confidence comes competence (Chapters 2 and 3).
1
 01, and knowing exactly what is

1 when you see one, and just

are some tools on the market
There are others of excellent
le attention, can be greatly ~mproved-
in how they feel and how they work. There are also perfect tools whtch a
I will almost venerate. We wlll look at factors whmch decide t h (Chapter
~ 4).

the shapes of carving tools relate to their function

only need one or two tools for a certan job, or you may need a small
to start woodcarving seriously. You may be tempted by sets, special offen or
what a particular tool can do will help
nly those that you need, and so avoid end~ngup with tools that are rarely,
,

tions in woodcaming tools

we craft and it is ltttle surprise that the creatlve peo-
workmg, and new tools w ~ t hwhich to do it. Many
rlvare; others become more widely available.
ed ~n tapping the carvrng market, and apply their
to solvlng problems m new and marketable ways. We carvers benefit
these sources of new cools but, when it comes to buymng any tool, tradl-
modem, you need to know what it can do for you - how it can help your
Only tune will sort out the apparently useful from the really useful

care of woodcawing tools

some carvmng tools whtch are well over 100 years old; they have the names
ed on the handles. It is sobering to thlnk that you
ally own a woodcarving tool you only have custody and care of tt.
-

ly it will pass bn to someone else who w~lluse it and, hopefully, also take

on for lookmg after your woodcarvmg tools, they

qulte an investment - of money and tlme - and are a major contr~butor

e in the use of woodcarving tools

d, along w ~ t hthose ln Part I1 on sharpenmng,
and understanding for your woodcarving tools will be established whlch
work and your enjoyment of carvmg - and
full tlme, or just need one tool for a par-

7
 I'ohelp sort. out. ihrawide variery of shapes tli51tire
found arni~il:: woo~lcarvingtools, end dcscril,t: their I

FINDING YOUR WAY

AROUND
If you had wanted a tool for carving wood before the
Industria1 Revolution, yau would have needed a will-
ing blacksm~thto make you one and not lust any
-

smith, bur a rnetalsm~thwirh the fairly specialized

knowledge to make these unusual tonls.
In the past, tools were far more preclous than rhey
appear to us today, boih m terms of what they cost
and their compararlve scarcity (Figs 1.1-1.3). Hav~ng
gone to some trouble and expense tp have tools made,
the~rowners d ~ dnot cons~derthem d~sposahle;they
would be passed down from master to apprentice, or
be kept d i n a family. They were valued as a kev to
eamtng a livtng in a way that 1s not easy for us to
appreciate,. Combin~ngtools w ~ t ha marketable skill,
like carving, ensured a place m what was a harsh
world; a d profic~encym a craft, even if tt would Fig 1.1 Ths expressive Tudor head m Abbey Dore
never make you wealthy, was very Important when Church, Herefordshire, shows the s~mpk,decuiere tool mark
there was little in the way of financial lifelmes. It is of a skzkd work^^ m oak
 1.2 These small
socketed chisels were found
near Cardiff and are now
in & National Museum of
Wales. They took a skilled
Bronze Age smith time and
rouble to make

understanding of what the more recently developed

ones are for. This would probably be true of any
carver from the 4,300 years since the date of one of
the earliest surviving woodcarvings - the so-called
Sheikh-eLBekd, a n Egyptian carving in acacia wood
dating from the Fifth Dynasty (Fig 1.4).The reason is
that the carving and shaping of wood has always
involved, and always will involve, overcoming the
same fundamental problems inherent in the material.
T h e tools used then would still be appropriate today.
T h e proliferation of
written information

executed with a few simple tools recent phenomenon.

Carvers of the past
g to note that the term craft has its roots in would have been
taught by true masters

-me for general work A d others for special

ons. In this way an assorted collection of

entually these tools would be passed on. Such tomb kept this woodcarwing
would have thought they were entering a of a nobleman from
cave, full of priceless treasures, if they could deteriorating, although it
variety, consistency and ready availability of has split from shrinkage.
Made about 2300 BCE,
 TYPES OF W O CIDCARVING TOOL

humbering system, wh~chwill be descr~bedhere, worth having a few of these on file to compare sizes
enable you tDrecognlze qulte easily 'what'swhat' and shapes. Addresses of major manufacturers and
the drverse range of carving took available - suppliers can be found m the adverns~ngpages af
magazines such as Woodcamng.
T ~ I numbering
S system is essentially a shonhand
description of a particular woodcarving tool:
, as we shall see. Some h s may add W e r

e, a firm may 1st a longer 'workman's' or 'pro-

tools for their hobby.

m clusters, one nesttng within another,

the range of shapes IS essentially the same as
ish catalogues whece the skapes are spread
rhe page. Many people fuld the spxead-out

impartant tenn to introduce at this stage is the

whlch refers to the curvature of a gouge when

NUMERICAL
DESCRIPTION
pick up a carvmg tool, look for a number,
sramped on the shank lust beyond the ham
1.8 and 1.9). Associated w ~ t hthis number
e manutacturer's name and/or logo, and
h e place of mmufzcture as well. All

such details on, as do those of repute

qual~tyof atoal: ifthe tool has no stamp

The appearance of any carving tool is a combination
e~therit 1s ~nd~vidually
hand-made or the
of three factors:
not thlnk rt worth acknowledg~ng.
the wdth of the blade;
ot numbered - and it 1s strll not unusual
the shape ofthe blade in cross section;
tools made before the num-
was itroduced.) The number will also the shape of the blade along its length ( t h k
in the manufacturer's catalogue, and rt 1s longitudinal section).
 NG TO THE SHEFFIELD LIST

L* 1%
- ,174 1X
....+
ins

Fig 1.7 This chart shows the cutting-edge profiles of carwing tools,
drawn full aze Placing a gouge, for example, lzghtly over t h appropmte
~
curue wlll eve you both its slze and number Tools U D to 2m (51mm) are
also aumlable Thzs system hns been used m B n m n for at bast 100 years;
Connnental catnlogues tend to stuck the tool profiles, but I haue found
the layoutpresented here the most useful to work with
I
 WOODCARVING TOOLS. MATERIALS & EQUIPMENT -

Fig 1.8 The shanks of a

selecnon of modem tools,
stamped wzth the names
and logos of t h makers, as
well as a tool number

mstead. (The var~ousnames and shapes of cam

tools wrll be looked at in greater detail when we co
ro consider the parts of a woodcarvmg tool
Chapter 2.)
The range of suaighr gouges has equivalents
shape and sue m the ranges of bent gouges. So,
example, the curvature across the blade of a
(13mm) no. 3 straight gouge should be exactly
same as that of a %inno. 12 longbent gouge, a %in n
24 shottbent, and a !41nno. 33 backbent gouge; t
same profile wtll be ava~lablem fishtall and 0th
forms as well (Fig 1-11).
Fig 1.9 I f zmporulnt details are marked on the ferrule or Note that where you mtght - according to th
handle ~mtead,this ~nformanonmay get lost rf the ha& - expect nos. 39-41 to be backbent gouges, t
ever needs replacing numbers actually refer to parttng tools or V-tools.
reason for this is that the deeper shapes of gouge
It is the variation in these three elements that creates not work well as backbent tools, so are not usua
the huge varlety of woodcarvrng tools. made In thls f o m (These polnts are expla~nedmo
The bmic n u m e r ~ a code
l concerns only two of fully m Chapter 5.)
these factors: the cross sectron of the blade and the Bear m mind that you do mt need this list to
shape along rrs length. The width is normally glven camrng - so do not worry about memorlzlng t
separately rn rnches (or fract~onsof an Inch) or md- numbers at the outset. The marn use of the l~sti
Itmetres (Fig 1.10). for reference: ~t has a practical application w
A few manufacturers use higher numbers to desig- selecting and buylng camlng tools.
nate more specialized tools, such as hhtads ( a ser~es There is often more rhan one name for a partlcu
from 50 onwards m the ortginal llst), but nowadays style of carving tool, sometimes several. These
these are often given a prefix number or letter w11l be noted in the text tn the appropriate places.

14
Fig 1.10 These tools dl
speccfy the same Shefild
Lnt number (01) and d~ffer
only in the speaficanon of
the d t h
 WOODCARVING TOOLS. MATERIALS & EQUIPMENT

of manufacturers - if only forthe reason that ddferent Manufacturers don't change theu-specifications tead-
makers have Afferent strengths and weaknesses - ily, and you will be m control of what you have, and
some cross-maker reference rs needed. I suggest you what you may msh to buy.
do what I do: When buying tools overthe counter, you will 6B-3
it helpful to take ~mpressionsof your exkung tools ca
Choose one, actual-sized sweep illustrat~onas
a plece of wood or card to use as a comparrson.
your standard reference -the one in this book is
ideal - and photocopy it.
H~ghlzghtthe sweeps of your tools on t h ~ s USING THE NUMBERING
reference chart; use one copy for stra~ghtgouges,
another for bent, and so on. SYSTEMS
Send for catalogues from all the manufacturers.

Us~ngthese acetate photocopies as ouerlqs, you

can compare the sweeps on your standard
reference w ~ t hthose of other manufactmen and
order accordmgly.
Check the tools when you have received them; changed (Fig 1.12)~
don't settle for anything other than what you
wanted. the wldth
the cross section (or sweep)

16
 TYPES OF WOODCARVING TOOL

following examples show how this mlght work a curve, or may well impel one sweep to do the work
practice, using the Sheffidd List numbermg of another. If you need to keep the same radius of cur-
vature, you can find the tool you want, but under a
different number. Refer to the Sheffield List chat
tool the fight width and shape a h g its (see Fig 1.71, where the profiles of carving tools are
but the sweep (the cross section) is not shown full size.
'CPId.tweyou want
Remember that a degree of hand-forgmg creates some
can move up or down the numbering 'Fern slight differences between individual to&. A good
ease or decrease the amount of curvature. idea, especially for repetiuve work such as mouldings,
is to work out which of your own tools have similar
is the fight width and sweep but the weeps and mark a correspondmg nurnberlng system
on to the handles. More will be s a ~ dabout this later
(see pages 28-9).

THE PARTS OF A
WOODCARVING TOOL
ut is too narrow or not wide enough
Various term are used to descrlbe the dfiirent parts
have to estimate this by trlal and error of woodcarving tools- The following describes a 'qp-
as wllJ be drscussed below, it 1s not just a ical' carvingtool (Fig 1.13).
going to the next width - the curvature The steel blade is fitted to a wooden handle by as
changes as well A carver often knows by tang - it ISnormally quite straightforward to separate
ce which tool is needed to contlnue cuttlng bladcand handle. Sometimes the word blade refers to

I 1
I

17
 WOODCARVING TOGILS. MATEKIALS &EQUIPMENT

Fig 1.14 'Cannel' w n useful term refeving to the znxr and outer faces of any cawing tool
i

the whole of the roo1 except the handle, sometimes concave or lns~desdace of the gouge.) An in-ca
only to the part below the shoulder, depending on gouge (not normally used in carvmng) has its sharpe
the context. ing bevel on the inslde only; an out-cannel gouge

damage to the handle when it is struck with a mallet. bottomed groove. It is also related to the words c
Benyeen the blade proper and the tang may be a and c a d , meaning 'a watercourse'. The root
shaped lump of metal: the shoulder or bolster. Thls these words 1s the Latin canalis, 'a plpe or du
prevents the tang from bemng forced Into the wooden Although these terms are useful, they are more oft
handle and sphtting it. used by toolmakers than carvers
Blades are e~therflat (chisels) or curved in cross The part of the blade nearest the shoulder 1s the
sectlon (gouges) - though carvers often use the term shank; which brings us ro the variousshapes ofblade.
choel loosely to refer to both kids. A flat chmsel has as discussed ih the next chapter.
two bevels and each s~delooks the same, bat a gouge At the workmg end of therool, a bevel dimin~hes
will have a concave surface and a convex one. The the thickness ofthe steel into thccutting edge. There
concave side IS known as the inside, face, hollow, may also be a bevel on the lns~deof the gouge -
channel or mouth of the gouge. The other, convex, other words, there may be an mner and a n ou
surface is the outside, reverse or back. bevel. The comer where the bevel meets the M
The terms in-cannel and out.c+nnel refer to the thlchess of the blade is known as the heel.
rnner and outer faces of any cawing tool wh~chhas In the next chapter we will look in detail at the
them - without specify~ngan actual tool (Frg 1.14). various parts of a woodcarving blade first at the
-

(When used on its own, cannel usually refers to the quality of its steel, then how the parts fit together.

18
 CHAPTER TWO

iniorder,to.how exactly what is being bought

TT"Y OF STEEL

' 19
Fig 2.2 The spark test for
dentifyingsteel of carving-
tool quality

same way to carvers, unless some more versatile way

of working it is developed. Modem methods of sinter-
ing fusing the HSS under pressure into a single
-

shape - may produce tools in the future.

To make a carving tool, a blank of high-carbon
steel b heated in a forge-andshaped on swage blocks,
creating the tang, shoulder, shank and blade. There
are different ways of .doing,this, from crude, mechan-
ical drop forging to the more sensitive, hands-on
hammer forging - which is a highly skilled craft like
smithing, requiring sensitivity and judgement to
shape the blade consistently and correctly (Figs 2.3
and 2.4). Hammer
grain structure withi
superior method, used by the best toolmakers.
After the forging or shaping process, the blade is
subjected to heat tt
hardness and tensil
Only the cutting blade itself, and not necessarily all
of that, is hardened. A greater or lesser part of the
metal towards the handle (including the shank,

gives these parts more resilience. of fumd wmk

20
 BLADES

I
(Fig 2.5), which m some cases may have taken the
cutting edge back into a softer part of the blade. The
steel 1s the same throughout the tool, but the heat
treatment differs: the remaining part of the blade
may have less hard, but more resilient, steel. If you
have any of these shortened tools, and 6nd that they
keep their edges badly, you can resurrect them by re-
tempering. The method is explained in Volume 2,
Chapter 3.
It is not just for the quality of steel alone that
these tools are justifiably prized. The best makers
today still shape and forge their tools in very similar
ways. But you can often see, when you look at an dd~~
carving tool, a considerable difference from some $f
h forgtng and the final shuplng need a h~gh
ot ~ o t the its modem counterpms (Fig 2 6 ) . It 1s as if the older
cc+skill, takrng many years to learn kools used thlnner metal to get the same strength of

C ,ee factors -
structure, and it may be the quality of the steel that
allowed this There is also the matter of lnd~v~dual
care: perhaps more time was taken in the shaping.
Whatever the reason, old tools are generally regarded
tw ing as better formed and finished off than many modem
e b t treatment ones. But this, again, is arguable, for some modem
.i, tools are beautifully made, and some old ones are far
b&$ the quality of a carving-tool blade. They from perfect.
.illBboth its shape and its cutting ability; and The final processes, known as hardening and
baj in any one of these factors can produce a tempering - when the steel is rendered into the
anr
inferior tool.. appropriate hardness for carving- are even more con-
e v e r s love to debate tools: who makes the tentious. Suffice to say l---- *I.-* 7 large tool whi&
01s exhibit what qualities; how the
tempering in each type of tool com-
edge-holding properties of the 'old' versus
and so on. There is no consensus on these
It is worth going a little furrher into this
about what it is in a blade that makes a
t you can make as good, or at least as

nology and research - and the ability to

steel consistently -
e the height of the
el can be consid-
or for this reason alone.
because it is really
that working tools
k,@ols with real working life left in them) have Fig : -he old gouge at the top would mipiwlly have been
rlow to us. As you might expect, these tools ns long as the modem one beneath. The reduction in kngtQ4 ;'
by years of good use represents man3v years of carving and sharpen~ng -
 WOODCARVtWE TOOLS. MATERIXLS a E.QUIFMEW T

whi~htbepwill be.put, e b y a ~ofs the

~. b ~ alsa ~

tiOnswh~& rncw;ih &e ~u'atry~f de

the, fmgw ,$:&e.~a~Lfur&.si muri
Ia=ge%~1gfl~
$~b;i@ ~G@@$@c$& @ &mpd

me a~t* &&~&d13 amardjng .&

, a e d - Qn the: &ep:ha&
~ 1 1be ,thep,e ii
much @X~&GQ~.md C ~ B $ ~ ; S C $ ~ G ~
he.. h--
as , s v be&,
i
;;" 6
~ =&.Jiggt rf@ia&t& @ i ~ gc
~af-~&&& ~ e ' @ ~ g ~ > ~ & fq ~r n go ~ z g ~ ~ f
wdk.m _
be .., ...
... .;.. . 1-: 3 yq':ggo$.~t)$:intt4mjs'$Pq~al,i.cy
bemeen rhe,p~adam:ofdiff&ent ,mmukctu~
wen as:bemeen individmlFaolsw,itb:m anemab
turer'i range.
take, a hea~~pound~ing: ,
from
.
a: mallet --say a lin h th.~~k~r th- w e r e , : ~ ~ o . a ~ & ~ & . g f ~ q g ~ c h
.[&mq). gouge -:=quires- a &[ffere&t:rraatnteilt&.am h e hat $a& a.le$ dipp@gl 'whit& (f&
one &ich ,*& f&&lkat;e, pee,&%,c u ~ g i ' l t nororc
..,,
, . . ,
. .
*ti
s msJ ;g<~ O use&
Y .tgdas-.S
n& to b~ a.li& ii&$blq @ $hs~fbthe
Less :br&t.k,.
s @ e s s ~f iagq~g@lrh~utct&&g: The %ewe s m a to. the 'Bade and a h & fa:the: redue&
.&am~le.of ,&prinoiple is the madiiio~a1mottise thickness iuthe walls that was.mentioned above..
chisel> of.'wrough-t iron.^-&steel welded on for Mu& ef &is disez&Qm,. -&i& zef@@ze ai
&ecu~.ng.edge.~nlyY the&&~ricaib a c k g o d , fnay &e@m cgja&e:mte. ?Ibe
Dieerent sizesand s h p m of toolsneed bb&eatt ~tixgqmWhwe; Wib is S; get- Q,Q Hrh cqmiftg
treated ditferenflvf pot ~ ~ &cause l y ~f chg qs? to $ o a c a j . $ g b t iliSefi&lv 'me,&obs:,& &k
1md us, !&bv 2m I m,.&tj& mhichtare~.&~'best+
quarity c a r ~ ~ ~ t o o l s I W emy..vie*r.
re~s
EIf0acornBafe&eto&m& by.specia.i.&tw.o&.
*al&els, - ,be 6- .&f& bye Lrn
&,ej&a@g& af*&-hg.f*ga&/ .~~-
.ks:me:~;asi!.qj
*
tQ&)8+f~2 mhv:yegs &yep ~ Q j
Tit;fwaeq
--" -

g~e~~pe~.l~@kyge:.,W
.. ,
Qq +e
mgi&w:nifi
&ki.lghete
gme

also f~gIs--aftem,:qPo&ed
~. . , . m salways,i;
L 'but
&iCk xe..nW.Chh P w t h,&<es,&E&d~
.
&exQ looh like,b,qgd.in~Shue b&z&es &6 &e
:

h;ls:@ssmu&:&,&wjfh, p a ~ g ~ & ~ $ @&& A@

.Q@@ m
@I&
@f@ ~~~~u~ @iq$&.&l;re*p
rnd
,.. > g ~ t r$-aew<~c&ag$,+
<
1.t ism
. to Q V @ ~ &Q&W jGaetqrc, in & d i - ~ ~
&t-gpe.dfi:geeI ,and:h e f&&g or ~emp.e&g
'show tlie teqeldrrg OQEOU~S;tbupper one is unifmn1-j bkadi, whhh &kt the ability af a coal %a hold 3s
Jinishedall over, mth the tem@rtvg colours-pkkd out sharpness. k e gf these-factors.are:
Fig 2.9 Tilman R~emmschneidm'smastery of cuthng
technrque is qute breathtaking zn t h detacl from the
limewood Elevat~onof the Magdalene in d;e Bayensches
Nahanalmuseum, Muntch

LOSS OF TEMPER DURING

GRINDING
Heating the blade repeatedly to far more than 'hand-
hot' may also lead to loss of edge-holding ablllty, even
if the metal never reaches the well-known 'blue'
colour whlch ind~catesoverheating and loss of hard-
ness. Great care must be taken not to allow the blade
to heat up significantly dur~nggnnd~ng(Fig 2.10).

Fig 2.10 A 1920s hrmd-manked, watm-cooled gnndzng

wheel mcght be slower than nmodemprinder, but wo&
newer overheat the blode
 WOODCARVING TOOLS. ATERIALS & EQUIPMENT

what you have bought. Avo~dboxed sets (see

THESUBTLE' EFFECT OFSOME
page 91).
MODERN GRINDING WHEELS
ON THE CRYSTAL STRUCTURE
In this way you can be fa~rlysure of getting tools that
OF THE EDGE
are rhe best currently available - made from the b-
Mmute cracks and striations may appex insome sorts quality steel, usrng the best possible techn~ques.
of steel from the hmgh-speed Impact of the abrasive
grrt, so maklng the edge more liable to decay. Thrs is
more l~kely to happen with a coarser stone. Alwaystin- THE DIFFERENT SHAPES
ish offgrinding on the finest wheel, and leave enough
metal for hand-workrng beyond any effect of the AND THEIRUSES
gnndmg. (Grinding is considered m detall in Part 11.)
Now let us look at how the blade can be shaped, m its
In my experience there LS l~ttled ~ e r e n c em the steel cross section, longmtudinal section and w~dth,for di6
and edge-keeping qualities of most old and new tyols ferent apphcations.
- and I have in use a range of several hundred tools,
old and new, but all from the best-quality rnanufac- CROSSSECTION
turers. lnd~vidualtools of all ages and makes seem to
vary In their edge-holdingproperties because so much Woodcarving blades have only a dozen or so d~fferem
depends on variations in steel, tempermg and the cross-sectronal profiles, although there may appear
treatment of a tool m the processes of carving and more to a begrnner. Even these dozen or so s h a p
gr~ndi~g. When it comes to the forgmg or shaprng of reduce to three basic varletres:
tools, however, there does seem to be more of a dif-
strarght
ference between old and new. So, to help you buy the
best tools, here LS some summary adv~ce: curved
Never buy to.ols just because they are cheap, and
angled.
definitely not from dublous sources.
Always buy from finns with a long-standing good It 1s when these profiles are multipl~edby the possmble
reputation to protect, who label therr tools, are vanattons along the length and the width that we
~ustrfiablyproud of what they make, and can arrive at the huge numbers of d~fferenttypes that are
supply catalogues and other mnformation. actually available.
The cross sectlon of the blade is seen by l o o k i
When you are begmnnmg, buy your good-quality end-on at the edge of the tooL
tools from a few d~fferentsources and compare
them yourself. Do not commlt yourself to buying STRAIGHT BLADES
too many tools of the same make at thms stage - Tools with blades which are straight across the width
you might eventually be unhappy with them. are called chisels.
If rn doubt, ask a few carvers which tools they use I n normal woodworkmg, the ch~selis a very com-
mon tool, having a bevel on one side of the cutting
frequently and what they thmnk of them. Bear mn
edge and a flat face on the other. Woodcarving chlsels
mrnd we are all biased to some extent.
differ from those used m carpentry by havlng a bevel
Buy the best tools that you can afford and do not on both sides (Fig 2.11). The reason for this is
stlnt on qual~ty.It IS better to buy a few good expla~nedin Chapter 9 (page 137); the carpentry
tools than more of lower quality. Tools are meant chisel is used mostly for d~fferentpurposes, although
to last a hfetime, and you do not want to regret it is usual for carvers to have a few.
 huhr for :he
mo&me& is a
ftr.mer er h e r :cb'ise1

on one side med &-

oa~penjezsawd o&ezs.
This term .was Si& 'Flgz.1.c m~&ky&,,,q&g@. &p &csmtqfdlj:m a
.-
bar of ~ . & & ~ & ~ ~ k n m i n pprodam t o a w.arki~18
edge, Theearlis d i s k nuey well have &t.th~'&gidharz
p@hgpsb o d in.&,w,. . ns~'&t~1,t~1,hrmdlo,
so&ts:or ta& being
&&;&@,qng

p ~ u t a & l y tolirrected \aith .&,e W&S ~ f r&.

:
( , A c e o ~ dto, ~othw
~ sources, fern& -ir; a .V&&IT .i$
f m ~ i ~ , .'shaped;) . m ~ &&II& Gome
fram& i Em=.& ciyeau, .%I$& . d a ~:a~%fa'&e
s vjirh
@milei edges &a 8 de&itr bea,eI.Of,&ctwro:strapwJ
,h&longsiby t,*sd &,&gee
- ,. by.
. we=,-is by far
the ~l.&:(@g.2;la;)*
The.ordinary .woudc%r@i$i c h r l i s .deQg<
nae&na.,1in &e &iffr91$ listkrg:
Whgnthe wning eqge of h d is is€ an&
-. tp the long .a& he-tool ,b. :miTed :a skew ahisel
(skewed cGse~),'),'sk~~~ m corner elisel (Rg:2,15.).

dd fimer chisel with asocketed rather than Fig 2.15 The basic skew c h ~ e lthe
; tip of thzs one has been
,tapering straight to the edge ground as described on cage 148 (see Fig 9 42)
 WOODCARVING TOOLS MATERIALS & EQUIPMENT

like depends both on the radius of the clrcle and on

the extent of the sweep - that IS,what pomon of the
circumference of the trrcle it com$rises. Sweeps range
from verv flat (no.. 3 m rhe Sheffield List), which is

I
almost, but definitely not, a chisel (F~gs2.18 and
2.19), to a m e semicircle (usually no. 9); Fig 2.20
shows only a selecr~onfrom the complete range,

. ,2.16 The useful skew can be turned over to get mto

corners from both d~recnons

A sna~ghtverslon of this tool, as opposed to the bent

varieties, is a no. 2 in the Sheffield List. Like the
firmer ch~sel,it has a bevel on both sides and can be
used e~therside up, w ~ t hthe cuttlng edge facing left
or right (Fig 2 16).

CURVED BLADES
When the cutnng edge of the blade 1s curved m cross Fig 2.18 The flattest gouge (right), seen from above, IS
sectlon to a greater or lesser degree, the tool 1s almost zndistinguishabk from the m l y f i t ch~sel

r
referred to as a gouge.
The curvature usually forms an arc of a circle, m
whlch case it is known as the sweep of the blade ( F I ~
2.17). What the curvature of a particular gouge looks

\
Fig 2.17 A sweep is, by
defininon, an arc - a
porhon of the
czrmference of a arck

/ ,' Fig 2.19 T ~flattest

E gouge (right) and a chisel (left),
seen end-on. From this angle it is clear that the so-called ' f i t
gouge' is actually signifcantly curved
 BLADES

Fig 2.20 A selection of

sweeps ranpgfrom the
fiat to the semicircular

Fig 2.21 Only gouges

. .
src of a arcle can rock 41
.orate through their cut.
This slicing action, in eithe~
direction, is a primary
carwing technique

tage of a circular arc is that the tool can

-
or rotated shghtlv' as r t 1s uushed forward. - -
hg sfic~ng
- actlon wh~chsevers the wood much iotared into Part of the 1/11
ly than if the tool were merely dr~ven hollow between
ead (Fig 2.21). The no. 9 is the last sweep acanthus leaves,
that can be rocked through its cut The forming the

k representatives - approximately %m (3mm)

-are sometimes known as eye tools; they can
m form the eyes where some types of acan-
d~shnchwe'eye'

+meet ( F I 2.22).
~
 uu
11

10

(0.9 -

-
~ -~- -~ - - - - -

Fig 2.23 From a semicircle, the walls of the higher-numbered gouges extend tn fmU-shapedprofiks

I
The next gouges i n the series (nos. 10 and 11) take
on more of a U-shape, the side walls elongating, and
the mouth deepening, with no. 11having the deepest
walls (Figs 2.23 and 2.24).
I /To go over this numbering system for straight-
I
I
bladed gouges once more: the flattest gouges are no. 3,
I the semicircular ones are no. 9, and there is a deeo-
enlng range of sweeps m between. There are two
U-shaped gouges (nos. 10 and 11) with curves based
on semic~rclesand straight, elongated s ~ d ewalls.
This nomenclature 1s nor always as neatly defined
as stated here, and some drfferences occur between
makers. For example, a firm may make fewer d~visions
m the range, ot may make no 10 the m e semicircle
and only have no. 11as the U-shape. Remember also,
when comparing them wlth the manufacturers' charts Fig 2.24 A selecnon of deep or 'qu~ck'gouges, from a
of 'Ideal' shapes, that these tools include a degree of sem~c~rcko n the left to the deeper U-shaped tool on the n&

It IS worth mentlonlng also that the side walls of other words, that smaller or narrower gouges are seg-
U-gouges may be elther vert~calor splayed outwards ments of the larger ones. So no. 6 gouges, whether
sllghtly - or, for that matter, gently curved rather %m(6mm), Xm (ljrnm), %m(19mm) or lin (25mm)
than stra~ghtThls can make qulte a difference to w~de,might be assumed to have an increasingly wrde
then behaviour: a tool w ~ t hvertical s ~ d walls
e makes segment of the same-rad~usclrcle. This is not true.
consistent, narrow, parallel-s~ded channels, but is If you were to jorn the ends of the cuts made by
harder to use because the chip is lrable to stick in the pushmg, say, ddferent-sized no. 6 gouges Into a flac
cannel - and harder to sharpen. wooden surface, the result~ngcurve would be a spiral,
The prlnc~ple1s that the curves progress from flat not a circle (Fig 2.25). This shows that the gouges of
to strongly curved, and are numbered accordmgly. It any des~gnationkeep a proportionate depth as ther
is a common mistake (and one appeanng m many decrease m width. T h ~ ISs true of both Sheffield and
publ~cations)to assume that when each sweep of Contrnental systems. How the geometry was first
gouge 1s given a number, thls number applies to decided appears to be lost, along wlth the or~glnal
gouges that take t h e ~ rcurvature from a part~cular patterns, in the mists of tlme. The trad~t~onal sweeps
diameter of clrcle, no matter what the w ~ d t h- m are perpetuated because, when the swage blocks that

28
 dlowed to follow its own cut (Figs 2.26 and 2.27); this
principle is of fundamental importance in certain
types of carving.
By stamping the edges of your gouges into a piece
of card or tracing paper (or a thin piece of wood), it
is possible to find which widths and numbers of
gouges will join up in the same circle. Do try this
yourself; it is quite instmctive. A second numbering
system of your own, using perhaps Roman numerals
or letters, can then be added to the handles. This may
be important for repetitive or standardized work such
as carved mouldings. For most work, however, carvers
come to know which chisel cuts which curve, and will
I f the sweeps of different-sized tools with the same manipulate a gouge to fit a particular cut if exactly the
re joined side by side, the result is a spiral, not a right one is not to hand. (This technique is described
though the sweep of each individual tool will I in my Lettercarving in Wood, page 74.)
circle A gouge which is so gently curved as to be almost
flat is termed exactly that - a flat gouge. (If it were
to form the profiles wear out, a new one can truly flat, of course, it would be a chisel.) A gouge with
using a tool as a pattern; the original infor- a pronounced sweep is called a quick gouge. Carvers
is never needed. Perhaps the curves were talk about 'flatter' or 'quicker' gouges as the curvature
1 progressive Archimedian spirals, and not varies one way or the other. As the curvature in-
t all. However, remember that every gouge - creases, the gouge is said to become quicker. There
n the U-shaped ones - will cut a true circle if may an interesting relationship with the phrase

Any gouge w ~ t ha ctrcular sweep wlll cut a cirl Fig 2.27 U-shaped gouges are obuiotctly not abk to do this
mespondzng to 16own rad1u.s k%mei4JWr*&&d &s
 WOODCARVING TOOLS, MATERIALS & EQULPMENT

'the qutck and the dead'.

sense, more 'allve'; m the
a qulck gouge can rem
more vigorously than a flat gouge.
The nos. 9, 10 and
based on sem~clrcles,do nor dtffer from one another down to shape reeds in some decorative work or vemns
In quickness of curvature for any given width: the in fol~age.A flute 1s a decorative channel cut mto a
wrath of the tool IS the dlameter of one particular surface, and can be easily formed w ~ t hthese deep or
semtclrcle. These gauges are often, but somettmes U-shaped gouges (Figs 2.28 and 2.29).

Fig 2.28 A wetnmng tool I

(no 9 ) can be used upsde* ,
down to shape the uemns In, i
for example, folmge,
fluters, the same shape
somewhat larger, can be 1 ,\
used to cut channels, or : - I
inve~tedto make reeds (sea
next figure) U-shaped
gouges (nos 10 and I I )
are not used uestde do

Fig 2.29 Flutes an

t
gouges whlch are deeper than a semicircle are
lcalled U-shaped gouges or U-tools to differen-
&em from the regular gouges whlch can be
d to glve a sllcxng cut. The extended walls of
auges prevent spckmng.
BLADES

The angle formed between the two sides can be more,

or less, acute: the three commonest angles are nomi-
nally 45O, 60° and 90" (Figs 2.31 and 2.32), but these
may vary considerably ih practlce - so much so that
the narrowest shape is occasionally referred to as 30°
ratherthan 45". The angle is chosen according to the
DES work for which the parting tool is needed. If you have
rihe most common of the anguIar cross sections to choose only one type, the 60' angle is probably the
khape. It is helpful to see this tool as two chisels most useful being the mehum shape.
by one edge; for obvious reasons it 1s The junct~onin the bevel between the two faces
or V-chisel (Fig 2.30). of the parting tool is called the keel and, l k e the keel
nmon name for this shape 1s parting of a boat, it has a guidmg function (Fig 2.33). In
nong other thngs it is used to separate effect the V-tool has three bewek: two for the chisels
rrea of carnlng - from another. This is that form the sides, plus the keel where the two s ~ d e
4 y seen in shallow relief carving, where the bevels meet. Grasping this poznt 1s vztal when 1t comes to
is kl~eved'from its background. h r p e n ~ n gthe V.

---I Eig 2.32 1he same slze of V-tool is awalabk in three

d + m t anhi: uppronimaly 45O, 40" and 90" (left
7% baslc V-tool or parting tool to nght)

.ions are awailable for dzffwentpurp

 -

WOODCARVING TOOLS. MATERIALS & E Q U I P M E N T

Fig 2.33 The parts of a

V-tool or Darting tool

Xuu, m.ay came: across other, more unusual, tools designed by the founder of the tool iers Alec
which have an angled cross section of some sort (Fig Tiranti Ltd.
2.34). These were originally developed for particular These angled tools include the followirig:
work in the fumiture trade, such as cleaning between
the elements of a relief design. They are little used in The macaroni
general carving; most of their work, if not all, can be This is equivalent to three chisels joined together,
done with other tools, and they are nearly redundant with two right angles in between (Fig 2.35). It is
these days. If you are just starting carving, in particu- sometimes called a trench or trenching tool, and is a
lar, these tools should not really be considered. bit like half of a rectangle. It will cut a vertical wall.to
However, they are worth knowing about. Their names both the left and the right sides.
are rather fanciful, and it is not hard to imagine some
Italian carvers - many of whom found their way to The fluteroni
the East End of London in the heyday of fumiture This is a sort of softened-off macaroni with rounded
carving - having a private joke over their pasta one comers. The sides are still straight, but leaning out
day which somehow caught on. Some may have been a little.

Fig -.-. .les the

V-&ol, there are other, far
common tools which
zngled in cross section -

32
 ig 2.35 Shortbent,
,rshta~land strazght
macaroni tools

The splayrng or tapenng starts either dlrectly

eronl with the central sectlon cumng from the shoulder of the blade, or beg~nsafter some
rds. It is normally made with a bent length of narrow shank. The shank can m some cases
could also be described as a backbent be quite long, wlth the blade a mere appendage,
the edgesrurned up. It is a very specialized fanning out at the end. The tapered tools have thar
ed for the furniture trade. own names, depending on the variable ratio of taper
to shank.

med, and IS the equivalent oftwo shal- Straight,parallel-sided gouges or chisels

ge to edge, rather than the two chrsels These (Fig 2.36) are by far the most common and
the ordinaryv-tool. This tool is used to useful woodcarving tools, although a few spec~allst
etween two beads, shaping the beads carvers may have more of orher types. In terms of the
t ihe same nme. (A bead or reed IS a
mould~ng,the opposite of a flute or
bead is also used for a short segment

red the var~ousshapes of woodcanring

g across the blades, let us now turn to

DINAL SECTION
e e~therstraight or bent between the
e cuttmg edge, wlth several varianons.

these tools may be parallel along their

splay outwards from the handle. Fig 2-36 The swdght chisel d y has flat facer. The
an attempted innovation, but I
find 1% m o t h comtrs make it less easy to gnp

33
 81

en the allongee and the fishtail proper can

variable lengths of shank or taper somewhere
iddle (Fig 2.41). Old books often refer to
dle tapers as long-, medium- or short-
or, collectively, as spade tools or spade
ere the word pod may come from
meaning 'foot' or 'leg', with reference to
ent shank. Bear in mind that shank
a [ e x o r at least part of it.

ring buying any of these splayed tools,

bear in mind that a fishtail to one
ay be a spade tool to another. You

The busic fi ; h a p today is more of a

heck this detail against catalogue i a-

tions, and not assume that all manufacturers use the
same names for the same shapes.
The actual blade sweeps normally correspond to
those of the other straight gouges, and the tool num-
bering reflects this fact. With most manufacturers the
last digit (or two digits) of the listing are the same for
all straight blades with the same sweep, regardless of
the different longitudinal shapes. In this way, if you
like the sweep and size of a particular parallel gouge,
but would like it as a fishtail, you should be able to get
The allongee shape this version of the tool using the numbering system.

I , '
vel, which m y be indi~tin~uishabk .
35
 WOODCARVING TOOLS. MATERIALS & EQUIPMENT

Fig 2.41 A range of

tapcred gouges, from spud
to fihtcul, nomenclature
uaries between
manufacturers You need
to &ct& what you want
to acluewe, and ak whzch
shape opt001 wrll do zr
for you

Chisels, as well as gouges, may also be allongee, spade The short bend, in turn, can bend m opposlte dire
or fishtail w ~ t ha long shank.

BENT TOOLS towards the front fxsc a frontbent

The bend 1s seen by looking at the slde of the blade:
it wlll curve first one way and then the other. The towards the back iirst: a backbent.
bend itself can start fzom one of two places (Fig 2.42):
Let us look at these various bent tools in more det
It can start from the shoulder of the tool, as a
long, continuous, snake-llke bend: the longbent
Longbent tools
tool.
It can start much further away, towards the
working edge, after a str
a shosr, crank-like bend: the shortbent tool. (Figs 2.44 and 2.45). The curvature is long

Bend star% here

Shortbent tool

Fig 2.42 Longbent and

shortbent carvmng tools
7

I BLADES

elegant, and enables the carver to get into a shallow Shortbent tools
recess without the handle fouling the wood. Some Again there are various names: shortbent, shallow-
ranges of 'microtools' (see pages 10+5) include a bent, frontbent and spoon or spoonbit gouges (Figs
longbent chisel, but these are not available in the 2.46 and 2.47). Sometimes the simple term 'bent
standard ranges. gouge' is used; this usually implies the type with the
short bend to the front, but this is not necessarily the
case. The term is best avoided and replaced with
something a little more precise.
Shortbent tools include fishtail chisels or skew
chisels with a long shank, as well as gouges.

Frontbent gouge

Fig 2.45 Tne amount of lengthwise curvature in longbent

Fig 2.43 The crank of afrontbent gouge ncwes in the gouges varies between manufmurers. Some have so little
opposite direction to rhat of a backbent gouge curve as to be little improvement on the straight gouge

Fig 2.46 Pam of a

shortbent (frontbent or
spoonbit) gouge
 W O O D C A R V I N G TOOLS. LATERIALS 6 E Q U I P M E N T

Fig 2.49 Shortbent skew ckuek come inpars, left- and

r i g h t - M , tn suit different grrun cnndinmu
Fig 2.47 E m c jhntbent or shortbent gouge
batches of tools coming from one manufacturer.
The shortbent ch~sels(Fig 2.48) and flattest godges Sometimes there seems to be so little curve on the
are sometimes called grounding teals or grounders, tool that it behes the description 'bent', and gives
because they are used to w o ~ kthe backgrounds of negllglble advantage over the stra~ghttools (Fig
relief carvmg. I have always found the flattest short- 2.52). So you need to be a little wary here, especially
bent gouges a better optlon than the ch~sels;it 1s d you are ordering unseen tools through the posr. Try
much easler to prevent the11 comers digging m to examme photographs or drawings of what you
A shortbent ske* chisel can have the cutting hope you are getting, and do not accept a tool wtth
edge skewed to face the left or nght; these are usefully a curve that, m effect, does not do the work it 1s
bought m pairs (Fig 2.49). V.tools and macaronl tools meant for.
can also behad m a shortbent form (Fig 2.50; see also Shottbent gouges w ~ t hthe greatest change of cur-
Fig 2.35). vature in the bend are referred to as knuckle gouges.
The right bend allows the carver to get into These are usoful for entermg very t ~ g h trecesses
recesses whlch are deeper than those accessed by the and hollows, such as those found m Goth~ccamng
longbent tools - the crank-like shape keeps the handIe (Fig 2.53). Unfortunately they are rarely ava~lable,
even &her out of the way (Fig 2.51). However, .the either new or second-hand, but they can be made to
amount of bend that any manufacturer gives to both specla1 order by a firm such as Henry Taylor, or you
shortbenr and longbent tools varies cons~derably- can make your own usmg the techniques described
not only bktween manufacturers, but even between m Volume 2, Chapter 3.

L
Fig 2.48 Shortbent. ..
 BLADES

Ft 2.51 The shank of the frontbent gouge is normally

rectdngular, facilitating &. The clrcuiar shape look s l i c k
ktT find that 1 can gnp it less firmly. This sort of personal
w o n is why it is best to try tools in your own hands first, Fig 2.53 The knuckle gouge is a tightly nrmked frontbent
&r than depend on the catalogue,photogiaehs gouge which gets into deep recesses more easily
 WOODCARVlNG TOOLS. MATERIALS 6 EQUIPMENT

Sometimes, but fortunately not often, a very awkward

job requires such a bend that a special tool has to be
made -perhaps with so much of a bend that the edge
oithe tool is actually facing back towards the handle.
This is not too difficult a procedure, and Chapter 3 of
d Curved gouge

Volume 2 gives you enough working details to tackle

this problem. It is simplest to start with a tool which
already has the sweep and width you want, so you
need only alter the lengthwise bend.

Backbent tools
These are similar to shortbent gouges, but the curve
is made in the opposite way. The odd-looking tool so
produced comes into its own when carving a bead or
other convex surface which curves concavely along
its length - such as when a reed travels into a hollAw Fig 2.54 Backbent gouges will deal with conwex profik
or recess (Fig 2.54). which in turn curwe into recesses
To put this another way, a convex surface (such
as a reed) can be formed by turning an ordinary
straight gouge upside down. Sometimes, though,
when working that shape into a hollow, the handle of
this straight gouge can get in the way. Cranking the
handle back keeps it clear of the wood: this is the
backbent gouge (Figs 2.55 and 2.56).
It may sound like a very specialized tool, but I find
myself using it quite a lot. It is useful for many sur-
faces which are concave in one direction and convex
in the other; such surfaces constantly occur in natural
forms. To anticipate a subject which is covered more Fi_ backbent gouge

Fig 2.56 Some home-

made backbent gouges, two
with the handle cranked
back further for a more
spec~akzedpurpose
 BL

JjT
Dogleg chlsei I
I

L
I
I I

J
I
Foot ch~sel I
1
I

1Fi 2.57 Some speaalned chsel shapes ,=,* - - --

. 8, 8 8- -
'1 Wy m Part I1 (pages 13640), sharpening your
:straight gouges w ~ t han inner bevel reduces the need
WIDTH
1For backbents. All woodcarvmg tools are available m a large range of
widths (Fig 2.58). It is the workmg edge that 1s taken
IGenerally speakmg, all bent gouges can be obtained Into account when measurmg the width.
# Iin the same varlety of sweeps as the straight Eouges.
- -

However, the deepest gouges (no. 11,a n d also no. 10

i f h s is a Uashape rather than a semicircle) are not
mailable in the backbent form as they do 1
mot really work ups~dedown. For the same reason,
the V,tool 1s also unavailable in a backbent form.
As with the tapered tools, some manufacturers may
1prefix the sweep number wlth another to spec~fvthe
n type of bend.
I
Dogleg tools
'The dogleg chisel has two nearly 90" bends m its
&tank, towards the workmg end (Fig 2.57). It is used,
B e its counterpart the knuckle gouge, to get lnto
very t l-~ h trecesses, or when undercutting.- A foot
Ichisel is a more sharply angled verslon of the dogleg. ., -._..-A -- , ..xk unth mostly large or
Aside chisel has an L-shaped shank; agam, it can get mostly small tools, depending an the type of work they
1into odd comers not reached by other shapes. prefer, or specialtze m

41
 WOODCARVING TOOLS, ATERIALS & EQUIPMENT

Chisels (straight, tapered or bent): the width is

measured at right angles across the cuttlng edge.
A skew chisel is measured across the maximum
width of the blade, as if it had an edge at rlght
angles -presumably because the length of the
cuttmg edge depends on the angle at which it is
ground (Fig 2.59).
Gouges or parrlng tools (stra~ght,tapered or
bent): the width is measured as a strarght lrne
across the wldest part of the mouth, at the very
edge. The wrll be from corner to corner, at right
angles to the long axis (Fig2.60).

Brrttsh manubcturers usually give the width both m

impertal measurements (mches) and m approximate
metrlc equ~valents(millimetres), but most Earopean
tools use only metrlc. There is a conversion table at
Fig 2.60 Wzth the excephon of skew clusels, it IS I .. .
the end of t h ~ volume.
s
cumng edge wluch zs measured, fiom comer to comer
Widths start from very small, dellcate tools of %sin
(1.5mm), or occas~onallyless, and range up to large
brutes of 21n (50mm) or more, used for sculpture (Fig
2.61). What widths are actually avarlable varies
between manufacturers - no one makes all the tools

Fig 2.61 Wdth mcrements, between the smallest and

largest for each type of carvmg tool, help to account for the
e n m o w numbers that are auamlable

that could possibly be made. Most makers stock a

widevariety of the most commonly used tools, having
made, on economic grounds, some selection of sizes
Fig 2.59 Skew chzsels come m a range of widths A to offer the public. You may have to look around if
newcomer should start w ~ t hsometh~ngm
n the m~ddle(say you need an exact specification for a particular pur-
X~n/lOmm)and buy drfferent sizes only when they are pose. Some manufacnrrers will consider producing a
actwlly needed - wh~chm~ghtbe never tool to your special requirements.
 woodcuts, then the larger tools, of sufficient slze to
allow the free use of both hands, are what you need.
There are cheap sets of 'carvmg' tools around
whch are very small and look like the n ~ b of
s old dlp-
pmg pens. They are made of soft metal and are meant
for cutting soft linoleum and the llke. They are not
you may expect the blade of a Xm (13mm) suitable for carving wood and should be avoided.
to be around 4-51n (100-125mm) from the
der to the edge. Thls IS useful when you come
an old tool and are trying to work out how
h has been worn away.
I have described m rhii section, m some
detall, the sorts of tools that are available, and
the vanous terms you may come across.
Gouges come in a series of curves or
sweeps, rangmg from very flat to very
a1 carvlng tools are always held m both hands. 'quick' or deep.
This range of gouges can either be stra~ght,
or bent in various ways along the length of
Fig 2.62 Two brand-new
the blade.
The stra~ghtgouges can have parallel sldes,
dtference m length n about or sides which taper out from the shank or
handle, splaying to varylng degrees.
The bent gouges can be bent along the
whole length of the blade (longbent), or
just at the far end away from the handle
(shortbe~d,

r & msr o~~eek,:c&be:genedUy small@

Fig 2.63 Such mushroom
or large%and can be obtained in a large
handles are for woodblock
variety of widrhs.
makers' gouges or wood
When you buy a tool you will need to know:
what sort of sweep or curve you want
whether, and in what way, you want the
tool bent or tapered
how wide you want the tool to be
 WOODCARVING TOOLS, MATERIALS & EQUIPMENT

Chaprer 5, on selecting and buying tools, explains - even unwittingly - heavy, especially on the larger
farther how the shapes of these tools relate to their sculpture tools. The shoulder workis with the fermle
function, and mcludes a drscussion of orher consider- to stop the sharp tang forcing itsgvay into the wood
atim whch need to be taken Into accounr before of the handle. &torically the shoulder predates the
buying any tools (see pages 80-96). ferrule, because makmg metal tubes was
not easy.
Some carvers and manufacturers Lnsert a hard
SHOULDERS leather or mbber washer between the shouIder and
the handle to smooth &us transmission of energy
(Fig 2.65), but t h s is not actually necessary with a
FUNCTION properly fitting shoulder.

The shoulder of a woodcarving tool, sometimes

referred to as the bolster or stop, is the protuberance
in the shank of the blade where the tang penetrates
the handle. The word bolster seems to be used hdre
In the same way we use rhe word elsewhere, meamng
'a cushion or pad'.
The flatness of the shoulder, as it meets the wood,
prevenm the tang being drrven further into the handle
and splitt~ngit. The shoulder is, rn effect, a sort of
jomnt. It i s particularIy important when a carving tool,
such as a large gouge, is struck with a mallet: the
impact of a blow on the handle arrives at, and is
taken almost entirely by, the shoulder (Fig 2.64). The
force pushes on Into the blade itself. The tang is not Fig 2-65

44
F BLADES

Fig 2.66 TyplcaUy,

shouldprless took are
hghtwerght and are used fov
fn~shrngand dehcate work

E g 2.67 Tk flat end w

the tang ofa shoulderless
tool (z~ght)acts m a
similar way to 4 shoulder,
~nhibitingthe split tin^ of
the handk
.-

y only necessary, as is the fermle, when there is a

ger of splitt~ngthe handle Light tools, wh~chare
worked fairly delicately by hand, do not need the
d protection of the shoulder and ferrule as the
ures on them are small (Fig 2.66). However, one
Important feature of these shoulderless tools is
the end of the tang is squared off - this helps

ever, avoid the dangers of overusmg t h ~ stech-

tools, as thls can lead to splitting the handle, d

end~ngthe tool or breaklng its edge.

45
 W O O D C A R V I N G TOOLS. MATERIALS 6 E W I P M E N T

more care over the forming of the shoulders, and the

CORRECTSHAPE tool as a whole, than do others (Figs 2.69 and 2.70).
The shoulder is formed quite early M when the ,tool The main features of a correctly shaped shoulder
are as follows:
.
is made, and it seems that the forming is often hurried
in the rush to get on with making the blade itself.
The metal in with he handle
A look at a broad range of carving tools will ve~lfi- should be (Fig 2.71),It is not uncommon to
this the shoulders come in all shapes and sizes
-
have handles without f e d s , relying entirely on
(Fig 2.68). They may be too large and overhang the the flatness of the shoulder to prevent the wood
ferrule; sometimes they are ridiculously small and splitring..
only the ferrule prevenrs them pushing, cone-like,
into the woodi sometimes they are badly offset to one The metal of the shoulder should be disuibuted
side. But, to be fair, some manufacmers take a lot equally, and evenly, around the shank.

b
:ea
.*

I
Fig 2.68 Dtfferent manufacturers shape the shoulders of them tools m d~ferentways, some d z n g
more care dun others
 BI

The shoulder size should relate to the size of the

tool - larger tools needing appropriately larger
shoulders. The shoulder should not overhang the
ferrule - although this latter point can have as
much to do with the handle being too s%$s
the shoulder being too large.

I A beadfully forged ~Mlder'withagoadsize a d

e. seated well on the hdndl~

TANGS

The tang 1s the means whereby the blade ~tselfcan be

I
fitted wlth something more comfortable and
amenable to the hand than steel (Flg 2 72). The word
tang comes, through Danlsh, from the Old Norse
word tun@,meanlng a point or splke. In dlalect, tang
has also referred to a serpent's tongue and an msect's
sting, and, mnterestingly, connotes a penetrating taste.

I
Fig 2.70 1 he same shoulder from the ha& s&; zt 1s The use of a tang is only one option, however.
&our that houble has been taken m the shap~ng Another method, better m some ways but ~nvolving
 WOODCARVING TOOLS LATERIALS & EQJIPMENT

Fig 2.73 A socketed sh~@might's chzsel w ~ t han won em

femrk; such a strong socket WE take far more pum5hment
Fig A strong, straaght, welCmade and purposeful tang than a tang

more labour and materials, is to form a conical socket originally Important when the metal of the blade had
into whlch the handle is fitted Thcs seems to have poor edge-keeping qualities and the woodwork was
been qulte a common method in the Bronze Age, monumental - heavy work by roday's standards.
when casting the socket was part of casting the tool Before damp-proofing, tools were more prone to
~tself.You can see examples of these tools, along wlth rust, especially in the tang, which is hidden away in
tanged chisels and gouges, m the Nat~onalMuseum of the handle. If oak was used for the handle, as it fre-
Wales, Card~ff.As early as the Iron Age, when the quently seems to have been, the tannin in it would
forglng of tools had just started, socketed gouges were react wlth the Iron of the tang when moisture was
being made - one of these can be seen at the Lake around. Thls corrosion of the tang, even when the
Vdlage Museum in Clastonbury, wlth a handle turned handle is not oak, is still seen quire often in old tools
m oak. The Egypnans and Romans, whose tools can be that have not been kept cn dry cond~tions.A socket,
seen tn many museums, also commonly used sockets bemg a bigger mass of metal, resists thcs corrosion for
as well as tangs on then chlsels. Depictlorn of much longer.
medleval woodcarvers cncluding those carved on
- The socker is, therefore, tougher both mechanl-
m~setrcords,whlch must have been made by people cally and in its ablhty to resist the effects of tlme and
who knew about these thlngs - invanably show sock- damp. Early toolmakers would have apprectated that
eted gouges. The socket probably fell out of favour - bearmg tn mmd the effort involved m m h g lager,
eventually because a tang 1s less labour-mtenstve to heavier tools - socketed handles were a better mvest-
make. However, the socketed blade can still be seen ment of effort.
in heavy chlsels used to cut mortlse-type woodworking Sockets are still common In many cultures today,
joints, and m wheelwnghts' and sh~pwr~ghts' ch~els but they do make tools heavter. When it comes to
(Fig 2.73), sometimes found In second-hand tool smaller srzes, though, the socket tends to merge mto
shops; m the USA it is still quite common for general the handle and produce an elegant tool. Should you
woodwork. Some Chinese and Japanese chisels have come across any of the old heavy-duty socketed tools,
both sockets and tangs. remember that they can be reshaped into large, very
The socket, mergmg mto the blade, gives a much tough gouges for sculpture.
stronger tool that can be repeatedly and forcefully Another optcon, cnstead of usrnga tang or a socket,
snuck - conslder that a 1Xm (38mm) gouge may only B not to have a wooden bandle at all. The whole tool
have a %m (13mm) shoulder and a Km (6mm) tang can be made from a bar of steel - like a stonecarving
behlnd it. The strength accorded by the socket was chisel - and is struck with a metal hammer.
-
BLADES

The metal part form~ngthe 'handle' can be made

more comfortable by btndlng it with a leather thong
or some type of cane. This way of mak~ngcarving
tools IS qulte useful rf you are makmg your own,
as there IS stgnlficantly less effort rnvolved m worklng
a blade Into one end of a slmple bar of metal. Tnts
can be of particular importance in countries where
energy is constdered more prectous than it IS m the
industrial~zedworld, and it 1s m these cultures that
this sort of tool is most common.

TYPES
There are two types of tang: tapered and parallel.
I
Both types are most commonly square m sectton, but
the ~arallelones are sometmes round (Fig 2.74). i
These requtre slightly d~fferentapproaches
.. when it
comes to fitttng them lnto the handle (see pages Fig 2.75 The parallel, round ulng is unusual and does not
69-70). The comers of the normal square-sect~on 'bzte' the wood hke square-secnmd tangs in dus case the
tang bind Into the wood and stop the handle tumlng tang, and shauldPr, are shong and well made, so there
on the blade A round tang cannot bite the wood in should be no probkm p r o d n g the rang gnps the hole in the
the same way, and is therefore not as good (Ftg 2.75). ha& nghtly enough

Fig 2.74 i n general there

I
me three types of tang, of Cross section
whzh the square tapenng
m t a the most common
 WOODCARVING TUOLS, MATERIALS & EQUIPMENT

A tang can be made well or badly, w ~ t hsome manu-

facturers pedormmng better than others. The tang has
several Important functions - often disregarded - and,
hke the shoulder, the shape of the tang may cause it
to function effic~entlyor mefficlently.

The tang must be made without too many

lumps and bumps, and should be straight
The tang must allow the handle to be fitted. Some
carvers try to protect the tang from rust by soaking it
in oil and pourlng a httle more Into the hole before
actually fitting the handle.
1

The tang must be in a straight line with the

rest of the blade
This, if nothing else, is bound to affect the feel of the
tool in your hand. From the arm, the hand grips the
handle of the gouge in a straight line of intention. e
This intention wants to be carried straight through to

I
the cutting edge without veering away to one side.
Some carvers do put up with tools whose handles are
bent at an angle to their blades; only when the
handle and blade have been lined up correctly do
they realize how .much more satisfying the tool feels
in this condition.

The tang must not be bent at an angle

I have seen this angle as much as 20" out of true. If
such a gouge 1s struck h e a d y w ~ t ha mallet, even
-
with a good shoulder and ferrule, the bend can
become gradually worse and the tool may threaten to Fxg 2.76 Where the tang IS bent at an angle to the ans of rn
break (Fig 2.76). The tang, shoulder and shank are the blade, some of the mallet blow or dnwrng force wrll go &I
made of a softer-tempered, less brittle metal com- Into k m n g the tool - posstbly bendrng a jbrther
pared with the blade itself. This is quite deliberate,
allowing the impact of a blow to be absorbed and
a
The tang should not be offset 4
transmitted through the metal without its breaking
1
under the stress. Should there be some angling away The tang is correctly aligned when it runs down the
from the central axis of the tool already, there will be central axis of the shank and blade If it IS parallel to 3
U
a tendency for the softer metal to bend further. this axls but offset to one side (Fig 2 78), fittlng a B.
Bending can also happen when the tool is used inap- handle without the shoulder overhanging the ferrule i
propriately like a small crowbar, to lever pieces of becomes more difficult Thls fault also affects the feel UP
wood away (Fig 2.77). of the tool, as mentioned above a
C

BLADES

I
-- -

Fig 2.77 A good way to b e d the tang or break, the blade u to use t k tad to lrur away pzecer of wood

Fig 2.78 A stracghtedge apphed to the photograph wcU

demonsmte how far the tang IS from true

The tang should be of a size and shape

appropriate to the work that the tool can
reasonably be expected to do
The tang should not be too short and fat, as thls
provldes l~ttlepurchase on the handle and ~nterferes
w ~ t hthe shoulder, nor should it be too long or th~n Fig 2.79 When we get to carwing tools of thu sire - 2%in
m a larger tool, as this may be a polnt of weakness (65mm) - a tang only %in (6mm) w& IS begnncng to look
(Fig 2.79). a lmk mnadeqnte, and a socket mcght be a better ophrm
 -
W O O D C A R V I N G TOOLS. MATERIALS & EQUIPMENT

Hg 2.80 summarues some of the faults to be avo~ded. of the tool, bearlng all the above polnts ~n mmd.
There can also be a problem wlth tangs molder tools Some faults can be corrected, but where they cannot
whlch are partly, or completely, rusted away. All - or perhaps you do not feel you should have to cor-
mmght not be lost: see the sectlon on second-hand rect them - return the tool with the appropriate
tools m Chapter 5 (pages 95-6). explanat~onand politely ask for a better one. Puctmng
If you ever have occaslon to buy tools without up w ~ t manufacturing
h faults does nobody any favours
handles, carefully Inspect the tang along mth the rest m the long run.

Ihe
-mk
and 5
xow
&e h
Fig 2.80 Some faults Sl
commonly found i n tangs: 2110Il
(a) angled with respect to TheI
the axis of the blah; (b) I
alrea
~arallelto the axis but aha
I
ofset to one side; (c) too
short, with not enough
1. , CODs

-1
-
odw
shoulder; (d) too long and ;
; C
thin for the size of the blade! :m
ual!
caw1
ni.5

quer
ferm
ham
auk

52
 CHAPTER THREE

HANDLES

OVERVIEW not have lasted as long, but replacing them would not
have been considered a problem. OId handles of a
factory-made type often show a variety of marks, glyphs
The prevlous chapter started by looking at carving or notches where the carver tried to make some tool
tools from the end furthest away from us: the blade handles stand out from others.
and shank. Then we turned to the shoulder and tang. Today, manufacturers rarely provlde more than
Now we come to the nearest part of the whole took three sues of handle, all exactly the same shape, for
the handle, whlch is often undervalued. the whole range of thelr carvmg tools. In fauness, this
Supplying tools wlth fitted handles is a phenom- is probably as much as they may reasonably be ex-
enon of mass production over the last 100 years or so. pected to provide, as they are primarily makers of
There 1s at least one advantage: 1f the tool is supplied carvlng tools, not handles.
already 'handled' and as the tendency is today -
- Factory-made handles are therefore convenient,
already 'sharpened', then, m theory at least, you can but all the handles are more or less the same; hand-
consider yourself up and runnmg for the nearest plece made handles involve additional effort, but the result I

of wood. is more individual and personal. This needs to be

1
1
Carvers used to buy the11 tools d a n d l e d , w ~ t h considered a l~ttlefurther, because there are defin~te 1
lust the steel blade and its naked tang. Unhandled advantages to handmade handles, making the addl- I
tools can st~llbe bought from some supphers. The tional effort worrhwh~le.The handle makes the tool
carver would then make and fit a handle personally. more comfortabIe m the hand, but there 1s more to it
Thls was usually from a square plece of wood, subse- than that.
quently shaped to an octagonal section and without a T h e handle lies between the blade, which works
ferrule. This meant that - depending on the wood to the wood, and yourself, who duects the canring. Its
hand and the mood of the carver the handles would
- very name describes its funct~on:~t is the b ~ you t
all be drstmct. Wrthout the ferrules the handles may Onandle' and actually hold in your hand (Flg 3.1).
 WOODCARVlNG TOOLS, MATERlALS & E W I P M E N T -

Fig 3.1 This is what the 'hand-k' u about

Lylng as it does between the blade and you, it must

have a relationship not only to the slze and shape of
the blade, but also to the hand or hands holdlng rt.
Fig 3.2 Effmtkss cmwng by ~JEgreat masm
The handle plays a vltal role ln establlshmg the corn-
R~emenschneuIer.St Barbara (BayerischesNanonalmweum,
fort, strength, efficlency, balance and 'feel' of the
Munich) carved about 1515m limewood
whole tool. A tool may be perfectly sharpened but
st111not 'feel rlght' it slts awkwardly m the hand; per-
blade itself. After all, it 1s your hand on the handle,
haps it IS not one to whlch you feel attracted. Thls m
not a mass-produced, average hand. Bes~desth~s,
rurn wlll affect hhw you came, in anything from a
there are several other reasons for not buying factory-
subtle to a significant way.
made handles:
It 1s not the tools themselves wh~chdeclde
whether a carvlng is successful or not a whole array
-

of mental factors and attmtudes surrounding the act of

A mass-produced handle looks like every other
mass-produced handle
carving Itself come into play as well. A tool appears to
respond to the amount of effort, even love, that is put It is qulte possible t o have 40, 50 or more carving
Into as care. Such an attitude of care and attention to tools arrayed on the bench and at work. Every carv-
the tools feeds INO rhe process of carvmng. It 1s hard ing tool that you possess may be on the bench among
to abuse a beautiful tool, one Into whlch a lot of care wood ch~ps,sawdust, penclls and other tools In such
and effort has been put. It 1s as if the tool draws your cases slmllarlty between gouges and chlsels can cause
best effort towards itself. Carving tools are the vehicles confus~onand lrrltation (Fig 3.3). It is Important for
through wh~chcreativity and pleasure flow. A carver efficlency and contmulty of purpose that ~ndlv~dual
absorbed In carving w l l forget the tools at this
- tools are readlly recognized and plcked up. This 1s
polnt you are working d~rectlywith the wood, with- accomplished far more eastly d the shape, sue, type
out any tool m the way (Fig 3.2). of wood or colour of the handles IS vaned (Flg 3.4).
Thls 1s the first reason for making your own tool It helps to dlstmgutsh at leasr some of the handles
handles, or at least some of them. you are mak~ngthe on your carving tools, even if you do not do it for
tool personal m a way which 1s not possible w ~ t hthe all of them.
I HANDLES

Fig 3.3 Although there n

notlung 'wrong' wrth the
handles m themselves,
when such mass-produced
hnndles are aligned on the
bench, the~rszmzlar
appearance can be
confusing

Fig 3.4 D~fferentlyshaped

handles, also In drfferent
types and colours of wood,
make tools more
immediately recognizable
on the bench
 WOODCARVING TOOLS ATERIALS & EQUIPMENT

The w e r d l length of the tool can be controlled The handle can be mited to both the hand
by varying the length of the handle and the blade
For example, a particularly shoa tool can be given a Because ofthe limxted range of mass-produced handles
better overall workmg length - and a longer useful compared with the large vanety of carvmg-tool
life - by mcreasing the length of thehandle (Fig3.5). shapes and sizes, such handles can often be entirely
Another example would be fitting anextm-long h- the wrong size or shape for the tool. Smce hands vary
die to a large flat gouge; this gives the tool greater slic- as well, the handle may alsa be uncomfortable.
mg leverage and speed for cleaning and finishing The handle of a sculpture gouge needs to be
backgrounds (Fig 3.6). gripped comfortab1y and held easily for long perrods
There are shapes which are more sufced to mallet
work, tendmg to bind into the hand berm and not
sliding &mu& (Figs 3.7 and 3-8).

Fig3.5 i t is poss~bleto lengthen a short tool to thre m I Fig 3.7 This des~gnof handle which I have developed fm
overall length by means of a cwtom-made handle sculptwe gouges . .

z l ~ othe hand well.

hl ILW mi te~tdiru gn11
e 3 . 6 The extra-long handle on one of Lhese shallow nurre firmly mla~~r
,
p p fmlitates the flattenmng of backgrounds
t i ~ t h rt y~p ~ s
 DLES

aattening one side of the handle of a straight control over some of the qualit~esof your cawing-tool
uge, the handle can be lowered that little bit handles - the next step would be to make your own
tra, which gains vital access for the cutting edge in handle from the begmnning.
hollow when a bent tool of the same shape is If you have quite a lot of tools w ~ t h
mass-produced
handles, consider remaking the handles a few at a
time, starting with favourite tools. You may be able to
see some ways of reshaping or altering the existing
IMPROVING BOUGHT handles to make them more personal, distinctive or
better-functioning.
HANDLES It is not difficult to your ow 'h-d-figieSfb;r
woodcarving tools, and the time invested is not much
i h t handles very often h@&,:gthi& layer i f varnish compared to the years over which you may be using
them. Once the importance of handle quality is real-
ized, no further encouragement will be necessary.
Of course, there is nothing to stop you going
e - these are often found at the very end of an stramght ahead w ~ t hmass-produced handles and pro-
tagonal handle (Fig-3.10). Octagonal handles are ducing wonderful cawmgs. At the end of the day
od shapes for setting down on an inclined plane - handles are not camngs, only part of the means
instance, when lettering a panel - as they do not towards that end. What I am tlymng to promote here
so easily; but end comers, if they are not softened, is an attitude of positive regard for carving toolsi
ork into the palm of the pushing hand. in the hope that this attitude-will make the cawin@
rnish can be removed with sandpaper, followed itself more satisfying and successful. This attitude or
approach works with creative potential, rather thaa
d or sanded away. This allows you to take some against it.

- .
a glob on the ferrule. Removing it may make Fig 3.10 Ocragowl handles can haue quite sharp comers
r h more comfortable (top); round them ousr to make them more comfortable
 WOODCARVING TOOLS, MATERIALS & E Q U I P M E N T

SHAPES AND hands, and so on. There is a latge degree of free

chove, wtth no hard-and-fast rules, but here are some
IDENTIFICATION useful guidelines:

From the ~llustrationsm thts chapter it can be seen

that handles can have many possible shapes - some
SIZE
very tradit~onal,some a ltttle more unusual. When A good overall lengtb for a woodcarving tool is
you come to choose the shape and m e of handle, you somewhere between 9 and lOm (225-251)mm),
mll need to bear in mind the shape and size of the so you need to adjust the length of handle to suit
blade to which the handle will fit, the 'toughness' of Around 4-5m (100-125mm) for the handle is

4-51n (100-125mm)
-- 4-51n (100-125mm)

9-101n (225-250mm)

Fig3.11 The overall length of a cariinx tool w~llinwolue a balance beteveen the len& of the blode and that of t h ~handle

I be caned to suct the tool or the user

I

I
 HAN D L E S

SHAPE(Figs 3.14 and 3.15)

Large gouges need larger, heavier handles.
Thin, delicate gouges suit longer, thinner
handles.
Short, small gouges can have the length of the
blade made up i~ the length of the handle
A carving tool that is struck a lot with a mallet
mlght be held better with a more wedge-shaped
handle a shape which grips into the hand. The
-

wedge does not want to be too conical; this m

itself can feel uncomfortable. Fatter, barrel-like
shapes tend to pop out of the hand. The
Fig 3.13 Roughly the same sqe of tool, fitted w ~ t hd~fferent
concavity of a wedge-and-ball, London pattern
sges and shapes of h d k by different manufacturers. The
or pattern-maker's handle (bottom right m Flg
c h e e comes down to ~nd~endunlpreference
3.12) garns a good purchase for the first finger
and thumb.
The width of the handle w usually %lin
(22-25mm) at its maxlmum polnt, but should be Make sure thme are no hard comers to d ~ gInto
larger for bigger hands (Fig 3.13) the palm of the hand that is pushmg the handle.

-
. Some cIass~chandle shupes
Fig ._
 po~irionalorigthe letlg~h.So cii11 rllc ;Imount of
t.liis t~lllrein relarion rv rhc length. This will bc a

,* ~@c&gQfi.~'~fldqs?@r~
gi~pg~.~p.c~,~e
se~ursIy&q:t'tu~dme$1atid.J~~a@ $l.'ijil.&~t;
,be~~&'Theg canbe madeby shaping a;sqmxe+
,seati& pie= of m a 4 xatherthan hyu+.aL
.&%, T ~ & &&$ gQ%sak &j ahrnan *=*
.-
t h &rtig@&i;@@$ @$! $ej@Ilrv; @I&
~

.~ad@@ &$@u&
-. ufa ~2 Bfi $5rQ8mL ;wdkQ,
. .. .... .. .. . _ .
,
" ~ " ,
.. .
b$ &. , .,. Q ~. $ ~ g q ! g ~ ~ & < ~ ~ a p ~ M ~ : @ & : c ~
.,

.'1nya&~&~&~:k&[q~ ,palad.gi11 d@
&$ h w e ~ e m J e ~ a ' I , fsy& ~ ~ s k ; ~%not
m 5 t@w
mu& effort to makeanother..,
-
HANDLES

and open-gramed. Wood for handles should be taken

from the tougher heartwood, although not from the
actual centre of the tree. This would be the toughest,
A tool used for light work will probably not need hardest option. Some woods, lrke ash or hrckory, have
a fermle, or even a shoulder. However, make a natural reslltence or sprmginess.
sure the handle LS made from tlght, straight-
grarned wood. STRAIGHTGRAIN
A larger tool, domg more work, wtll benefit from The gram of the handle should run along as axis,
a ferrule at the tang end to make sure the wood
not dtagonally across tt, even m part. Thts IS espe-
does not split here.
c~allyimportant if a mallet is to be used: cross gram
If the tool is expected to take a great deal of m the handle can split from a blow on the end
pounding from the mallet, an additional ferrule (Ftg 3 31. Uneven, difficult grain can also create
on the top end of the handle will cause it to last problems when fitting the tang into the handle.
longer, preventing the wood splrtt~ngand Knots may be a problem, dependmg on where they
mushroomrng out. are, thelr size, and whether they are 'Lve' or 'dead'.
They can be an attractive feature, as can burled
(burred) wood, but you need to be careful when using
WOODS the mallet

CLOSE
GRAIN
Handles need a resiltent hardwood with close,
straight gram, that has been properly sasoned (defi- Trees which have grown very qutckly produce broad
nitely not green) Certain factors are important in annual rings and relatively light, soft wood the -

determining the suttabilicy of a ptece of wood to be heartwood can be as soft as the sapwood. Use a tight,
used for maktng handles close gram, where the tree has grown slowly. Usually
it is lust a matter of selecttng and putting aside odd
bits of wood for use as handles when you need them.

Wood can erther be taken from near the centre of the

tree (heartwood), or towards the outside (sapwood).
The wood taken from towards the outstde, even The following list, which is by no means complete,
though the tree is sttll called a hardwood, can be soft may be useful in selectrng wood for a handle:

susceptible to sphttzng,
especially when a mallet
is used
 WOODCARVING TOOLS MATERIALS & EQUIPMENT

9 For tools smck heavily wlrh a mallet: box, ash, TANGFERRULES

h~ckory,pau marfan.
Such ferrules rernforce the wood agalnst the t q
For tools occastonally struck wrth a mallet: any of
bemg driven, spike-l~ke,into the end grain. When
the above, plus beech, well-seasoned oak,
force is exerted sideways on the blade, the ferrulep e
kuitwood (such as cherry, apple or plum), maple,
vents the handle splrtting. More delicate
sycamore, hornbeam.
tools, and those wlth good, flat shoulders, do nm
For tools rarely or never struck with a mallet: any actually need a ferrule - although one ts often fitted
of the above, plus rosewood, teak, mahogany. to the handle as a matter of course.
Manufacmred fermles are normally made of b r a s
which resists s~etchingand does not corrode. If yco
FERRULES cannot buy purpose-made, loose ferules, then a
strong plping or tube with walls about % e X i i ~
(1.5-3mm) thick mll s~bstimte.A short tnp to a
A ferrule ISa metal collar b~ndmngthe end of handle a scrap yard or metal supplter's wlll produce enough fez-
to strengthen the wood against splitting. The word rule metal to last a lifettme.
itself relates both to the Latmferrum, meaning 'iron', The size of the tang fermle should relate to the sin
and to the Old French arelie, meaning 'a bracelet'. of the blade, particularly its shoulder and tang (Eg
Many terms show the great importance of the 3.18). The shoulder can rest on the edge of rhe fa-
Norman and French ~nfluenceboth on stonecawing mle, but an overhanging shoulder ts uncomfonablr
and woodcarving in Br~tam. The amount of wood between tang and femle shod3
The fertule can be fitted at elther the tang end be neither too great, in whtch case the wood g r v s
(a tang ferrule), or the free end of the handle (an nor too ltttle (for Instance, d the fermle 1s very th~ckl,
end ferrule). in whrch case this part of the handIe is weakened.

An overhang 18

Shouldei flush wlth

Small shoulder in the Punched depiess~on

I
wood of the handle t o prevent sllpplng

Fig 3.18 The rehhon of

the shoulder or bolster to 1 ' I

the ferrule J

62
 HANC

One important feature of a ferrule is that it has a

bevel on the inside of one end. This end is offered to
the wood of the handle, which is made a touch over-
size. When it is tapped home, the inside bevel pinches
the wood tightly and the ferrule compresses the wood,
m it will not work loose if the handle eventually
shrinks a little (Fig 3.19).

- 3.21 A jawourite shoul .. .... >eneft., 1 a

lovely bit of ferrule improvisation

' Manufactured handles today sometimes have an

internal ferrule, which may be visible only when the
blade is removed (Fig 3.20). Home-made handles
may be protected against splitting in a variety of ways
(Fig 3.21).

When a mallet is used, the top of the handle takes a

great deal of punishment and is easily damaged (Fig
3.22). It is sometimes possible to salvage a damaged
handle by paring away the broken part, or by gluing
splits before they develop too far (Fig 3.23).

E g 3.20 Internal ferrules hke tlus are mostly found on the

mass-produced handles ojconhnental Europe The offset Fig 3.22 Repeated mallet blows may eventually split pieces
hak m this example a not mtent~onal off the end of the handle
 W O O D C A R V I N G T O O 1.S MATERIALS SL E Q U I P M E N T

Fig 3.23 Damage to the

end of the handle may be
tnmmed off (topop)or glued
The czrclip on the lower
handle was an emergency
repazr to allow the doomed
handle to be used a whzle
I
longer

Fig 3.24 TWOscu~pr

gages faed with end
ferrules

Fig 3.25 Even an iri

f e d cartuselfbwri
after weeks of hard nu

If a tool is going to be struck heavily with a mallet,

the life of the handle will be considerably extended
by banding the free end with a thick fenule (Figs 3.24
and 3.25). This needs to be thicker-walled than a
tang ferrule, and preferably made of iron. Many types
I
of piping will be suitable.
With a steel or iron ferrule on the end of a large
sculpture gouge, a soft-metal dummy mallet, such as
is used by stonecarvers, can be used instead of the
normal wooden mallet. This sort of mallet is made of
soft, annealed iron and has the advantage that a good
weight is possible without bulking up the size.
 HANDLES

MAKINGAND FITTING
FERRULES
Mark the selected rube and cut it squarely wlth a
hacksaw or a pipe cutter. Clean up and remove any
burrs on a benchstone or gr~ndingwheel. (Be careful
here: gr~pthe tube m self-locking Mole gr~ps,and
apply it lightly to the slde of the wheel.) A n mnside
bevel can be formed wlth a round file or a small, con-
ical grind~ngwheel, such as chose des~gnedto fit Into
an electr~cdr1I1.
For a tang ferrule, the end wood of the handle,
onto whmch the shoulder of the blade sits, should fin~sh
flush and square wlth the free edge of the ferrule.
Flatten the end wood wmth a sanding block after t!+e
farule is fitted.
For an end fenule, allow the wood to extend a
little way out of the metal tube. With use the wood
will eventually mushroom over, tak~ngthe metal of
the ferrule w ~ t hit, givmg rlse to less wear and tear on
the mallet. You may like to start this process by plan-
ish~ngover the comers wrth a hammer first
When any type of femle is fitted, a should butt
onto a l~ttleshoulder formed mn the wood (whlch Fig 3.26 Accurate bonng is needed zf ,.- ,Ais to be
must be made at the same tlme as the handle), just concenmc with the ha&
mde enough to merge the wood comfortably with
the metal. planed, but can be accurately bandsawn; a little care
Sometimes, as an added precaution, a centre taken over the initial accuracy of the blank makes the
punch IS used to make one or two depressions m the following stages easier. Mark the centres at each end
side of the ferrule - this locks it on m case the wood of the wood by drawing diagonally across the comers,
shrmks or the femle works loose. and use a point to punch a small starting depression
at the point of intersection; this will prevent the drill
bit wandering as it starts to bite. Once you have a
MAKING HANDLES squared-up, centred block, you can bore the hole.

The hole into whlch the tang w~llfit must be al~gned

along the central axis of the handle (Fmg 3.26). To Whether the tang is tapermg or parallel m section, it
achmeve this, bore the hole fust, wharever shape of helps to drill an accurate pllot hole first, no more
handle you are makmng. If the hole is first made true, than Xm (3mm) in d~ameter.It can then be enlarged
and rhe shape then worked around the hole, the tang w ~ t ha drill of the appropnate dlameter to fit the tang.
-and the blade wrll al~gncorrectly along the handle
-
If you have a parallel round tang, make the final
(provided the tang IS true to the blade)
hole an exact tight fit along its whole length.
It 1s also helpful, but not necessary, to start wlth a
square-sectioned plece of wood wh~chis a httle over- For a parallel square tang, bore the hole to a slze
size and overlength. The wood does not need to be which is halfway between the d~agonalof the
 WOODGARVING TOOLS. MATERIALS B EQUIPMENT

square and one of its sides (Fig 3.27). Test the fit splittmng, then enlarge the hole to about a thud
of the hole first on a piece of scrap wood. The of its depth by boring with a la%er drill. Take a
comers of the tang bite and lock into the wood measurement of the diagonal of the tapenng tang
of the hole. a third of the way down from the shoulder, and
make the diameter qf the second dr~l1.
For a tapered tang, bore a guiding pilot hole
about %m(3mm) in diameter and use the 'twist'
There are various ways; to bore the hole accuratek
method of fitting the handle which is described
The easiest method (whether you we intending tn
later (page 70). This method also works for
turn the handle or not) is to bore the hole on a lathe
parallel square tangs, though it is not possible to
the wood automat~cdlylmes up axldy between the
adjust the angle of the handle in the process, as
centres (see opposite).
you can with a tapered tang. If the wood 1s
The next-best method is to use a ~11lardnll, which
something like box, with a propensity for
n, in effect, a lathe turned vertically. The handk
needs to be algned correctly uslng a simple jig. Pass a
screw perpend~cularlythrough a place of p l y w d
MDF (medium-density fibreboard), etc. Clamp th
plate to the pillar*dnll cable so that the drill hi
Measurement across diagonal . . .
descends dead on the point of the screw.
To use the jtg, place the centre of one end of tk
wooden blank onto the screw point and lock the pib
l a drill to &rana little above the other end. For the
pilot h l e of %in (3mm), you can hold the wood in
position wirh one hand and lower the drill with the
other. Clear rhe hole of sawdust regularly and the=
will be lirrle prohiem with the wood twisting in your
grip. If some clamping method is available with the
would produce too big a hole drill, then do use ~ t .
If you have neither lathe nor prllat drill, bore the
The tang hole has to be about halfway hole uslng an ordiiary wheel brace (hand drill) rn
between the two
a hand-held electrlc drill. The problem still remaim
of how to bore the hole true; the tried methods of a
Measurement across width of tanq . .
helper's eye, or a setsquare placed as a guide o n the
bench next to the dnlliig, can work well here. In am
w e , it 1s best to bore the hole while the wood i s over-
me; ~tcan then be titted partway on to rhe tang and
the axis of blade marked on it before shaping.
Once the ptlot hole has been drilled, the size d
the hole can be incrementally enlarged as necess-
Hold the wood in a vice and allow each bxt to folios
the hole made by the receding one.
would oroduce too small a hole

SHAPINGTHE HANDLE
OCTAGONAL HANDLES
Fig 3.27 Estimating the correct size of h o k for a parallel Tiy and get these as accurate as possible, although
square tang what really matters is the feel of the handle - test thir

66
 - HANDLES

often. There should be enough w~dthof wood remam- fit one, it rs either a job for the lathe, or a
mng at the tang end for any shoulder to seat correctly matter of parlng or rasplng the wood Into shape.
Bore the hole first, bear~ngmn m ~ n dmy earher com-
@ Sand the handle smooth; round over the end
ments on the shape of the tang (pages 49-52).
that wlll push mto the palm of your hand, and
@ Start w ~ t ha square plece of wood, accurately seal the wood as for the turned handle described
sawn (and planed if possible), w ~ t hthe centres below.
marked at each end.
TURNED HANDLES
Q Draw the profile of the handle on one face of
the wood and cut the waste off cleanly using a Bore the hole first, w ~ t hthe drlll b ~held
t in a
bandsaw or coplng saw Jawbs chuck at the drlve end of the lathe. Use
a slow speed, and feed the wood from the
@ Use adhesive tape or mask~ngtape to reattach tallstock to the necessary depth (Flg 3.28).
the blts sawn off and, turnlng the wood over
Mark the depth of the varlous dr~llb ~ t sw ~ t h
90°, draw the profile agam.
masking tape. If several handles are belng made,
@ Saw off the waste a second time and you sho;ld bore them all as one procedure.
end up wlth a four-slded profile of the final
Q Remove the wood and the Jacobs chuck fiom
handle.
the lathe, and fit the normal dnve centre.
@ Smooth the faces squarely wlth a spokeshave, Reverse the wood on to the lathe so the polnt
rasp, file, etc. of the revolving centre 1s in the hole, and
tlghten up.
Q Chamfer the comers by eye In the same way to
glve the eight sldes I t may be helpful to make a @ Rough the handle to a cylinder, then move In
V-shaped cradle to hold the handle securely, as the toolrest as close as possible.
shown rn Fmg 3.36 (page 72).
@ Fmt the ferrule next; mark its length and a lmttle
@ Octagonal handles, as mentioned before, extra on the end of the wood. Uslng a square
normally do not have femles If you do want to chisel and callipers, carefully reduce the wood
 WOODCARVING TOOLS. MATERIALS & E Q U I P M E N T

Fig 3.29 Sizing down to a

close ft for the fermle

to the attslde diameter of the ferrule, keeping down to the femle, but leave it a shade proud
the shoulder square (Fig 3.29). Stop the larhe where they meet - a definite, but small, shoulder
and try pushing on the ferrule; remember to should remain.
offer the end of the ferrule wlrh the Inside bevel
to the wood.
@ Sand the handle and then burmsh with
shavmgs. The wood can be left like thrs,
By trial and error, creep up on a final diamerer acquiring the natural patcna of use, or sealed
where the ferrule pushes on tlghtly. You may with a coat of teIlulose lacquer, vamrsh or
need to rake the handle off the lathe and, with shellac. Cut the sealer back finely. Do not give
the ferrule on the edges of a vice or prece of the surface a shiiy or glossy finish: thls makes
tube, tap the ferrule home. the gnp uncomfortable, slippery and poss~bly
0 An end fernile, if required, is hued in a similar dangerous,
manner.
@ Use the poinr of a rumer's skew chisel to trim
Q Now, wlth the f e d e in place, shape the back the excess wood at the ferrule end, but
handle. Round the end to fit comfortably in take care not to cut into the revolving centre
your hand. Do nor run the wood completely (Fig 3.30).

Fig 3.30 Cleanzng the

end of the fully shaped
handle wzth the skew
 HANDLES

@ Part off the handle and remove it from the correcting too large a hole, or one that is offset. The
lathe. Hold it m a vice and finish off both ends only snag is that if the tool is struck with a mallet, the
wlth a chtsel and sandpaper. Flatten the hole tang will work loose; but for lighter tools this method
end so that the blade shoulder fits flush to the is quite adequate.
wood. Seal the ends in the same way as the rest To knock on a handle, the blade must be held
of the handle. properly. If you were to set the blade upright so its
cutting edge was against a resistant surface and then
@ Finally, punch a locking depression in each side thump on the handle, there would be a problem: the
of the ferrule a nail will do for this. A thick
-
tool would have nowhere to travel and, as the energy
end ferrule may need a small hole with a nail from the mallet blow could not be released, the blade
tapped in. might crack. This is particularly true of U-shaped
blades, where the bevels on either side act as wedges,
squeezing the sides together.
FITTING HANDLES Instead, grip the chisel in a vice by the shank of
the blade, so that the shouMer is supported on the jaws
of the vice and the tang points straight up in the air
Faults with the blades, and especially the shoulders (Fig 3.32). A metalworking vice with soft metal linings
and tangs, need to be corrected as far as possible to is the best sost to use; but a woodworking vice is an
give the best chance of fitting a handle well. These alternative, if you first pack out and protect any
are dealt with in Chapter 4. wooden linings with scrap hardwood.
Old carving tools can be found with quite large
and not particularly accurate holes for the tangs, filled
with gutta-percha (a resinous gum from a Malayan
tree). The tang has been pushed accurately into the
gum which has then set like hard, black horn, fixing
the blade neatly and securely in position (Fig 3.31).
This is a trick worth remembering. Modem equiva-
lents (such as the two-part plastic fillers intended
for car bodies or wood) will repair a handle, perhaps

Fig 3.32 Toft a handle, hold the tool so that the

Fig 3.31 An old carwrg tool m wh~chthe blade has been shoulder rests on, and a gnpped by, the jaws of a w e , wrth
fitted to the handle w~thgutwpercha the tang vertical
 -

- WOODCARVING TOOLS, MATERIALS & E Q U I P M E N T

The other point to mentron is not to thump too O Tap the handle a little more and twist again.
freely, but take the fitting of the handle in a relaxed Remove the handle and tap out the dust
and easy way.
@ Keep repeating t h ~ process
s with the handle in
The method varies for parallel and tapered tangs:
one hand and the mallet m the other, taking
the handle off now and then and tapplng out
PARALLELTANGS the dust. You will fairly quickly get a rhythm,
and before long wlll have set the handle down
If the holes are the rrgkt size, the parallel tangs, both on the rang to within %in(3mm) of the
round and square, should knock snatghr on with a
shoulder.
mallet.
@ At this pomt clear the dust out one lasr time
and select which part of the handle - perhaps a
TAPERED
TANGS pleasing bir of grain - you want to appear
Q Tap the handle, wth its pilot hole, on to the where. More importantly, if the tang and hole
tang a lrrtle way then ~ ~ 1it saround
t both ways are at all offset, now is the nme to Iook for
- the tang 1s bezng used to ream our the hole ' 'compensating errors' - the handle may well fit
(Fig 3.33). straighter one way than another.
8 Now tap the handle home, and there should be
no problem of sphtting. If your tang and holes
are true, the blade mll be allgned along the axls
of the handle.

One final point: the method by wh~hlchthe tang is

heated and burnt into the handle 1s only appropriate
if a hole cannat be bored and you are really desperate.
While no doubt it is fun, it also chars the wood inslde,
allowtng the handle co work loose; it can be messy
and not mthour its dangers - both to the lungs and to
a wood-filled workshop; and it can, if care is not
taken, damage the tempemg of the tool. It 1s also
much slower than any method described here - all m
all it is not a technique to be recommended.

REMOVING HANDLES
Although problems of sticking do arise with old tools
and mry tangs, the handle of a woodcarv~nggouge or
chisel normally comes off without much difficulty.
This IS especrally true of tools that have tapered,
square tangs - these lock securely in place during use,
but release from the wood fairly easily when requaed.
For the follow~ngmethods of removing handles,
gr~pthe tool in a vrce by a substantially strong part
Fig 3,33 The 'tap and t m t ' method of fitnng a handle such as the shank, just beyond the shoulder. If an
 HANDLES

~gineer'svice with metal jaws is being used, pack the

ws with hardwood pieces to protect the blade from
zing marked. When the shoulder sits tight up to the edge of the fer-
Never grip quick gouges - and especially U-shaped rule, the wooden wedge cannot get a purchase on the
les - across the blade. The pressure of the vice can handle to knock it off (Fig 3.35). You need to
.ack the metal which, having been hardened and approach the joint between the shoulder and the
:mpered, is more brittle than flexible. wood from the side with a screwdriver or one of your
less valued chisels, trying to loosen the handle and
gain enough space to apply the wooden wedge. Be
careful not to damage the ferrule with the chisel or
Iith the blade held firmly in the vice, try the handle screwdriver. If you do, the ferrule may need filing or
little while gently twisting it. Sometimes this is all touching up on a grinding wheel.
lat is necessary. Be careful, as the handle can come
Y very suddenly; so make sure that nothing is in the
ay of your elbow as it travels backwards.

. wedge of hardwood, shaped lik

ead and long enough to grip, is applied to the ferrule
it is visible around the shoulder (Fig 3.34). Strike

I
le wedge firmly with a mallet. If nothing happens,
?ply the wedge to the other side of the ferrule and
:peat. The handle should knock off fairly easily.
eware, again, that if you are too enthusiastic the
andle can diseryagr [run the tang suddenly and
r
L
-%
%

~ k eflight across the workshop. Using an actual Fig 3.35 Probkms in removing the handle may arise when
rewdrlver for thls purpose can damage the ferrule, the shoulder a very tight to the femle
h ~ c his normally only made of soft brass

Sometimes warming and drying the handle a little

with a hair dryer causes it to expand sufficiently to
release the tane.

If all else fails -say with an old tool where it is cer-

tain the tang has corroded and practically bonded
with the wood - the handle has to be sacrificed. First
use a hacksaw and pliers to remove the ferrule, saw-
ing diagonally along its length. Grip the blade in the
vice by the shank, with the shoulders resting on the
jaws and the handle straight up. Split the handle from
F ,trig a wedge of hardwood to knock c the top end using one of your second-best chisels.
thr imrwu. ileep your hand clear of the cutting eagc The wood can then be pared away to reveal the tang.
 -

WOQDCARVINQ TOOLS. MATERIALS & EQUIPMENT

FINISH to mark both s~desof the h d l e with a single shqc

mike using a hammer.
Name -8 (Fig 337) are avatlable by mail
Smoorh the handle with h e sandpaper so ir feels well order frcim anurnher of suppliers; look fixtheit adver-
in the hand Sandpaper~ngand blltntshing with tisements in the wadworking magazines.
anather piece ofthe s m e wood, or m d ~ h a v i ~U.s ,
an adequate fi&h in itself,
A coat of vamish, cellulase lacquer, sanding sealer
or shellac- mbhed back wtch fine wire wool - can he
used to seal the wood; thrs can be done on the larhe.
Th~ck,heavy varnish should be avoided, % it
becomes unmmfmabk and slippery when rhe hands
arc: warm. It is not necessarg to wax the handles as, if
frequently used, the wood namaUy becomes bur-
nished and aequires tts own patina. Bought handles
which we already glosdy varnished can be rubb'ed
back to the wood with s~ridpapetand refinished.
If woodcarvrng tools are unused for some time, a
light wipe wrth limed oil (raw) mrhe handles will
take care of the wwoodj but be aware that this may
encoutage mould growth if the tools are scored in
damp conditions.
Soaking rhe end of the handle overnight in
varnish or t h i i e d PVA (polymnyl acetate) glue -
which penetrates rhe end fibres - h d p ~to k c m e
the resistance of the wood to damage end spliet~ng
when it is hit with a mallet. Ch the other hand, there
may be a danger of skm semiiTivity with handlmg-

NAME PUNCHES
It $8 IIM a bad idm to stamp your name on your roo1
handles, or m some way mark them personally. If you
have acquired old gouges and chiseb and rntend to
continue using the handles, then you can add your
name to any already stamped on. There b a great
serw of tanttnuiw, seeing took passed though several
haads and being aware of tonract with a carvet who
may be long dead.
Support the handle m a V.+haped trough af wood -

to s o p it rolZ~ng(Fig3.36). Line up the punch and my Fig 3.37 Hame punches

 CORRECTION

To Identify the kmds of faults whlch are most

commonly found in carving tools
To suggest ways of correcting those faults which can
be corrected

L
A 'fault' in a carving tool may be defined as anything At the risk of producrng anecdotal ev~dence,I started
that interferes wlth its workmg effic~ency.T h ~ might
s carvlng with a dozen tools, but m a few months I had
include, among other things, the carbon steel being burlt up a 1u;t of tools that I could usefully carve with.
of mferior quahty - perhaps wlth unsatisfactory edge- I duly sent off an order for about 40 tools to a re-
keeprng ablhty from the or~gmaltempering; Incorrect putable firm (but one whlch can remaln anonymous).
forging of the shape; or a poorly fining handle. Faults When I examlned the tools, I found that I needed to
may also include poor sharpenmg b u t more of that send back nearly half of them; d~str~buted among
in Part 11. these tools were all the fauIts which w ~ lbel dealt w ~ t h
Some varlatlon ~n quahty may not be seen as a below. The steel and edge-holding properties them-
fault. And faults may, or may not, be someth~ngyou selves were excellent, but the shaping of the blades
wish to correct - some matter more than others. I am was unacceptable. The tools had been carelessly made
suggesting here that a crltlcal look should be taken at and should not have passed the factory inspection.
your carving tools to see d there is any way of improv- Out of the tools I was sent as replacements, I had to
mg their performance or feel; or even how they may return another six.. .
be made more attractive to use. The faults which follow have occurred both In my
Most often the fault lies in the actual shaping own tools and those of other carvers, and the reasons
of the tool when it was forged: in the blade, shank, they may be considered faults -the effect of the fault
shoulder and tang Some manufacturers consistently - will be glven. The questlon is whether the 'fault' or
produce superbly shaped carving tools; orhers, sadly, condition makes a difference to you as the user. Some
,, do nat. carvers do vely good work with tools I would have
 -

W O O D C A R V I N G TOOLS. MATERIALS & E Q U I P M E N T

considered faulted to a degree that would make me

want to do something about them
A WINDING BLADE
So, to some extent, it 1sa question of att~tude.The A wlndlng or twisted blade is a problem ma~nlyf o u k
approach I would like to promote in t h ~ book
s 1s one m tapered ch~selsand gouges - such as fishtails - mi
where manufacturers make tools to the best of then shortbent tools. The blade has been forged so that, Ii
ability and carvers love the tools w ~ t hwhlch they the edge IS looked at d~rectlyend-on, there 1s a degree
work, then quality and efficiency. of rotation or windlng around the true axis (Flg 4.1 ).
So, check over your tools, both old and new, as The resulting tool feels less certain, more 'self-
they axe acquired. Work through those that you have, conscious' m the hands than when the blade and edw
and gradually bring all your carvlng tools up to a level are al~gnedproperly to the square shank. The wmnd-
where you can justifiably be proud of them. But do mng must always be kept m mlnd and compensated for.
not be obsess~onalabout them they are a means to
- and the tool will l ~ n up
e inappropriately for setting-in
an end only. and finlshlng cuts.
If you do need to return a carving tool to the There is not much to be done without reheat=
retaller or manufacturer, polnt out the reason quietly and shapmng, although a bold approach would be tc
but assertively and there should be no probleA wlth attempt a cold reshapmng, using a vice and heaxr
getting a replacement; it is to be hoped that your grips. Th~s may be poss~ble,provlded the bend~ngis cc
comments are also helping the manufacturers be done In a soft, annealed part of the blade, such z
~mprovethe11products. the shank. Otherw~se,rf the shape 1s not acceptable
Starung with the blade, working through to the the tool will have to be returned.
tang- and then to the handle, here 1s a check hst of
some common faults, together wlth some notes on
what m~ghtbe done about them. Old and second-
ASYMMETRY
OF THE BLADE
hand tools have then own problems, and these mll be Here the blade, wlth or without wmnd~ng,benil-
dealt w ~ t hln Chapter 5 (pages 93-6). away to one s ~ d e(Fig 4.2). Agam, t h ~ sis more often.
but by no means always, to be found m tapered took-
If it 1s a small problem, a tapered gouge or chlsei
BLADES
STEEL QUALITY I
One of the advantages of not buying too many tools
of the same make at the beg~nn~ng is that a compari-
son of steels, through direct experience, 1s possible.
I
There is not much you can do yourself if the blade u
d~scoveredto have poor edge-holding quaht~es,other
than attempt to reharden and temper it. Thls process
IS explained In Volume 2, Chapter 3, and can often be
qulte successful.
I t IS also possible for a tool to have a 'soft spot'
whare ~tseems to lose its edge very quickly. Blueing
of the metal by over-aggress~vegr~nd~ng wlll produce

avoid this. can be seen m poorly forged shortbent tools

74
 CARVING-TOOL FAULTS AND T H E I R CORRECTION

-
I
!
7
<
L
Fig 4.2 Asymmetry m a fshtud chzsel (above) and a parhng wol (below)

may be ground back to symmetry - w ~ t hsome loss

of useful life - or a cold bend attempted. But, for
the most part, any significantly asymmetrical tool '
should be retunled.

UNEVENNESS
OF METAL
THICKNESS
When the blade ~s forged by hand or machtne from
the hot metal blank, the red-hot metal is placed in
one (concave) half of a former and hammered wtth a
match~ng(convex) shape the result is a particular
-

shape and sweep of blade.

If the two parts of the former have been accurately
lined up, the sweep w~llhave an even wall thickness
across the width. The cannel (the Inside curve or
V-groove) will also line up ~~rnrnetr~cally along the
axls and not wander, or be offset, to one s~de.

may pass from the factory to the point of sale without when the in-tunnel.~
forming block is m i.q.l, i ~ e d
being removed by quality controls (Figs 4.3 and 4.4).
If the metal of the wall is of uneven thickness, it
becomes very d~fficultto set the bevel correctly or
sharpen the edge evenly. The edge towards one s~de,
being th~ckerthan the other, will need a longer bevel
to get the same cuttlng angle (Fig 4.5).

Another problem with the V-tool is when particularly Fig 4.4 Differences m rhlckness between the walls of a
thick metal is left by the maker along the junct~onof wtool make rherr equal shaQenig d~fFcult
 W O O D C A R V l N G TOOLS M ATERIALS & E Q U I P M E N T

Bad alignment of the camel, so that it is not paralit:

to the axis of the blade, can have the same effect c r
a V-tool (Fig 4.6) This makes the sharpening
unhappy experience, but is Iess of a problem b
uneven wall thickness.

BENT TOOLS
Bent tools are bent for one purpose only: to ena&
the carver to get into recesses where the straight t a a i
have difficulties.The principle is: bend the blade iur-
ther and get in deeper. You will find a range of be&
being offered by manufacturers, and a range of d e b
itions of what a ' b e d is.
With so many tools ordered by post today, to&
are often only seen as drawings or photographs in GC-
alogues and are not actually handled before purch-
They can arrive lookmg quite differenc from what w a s
View from beneath, showing bevels expected. Two tools of the same width and sweep
from the same manufacturer, may have dissimilar
bends. Some manufacturers make spoonbit gouge
Fig 4.5 To achieve the same angle on each szde of a partzng with such a shallow bend that the tools offer lit&
tool wtth uneven wall thzcknessess, the bevels always end up advantage over the straight versions.
hfereiu kngths What matters is how useful the shape of a carving
tool is to you - as the carver actually using it. Shallow
the two s~des,as a precaution against the tool bends have their place, as in working shallow back-
cracklng at this polnt when it is bent in the forgmg. grounds (grounding), but deeper bends are also need&
It may be possible to reduce the wall thickness to an - and when you order one, a deep bend is what ym
acceptable level of evenness by grinding; othenvlse, should get. If what you have received is unacceptable
replacement is the only optlon. return the tool with a note of the problem; if there is

A .d 4.6 Poor alignment of the in-cannel with the L~.r

-;the blode again p."-.-2s urn.-.. -all thickness

76
 - C A R V I N G - T O O L FAULTS A N D T H E I R C O R R E C T I O N

SHOULDERS

INAPPROPRIATE
SIZE OF
SHOULDER
Shoulders, or bolsters, can be filed or ground down
if they are too large. Too small a shoulder - more
of a protuberance than a shoulder - may be forced
into the wood by mallet blows. If the tool is for
light work only, for all practical purposes this will
probably not be a problem. For heavier work, this
state of the shoulder is unacceptable and the tool
should be replaced.

ROUNDED
FACE
The face is the surface of the shoulder in contact with
Fig 4.7 You cannot cold-bend the hardened part of a blade, the handle. It should be flat and sit tight against the
however misaligned, without this happening end of the wooden handle (Fig 4.8). If the face is
badly rounded, not only will there be a gap between
no improvement, try another maker. Do not attempt the shoulder and the wood - which is uncomfortable
to change the shape by cold bending, as the relevant to hold - but there is a danger of the metal being

-
part of the blade is too near the area of tempered forced further into the wood and splitting it, especially
metal and is liable to fracture (Fig 4.7). if there is no femle on the handle. If the face of
the shoulder is not truly flat, it is easier to make the
BLADESUREACE handle look as if it is fitting properly.

Some makers take a lot of trouble to polish up the sur-

faces of their tools to make them attractive. Others
leave the outer faces with the rough, black, oily
surface resulting from quenching the hot metal,
and only polish the inside to show the straw colour
caused by the tempering. New, polished tools are
often protected from damp by being given an oily,
.-
or greasy, coating.
Oily surfaces on carving tools are more of an irri-
tation than a problem, as there is a tendency for the
grease or black oil to get on to the work via the hands.
Rub the blade with a degreaser like paraffin
(kerosene) until no more oil comes off. Fine emery
paper can be used on the more dense black finishes, as
well as to smooth off sharp comers and edges along -
the length of the blade. Fig 4.8 Some faults with shoulders: (a) unevenly
For pitting and roughness of the surface, see the distributed around the blark; (b) rounded face; [ c )
section on second-hand tools in Chapter 5 (page 95). misshapen altogether

77
 W O O D C A R V I N G TOOLS. MATERIALS & EQUIPMENT
- -2

To create a flat face on the underside of the shoulder, The tang may have been bent in the original making. h
grip the blade in a vice (preferably a metalworking or afterwards by rough use. It is still possible to align h?
vice) with the tang pointing upwards and the shoul- the handle by boring the hole at a cornpensatin?
der resting on the jaws. Take a washer which has a angle (Fig 4.10) i n effect, compensating errors b u r uoler'
hole slightly larger than the diameter of the shoulder, this is not easy to get right. I t is far better for the tang me
and drop it over the tang so that it rests on the vice. to be straight in the first place. d
More than one washer may be needed. Adjust the An angled tang can often be straightened by cold a=
shoulder of the tool so that its face stands out a little bending. The blade should be gripped in the vice E
proud of the hole, with the tang perpendicular to the described for flattening the bottom of the shoulder.
washer. With the washer acting as a jig, a file can now and tapped gently with a hammer, working from the
IN
be used to flatten the face of the shoulder (Fig 4.9), shoulder end. Remember that a tang - or any metal - -
km
creating a true face to sit on the wood of the handle. will not take much bending backwards and forwards =' +
Take care when filing not to bite into the tang. before it weakens. scze
If cold bending feels risky, use a gas torch to heai dk~
the tang up to dull red and then bend it. While you &BE

TANGS are doing this, protect the blade itself from the effect. 2 ~
of the heat by wrapping it in a wet rag. 3
If the tang is of adequate bulk, and length, grind- &
TANGNOT IN LINE WITH THE ing and filing is also an option.
BLADE
To get a blade dead in line with the handle, the
TANGPARALLEL TO
LINE BUT OFFSET
CENTRE , ir
I

tang must be on the central axis of the blade. The

consequences of a bent tang have been discussed in This is a problem created in the initial forging, and is
Chapter 2 (page 50). at its worst when the shoulder overhangs the ferrule.

- -- - II

Fig 4.9 A file and

washers can be wed to
fitten the face of the
shoulder so hat it seats well
on the handle

78
&
i
 - C A R V I N G - T O O L FAULTS A N D T H E I R C O R R E C T I O N

Proper fitting of the blade along the true axls becomes tang; otherwise you wlll have to knock off the handle
impossible. to have a look. Send the tool back if it IS a new one.
Options for deallng with this problem Ile in grmnd- If the tang 1s corroded as it may be ~nan old tool
-

ing and filing the tang lnto the central axls - d there - a few more optlons are descrrbed in the next chap-
is enough metal m it. If not, consrder offsett~ngor ter (pages 95-6).
packlng the hole m the handle. Otherwise, rf you do
not want to live w ~ t hit, send the tool back
HANDLES
INAPPROPRIATE
SIZE OF TANG
I
It may seem obvious that a large gouge needs a large
I rang to fit strongly into the handle, and that other
sizes of blade need an approprlate amount of tang But For either of these condirions it is best to make a new
the first you may know about a tang be~ngtoo small 1s hole. Plug the old one with a dowel of the same size -
the handle bend~ngabout the shoulder. It i s more and the same wood if possible - gluing and tapping it
often a problem wlth larger tools. in. Find the position for the new hole by lining up
I If you are making your own handles, you w~llbuy both ends of the handle between centre points, and
I the tool unhandled and can ~mmed~ately lnspect the rotating i t An oversize or offset hole can also he
I packed to the side with slivers of wood.

Look at whether the sue of the handle 1s too small

\!
or too large; whether the shape is what you want;
whether the wood is approprlate for the use of
the tool; and whether a ferrule IS needed at the tang
end, or another to protect the handle end agarnst

To some extent, if there IS wood to spare, handles

can he remade. If not, it may be a case of makrng
an entirely new handle, keep~ngthe old one for a

I I'
mentioned prev~ously,some manufacturers cover
~ t thlck
h vam~sh.T h ~ IS
s not a pleas-
ant surface compared wlth thmnner, less glossy finishes.
Vamlsh hke this can be removed wlth fine sandpaper
L
or palnt stripper (followed by washing), after whlch
the handle can he hum~shedwrth another plece of

- wood. Wipe over the surface occas~onallywlth a llttle

lrnseed 011, or seal it wlth a thln coat of shellac or
Fig 4.10 W h e n the tang i s mmsaligned, a compensanng vam~sh,rubbed back w ~ t hfine wlre wool. The best
hrectton of hok m the handle enables the blade to be hned up fin~shand patina comes from the effect of bemg regu-
correctly along the a n s of the tool larly used in the hand.
 CHAPTER FIVE

SELECTING AND
BUYING
WOODCARVING TOOLS

To explore the funct~onsof the various tradinonal

tool shapes
To advise on chooslng your first set of carving tools
To consider the specral problems involved in buying
second-hand tools

S HNE AND FUNCTION guide, but should help you decide what tools you need
for the work you have in mind. In the following sec-
tion is an approach to buying the tools you need tc
The subject of woodcarvtng itself (that is, how to start carving.
carve) is not the principal theme of this book - One point to remember is that when a carver
although ~nformationabout carving will tnevttably is working, carvlng as such is only taking placr
suffuse it. Carving as such 1s covered m more detail in when the tool is actually cutting the wood. So t b
my other books. more 'down time' (that is, time sorring out a n o b
For the newcomer to woodcarvmng, it is not just tool to use), the slower and more mrregular the paw
the choice of cawing tools that i s bennldering, but of working. In trade carving on a number of repeat
the fact that betng able to choose the right tools items, or in lettering, a rhythm 1s built up aft=
means knowmg, at least to some extent, what to do a while; the order in which each tool is used E
w ~ t them.
h What carving ch~selsand gouges are m an established and refined so that maxlmum effic~encr
academlc sense is fairly straightforward, but how does is ach~eved.The cuts proceed in a set order a d
one actually we them? The follow~n~ information is the down tlme is teduced to a min~mum- and the
lncluded as a br~efgu~deto newcomers to the craft. In resulting work appears as swiftly as possible, wtth a
thrs section are some pointers to the functions of the uniform appearance.
various carvlng tool 'famihes' and whar they can be When a one-offpiece is being carved, the down
expected ro do. Thts is by no means an exhaustive rime is kept as low as posslble in a different war.
 SELECTING AND B U Y I N G WOODCARVING TOOLS

The carver uses the tool in his or her hand for as long Some gu~delinesfor newcomers follow, describing
as possible and makes the one tool do the work of sev- what you may expect each particular family of wood-
eral others - not putting the tool down until another carvmg tools to do.
is really necessary. Against this, though, it should be
said that there is a danger of making the work look
uninteresting by using the same cut too often; the
more variety in the tool cuts themselves, the more To begin with the obvious: firmer chisels are used
lively the resulting surface may be (Fig 5.1). There is when straight lines are needed - as in cutting letters
a creative balance to be stmck. or setting in straight edges. Lettering may need a wide
So the functions of individual tools are not com- range of chisel sizes to cut the varying lengths of
pletely fixed and static. One gouge can be made to uprights, diagonals and horizontals. (Figs 5.2 and 5.3)
perform functions more naturally ascribed to another, Use chisels for working over lightly convex areas to
;md the normal 'brief' of each tool is to some extent produce a finished surface; if they are presented in a
ffexible. But there are also times when you must have slicing or skewed fashion, they will also trim the out-
one particular tool for the work at hand, and no other, side edges of curves. The chisel is not normally used
will substitute. to form wide, flat surfaces, such as the background of
a relief carving, because
the comers of the chisel
would tend to dig in and
leave unsightly 'tram-
lines' on the surface. For
this reason the flat gouge
is preferred, even though
the surface it produces is
slightly undulating and
only approximately flat.

Fig 5.1 A variety of tool

cuts, depths, open and filled
spaces and rhythms are used
in this detail from

I Riemenschneider's
Crucifixion altar in
Detwang, outside

I Rothenhr~an thr Tauber.

Germany. Many of the
tools that were u e d are
ckarly apparent
 SELECTlNG AND BUYING WOODCARVlNG TOOLS

Fig 5.5 A good way to

snap the point o f a skew
chisel is to rock it from side
to side while it is embedded
in the wood

curved edges. It will shape the comers and edges of ISthe preferable cuttmg edge - the comers are free of
grooves left by a V-tool. Thls produces a very flat the wood throughout the cut, and there is less ten-
rehef; used in t h way,
~ ~ the skew 1s quite a del~cate dency for them to tear the fibres compared wlth a flat
tool. It can also smooth l~ghtlyconvex surfaces, giv- ch~sel.The amount of bend In the grounding tool (or
mg more of a sllcing cut than the square firmer. any bent tool) dictates how much it can be used, in
Remember that the longer the pomt of the skew what circumstances, and how well the cutting edge
chisel, the more fragile it is. If the point is rocked can get into an appropriate position to cut.
from side to side when it is sunk in the wood, it is very Shortbent chisels can also undercut in other con-
liahle to snap off ana remain embedded (Fig 5.5). texts, and can clean grain where straight tools cannot
reach. Use them to chamfer or clean the insides of
SHORTBENTCHISELS curves, as, for example, in Gothic tracery.
(GROUNDERS)
A grounding tool or grounder is primarily concerned
with finishing the backgrounds in relief carving (Fig These tools, sometimes called comer grounders, can
5.6). Grounding describes the deeper, flat-bottomed get into recesses and comers where square-ended
cutting that is needed to sink a background. tools cannot reach. They come lnto thelr own where
A grounder may be a shortbent chisel, or a short- undercuttmg has been created and deep corners need
bent gouge of the flattest sweep. The flat gouge profile to be got at.

Fig 5.6 A small grounder

works the back,gound flat
~na relief cawing

---
The skewrng of the edge m relat~onto the rest of the
tool can be to the right or the left - one reaching
where the other cannot, or where the grain needs a
particular directLon of cut. As both directions
tnevicably need to be cut at some trine or anorhet, buy
them as a matching pair. Shorthent comer chisels are
the sort of tool chat may not be used very often, but
when they are needed it is because nothing eke wrll do.

SPLAYEDCHISELS
(FISHTAILOR SPADE TOOLS)
The spade or fishtad versron of any tool gtves two
extra benefits over +he parallel-s~dedform-.
* The comers bec~memore prominent, aIlowmgr
- normally
cuts to continue into awles
rnaccessible to the parallel tool. For example, use
fishtad chisels to cut the flat ends of serifs in
lettering.
These splayed toole are much lighter than the l a lot of fi;
Fig 5,7 Simple g r o o ~-.A~ ~the V-tool w ~ laid
strarght tools - they fee1 more 'dextrous' and so to subjects such haw m folmge
are wed mainly ?or fintshing work: for example,
tn smoothing rounded surfaces. h relief carving, much preliminary work involves
outlining and defintng an area ro be blocked out (Fi
There is a cost to these benefits, however. the cutting 5.9). The V-tool is indfspensablehere, and its alter-
edge loses its width w~thsharpening and these blades native name of 'partmg tool' suggests thls use. If the
have a shorter working life than paralld-s~dedones. too1 is ttlted to one side, a degree of slmple undercut-
For this reason, and because of their lightness, they trng rs possible, for example under catved leaves.
are unsuitable for rough work. Keep these splayed
took for the lighter, final stages of carving, allowing
other tools to take the brunt of the preiiminary work.

These very useful tools are made w ~ t hdifferent

angles, producing grooves or suaght-sided channels
6different degreesof 0pennec.s ((Figs 5.7 and 5.8).
Use the V-tool on its own to nin a shallow, decorat~ve
d 6nished groove in the d a c e of a carvmg, either
tm imise a design in a flat surface such as a bread
or to delrneate hair, feathers or leaves.
Cbrdering the edges of V-grooves creates a type
d low-relief carving. The tool can also be used
with special knives to produce carving, Fig 5.8 Afiontbent V-1001cleanmg the deepiy h h e d
a h n ofgeometrical surface decoratron. grooves between locks of hair
 SELECTlNG AND BUYING WSIODCARVlNG TOOLS

shallow, polished facets which can be worked over

the surface of the wood modelling, smoothing and
-

completing it (Figs 5.10 and 5.11).

Subject
In making a gouge cut, one principle is not to let
the comers dig in; this is why, as mentioned earlier,
the flat gouge is preferred to the chisel for finishing
flat surfaces. The middle part of the sweep cuts, but
the comers remain in the fresh air, slightly above the
H Clearing ground surface (Fig 5.12). (This is a different technique from
deliberately using one of the comers to make a slicing
cut in the manner of the skew chisel.) If the corners
of a gouge are buried in the wood during its cut, then
not only is some control lost, but the wood fibres are
tom, which produces a ragged surface. There is also

I Clearing ground

P
-- -

-
-
? -
,
sening in accurately
-
f-g
- - -
-~ ---+- . --
i

I
Fig 5.9 A W t w l em be wed to outLne a relief cmvfng in Fig 5.10 ( i u ~ c ~ gouges
er w ~ l leawe
l a pattern 01 aeep cuts
successive kuek to the requ~reddegth Agouge is wed to on a su*e
remeve the waste, and o d w gouges or chrsels to sec in to a
predetenzned line

The parallel-sided gouges, of all sweeps and sizes, are

the general carver's most called-upon tools. They are
ar work right from the start of a carvmg, with the pre-
lrminary roughing out, through to establishing the
main $oms and masses (bosnng m) and o n to the
final surface finishing. It may be helpful to elaborate a
little on how gouga ate used.
The 'quickerbrving tools do indeed remove I
wood in more bulk - and therefore more quickly - Fig 5.11 Fluttzr gouges dl reduce t h deep facets to a
than the flatter gouges. Flat gouges in turn produce smoother j h h
 W O O D C A R V I N G T O O L S . MATERIALS 6 E Q U I P M E N T

-
Corners beneath Corners free: fibres
suriace: fibres torn

-- - -/
-- --
--
~-
-
- - -
- - --
/
- --
- - -
- -
-
-~-
--
-
- - . -- - . - - --- -- -
-7-- ;- -. -- .. < -
Fig 5.12 Allowgng the corners of the gouge to dig rn will rear the wood fibres rnstead of cutnng them

the danger of breakmg an embedded tool. If deeper details may well be m the wrong place altogether.
cuts afe needed, select a deeper gouge. When the underlying form is established first, the
Another important use of the gouge involves detarls fall naturally mto place.
matching the particular sweep, or curve, of the cut- With the exception of the very deep gsuges, all
tlng edge preciseIy to a matchrng curve to be c& in gougjes give WJO cuts in addirion to the vertical stab-
the wood (Fig 5.U). Clean, precise shapes can be bingcut already described: one wlrh the tool enterlng
outltned in this way and accurately repeated; one the wood m the 'no~mal'fashion to give a concave
important applicailon of this technique is In c m m g
mouldings.
Setting in mnvolves outlining a mmn subject from
its sunroundinga, as when cutting away the back-
ground. Setting in uses rhe sweeps of carvlng rools in
a similar way to that mentioned above, and rhts is one
of the reasons why carvers build up large numbers of
caxvrng tools in different sweeps and sizes. The prin-
ciple of tool profiles matching the curves of the edges
belng cur also $rings clarity and a prec~sebeauty to
the carving of letters in wood.
The tern bosting in comes from the French
I
&huche~, meaning 'to sketch'. It describes that stage
in the carvmg process which is a little further into the
work than the prelimmary roughing out. It is used
when the main forms and masses are b a g d & n d or
'sketched in', What is berng sought are the prunay
planes, forms and movement of rhe work - the masses
and forms that underlie and support the final details.
A variety of stra~hghrgouges, often fartly flat, or even
chisel, are used extensively in thls vigorous stage.
Getting- &me ea& masses and moving -f~m correetlv
established is an exttemely mportant - if not the
most important - stage in a carvmng, There is a ten-
dency for beginnets to start work'mg the h a 1 details L bg 5-13 Matcbng UK wrae of th*!gouge to an exact
before the main body of form has been ezpressed. Not requirement to set m a c h , swe~pmgo&e; curved
only will those details wh~hrcbhave been carved too ekments in a caw~ngcan e&Ey be matched ly wing h e
early be cut away as the work progresses, but these same tool for each
 SELECTING A N D BUYING WOODCARVING TOOLS

Fig 5.14 G a q s can be used in e ~ h ar ' n o d (left) u r m 'ups&-down' posznon

cut, the o~herwit11 rile ruol rcvr,rscd ('ul.,iJc down').

wl>ich produces a cor1vt:x L U L (Figs 5.14 ;111,l 5.151.
St), in buying orlr irltl~cscrools, y.xr arc grtt111~
morc

I value than you thought for your money.

Flutets a d veiaefs, making deep cuts, grooves or

I
channels, can be used to produce decoranve work in
their own right (Fig 5.16). They will also create a
softer outline to a relief form than the V-tool can (Fig
5.17). An oblect, or area, can be faded or blended
more readily into the background if rt does not have
a hard junction where the two planes meet.
As a final note, there JS a dist~nctrtsk of U-shaped
gouges cracking if they are powerfully embedded m

Fig 5.15 The beads m

this o u carved modding
were cut w t h a gouge m
the ~euersedposrtion

Fig 5.16 Vaners wiU

p o k e a 'sojkr' cut than
the V-tool

87
 ,
W O O D C A R V I N G T O O L S . MATERIALS & E Q U I P M E N T - -

Fig 5.17 A softer ed@&

a relieved plane is a c h i d
with a deep gouge ( u e i m -
or fluter)

-
h

d@
I
squeezes
waliitogethei

. .
3-
A flat fishtail puge must haue helped clean the
central kaf into the comer i n this oid oak moulding

Splayed gouges are not suitable for heavy work, but

I

S1
am
hn
em

i.18 Sideways pressure is exe -like are excellent tools for finishing. Their lightness and &
-..-s of a U-shaped gouge, and if ...*.""...," ieeply in shape makes them easier to manipulate, as the>- @
the wood the walls may be squeezed together su ltly to obscure less wood; and their prominent comers will B
crack the metal run surfaces into sharper angles and recesses (Fig I r d
5.19). Fishtail fluters negotiate curves more easily
the wood; the outer bevels act as wedges to squeeze than the straight, parallel fluters; the blade following du
the walls of the gouge together (Fig 5.18).

-
through after the cutting edge has less tendency to
jam in the wood. Fishtail gouges have great value in 'k

SPLAYED GOUGES ( F I S H T A I L , lettering, for example curving end serifs. m

SPADE O R POD T O O L S )
What was said about spade and fishtail chisels applies
LONGBENTGOUGES
to these tools as well. Being thinner, the splayed The bend in these tools enables the gouge to enter
gouges are quicker and easier to sharpen than parallel- deeper recesses and hollows than a straight tool can Ed
sided gouges, and hold a finer edge. But for the same (Fig 5.20). Because the sweeps match, when the blade iia
reasons they are less economic, becoming slightly or handle of a straight gouge fouls the wood around I
narrower with each sharpening. a recess a simple change can be made to a similar P
I
88
I I
 SELECTING A N D BUYING WOODCARVING TOOLS

Fig 5.20 As the recess 1s deepened, the swa~ghttad wtil swt ro foul the edge. The same sweep and sm of toot in a curered
form unll make the cut wzthol~tfohng

curved gouge. Bent tool6 can only rarely be used

upside down.

SHORTBENTGOUGES
These wjll enrer vet deeuer hollows than the long-
bent gouges (Fig 5.21). The deepest hollows are
entered by the fllpst sharply cranked coals, whose
name - knuckle gouges - expresses their shape,
In practice, the handle of a shortbent gouge
ofren swings through a large arc to produce what 1s
quite a small cut. Make sure the cutting edge is trav-
elllng through the wood, and not just being levered
I
at the bend.
Shortbent gouges are used in high,relief carving
where the ground is sunk well back; in undercutting;
m pierced work, each as Gorhic tracery, working the
inner curves especially; and in modelling mternal
curves at any stage m a carving where the hollow 1s
more than a straight tool can cope w ~ t h

BACKBENTGOUGES I
Earlier, in reference to straight gouges, it was men- I
tioned that two types of cut can be made by praenting
the blade in different ways to the wood. A concave
groove or facet can be cut with the instde of the gouge
L
F&5.21 A deep hollow worked by a smallfimtbentgouge
 W O O D C A R V I N G TOOLS MATERIALS & E Q U I P M E N T

Fig 5.22 A strarght gouge

used 'upszde down' shapes I
a conwex surfme (top) A
backbent gouge (bottom)
u,~llnegonate a convex
profile where a stra~ght
gouge cannot reach

Facing upwards (the 'nght way up'). This type of cut

is the one normally associated wtth gouges; and long-
SELECTING AND
bent or shortbent gouges, as needed, w~lltake the ORDERING
carvmg mto deeper and deeper hollows.
The second way of cutting lnvolves reversing the ~ N THE G
CHOICE
tool so that the inside of the gouge pornts downwards
('upside down'), agalnst the wood. This presentauon The contents of Part I so far will have helped you gam
produces a rounded or convex cut (Ftg 5.22). Now, an understanding of the 'anatomy' of woodcarving
just as the longbent and shortbent corxhgurarions tools, how they work and whar might be done wrh
enable a gouge in the fixst position to enter hollom, them. But if you are starting off without any carving
so the backbent shape allows a s~milaraccess for a tools at all, there comes a point when you need to
gouge m the second, more difficult, reversed posiuon take the plunge and buy some. Which on=, and how
(Fig 5.23). many? Or what Lf you want to expand your range?
Here are some notes that might help you in makmg
your cho~ce.

Buy only a few carving tools t o start with

Time is needed to understand each tool as you carve,
so that you become famil~arw ~ t hit and discover what
t t can do for you. Time will also be needed to sharpen

i
the tools, whtch can be slow and ar tlmes frustrating
to begln with. O n the other hand, too few tools can
be hsu-atmg as well, and your work may be l ~ m ~ t e d
by not having the nght tools.
As a gtudelmne, around a dozen or so carefully
Fig 5.23 The backbent roo1 enters hollows m she upside. selected tools is a good startlng number. A suggested
dnmpusloon, shpzng a su$me which rs concave along I S ltst, with the reasonrng behind lt, 1s given m the table
length but convex JTon srck w ede on page 92.

90
-
S E L E C T l N G A N D BUYING W O O D C A R V I N G TOOLS

Base yuur choice on need Buy from reputable manufacturers

A t the start you may have no idea of what it is you Buy from well-established firms with a reputatcon to
want to carve -how b ~ git wlll be, or how complex. protect In the marketplace They wlll have useful lists
You will almost certarnly need more tools than you of their tools and addirional information available.
cnit~allybuy. The best approach whether you have
- It is particularly useful if they are uslng a standard
no carvlng tools or many is to Increase their num-
- numbemg system such as the Sheffield List, so that
ber as and when the need arises. you can refer between makes. Better still, if you are
Make the most use of what tools you have avail- able to Inspect the tools personally, take along an
able, and make a few notes as you go along. If you feel cmpresslon of the cuts of your present carvrng tools,
that a particular gouge would be r~ghtfor the job, if made by stabbcng the11 edges lnto a flat pcece of wood
only it were wlder, narrower, bent or shaped in some or cardboard. Wlth this cn hand, you can make a
way, you can use what has been sard earlier in thcs comparison between the sweeps you have at home,
chapter to define the difference you need accurately. the varlatlon of sweep or shape you want, and what 1s
on offer.
Use your gut feeling
Try warious makes to start with
Having sa~dthat the cho~ceof carving tools 1s best
decided ratconally - basing your need on prev~ous D~fferentmakers seem to have different strengths, for
experience - there is also a place for a more lntultive example in the bends of thelr tools, the thickness of
approach, espec~all~ if you do not know what you metal or the finish. Some makes of tool are more
actuaIly want to carve. So cf you see a carvlng tool attractive to some mdlvlduals But before settling
that 'grabs you', or fills your head wcth Ideas of what mto the well-known rut of 'brand loyalty3,do t q out
~
m ~ g hbe
t done, or that you can feel and see yourself different makes. It 1s worth experlmentlng this way
usmng, then the chances are that your heart is speak- even if you have qulte a few rools already.
mg to you, and you should listen.
Avoid boxed sets
SELECTINGTHE TOOLS This IS the way many people start. a boxed set of
woodcarving tools grven as a Christmas or birthday
At the start, you need to make some decision as to
present. This can work out well, but equally often,
what tools to buy. A t the rcsk of duplicating what has
does not. The glver wlll usually be unaware of the
been said earlier, here are some guidelines:
qualcty of the tools, and may have bought some of
the cheaper tools to be found on market stalls. Even
Avoid cheap tools
when the quality 1s excellent, the cholce of tools has
Cheap tools are almost always made of poor steel, been made by other people: firstly by the manufacturer
badly tempered and incapable of holdlng an edge for and secondly by the giver of the set. Poor quality, or
long - even if they have been poltshed up to look poor selection, can cause a lot of frustration and,
smart. They are often shorter than usual, with cheap sadly, has been known to put people off carving r~ght
looklng ferrules. from the start.
Expense is relative. Top-quality carving tools may The chocce of tools 1s a very personal issue, as
appear expensive, but they are meant for a l~fetime's has been stressed before. In effect, the tool kct grows
use. Through them you may have years of pleasure wlth the carver. However, rf you already have a boxed
and creativity, and perhaps even earn your llving. If set, do not despalr: they may be exactly what you
there is stdl any doubt as to the value of carving tools, need. If they are not what you need at the moment,
cons~derthe relative cost of a few hours at h e c~nema, but they are good-qual~tytools, sooner or later you
eating out, or settlng up in other crafts. will use them.
 WOODCARVING TOOLS. MATERIALS & E Q U I P M E N T

Inspect the tools Eventually, you will know yourself the work to whi&
you are inclined the scale, size and degree of d e t d
-
Use the lnformatron given in Part I -and summar~ed
Perhaps it will be lettering or wildlife, huge bowls cr
In the next section on second-hand tools (pages 9 3 4 )
duck decoys, abstract sculpture or netsuke.
- to check over your tools for faults when you buy
What you must do is start - w ~ t hsomethmg, an\-
them. There is no reason to accept substandard tools
thrng - but start. Problems then become sornethw
when by returnmg them you should get the qual~ry
to get your teeth Into. And this 1s also a good way KC
you are paying for. O n the contrary, by keeping man-
see your first carvmg as well. It 1s easy to worry about
ufacturers on the~rtoes w ~ t hyour d~scnmmation,
d~fferentaspects of what you want to do before y m
carvzng as a whole is belng done a long-term service.
have started carvmng. Once you get gomg, you haxe
experience to learn from, and what previously seemed
A SUGGESTED STARTING KIT d~fficultbecomes tanglble and approachable.
The tools I suggest you buy are lrsted in the table
Hav~nglust spent the last few paragraphs suggesting
below, where the numbers refer to the Sheffield L ~ s t
that other people should not be allowed to make
decis~onsabout the carvlng tools you need, t h ~ sectton
s
may seem a little out of place. However, my experience
has shown me that although a beglnner may under-
stand all rhat has been s a ~ dso far about woodcarving
tools -about quality, the different shapes, what they No. W&h Description
do, and so on - there can still be an Initla1 lack of [in) (4
confidence when it comes to buying some to start
% 10
- Skew (comer) chisel
with. This is not such a surprise, as confidence w~ll
only really begin when you actually lay your hands on Yi 6 Flat gouge (straight)
the tools and start using them.
The following tool selection 1s based on several K 13 - Flat gouge (straight)
things: my teachlng experience, both private and m % 19 Flat gouge (stra~ght)
adult education; discuss~onsw ~ t hother carvers; what
I started with; and what tools are on my bench more Yi 6 Medium gouge (straight]
often than any others. My i n ~ t ~selection
al of carving K 13 Medium gouge (scra~ght)
tools should be sufficient to perform basrc, useful
functions From here onwards, acqulre tools by work- % 19 Medium gouge (stra~&t)
ing out your own needs % 6 Quick gouge (straight)
Bear in m ~ n dthat any book on woodcarv~ngwlll
give you a different set of tools wrth which to begrn. X 13 Quick gouge (stra~ght)
There are at least three reasons for this: % 19 Quick gouge (straight)
the apparent vastness of chorce among carving 3 10 vtool (parhng tool)
tools and makes
the wide-open field that IS carvmg design, with
different projects requir~ngdrfferent tools or Consider also buy~ngthe following tools:
approaches right and left shortbent skew chisels, %in (3mm)
the unique preferences, not to say prejudices,
large fluter and small velner
that individuals (including myself) have about
what we like and what we think is right - about bent and fishtall tools m any of these sweeps
anything, never mind carving tools! and sizes.
-

S E L E C T I N G AND B U Y I N G WOODCARVING TOOLS

You may also wish to make some variatrons, accordmg Keep an accurate record of your order
to your particular Interests as a woodcarver
Mark the sweeps of the tools you have sent for, and
the date you sent the order. You can record the exact
LARGE-SCAIE SCULPTURE
shapes of your exlstmg blades by pressing them Into a
You may find that the smallest tool you need is l m
board of thm wood; t t is then easy to compare these
(25mm), going up to approximately lKln (38mm). It
impressions with what the manufacturers are offermg.
is possrble to buy 2in (50mm) tools, but in practice
they require a lot of effort with the mallet. In the long
Check w e r the cawing tools when they arrive
term the smaller tools, while apparently slower, are
less tlring to use, and eventually more work is First, see that the sizes and shapes are exactly what
achieved wlth the same effort. you expected. Secondly, inspect for faults and prob-
lems using the lnformat~onm Chapter 4. Decide
MINIATURE CARVING whether any fault is something you can deal with
The shapes above are sttll more than likely to be slmply or not; return any unacceptable tools, with a
needed, but in thls case the range is reduced in size. polite explanation, asking for a replacement.
Most of the tools might be around %m (6mm) Bnd
below, though a few larger ones will still be needed Perhaps I am grving the ImpressLon that faults m
woodcarving tools are common; they are more com-
LETTERING mon than mlght be expected. Fortunately, toolmakers
Lettering requires more stra~ghtch~sels- if not a full have been ~mprovingthen qualtty as the market
range m small increments - as straight lines are a grows and the competition increases. My main reason
prominent feature in many styles of lettermg. The for giving information on faults or problems ts to save
curves of the letters will need to be matched to you being at a loss when they occur, by lnformtng you
some extent, and fishtail gouges and chtsels will be of what sorts of remedles are possible
used for the serifs. For detailed informauon, see my
Lettercawmng in Wood: A Practical Course (GMC Pub-
licatuns, 1997) .
Because of the mcreasmg interest both m carvlng itself
MISCELLANEOUS and old tools in general, second-hand carving tools
Other interests such as v~olm-makingor carving duck are not as common as they used to be - nor are they
decoys suggest their own requirements curves to necessarily cheaper than thetr new equivalents. How-
match the scroll of the vrolm, or fine veiners and ever, they still crop up in markets, second-hand tool
V-tools for featherwork. shops, car-boot sales and so on, and are worth looklng
out for. Once people h o w of your interest in carvmg,
you may well find that you are given tools and wood
There 1s a welcome feelmg today that it is reprehen-
Today, ever larger numbers of carvlng tools are
sible to waste such assets. So you may well acquire
bought through the post; often r t is not possible to
some old tools, and w ~ t hluck they will bear such
see and handle woodcmmg tools locally You wlll,
illustrious names as Addis & Sons, Herrmg Bros. or
therefore, need a good idea of what tools you want.
Ward & Payne.
With a new tool you can be reasonably sure of its
Get hold of catalogue information
shape, stze, quality and so on, but these old tools can
Good manufacturers and suppliers readily distr~bute have certarn ~roblemsthat actuallv make them less
theu catalogues. Study them and check that then than attractive propositions. It is these problems that
particular numbering system corncides wlth what you will be dealt with in t h ~ sectlon,
s thus helping you to
want and what you expect to receive make an rnformed decisron as to their worth to you as
 W O O D C A R V I N G TOOLS, MATERIALS & E Q U I P M E N T

a carver. Unless you like collectmg these old tools,

do not buy a tool merely because it LS old. Revlvlng
older woodcarving tools and putting them back lnto
successful service, however, can be a very s?tisfylng

1
1
undertakmg
Bear m mind all t h a ~has been said previously
about assessing new carving tools these observa-

m
h
-

tions can be applied to old tools as well. In addition,

the following pornrs should be looked at:

LENGTH OF BLADE
It is a fact that the most useful tools are those that Fig 5.25 The ol& fishtail tool at the top stated llfe abour
wear down qulckest because of continual sharpenmg. the size of the lower one
Therefore, ~t 1s often the case that the blades of
the most useful-looking old woodcarving tools are it w~llbe reborn as something for openmg paint tlni
considerably reduced m length. Not all of a blade is or maklng holes.
tempered for cuttmg wood - a secnon towards the Heavlly used tools can therefore present two
handle is left softer and more resihent Whether a serlous problems:
carving gouge has worn beyond the tempered steel, or
They may n o longer have any useful temper or
not, can only really be assessed by uslng it. (Soft
hardness, makmg it impossible for them to hold
metal can be rerempered see Volume 2, Chapter 3.)
an edge.
Some tools, such as parallel-srded gouges, can
take a lot of sharpenmg, and thus shortening, in thelr The shape may be so shortened that it 1s no
stride. If they become lnconvenlently short, a longer longer of any use
handle will solve the problem (Fig 5.24). Wlth other
tools - fishtail and shortbent carvmg tools, for
example - the effect of sharpening can be seen more
quickly (Figs- 5.25 and 5.26). The effecrrve life of such
tools is shorter, as it takes far less time to reduce the
blade beyond its useful shape or workable hardness.
When a carving tool 1s no longer useful for carvmg,

Fig 5.24 Short took can be brought back into circculation worn back considerubly compared with the somewhat newer
with handles of extva length tool on the right
-
SELECTING A N D BUYING W O O D C A R V I N G TOOLS -

The cure for both these problems 1s heat treatment:

either retemperlng or reshaping, as described in
Volume 2, Chapter 3. Assummg the steel IS good
quahty, and you are w~llingto take the tlme and
trouble, there is no reason why such tools cannot be
usefully reborn w~thinthe realms of carvmg.

RUST
The effect of storage m a damp place - unfortunately
the lot of many old tools is corrosion of the metal
-

parts. The Iron, taken or~ginallyout of the earth

as Iron ore, is naturally returning to its stabIe
compound, ferrous ox~de.Corros~onappears as smaller
or larger areas of pitting or flak~ngIn the surface. Fig 5.28 A badly rusted su&ce on a gouge blade, but not
In second-hand shops, tools are often glven a wipe pitted enough to d e c t & cumng edge, whtch ltes more
of 011 to inhibit the corrosion, so the rust will nbt towards the centre of the steel
' necessar~l~ look redd~sh-brown;it may appear dirty
black mstead. bevel - so, agam, pltting of a gouge blade may easily
The extent and, more importantly, the depth of be overcome (see Chapter 9, pages 136410).
, pitting has to be assessed. Because carving tools have If theplttmg is so deep that it appears in the cuttmg
I bevels usually both on the ~nsldeand the outside
- - edge when the blade is sharpened, the effect is to
/ the actual cuttlng part of the steel a within the blade. leave a scratch m the wood. This 1s not acceptable for
Take, for example, a carver's firmer ch~selw ~ t hequal work wh~chis to be left straight from the tool and not
bevels on both sides, where the cutting edge is formed sanded. A tool may be worth grmding back, beyond

iiin the very middle of the blade; only very severe

corrosion would reach this far in (Fig 5 27). Although
a blade may look corroded, the pomt IS that if, after
sharpening, the actual cutting edge is free from pits,
part~cularlybad pitting. The metal can be cleaned up
with small grindmg wheels (such as those fitted to
power drills), sl~pand bench stones, and grades of
emery paper. Certa~nlythe tool can be soaked in oil
there will be no marks or scratches m the wood or an anti-rusting agent to prevent further damage.
followrng its cut. Effectively the tool is as good as
new (Fig 5.28). RUSTED TANGS
W ~ t hgouges, the amount of bevel set on the inner Corrosion affects the tangs of old tools as well as ?he
surface varies dependmg on the tool and how it 1s blades. If the blade of a carving tool with a handle is
used. It does no harm to go beyond any pittlng on affected by damp in t h ~ way,
s assume at least a s~milar
the ~nsideby forming a longer than normal lnner effect on the tang. The handle may protect the tang

-
Rust pitting
I
/ Depth
I Cutting \ of rust
edge

i
I
I
I Fig 5.27 Wzth a double or mstde beuel, rust prtting may not be deep enough to affect the acml cutnng edg
 WOODCARVlNG TOOLS MATERIALS & E Q U I P M E N T

3g 5.29 A new tang

may be ground cnto a bk&
where tk ortpal tang is
coraded. A washer wlth a
square hok wll act us a
Setviceable shoulder

Metal
washer

tang

Ftg 5.30 A gouge eohich

'lad bst utz tang &rough
L wt, now back in use

from moismre, bur equally the wood can hold mols-

ture m, and against the metal. Badly msted tangs may
appear as looseness of the handle - which may give
a suneptittous opportunity to inspect the tang.
The tang can be so badly corroded as to be thinned
almost to nothing - stopp~ngshort at the shoulder
and makrng the tool weak and liable to bend or break.
What is most important is the blade, as thls is
what does the cutting and finishes the sudace. The
rang 1s only a means of holding the blade, w ~ t hthe
help of the handle.
If the blade is usable, form a new rang by grinding loss of overall tool length can be made up by fitting a
one mm the metal in its normal posirioa, but of longer handle.
necessity closer to the wttmg edge (Ftg 5.29). Sub-
stitute for the shoulder (bolster) proper by gnnding BROKEN BLADES
two shoulders into the metal, and srating these on to This is usually to be seen where some sad old carving
a washer. Make the diameter of the washer that of the tool has already been used to open paint tiis or as a
ferrule, and file its hole square to take the new tang. screwdrtver.Judicious gtmding can sometimes salvage
Take care to grrnd the new tang in lme with the axts these blades, but be careful not to overheat the steel
of the tool and ro make it big enough; at the same and draw the temper. Remember that the steel is
time make the new shoulders square and m line. chicker towards the shank of the tool, so a longer
While gnnding, dip the blade m water or wrap it in a bevel is needed to get the cutring angle that is wanted.
wet mg to keep it cool. It does not matter if the tang Retempering the blade may also be necessary (see
iwIfheats up, as this needs to be softer anyway. Volume 2, Chapter 3).
This way of reinstating the tang works well (Fig Broken tangs may be approached in the same way
530). Because the blade is effectively shortened, the as badly rusted ones.
 CHAPTER S I X

INNOVATIONS IN
CARVING TOOLS

Human berngs are htghly creative; they can never This chapter describes a few mnovative and imported
leave the status quo alone for long. Thus m the woodcarvmg tools that are in the process of becoming
carving world today it IS exciting to see many new established. Interesting though rhey are, I would
ideas berng tried: new methods and ways of doing encourage you to become thoroughly famtllar with
things; new effects and th^e pushing of boundaries In convent~onaltools before experimenting with these
dalgn: and new technologies and metals meeting less familiar ones-
restless minds.
Some Ideas seem -to be just 'the tyranny of the
new' and marketing-leda Some are personal to a carver FLEXCUT CARVlNG
and will never see the light of day in the marketplace,
but mav be shared bemeen carvers. Others seem ro be
TOOLS
standing the test of tlme and are gaining popularity -
Flexcut tools are the bmmchild of canring instructor
carvers are actually using them, and this must be the
Rich Rymer and carver David Bennett, of Falls Run
provmng ~f a new roo1 is used for a short while rhen
Woodcarving Inc., Philadelphia, USA. These tools
left to moulder m a drawer for evermore, it cannot be
certainly ure an lnnovatton - a thorough overhaul of
caunced a success.
conventional carving tools - and a comparison mth
A&itionally, carving tools are now heg~nnltlgto
trad~tionaltypes is in some ways not so easy as might
appear m the West from other, previously disregarded,
seem at first sight They look quite different from con-
carving traditions, particularly that of C h w . I have
ventional carving tools, to begrn with: thin blades
mcluded them bere because they are unfamiliar
with unusually flat, flextble shanks and unique,
m the West - though they can certamly not be
'ergonom~c'handles.
described as 'mnovations', srnce China has a rich and
Flexcut carving tools are currently available in
distinguished history of woodcarving. These tools
three foms (Fig 6.1):
have been regarded with a ltttle suspicron at first, but
perhaps demand wrll grow as thar value to Western Palm tools: smaller than conventional tools, and
woodcarvers comes to be recogn~zed. with a handle firrug very comfortahl~into the
 W O O D C A R V I N G TOOLS. MATERIALS & E Q U I P M E N T

Fig 6.1 The three

vaneties of Fkxcut took
(from left). mallet gouge;
standard gouge; palm gouge

hand; far use in a me-hnded whtt'nf: fashion these novel tools. As with all twk, there are pros
(with rhe other hand support~rigthe workpiece), and cons, some of which have as much to da with
or for close wark in general. the background and amtude of the w e r as the
Sm&d took: more regular-length blades with tools themselves.
When Flexcut taols were first introduced, the flex-
proportionally larger handles; used m both hands
mg of the blade was a strong markeeng poinr: the
with the workpiece clamped in a vrce, say. This is
rdea was that the user could convert a sira~ghtgouge
the tool wtth the most flexible Blade.
a bent one by gres~ngdown on the handle LFrg
Mallet tools: the least flexible and most llke a 6.2). However, since the blade itself is stiif and only
regular w i n g tool, with ah octagonal (but srill the rear shank part can flex, the advantage over a
disunctively shaped) handle and large fermle; correcdy u j d strairrht gauge IS very small when tt
for use with a mallet tn largm projects or m
harder woods.

As h e tools became more popular, so the range

of widrhs and sweeps increases. The tools are high
qualitp and come welI sharpened mth a Aat bevel,
good cutring angle and stra~ghtcutring edge, but no
internal bevel.
These tools have gained great populariry in
the USA, part~cularlywith carves who favour a
somewhat cancatuted 'folk' style influenced by Scsa-
dinmian traditions. Perhaps American wvers ase
more open-minded than Europeans; this is not
a value judgement, but a poss~blereason why nadi- Fig 6 2 Exernng downward pesswra flexes & Jdakmd
tlonal carvers in the UK seem less enrhusiasuc about grves a smoptng mhon to rhe cut
 I N N O V A T I O N S I N CARVING TOOLS

mes to creating a hollow. In fact, I don't think this with a desire for traditional ornamental carving
IS the strong point of these tools at all. would find the range and style of conventional
The metal of the blades is thin - among the carving tools far more suitable; but for those with a
thinnest around - and well tempered. This gives a less tradit~onalapproach, or a style that emphasizes
sense of delicacy of touch, and the cutting edge passes cuts and facets, Flexcut tools would certainly be
through the wood easily. The handles are most worth exploring.
comfortable in a low-level, two-handed grip, and
those of the palm tools - which I have found useful
for undercutting w o r k extremely well.
The flexible blades feel very different from con-
THE RAY GONZALEZ
ventional tools, and some may find that pressing HOOKED SKEW CHISEL
down to make the flex feels unnatural. The flat metal
blade and oval-section handle may tend to dictate This tool, designed by the well-known British carver
how you manipulate the tool, compared with the uni- Ray Gonzalez, is made by Ashley Iles. It comes in two
form shank and handle of a conventional tool; and forms (Fig 6.3):
the shaped handle may feel less comfortable when the'
Short shaft: with a mushroom-shaped handle for
blade is offered 'upside down'. The mallet tools, not
holding in the palm, and principally for use with
having the flex, are much more like conventional
one hand in whittling fashion.
tools, and come in sizes large enough to be used in a
normal fashion, two-handed or with a mallet. Long shaft: with an octagonal handle, making a
My feeling is that Flexcut tools suit certain normal-length carving tool intended for use with
approaches to carving better than others. A newcomer both hands.

Fig 6.3 Gonzalez hooked

skew chisels: palm type
with mushroom handle,
and regular-size tool
 -WOODCARVING TOOLS. ATERIALS & EQUIPMENT

The narrow shaft is %in (4mm) wide and expands ever, this very th~nnessand delicacy means you muss
into a crescent-llke blade, avatlable m width of %m newer rock or wobble an embedded comer or edge from
(16mm) and %m(19mm). The cutting edge is curved, slde to side: it will easily snap.
formlng a crescent from comer to comer, and both
comers are hooked and avatlable for use, unlike a
normal skew chisel (Fig 6.4).
This tool can be used ra shce, groove or scr~beby Felt and cloth wheels will snag the hook, so powered
pushtng or pulling, just like a knife or a skew chwel. means such as this cannot be used. In addition, the
The rounding and skewmg of the cutttng edge allows blade is very fine and of a sensrnve shape, so bench-
~tto carve a surface by paring whlle it slices, givlng stone sharpening is by far the best.
a very dean resulr. The hooks themselves get into The 5 O angle at wh~chthe tool is offered to the
comerj that are normally tnaccesstble, making it stone is very low. ~therwlse,sharpen llke a n d
capable of smallTrntricate cuts m confined spaces. skew, with the cutting edge (or rather, the Imaginary
Make sure the mushroom (palm) handle is fitted line from comer to comer of the cuttrng edge) at
with the flat on the underszde, at right angles to the right angles to the length of the stone, first one side.
blade, .so you can use it equally m both hands. If khe and then the other (see pages 193-4). Because of
flat were facing left, say, you would find the tool com- the curve, you will have to tilt the cutting edge
fortable only in your rtght hand. My own preference first towards the point and then towards the heel.
1s for the long-shafted versron, fitred with a ltghter, so as to ensure that the whole of the edge and bevel
narrower handle than the manufacturer's own; I find IS covered.

thls more In keeplng with the Lght, deltcate nature of After checkrng the cut In a piece of carvtng wood.
the tool. strop well in the normal way. Agam, maintam this
The very low cutting angle of 5' gtves a delicate very low angle and keep the cutting edge square on,
blade, capable of shavrng off wood very finely. How- as you did with rhe benchtone.

Fig 6.4 The delicate

working ends of the
Gonzalez hooks
i L N N ~ V A T I C I N SI N c A R v l N G TOOLS

COGELOW TOOLS
These are made by Henry Taylor to the spec~ficatlons
of the American carver Fred Cogelow. When a sk~lled
carver, w ~ t han internatronal reputation, more or less
goes back to the draw~ngboard and redesigns wood-
carving tools, the results should be looked at carefully.
As w ~ t hFlexcut tools, I find that I can achieve rhe
same r e d t s with more traditional camng tools;
however, many carvers whose background and
aoui-oach are different from mine have found
very useful.
uges are made to quite exacting speci-
-

ficatlons, They come In a limlted range (Fg6.5), Iand Fig 6.5 A sekctaon of Cogelow tools, these come zn a
thetr features include: vmiety of lengths, shapes m$ bends, rnclwtlng the bencskew
c h e l shown on the right

the point side of the

!the blade thn3ugh the
c--- ---
workrng agalnst the grain wood.
1
a small forward or backward bend m the shank The 'bent skew', whlch somewhat resembles the slde
behiid the bevel to a ~ the
d 'scoopmg' acrion of chisel, is a useful tool for cleaning up the root of deep
the gouge as the blade leaves its cut grooves or hollows.

F ~:E6.6 The ulorking ends

offhese CogelosN gouges
are skewed and slightly bent
 W O O D C A R V I N G TOOLS. MATERIALS & E Q U I P M E N T

The result is a range of unusual-looking tools whrch most of us are famihat. S~rpris1ng.l~ enough
designed to solve many of the problems that new- a small range of rather simllar tools is still available
comers to carving may come across. In the main, it today (Fig 6.7).
seems that most carvers who have worked a long while The tang by whlch most of our Western carvmg
with traditional tools find these unnecessary, whereas tools are fixed to then handles 1s simply a splke. It
newcomers take to them more readily. Nevertheless, 1s often quite small, even when the blade Itself h
since carving is such a personal occupation it really is large, and I have seen large sculpture gouges bent ZE
a case of trying what tools are available and seeing the skoulder, either through incorrect alignmenr
what they can do for you. of rhe tang or through using the blade as a lev=
I have often thought rhat a socket would be a much
better option for big gouges. The reason sockets am
CHINESE CARVING not used IS thar they are laborlous to make and u x
fconslderably more metal; also, fitttng the handle r
TOOLS less straightforward.
The Chmese tools shown here have been hand-
In Volume 2, Chapter 3 is a drawrng of a Cgmnese made by the Jang family for four generations; the=
woodcarving tool, some 150 years old, in the Sclence are some 20 stages In the making of each tool, wh~ch
Museum m London. T h ~ sskew chlsel has a socket may be beaten up m 2,000 times; and the three tool-
made from folding excess metal around a spike, makers in the family make only 30 carving tools m a
mtead of the rang and shoulder of the tools wrth nine-hour day. The resultmg tools may look a 11&

Fig 6.7 Chinese tools made by the Jangfamily, awaihble in Britain fmm the Toolshap, Needham Market, Suffolk. They are
supplied unhandled, and the unsophisticated finish hides many excellent atnibutes
 I N N O V A T I O N S I N CARVING T O O L S

unsophisticated with their rough-ground fin~sh,and O Smooth and flatten the end of the wood that
the uneven ends of the con~calsockets need refinm~ - will reach furthest into the socket.
somewhat before use. The sweeps and widths also
O Create the lip or shoulder, shapmng the taper a
vary to some extent from what is listed in the cata-
little larger than your measurements.
logue. There are also some surprisingly sophisticated
features, however, and if you are prepared to invest @ Carefully and lightly push the socket onto the
more than the normal amount of time in putting rotatmg, tapered wood; this will mark the high
them into commission, the results are excellent and spots where irregularities in the metal prevent
quite handsome-looking tools. the wood seating properly.
The fishtail blades are truly symmetrical and,
@ Clean these marks away and, w ~ t ha little trlal
uniquely in my experience, the blades have been and error, you should arnve at a snug fct
given a gentle inside bevel in the factory. Their edge-
r @ The chances are, though, that there w ~ lbe
l a
holding properties stand comparison with other
carving tools. Given the labour involved in making slight wobble when you stop the lathe to check;
these tools, they are relatively inexpensive. This the ~ntemalmetal will have a slight belly. This
compensates for the amount of work needed to clean' can he fixed later.
up the blade and fit a handle, which is not supplied Q Shape the handle proper, mnnlng the llne to
with the blade. merge with that of the metal socket. Make it a
No flat gouge or skew chisel is available, hut these fract~onoverslze at the wood-metal lunctlon;
can be ground from the flat chisel if necessary. To agamn, the roundness of the metal 1s bound to be
make a flat gouge, form the inside bevel first. less regular than that of the turned handle.

@ The handle should be a jam tit; the likelihood

MAKING A HANDLE FOR A is, however, that the intemal metal of the
SOCKET CHISEL socket is not flat (havine
- a belly in the middle),
and the metal wobbles on the wood sl~ghtly.
These directions will apply to any socketed tool.
Smear the taper with a tine sawdust and wood
Since you must go to the trouble of making your own
glue mix, push firmly on and allgn the seatmg.
handle, pick a good-looking wood. The easiest way to
Leave to set.
make the handle (and the method of choice) is by
turning it on the lathe. Grip the wood for the handle 13 As you left the handle slightly overslze to beg~n
in a chuck at one end, leaving the other end free to w ~ t hshave
, and smooth 1t down untll you can
form the taper. no longer feel the end of the wood and the
begmmng of the metal socket.
O Make sure the very end of the socket is flat and
true; use a tile to dress it if necessary.
If you don't have a lathe, you can get a fairly accurate
Q Take accurate measurements of the intemal cast of the hole by push~ngwarmed clay or a model-
length and diameter of the socket; assume for ling material such as Plasticine into the socket. Use
the moment that the taper is straight. this as a pattern to whittle the shoulder; bring it close
to the finished taper before resorting to metal marking
It is best to form the taper to fit the socket first. Note as in step 5 above. Once the socket is dealt with,
that there is a shoulder or lip to support the socket carve and rasp the main part to shape. The result
end and add stability. (An alternative method which should he a snug fit with no movement. If there is any
is sometimes recommended is to leave a gap between wobble, then correct the loose fit as in step 9 above.
socket and shoulder to allow for the handle being The resulu are beautiful and unusual tools to use,
driven further in by shrinkage or mallet pressure, but relatively heavy - particularly the smaller ones - until
I have not found this necessary.) you get used to them.
 W O O D C A R V I N G TOOLS MATERIALS & E Q U I P M E N T

MICROTOOLS only, or mixed and graded by size). Wire-like shade

emerge from a simple unfermled handle (Fig 6.61.
These inexpensive tools are light and delicate, well
T h ~ s1s a term In c~rcularton (but not qulte shaped and easily manipulated. The smallest tool is
established) for very narrow carving tools and, in Kain (1.5mm) wide. They take a little getting used to.
part~cular,tools which are m u c h shorter overall than the as the shank, at around %.in (lrnm) thick, flexes a
regular gouges. Belng short, m~crotoolsare mostly used little disconcertingly i t can even kink or bend at the
w ~ t hone hand, or grlpped somewhat l ~ k ea pencil. handle if you do not use a light, straight touch.
For delicate work the length and handle welght of
the regular gouges can be an encumbrance. Micro-
tools are welcome and useful tools for the carver of
lntncate detall although there 1s nothlng to stop
- In contrast to the sslmple Dockyard tools, t h i
you adapting a narrow gouge of the ordma* readlly K~rschenZier-Schn~tze~sen('fine' or 'dainty' carvm-
available type. rools) are more ltke standard woodcarving tool-
Several d~fferentmakes are ava~lable,wtt) each
g a lrm~tedrange of what
manufacturer ~ r o v ~ d monIy
h e y belleve to be the most useful and popular rools.
As far as I know, there are no proper shortber~ttools
to be had, or gouges in the flatter range - though, to
sweeps at this size.
be fair, it is dficult to d~fferent~ate
You can make a flat gouge easlly enough, though, by
caklng a mlcro ch~seland ca~efullyreshap~ngwith
bench- and sllpstones. Three types which I have
found useful are:

DOCKYARD
TOOLS
Made in Colorado by the Dockyard Model Company, g Kmschm microtools: small we~nonsof the17 full-
r ~ b.9
these are available in several sets (for example gouges sized took

Fig 6.8 Dockyard

microtools: simple, light
and slender
 I N N O V A T I O N S I N C A R V I N G TOOLS

Fig 6.10 Close-up of the

working ends of Kirschen
(left) and Dockyard tools

w ~ t h octagonal handles, ferrules and shoulders I needed. These small tools are excellent for fur, halr,
(F~gs6.9 and 6.10). These features make them a feathers, etc., where the shape of the anrmal or blrd
little more expenslve. The smallest tool 1s %om makes some areas awkward to get at.
(0.5mm), although most are rn the order of X,-Xsm
(1-1 5mm)

I ASHLEYILES PALM TOOLS AND

BACKBENT V
I
' The manufacturers term these 'American Palm Cut-
I
ting Tools', reflecting a style of carving common in
the USA, stemming from a whittling style. The han-
I
dles are mushroom-shaped for use in one hand. (But
/ do remember that you can always change the handle
I d any carving tool to suit, if you don't like the one
1 with which it was issued.)
Although a small gouge is included in this range,
the most unusual feature is the range of V-tools,
which includes small (?&in/l.5mm) 45" and 60'
backbent V-tools. The blade shape is the reverse of a
longbent (salmon-bend) tool, rather than the reverse
of the shortbent as I have been using the term in this
book (Fig 6.11). Nevertheless, Iles are the only firm
1 thar I know of makmg any backward-curvmg V-tool.
In the past I've had to make my own for a part~cular
I
purpose, when nothmg else would garn the access
 CHAPTER SEVEN

CARE OF
WOODCARVING TOOLS

To conslder ho+ best to preserve carvlng tools from

damage and deterioration
I
To descrtbe appropriate and convenient ways of
storlng carvlng tools
I
Carving tools need looking after: Maintain a good level of sharpness
when you get them The emphasis here is on maintenance. Aim for &
best level of sharpness you can achieve, then ma&
as they are belng used
tain or improve this level, rather than oscillatini:
* dunng the tlrnes they are Idle between good and bad conditions.

This is most s~mplyachieved by cultivating good Put the tools away in the state in which you
hablts. Before dealtng wtth speclfic ways of storing would like to get them out
and looklng after carving tools, a few more general
I t is frustrating to get out a carvlng tool only to find
thoughts rnlght be useful.
that it needs sharpen~ng- or deal~ngwith in some
way - before it can be used. Far better to have took
Deal with mechanical faults and problems sharp, worhng well and ready for ~mmed~ate use.
with your carving tools straight away So have a rule: tools are not to be put away unles
they are as sharp as you would like them to be when
Rather than let a lot of small concerns bu~ldup, deal
you next pick them up t h ~ sw ~ l lsave more effo~i
-
with each problem as and when it is not~cedif at all
than it creates.
poss~ble The object 1s to get your tools feeling
so comfortable and working so well that you need
Protect the carving tools properly at all times
hardlv. ewe them a thought.
u - T h ~ sIncludes making- a
h a b ~ tof sharpening your carvlng tools as you buy Essentially this means respect: respect for the carving
them, so that they are ready for use whenever the tools and what they can do. Protect~onappltes to
need arises. mechanical damage, espec~allyto the cuttrng edges.
-
CARE OF W O O D C A R V I N G TOOLS

and to the effecrs of damp. Carving tools which against one another as you are working. By all means
are used continuously do not rust, so the longer the leave out the tools you are immediately using, but
tools are left unused, the more protection they need make a habit of clearing away redundant tools - and
from damp. This matters most to carvers working in make sure they are put away sharpened.
garages and sheds at the bottom of the garden. If at
all possible, bring the tools into the house between Periodically wipe the tools with an oily rag
carving sessions.
If tools are not being used for some time or perhaps
-

towards winter if the workshop is not heated, or is a

Newer lend out tools
little damp - this will keep them 'sweet'. Wipe the
Make this a rule - even to friends. Woodcarvers have blades clean with a fresh cotcon rag before handling
a degree of specialized knowledge and personal them again.
concern for their tools that is rarely shared sympa-
thetically by others. It is not unknown for the 'friend' Store them safely when not in use
to be looking for a screwdriver while ostensibly asking
There are several methods of storing woodcarving
for a chisel. The exception may be another carver
tools - all attempt to store them out of harm's way,
whom you can trust to return the tools in the condi-
but ready when they are needed. The methods
tion in which you lent them.
described below all have advantages and disadvan-
tages. You may find a mixture of these the best way of
storing your particular range of carving tools.
STORAGE POSSIBILITIES
TOOLROLLS
This is an old and well-tried method of storing and
transporting carving tools. The handles of the tools
Put cawing tools away, and out of the way
are held in opposite rows of pockets, which are stag
Large numbers of tools on the bench at any one time gered so that the blades of one side lie between the
are in danger of being damaged if their edges knock handles of the tools on the opposite side (Fig 7.1).

Fig 7.1 In a tool roll, the

handles in one set of
pockets support and protect
the b&s of the tools on
the opposite side
 WOODCARVING TOOLS. MATERIALS & EQUIPMENT

The handles support the blades and edges and, when Without good organization, you w~llbe continually
rolled up, the tools nestle together and are prevented opening and closmg your tool rolls to put tools away
from knocking against each other. The material ~tself or get them out. One idea is to fill the rolls according
can help protect the tools from damp; good choices to the frequency with which the tools are used. A roll
include felt, or canvas or lmen whlch have been can be left open on the bench, but then a lot of bench
washed to remove any dressmg. space 1s belng taken up by tools that are not in use. It
Some measurements for an average roll are glven is better to leave the tool roll open somewhere away
in Fig 7.2, but cons~derationcould be given to having from the bench, but close by.
larger or smaller rolls with dimensions appropriate
to your own tool slzes. You m~ghrtry hning up a few
sample tools and gauging the pocket sizes wtth a flex, Tool handle
~bletape measure.
Tool rolls are eauly made wlth a sewing rnachlne
(Fig 7.3). Use baize for the Inner pockets, w ~ t han
outer plece of tough mater~alsuch as canvas. This
should fold over the ends of the blades for addltlhnal
protection, as well as strengthenmg the outside of the
tool roll. Sewn-on tapes are used to tre the rolls up
when not m use.
A good, manageable size mlght take between 24
and 30 tools. With larger numbers, the rolls start
becomlng a blt cumbersome; several smaller rolls are
a better ophon. These tool rolls need replacing every
so often, as, with the best wlll m the world, the sharp Fig 7.3 Makrng a tool roll fm more strength, sew a double
tools will cut them. lrne that crosses the edge of the pockets

+...nnm\ Outer. canvas-l~kematerial

21n (50mrn)
Inner felt

Long fastening
tapes
2-3in (50-75mm)

h End pocket for pencil

..- --.- yIII. fa tool roll

 CARE OF W O O D C A R V I N G TOOLS

The greatest advantage in storing woodcarving tools

inside fabric rolls is enjoyed by those who do
not have a permanent workplace. The tool roll can
then be stored wherever convenient - perhaps in
a wooden box such as a carpenter's toolbox, with
other equipment.
A type of tool roll which contains a row of elastic
loops along the centre can be bought commercially,
but is not recommended. Passing the sharp edges
through the loops without cutting them - or your
fingers - can be quite a palaver. Also, the blades
themselves are looser than in the pocketed tool roll,
which increases the risk of the delicate edges being
damaged. This sort of roll may have its place for other
bits and pieces, however. 1

This method of holding carving tools can be very

convenient. The tools are within easy reach, and
can be easily returned after use. The bench can be
kept less cluttered and the tools at your disposal can
be easily seen.
Two types of rack are frequently used:

LOOI'S O F MAIERIAI
I.?i t h e r ,trip, <,l.i ~ , , r,C.IL l ~ ~ l rlie. ~ : i ~ k , . ..I. l ~iir,,r.
vals along a board at the back of the bench. Blades Fig 7.4 Loops of stout fabric or leather can be used for
are inserted edge down, and the tool is supported by storing tools
its handle (Fig 7.4).
There are some problems. For this type of rack co
work, the tool handle must be wider than the blade,
or the tool will fall through the loop. This limits the
size of tools to about lin (25mm) or narrower,
depending on the size of the handles.
The blades also need to be heavierthan the handles
in order for the tools to hang upright. As some blades
are quite small and light, their handles tend to fall
-
over and across others. The edees beneath can then

L
touch or knock against one another, with possible
damage. You should consider protecting the edges of
some tools with vulnerable comers - such as fishtail
and skew chisels -by means of a cork pushed on to the
end (Fig 7.5). I prefer plastic corks over the natural
ones as they don't absorb wine, the acid of which I Fig 7.5 A cork, preferably plastic, will protect delicate
have found to corrode the embedded edge. comers, either on the bench or when the tool is stored
 WOODCARVING TOOLS. MATERIALS & EQUIPMENT

WOODEN SHELF they will last indefinitely. Such drawers will n&
An alternative to loops 1s a rack made by borrng and lining to protect the edges of the tools. Self-adhesi1-i
cuttlng various-sized holes and notches into a shelf cork floor tiles are useful for chis; the unvamishk
of wood (Fig 7 6). The holes take tools where the ones are better for protecting the contents of th
blade is smaller than the handle, the notches where drawer from damp.
the opposlte IS the case, normally gripping the blade If all the tools are laid out neatly pointing in om
by the shank. directicq there is little danger of the blades clash&
This is a firmer, safer arrangement than the loop against each other when the drawer is slid open E
method of hold~ngtools, but not so easy to adjust. To closed. Alternatively, you can fit more tools in by 1 a ~ -
beg~nwlth, guesses have to be made as to what tools ing them in opposite directions (Fig 7.7), though ic
you may eventually have, and the holes, notches and this case you may have to take a little more care i;
necessary clearance between blades need to be estl- avoid cutting yourself as you take them out. The
mated. A more elaborate solutlon would be a shallow smallest tools, especially those with round handle.
wall-mounted cupboard wtth racks instde and on the may roll a little, but a few wooden dividing strip.
ins~desof the doors. acting as racks, will prevent this.
A traditional alternative to drawers is a lockable
wooden box, with trays fitted in one above the 0 t h ~
in the manner of a needlework box. This would is
This works ve+y well as a storage method, especially if easier to make than a set of drawers, though perhap
the drawers are part of the carving bench or close at less convenient to use. You would need to keep your
hand. Use ddferent drawers, or parts of drawers, for favourite tools in the top layer.
part~cular sweeps or shapes of tools. Home,made
drawers can be shallow boxes made w ~ r hslmple butt
jo~ntsand plywood bases; they do not need to be elab-
orate Making the bases wider than the boxes, so they There may be an occasion when carving tools ha1 c
can run in grooves in the sides of the carcass, is easier to be stored for a length of time, perhaps several
than making conventional drawer runners. months. Above all, protect them from damp: W I ~
Metal multi-drawer cabinets which are sold for the blades with the same sort of oil used for sharpen-
office filing are exactly the right size for storing wood- ing, or better still wrap them in oily rags. Protect
carving tools. These units are available with 5, 6, 9, them from damage by rolling them up in rags or in
10 or 15 drawers and can be bought second-hand. their own tool rolls Fmnally, keep them in a polythene
The drawers can be easily labelled and, being metal, bag in a dry place.

Fig 7.6 A simple rack with hoks and notches for storing took
 CARE OF WOODCARVING TOOLS

BENCH DISCIPLINE Use a mallet only when the tool is strong enough
to take it, and be particularly careful with
shoulderless tools.
Previous chapters dealt with carefully selecting your
carving tools; Part I1 discusses working your tools up
to their most efficient and sharp condition. Caring for
WHENTHE TOOLS ARE ON THE
BENCH
above. However, the discipline of looking after them The danger is that the carefully sharpened edges may
also involves the time when they are actually used. be chipped rhrough knocking up against each other
Again, some basic practices will help. or other metal objects. So to help guard against this:

I DURING
CAWING Line u p the tools parallel to one another, with
aI1 the blades in the same direction
Avoid levering or prising wood chips away with The tools should be lined up at the back of the bench,
the chisel or gouge, as this can break an edge -1 or out of the immediate working area. They will look
cut the wood cleanly instead. a little like a series of piano keys, which is not a bad
way to regard them. It is better if the edges point for-
wards, as the tools can be recognized more easily from
this direction (Figs 7.8 and 7.9). This is an excellent
When a delicate tool such as a skew has entered habit to get into right from the start of your carving
the wood, do nor rock it from side to side. There career. The discipline of always putting down your
is a real danger of breaking the comer and tools in a row not only protects them from each other
leaving it buried in the wood. but, by making the tools easier to find, speeds up the

Fig 7.7 Reversing every other tool in a full drawer will

safely fit more in

111
 W O O D C A R V I N G T O O L S . MATERIALS & E Q U I P M E N T -

If an ad
make a

-
you a73il
Fig 7.8 Lznxng up the took m use keepr thew edges from knockzng uga~mteach othe~and makes them easzer to recoplze
You wau
carvlng process and adds enormously to the overall Keep tool edges away from anything metal
awareness and 'flow' of what you are domng.
Qulte a few metal objects can he on the bench:
clamps, holdfast heads, compasses, metal rulers and sc
Try not to hawe too many tools on the bench
on (Flg 7.10). The sharpened edges of woodcarvin~
If a lot of carvlng tools are needed on a partlcular job, tools only have to touch these thmgs, or each other.

I-
try to organue them so that the tools that are least to damage the edge sufficiently to leave scratch lines
hequently used are out of the way and lrned up A wooden block placed beneath the jaw of a clamp
towards the back of the bench. Brmg forward the wtll help to prevent contact with the cutting edge, as
ones needed for the immediate tasks. well as protecting the work or the bench top from
bmlsrng. Don't forget any metal objects embedded m
Periodically clear the bench the wood itself, such as carvers' screws.
Repeatrng a p a n t made above: make a h a b ~of
t clear-
Beware of the h g e r s to carwing tools when
lng the work area of sutplus tools and puttlng them
nuwing around and adjusting work
away, after first mak~ngsure they are sharp Also clear Fig 7.10 &
the bench of wood chtps and other b ~ t sand pieces This is the tune when - because the attention is else- - an uneqd,
occaswnally - t h ~ scan coinclde well w ~ t hnatural
breaks for brewlng up.
where -tools can be rolled about agalnst each other,
or knocked to the floor.
carvers Be
"tnng edgs .
 CARE OF WOODCARVING TOOLS

rig 7.9 Carekss placing

1 of tools on the bench wtll

rozt nnu m hvnaged edges

Touch up any damage to edges straight away

If an edge does get chipped or damaged accidentally,
make a point of dealing with it as soon as possible. If
you wait until you need the tool again, it will be when
you want to carve, not sharpen.
- LoQkhg afr6 w@&ming to& from
rhe.morneneem &'get&eq, &&h
-

Aeir sharpenin&wWe th$y &b$ipg

&ed,to hen-^&&^ .aresrgted,. .Invdlj.esa ~-~

degree of discipline. W i p l i e can be seen: ~~~

& < ~ & ~ ~ o o , habtrr- ~ ~ ~ o E ~ & ~

9~enc~rgetl;od~s~fg~~ga_b4Lt
&~.::. ,.... ~ . - &in&, '~~ ~ ~ ~

&srvmg&Y~;&ed&+ ~ - &&ener$y;iq ~ -~

~&:f3&c@te;*&&q$.- ~ -
-
= -
- - ~- ~

f & . y ~ ~I
~ ~ ~

-
.Xyclw.&-niEtaa&care
~

-*@gg&&&&&-
~ ~

~.
. ~~~ ~ ~ I ...~.~
~~ '. &S@&-and~f&r>
- df ..nz&@r~~&ie:
issf& &,getinn&g
...~,.
-
~. ~~ =- - ~

~ -
-
~ ~

~ay~6@~~@~ig@E~~g:~&:atG~.~gt~&&-~
*-:~: id I
- ~

~,Md
- - --
~. ~

-
- ~

. ~ . ;."
- ~ ~

--
;

-- 9-
~~
wJ:S:-*h.s ji.&&;~~3B6t;r$~YY
~
~-
- -~~ - - - - -
~
~, ~- -

= &
@
k. ~ ptyy:
-
.
-. -~~~
A -
--

:&F3-*zr~;~;;&~ip~~e~m~~.&~;&*=
. - 2
~~

_ -- -

L
~

- ~
~

- ~~~ ~ Z , ~

"
- -
~ ~~

-
:
~

Fig 7.10 Delicate edge versus the car-iron foot ofa clamp .. %ggq-&:R-+ilg;z%e~-~- <
- -~

~. .- .
-
-- - .~
~
- ~

-- -~= ~- -~~~
- -~ -
~ &. ~ ~ ; ~ c ~ ~ s ~ r G = g ~ ; & ; I ~ e= T ~ ~ - k ~ - ~ ~-
~ ~
~~~~

-an unequal contest. Clmnps are commonly used by

~

:
-
-. ~

- - -- = ~ --
~
- -
~

=-- - - -
carvers. Be aware that they are an easy source of damage to
~ ~

~- -~-~
~
~ ~ ~ - -~- -
- - ~
p ~ -

~ ~~
~
~

~
-~ - - - - ~~ -~
~
~
~ ~
~ ~~
- - - - ~

cutting edges which have taken time and effort to achieve ~ ~

-
-
~~~ -
~-- ~
-
-
~~~~
~~
~~

-
~~

--
~~

-
-
~~
~ -- - -
-
--

113
I
L
 SHARPENING
WOOD,CARVING
TOOLS
~~
-. ~-

~ -
 I
To emphasize the importance and benefit of having sharp
woodcarving tools
To make clear what 'sharpness' is, and what factors contribute to a
sharp cutting edge
To describe the sharpening process in general terms and, in detail,
how specific types of woodcarving tools are sharpened

. 1
I
To describe the equipment needed to sharpen woodcarving tools, and
how to use and care for it
To advise on how to maintain sharpness with the least effort
To compare the merits of traditional sharpening stones and more
recent alternatives
To look at the problems and benefits of electrical sharpening
methods
To promote, through being at ease with the sharpening process,

Each of these a m s in turn w~llnow be cons~deredin a little more detail.

The importance and benefit of W n g sharp woodcaming tools

When you obrain a new carving tool you must first put it into commission; in other
words, bring it into full servlce. This means examining the tool along the lines
already discussed: checking the handle for comfort, rhe shoulder, shank and blade
for size and ahgnment, and so on. These checks you need only do once. Then, of
course, check the cutting edge and bevel- this is the working part of the tool.
The mew of many newcomers - stillmamtained by others who have been cam
a sbe tolerated in order ro gel
ing a w h a l e is that sharpenmg is a chore ~ ~ h l c h hto
on wlth the carmng itself. The markenng of pre-sharpened tools caters to these
feelings - but unfortunately the spontaneously self-sharpening woodcarving tool
has yet to be invented, and the task of sharpening tools will remain, a s ir always has
been, somethii every carver must undertake.
Even though there is hardly a book an catvlng that does not start with some
information on the subject of sharpening, and information is also gtven our by tool
manufacturers themselves, students at carving classes still rn up wrth badIy
sharpened toole - or even tools so useless that no sharpening could reclaim them.
The reason 1s ewofoltl: firstly, the smdent does not feel or comprehend why sharp-
ness is importanr; and secondly, the information on sharpening is strll inadequate
or unclear.
What is needed is a change of att~tudeto some extent. Carving tools should
nor be seen as separate from the wooderarv~ngitself. Sharpening is not the bane
and penance of the carver but part of the process a process that rnvolves your-
-

self, workrng wlth your desrgn, the wood, your carvlng tools and the high quality
of then cuttrng edges. All these factors support each other as the whole process
moves towards a sat~sfylngend (Chapter 8).
Sharpenmg woodcarving tools 1s not a partrcularly difficult sklll to learn and
l eitself. In real importance only becomes obvrous
exercrse, and can be e n ~ o ~ a bin
with experrence, so a beglnner has to be convinced of the advantages to be had
from really sharp carvrng tools, in order to put in the effort needed to learn the
skills of sharpenmg. These chapters will try to help with leammg such skills and
gettrng a feel for then rmportance.

What 'sharpness' is, and what factors contribute to a s h a e cutting edge

As with carving itself, knowing what you are looking for is halfway to fmding it.
What, then, is this magical sharpness?Is it always the same, for all carving tools,
at all times, for all woods?
The theme of these chapters follows the old axiom: 'To give someone a fish is
to feed them for a day. To teach someone to fish is to feed them for the rest of their
life.' Those who have been given a set of unprepared carving tools as a present
must face the problem of sharpening them first. Without proper instruction, this
can lead to a frustrating experience - ending, not uncommonly, in the whole
notion of carving being abandoned before you have even started.
With a gift of pre-sharpened carving tools, at least one gets to carve wood for
the day. But without the necessary sharpening skills the tools dull, begin to cut less
well, and dissatisfaction and frustration arise.

The sharpening process in general, and how specific qpes of

woodcawing tools are sharpened
There IS a method, basic to the sharpening of all woodcarving tools, that can be
taught and learned. The key approach grven rn these chapters wlll be adapted for
different shapes, sweeps and slzes of blade to allow you to achieve what you want
m a particular case, and In the qurckest and most stra~ghtfonvardway.
Some of the techniques of sharpenmg may seem awkward at first and cer--

tarnly there are some tools that need more care than others - but they are well
withm the capabil~t~es of anyone dexuous enough to carve (Chapter 9).

The equipment needed to sharpen woodcarving tools, and hto use

and take care of it
If sharpness and carvrng tools are inseparable, acquurng carvlng tools means
acquiring the means to sharpen them. Once you Invest money In carvrng tools,
you need to invest a little more on the sharpenmg equipment, and learn to use it.
There are various options m sharpening, lnclud~ngelectrical help. But at the bas~c
level you do not need much In the way of k ~ tso, the cost can be less than that of
a few carvlng tools. And, m the same way that good-quality carving tools last a
liet~me,so, as a rule, wlll good-quality sharpen~ngstones.
Chapters 10 and 11 explain what equipment you need, why you need it and how
to use it, as well as how to look after the various bits and pieces so that they last a
long time.

How to maintain sharpness with the least effort

Sharpening tools, and maintaining their sharpness, is essential to the woodcarver.
It needs to be accepted, and not seen as a chore or an interruption to the work.
The meditative quality of sharpening can be enjoyed, as can the self-respect and
joy in achieving and using a beautifully sharpened blade. There is also the oppor-
tunity to take stock of how the carving is progressing.
While fostering this attitude, ways can be found to minimize the effort of sharp-
ening and maintaining the cutting edges - creating routines, rather than big
events that stand out for their tediousness (Chapter 12). If you have a resistance
to the discipline of sharpening, then the chances are you will have problems with
the discipline of carving itself.

Traditional sharpening stones and mare recent alternatives

Sharpening 'stones' are now available in a wide range of materials, from true stone
taken directly out of the earth to substances made with all the guile of high tech-
nology. They may be given 'grit' designations in order to make a comparison with
conventional stones, but they are not at all the same: their behaviour, cutting
properties and feel differ considerably.
Chapter 13 takes an overview of the various 'stones' available, assessing their
strengths and weaknesses and how they fare compared with the well-tried

A habit of regular s t ~ o p p k gw~llmntntam the keenness of the cutnng edge, and help to make
sharpening a pleasant rouane rather than a major event
Arkansas ollstone - which I have taken as a rough benchmark, and assumed as
standard m my description of sharpening technique.

The problems and benefits of electrical sharpening methods

More and more, electrical sharpening methods are augmenting, even replacmg,
the hadit~onaluse of benchstones, sl~pstonesand strops. When power sharpeners
~roducethe correct qualrties of shape and sharpness, safely and easily - and much
of the result depends on the expertise of the user - then they soon become essen-
tial add~tionsto the workshop of any busy carver
However, the electrical devices available today have both benefits and draw-
backs. They are helpful in some areas but can cause problems in others. It is nor
simple, and sometimes not even possible, to achleve the shape and quality you aim
for using elecrr~calmethods. The use of elecalcal sharpening or honlng machines
therefore needs careful consideration (Chapter 14).
1

Promoting, through being at edse with the sharpening process, more

confidence with woodcarving itself
Throughout t h ~ book
s I take the attitude that the carving tools should not get m
the way of the carver's intentlon. Tools can get in the way both phys~callyb y
berng, for example, poorly shaped - and mentally, as when frustration arises from
not be~ngable to sharpen a particular tool adequately or to ach~evethe effect or
surface finish that 1s wanted.
The answer to these som of problems lles largely m the idea of discipline: self-
imposed habit patterns and approaches to tools, sharperung, and carvrng itself.
Such disc~~lines ease the way towards what the carver wants to achleve, and
command over woodcarvmg tools and their sharpness removes one of the major
bamers between the carver and the carvmg.

Based on a German
w o d c u t of 1470

119
 CHAPTER EIGHT

WHY CARVING TOOLS

MUST BE SHARP

To emphasize the behefits of having truly sharp

woodcarving tools
To encourage carvers to see sharpening as a useful
and pleasant exercise rather than an irksome chore

Apart from carving itself, sharpening and looking The reason turning tools can be used in such a com-
after woodcarving tools is the main task undertaken paratively rough state has to do with the high surface
by carvers. A master woodcarver once told me that speed of the wood revolving beneath the cutting edge
when costing a piece of work, he would allow up to - which requires short, tough bevels (Figs 8.1 and

one third of the allotted time for sharpening and 8.2) a n d the peculiar application of the cutting edge
maintaining his tools. This is a stunning bit of infor- to the wood. Woodturners regularly supplement cut-
mation for newcomers to take in, as it was for me at ting by finishing the turned shapes with sandpaper to
- beckons - who wants
the time. After all, the carving expln;t the natural I ~ * a 1 1 * ~nf7 the wood.
to spend hours sharpening!

tools used in woodturning, one difference quickly

becomes obvious: turning tools can be used straight
from the grinding wheel. This is far from the case
with carving tools.

you the effect you are after. But carving tools

normally undergo a far more involved process of
sharpening before they are ready for use on the wood
and the would-be carver can get down to work.
Without doubt, this need to sharpen carving tools
has caused many a potential carver to become a
woodtumer instead.
--
1
.>

Fig 8.1 The nose of r luge:

steep bevel and the rounded end make this an unsuitable
shape for a caruing tool
~e
 -WHY C A R V I N G TOOLS M U S T B E S H A R P

Fig 8.2 The very $hart b

begel of thzs roughmg gouge
makes it suitable fix turners I
hrt enurely mappropnate
for carmg

1 .
,
In carving, especially when carving realimic forms, peculiarities of pre-sharpened tools are comldered
the cuts of the tools can be left as a surface finlsh m later, on pages 210-1 1.
their own rtghc - but this means productng cuts worth The skill of sharpening the cutting edge 'just so' -
leaving (Ftg 8.3). Carving involves many more (and and keeping tt sharp - is a skill wh~ch,for the
mote cdnpl~catedand delicate) shapes of tools than
tbose used in m n g , and rqures a much more
involved approach to sharpening than could be
achieved from a gr~ndingwheel alone.
Until quite recently, there was no such thhg as
'ready-sharpened' woodcawing tools. Tools came
with a bevel roughly ground, or set, by the factory. It
was taken for granted that a carver would sharpen
them exactly as he or she wanted. Although pre-
sharpeninghas its advantages, carvers need to sharpen
different tools in different ways for dlfferbt purpases,
This 1s what the makers would have expected when
they sent out tooIs 'set but not sharpened'.
In this book, the emphas~s1s on the set carvlng
tool which requires sharpening, and possibly even
resetring. Unless stated othenulse, these are rhe sort
of tools that are being referred to. Pre,sharpened tools
(FtggB 4) can easily be deal^ with by the same method
when it becomes necessary or appropriate to resharpen
&em. The various advantages, d~sadvantagesand

Fig 8.3 Figures from The Assumption by E@d&rrk

Aurm (completed 1750) at Rohr, Germany The smng
changes of plane are the hallmarks of the 'glypfic'(carvwg)
process beneath the gessa cowing, dad show the traces left
'bj the carving tools themselves
 W O O D C A R V I N G TOOLS. MATERIALS & E Q U I P M E N T

EFFORT
The cuttmg edge of a woodcawmg blade 1s noth~ng
more than a wedge of steel - a fine wedge, cuttrng and
p r w g the wood fibres apart. The angle of the wedge
1s the angle at which the bevel of the carvlng tool 1s
set, and th'is can vaq under different conditions. The
bevel also needs to be the correct shape, which will
be dealt with in more detail in the next chapter
(pages 128-40).
If you find that cutting through wood is harder
work than it need be, one of the most likely reasons
is the incorrect setting of the bevel angle as a prelim-
inary stage to sharpening (Fig 8.5). As soon as this is
Fig 8.4 Bnghtly polrshed, ple-shaqened tools, them ups improved, the amount of effort needed to cut the
protected by d~ppingm a rubbery gel wood will decrease.
A microscope applied to the very edge of a carving
woodcarver, comes before everything else. Wlthout tool shows a clystalline structure. The cutting edge
it, all other sk~llsof design and amstry will be com- is a wall of molecules making up a crystal lattice.
promised and the execution of the work will suffer. When the blade cuts, this wonderful crystal edge is
And, as a skill, it must be learnt. Its value cannot pushed into a similar microscopic world of wood
be overestimated. fibres, prising it apart. When a tool is sharpened, the
To put m the effort to learn and practlse this skill, thickness of this crystal edge is refined down to the
motlvarlon is needed the effort: must be seen to
- most slender state possible the minimum thickness,
-

be worthwh~lem terms of results. So what exactly given the angle of bevel, that will separate the wood
are the advantages that tool sharpness gives to the molecules and fibres (Fig 8.6). Eventually this resis-
carver, and why js such a high degree of sharpness tance will start to erode the microscopic structure of
needed? The followmg are some answers, but not m the steel, and from a thin peak of crystal, a thicker,
order of importance. rounded and broken edge will form (Fig 8.7). Forcing

Fig 8.5 i t is an obvious

brinczpk that the tluckness
? f a wedge refares to the
zmount of efmt requ~redto
pwh it mto the same
matma1
 - W H Y C A R V I N G TOOLS MUST B E S H A R P

ig 8.6 Sharpen~ng
r&m the crystal latnce o j
nm&g edge to a kwel
mhith cannot be seen by
the mked eye

edge

- edge

7 As the crystal lattice of the edge wears down, so more efi ' ! w push it through the wood fibres

123
 W O O D C A R V I N G TOOLS. MATERIALS & E Q U I P M E N T

a passage against the resistance of the wood becomes woods and the right technique, to cut cleanly against
more difficult as the tool becomes blunt. the grain if necessary - providing your took are sharp
The amount of effort needed to carve is affected by: enough. Because sharpness makes all directions of cut
available, sharp carving tools will help you achieve
the angle of the bevel
and control whatever form you are seeking.
the refining of the bevel edge by further As a corollary, blunt tools will he inhibiting. They
sharpening. inhibit you mechanically (because of the dficulty in
cutting with them), mentaIly (because blunt tools
When less effort is needed to cut, the speed of carv- continually intrude on your intention) and emotion-
ing increases, in turn enhancing efficiency. Speed ally (because of the frustration that arises),
and efficiency also depend on the carver's approach
to the work: the method and how the tools are used.
Nevertheless, sharpness is indispensably linked to
the swiftness and effectiveness with which a work is As well as giving control over the form, a really sharp
executed. So, less effort means quicker work and carving tool will leave a beautiful, polished facet as
greater efficiency. it cuts away a wood chip. The bevel follows behind
the cutting edge and burnishes the wood. This effect
is best seen when the wood is cut with the grain,
but also occurs with cross-cutting using the slicing
With most woods, and correctly sharpened tools, cut- technique. Such clean cutting may be all the surface
ting across the grain need not be much different from finish that a carving needs in order to arrive at its
cutting with the grain. It is even possible, with some finished state (Fig 8.8).

Fig 8.8 A detail of The

Banquet at Simon's
(1490-2) by
Riemenschneider. Light
toolwork on the peak of the
hat suggests fur, and
therefore status; plain
su$aces balance with
strong areas of tool cuts;
and a V-tool was probably
wed to draw in details in
the backFound
 W H Y C A R V I N G TO( .S MUST B E S H A R P

Blunt tools, however, tend to tear wood fibres rather Sanding is never an enjoyable task, and the less
than cut them, and leave scratchy ltnes - although time and effort spent on sanding, the better. Even if a
thls can also be the result of bad carvlng technlque. sanded finish is wanted from the start - say, to show
This is when rasps, files and sandpaper will be resorted off the natural colour and beauty of the grain - it is
to as expedients. still worth working towards the final surface with
Tool cuts in the wood have been called the 'finger- sharp cutting edges. Odd scratches in otherwise
prints of the carver'; they are untque m a way that a cleanly cut facets of wood can be ignored, as these
sanded surface 1s not. A sanded carvtng looks, and will be taken out with the sanding. Bear in mind that
feels, very d~fferentfrom one left stra~ghtfrom the using tools on a sanded surface will blunt them, so
chlsel. The freshness of cuttmg, m t h crtsp lmes and carving must be completed before sanding begins.
edges, will all too eastly be removed by sandmg. The Choosing a smooth sanded finish is not the same as
defin~techanges of plane that makes carvlng look d ~ f - having to finish with a sanded surface because you are
ferent from modell~ngw~llbe smoothed and rounded incapable of sharpening your tools properly, or have a
over. The effect of mn~udtctoussanding can be to make poor carving technique (Fig 8.9).
a ptece of carved work look as if it has been sucked a
whtle, Itke a boded sweet.
Uslng tools wlth sharp cutttng edges, accompa-
nted by good technlque, at least glves you the opnon This may seem conrrary to what is expected, but
of a surface finish left stra~ghtfrom the chtsel. Many blunt carvlng tools are actually more dangerous than
carvers have never experienced t h ~ sophon because sharp ones. Encouraging youngsters in schools to
their tools are not really sharp. They may have to work w ~ t hblunter tools, in the hope that thls will
, resort to sandpaper for the fin~sh,whatever the cost in lead to fewer mishaps, 1s a mtstake.
loss of decal1 or deviat~onfrom the original rntentlon. Puttlng as~dehazardous techntques and habits of
Once really sharp tools have been used, a n entirely carving - such as puttlng parts of your body in the
new range of options IS often seen. way of the blade - a blunt tool needs more effort

Fig 8.9 A smooth surface

makes a dtferent iund of
beauty auailabk to the
carver
 WOODCARVING TOOLS. MATERIALS & EQUIPMENT

behind it to force it through its cut. When the blade burden it is until sharp tools are used. Sharpening
eventually reaches fresh air again, it is still being pro- carving tools is less tedious than workimg with blunt,
pelled by this excessive force, so it tends to leap out badly, even wrongly sharpened tools.
of the cut in an uncontrolled manner. It is far better O n the other hand, sharpening itself can be a
to take easier cuts, with less effort, and in a controlled worthwhile use of time. A break from carving to
way, than to be continually jerking a blunt tool out of touch up an edge can give you time to stop and think,
the wood. assess what you are doing and consider the next step.
Without wanting to create too romantic a vision, I
ENJOYMENT find that sharpening o n a stone can be soothing - a
quiet, healing sort of activity that contrasts with the
One of the most tangible pleasures of teachmg wood- energy often found in the actual cutting.
carving is to see the joy and recognition on the face Finally there is the sheer joy to be felt when a fine ' I

of someone who uses correctly and tmly sharpened edge of steel slices through a good piece of wood. In a
tools for the first time. Some people may have been silent workshop it makes a noise, a sort of sliding,
working away - possibly for years - with effectively whispering, as the shaving comes away. The simplicity
blunt tools, even though they have tried their best'to of the action and the feel of control and command,
sharpen them. even when striking the tool with a mallet, is part of
This is the real case for sharpness: working with the reason why many people carve. All this is facili-
blunt tools is a chore, and rarely appreciated for the tated by really sharp carving tools (Fig 8.10).

-
-
k
3

-
1

-5
-.

3l
-
L'
--
I;r
rn

.
i;?

.
126
 CHAPTER N I N E

PRINCIPLES OF
SHARPENING

'='="*"-
To define the factdrs which contribute to a sharp
and correctly shaped cuttlng edge
To give a n overview of the shatpening process
I
I

FUNDAMENTALS The surface left from clean toolwork may be

regarded as finished, givlng a parricular clean and
sparkhg to the work.
What is sharpness, and how do we measure it! Is The carvlng tool cuts more or less as nicely
there a difference between $sharp', "sharp enough' and across the grain as with it; the sharpness makes
'really sharp'? The amwe* to these questions lies negotiating curves easier, where one side of the
largely In what we wish to achieve, but also in curve will be against the gram.
our astxtude
The meaning of the word 'sharp' includes such A sharp edge, properly shaped - for example,
wnnotations as 'keen', 'fine' and 'clear', as well as with its comers retarned - works as efficiebtly as
'piesctng'and 'acute'. The word refers to wit possible.
anrl temper, as much as to the cutting edge of a c a m q Graoves and cuts can be laid down next to each
tml, Woodcanters certa~nlyneed their tools and wir other mthout tearing up or crumbling the ridges
to h v e these quaI&ies, if not their temper. There is of wood m between (Fig 9.11,
also rhe carver's adage to be borne m mind: 'Dull
Using a sharp carving tool IS less of a physical
tools make dull wmk-'
effort than uslng a blunt one.
The essential ~ a c r e r ~ s ~ofi cas sharp carving
tool are these: Twithout doubt, such tools are more of a n
aesthetic pleasure to use than dull ones.
The edge will cut thmugh word more eas~lythan
a dull one with the same angle of beveL
h e wood sculptors, worki~y!on large sculpture with
IC will leave a shiny, polished facet, without the intention of using files and rasps aftenvards, can
scratch marks. afford to m o r e scratches on the surface of the wood
 WOODCARVING TOOLS, MATERIALS EQUIPMENT

Blunt

Fi9.1 One rest for shmpness is eo fay u nates of grwves mt to each othLl

or tom p n took which are a bit dull, as these flat, rounded et hollowed along its k n g h and them
marks wiI1 eventually be. removed. As a tomdEous may be s bevel on one or both s~desof dre cut-
decision && may justified on the grounds o f e x p edge, che sum of whichgkves the overall bevel angle.
diency - a ~ a s eof 'shaq enough', with less 'down The bevel on a wood- toal is m effect a
time'. More often than nut, however, it is a case of wedge which. cute and prises .fibresa p w winsr resis-
the sculptor not knowulg - nac having been taught- t a m (Fw9.2 and 9.3). Aa wood f i b r e ~ f r o m d i e n t
or not bothe~ingto m a h a i n the cutting edges.
What matters is the cuurng af the roo1 in the
woad, and vhether it achieves what you trrant ir ta.
W~the~rperlenceyou will become ac.utely semirive
rs the feel of the roo1 a2 ast is working. You will also
see what fshappening from the path of the gougt: or
clrisei, and will know havv t~ make equally sensitive
adjustments to the edge.

I I
BEVELS AND CUTTING I
I
ANGLES
I
FUNCTION
The bevel 1s the shape taken by the thlck, supporting
metal of the blade as a thins down to the fine cuttlng Fig 9.2 It is hel~fulto regard the bevel as nothrng other
I
edge wh~chactually penetrates the wood. It can be than a very refined wedge, cleavzng the matenal

128
 ----- P R I N C I P L E S OF S H A R P E N I N G

I
underlying bevel. The importance of the bevel is
often neglected by beginners, who tend to sharpen
the very edge only, produc~nga secondary bevel that
gradually thickens in size (Fig 9.4). Getting the bevel
the nght shape is a major part of sharpening correctly.

1 -
The set of a camme tool IS the angle at wh~chthe
u

1 bevel has been ground on the blade; to put it another

way, how long or short the hevel appears. Carvers
usually talk about 'longer' or 'shorter' bevels, rather
than nammg an actual angle, because thin is how they
appear. When the outer bevel 1s flat, the hevel angle
is more or less the cutting angle: the angle between
blade and wood when the tool starts to cut. In a
V-tool, the cutting angIe 1s taken from the keel bevel,
as the apex begins to bite. The cutting angle is an
Fig 9.3 The wedEe-like achon of the bevel is evdent here, imporrant concept, as we shall see in the discussion of
causung the wood to splct cn advance of the cuttmng edge hollow, round and flat bevels (pages 132-6).
Invariably, a hevel will have been set on a carving
species of tree bmd together in d~fferentdensit~esand tool when it leaves the maker, whether it has
strengths, drfferences in the wedge-shape of the bevel been sharpened further or not. The grinding of the
are requlred to deal w ~ t hthis resistance efficiently. bevel may be part of an automated process in some
In the same way that carving proceeds from the factories, or it may involve a skilled person using an
main masses and forms through to the final details, industrial grinding wheel. But this bevel angle, preset
sharpenmg a carvmg tool 1s a process of refining the by the manufacturer, is not necessarily the one that is
I

Fig 9.4 Sharpening with

secondary bevel (shown
here on a carpentry chisel
where it is common
practice) is not the best
+3r carving tools
 WOODCARViNG TOOLS. MATERIALS & EQUIPMENT

wanted by ,the carver (Fig 4.5). There are varlous clr- needs of the individual carver. Someone buying a
cumtances m whlch a different angle - a longer or woodcarving tool far the first time may assume that
shorter bevel - may be needed. the shape of the bevel found on the blade is the cor-
One problem wlth pre-sharpened tools is that, rect angle for the tool and can not be altered. It ma!
while the bevel may mdeed be set at a useful angle, it be the cotrect set of bevel, but then agam, it may not.
may not be the most useful working angle for the If the angle of bevel you need is different from the
one which has been ground on the tool, then you will
have to begin by resening the bevel. Thls usuallT
wolves regind'mg.

There are two factors workitlg against each other m

the ser of the bevel. As the bevel becomes longer and
the wedge effect sha~per,the tool, in theory at least,
1s able to work its way through the fibres of the wood
with less effort. But the cost is In loss of strength -
there is less metal to buttress the cutting edge (Fig
9.6). As the bevel becomes longer, the cutting edge
big 9.5 1 he beel offared by the maker o j thls wol is abaut becomes weaker, until the fibres of the wood may be
45". It m a y never o c w to a newcomer to carvang that this hard enough to damage the cuttlng edge before being
can be, and needs to be, changed cut themselves.

'Blunter' but
weaker

Fig 9.6 The relationshzp

between shmpnsss and
-
P R I N C I P L E S OF S H A R P E N I N G

med~um-hardnessmaterial. It looks about twlce as

BEVELANGLE long as the thickness of the blade, when there is a
Correctly assessmg the bevel angle (or length) comes bevel on one side only.
as a matter of experience. The ovrrall angle - that of Soft woods Include plnes such as northern plne
the Inner and outer bevels comblned usually varies
- and yellow pme. These t~mberswere extensively used
between 20" and 30' (Fig 9 7). Remember, however, m the past, especially durtng the Regency period, for
that blades are of different thicknesses, and t h ~ sw~ll carvlngs on fire surrounds and panels. To reproduce
affect how long the bevel appears. these pieces and effects today, top-quality plne may
What bevel angles are needed, and under what st111be used.
urcumstances? The determ~ningfactor 1s the hard- Many people assume that the softer a wood IS, the
ness of the wood fibres. more easily it can be cut. But what actually happens
Wood varles between soft (such as pne) at one 1s that the sofrer fibres buckle before the advancing
end of the range and very hard (such as boxwood) at wedge of metal (Fig 9.8). The fibres may not reslst -
the other, with medium degrees of hardness (such as stay still long enough - to be cut cleanly, and so
lime or basswood) in between. The terms 'soft' and they tend to tear What is needed for carving these
hard' In thls context are functional ones, and should soft types of wood is a longer bevel, effectively a
not be confused with the b~olog.lcalterms softwood sharper edge, than mlght be expected. The keenness
and hardwood as defined m Volume 2, Chapter 6. drvldes the fibres before they crumble, givlng proper
The most common woods used for carvlng fall into clean cuts.
a middle range of hardness, and an outer bevel of However, wlth a longer beveI, the strength of
around 20°, as found on most newly manufactured the cutting edge 1s reduced. If a carving tool wlth a
tools, is appropriate for these The woods III this longer bevel, sultable for pme, is used on a harder
m~ddlerange of hardness d u d e l ~ m e(basswood), wood such as oak, the cuttlng edge wlll disintegrate
walnut, oak and mahogany - but even these woods and produce a scratched and tom surface. I t was not
vary ln denslry and hardness depend~ngon the unusual m the past for a carver to have more than one
cucumstances In whlch they were grown, whether set of carvlng tools: a special set of tools with extra-
there are any hard knots in them, and so on. An outer long bevels was kept solely for work on these very
bevel set at 20" wlll be sultable for most situations in soft woods. Conversely, some exotic woods available

Fig 9.7 What some different bewel angles look Lke

 WOODCARVING TOOLS. MATERIALS & EQUIPMENT -

Fig 9.8 Different beuel

angles are needed to deal
with different resistances of
wood fibres

A longer, therefore sharper,

I
111 bevei is needed

I
I

I
1
Very hard
wood
crumbles the
cutting edge ,ea A shorter, therefore stronger,
bevei is needed
I

I
I

today, such as l~gnumvrtae, are extremely hard. The

bevels for these woods need to be shorter for cutting
F~TNESS
edges to survive. The bevel can have three d~fferenrcontours from the
If a carvmng tool is not cuttmg easily or satisfacto- heel to the edge (Frg 9.9):
rily, even though the edge appears to be as sharp as
possible, it may be that the bevel needs adjusting to * ballow (concave)
be a lttrle longer or shorter. What is being sought at , rounded (convex)
the end of the day is the longest, and therefore
sharpest, bevel compatible wrth strength. * flat.

Rounded (convex)
/ <
bevel / -7

Hollow (concave)
/ -
bevel /
/
/
Flat bevel -7
/
Fig 9.9 Three rypes of
b w l pTo&
-

P R I N C I P L E S OF S H A R P E N I N G

In the prevlous d~scuss~on about the bevel angle, the It might be thought that a slightly hollow-ground
assumption was made that the bevel was s~mplyflat bevel 1s a better optlon than a truly flat one, as the
between heel and edge, without any secondary blade 1s more free to follow the cuttlng edge. W ~ t h
bevels T h ~ ISs the correct shape, and there are several t h ~ sbenefit, however, come two disadvantages. The
good reasons why this IS the best optlon. Let us con- first IS the Inherent weakness in a hollow bevel. As
s~derthe alternatives: the hollowness encroaches on the cuttlng edge, the
amount of mater~albuttressing the edge 1s reduced.
HOLLOW BEVELS The edge becomes effectively sharper, but weaker.
A hollowed contour comes from apply~ngthe bevel Secondly, a hollowed bevel rldes up on the edge of
to a c~rculargrmding wheel, which gr~ndsits own a cut, say when setting in, and working feels awkward
shape Into the metal. From the grmdlng wheel the and inaccurate compared with a truly flat bevel (Fig
tool may then be sharpened on flat benchstones, but 9.12). This relates to the so-called 'self-jigging' action
not enough to remove the hollowness completely that wlll be discussed later (page 137).
(Fig 9.10). A hollow In the bevel continues to exlst
between the two flat surfaces produced on the bench-
stones (Fig 9.11). ,

No support

-.

Fig ' low-giound beuel with secondary bevels at

heel and edge Fig 9.12 It is difficult for a hollow-ground beuel to 'sev-jig'

Hollow centre from

the grinding wheel

Fig 9.11 The effect of

honing a hollow bevel
(exaggerated)
 W O O D C A R V l N G TOOLS MATERIALS & EQUIPMENT

thicker wedge of steel has to be pushed Into the wood.

requlrmg more effort (Fig 9.14). Secondly, the carv-
ing tool will not start to cut the surface of the wood
until its handle is positioned higher than would be
the case with a flat bevel. In other words, a rounded
bevel gives a higher cutting angle (Fig 9.15). The
angle at which the tool cuts affects your ability to
control it. The lower the angle, the more control you
have when cutting - your hands rest on the wood and
work more surely. The higher the cutting angle, the
more awkward and uncontrolled the cutting becomes.
Rounding the bevels of woodcarving tools is a fre-
quent and major cause of their handling and cutting
badly, with unnecessary effort. It is a more common
fault than a bevel which is flat bur with an incorrect
angle. A seemingly small change from round to flat
bevels makes an enormous drfference to the quaht,
and control of cutting
The exceptions to this rule are the longbent and
shortbent chrsels and gouges. A slight round~ngof the
Fig 9.13 A uwir bought witl- ewe1 set but not bevel 1s acceptable here as an extenston of the bent or
shar~enedusually has a f i t bevel because of the hrge rounded shape of these tools, helping to J I the
~ edge
diameter of indwtnal grinding wheels. The bevel may also through its hollow cut.
be quite even and a good size, like this one

Leaving a hollow bevel is not necessarily a quicker

way of sharpening a carving tool, either. With
correct grinding, it takes no longer to flatten across
the whole bevel - so making the edge stronger and
lining up more accurate - than sharpening from heel
to edge.
New tools are sometimes supplied straight from
the grinding wheel, but, because the wheels used by
manufacturers are very large, the hollowing is imper-
ceptible (Fig 9.13).

ROUNDED BEVELS
Some hollowness, or concavity, towards the centre of
the bevel is preferable to a rounded or convex bevel.
A rounded bevel is produced by lifting or lowering
the handle during grinding or honing, thereby alter-
ing the angle at which the blade is presented to the
grinding wheel or benchstone.
A t the cutting edge, the rounded bevel has an Fig 9.14 Although the edge may look sharp, the cutting
obtuse profile - the opposite to that of a hollow- edge o j a rounded bevel gives a thicker boint of contact with
ground tool - with two results. In the first place, a the wood than a flat one, and a higher cutting angle
 P R I N C I P L E S OF S H A R P E N I N G -

Fig 9.16 A shallow, f i t beuel; note the relief gnnding on

the heel

Fig 9.15 A raunded beuel requires a sreepa cutting ungk

FLAT BEVELS
Flat bevels cut most efticientlv and contribute the
greatest amount of strength to the edge for a grven
degree of sharpness, wmpared wmth hollowed ar
rounded bevels. The cutting angle can be accurate
and low (Flg 9.16); and the bevel will selfqmg (see
page 137) along the face the edge is cuttmg, It is no
more trouble to sharpen a flat bsvel than any of the Stialght keel
other sha~esso fat discussed. The nracticalitles of
producing accurate, flat bevels are dealt with in
Chapter 12.
One final point about V-took: the keel - rhe line Deta~lof angle
of metal at the angle where rhe two s~desjoin - 1s the
maln part of the bevel that is rubbmng the wood dur-
ing its cur. As such, it should be like the bevels of
orher straight tools - flat from the cutting point to the
heel. However, the keel is slmghtly softened by round-
ing it from side to wde, and is nat kept as a knife-llke
- -

Fig 9.17 The a c t d angk a7 apex of a V-tool, slung &t

-

angle (Flg 9.17) This helps the blade slide along its keel, IS slightly rounded, the keel rema~nsso'aght &raghut
groove and cut curvrng lrnes more eas~ly. 1% length
 W O O D C A R V I N G TOOLS. MATERIALS & E Q U I P M E N T

SECONDARY BEVELS Some carvers sharpen only the very edge of their
There are rhree things which increase the cutting
carving tools, producing a small secondary bevel
angle and make you feel less m control of the tool:
This in effect thrckens the wedge of metal, as the
angle of the secondary bevel must be greater than
sharpening at too steep an angle in the first
that of the prrmary one. The secondary hevel gets
place
longer with each sharpening, whrch gives much the
rounding the bevel same effect as increasing - the cuttmg- angle
- of the tool
tncluding a secondary bevel
(Flg 9.18). Eventually the tool will need regrinding
Sharpen~nga secondary bevel is more often than I
I -
not an ill-directed hahrt. It takes the same amount of
time and effort to present the bevel flat to the bench- -
I
stone and oroduce a contmnuous. flat bevel from heel

1
to edge at the outset, as ~tdoes to produce a secondary
bevel. A blade wrtb a flat bevel wmll only need
I
4q
I
I
regrindmg if, say, a comer 1s broken, not because the 1
I bevel angle has changed. So secondary bevels cannot

I
I
I be recommended.
5 INNER
AND OUTER BEVELS
1
I If you compare a carpenter's chisel wtth the flat firmer
I
chmsel used by a woodcarver, one difference is imme-
diately apparent: wh~lethe carpentry chisel has a
I
1
I bevel on one ride only, the finner chisel has a bevel
on both sldes. An echo of this occurs in carvrng 1
I gouges, where a second bevel IS usually found on the
I

I inside (Figs 9.19 and 9.20).

A lot of books on woodcarvmg neglect the inner
Fig 9.18 Reshmpenmng a secondary bevel Increases the bevel altogether. Although there are instances where I
thzckness of matenal beh~ndthe cutang edge and therefore the an rnside bevel IS not needed, or may even he un-
effortnneeded to cut wood, the tool will need regcnd~ngat desirable, the practice m the woodcarving trade has
some poznt always been to sharpen an inside bevel on straight

/
Inner
(inside)
bevel

Outer (outside) bevel

Fig 9.19 inner and outer
hcvels on a carving gouge
 P R I N C I P L E S OF S H A R P E N I N G

on the cut surface, which then acts as a guide,

or jig, for the rest of the blade. The chisel will cut
accurately in a straight line, provided it is pushed
sympathetically (Fig 9.21).
There is no equivalent flat face to a carving chisel
t h e flat bevel may have some self-jigging quality but,
being so short a surface, the effect is negligible.
Although carved surfaces can look very flat, on close
inspection they have usually only been wurkcd
smooth enough to appear flat to the eye. Often a finger
can detect shallow facets where the surface has been
finished with a flat (no. 3) gouge.
In normal use, woodcarving chisels and gouges
enter and leave the wood continuouslv in a fluid pro-
Fig 9.20 The well-stropped inner bevel, seen from above, cedure which is not aimed at creating surfaces for
exact, functional purposes. The self-jigging action is
gouges for the several advantages it gives. I t may be not, therefore, appropriate. Having said this, carvers
helpful to summarize these advantages. A n inner often have a few carpentry chisels in their kit for
bevel on a straight carving gouge: those occasions when true flamess is required. Also,
some carving procedures - such as the rounding over
eases away the wood chip or shaving from the
blade as it cuts, allowing the cutting edge to
proceed through the wood with less effort
facilitates using the gouge in a reversed ('upside
down') position
shares the overall bevel angle between the inne
and outer bevels, which allows the outer bevel t'
be longer, Lowering the cutting angle and giving
greater tool control
strengthens the cutting edge by placing it more
towards the centre of the steel, where it is
buttressed on both sides.

It is only fair to say that these points are debatable. It

is worth looking into the reasoning behind the use of
inner bevels a little further. The difference between
the single-bevelled carpentry chisel and the carver's
double-bevelled firmer chisel can be used to illustrate
some important aspects of how woodcarving tools
and bevels work.
Carpentry chisels are used mainly t o make wood-
working joints, such as mortise and tenon joints, and
to pare accurate, flat surfaces prior to gluing up. The
flat face causes the tool to be self-jigging as the edge Fig 9.21 The fit faze of a carpenter2 chisel is self-ji@ng
enters the wood, the flat underside of the chisel rests and runs along the line of its o m cut
 WOODCARVING TOOLS, MATERIALS & E W I P M E N T

of berry (pea) ~~ouldmgs -may work better without pivot around the heel and remove wood chips and
the inside bevel; but these are more the exceptLon shavings is essential to the acr of carvmg.
than the rule. Many beginners fail to understand that shavingsof
As a practical exercise, take a carpentry chisel wood can only be removed cleanly while the cuukg
and, with the unbevelled side of the blade down, cut edge ts naming th~oz($hthe wood. It is not enough to cue
a gat face across the edge of a piece of saftwood. The into the wood wtth a gouge and lever down on the
jigging action can be observed, helping the blade to handle to prEe a waod c h p away this only blunts
-

line up. Now t t y to Ilft the blade out of the wood, the edge, and might actually break it. The edge can
while continuing to cut, by lowwing rhe handle. You only work with the heel in the way descr~bed,and rhe
will find thls difficult, dnot irrrpo$slble, to do cleanly: chip cr shavmg can only bt. cut clmnly, if the edge ts
the edge tends to snatch and break out the wood in a c d y b a g pushed fo~lsanlsthrough the wood.
front of tke blade. If you rake a long shavmg with a double-bevelled
Now turn the ehlsel upside down so the bevel is chisel ar gouge, you wtll find that the shaving curls up
towards the wood, and repeat the exercise. You and away from the blade and does not remam
will see how much more difficult it is to cut a truly straight; a s~milatcurling effect is seen ina carpentry
flat face, while at the same time how much a s h plane (Fig 9.231.This curling is the result of the shav-
~t is to cut out of the wood by lowerrng the handle ng being forced upwards by the top bevel (against rhe
(Fig 9.22). cap iron or chipbreaker in a plane). The underside of
When the bevel is down, the heel end ofthe bevel the shaving is broken but the top remamns intact and
acts as a fulcrum, ltfting the edge to brmg LC out ofthe compressed. The different temions curl and dear rhe
wood. This ablhty of carving chisels and gouges to shavmg away from the blade as it is cut.
- - - - -- - --

The flat face

behaves like an
infinite bevel

in the wood

i--
- 7y-
-

The edge pivots

on the heel and

Fig 9.22 The effect of

turning a carDenter's
(single-bevel)chisel upside
down is to allow the cut to
pivot on the heel of the
bevel; try this
F

P R I N C I P L E S OF S H A R P E N I N G

This side of
shavinq broken
Cawing gouge
with inside
bevel

--
-\=- -
-- -
~j
-

6-
-

Front secjion of sole Plane iron

Fig 9.-- % henslde bevel helps to curl the shadngs wp and awuy fiom the cut, rn the same way ar a jainerk plane

Putting an inner bevel (in-cannel) on carving gouges Another occasion where an tnner bevel 1s an advan-
im~catesthe effect of a carver's double-bevelled tage occurs when a gouge xs used upside down, with
firmerch~seland, as the inside bevel curls the shaving the mouth (the concave side) to the surface of the
away, the edge cuts thraugh the wood more easily wood. In this position, a gouge wlll shape rounded
CFtg 9.24). forms: beads, reeds and so on; the ~nnerbevel enables
the edge to negot~ate and leave the cur more
easily. Being at such a shallow angle, the inside bevel
normally lacks a true heel, and rends to merge wltb
the cannel, but it helps nevertheless.
The actual amount of bevel on the insrde varies It
tends to be longer on a flatttsh gouge, and can be as
much as one th~rdof the length of the outer bevel.
The quicker the gouge, the shorter the inner bevel 1s
ltkely to be. The deepest, U-shaped gouges [nos. 10
and 11) are not used upslde down and will have very
short, t~ghtbevels, servlng only to direct the shavmg
up and out of the narrow cannel better.
A Iow cutbng angle - the angle at which the cool
h to be offered ro h e wood in mder for it to start
cutting - gives greater tool control. A law cuttmg
I /
,
,
/
angle is caused by a smaller outer bevel angle as it
rests on the wood. But, as we have seen, this means
I a weaker edge. An ~nnerbevel keeps the cut tin^

Fig 9.24 The mner b e d dwects the shaang out of the effecrivelv buttressing ir from both sides. Being short,
mowh of the gouge, easmgrke passage qi & tool the inner bevel offers less resistance than a single

139
 W O O D C A R V I N G TOOLS. MATERIALS 6 E Q U I P M E N T

bevel with the same overall angle would do (Fig which braces and strengthens it. Carvers tackling
9.25). This is one good reason for having an inner very hard woods may consider placing the cutting
bevel: it gains you a lower cutting angk while maintain- edge quite far towards the centre of the blade by shar-
ing toughness. ing the total angle of bevel more equally between the
When considering the strength of the edge, it is inside and outside.
important to remember that when the edge rocks
rout of the cut on the heel, quite a lot of pressure is
"exerted on it by the wood chip. The cutting edge
DIFFERENCES
IN CUTTING
PROFILE
;of a blade with a single bevel is only supposted by
.the steel on one side. With an inner bevel as well, the The configuration of the cutting profile - the longl-
scutting edge is moved towards the centre of the blade, tudrnal section through the cuttlng edge (Fig 99.6)
and is now buttressed by the steel on both sides, - varies between tools. Not all tools have the same

S i g 9.25 Although a short

I
inner beuel tncreases the
overall angk, this is not at
all the same as a solzd

effort to push throug

wood

-. \
Fig 9.26 The idea
cutting pafile for most
\
n,rter bevel
carving gouges throws the
cutting edge towards the
-
PRINCIPLES OF SHARPENING

th~cknessof metal, or the same angle or disposmon of the metal, formed by the forging and heat meatment,
Inner and outer bevels, for example. which glve it suength and resdience.
U-shaped gouges (fluters and veiners) and V-tools, T h ~ wondehl
s edge is a refinement of the bevel.
which are not used ~n the reversed or upside- But, in add~tionto the flatness of the bevel, the besr
down posltion, tend to have a significantly cut, feel and efficiency is only gained from the carving
shorter inner bevel. tool when a certain form is glven to rhe cuttlng edge
and bevel as a whole. This form includes:
The flatter the gouge, the longer the Inner bevel
IS; cuttlng ln the reversed posltion is a prrnclpal edges at right angles to the blade
funct~onof these gouges. straight edges
Inner bevels are not normally put on the curved
sharp comers
and bent gouges. The curve of the blade itself
directs the edge through the cut, and these tools even thickness.
are never used upside down
These particular features need to be borne in mind
Not all carvers dec~deto add an mner beveI to 'their whde sharpenmg. They can be regarded as standards
gouges, but there are enough good reasons and advan- at which to alm,
tages ro make thls practice worthwh~le.

THE CUTTING EDGE Carving tools, w ~ t h r h eexception of skew ch~sels,are

sharpened wlth the cuttlng edge at rlght angles (90")
to their longitudinal axis (Fig 9.27). Apart from the
If you examine the metal of a blade's cutting edge skew ch~sel,it is not necessary to give carving tools
under a microscope, a crystalline structure can be skewed edges, although there are some skewed gouges
seen. The carbon and iron, together with any other that have appeared on the market falrly recently. This
additions makulg up the steel, form themselves into point needs exploring fur&er, as it relates to useful
tense crystal lattices. These lattices are the 'gram' in rdeas about the actual technique of carvmg.

Straight chisel Fishtail V-tool Stmight gouge Fig 9.27 Cutting edges at
right angles (90') to the
longitudinal axis
 -
WOODCARVING TCIOLS. MATEKlALS & EQUIPMENT

Skewed fishtail chisels go back a long way. E t c h i n ~ its collection (inventory no. 1875-53); it is illustrated
depicting carvers at work from the lare in Volume 2, Chapter 3.
Gorhic-Remtssance period (around 1480-1530), Skewed gouges have never been in the standard
which rdudes the work of such preemment names k ~oft the carver anywhere. That skewed cheek have
as T h a n Riemenschnelder, depct such toola in use a long history reflects the general usefulness of the
(Ftg 9.28) - but nor skewed gouges. 7 h e Science skew chisel to the carver. The corollary can also be
Museum in South Kensmngton, London has an made! the reason that skewed gouges have never
example of a Chlnese skewed fishtail &sel with a appeared as standard reflects their comparative lack
socket instead of a tang, daring from atound 1850, in of usefulness, even though carvers might fie1 the
need fm a skewed edge under some circumstances
The recent introduction of skew gouges seems to me
to answer a need which is not really present, at the
same time sacrificing other useful qualities that right-
angled edges have. On the other hand, some carvm
do find such rdnements useful (see Chapter 6,
pages 101-2.).
One poinr even in favour of such gouges is chat
their obltque edge slices the wmd in a similar fashron
to a guillotme. However, this effect can be achteved
more simply by an appropiate cuttine;action with an
ordmry gouge. A gouge can be pushed dead srraight
along the wood, or it can be given a winding*sl1cin.g
dn en$rnuing by'Hans &q&mdiiri action by rotating the ~ 1 s oft the pushing hand as
a r o u d 1500;illuspmtions of tkk the cool advances. The gouge is thus rotated or
p e d often show skew chksls i n use 'rocked' through i t s at, sl~cingrhe wood (Fu 9.29).

Fig 9.29 .licing cut: a basic and very important caruing t e c h n i q ~

142
 P R I N C I P L E S OF S H A R P E N I N G

Tig 9.30 Three profil

cumng edges (a) pant
or nosed, (b) wmnged, i
a b c ( c ) stratght

I Thlsslicing
- cut can be made to the left or the right,
and to a greater OL lesser degree as needed. Such a
&cmg cut is a 'very basic and important carving
STRAIGHTNESS
- --- - - -

The cutting edges of carvmg gouges and chisels can

I
technique, which beg~nne~s need ro master as early as
possible. There is no need to skew the edge of a gouge
EO kchieve this particular effect.
.
have one of three profiles (Fig 9.30):
fiecmtra~
117 ----
nf
-A -Xb- mlri---
-.' dm.,.-,ntnml~e
to some extent - ~tis said
ill__-~~

The only gouges wlth which thts sllcmg cut is be nosed or bullnased.
not pmsible are those based on a U-shape (nos. 10
and 11). Since the sweeps of all other guugrs are The central part of the edge may recede behu
based on arcs of c~rcles,the edges can be applled wrth the cornexs - the comers p r o d and a n be
I a winding stroke. Firmers can alsa be used with a described as wing;ed
shcmg amon. = The central pan of the edge may him a suakghght
The 'square-od' orlentatton of a cutting edge is lme with the comers, in addition to being at.
also essenrml for clean ~ettiag.in, allowing- the tool -
right andea
- as discussed above.
m be I d up accurately and easily in the wood.
A skewed edge makes settlng m more difficult. Each ophon grves rlse to different effecrs as rhe tool

I Again, for all practical puqoses, almost any corner

can be cleaned w i l y with a small range of stra~ght
and shonbent skew chisels. It s nor necessary to
is used:

NOSED EDGES
skew a gouge to produce a long corner For this sort A woodcarvmng tool bought 'set but not sharpened'
06 purpose. (that a, with the bevel ground to a rough shape)

143
Fig 9.31 Setting in
cleanly to the next plane is
dificult with a nosed edge,
which tends to leawe cut
marks

quite often has a nosed or 'lady's finger' psofile. the

centre of the edge protrudes beyond the corhers to
form a rounded point The effect may also be called
'pointed'. V-tools may somerlmes appear this way,
with the angte pushed forward, sometimes qurte Ear
beyond the corners. These shapes are a product of the
forging, wtth the shape perpetuated in the grinding.
Beginners often assume, wrongly, that thls must be
the correct shape fox the tool, whereas the manufac-
rurers assume that the carver will be alrering it.
This pointed stare of the cuttlng edge is the least
useful of all the three options, for several reasons. In
the first place, setcrng in the purpose of which 1s to
-

relieve one plane of the design from another - looks

best when the planes purposely and cleanly meet. It IS
difficult, d not mposs1ble, to get an exactly stratght Fig 9.32 A bdnosed goug~tends to tear the wood mwizrdr
bottom to the cut when a bullnosed gouge enters the the sides of its cut
wood, as the projecting centre will always tend to
leave a scab mark (Fig 9.31). The round end is the tenson with the sides. Even d the w o d towards the
wrong shape to set in crisply and cleanly, except for 'sides of the cut 1s nor actually tom, there i s sttll a ten-
vay particular conditions where some feature of a dency to produce a less clean surface. This effect IS
carvtng, such as a moulding, calls for it. mcrea5ed m propornon to the extent of nosing, To
The second reason why a nosed gouge or chisel is some exrent, a build-up of tensron lrke chis must hap-
a poor opcion is that, with thts profile, the useful cor- pen wlth a straight-edged gouge also, but temon is
ners are lost This is dealt with in more detail in the always quickly and adequately rel~evedas the surface
next section. is cut before the wood underneath.
The final, and least important, reason for not Having said that, nosed gouges do occasionally
having a nose on gouges or V,t~olsinvolves the way have specific uses. An example m~ghthe the common
inwhich these m01s l ~ k toe cut wood IFtg 932) Widx gouge-cut ornament shown in Fig 9.33. Here, setting
rhe centre of the cuttlng edge leadrng and cuttrng the in with a nosed gouge gives you a vertical cut which
wood before the srdes enter, the central part of the neatly matches the sweep of the seeond, horizontal
shavmng advances prematurely up the camel, creating cut as tt meets to remove the chrp.
7

PRINCIPLES O SHARPENING

.
933 The wtical a t 6 in these ' h r n h d mot& ean
be nuude more d y vdth a ihb~tdgouge dmi n square &
n
Ftg 9.35 A winged V-tool or deep goargc wdt wk good,
&an m&g cw,&ugh kss me@ in other wntrxts,

WINGED ED@ES For general w i n g xI advrse keeping all gauges square

G o t n ~to the other exkern, a clltting edge with the acms unless there is a compelling readon to do
corners advanced gtves rlse to smibr problems of set- orherw1se, square i s the most w f u l shape. But if you
in as a nosed gauge (Fig 9.14). However, there 1s are carving a lot of flutes or p v e s with deep gouges
a partrcular iflstmce where rhwshape does score over - in the veins of acantkus foliage, or example, or zn
the straight-across edge: running groove wrth the hair - then consider hawlga selection of deep gouges
deep U-shaped gouges (Fig 935). Because the wood t&d forward at the comers, and kept expressly for
at the surface iif the groove is cut before tke wood in thts purpose.
the cenae, the shaving will a1urz1.y~come away cleanll:
even on a side wbxch is cutting against the g&, as STRAIGHT EDGES
' when rounding H curvet The disadvantage is that it is Straight edges give the best ofall worlds: clean setting
I impossible to run thegroove&into verriodl walls, ar to in, u~efuIcornea and clean a*ts. Forgeneral purpases,
sharpen all gouges-, chmels and V-tools, straight or

'Fw9.34 Settihg in
alermy to theyre~fplan@ is
d $ d wcth u winged mol,
m the curneqs rend, w cuc
h e h e r tArm antended
 -WOODCAWING TOOLS. MATERlALS & EQUIPMENT

Stra~ghtgouge Fishtail Straight chtsel Skew chisel V-tool

bent, with thecumng edge i w a straight lme from cvc,

ner to corner and at 90°" to the lrmgitudiml axii(~;s
9.36). Thrs makes p w b l e accurate s ew inand full
U6eofrheedge.
A wavy or nor&& edge is usually s o t acceptable
- dependingun #hedegree of irreguhity and vuhedxer
it hati any effect on the work, If care is taken, sh&p
enmng the.edge to such a shape can be avoJded.

CORNER$
The imporrance of maintaining rhe full width and Fig 9.37 Th rst be
cons~deredan extremely
shape of a woodcarving tool, nght into the comers, mqmmnt part c$ tAe cmting edge
needs sawing (Fig@937 and 9.38)., B~ginmfsm
particular do not apgreuate, 0s make full use of, rhe and ~ccuratel~;
setting; m cl&g into angles and
corners ofguu~esor chisels. It is dl t
m easy to aye% comes; and so on. Comm are often wed more i~ &e
sharpen the comers and reduce a tool's w e a e s s . fashan of knives. A tool such as the skew chtsel is
Caners aresingled our for use c m t h u ~ u d iynthe really dnly a glorified corner; and a skew with its loT
routme of awtng: for loming surfaces or planes neatly pointed comer misstry? is effedvdy crrppld Fishtail

Fishtall Skew ch~sel Stra~ghtgouge

Fig 938 Comers we i n @ m t mv!&gparts afmtdngrocrle ahd s W be kept

146
 P R I N C I P L E S OF S H A R P E N I N G

tools also have emphasized comers for getting into With an even wall, and a flat bevel shaped evenly
awkward recesses. Paying attention to the comers of from side to side, the heel will lie parallel to the cut-
all carving tools is an important aspect of sharpening. ting edge (Fig 9.40).

EVEN THICKNESS
The steel of which a carving blade consists ought to
be of even thickness across its width, and thls unifor-
mity should be maintained along its length, even
though the blade may thicken towards the shoulder.
An uneven thickness can mean some parts are weaker
than others.
Uneven wall thickness can become a real problem
in the V-tool. If the two sides are not of equal shape
and thickness, with the cannel lined up truly down
the centre, the tool can be impossible to sharpen chr-
rectly (Fig 9.39). The condition needs to be assessed
first, and corrected where possible, before time is Fig 9.39 11 thickness i n a V-tool may sooner or
wasted on sharpening. later cause sharpen~ng

?ig 9.40 Edges

houid be parallel
 W O O D C A R V I N G T O O L S . MATERIALS & E Q U I P M E N T

THE H E E L heel follow after the cutting edge, they rub the surface
of the wood and burnish it, which adds tremendously
to the appearance of the work. However, if the heel k
The heel is the angle formed as the bevel meets the too keen a ridge, it will roughen or score the surface
blade proper- one can imagine the cutting edge to be of the cut as it passes, rather than smooth it. To avoid
the 'toe'. The importance of the heel in the carving t h ~ effect,
s the heel needs to be slightly rounded over.
stroke has already been mentioned, but a couple of smoothed and polished; but only the heel - keep the
further points need to be added. rest of the bevel flat (Fig 9.41).
Firstly, a flat bevel will make the angle of the heel The best way of smoothing the heel is on a fine
quite sharp and well defined. When the bevel and benchstone, not on the grinding wheel. Leave it until
the blade, with its flat bevel, is completely sharp, and
then soften the definition of the heel as a final act.
This softening also applies to the heels of the
V - t o o l the two proper heels, as well as the point at
the base of the keel where it meets the main body of
metal. Slightly rounding the keel itself prevents a
sharp angle scoring the bottom of the groove. It also
helps the tool slide round and navigate comers more
easily. The keel itself should be kept flat and straight.
One further refinement involves removing facets
towards the sides of the heel; thinning the metal here
allows the comers to get into tighter recesses (Fig
9.42). The facets can be produced on the fine grinding
wheel, after the tool has been sharpened; take care
not to remove metal from the comers of the cutting
edge. Although this feature can be useful on any
Fig 9.41 Slightly softening the heel smwths ~upassage over carving tool (see Fig 2.19, it can weaken the edge.
the waod Do it to a particular tool when circumstances require.

r; - --

I
Do not run the facet as far as

I the cutting edge

rrg 3.42 Facets m the s~deo j me oeuet uiww the comers to get 'rrru rrgrrr ~ r ~ r umore
r , easily
 P R I N C I P L E S OF S H A R P E N I N G

There are many advantages to working an inside

IN BRIEF bevel on straight gouges and throwrng the
cuttmg edge towards the centre, especially m
Sharpening a carving tool for the first trme IS a matter those tools that will be used in the reversed or
of aimrng to do the best you can, but it must be upside-down posmtron.
attempted In the r~ghtway. There is no point in The cutting edge, wrth the exception of skew
spendrng an equal amount of time sharpenmg the
chisels, should be square-on to the long~tudinal
tool wrongly
axis of the tool.
All the polnts so far discussed - the bevel wmth its
appropriate angle and shape; the curting edge and its Keep the comers.
profile; the heel and so on - may seem a l~trlemuch Make the cutting edge stramght from comer to
for a beginner to take in all at once. Some tools are
comer and parallel to the heel.
not so easy to sharpen, and it may be that you con-
cede a little on the shape. But do the best you can. Slightly round over and pollsl~LIICheel after
Then each time the edge needs touchmg up, imp~vve sharpenmng.
r t a httle further untrl the tool anives at as perfert a
shape and sharpness as you can grve it (Fig 9.43).
I have trred to make the informat~onm e logically THE SECRET OF SUCCESS
out of how carving tools work for the carver, and
what can be expected from them. The followrng sum-
mary gathers these pomnts together for reference and There is a particularly straighdonvard approach to
~ v e ans overvrew of what you are looking for. sharpenrng carving tools which, if followed rigorously,
rs more or less guaranteed to lead to the cuttlng pro-
Keep the bevel flat fmom rdge to heel, w ~ t han
file and edge that is wanted.
even thrckness from s~deto s~deand no
Look at the end of any unsharpened gouge, which
secondary bevel.
has only been set by a manufacturer. The very blunt
The angle (length) of bevel needs to be adlusted edge can easmly be seen reflecting lrghr, and appears as
according to the hardness of the material to be a thick, shiny lmne (Frg 9.44). a s 1s called the white
carved Overall angles vary from 1 5 O to 30°, with line or line of light. These terms will be used synony-
20-25" being suitable for most purposes. mously to refer to the vmsrble edge.

Fig 9.44 T h e white

line or line of light -
the visible edge - is
seen by orientating the
edge to a light source.
/I/ A linle practice will
Fig 9.43 A tool w ~ t ah strarght edge, comers present, and soon make this a n
f i t , polcshed bevels mnstde and out easy procedure
 - W O O D C A R V I N G T O O L S . MATERIALS & EQUIPMENT

This line of light is your primary guide to the state of really close look at the line, help~ngto decide what
the cutting edge. By constantly checking the thickness state the edge 1s in. Pushing the edge Into a piece of
and distribution of this visible line while sharpening, medium-hard waste wood will also toughen and
the quality of the potential cutting edge is monitored emphasize the edge to reveal any remaining white
(Fig 9.45). The thicker the line of light, the thicker line or speck (Fig 9.46).
the edge of steel, and vice versa. As the tool is sharp- A n uneven line of light indicates that some parts
ened, the line gets thinner and thinner. When of the edge are thicker than others. Continuing to
the edge reaches 'sharp', the line of light will have sharpen in the same way will produce an uneven,
disappeared. The crystalline structure of the edge has wavy cutting edge, perhaps with missing comers.
been made so thin as to be no longer visible to the Small spots or areas of light along the edge will be
naked eye. echoed in scratches to the surface of the wood as it
To reflect the light, the edge of the carving tool is cut.
must be orientated to the light source in a way that This line of light is the first indicator of the state
displays the white line. You may think the white line of sharpness of the cutting edge. Returning to the
1s gone, only to have it reappear when the blade is unsharpened carving tool, look at the bevel, where
tumed around a little scratch marks - probably quite coarse - will be seen
When the edge m approachmng sharpness, the line (Fig 9.47). These marks result from the grinding-
of llghr attenuates and can be a l~ttled~fficultto see. wheel abrasives which were used to set the bevel. The
Somettmes a magnifying glass is useful for havlng a scratches will change in appearance as the bevel 1s
sharpened on progress~velyfiner grades of stone (Fig
I 9.48). From these marks, mnformatlon about the state
' - of the bevel can be gamed: ~ f f iflamess, evenness, how
Even white line of light
~t is being applied to the stone, and so on (Fig 9.49).
Thicker
So there are two mdicators we can use to assess
A I
how the sharpening IS coming along:
the white line of light
the condition of the bevel surface
Thicker
1 4 /
Both the line of lmght and the bevel scratches show
where metal u to be removed and - equally Important
Absence of light
-where metal is not to be removed.

Spot of light
i ,
Nicks will leave
scratch marks as
the edge curs

Fig 9.45 T h e width of the white line reveals the thickness Fig 9.46 T h e white line of light is getting thinner and more
of metal along the cutting edge u n i f o m , but is still clearly visible all alonE the edge
I P R I N C I P L E S OF S H A R P E N I N G

Fig 9.49 The scra.~..~,:awards the heel, as well as the

7 Coarse scratches on a bevel which has 1 polished metal towards the edge, would suggest that the bevel
1ur1u uut not honed; you will need to orientate the to is rounded and not f i t

The key word in using these two indicators is evenness.

Sharpening involves a balance between removing
inetal from the bevel and leaving it on; and you need
to ~roceedin an even, regular way (Fig 9.50). The
secret of successful sharpening. is co.~sta&y tp allow

I Fig 9.48 D~iferentpattern ofscratch w k i on the Leuel

I result from the action of specific abrasiwe stones

 -
WOODCARVING TOOLS. MATERIALS & EQUIPMENT

the line of light and the surface of the bevel to guide quickly by raising the handle and working more or,
the next step, maintaining an even appearance from the edge. But the result will be a rounded or second-
start to finish. ary bevel.
Where part of the white line is thicker than What has happened will immediately be obvious if
another part along the edge, this part must be worked the scratch marks are looked at occasionally - the'
on specifically - whatever stage in sharpening you are will not be evenly distributed across the face of the
at - to bring the line back to a uniform thickness. It bevel. By checking the bevel in this way, the handle
is important to put this same point the other way can be lowered appropriately and the flatness of the
round: where the line is found to be thinner, this part bevel re-established.
of the edge needs to be left alone and consciously
avoided until the rest of the metal has been brought
to the same state of thinness.
As the abrasives used to sharpen the blade get
finer and finer, so do the scratch marks in the metal
Starting wtth the gpndtng, through to the
of the bevel. The scratches of finer abrasives overlay
final sharpening, retain an even wh~tellne of
and hide those of the previous ones until 'a final
light, right up to its final disappearance.
polished surface is achieved. These marks can be
Continually check thls and the bevel surface,
observed on the bevel at a n y stage in the sharpen-
maintaming a uniform appearance to both
ing process, and the position at which the blade is
The main points, therefore, are:
offered to the sharpening stones should be adjusted
accordingly (Fig 9.51). the llne of light
For example, say a h e r chisel is put from the
the smface of the bevel
grinding wheel to a flat benchstone. If the handle is
inadvertently raised, the part .of the bevel towards the evenness from start to finish.
cutting edge will be worked on more than the rest.
If t h ~ advice
s is followed, there 1s no reason
The line of light will show the edge t h i n n i n g it may
not to aclxeve straight, acutely sharp cutting
even disappear, and the tool w11l be thought sharp.
edges, with intact comers and flat bevels.
Indeed, thms is often an expedient wlth begmnners,
who try to move the sharpen~ngprocess on more

Fig 9.51 Finer and

coarser marks on the bevel
may indicate that the
handle has been raised
during honing, which Lifting the handle on Previous work on
the finer stone a coarser stone
makes the line of light
disappear sooner, and
creates a rounded bevel
 CHAPTER TEN

IPME NT: C

To glve a brief overview of the sharpening process

and the equipment required
To conslder in detad the equipment needed for the
grlnding stage of the process

OVERVIEW by the gr~ndmgwheel - for removing metal qu~ckly.

At the other end are finelv dressed stro~s.the cut of
w h ~ c hpolishes the metal, Between these two
The equipment needed to sharpen woodcarving tools exaemes 11es a spectrum of artific~aland natural
IS relatively stralghtfonvard. It conslsts entirely of an stones with graded abrasive quallt~es(Fig 10.1).
assortment of abrasives which remove unwanred A blade moves along this scale from coarse to ever
metal from the blade. There is no trickery in it. These finer abras~vesm the sequence of shaping and sharp-
abras~vescan be thought of as a scale, or range At enmg its cuttlng edge Not all the elements ~n the
one end there are very coarse abrasives - represented scale are necessary or appropriate on any part~cular

n g 10.1 Sharpening is a pracess which starts with initially shaping the cutting part of the oiaae and setting the cutting
angle (commonly adding an inner bevel), and moves through a spectrum of abrarives to the j h l , sha* cutting edge.
On later resharpening only the later stages may be required, depending upon what the edge needs to return it to a cowect
. .
rre oj sharpness
 W O O D C A R V I N G T O O L S MATERIALS 61 E Q U l P M E N T

occasion. With practice, the carver can skip stages In the following chapters we will first look at the
and feel free to move around the scale, up or down, equipment in a little detail, then consider ingeneral
accord~ngto what is needed at that moment. terms how to use and care for it (Chapters 10 and 11).
A few terms need clarmfjrmg. Technically, the terms Next, points related to working the individual shape
grinding wheel or grindstone refer to the abraslve of tools will be dealt with (Chapter 12). The empha-
wheel itself and not the machmne. In practice, sis in these chapters will be on the traditional method
the wheel 1s inseparable from the mach~ne,which is of sharpening with oilstones and strops. Finally we
termed either a grinder or a bench grinder. shall consider some more recent innovations which

I Too all intents and purposes, benchstone, whet-

stone and honing stone all mean the same thmg.
Oilstones are st111 the commonest sharpening stones
some carvers may like to try. other types of sharpenmn?
stone (Chapter 13), and electrical sharpening system
(Chapter 14).
used by carvers, though nowadays there are a number
of alternatives (see Chapter 13).The word hone comes
I
from an Old English word for a stone, so 'honmng'
means 'stoning'. And whet derives from th: Old
BENCH GRINDERS
English hwzt, meaning 'quick' or 'active'; so a whet-
scone was a sharp, active stone, to be differentiated Whether a bench grinder 1s really needed or nor
from ordinary ones. Whetting, honing, and stoning depends largely on the sues and numbers of carvin:
synonymously descrmbe the act of s h a r p e n ~ na~tool tools to be managed. A carver with only a fen.
on a benchstone All these words are In common small tools may find that a coarse benchstone will
usage and have become a little confused. adequately do the job of a gnnder. A sculptor, on the
A point that was made about woodcarvmng tools other hand, with only a few but nevertheless large
themselves also needs to be made about the equip- gouges would find it laborious to use only bench-
ment needed to sharpen them it is false economy to stones; a bench grinder would save a lot of tlme,
buy an infermor quallty of emther. As with carvmng especially as some sculptors tend to use thelr carvmnz
tools, the expense 1s really an investment in personal tools ruthlessly. A grinding wheel at the coarsest end
satmsfact~onas.well as tune and money Good-quality sf the abrasive spectrum removes the most metal.
sharpening stones will last at least the lifetime of the most qumckly.
carving tools themselves. As long as they are looked If you are new to carving and do nor knoa
after properly, they only need to be bought once. You whether you are going to be hooked on the craft or
could say that buying a better stone is tantamount to not, you should probably leave the gnnder to start
upgrading your whole tool collection m one go. w~th.Worklng with flat bevels as recommended in
The sequence of sharpening a carving tool the last chapter, tools only need regnnding when
involves w o r h g along the range of abrasives UI the they become damaged. It may be sufficient to have
following order: access to a grmder, rather than actually owning one.
But a gnnder, while not essential to begln with, can
the grinding wheel
save a lot of time, especmally where there is serions
* coarse benchstones (and slipstones) blunting or breaking to the edge of a tool. Most
carvers end up with one.
fine benchstones (and slmpstones)
strops

The bench ginder sets the bevel and squares the edge; Modem grlnders are electrically dnven. There must
then the benchstones and slips refine and sharpen be some treadle- or hand-operated wheels out there -
thrs shape, and the strops polish it to produce the final not without the11 advantages - but they are vec-
worklng edge. unusual today. Some parts of the followrng discuss~on
 EQIIPMENT- GRINDERS

are applicable to them, but note that working adequate for the needs of the carver. There are many
arrangements that allow both hands to be kept free excellent and rel~ablemakes o n the market, as well
for controlling the tool o n the wheel are the best. as cheap imports. T h e wheels and bearings of the
Although hand grinders are slower and more 'friendly' latter tend t o be inferior and wear quickly. The two
than electric machines, less control over the tool is wheels will be of different grits but the same size, and
possible because one hand is always occupied turning positioned at either end of the motor shaft. Diameters
the wheel. vary between about 5 and 8in (125 and ZOOmm);
Electrically driven grinding wheels can be dry for our purposes a wheel of at least 6in (150mm)
(fast-running) or wet (slow-running). O n some diameter is reauired.
dry grinders a n abrasive belt may replace one of The wheels themselves are made of artificial stone,
the wheels. usually based o n vitrified aluminium oxide or silicon
Whichewer type of machine is chosen, proper eye pro- carbide. 'White' wheels designed for use o n high-
tection must always be worn. speed steel (as used for woodturning tools) can also be
used on carbon steel, though a fine grit is not usually
DRY BENCH GRINDERS available. Because there are two wheels to choose
Dry bench grinders with two abrasive wheels are the from, the machine is normally supplied with both a
cheapest option (Fig 10.2). An abrasive belt, as a n coarse and a fine grit of stone. It is useful if these grits
alternative to one wheel, is worth having: you can get correspond to those of your (artificial) benchstones.
a flat finish on the bevel quite easily and the blade Replacement wheels in a variety of grits can be
tends to keep cooler. Machines fitted with belts are easily obtained from engineering suppliers. The size of
more expensive. wheel should remain the same on either end of the
The wheels are mounted directly on either end of motor spindle, t o keep the machine balanced and pre-
the motor shaft, and so turn at the same speed as the vent undue strain on the bearings. Always follow the
motor - somewhere around 2,900rpm. There are pro- manufacturer's instructions when changing wheels.
tective guards around the wheel, as well as in front, When one or both wheels are replaced or removed
since high-speed cutting throws off particles and from the grinder, for whatever reason, they will need
sparks quite violently. However, properly used, a balancing o n the machine - rather like motor-car tyres
good-quality machine is quite safe, and, being about need balancing. There is often some spot on the wheel
the simplest machine in the workshop, it will last a denser than another and, revolving at high speed, the
long time. centrifugal force of this imbalance can create
T h e motor size of dry bench grinders varies unpleasant vibration as well as stressing the bearings.
between % and %p, the smaller size being quite To balance the wheels of a high-speed dry grinder,
follow these steps:
@ Unplug the machine and remove the wheel
guards from both sides.
@ Remove one wheel completely. Note that the
two wheels have opposite-handed threads to
prevent them unscrewing m use.
€3 Spin the remaining wheel freely, and when it
comes to rest, mark the lowest point on the rim
of the wheel with a pencil. Repeat this a couple
of times and you should be able to locate any
'heavy' spots, as gravity will pull these
consistently to the low point of the free-
swinging wheel.
 W O O D C A R V I N G T O O L S . MATERIALS & E Q U I P M E N T

Q Remove thls wheel and fit the other one to the

opposite side.
@ Mark the second wheel sim~larlyto the first.
Q Now replace both wheels, lln~ngup the penc~l
marks to opposrte s~des,so that the heaviest
pomt of each wheel counterbalances the other
when the machzne runs.
0 Tighten the wheels according to the
manufacturer's mstructlons and replace the
guards

WET BENCH GRINDERS

The motor of a wet grlnder usually has the same stan-
dard ratlng as a dry gnnder, but the speed of the wheel
Itself is decreased by some k ~ n dof reducing 'dr~ve. Fig 10.3 A wet pnder, showing the large, slow wheel m
T h ~ makes
s them a llttle more complicated and larger, rts trough on the right and a b u f i g wheel on the &t
although both wet and dry machlnes need space to
work around. The wheel speed w ~ l lbe around
50-lOOrpm, w h ~ c h1s slow enough not to fl~ngwater
out of the trough in w h ~ c hit revolves. The water con-
stantly flushes over the wheel, washlng away partrcles
and coolmg the blade, but obscur~ngwhat 1s going on.
There 1s usually only one, larger-sued gr~ndlng
wheel on a wet gmdlng machine; the wheel ir
approxtmately 8-10111 diameter by 1X-21n thlck
(20C250 x 40-50mm). A separate buffing wheel may Fig 10.4 Tlus sort of rnexpensive unit u now widely
also be included In the arrangement (Fig 10.3). These a~,ailabkBendes small abrasive wheels, r t can be fitted wtth
wet grlnders can be slgnlficantl~more expenslve than burrs and cutters for working directly on wood
the commoner dry-runnmng bench grinders. T h e ~ r
advantages are that they el~mrnatethe danger of tool bevel on a large gouge, wh~lethe blade 1s gripped m a
overheatmg; they do not fllng out sparks; and they vice. However, they do not have the same safeq-
generally operate m a gentler way. The Swed~sh arrangements as bench-mounted grinders and extra
Tormek range are regarded as good-quality and reh- care needs to be taken In then use - choose the slow-
able machines. est drtll speed and wear proper eye protection

ALTERNATIVES SPEEDAND FRICTION

Cheaper optlons for gnnd~ngInclude uslng an elec-
tric dr~llattachment or a small high-speed motor unlt Dry gnnders are des~gnedto remove metal qu~ckly:
(Fig 10.4). These are Inexpenswe altemarlves, but the wheels are coarse and the speed is h ~ g h ,and
suitable when only a small amount of light grmding is sparks of wh~te-hot metal shoot off dramat~cally
wanted, or as a temporary expedient. A bench grlnder into the air. Whlle this may seem fun, it can create
1s a better altematlve for the busy carver. two problems.
Quite small grinding wheels are available for dr~lls First, it IS very easy to over-grind - to grmd off
and tlex~bleshafts. These can be useful for some pre- more metal than you mtended. Somet~mesit is better
l~mmaryshap~ng- for example, puttlng an inner to use a coarse benchstone and take a l~ttlelonger to
 E Q U I P M E N T GRINDERS

set the shape precisely, rather than risk over-grinding Unfortunately the loss of hardness in the blued cutting
and destroying the shape. edge cannot be rescinded, and further heat treatment
The second problem lies in the heat generated by is needed to restore the temper. This is dealt with in
friction between the fast-moving surface of the wheel Volume 2, Chapter 3, but normally it is simpler to
and the tool. Overheating and 'blueing' the cutting regrind the blade back to an unaffected part without
edge - turning the surface blue - seriously damages further blueing. This is obviously a great waste of time
the steel. A short foray into the world of physics is and steel; it needs to be avoided from the start by
relevant here: by understanding how the heat is actu- understanding the causes of excess heat production.
ally generated, steps can be taken to minimize it. The amount of heat is related to the amount of
The difference between heat and temperature, friction, which is a product of two things:
while not often appreciated, is of real, practical
the speed of the wheel surface
importance to the carver. Simply put, temperature
is what is measured by thermometers, whereas heat is the pressure wlth which the tool 1s apphed.
the combination of this temperature with the mass of
an object. To take a common example: a dinner plate So the followmg three th~ngsshould be borne m
may have a lower temperature, but more heat, t h d a m ~ n dwhlle g r ~ n d ~ na gcarvlng tool:
spark. So a spark landing on the skin may hardly be
felt - its mass is very small and the heat disperses THE MASS OF METAL
rapidly into the skin. But a dinner plate at a lower The effect of the amount of metal being offered to the
temperature has a much greater reservoir of heat wheel on how quickly the temperature rises has
available to raise the temperature of the skin. already been mentioned, Grinding with a fast, dry
Referring back to carving tools, two principles arise: grinder should not be taken beyond a certain thinness
of metal - not only because of possible overheating,
The larger a chlsel or gouge, the slower its
but also because metal needs to be left for the finer
mcrease In temperature on a g r ~ n d ~ n
wheel
g
abrasives to work on.
The thinnest parts of the blade - the parts with
the least mass; will increase in temperature PRESSURE
faster than the thicker parts. A light pressure, enough to steady and direct the tool,
is all that should be applied, allowing the wheel to do
In other words, the tools which are most susceptible the work. The faster the wheel, the lighter the pres-
to overheating are the smaller ones, and the most sure. Even though these dry grinders work quickly,
vulnerable parts of any tool are the corners and edges many users still get impatient and apply the bevel too
- for example, the point of a skew chisel and the arduously and for too long. A t fast speeds, events
comers of fishtail gouges. happen quickly.
The hardness and toughness of carving-tool steel A small point is that the coarse wheels, with a
is brought about by specific heat treatment, a process more open grain structure, cut away more material
which can be undone by reheating the blade. Above but actually create less friction than the finer stones.
a certain temperature - around 2 3 5 T (455°F) - the Blueing therefore tends to happen more often on the
metal starts to anneal, softening towards its original finer stone - also, in part, because the metal is rhinner
unhardened state. When a blade turns blue on a at this stage.
grinding wheel, the temperature will have reached
somewhere around 300°C (572°F). It now loses its SURFACE SPEED OF THE WHEEL
ability to hold a cutting edge, and dulls rapidly. The speed of the motor on a commerc~algr~nder1s
Blueing usually starts in one spot on the edge, or at fixed, but what actually matters 1s the surface speed
a comer. It is all too easily done, and it happens of the rotatlng wheel itself. The surface speed of
very quickly. larger wheels 1s proport~onatelyfaster than smaller
 W O O D C A R V I N G TOOLS. MATERIALS & EQUIPMENT

ones - motor speeds between grinders being similar. surface, so producing a flat bevel morerasily. They are
An Sin (200mm) wheel generates a quarter more less common than double-ended wheel grinders, but
heat than a 6in (150mm) one at the same rpm, other are worth considering. Remember to check that the
things being equal. toolrests are adequate.
A serviceable low-speed bench grinder is not hard
to make. Slow surface speeds enormously reduce the KING A LOW-SPEED
heat generated by friction. Some notes and guidance GRINDER
for making a low-speed grinder follow.
For many years I used a low-speed dly grinder which
BELTGRINDERS I made myself (Fig 10.5). A machine of this type has
several advantages:
The abrasive surface of a belt grinder moves at a It provides tower speeds that are othmise
much greater speed thawthat of a wheel. Although a unavailable.
thin belt dissipates heat faster than a solid wheel, the
effect is offset by the speed. One advantage of these The size and grit of the wheels are of my own
machines is that the ginding takes place on 2 flat choosing.
~.,,~;
:>!:;??; j ; : $ ! ~ : 2. $;j:,':+">3:%..&2
,3;';3;; <,:."'
..".
>..i. ';.$,+<.3
*<;;$:;:j!;,:,: g&g& .8y3,:i
.>;:..
,

3 : *, :g.g;~%:%%g
'3
;

,dvp*

"z.; ' , . +.< ?ZZ

. $?..
..m&$i@;g.;& =yg;:::>:::.;gkcg
$<z,.~ , ,:
-=>. .e

Overheatirg a canring tool on a dry grinder - If these p o w are remembered and the advice is
blueing rhe steel - is more likely with: always followed, using a drygrinder need never
be a-problem
faster motn speeds
Wet grinders elikinate the problem of heat
larger-diameter wheels generarion byevolving at a slow speed and
constantly flushing the blade with water. Even
her-grit ,wheels
with a lot of pressure you could never blue the
t h i i e r metal edge and, in this respect, they are excellent and
safe machines-
* smaller tools Dpdvanrages of wet grinders include the
increased pressure following
longer periads of contact. Water washing over the edge of the.tool
bakes the edge less easy to scrutiniee, so more
So, ro prevent overheating the metal:
of a sense of 'feel' 3.needed.
Bear the above principles and points in mind
The wheels tend to be softer and wear more
while working with the grinder.
quickly thati their dry counterparts.
Constantly monimz the temperature of the
The wheel should not be left standing unused
blade with your fingers on its back; never let
in the water trough for a long time, as asater
the metal get warmer than can be comfortably
soaks intcx the wheel and unbalances it.
handled.
Wet grinders are usualky.largermachines than
Always.keep a container with cold watex next
d ~ ones,
y and the cost must certainly be a
to the. grinder; dip the blades i n as often as
consideration.
necessary to .keep them cool.
 EQUIPMENT GRINDERS

The cost proved to be much less than that of The bear~ngs,spmndles and matching gnndmng wheels
buylng a new hgh-speed machme. can be bought new. It IS also possible to fit a useful
chuck at one end of the spmndIe. Always get the
About 400rpm produces a surface speed on a 6m best-quahty stone, at least l m (25mm) wde. A car
(150mm) wheel of about 3ft (lm) per second. fan belt (not your om!) lmnks the pulleys and is ten-
This speed, about one-seventh that of a smm~lar-xized s~onedby the weight of the motor, hlnged beneath
commercial grinder, reduces the generavon of heat the table on which the wheel assembly is mounted. It
drast~call~- in fact, by the same ratlo. The poss~hillty IS then a matter of fashron~ngand assemblrng the
of over-shapmng and overheating becomes much less, toolrests, belt guard, etc. to suit. The grmndlng wheels
although the wheel st111revolves at an efficiently use- should rotate towa~dsthe user.
The speed of the motor, which is specified on the
Maklng a low-speed grinder is a stra~ghtforward information plate, is reduced by the pulleys so that
project for anyone who has the pract~calsk~llsto be the wheel rotates at a slow surface speed. The basic
woodcarving already It mostly lnvolves the assembly formuIa for relatmng the speeds and the puIley dia-
of parts with a little improv~sation rather $an
- - meters is:
clever metalwork.
G x S= M X D where
The motor from a washmng machine, pump, etc.
can be picked up cheaply from a second-hand G = the speed of the grinding wheel (rpm)
tool shop or a scrap yard. Look for the lnfonnation
plate givlng the power ratlng and speed: you need S = the d~ameterof the spindle pulley
a motor of %-H hp (185-370W), single-phase and = the speed of the motor (rpm)
in good condition, w ~ t hmounhng lugs. Make sure
all the electrics are safe and appropriately earthed. D = the diameter of the drive pulley (on the motor).

Fig 10.5 The pam of a

s~mplehome-mode low-

Chucl< f o r
flexible shaft

- - - - - - - -

159

- - - -
 -
WOOOCARVIMG TOOLS. MATERIALS & ECUIPMENZ

The slow speed of a home-made wheel makes it The following points need to be emphasized:
much safer than a high-speed machine, but neverthe-
Keep wrring &om any machine aeatly out of the
less it is still fast enough for accidents to happen.
way, not trailing over the floor ar wmk surfaces.
When improvising, the onus of responsibility for
Do m t allow warer from the cooling jar to drip
safety rests on the improviser and an attitude of
aver the motor, elecmcal connections or plug.
thoughtful caution is needed. All moving parts which
do not need to be exposed - the fan belt and pulleys G u d , rests, e r c should be propetIy adjusted
especially - should be enclosed. The fastenings, and used. Face w eye protenion rs n&(rersary,asgiit
such as bolts, and the motor, spindle and grinding and sparks are @te capahk ofpen@rutiq the
wheels should be secure, and inspected at intervals. eyebaa. Face masks are! alsa advisable, aas the dust
With these precautions, and observing the normal pcoduced by stlicon-cmhide m alummm-ox~de
safety rules described in the next section, there is wheels or by gmund meral cannot be 'user-
no reason why such a low-speed grinder should not fnlendly'.
prove to be a great asset in shaping and sharpening Tie hack long hair and do not we;u loose
woodcarving tools.
clorhrag such as cufk and ties; serious tn~urycan
be caused if these are caught in a w h d ,
SAFETYAND CARE OF * Never smb at rhe wheel, wh~chcam lead to
GRINDERS
'diiging in'. Approach the surface posirively but
When you buy a grinder, whether wet or dry, read and ~ m t lworking
~, as much as posshle from the
observe the manufacturer's advice. This is usually well fixed toolrests. The side of the wheel can be used,
thought-out, and is as much for the user's benefit as but ueuery lighhtly; they should never be worn away.
the manufacturer's own protection.
The surface of the wha1 wtlI n e d dressing
Manufacturers often advise the 'running in' of new
oecastonally to keep ft flat and true. A dressing
stones. This means running them on the machine for
srane (sometimes called a devil stone) o t
several minutes before applying a tool; the idea is that
dressing wheel, is drawn carefully across the
any flaw or crack in the stone - enough to cause it to
spinning m e ro level it (Fis 10.6 and 10.7).
fly apart - is given a chance to reveal itself. Always
This ts a airnpl~but partrcularly dusty opwattan,
tap a wheel before mounting it: a dull sound may
jbr which& wst. of a+ mask and Eye pprotecdonis
indicate a hairline crack; although well tested in the
h p w ~ wA. strategically placed vacuum nozzle
factory, these stones are brittle and may get knocked
should also be considered.
in transit. Keep the wheel running true and use all
the surface uniformly.

Fig 10.7 The wheel har hammer-11keprolections that .

I on the surface of the gnndrn, wheel and break it down,
h g l U . 6 uressrng stone ( q t )and dressing wneel producrng a fine, kpiel surface
 CHAPTER ELEVEN

EQUIPMENT: OILSTONES
AND STROPS

When I began woodcarving in the mid-1970s I strongly advise that you work through the insmtc-
there were only two sorts of sharpening stone avad- t~onsm t h ~ chapter,
s even tf you mtend sharpening
able: artificial Carborundum and natural Arkansas. w ~ t ha different sort of stone - just pretend you have
Both are oilstones - they must be used with light mrne for the moment. Then turn to Chapter 13 to see
' OLI.When rh_ls book was first published, there was what varmtlons or addrtionat considerations there
still 11mle else to he had m the UK, or elsewhere. may be when other stones are used.
I
However, smce then there have been many changes,
with water, diamond and ceramic scones now
appearing strongly in the market - atones wh~ch BENCHSTONES
ate used with water rather than oil, or even with
nothing at all.
In this book I use my Carborundum and Arkansas There are two sources of benchscone: artificial and
oilstones as the parad~gmfor descr~blngthe sharpening natural. For the traditional method of sharpening you
process, and as a standard of comparison for the other will need both.
types of stone. The methods and approaches have not Generally the artificial stones are coarser than
changed, even if the type of stone has, and the com- the natural ones, and follow the grinding wheel m the
bination of Carborundum and Arkansas is one that sharpening process, refining the shape and stactmg
remains c o m m a with many woodcarvers and other the shaspenlng proper. The natural stones can cut
woodworkers; ~t 1s st111 my favounte. Alternave extremely finely, removing hardly any metal ar all,
stones are considered separately in Chapter 13, where and ir is these which put the keen cutnng edge to
they are compared and contrasted with what I am carvlng tools, after which the leather srrop Imparts
presenting here. the last degree of sharpness.
 W O O D C A R V I N G T O O L S . MATERIALS & E Q U I P M E N T -

ARTIFICIAL
STONES
TWES
Aaificlal stones are commonly referred to as
Carborundum stones. T h ~ sis actually a trade name
for vitrified silicon carbide that has entered general
circulation. There are three grades available coarse,
-

medium and fme - having different sues of cuttmg

crystals or grit. The speed at whlch they remove
metal irom the blade vanes: the coarser the gnt,the
greater the quantlty of metal removed and the faster
the cut.
It 1s common to leave out the m~ddlegrasle, pass-
ing s~raightfrom h e coarse stone to the fine one.
This 1s reflected in the fact that a combination stone Fig 11.2 Reflecaons fimn a glazed orkrone (left) mdxcate
1s avallable, w ~ t h
one mde coarse and rhe other fihe rhat the pores are clogged pulth stone and met$ pareicles
(Fig 11.1) Such a combination stone is the most eco-
nomtc optlon for the carver. Buy the largest surface glazes over (Fig 11.2) so the metal of the blade slides
size avallable, 8 x 21n (200 x 50mm), whlch is easy to without being cut. It follows that it 1s poss~bleto use
use and can sharpen a wide range of tools. too llttle oil, but not too much. Although experience
will tell you when a balance has been struck, do not
OILS be mean with the OIL
The Carborundum and Arkansas oilstones must be After a whde the all becomes a fine, black pulp.
used with oil. The 011 IS not being used as a lubricant; Regularly wipe off this sluny of 011, metal and grit
its purpose 1s to float away the abraded particles of with a cotton rag, and replace it w ~ t hfresh OLL
stone grit and metal. So really the ad is a rlmlng The best 011 is the readily avaltable, light lubn-
agent, a wash. Wlthout the wash of 011, the gaps or cating 011 used for bicycles, sewing machmes, etc
pores between the cutttng crystals fill and the stone Some oils, such as linseed oil, dry in contact wlth the
a x and would rap~dlyclog the stone; such oils, and
thick motor 011 (designed for a d~fferencpurpose),
should not be used.
At a pmch, water will do the job of washlng away
the ground-off grit and steel pulp from the pores of rhe
stone. It WIIIsoak in more qulckly than 011 and will
d~sappearmore easily; ~t also evaporates. However, it
is an exped~entthat w~lldo no harm when the can of
011suddenly runs out.
If the 011 is diluted wlth paraffin (kerosene), it pro-
duces a keener cut on rhe stone - as does rhe water.
Proprietary honing 0115 are premmm-quality light oils,
but in practice are of no apparent advantage over the
commercial light 011already ment~oned.
It 1s easy to get oily iingers from sharpening calvmg
tools, and equally easy to transfer the 011 to your
Fig 11-1 Combtnation stones aye u h ~ n a t of
e coarse and calving (Fig 11 3). Hang a kitchen toll and a cotton
fine Ca~borundumgnu rag near the benchstones. You may need rn wash your
 EQUIPMENT- OILSTONES A N D STROPS -

Fig 11.3 011 staim on a

bench wp, clean hnbits are
needed to avotd smns on
the workplece itself The oil
on the stone will slowly
soak through the wooden
box, which a a point m
favour of having a separate
sharpemng area

hands with soap and warm water, especially if you are black slurry after using the benchstone and never let
undertaking finishing cuts. it dry on the surface, as this clogs it.
Wash the stone periodically in paraffin oil
(kerosene), petrol or warm, dilute sodium bicarbon-
ate solution. Scrubbing with these liquids will loosen
.Sharpening stones are brittle and will crack or damage and clean a clogged stone.
easily if you drop them on a hard surface. Keep them A new stone soaks up oil like a sponge unless it has
i n boxes, bought or made, and cover them up when been previously impregnated with oil by the manu-
not using them ( ~ i g11.4). Grit or dirt in the oil, facturer. If it has not, you need to 'prime' the stone by
which interferes with the way the blade travels on the soaking it in light oil, diluted with a little paraffin, for
:stone surface, should always be removed. Wipe off the a few hours (or overnight) before use.
 WOODCARVING TOOLS N LATERIALS & EQ&lIPMENT

enough to anchor the board or box to the bench.

however rt is placed.

DRESSING WORN STONES.

It is not just metal that is removed durrng honing -
crystals of stone are abraded as well. After a while the
stone will no longer be fiat, and a concave shape
starts to rntetfere wlth sharpenmg. At this polnt the
surface of the stone needs dressing, or flattening.
once more.
You can delay this process by sharpening evenly
over the whole surface as much as possrble. Even so.
the stone normally erodes towards the centte, as the
parts nearer the edges are naturally treared w ~ t hcau-
Fig 11.5 A useful way of moUnhng a benchstone. The tion (F~gs11.7 and 11.8). If you are usmg separate
n~pped-offpmnsare shown overlength m realrty they need
only protv.de a small amount

If a box to fit the benchstone is not available, mount

the stone between wooden end blocks (Fig 11.5).
With the endpieces of wood made level with the
abrasive surface, the possibility of damaging
the edge of a tool by running it off the stone is elimi-
nated. Screwed from beneath, the glued-on end
pieces can be trimmed down as the stone wears and
gets re-dressed.
To stop the stone, in its box or mounting board,
from moving around when sharpening is underway,
tap panel pins into the corners underneath and nip Fig 11.7 Typically, the end of a stone will lnd
them off short (Fig 11.6). The pin stubs will project remain reasonably f7at . .

Fig 11.6 A close-up of one of the pinched-offpxns that .

Fig 11.8 . . but the centre WZUwear down. A@ a whk
$revent rhe box from moving dunng we rhz5 affem sharpen~ng,and the su&e then needs hellellmg
 EQUIPMENT. OLLSTONES A N D STROPS

Fig 11.9 A n extremely hard cast alloy block meant for dressing stones

coarse and fine stones rather than a combination

stone, these can be turned over to work on a second
flat face before having a 'levelling session' for both
sides. It is a good idea to dress all sharpening stones at
the same time, as the procedure is a bit messy,
although less time-consuming and more straightfor-
ward than is generally thought.
To level a benchstone you need:
another hard. flat surface, such as thick (date)
.L

glass, a stone or slate slab, or a metal sheet, such

as an old saw blade mounted on a piece of wood
(Figs 11.9 and 11.10).

an abrasive to cut back the stone, such as

Carbomndum grit (say 4OO), valve-grinding paste
or even fine sharp sand (using a fine grit gives a
smooth finished surface to the stone)

an oil (one part) and paraffin (four parts) mix

which will wash the particles around and
Fig 11.10 An old:sab Blade, ~ 6 t the h bide r - e d maintain the cutting action of the abrasive
and the w r h rendered flat and ~ $ 6 , is mowed on d board a straightedge such as a metal mler
(prgfwohly with a wlpe<cleansurfml. This,msther with
Bght oil imd m &as& grit, 15 a st@k of fitmirig newspaper and polythene to keep the table or
a benchstone bench clean.
 WOODCARVING TOOLS. MATERIALS & EQUIPMENT -

Method Keep checklng the surface of the stone wrrh

your straightedge - eventually no depression
0 Make a slurry of the abrasive and liquid on will appear in the m~ddle,whzch shows the
whatever flat surface you are using (Fig 11.1 1).
surface to be truly flat (Fig 11.14).
Q Set the face of the stone on to it and rub it
backwards and forwards and in a circular
8 Rlnse the stone m fresh oil and paraffin, and it
is ready for use again.
motlon (Fig 11.12). Be methodical, and lean
your weight on the stone a llttle.
ALTERNATIVE WAYS OF FLATTENING
After a while, wipe the stra~htedgeacross the STONES
surface, scraping off the sludge. You will see the
Instead of the saw blade and oil, wet-and-dry
exrent of the worn depress~onin the stone
abras~vepaper can be fured to a plate of glass
clearly (see Fig 11.13).
with spray-on adhes~ve or you can use one of
-

Q Contlnue rubbing the stone, revereng the gnp the verslons of this paper which are adhesive,
and, rf necessary, topplng up the abras~veor oil. backed already.

Fig 11.11 MLXsome oil and p ' t on the f i t suljace . . . Fig 11.12 . . . rub the stone firmly backwards and
forwards for a while . .

.-< .....-.
Fig 11.13 . and wpe wrrh a metal straghedge. The Fig 11.14 It does not take long before the su$ace of the
new flat surjace wrll be seen encroaching on the holJ.ow, stone 1s truly flat
sludge-filkd ceirhp
 ONES AND STKOPS

Diamond benchstones or lapping plates can be Washita is the softest grade, with a cut approximately
used to flatten other sharpening stones, as well as equivalent to that of a fine Carborundum stone. In
for sharpening carving tools themselves. fact, Washita has little advantage over the cheaper
The belt grinder is a very quick method, but not artificial stone. The Washita is really a medium grade
without its hazards. In particular, a lot of dust of Arkansas, and has a mottled appearance (Fig
will be flung into the air; this dust is bound to be 11.15). It makes useful slipstones, but its softness
harmful, as the crystals of stone will be sharp and makes the stone less capable of holding a thin-edged
will contain silicon and other toxic chemicals. shape or a fine angle.
You must do this outside and away from everyone The next variety, harder than the Washita, is the
else, fully protecting your lungs with an adequate white Arkansas that sometimes appears translucent,
dust mask or filter, and your eyes with a face especially when wet (Figs 11.16 and 11.17). Three
shield or goggles. In addition you must take care grades of the white Arkansas can be distinguished:
to keep a grip on the stone which, being brittle, soft white, hard white and translucent. Unequivocally,
will break if it strikes the ground. ~t is the translucent Arkansas that gives the perfect

TYPES
Before the days of industrially made whetstones, nat-
ural stones were all that was available. These stones
have some evocative names: Charnley Forest,
Shammy, Dalmore and Turkey stone. Originally they
were quarried from specific rock seams, which perhaps
no longer exist; today they can sometimes be found in
second-hand tool shops. The hardness and cutting
quality vary between different types of stone, and
even within one type, depending on where in the
seam of rock it was taken from. L LS ~1.15 (LCLL to I I ~ I I L / Washita, hard whirr rirkansas,
Two natural stones still readily obtainable are the translucent Arkansas
Arkansas and the Washita. They are available as
benchstones and slipstones (see below), are fairly
consistent in quality and are much more expensive
than manufactured stones. However, they are essen-
tial for honing the keen edges needed by the carver.
Arkansas and Waskta stones are types of what is
geologically known as novaculite. Today, most of this
material is cluarried from limited seams in Arkansas,
USA by the Smith family business. They have quar-
ried the stone and prepared it for commercial use
since 1885 - although before then it was used by the
native Americans to make spear and arrow heads.
Novaculite as a name derives from the Latin nouacula,
'a razor', in recognition of the cutting qualities of
these fine-grained stones. Novaculite is graded Fig 11.16 The white Arkansas benchstone appears white
accord~ngto its hardness: the softer the stone, the when new, gornggrey wzth otling The one wlth white
coarser its cut. and vice versa. mottltng on p y has been newly dressed
 -
- W O O D C A R V I N G TOOLS. MATERIALS 61 E Q U I P M E N T

polishing the blade, which carvers more usuall!~

undertake by stropping.
So the translucent stone is the most useful to the
carver. The hard white needs heavy stropping - as do
the ceramic and diamond stones considered in
Chapter 13 - to get the required edge; and the black
is too fine. Buy a translucent stone in the largest
surface size possible.
The cost of a natural translucent benchstone may
seem exorbitant to the newcomer to carving, but
the expense is relative. A good-quality stone is an
investment - they will never get cheaper - a pleasure
Fig 11.17 A demonstration of ..,,,:ucency in a f ne g., to use, and it does its job efficiently and well. Think
o f white Arkansas about how many meals or golf balls you could buy
for the same amount. Perhaps, too, there is also a
cutting edge to carving tools. It follows o n fro& the little magic in the knowledge that these stones have
coarse (or tine) Carbomndum in the sharpening been wrested directly from the earth, each one unique
process, and it is the only one that I recommend and irreplaceable.
students to buy. The quality of Arkansas stone has, in
my opinion, deteriorated over the last few years, OILS, CARE AND DRESSING
apparently as the best seams are being quarried out; so T h e same advice applies to natural stones as to the
the cost of the best-quality stones has risen and the artificial ones: keep them in a box (Fig 11.19) or
size (thickness) that you get for your money has mounted. As they will both clog and break more
decreased. Nevertheless, the translucent Arkansas is easily, perhaps a little more care is needed.
the only one for woodcarvers.
The hardest grade of novaculite is the black
Arkansas - always the most expensive stone and,
luckily, not much use to the average woodcarver (Fig
11.18). These stones cut so finely that it amounts to

Fig 11.19 The boxes supphed wlth standard-size stones

are often s~gnlfcantlybzgger than the stones Some sl~psof
Fig 11.18 Thr black Arkansas stone, whzch n ueiery black wood packed around the edge of the stone wzll keep it
m appearance, zs too hard for general purposes s m t ~ m r ym the box
1 EQUIPMENT OILSTONES A N D STROPS

SLIPSTONES loose from ('let slip'). These stones do not 11e

passively on the bench but are actively applied by
the fingers.
TYPES Slips are available in both artificial and natural
stone, and in a large number of shapes and sizes
Slipstones (or slips) are the small, specifically (Fig 11.20). You will need both large and small
shaped stones that work the insides of gouges and Carborundum stones for heavy sharpening or reshap-
V-tools. The word slip describes these stones well. ing (Figs 11.21 and 11.22), and the finer natural
Coming from Middle Low German, it retains the stones for the final honing (Fig 11.23). The small
original connotations of being small and strip-like cylindrical, triangular or square ones shown in Fig
('a slip of paper'), sliding ('slip up'), and lett~ng 11.22 are sometimes known as stone files.

Fig 11.20 Some sllpstone

shapes and profiles

Fig 11.21 Larger Carborundum slip . s e h l for ig 11.22 Small Carborundum slipstones: (left to right)
larger sculpture tools: [left to right) s r a k r d wedge shape; large and small triangular; rectangular with bevelled edge;
'kidney' or half-conical; standard; conical large and smull cylindrical
 W O O D C A R V I N G T O O L S . MATERIALS & E Q U I P M E N T --

A slip that is smaller and of quicker sweep than a par-

ticular gouge can still be used, but one that is flatter
tends t o dig its comers into the metal (Fig 11.25).
Where possible match the exact shape to the sweep
of the blade, but, with dextrous use, a few slip-
stones can be made to go a long way. A small set of
Arkansas slipstones is available (Fig 11.26); this,
together with a larger round-edge slip, will cover most
of what is needed.

The best option: the curve

of this slipstone fits the

Fig 11.23 Translucent Arkansas slipstones, a b o u t ZXin .-- sweep of the blade exactly

(65mm) long

It is the edges of slipstones which are used for shaping:

rounded edges (flatter or quicker) shape the inner This shape of slipstone
sweeps of gouges, whereas angled edges suit the V-tool would be acceptable,
and other angled tools. Conical shapes are also very \ ,! worked from side t o side
\ and diaqonally
useful. I t is not necessary to have large numbers of
slipstones - as with carving tools themselves, it is best
to start with an essential few and build up numbers as
they are needed, or as they become available.
A slip is worked up and down the inside of a gouge
This slipstone is
and if necessary from side to side, creating an inside unacceptably fiat for the
bevel - a process known as 'opening the mouth' (Fig sweep of the blade
11.24) - or they may simply be used to clean away
any burr left from sharpening the outside bevel.
- -

Fig 11.25 The shape of the slipstone needs to be carefully

matched to the cross section of the b&

Fig 11.24 Small slipstones can be used very delicarely for Fig 11.26 4 very useful set of four small Arkansas slips
specific and exact sharpening with different profiles and (above) a triangular slipstone
 - EQUIPMENT: OILSTONES A N D STROPS

and separate from the rest of the mess on the

workbench; better still if some means can be found
to prevent them knocking against one another (Fig
11.28). Slips need preparing before use, keeping
clean of grit and, in the same way as benchstones,
occasionally reshaping.

STROPS
Fig 11.27 The edge of th~sArkansas slrpstone has be,
given aflatter curvature at one end than the other, making rt Strop is an older form of the word strap, meaning
far more versatile than before 'a strip of leather'. The strop is used, impregnated
with a fine abrasive, to give a final, finishing sharpness
to the microscopic cutting edge of a carving tool
while simultaneously polishing the bevel. ('Snappy'
This is easily done and often necessary: the number of people often exhibit an abrasive quality.)
available stones is far less than the range of cannels Strops take the form of benchstrops, for use on the
they need to fit. You can alter the shape of a slipstone outside bevel, and slipstrops, for working the inside.
to suit a particular use with the grinding wheel, They are a very important part of the carver's kit, and
benchstones or even a file and sandpaper. W ~ t hthe both types are used regularly to brighten up a dulling
larger slipstones, one half can be given a rounder pro- edge and maintain its sharpness. Most commercially
file and the other a flatter one - saving on the cost of made benchstrops are too small. It is not difficult to
two (Fig 11.27). Leave the surface of the slip, after make a good one (Fig 11.29).
shaping it, as finely finished as the sides, using, for
example, fine sandpaper.

CARE LEATHER
Strops are best made from the tight-grained, harder
Slipstones, like benchstones, are brittle and easily type of leather used for saddles, harnesses, belts
damaged. They are best kept covered in a box

Fig 11.28 Small slipstones are quite brittle and easily

chipped or broken. A rack like this will stop them damaging
one another
Fig 11.29 A benchstro~ ; cove?
1
back and
ready for use. Also showm are some dressing compounds: a
proprktary stropping paste (left), a home-made mixture of
tallow and fine abrasive, and a block of c~ocusabrasive
 W O O D C A R V I N G T O O L S . MATERIALS & E Q U I P M E N T

and briefcases. This is mostly vegetable-tanned crocus powder

cowhide. If too soft a leather is used, the surface curls
Carborundum powder (at least 400 grit)
up as the tool passes, rounding the cutting edge (more
will be said about this effect later: see page 208). The finest emery powder
firmer the leather, the better. Leather may also stretch
or ruck if it is too thin, so a minimum thickness of %in finest valve-grinding paste
(3mm) is needed. A local saddler or hand leather- jewellers' rouge
worker will normally have suitable offcuts.
A good size for a strop is 10-12in (250-300mm) tripoli wax
long by 3 4 i n (75-100mm) wide. The leather surface
diamantine (aluminium oxide)
should be untreated so that the pores are still avail-
able to take the abrasive. Use a wire brush to cut back proprietary metal polishes such as Brasso
finishes that have been applied to the leather. The
proprietary strop paste.
leather can also be used with the grain side (the outer
or hair side) down.
These can be obtained from any of the major mail-
order tool suppliers.
M O U N T I N G THE STROP
The abrasive is held to the leather with tallow
Mount the leather on a block of wood which is a
(preferably), Vaseline, lard or light oil - being very
little oversize, fixing it at the top end only. Do not
fine, these powders tend to get everywhere. Some of
glue it down, as a free lower edge can be bent to form
these abrasives are available in blocks, already made
a slipstrop. A cover of thinner leather or canvas-like
up with wax or tallow.
material will keep the strop dust- and grit-free when
Do remember to wipe tools after stropping to
not in use. Nipped-off panel pins in the underside of
prevent these greasy compounds from transferring to
the mounting board, as with the benchstones, will
the wood.
hold the strop on the bench (Fig 11.30).

DRESSING THE STROP

ABRASlVES
T h e strop can be dressed with almost any vely @ Sprinkle some of the abrasive powder o n to the
fine abrasive. Some alternatives which are suitable leather, leaving a Xin (13mm) margin around
include: the edges.

Flexible leather or canvas-like

I
Strop - - -- -
- -,
--. --
leather 3I - -
I I
/
I
Nipped-off tacks 01

11.30 The benchstrop

 E Q U I P M E N T : O I L S T O N E S A N D STROPS

@ Use a finger to rub some tallow into the powder. technique is descr~bedin greater deta~lm the next
chapter (pages 189-92). It is easy to nick the
Q Repeat a few tlrnes by sprinkling a n a little
strop with a casual forward stmke. Gashes or nicks
more of the powder and workmg In more tallow
can usually be filled with dressmg or smoothed by
to get a uniform colour and consistency. If the
stropping over the area. Over a penod of time, the
abrasive comes as a paste or block, work tt
dresslng wdl start to work its way to the near end of
strarght mto the leather.
the strop; reversing the onentatlon of the strop now
@ Place the strop In a warm oven or under a grill and then, to strop in the opposite dlrectlon, will
for just long enough to melt the tallow, which inhibit thrs effect.
then soaks further Into the leather, binding the If you are moving to the strop from the bench-
abras~veto the surface berter. stones, do not wipe the 011 from the blade bur allow it
to work lnto the strop; lt will keep the leather supple
@ When cool, beat the strop w ~ r ha large chlsel or
and fresh.
something similar, dragging the strokes towards
you. This works the dressing in and removes
surplus; keep any surplus for re-dressing. ,
SLIPSTROPS
For a whlle, excess dressing may come off the strop
and on to the gouges; these wtll need wiping before
Sl~pstropswork the inner bevel of a gouge or V-tool,
use. Although the strop will settle down qulckly,
and resemble the shapes of slipstones. There are
blades still need w~pingafter usrng it and before
several ways of making them:
carving. Leave a rag by the strop, and always wipe
away from the cuttlng edge. Simply fold over another, smaller prece of the
benchstrop leather and dress the fold as described
above A piece 6 x 41n (150 x 100mm), folded
on the longer edge, pmduces a slze big enough to
Cover the strop when not m use, keeplng it free from keep the fingers clear of the tool's cuttlng edge
grit and dlrt. (Fig 11.31). Push the folded part into the cannel,
A strop is always used by dragging the cutnng where it flexes to fit the lnslde bevel. This type of
edge tovn*J. you so as not ry-*
+he soft leather. The slipstrop ts particularly good for the larger gouges.

Fig 11.31 For hrger tools

I
a piece of folded and
dressed leather is the
simplest slipstrop Be sure
to make it of an adequate
size to keeb the leather
flexible where the abrasive
covers it, and to keep your
fingers clear of the blade
 W O O D C A W I N G TOOLS MATERIALS & EQUIPMENT -

Fig 11.32 Slipstrops

made from thin leather on a
wooden core
Block allows olentv of /'77

Glue thin leather to appropriately shaped pieces Such slipstraps are good for medium-sed gougzs
of softwood and dress the part which fits the and V-tools.
carving tool (Figs 11.32 and 11.33). Profile the
wood with the gouge (or V-tool) that will be Use hardwtmd ina similar way, but without the
stropped; create the shape by inverting the tool leather, and dressing the abrasive straight on to
and cutting along (that is, with) the grain. Be the wood.
sure to leaye enough wood for a safe grip with
the fingers, well clear of the passing tool edge.
* Fot the smallest tools, a leather pad comtfucred
like rhe b e n c h o p works well. Deeply scored
lines of varying widths take the corners of a
gouge as its edge is pulled a i g the leather
(Fig 11.34rc). Score the lines with a kn~fe,ue+ng
tightly scared lines from the come~sof the tool
itself as a guide. A leather thmg IS an altematlve.

Small strips of wood, without leather but

drmsed with abrasive, can be sm& onto a b a r d
at inro a ~~~~~ box (Fie; 11.34b). Cut rhe
aecessq pmfiles with the appmpriate tools.

The lower BdgL: of the main ben&vpp - or a

large, folded shpvop - can be d m e d with
abraslve for usz on the insides ofsmall gouges.
You canalso pant the edge to a bevel to fir
uls~dea small V-taal. (Yuu might l&e ro h o w
Fig 11.33 A slip of wood shaped specifically and covered that the techteal tern fat p a w leather
with thin leather makes an excellent slipstrop is skihg.)
I EQUIPMENT. OILSTONES A N D STROPS

I
Fig 11-34 Two methods
bf muking slipsnops for
Small tools

As with slipstones, a few shapes can be made to go a

long way.
Care of slipstrops is similar to that of benchstrops
Keep them with the main strop on the bench, free . ,; l
i

Here is a list of the 6ask equipment neeaed

from dirt or grit; a simple rack will keep them in order
by the woodcarver to sharpen and look after
YFig 11.35). Move the leather away from the cutting ,. . ~., , ? -

carving tools:
edge and re-dress notches if they occur. Again, a little . . -<

oil will keep suppleness in eather. bench grinder (optional)

coarse Carborundum benchstone

I,
i
I
r
1'.
1 fine Carborundum benchstone
white or (preferably) translucent Arkansas
benchstone

I slipstones: large round-edge slips, and

I li composition ' % -

I :

t
, I

abrasive dressing for the strops.

I 1.35 An assortme ops kept rendy for use in :. , - .:
. .:

a purpose-made rack

- 175
 C H A P T E R TWELVE

THE PROCESS OF
SHARPENING

To descr~hein detbil the whole process of

sharpenmg, from initial grind~ngto final stropping

To draw attention to the specific problems posed by

particular tools

To advise how to keep tools sharp

To conslder the layout of the sharpening area of

the workshop

..-,.
SHAPING AND The overail contours ana proi?ie &;he blade are
formed, using the grinding wheel and the coarse
SHARPENING benchstone and slipstones.
Edges are squared off and the comers made true.
Here is an overview of what happens when you
Inside and outside bevels are set.
sharpen a carving tool. I am going to use the oilstones
(Carborundum and Arkansas) as my model for Adjustments are made to get the line of light
benchstone sharpening. If you are using waterstones, neat and even; at this stage it should be about the
ceramic stones or the like, you will need to allow thickness of a line drawn with a ball-point pen.
for differences in grit: if they are coarser or much
finer than the Arkansas stones, more stropping (by. After preparatory shaping comes the actual sharpen-
hand or power) may be needed. These other types ing. Slipstones for the inner bevel, and benchstones
of stone are considered in the next chapter; use for the outer one, gradually thin the visible edge,
the advice given there in addition to what is while maintaining a flat bevel, a straight edge and so
discussed .here. (Power stropping is covered in on. The white line attenuates to a hair's thickness,
Chaprer 14.) then disappears altogether. If the honing has been
It is helpful to conceive of a preliminary stage of true and even, the whole of the line disappears at the:
shaping a carving tool, before the sharpening proper. same time. If not, a little more honing in specific
At this shaping stage: places will remove any white specks or areas.

176 I
 T H E PROCESS O F S H A R P E N I N G

If you end up with a poorly shaped edge - through Curved profiles

over-enthusiasm or inattennon it must be levelled
-
straight gouges
off square again. Present the tool dead upright to the
Arkansas stone and gently draw it over the sucface a fishtall and other tapered gouges
few times. The amount of wh~teline showing and the
longbent gouges
state of the bevel then dictate the next stage: what
coarseness of benchstone or slipstone is needed ro
resume sharpenmg.
. shortbent gouges
backbent gouges
When the white line has disappeared, r t might be
thought that- the tool 1s sharp. However, pushing the
Combinations
cutting edge into a piece of scrap wood may cause
the l ~ n eof light to reappear in whole or in part. This deep gouges (nos. 10 and 11).
1s because a wire edge (or burr) - a feather-edge of
'metal- occurs where the sharpenmg of the inner and Different approaches, but all us~ngthe basic proce-
outer bevels meet, and hides the whlte lme. Pushing dures outlined above, wlll allow you to master all
the cuttmng edge Into the scrap wood removestthe these different profiles.
wireedge at the same time as toughening up the metal The following sechons deal with how to use
and revealmg the white line. A few more strokes of the varlous pieces of equipment to work these pro-
careful honing wlll ehmmate the white hne. Once files correctly; the specific needs of ~ndivldualtools
more the edge is pushed into the wood, and touched then follow.
up on the fine stones again d the lrne returns.
When the white light does not reappear, try cut-
ting across the grain of another piece of wood, such as
a good-quahty softwood The cut surface should be
BASIC PROCEDURES
polished and w~thoutscrarch marks. If scratches
occur, a slipstone can be applied to the correspondmg Carvers differ in the way they use gr~ndmgwheels,
tell-tale spot of hght, w ~ t ha final touch-up on the benchstones and M, on; rhey differ also m what final
benchstone. Try the cut again. When a clean, sharp shapes and bevel angles they want. Beginners, too, will
cut has been satisfactor~lymade, the bevel and edge eventually develop their own preferences The methods
can be shcked up on the strop. g~venhere work successfully and are cons~stenrwith
all that has prev~ouslybeen sald regarding cutting
profiles and angles.
CUTTING PROFILES
Although there seems to be a Large variety of shapes Grlnding wheels shape the carving tools initially,
for woodcarving tools, there are in fact only two gen- settlng the bevel and edge. They may also be used to
era1 profiles across the cuttlng edge flat and curved
- repair broken or damaged edges.
- wlth a few comhmat~ons.Carving rook divlde Into * The grindingwheelshould always a m towards the
these profiles in the following ways: operator. This is a debatable point: IC is sometimes
recommended &at the wheel should turn away
Flat profiles from the operator. The reasons for recommending a
direction of rotation towards the operator therefore
firmer ch~sels
need to be considered m some detail, since different
skew chisels directions of the wheel have differing effects on the
V-tools and macaroni tools tool edge.
-
T H E PROCESS OF S H A R P E N I N G

Perpendicular to the cutting surface of the Square-on to the rotation

wheel
Offermg the gouge square-on (at r~ghtangles) to the
Tools are presented m thls way (Fig 12.3) as part of wheel (Fg- 12.5), and rotatlng- it from comer to cor-
the preliminary shaplng stralghtenlng or flattening
- ner whlle keeping the same angle of presentation, will
the cutting edge from comer to comer. Be gentle produce a flat bevel. Thrs operatron rnvolves holdrng.
and precise. Use the whole surface of the wheel the tool m your hands and steadying your hands m
where possible, and use the toolrests. Always wear turn on the grinder's toolrest. It is not a difficult tech-
eye protection. nlque and, d a firm but gentle approach is taken, it IS
quite safe.

Fig 12.3 Perpedcular presentanon [for clanty the

grrnder's perspex guards are swung up)

In line with the rotation of the wheel

T h ~ ts
s the usual method for settlng the angle of the
bevel. When a tool is offered ~nline with the gnnd-
mg wheel (Fig 12.4), the bevel tends to ptck up the
Touched to the side of the wheel
circular shape of the wheel, producing the hollow
grmd mentioned earlier. The smaller the wheel, the The quickest method of gnnd~ngflat bevels on a
more hollow the bevel This hollowness can be gouge or chisel is to start w ~ t hthe normal (in-lme)
removed on the benchstone. presentatlon to the wheel and remove most of the
unwanted metal from the bevel. Then make a final
few passes wlth the tool presented square-on, removrng
any hollowness. You must rotate a gouge across the
whole of its bevel surface, whatever the orientation to
the wheel. Alm to grlnd smoothly, with any rotatlng
commg from your wrlst at the handle; try to produce
a clean bevel m t h no facets.
For a chisel or V-tool, flatten the bevel by touch-

-
ing it carefully and gently to the s~deof the wheel,
using the grinder's toolrest (Fig 12.6). Use only the
l~ghtesttouch, as these wheels are not really deslgned
-
to take sldeways pressure. Look at the scratch marks
on the bevel and let them guide your pos~tloningof
Fig 12.4 In-line presentanon, with fingers on toolrest the tool.
 W O O D C A R V I N G TOOLS. MATERIALS & E Q U I P M E N T

Q For gouges, set the outside bevel by gr~ndlngm

l ~ n ew ~ t hthe wheel, rockmg the gouge from
comer to comer (Fig 12 7) and maklng a

Fig ~ 4 . oTouching rhe cmwmg tool n, rhe slde of the

g r i d n g wheel; only the Irghtest touch IS permzssibk

Even though a grulder removes metal qu~ckly,impa-

tience may still lead to two unwanted consequences:

Overheating
With a fast, dry wheel, check the temperature of the
blade frequently and never allow it to rise above
hand-warm. T h ~ means
s adoptlng a rhythm of short
L
bursts of light gmdmng, dipping the blade m cold
water between times. I
Over-grinding
The same regular approach wlll help prevent over-
grmnding - a p~tfallto be aware of from the beginnmg.
I
Try not to take roo much metal off at anme, but work
evenly. Take the white line of light at the edge con-
t~nuouslyas your guide. Keep looklng at its thickness
and the scratch marks on the bevel to be sure of
exactly where you are removlng metal, and how
much. Bear m mlnd the shape you are a r m g at. If
the edge loses its shape, you may need to level it off
by presenting the tool perpendicularly and starting
the process again.

METHOD
O Start by setting the cutting edge, from comer to
comer, at right angles to the longlmdinal axis, Fig 12.7 After the edge hds been straghtened, set the begel
as shown already m Fig 12.3. Smooth and clean of rhe gouge o n the p d m g wheel by smoothly r o m n g a at
up thls srra~ghtedge right at the start on the the correct angk from comer to comer. Keep checlang the
Arkansas stone. result. (For clan3 rhe grinder's perspexgwrds are swung up)
 T H E P R O C E S S OF S H A R P E N I N G

uniform line of light with the heel and edge quickly, although coarse slipstones are more
parallel. Finish at right angles to the wheel, often used. The white line will thin down -
flattening the bevel (Fig 12.8). keep it even and uniform.

@ For large gouges, small grinding wheels m dnlls O For flat chisels, the grinder's toolrests can be
or flexlhle shafts can create an tnner bevel used to help set the bevel equally on both stdes
Move the tool from slde to side, coverlng the
whole stone evenly. If you do not want to use

1
the side of the grlndlng wheel (or even to grlnd
square-on) to flatten the bevel, use the coarse
. benchstone

@ The tool should now be ready for the

benchstones.

STONING (HONING)
Some beginners are unsure at what angle to present
their chisel or gouge to the benchstone in order to get
the right cutting angle. I'll give you here, right at the
beginning, the key: you should simply present
the tool to the benchstone at the angk at which you
want to hold it while you are carving wood - that is, the
cutting angle.
Imagine the surface of the benchstone to be wood;
pretend to carve it with your gouge. You will see you
are at the 15-20", which is the 'natural', most con-
trolled angle at which to carve. Keep this angle as
you sharpen.
The two basic carving-tool profiles - curved and
flat - are presented differently to the benchstones for
Fig 12.8 Flatten the bevel by oferlng n square-on to the
sharpening:
rotation Do this lightly and make sure your hand u
supported by the toolrest. If preferred, ths method can be Flat chisels are presented in line (end-on) with
wed for all the bevel shaptng the stone (Fig 12.9).

Fig 12.9 Working along

the benchstcne with a
chisel; the stone is
orientated on the bench
end-on to the user
 W O O D C A R V I N G TOOLS. MATERIALS 6.EQUIPMENT

Gouges are presented at right angles (square-on)

to the stone (Fig 12.10).
12.11 Ckaning the edge of a carving tool inwolves
Became of this differing orientation, mount the offering it in a peqendicular position and pulling it along a
benchstones so that they can be tumed around; do f i t benchstone. This is necessary each time you move to a-
not fix them permanently in position on the bench finer stone, refininEthe edge fiom the coarser grit of the
with cleats. previous one
The following procedures to get a straigl~tedge
from comer to comer of your tools apply to all this too often, as it is wasteful of material. Perhaps
types of benchstone; remember that oilstones must only one pass on the Arkansas stone may be needed
be oiled first. to produce a clean edge from which to resharpen.
All other ways of holding the tool for sharpening
STRAIGHTENING THE EDGE involve the correct use of the whole body. This is
For both chisels and gouges, start by holding the important to achieve the right effect. Carving tools
blade perpendicular - like a pencil - to the coarse are sharpened from the hips and legs, not the elbows.
stone and dragging it across the surface a few times
(Fig 12.11). This is a more exact alternative to H O N I N G THE BEVEL: CHISELS
straightening the edge on the grinding wheel. In both
Q Position the stone on the bench so that its end
cases, finish off the straight edge on the Arkansas
points away from you (1.e. end-on).
stone; this produces a strong, smooth, clean edge with
which to start; it also makes the line of light easier Q If you are right-handed, hold the chisel handle
to see. in the right hand with the first two fingers
Whenever a cutting edge has become unaccept- of the left hand on the back of the blade, a
ably wavy - or the corners lost - you can reinstate a little behind the bevel - vlce versa for the
fresh white line using this procedure. Try not to do left-handed.
 T H E FROCESS OF S H A R P E N I N G

Q Place the heel of the chlsel on the near end of fractionailv, learn to feel when the bevel l~es
the stone. Try to get a sense of the heel resung truly flat on the surface.
on the surface (Flg 12.12). Keep your elbows by
@ Remember to present the ch~selor gouge to
your sldes.
the benchstone at the cuttlng angle the angle
-

@ Ra~sethe handle untll the bevel lles flat on the at wh~chyou want to hold the tool whlle you
stone, and then a llttle more to br~ngm the are carvmng. Move the chlsel forwards and
actual edge. By taislng and lowering the handle backwards along the benchstone, maintalnlng
this angle consistently and keeplng the bevel
flat. To do &IS, keep your elbows by your s~des
and rock your whole body backwards and
Feel the heel forwards from relaxed knees. You will need one

L
foot a little in front of the other. If you keep
your bady st111and just push the blade
backwards and forwards with your arms, there is
a smng tendency to raise and lower the handle,
rounding the bevel; this is caIled 'rollmg rhe
Lower the bevel to
rest flat on the stone edge' (Fig 12.13). Keepmg the bevel flat
requlres this whole-body app~oach.
6 Use the whole of the stone's surface, but keep
clear of the very edge. Be careful not to pull the
chisel off the stone on the back stroke, as t h ~ s
inevitably damages the edge.
@ After a little whlle, turn the chlsel on to the
Fig 12.12 How to get a senre of the begel restingflnt on oppos~teside and repeat the action. Countlng
the surface of the benchstone the number of strokes on each slde can help you

A ig 12.13 Lowering and raising the handle rolls (or rounds) the bevel

183
 -

W O O D C A R V f N G TOOLS. MATERIALS & E Q J I P M E N T

Fig 12.14 Use the

appearance of the bevel tClt

surjace to monitor the

fitness of the bewel

I A few sideways
I
- strokes will
superimpose
another set of
scratch marks to
check bevel
flatness

I Normal honing of
the chisel produces
one set of scratch '
marks

Sign of a rolled or Sign of a flat bevel

rounded bevel

keep rhe two bevels equal. Mainttdn a patient, rounded, a new micfk will appear as a line acrm
steady rhythm. Watch fhe amounr of 011 on the the middle. If the beyel is flat, the new mark
stone, a$ the edge rends to push ir off. will extend Erom edgP to heel [Fig 1214).
@ Always h k at jhe urhite l ~ n ofe lighr, keeping @ Working thnaugh the,stones m t h ~VZY,
s and
Iruniform w ~ t htienslrive adjustments tb the o k v & Fa* white line,and the k c 1
point of contact between stone and metal. Do scrstcbes, you ca$ a m a i n ;ai even,&at
nor be tempted to raise the handle ro make dze reduetton of rhe merat m k f i edge which hall7
lme of ltght disappear more quickly, If the line dmppears.
i s &eka on one side, try net so much tet tilt
the cml as ta.~nwtginepurringmore pressure on
HONING THE BEVELGOUGES
thp~ side of the blade. You may find that you
have a built-in bias to one sideor tho arbet, and O Positi~nrhe benchatone so thar rcs side is fa&g
have ro wid against thi~. you (i.e. side-an),
@ Occi3asionally, still keeping the beveI flat, make a @ T&nxg a medimdsweep Ems6) gauge as an
short sideway4 stroke amos the stone rarhef example: d you are rigkc;hap1ded1hdd the
c h i along it. Exammne rhe sacitch &s on handle in h e cight hand with the first two
the surface of Fae bevel. Zf&e bevel has hen fingers ofthe I& hand in the camel at mouth

184

-
 THE P R O C E S S O F S H A R P E N I N G --

of the blade, about a finger-joint back from the more towards the centre. This constitutes one
edge. Vice versa for the left-handed. sharpening stroke.
Q Place the heel of the outslde bevel In the centre 8 Without lifting the gouge from the surface,
of the stone. Keep your elbows by your sldes. reverse the movement so the gouge comes to
rest on its nght comer, over on the left of the
8 Start by gettlng a feel for how the flat bevel stone once more (Fig 12.15). This completes a
rests on the surface of the stone. Ralse ehe cycle of two strokes. Notlce that the direction
handle until the bevel lies flat on the stone, of rotatlon goes agaznst the direct~onof travel,
and then rase it a little more on to the actual efficiently bltlng the metal mto the stone.
edge. By ralslng and lowering the handle a
litde, leam to feel when the bevel 1s lymg truly @ The gouge is rocked like thrs, from one end of
flat on the surface. With a little practice you the benchstone to the other and back agam, m
will be able to go stralght to restlng the bevel regular, even strokes. Use the whole cutting
flat on the stone. surface, but avoid both a figure-of+eightpattern
- whlch rounds over the bevel - and the very
@ Remember to present the gouge to the , edge of the stone.
benchstone at the cuttlng angle the angle at
-
@ Present the bevel flat all the time. To
wh~chyou want to hold the tool while you are
accomplish this, keep the elbows in, rotating
carving Start on the left of the ollstone wlth
the tool handle from the wrist and forearm.
the gouge turned on to its rlght comer. The
Shift the weight of the body from one leg to the
mouth of the gouge will be polnting towards the
other, keeping your back upright and your knees
centre of the stone.
relaxed and slightly bent. This posture has
@ The gouge must now move to the opposlte end something of the judo stance and balance about
of the benchstone. In doing so, you must also it, and should feel comfortable and unforced. If
rotate the blade so that it comes to rest on its you work from the elbows only, the bevel will
ir~xarI~~b1x
b~$s2FQee g.rrsuoded.

A . 12.15
g The d~rectronand rotanon of a gouge while bezng sharpened on a benchstone
 WOODCARVING TOOLS. MATERIALS & EQUIPMENT

u
Fig 11.16 Sl~pstonesare used in a parmerslup wrth bencktones, mbbzng backwards and forwards while mintainzng the sa..-
angle to the biade. The upper hand w e : , not the lower

Thls 1s the basic technique for gouges, to wh~chsome

extra pornts need to be added:
Use the sllpszones with the benchstones to was
the Inner bevel or remove the wrre edge (see
pages 187-9). In the s h a r p e m process, the
han~ngof the edge alternates between
benchstones and slips (Flg 12.16). Sllpstones are
aften used first, where an Inner bevel 1s requlrec
Regularly check the state of the white line.
If it becomes thicker in one pan compared wi&
another, llmit the ratation of he blade for a
few strokes and work more specifically on the
thlckes part. Conversely, if some part of the
white line becomes unduly thmnner, avoid honing
that part of the edge. This may mean you have
to divide your honing Into two separate strokes - Fig 12.1 7 Romkng the gouge too fm wrlI hone away the
llfting the gouge to avoid the thln part in the all-important comers
 - - -
T H E PROCESS OF S H A R P E N I N G

m~ddle u n t ~ the
- l wh~teline 1s returned to a
uniform thickness.
SLIPSTONING
To sharpen the whole bevel, the corners must be As a general rule, use the same type of stone on one
included, but rt rs very easy to over-rotate the s~deof the edge as on the other. So, when worklng the
handle and sharpen them away ( F I ~ 12.17). Extra outs~debevel on the coarse Carbomndum bench-
care must be taken w ~ t hthe comers at the end of stone, use a coarse Carborundum sl~pstoneon the
the stroke, so that the gouge 1s rotated ne~ther ~ n s ~ d-e matchrng grade to grade as the abrasive
too much nor too httle. Adda~onally,all the stones get finer
finger pressure on the gouge tends to lie on the Match the curves and angles of the slipstones to
comers at the polnt where it changes direction, the curves and angles of the tools as closely as poss~ble.
so pressure needs to be eased a l~ttleat this point. Bear m mind that you can change shpstone shapes,
The amount of rotatlon that a gouge needs and use smaller sl~pson larger tools.
depends on its sweep - the amount of curve it
has. Flat gouges requlre only a slight turn at &e
wrist; qu~ckergouges a lot more If the wrlst
actlon becomes uncomfortable, you may have to By way of example, let us put an Inner bevel to a
hone the edges of the quickest gouges in sectors medlum gouge.
which you then carefully merge With flex~ble
@ Rest the round back of the blade on the edge
wrlsts thls IS not normally necessary up to the of the bench w1th about l m (25mm) projectmng
sem~c~rcular (no. 9) gouges, but the U-shaped
upwards and at an angle of about 45" away
gouges can be more of a problem. They are best
from you.
dealt with as a comb~nationof flat and curved
bevels; details wlll be glven In the section on Q Usrng some 011- wh~chcan be taken up from
rndrv~dualtools (page 204) the benchstone - place the slip Into the mouth
of the gouge. Hold n between your fingers and
By constantly monltorlng the hne of hght at the
thumb at a shallow angle. Make sure your fingers
edge, and adjusting whlch parts of the bevel are
clear the sharp corners of the blade A right-
belng honed, a stra~ght,even contour will result.
handed person would normally hold the slip ~n
As wlth the ch~sels,it is a good Idea to make a
the r~ghthand.
short stroke wlth the gouge moving at 90' to the
normal d~rect~on. The subsequent scratch mark Q With firm pressure, rub the stone backwards and
will show you whether the bevel has become forwards; if appropriate, work from s ~ d to
e s~de
rounded or rema~nedflat. As the grade becomes and diagonally as well. To keep the angle of the
finer, changes m the abrasive marks on the bevel Inner bevel flat, avo~drocking the slrp up or
can also be used to monitor the angle at whlch down (Fig 12.18). Work evenly across the edge
the bevel is presented. and Include the comers, but be careful not to
over-sharpen them.
Some carvers sharpen the11 gouges by mbblng the
bevels on a benchstone rn the same d~rect~on as that @ Do not let more than half to two th~rdsof the
descr~bedabove for the chlsel As the gouge 1s moved slipstone project from the blade. To put thrs
backwards and forwards lr is rotated from one stde to another way, always keep a substantla1 amount
the other, often ~n a figure-of-erght pattern. I have of the s l ~ ~ s t o mn-cannel
ne (Fig 12.19) Thls
always found it difficult with this method either to means worklng In short, rap~dstrokes. If the
produce a straight edge with comers, or a flat bevel; lt slipstone projects more than thls, there 1s a
also wears the stone in the centre more qu~ckly danger of ~ t coming
s off the blade completely.
 W O O D C A R V I N G T O O L S . MATERIALS & E Q U I P M E N T

Fig 12.18 Do not roc

the slipstone up or do'
as it is mowed backward
and forwards

Almost invariably, the sharpening hand starts .-, alternative is to rest the gouge in one of your
a return stroke, only to strike the sharp cutting hands and not against the bench. For a right-handed
edge of the tool with the slipstone - or with person, the gouge would be held in the left. Allow the
your fingers. hand holding- the handle of the gouge
- - to relax so that
the round back of the blade nestles in the angle
@ Work in conjunction with the benchstone:
between the thumb and first finger - this hand is sup-
drawing the inner bevel back with the slipstone,
ported by holding the elbow in to the body. Work the
cleaning and working with the benchstone,
slipstone with the other. This method is more suited
returning to the slip, and so on. The line of
to smaller tools and the final, more delicate stages
light on the cutting edge is, as always, the guide
of slipstoning. It allows the work to be held a little
to where the slip needs to be applied.
closer to the eye.

Fig 12.19 When pushing the . ,-. be careful not to come o f the edge - leave something like one third in-cannel

188
F

THE PROCESS OF SHARPENING

Another approach that suits some carvers is to fix the @ A t the end of this stroke lift Lhe chisel clear
movement of the stone and rub the gouge over it, and place the bevel flat on the strop at the far
rather than the more usual reverse situation. This end again. Draw the blade towards you for a
method is not recommended, as visibility of the edge second stroke.
is not so good.
O This action is repeated a few times on one side
of the chisel, then the blade is tumed over for
an equal number of strokes on the other side.
STROPPING You can strop the tool quite vigorously, in
which case it makes a slapping sound on the
strop as it is placed for each stroke.
METHOD:
CHISELS
METHOD:
GOUGES
@ Llne up the benchstrop end-on, supporting the
near edge with the fingers (of the left hand, for
a r~ght-handedperson).
@ Wlth the strop end-on, hold the gouge as you
dld the chlsel, wlth the extended fingers in-
Q The strop is always used with the blade belng cannel.
drawn towards the user, the edge dragg~ngso as
not to cut the leather.
Q Start at the far end of the strop w ~ t hthe gouge
tumed on to one comer. Draw the blade
@ Hold the chisel around the shank with the right towards you with firm pressure at the same time
hand. The first two fingers extend along the as rotating the wrist to rock the gouge on to

-
metal, but keep them back from the cutting its other comer (Figs 12.21 and 12.22). The
edge roughly the length of a finger joint. gouge arrives at the near end of the strop
facing the opposite way. Keep the bevel flat by
8 Place the bevel flat on the furthest part of the
maintaining the angle of presentation.
leather and, with firm pressure, draw the tool
along the strop towards you (Fig 12.20). Try to O Lift the gouge clear of the leather, and return
maintain the angle and work on the bevel - not it to the far end for a second stroke. This time
the edge, as that will take care of itself. start the gouge on the opposite comer and

E - - - - - -- - - - - - - -

Strop leather

Fig 12.20 When stropping, maintain the same angk and always drag tk edge to avoid cutting the leather
 - WOODCARVING TOOLS. MATERIALS & EQUIPMENT

Fig 12.21 Using the benchstrop involves TOtahng the gouge as it passes along the leather, whik keep~ngthe bevel comlrtcntly
f i t on as su$ace, lzft it ooff the leather for the return stroke

repeat the rotating stroke; this completes

one cycle.
@ Repeat the cycle several times. Do not land There are two dangers in using the benchstrop:
heavilv on the corners.
~ ~

Cutting the leather

@ After a few cycles of stropping, use the slipstrop Avoid running the tool into the strop by making sure
on the inside.
the blade is lifted clear of the leather surface on the
@ Only a few passes are needed to maintain the return strokes. Develop a habitual action that auto-
edge; stropping can be quite a brief business. matically ensures this.
 ---- T H E P R O C E S S OF S H A R P E N I N G

Cutting your hand

There is a danger of curtrng rhe hand that is steadying
rhe strop - the thumb, especially, can be caught by a
negligent forward stroke of the cawing tual returning
though the air (Fig 12 23). Since the edge is now
extremely sharp, th~sdanger must be taken senously.
The strop needs some steadying, slnce r t tends to
be pulled towards you as you use it. Pins beneath the
mountlng board (see page 172) wtll largely anchor it,
and only a llghr touch of the hand wll be needed to
steady it. This steadyzng hand must be positioned ra the
srde of the working area, out of the path of the blade
entirely. The positloncan be to one side, at either end Fig 12.23 The hand that steudres the strop mmt be kept
of the sttop, out ofthe way of the retumtng c m n g edge
 -
- WOODCARVING TOOLS. MATERIALS & EQUIPMENT

By experlmenbng with the safest, yet most relaxed As wlth sllpstones, be aware of the fingers and the
hand posltlon - and by be~ngmindful of the move- vety sharp cutt~ngedge.
ment of the tool the danger of cutting yourself can
-

be ellmmated.
INDMDUAL TOOLS
SLIPSTROPPING IN DETATL
These notes should be read in the context of what ha.
8 Posltlon the gouge or V-tool as when uslng been sad prev~ouslyabout:
sllpstones.
the shapes and profiles that carvlne- tools need
@ Agam, the sl~pstropmust move away from the the use of the shaping and sharpening
cuttlng edge Place it on the ~nsldebevel and
equipment.
push it forward wlth firm pressure Into the air
and beyond the edge (Rgs 12.24 and 12.25).
Study and refer to this information first. I have tried
O Return the slipstrop ckar of the cutting edge and to avoid repetition as much as possible but, for the
position it for a second forward stroke. sake of clarity, some is unavoidable.

Fig 12.24 Slzpstrops must

only be pushed out of the
cannel, to awo~dcutang the
zather

With accurate grinding it is poss~bleto go straight

up the scale to the finer stones and save tlme. The
skill of knowing whtch stones to use, and when,
comes with practice.
Decide first on your bevel angle. As a gu~de,an
overall angle (includmg an Inside bevel) of 20-25" IS
a useful, average - of
- one. In practrcal terms, a leneth
bevel between two and a half and three times the
thickness of the blade would be approxtmately nght.
W~thoutan mnslde bevea: all the angle is taken on
the outside.
W ~ t an
h rnside bevel: make the Inner bevel
Fig 12.25 A k&r sErpsnop w ~ ldeform
l to fit the sweep of between one quarter and one th~rdthe length of
the gouge as it a pwhed forward the outer bevel.
 T H E PROCESS OF S H A R P E N I N G

Wlth a carvlng chisel: the angle and amount of Use the side of the grinding wheel to remove
bevel are divided equally between both stdes. any hollowness in the bevel, or leave this untd
the next step.
Ir may be helpful in the beg~nningto make a wooden
@ Set the oilstone end-on, present the bevel flat
templare of what the sharpening angle looks like m
and hone b ~ t sides.
h Repeat equally on both
order to get some feel for it. In practice, no experi-
sides, regularly check~ngthe whtte line and
enced carver estimates these angles to accurate
bevel scratches.
degrees; it is done more by feel, and whether the tool
cuts as you want. When the llne of hght reaches hair thickness,
push the edge into a plece of clean scrap wood
FLATCHISELS to remove any burr. A llttle more work may
then be necessary on the coarse stone to return
€8 Grind the edge square and esrabllsh the comers. the ltne to uniformly ha~r-thm.
The coarse benchstme may he preferred to the
Q Set the Arkansas stone end-on and proceed m
grinder, especially for the finer tools. The yl~nte
the same way. After every ten strokes on each
ltne of l~ghtshould be unbroken along the
s~de,push the blade mto scrap wood to
whole length of the edge.
emphasrze the l ~ n ofe llght and strengthen the
@ Make one or two perpendicular passes on the edge. As the l ~ n ethms, push the edge into the
oiled Arkansas stone to clean and refine the wood every five, then every couple of strokes.
wh~telme. Do not raise the handle to make the lrne
disappear more quickly, but proceed patiently.
1 8 Grind the bevel Bat to the requtred angle on
I both sides of the chtsel, w t h the heel ~arallelto 0 When the line is no longer visible, and does not
I the cutting edge. The edge should be in the reappear when the edge ts pushed Into the
1 centre of the blade (Fig 12.26). Make the white wood, try carvmng across the grain of a plece of
lme an even %in (lmm) thlck at this stage. softwood. Look to see If the line returns, or if
there are scratch marks on the cut surface, and
touch up the edge appropriately on the
Arkansas stone.
Flat bevel
@ Once a polished, clean cut has been produced,
strop both sides equally and then carefully wipe
the blade.
Square

SKEWCHISELS
€8 Grlnd the skew angle &st: the acute angle a t
the up of the blade should be 4 M 5 " for
general use, around 30" for more deltcate work,
Present the end of the blade to the wheel so as
to keep a stralght lme along the edge. T h s
grmding will make the edge look wedge-shaped,
narrowing to the long point (Fig 12.27).
\
Make one or two perpendicular passes of the
edge on the Arkansas stone to clean and refine
the whte l i e .
 W O O D C A R V I N G T O O L S , MATERIALS & E Q U I P M E N T

T
Fig 12.29 Wh@ntk cutting edge of tk skew IS m d
I m o s s the s m , the handkmusr be angledovirr the side ifor

r t g 12.27 The mmal setnng and lengthening of the skew 0 The skew 1s offered to the benchstones so that
angle makes the chtsel look wedge-sh@ed the edge orientates in the same way as the edge
of a firmer chisel - across the w~dthof the
@ Grind the bevel flat, with the heel parallel to benchstone. The handle angles out aver the
the cuttmg edge. To do th~s,posltion the handle side of the stone, to one s~de for one bevel, the
at a corresponding angle to the srde of the oppos~teside for the other (Fig 12.29).
wheel. Work more on the thlcker end of the
@ Hone the skew ,m the same way as a firmer
wedge, and remember that the polnt can be
chisel: two fingers exerting gentle pressure on
overheated very emly. Keep the cuttrng edge in
the blade, and working on both sides uniformly.
the cenue of the metal (Frg 12 28)
Keeo an eve on the whrte line and avo~dover-
sharpening the long point so removing the
-

most important part of the tool. Test the white

line in scrap wood.
@ Strop by holding and movtng the skew as if u
were a firmer ch~sel- but at an angle, as before
- and carefully wipe the blade. Test the edge by
slic~ngacross the grain of a plece of softwood.

Consider the V-tool or parting tool as two flat ch~sels,

jorning to form a cuttmg angle. There are three
bevels to deal wltk the central keel, and the chisel on
ather mde. CX the rhree bevels, it is the keel which is
the most Important not only does the keel form the
princrple cutung angle, but the way the keel ~tselfLS
fanned from the rhickness of the metal on each srde
rr+ 12.28 Feamres of a cwredy sharpened skew cbsel decides how well the tool cuts
 T H E PROCESS O F S H A R P E N I N G

You must, of course, have keen cutting edges along

the two chisels and at the apex of the V, at the keel.
It is crucial that the cutting apex and edges of the Straight edge

I/
V-tool - the parts that leave the finished cut - are
properly sharp, otherwise a ragged cut is inevitable.

rn
A lot of problems are caused by faults in the tools
themselves: different wall thicknesses on either side,
for example. If the sides of the V-tool are of uneven
thickness, or the cannel is not lined up accurately,
matching the two side bevels can be difficult. If you \Flat bevel,
straight keel
find that equal matching is impossible, but the bevels
are nevertheless flat and the cutting edges saaight,
then the tool should still be usable. Do check this

,,
aspect of your V-tool and make sure it is well made; if
you are running into unaccountable problems, this rounded
may be the cause.
As has been mentioned before, the apex of the V
is not actually a sharp angle but slightly rounded,
both inside and out (Fig 12.30). This is not that Fig 12.31 Features of a correctly sharpened vtool
noticeable unless you examine the groove cut by the
V-tool closely. The rounding-over allows the tool to sometimes. However, they are the least useful part of
negotiate corners more easily. The keel itself remains the tool; the apex of a V-tool will cut very well
straight and at the usual cutting angle of 15-20' (Fig despite missing comers.
12.31). Keep the corners: they are used in deeper cuts Specially shaped angle-edged slipstones will clean
off the wire edge and work any inner bevel into the
angle itself; different stones will be needed to match
the different angles of V-tools (Fig 12.32). Only a
small inside bevel is needed; it can be worked back
every time the tool needs touching up. The slipstone
must fit exactly into the angle; it is all too easy to

Fig 12.30 Close-up of the end of the lLtool, the apex of Fig 12.32 The three d~ferentV-tool an& wzll need
the V s not a sharp angle hut slcghtly rounded correspond~ngan& o n the shzpswnes
1
WOODCARVING TOOLS. MATERIALS & E W I P M E N T

work the slip to one slde of the angle rather than in @ Make one or two perpendicular passes on
the centre, which creates a notch (Fig 12.33). Most of the Arkansas stone to clean and refine the
the problems encountered in sharpening these tools white line
arise from improper shaping at the grinding stage, or
inaccurate application of the slipstones.
O Set the keel angle by presenting the tool across
the wheel; an average angle would be a bit less
It is not too difficult to sharpen a V-tool if you
than 20°. Reduce the thickness of the white
proceed step by step:
line at the auex to about %sin (1.5mm). The
outside comer of the angle will look cut off
4J Grind the edges square, with the V-tool
(Fig 12.34b).
perpendicular to the grinding wheel. If the tool
was supplied nosed, the edges will now look 0 Set the bevel angles on the wheel, treating each
like two wedges, thickening to the angle side of the tool in tum like a chisel and
(Fig 1 2 . 3 4 ~ ) . rendering the white lines to a thickness of about
B

Fig 12.33 i t is important

to align the V-tool s'lipstone
exactly with the apex when Correci alignment of sllpstone
working the angle; it is easy
to rub to one side and
notch the edge
n
I I

Fig 12.34 With the edges

but not the apex ground,
the tip of the V-tool looks
like two wedges (a). W h i n
the angk of the keel has
been set, the apex will look
cut off (b) . As the bewel is
set, the edge is reduced to a
z~nifonnkinness (c)
 THE PROCESS OF SHARPENING -

%In (lmm) The heel should be parallel w ~ t h over-sharpen the comers, as they are thinner
the cuttlng edges and the V apex al~gneddead than the central parts. If the line thins at any
in the centre. End-on, the angle w~llstill look point, slightly turn the wrist to exert a little
slsghtly cut off more pressure on the thicker part of the edge
and away from the thinner part. Take great care
@ Position the benchstones as for the flat chisel, to keep the bevels flat, and check the white
and select the appropriate angled slipstone for line and bevel scratches to make decisions as
the inside. Taking each side of the V in turn, to exactly how the tool should present to the
start reducing the thickness of the edge with the stone. Push the edge into scrap wood as with
Carborundum, then the Arkansas, stone (Figs the chisel, but do not rock the tool from side
12.35 and 12.36). There is always a tendency to to side.

Fig 12.35 Treat one s ~ d e

of the V-tool hke a c h e l

36 . . . then the
her (for clarity the oil is
 W O O D C A R V I N G TOOLS. MATERIALS & E Q U I P M E N T

-
Fig 12.37 A hook may be left towards the e m ! of i~ihbnigoil the h d i ~ i h i r v l l s:is
. alwn?s. p ~ e s e n tthe betme1 flnt
sharpening; this is caused by the thicker metnl at the angle nnd kesp chsiking rhee~icyb? in fins oj light
where the two sides ioin

@ As the white line attenuates and disappears

(Fig 12.34c), a point of light will be left at the
apex, probably projecting a little with a hook
(Fig 12.371, because the metal is thicker at the
junction of the two sides. To remove the hook,
turn the Arkansas stone side-on and lay the keel
flat on the surface, with the blade at its proper
15-20" cutting angle. Rock the tool, like a
gouge, from side to side and very carefully hone
the keel until the spot of light has gone (Figs
12.38 and 12.39). Overworking the keel will
cause the apex to dip back. Final spots of light Fig 12.40 Using an angled slipstone to finish the inside of
can be removed with the slipstone (Fig 12.40). the V-tool
 T H E PROCESS OF S H A R P E N I N G -

'ig 12.41 A specially

nade V-tool slipstrop. Keep

If the V-tool ends up with the edge dipping at than with a narrow-keeled 'v-toil, hut it is much
the apex, wavy, or In other ways unsuccessfully harder to sink the conical keel into the wood because
sharpened, one or two perpend~cularstrokes it is continually resisting - especially if the metal is
of the Arkansas benchstone w ~ l cutl the edge thick, or the tool is a large one. The following alter-
back and reveal the w h ~ t ehght from w h ~ c hto ation should bring a very significant improvement:
start agam.
@ Look again at the conical keel. You will see that
Q Test the edge by cutting across softwood grain as there is a pyramidal point o n either side at the
before; strop inside and out (Fig 12.41) and base of the cone, where the two side walls meet
carefully wipe the blade. the keel. It is here that you need to remove
metal equally o n both sides (Fig 12.42).

THE KEEL Q Place these poinm carefully on a coarse

Now tum the tool upside down to look at the keel; it benchstone (or the side of the grindstone) and
should be a straight line, of course, but additionally carefully remove metal, forming a facet at this
it should be a smooth, narrow line, in line with the point. You may find it easier to use the comer or
axis of the blade. If it is out of line, then the V-tool side of the grinding wheel, like a knife. Aim to
will tend to veer to one side like a supermarket shop- be neat. Get both sides the same, resulting in a
ping trolley. This fault is not common, but may arise parallel, narrow keel, bur stop short of the cutting
from uneven wall thickness. A much more common edge, which is already sharp.
problem, specific to some makers, is a keel which is
@ Quite a lot of metal may need to be drawn back,
more of a cone-shape: the point of the cone is at the
after which you can merge the facet with the
cutting apex, but as you pass back from the apex
rest of the blade metal on either side.
rhe metal thickens.
If you have a narrow keel, you can stop here and @ When you have removed the metal and
enjoy your carving. A conical keel, however, is defi- reduced rhe cones to a narrow keel, check the
nitely a problem: its wedge-like shape causes the blade cut in the wood. Smooth off the facets on the
to rise up out of the cut because the radius of the cone fine stones and make sure the keel is smooth
is larger than that of the initial groove made by the and slightly rounded. Your V-tool should now
apex of the V. Shallow cuts require n o more effort be ready for use.
 W O O D C A R V I N G T O O L S . MATERIALS & EQUIPMENT

Fig 12.42 Correcting a

conical keel: the feel and I
cutting properties of the Do not allow
V-tool are greatly improwed the ground
facets t o meet
by remowing the excess
In the middle,.
metal in the shaded area leave the keel
a llnle over
the w ~ d t hof
the V at its
apex
The faces to
be ground off
are centred on
this polnt
'where the
planes of
bevel, blade
and keel mee

Underside of
V-tool blade

Grind symmetrically, retaining the axial line

Macaroni tools are treated in similar fashion: regard not absolutely in the centre, it is still thrown towards
them as three chisels joined at two corners which are the middle of the metal. The bent V-tool needs little
very slightly rounded. A matching square-edged slip inside bevel.
is needed to work the inside. The main problem comes in holding these tools so
that you can present them to the benchstones cor-
BENT CHISELS rectly. Hold the blade Like a pencil to form the main
bevel (Fig 12.43). Work the reverse, or upper, bevel
Sharpen the edges of bent square-end and skew tools by turning the tool over and using the end of the
in the same way as the straight versions, but with a stone (Fig 12.44). Place the stone near the edge of
main bevel in contact with the wood, and a smaller the bench so the tool handle hangs free of the bench
bevel on the upper side. Although the cutting edge is surface. A little trial and error may be needed.

200
1 THE PROCESS OF S H A R P E N I N G

Fi, ,. ". .."*. ..-. ..--. ."- held like a pencil

Fig 12.44 Working the upper su$ace of a bent chisel

re-
GOUGES
@ Grind the cutting edge straight and square,
keeping the corners. Leave an even white line
of at least Xnin (2mm), or less if no inside bevel
is wanted.

@ Make one or two perpendicular passes on the

Arkansas stone to clean any jaggedness and
smooth the whlte llne

O Start by working the inside bevel with a coarse

slipstone held at a shallow angle, working it
evenly from comer to comer. Do not be afraid
of working the inside bevel; aim to throw the
cutting edge towards the centre of the blade.

@ Shape the outside bevel on the grinding wheel.

@ Position the coarse Carborundum benchstone
side-on. Present the bevel flat and sharpen from Fig 12.45 Rotating the gouge from one end of the
left to right while rotating the gouge (Fig 12.45), benchstone to the other. The motion is then repeated in the
as described on pages 184-7. The amount of opposite direction, without lifting the biade from the stone
 W O O D C A R V I N G TOOLS MATERIALS & E Q U I P M E N T -

rotation will depend on the sweep. Keep an eye @ Go now to the Arkansas benchstone and
on the line of light, reducing its thickness to slipstones. Keeping the bevel flat, work the
about Kin (Imm) (Fig 12.46) inside and outside bevels alternately, leaving
any part of the edge which is thinner than the
rest and specifically removing metal from the
thicker parts. Occasionally push the edge into a
piece of scrap wood to remove any wire edge.
@ As the line starts to attenuate, alternate a few
sharpening strokes with pushing the edge mto
the wood. All the line should disappear more or
less at the same time, leaving sharp comers and
a straight edge (Fig 12.47).
@ Cut some wood across the grain and see how
the resulting cut appears. If there are scratches,
look for tell-tale spots of light on the cutting
edge and remove them with a slip or
benchstone as appropriate
@ When a clean, polished cut 1s produced, strop
Fig U.46 An even and thin 11neof lrght is d b l e when the the ins~de(Fig 12.48) and outs~deand carefully
tool IS held at the ?;ght angle wipe the blade.

Fig 12.47 Features of a

correctly sharpened gouge
 T H E PROCESS O F S H A R P E N I N G

Fig 12.48 Using the slipstrop: start firmly and push the snop out of the mouth of the tool, keeping it at the same angk.
Raturn through the arr for a second forward stroke

203

i
 W O O D C A R V I N G T O O L S MATERIALS & E Q U I P M E N T

U-SHAPED
GOUGES LONGBENTAND SHORTBENT
GOUGES
These are the veiners and flurers: deep flat-sided
gouges (nos. 10 and 11). It is helpful to treat them Treat these tools in the same way as the parallel-sided
partly as chisels and partly as gouges a combination
- gouges, but use the slipstones only to remove the burr
of approaches - while being careful to marry the from the inside edge (Fig 12.50), not to form an
effects of each (Fig 12.49). inside bevel - which is not a particular advantage
After squaring off the end and cleaning the white here. Only a small part of the slipstone can be
line on the Arkansas stone, grind one flat side, then used; otherwise it will foul on the bend in the shank
the other, then the curve in between. Keep the bevels (Fig 12.51).
flat and the edge as a straight line. Sharpen on the
benchstones in the usual order, turning the stone
from a chisel (end-on) to gouge (side-on) orientation.
The slipstone that is used for the inside curve can be
slid up and down the sides also.
Keep observing the white line of light, particularly
at the juncture of the straight and curved sections, as
these points can easily be over-sharpened and made
to dip back.
It is quite possible to sharpen U-shaped tools
entirely like gouges, rotating them fully 180' at the
wrist, but be careful not to lose the comers by over-
rocating from the flat sides.

Fig 12.50 Using a slip t ?we the burr on the

edge of a frontbent gouge

g 12.49 U ges can be dealt with as if they F ie end of the slipst m be used with a
were a combinanun uj ~iilseland gouge
 T H E PROCESS O F S H A R P E N I N G

Straight edge
---L

__t_
 - WOODCARVING TOOLS. MATERIALS & EQUIPMENT

When stropping, only short strokes can be made,

with the strop at the edge of the bench, if the outer
bevel is to be kept flat. To make longer strokes you
would have to lift the handle to clear the leather,
which would roll the cutting edge.

Fig 12.54 A buckbent gouge can largely be sharpened by

slipstoncng, cleanzng the outer bevel on the benchstone

bevel to the stone (Fig 12.55), cleanup and continue

to sharpen like a straight gouge. Keep the comers,
and keep the outer bevel flat.
Work as much in-cannel with the slipstones
(Fig 12.56) as outside with the benchstones, reducing
the white line of light until it disappears. The inner
surface wants to merge smoothly with the cannel, Fig 12.56
without any distinct bevel. sharpen a backbent gouge

Fig 12.55 The handle of

the buckbent must be lower
than the benchstone; bring
the stone forward to the
edge of the bench to allow
fm thzs
 T H E PROCESS OF S H A R P E N I N G

TAPERED
TOOLS Running a close series of grooves side by s ~ d eis an
excellent test (Ftg 12.57). Assumlng the wood is
Long and short-pod, spade, allongee or fishtail tools good, the ridges left between the grooves should
present no problems that are not encountered in the remain clean and Intact. If these rldges crumble or
parallel-smded versions. As they tend to have l~ghter, the edges of the cuts are tom; d the cuts contam
th~nneror more del~cateblades, it IS easler to over- scratch marks or ragged tra~ls;if the cuts are dull or
gr~ndor over-sharpen them, so a little more care is the cuttlng seems unduly hard work for the wood -
needed, espec~allyon the comers. I would suggest you some more sharpen~ng1s needed.
do not use the grindmg wheel at all, but start wmth the
Look at the llne of light, with a magn~fylngglass
coarse benchstone and slipstones. The bevels tend to
if necessary, for telltale spots of white.
be longel, for delicate finlshmg cuts, and often merge
Into the maln shank without a noticeable bevel. Look at the profile of the bevel itself to see if it is
rounded or 'rolled'.

TESTING FOR
SHARPNESS MAINTAINING
SHARPNESS
There must be something of the cavalmer In carvers
who evaluate, or demonstrate, the sharpness of a You could look at thls the ocher way and ask: why do
woodcarvmng tool by shav~ngham from the back of edges lose their sharpness? Gwen good-quality steel
t h e ~ forearm,
r or nicking t h e ~na~ls.
r Presumably they and tempering, there are several reasons:
scythe through a lot of body hamr when a large num-
Most beg~nnerswait too long before br~ghrenlng
ber of tools need sharpenmng.
the cut of their carving tools, and rhereby make
At the end of the day it is wood that is hemg
more work for themselves than need be.
carved - and very different types of wood - so it makes
more sense to test the cuttlng quality on spare pleces Tools can suffer from poor cuttlng rechn~que
of wood put as~defor thls purpose.
They may be scored badly.
Sl~clngacross the gram wlth a sharp edge wlll
leave a clean, pollshed cut withno scratch marks; the There is also the effect of the wood being carved.
tool w~llcut at a low presentation angle and move
easlly - it may even make a happy 'ssssp' nomse. Here are some guidelines to help keep tools sharp.

r t g 12.57 Runn~nggrooves together m medium-denszty carving wood a a good way to check the sharpness of the edge
 - W O O D C A R V I N G TOOLS. MATERIALS & EQUIPMENT --

that the tool is gradually becoming harder work, 0~

the cutting angle a little steeper - the effects of a
Never let woodcarving tools get into a really rounded bevel. I find I notice the effect after not
dull state - strop them as soon as loss of keenness using a tool for a while. There is a sense of having less
is felt. control of the tool; I then take a look at the flatness
of the bevel.
Keep the strops on the bench, in their correct
When a gouge has been used for some time and
place, along with the working tools. stropped regularly to keep it keen, try setting the
Get into the habit of stropping the tools bevel flat on the Arkansas stone, at the original
regularly. The tools become polished and bright, angle, and making a small, sideways movement. The
and this in itself eases them though the wood.

Strop correctly, keeping the bevel flat and not

rolling the edge.

Stropping a blade over a period of time gives rise tu

another effect which you need to be aware of. The
leather of a benchstrop is only firm,not rigid like the
oilstones. It 'gives' under the bevel moving along it,
curling back to shape when the edge has passed. This
flexing of the strop tends to roll the edge and round
over the bevel (Fig 12.58).However, as the cut of the
strop is very fine, the effect is only noticeable after a
prolonged period of stropping. Even then, this round-
ing is not so easily seen, as the bevel becomes highly Fig 12.59 The curved refiction on this highly pobshed
polished (Fig 12.59). It may escape a carver's notice su$ace is a clue that the bevel has become rounded

Fig 12.58 After a

szrbstantial amount of
stropping, the bevel staru
to become rolled, because
even hard leather flexes
before and after the edge is
passed over it. A power
honing wheel may produce
a similar effect, and more
quickly
 T H E P R O C E S S OF S H A R P E N I N G

If a gouge gets buried in the wood, try gently

moving the tool from side to slde - along the
cuttlng edge, not agalmt it. Thls IS not a good
Idea w ~ t qurck
h gouges. If such gentle persuasron
does not work, another tool is needed to
carefully remove wood from the sides of the
embedded gouge.
U-shaped gouges are vulnerable to cracking when
they are forced too deeply into wood. Pressure on
the bevels squeezes the two s~destogether. Never
comoel these veiners or fluters to cut too much.
or too deeply, at once
r ~ 12.60
g The 'candle' effect: afin$ rim ofpol~hedmetal
towards the edge. The duller, honed surface cTeeps towards n
as the bewe1 is f7attened The comers and stra~ghmssof the STORAGEAND CARE
cutnng edge eurll need checkzng owe7 too
Care is largely a matter of habit, Start wlth good-
quality tools, then:
appearance of a dull point of abrasion in the middle
of the bevel, contrasting with the highly polished Avoid damaging the edges, by using the bench
metal, indicates the bevel is rounded. A chisel can be discipline suggested in Chapter 7 (pages 111-13).
tested sim~larly. Suggest~onsfor careful storage are made in
Resharpen the blade m the normal way and you
Chapter 7 (pages 107-10). Check the edges
will see that the initial dull point of abrasion becomes
before puttrng the tools away rn the cond~tlon
a line; ~tthen qu~cklyspreads over the shlny bevel
you would ideally wish to find them in
towards the heel and the edge as the bevel flattens.
(Fig 12.61).
Eventually there 1s only a rim of shmy metal at the
very edge whtch has not, as yet, touched the stone Some carvers, when they get to the fin~shhmg
Thls brlght margln 1s traditionally called the candle stages of a carvmng, have a session of checkrng
(Fig 12.60). Do not be tempted to llit the handle to every edge for perfect sharpness and touch~ngup
get rid of it quickly, but carry on with the bevel flat.
Stop when the candle 1s put out, but be careful not to
over-sharpen. Beg~nthe cycle of stropping agam.

Tools also become blunt and damaged as much

through bad carvlng pxactlce as falling to strop. Tools
should be used to cut the wood properly prislng or
-

leverlng 1s not cuttmg, and wlll only damage the edge

of the blade.

I
Do not drag the cuttlng edge across the wood,
but enter and leave the cut cleanly.
Do not use the blade to lever or prlse wood
chrps away. Cut the tool In, cut it through and Fig 12.61 The notch m the edge of this gouge shouId be
cut it out. dealt wtth before putnng it away
 W O O D C A R V I N G TOOLS. MATERIALS & EQUIPMENT

any scratch marks they may have let ride in the Understandably, they want to get into the wood
rough stages of carving. Odd scratch marks may straight away, without having to sharpen the tools
be acceptable where a surface will he sanded or first. Tools catering for this market are available today.
overcut to finish. but not where the naked cuts At best. their bevels are set at what seems to be a
are left to be seen. good average angle, but in some cases the angle might
just be what the operative felt like that Friday after-
EFFECTOF THE WOOD BEING noon; 'ready sharpened' most often means the simple
expedient of polishing in a secondary (micro-) bevel.
CARVED
They may be sharpened by an automatic process or
Some woods (such as teak and some mahoganies) with some degree of hand skill, but they never have
contain calcium deposits that dull edges. If this is inner bevels and are most often shiny and polished.
happening, there is nothing to do but carry on In my experience, however, there is a n intrinsic
and have a final sharpening session before problem with these ready-sharpened tools. It is not
making the finishing cuts. a matter of the steel, the tempering or the overall
shaping of the tool - all of which may be excellent -
Particles of abrasive remaining in a sanded ,
hut the strength of the edge left by the sharpening
surface will also take the keenness off a n edge, so
process itself.
avoid sanding parts that will be carved later. This
Certainly a pre-sharpened edge looks sharp - but
applies especially to carving turned work, most of
start carving and it will be noticed that the initial,
which is sanded o n the lathe.
shiny cut quickly breaks down to leave trails of
Remember that different woods require different scratches. When a blade is shaqened o n grinding
strengths of bevel. If a cutting edge is tending to and buffing wheels which drag the metal forwards -
break up, it probably means the bevel is too long. away from the cutting edge - a microscopic feather-
ing of the crystal edge is produced. This is weaker,
or less suooorted. than mzhen the metal has been
Pm-SHAWENED TOOLS
2 L

drawn back from the edge - towards the handle - or

sharpened across it (see Fig- 12.1). After a short while
the cut surface is left with lots of little scratches,
Most carving tools are bought by the increasing num- which is entirely unsatisfactory for a finish straight

1
hers of people wishing to carve as a leisure activity. from the edge.

Flexible or
Magnify~ng adjuitable
glass

Kitchen Hanging

n
roll rags

Grinding I
Box for slipstones
wheel

Strop
Water I1
Coarse benchstone Arkansas benchstone
Fig 12.62 A possible
arrangement for a
sharpening area
 THE PROCESS O F S H A R P E N I N G

Once these tools have been resharpened, using the

normal honmng methods, the problem vanishes and
the qual~tyof the tool can show itself. So thts is a
pornt to bear in mrnd d you are coming new to wood- One aim of thrs chapter has been to instml
carving: by all means start w ~ t ha pre-sharpened
self-reliance by providing a repertoire of
edge, but make it your busrness to find out how to
techn~quest o deal with all shapes and
sharpen and maintam the edges properly, rather than
srares of carving tools, endling them to be
just expediently.
turned into exactly what you need to
achieve the best work.
In this chapter and the preceding ones we
THE SHARPENING AREA looked at some hdamental ideas about
'sharpness'; what features contrrbute to this
Ttme spent on sharpening is never wasted, but con- end; the necessary equipment and its
tnbutes directly to the quality of the woodcamng colrect use; how t o go about sharpening
as well as the enjoyment of carvtng itself. Wa+s and tools in detail; and, finally, how to retain
routines of keep~ngcarving tools keen are worth sharpness.
cultivating. If there IS room m the workplace, rhere
It was po~ntedout that skarpening is a
are many benefits in setting up a permanent area near
precise sktll but well withtn the
the bench specifically for sharpentng woodcarving
capabilities of someone who has the
tools, The area set aside need not be very large: just
manual dexizrlty and the desire to came m
enough room to work comfortably and leave impor-
the fizsr place. With the correct approach,
tant items for sharpening ready to hand. The space
the skills of sharpening woodcarving tools
warrants good lighting, perhaps its own adjustable
can be developed rapidly to an almost
Lght. The grmnder, wmth its cooling water, can be part
mttnctual level.
of the arrangement, or nearby and qulckly accessible.
The benchstones can be laid out next to the oil; L~keany skill worth acqu~ring,it does take
slrpstones convenrently placed; and 011, stropprng practice. It often involves learning by
paste, lutchen paper and rags handy (Fig 12.62). mistakes and by trying to improve the
Strops are normally kept on the carving bench next ped~manceof a tool every ume it needs
to the working tools. sharpening or touchrng up. It is not that
Another optlon is a pull-out drawer or ledge - you cannot came until you have p&cted
perhaps fitted to the bench - m whlch the shafpening the skill of skarpemng, but by aIways
stones are ~laced.This is not such a good arrange- seeking t o improve, do~ngthe best you can
ment, as wood chips and dust will always find the11 and trylng for a little better nexr time, the
way mn. will soon become second natare.
Havtng the sharpening and carvmng areas separate
'The sharpening practices of indiv~dml
helps keep dust and wood ch~psfrom one, and or1 and
carver5 vary, with 'grey' areas where
dirt from the other. Instead of getting out the bench-
op~iom differ. What matters m the
stones each time they are needed, they are simply
experience any carver is having of the way
waiting to be turned ro.
a carving .tool is cutcing, and how tbis fits
Make the sharpening area pleasant; see it as part of
with the actual cawing pzocess, Both the
your whole work, and keep it clean. The idea is to
final cming and the process of achieving
make the means of sharpenrng woodcarving tools so
it matter to the carver.
easy that sharpening becomes no bother whatsoever-
and carving itself benefits.
 CHAPTER THIRTEEN

ALTE RNATIVE
SHARPENING STONES

To describe and asess the other main types of

sharpen~ngstone currently available for use Instead
II
of or m combination with traditional oilstones
d
There are three types of sharpening stone which are cheaper than natural ones, and of consistent quality.
readily available and may be considered as altema- Understanding how these stones work will help you:
tives to the Arkansas-based oilstone set-up described to appreciate why they are known for their remark-
in the previous chapters. They are: ably fast cut but quick wear, and how they must be.
waterstones used and looked after.

diamond stones
ceramic stones.

WATERSTONES
Waterstones have been steadily gaining popularity
with general woodworkers as an alternative to other
benchstones since the 1980s. Many such woodworkers
~
I
i
I

i
naturally wonder whether the ones they have are i

1.
suitable for a new interest in woodcarving. I
Waterstones have the appearance of smooth i
bricks, and this is essentially what they are: bricks or
blocks of quick-cutting abrasive, employed in a wash
of water (Fig 13.1). Originally a natural stone from
Japan was used, but the readily available waterstones Fig 13.1 A basic set of waterstones: a combination st,
of today are predominately synthetic (and still lying on a polishing stone (mounted on a plastic base), and
Japanese). Modem synthetic waterstones are strikingly some water slipstones
All sharpenrng stones (wrth the exceptron of ceramlc sieved and graded like sandpaper, then bonded in
stones, see pages 2 2 2 4 ) conslst of sharp abras~vepar- a clay matrix; the resulting block is open-pored
ticles or crystals, which do the cutting, and another and friable. Such stones are usually left in water ready
substance which bonds these particles together. I n for use.
the case of waterstones, the bonding matter is soft The 250 grit is a coarse stone, roughly equivalent
and friable; it breaks down as the steel blade rubs over to a medium Carhorundum stone, but-cutting
it. The outcome is twofold: firstly, new, and sharp, much faster.
abrasive panicles are constantly appearing at the sur-
The 800 grit is called a 'medium' stone, relative
face as old material sloughs away; and, secondly, the
to the coarse 250; it is equivalent to a Washita or
surface erodes quickly.
An opposite scenario would be a very resistant softer Arkansas stone.
bond, as in polycrystalline diamond and ceramic The 1200 grit is finer again - comparable to a
stones. In this case the abrasive particles would not white Arkansas - but not fine enough for a
be replaced at the surface and would eventually dull - cutting edge which can produce a polished finish.
although this inight take a very long time- causing the
stone to lose its cutting properties. RESIN-BONDED WATERSTONES
All stones offer a balance between these two prop- These are classified as 'fine' or polishing stones:
erties of sharpness and durability. Waterstones have a 4000-8000 grit. They are much harder than the
soft binding and constantly present fresh abrasive vitreous bonded stones.
particles. In effect, the sharpness of the stone never Extremely fine particles of aluminium oxide are
slows down because the abrasive particles never have separated by forced air, bonded in resin and mounted
a chance to become dull. Hence the fast, and main- on a base. Being less porous, these stones are not
tained, speed of sharpening - and the need to have usually immersed and only need a sprinkle of water to
water sloshing around to remove the debris and flush the debris away.
expose new 'teeth'. There is quite a jump in grits from 1200 to 4000.
When you sharpen with a waterstone you see a A translucent Arkansas would be somewhere in the
rapid build-up of slurry; this needs washing away reg- region of 4000, so the 6000-grit waterstone is
ularly. Indeed, these stones need so much water that approaching the very fine black Arkansas which, to
some are actually kept in it. my mind, cuts too slowly to be of much use. However,
Waterstones erode quickly: narrow or small carving grit comparison is a teacherous area: the cutting 'feel'
tools can rapidly create grooves in the surface. This is of these stones is quite different from that of Arkansas
not a small problem. A flat bevel requires a flat sharp- stones. Some carvers do continue with the 6000, after
ening surface with which to work. However, as these which n o stropping should be needed.
stones are quite broad, there's a lot of surface to play Some combination stones are available: 250 with
with before you need to flatten them and, since the 1200, for example. Waterstones tend to be full size, a t
stones are soft, flattening is a much quicker process least 8in (200mm) long, and they are available at an
than with oilstones such as Arkansas. extra-wide 25in (64mm); this size is designed for
plane irons, but may be attractive to carvers for the
amount of surface which can be used before the stone
needs to be flattened.
There are several firms producing waterstones, which
fall into two categories:

VITREOUS B O N D E D WATERSTONES At the moment, water slipstones come in limited,

These make up the coarser grits of stone: 250-1200 larger sizes and a sporadic range of grits. However,
grit. The particles (often silicon carbide) are first they are becoming more readily obtainable, and in a
 W O O D C A R V I N G T O O L S . MATERIALS & E Q U I P M E N T

I wider range of profiles, as manufacturers begin to a squeezable bottle for rinsing the stones as you
I
, +; appreciate the needs of woodcarvers. Study different use them
tool suppliers' catalogues to see what is available. You a means of periodically flattening their surfaces
may well need a few oil-based or other slipstones
I
to create inside bevels o n smaller tools, or you may
prefer to use the waterstones just to finish off.
CAREAND MNNTENANCE
Water slipstones must be kept in (and used with) There are two aspects of waterstones that need to be
water in the manner of water benchstones. considered in detail:
Because the slips are as quick-wearing as other
waterstones - and have delicate comers and edges - STORAGE
creating and keeping a fine angle for the inside of the Stones below 1200 grit should be kept immersed in
I
V-tool is deft work. O n the other hand, the softness water, or at least soaked for a couple of hours before
of the waterstone material makes it readily possible to you use them. Indeed, when you buy a new water-
I shape slipstones to suit a particular cannel, using files, stone you should leave it soaking overnight to
wet-and-dry paper or diamond stones. prime it. It is not essential to immerse the stone fully;
capillarj~action will keep the material saturated.
A STARTER KIT I t is also not necessary - and usually not recom-
mended - to immerse the polishing stones (6000,
The w~destbenchstone glves you plenty of surface grit and upwards) in water. You can leave the harder
w ~ t hw h ~ c hto sharpen smaller carving tools before polishing stones upside down in a shallow container,
you need to flatten the stone Synthetic stones are of water, leaving any mounting block or base clear.
excellent. Probably the best for the newcomer IS Being harder and far less porous than the coarser
to try stones, just a sprinkle or squirt of water is all that is
250/1000 grit combination stone to do most needed to remove the working slurry.
Slipstones are stored in similar fashion.
of the shaping (these tend to be narrower, at
Many users just dump all their stones upright in a
2in/50mm)
bucket or a lidded plastic tub, and take them out for
6000 grit for finishing. use; but do bear in mind that these stones are brittle,
so be careful not to bump them against each other:
This would give you a good range of grits to play with. you will easily knock bits off.
If you find you like using waterstones, then move If the base comes away from the harder stones,
on to full-sized, single-grit stones, which can be used allow both parts to dry and refix with mastic or caulk.
on both sides before the need to flatten becomes Lastly, never allow the water in which they are
unavoidable. stored to freeze. The freezing water will expand within
You will also need: the stone and crack it. And don't be tempted by
a water trough, bucket or tub, such as a plast~c antifreeze, which can dissolve the binding resins in
food contamer, to store the waterstones the stone.
(some films make special trough and holder
FLATTENING WORN STONES
comb~nat~ons or 'ponds' that are well worth
This is your principal maintenance work. It is needtd
considermg)
far more often than with oilstones, but is done in sim-
non-slip carpet underlay, towelling or rubber to ilar fashion and a lot quicker. Try to do it before it
grip the stones, if you are not using a holder; the becomes a major problem - say, when there is a dip of
stone is placed on a little 'mat' of such material no more than !&in (1.5mm).
on a plastic tray, or partially immersed in a Don't think of it as a chore. Use those moments,
shallow trough when you leave your carving for a break, reflective,
 ALTERNATIVE S H A R P E N I N G STONES

thought, or to brew up. Have whatever flattening a waterstone holder that is sltting on its tray. If
system you use readily to hand. Resurfacing is actually you don't have these, several layers of kltchen
quite a quick operation once you get the hang of it. paper w ~ ldo.
l
You can flatten astone either wet or dry. However,
Q Use the stone as you would an o~lstone.Try to
flattening dry is a dusty process.
make use of the whole surface as much as
You can buy special flattening stones with an alu-
possible, to inmlmize the creation of grooves -
mina titanium coating of about 100 grit, but there are
flat bevels need flat surfaces
many alternative stones which will do this job very
well and quite quickly: for example, diamond lapping Q Rinse the slurry from the waterstone as soon as
plates or benchstones, even another waterstone. Use r t bu~ldsup to the polnt where it is startlng to
plenty of water to keep clearing away the slurry. cover the cutting edge, e~therw ~ t ba wash from
A simple alternative is to stick wet-and-dry silicon- the surrounding water or w ~ t ha squirt from your
carbide abrasive paper to a sheet of thick glass and rub plast~cbottle. This helps reveal the new, shalp
the stone in a wash of water. Match the abrasive - a t cutting crystals
least for the final finishing off - to the grit of the
@ When you are ready to move on to a finer
stone: 120 grit for the coarsest stone, 220 for the
stone, ease off the pressure on the blade and
middle range and 400 for the polishing stones.
work more w ~ t hthe slurry. This meails less
You can use files, benchstones and abrasive paper
abrasive working on the metal, w h ~ c hresults m
to reshape water slipstones.
a smoother bevel surface and less work on the
subsequent, finer-gr~tstone.

@ Return the stones to store when you have

It's a matter of minlmlzing the mess. Because of the finished with them.
amount of water needed, and the ease with w h ~ c h
@ If you stop at the 1200 grlt, then you w ~ lneed
l
water migrates, you had best keep the waterstone s k @ -
an aggressive strop paste (or a power strop) to
@nmg area well away f ~ o mwhere you are carpizng So you
achteve that final keen edge necessary for
will need a place to keep the stones - say a l~dded
leaving work straight from the chisel.
plastic tub a n d a place to do the sharpening.
The sharpening surface may be the lid of the tub
itself; a tray, or similar; or a shallower plastic tub that PROSAND CONS OF
allows the stone to sit partially immersed in water, WATERSTONES
which you then wash over with your fingers or the
I confess to having been a little unhappy with water-
blade to rinse off the slurry.
stones in the past. I disliked having to keep them
You will need your plastic bottle, or similar.
soaking in readiness, and preferred not to have water
Include your flattening system in your layout, ready
anywhere near the steel of my carving tools anyway
to use when needed. Keep towels, paper or othenvise,
(I feel that oil is actually 'good for them'). The
alwavs to hand.
unavailability of smaller slipstones, and intermediate
grit sizes, may be an inconvenience. Also, waterstones
USINGWATERSTONES wear quickly, and flattening them can be messy.
However, if you have them already, then you will
The sharpening positions and orlentations are the
~ r o b a bhave
l ~ come to terms with these aspects, and
same as you would adopt wlth any benchstone.
with the balance between fast cutting and fast wear.
@ Take whichever benchstone you need from the On the positive side, compared with Arkansas
water where it is stored Place the stone on the stones, waterstones (at least the synthetic ones)
plece of non-sl~prubber or carpet underlay, or In are inexpensive and very consistent in structure.
 W O O D C A R V I N G T O O L S . MATERIALS & EQUIPMENT

The rinsing fluid is cheap, clean and easily available. A completely different process, developed by
Waterstones cut quickly - in fact they are famed General Electric, grows a monocrystalline
for their speed advantage over oilstones - and you diamond.
can successfully sharpen carving tools to an appropri-
ate cutting edge using only the 1200 grit and a Poly- and monocrystalline diamonds have quite dis-
good strop. tinct properties and, thus, uses.
As with all sharpening systems, you must find a Both types of diamond are graded by particle size,
pattern of using and maintaining them which suits or grit, in a similar way to other abrasives. These
both you and your carving tools. abrasive panicles must be held together in a matrix
with another bonding substance to make bench-
stones or plates. Different manufacturers supply
different ranges of grit; some specialize in one type
DIAMOND STONES of diamond or the other. Although monocrystalline
diamond is generally seen as the best option, both
Diamond is, quite simply, the hardest of all mateyials. types of diamond are used, in a bonded form, for
It will cut any type of steel - high-carbon, tungsten, sharpening stones.
carbide, vanadium, whatever - and it will also cut any
other sharpening stone for the purposes of flattening
,or
~ .. reshaping.
A lot of poor-quality diamond, called bort, is pro- MONOCRYSTALLINE DIAMONDS
duced by the mining of gemstone diamonds. For a ('MONO-DLAMOND')
long time bort has found industrial uses in cutting This type of diamond crystal is more like a natural
wheels, for example, but it has alwaysbeen expensive. diamond than the polycrystalline: single and uniform
Over the last 30 years or so, two processes havebeen in Structure, it does not break or fracture easily.
develooed to creare diamonds, at more Monocrystalline diamonds are more expensive, and
accessible cost: are the commonest type for sharpening stones.
Monocrystalline diamonds of a uniform size (grit)
The Du Pont process imitates the tremendous are permanently bonded into perforations in a
heat and pressure of nature to create a nickel plate, leaving about one third of the abrasive
polycrystalliie diamond. exposed (Fig 13.2). In turn this nickel plate is backed

Fig 13.2 A
monocrystalline diamond
benchstone mounted on its
s tand
 ALTERNATIVE S H A R P E N I N G S T O N E S -

by a steel one, and finally moulded to a glass-fibre In general, diamonds are much quicker-cutting than
p~l~carbonate. The result is very strong; the whole the equivalent oilstone; but the finest grit does not
unit is virtually unbreakable. approach my benchmark of the translucent Arkansas
Benchstones are conventionally shaped, but with stone (around 4000 grit).
the diamond abrasive residing in a pattern of 'islands' Benchstone sizes tend to be larger than common
which you can easily feel if you run your fingers over oilstones, and they are used dqr or with a wash
the surface (Fig 13.3). The debris from sharpening of water.
ends up in the spaces between these projecting
islands, which eliminates the possibility of clogging. POLYCRYSTALLINE DIAMONDS
The downside is that the sharpening of small or ('POLY-DIAMOND')
narrow tools is difficult and, in some instances, may The diamond crystal in this case is multifaceted -
be impossible: the narrow edges snag and bump over more like fused clusters of tiny diamonds - and
the islands. tends to fracture easily into finer abrasive particles.
The principal manufacturer is DMT (Diamond In fracturing, new cutting facets are revealed. As the
'Machining Technology), who offer 4 grits, with a bonding agent is hard (unlike waterstones), these
colour coding: crystals do develop a less aggressive cut with time.
Polycrystalline diamonds are mostly used in lap-
* Exera-coarse (black): 220 grit, roughly equivalent
ping compounds, and are made into lapping plates
to a medium-grit oilstone
used for flattening other stones. However, these
e Coarre (blue): 325 grit, similar to a fine lapping plates are also marketed as sharpening aids
oilstone for woodworkers, and are sometimes described as
'honing stones'. I intend to use the term benchplates
Fine (red): 600 grit, similar to a coarse Washita
to differentiate the flat, uniform, plate-like shape
or soft white Arkansas stone
in which these polycrystalline diamonds are set (Fig
@ Extra-fine (green): 1200 grit, similar to hard 13.4) from the deeper, more conventional-looking
I
white Arkansas or the equivalent Japanese benchstone, with its islands of monocrystalline
waterstone: diamond, just described.

Fig 13.3 A close-up of

& dramond benchstone
 W O O D C A R V I N G TOOLS.MATERIALS & E Q U I P M E N T

Fig 13.4 Polynystalline diamond benchplates with their protective leather pouches

Benchplates or lapping plates are generally wider and break down to reveal new cutting facets. A new plate
longer than benchstones. In them, polycrystalline will wear in ('run in') from an initial forceful cut to a
diamonds are nickel-bonded to a precision-ground working level that remains more or less steady
steel backing plate (Fig 13.5). There are a lot more through its useful life. Eventually the cutting action
diamonds per square inch than in the monocrys- dulls as the diamonds are worn away and the backing
talline type, and the working 'feel' and properties are plate is reached. They cannot, of course, be 'fresh-
different. For one thing, polycrystalline diamonds ened' by lapping. Nevertheless, given careful use,
these diamond plates will still last a long- time.
Eze-Lap is the principal manufacturer, offering
tfiree grits:

Medium: 270 grit, similar to a fine oilstone

Fine: 600 grit, similar to a coarse Washita or soft

white Arkansas stone

Extra-fine:1200 grit, similar to a medium-grit

oilstone.

Again, the 1200 is not good enough, to my mind,

for sharpening a carving tool to an edge that will
leave polished facets straight from the cut. Further
Fig 13.5 Close-up of a polycrystulline diamond su&ce work will be needed, and t h ~ scan be done with a
showing the tiny cutting crystals good strop.
 ALTERNATIVE S H A R P E N I N G S T O N E S

Fig 13.6 A set of conical

diamond slipstones

DIAMOND
SLIPSTONES leave surfaces straight from the chisel, it is not fine
enough (the translucent Arkansas is around 4000), so
The 'island' style of monocrystalline diamond setting further work is needed. The best plan I have found is
does not suit curved surfaces or sharp angles such to couple this stone with a strop and aggressive paste,
as are found on slipstones, so the appearance of all or a power hone (power strop), which will produce
diamond slipstones is smooth, more like that of the the edge you need quite quickly (the same applies to
benchplate or lapping plate. ceramic stones). Buc do remember to keep the bevel
Instead of the usual parallel-sided profiles, dia- flat and bear in mind all the other general points
mond slipstones are made in conical shapes. about sharpening.
Although called 'cones', they are really half-cones, Coarser stones will be suitable for the preliminary
@lit longitudinally; I'll use the terms synonymously shaping of bevels. Fine (600-grit) conical slipstones
here. Small holes at each end allow the half-cones to are quick-cutting, and the set is worth having if you
be pinned to a board. A set of three fine (600-grit) intend working with diamond.
cones is available (Fig 13.6) If you intend to use dia- Remember, one of the additional and valuable
mond stones alone, then you will need this collection uses you have from these stones is the rapid flatten-
to deal with a wide range of carving tools. Some nar- ing, dressing or freshening of other stones. Indeed,
tow cones sold as 'knife sharpeners' come in coarse, some. carvers have diamond stones in their kits just
'fine and extra-fine grits; small 'files' are also available. for this purpose.

WHICHSTONES TO USE CAREAND MAINTENANCE

'Whether benchstones or plates, the broadest and The construction of diamond benchstones and plates
. ..
'bngest will be the most useful option in the long run. makes them vieually indestructible, except that the
The 1200 is the finest grit available, so this must steel content, not being stainless, is subject to rust. As
be your finishing stone; but, really, if you want to water may be used to lay the dust, there is the risk of
 W O O D C A R V I N G TOOLS MATERIALS & EQUIPMENT

rust spotting with prolonged contact. Thls does not

really affect their sharpening properties, but one con-
sequence is that any guarantee you have with the If you sharpen with the diamond stones dry, the
manufacturers will be invalidated if rust is present, as debris collects around the pores of plates or between
the stones or plates will be deemed to have been mis- the 'islands' in benchstones. This fine dust from
used. So, when you have finished with a diamond sharpening tends to get on your hands and migrate to
benchstone or plate: your carving. Wipe it off regularly and newer blow the
dust away - it might get in your eyes. I prefer using
Rinse (scmb out) the debris under a tap.
these stones with water, from a plastic bottle or flower
Dry it well. mister. This eliminates migrating dust and gives a
slightly sharper cut.
Store it in a dry place.
Not everyone likes the bumpy feeling as the blade
passes over the little islands in the monocrystalline
You can freshen the appearance of diamond bench-
benchstones, but this is a matter of experience and
stones by rubbing with a plastic eraser (one you don't
you canget used to it. Polycrystalline benchplates feel
mind having a little shorter).
more like a normal oilstone of the equivalent grit, but
The surface plate around the diamond in the
somewhat sharper.
monocrystalline diamond 'islands' is nickel. This will
be softer than the steel of the carving tool you want
WORKING WITH THE CONICAL
to sharpen. Take care that small tools, or those with
SLIPSTONES
sharp points, do not cut the nickel. This is an added
A conical shape - and you can find this shape
reason why sharpening small tools is tricky.
in oil slipstones as well - will deal with quite a
To help minimize the wear on a polycrystalline
range of cannels. The trick is to select that section
benchplate:
of the cone that is suitable for a particular inside
Don't use them for heavy metal removal, or drag bevel. If you concentrate on a part of the cone
the edge along with the tool vertical to square it that is too narrow, you run the risk of creating a
off. Use the grinder instead. groove or thin spot in the cutting edge. O n the
other hand, pick a part of the cone that is too
Don't press down too hard, particularly with
wide and you are in danger of losing the comers of
narrow blades.
the edge. Getting the right balance takes a little
Spread the work around the late; keep the practice, and the method I use with these half-
centre for wider blades and the outer areas for cones is somewhat different from the conventional
narrow ones. slipstones:

@ Have the half-cones fixed to a sharpen~ngboard

- ~t 1s Important they don't move. Keep a llttle
pot of water next to it.
Diamond benchstones and plates take their place in
your sharpening routine as any other benchstone. Q Orientate the cones end-on. I prefer the narrow
Tack the conical slipstones in a row to a board. end towards me, but try both ways.
Pinched-off panel pins beneath this board, as before,
Q Dip the tip of your gouge in the water,
allow you to tum it around to approach the cones
from either direction. Place the inside curve of the gouge (the cannel)
If you choose to use the stones wet - and I do on that part of the cone's surface which you
recommend this - then you will need a squeezable estimate is hayway between the point where the
bottle of water to hand; and keep some paper towels width of the stone is too wide and the point
for mopping and cleaning up. where it is too narrow.
 ALTERNATIVE S H A R P E N I N G S T O N E S

@ Rub the gouge back and forth a little. You w ~ l l cone. It will also broaden. At some point
see a black line of water on the cone; this is you will see the sides of the black line
metal debris from the cutting action of the approaching the tool comers; you have now
diamonds (Fig 13.7). reached the widest point and should go no
further (Fig 13.8).
Q Look at the gouge and you will see scratch
marks where metal has been abraded. You may @ Keep looking at the black water o n the cone
need to adjust the angle at which you are and checking the scratch marks in-cannel. You
offering the blade to the cone to get the right will see that the cone produces a beautifully
degree of inside bevel. smooth inner bevel quite quickly.

i@ Dip the blade again and, back at the cone, @ With flatter gouges, work across the blade as
extend your black line both ways along the well as backwards and fonuards. If you skew the
angle
- of presentation to the cone, you will
cover a broader surface.

These diamond cones are excellent for getting a good,

uniform amount of inside bevel to a gouge, whatever
other stones you go o n to sharpen the gouge with.

STROPPING
To get the final edge with either type of diamond
stone, more work w ~ t h
a finer abrasive is needed. The
best way I have found is either to use conventional
stropping with an aggressive dressing, or a hard buff-
ing wheel (see page 229).

Fig 13.7 Start in the middle of the sweee, gaugini: where PROSAND CONS OF DIAMOND
you are fiom the trail of biack metal debris in the water on STONES
the cone suqfuce
All diamond stones are fast-cutting - faster than oil-
stones of the same grit - because of the aggressive
arrangement of the crystals. However, the grits that
in my opinion are needed to give a final cutting edge
to woodcarving tools are missing. This is not a problem
for normal woodworking, where the cut surfaces will
be sanded or concealed inside joints; but for carving
you need to hone (polish) the inside and outside
bevels, and the cutting edge, further with a good strop
or honing wheel to get that keenest quality.
Diamond stones are long-lasting but will wear out.
The average individual carver (as opposed to a class,
say) should get many years of good service. Of course
diamonds are the one kind that cannot be re-dressed,
or refreshed, by lapping.
Fig 13.8 G o no hrther than the width of the edge, or you However, one good use for any diamond bench-
will lose the comers stone or plate is thii very process of lapping: flattening
 WOODCARVING TOOLS. MATERIALS & EQUIPMENT

another stone by rubbing it to and fro on the diamond The ceramic grit particles cannot be broken away to
surface. If this is all you want your diamond stone for, reveal fresh, sharp cutting surfaces; they can only
then a coarse stone is best; the finer ones will still do round over and lose cutting power with time.
the job well, albeit slower. However, since ceramic stones are only slightly
Diamond stones are well over twice the cost of less hard than diamond (around 92% of diamond
coarse oilstones and ceramic stones, but still a lot less hardness), they wear very slowly: the harder ones are
than the translucent Arkansas. said not to wear noticeably in the course of a 'normal
The bumpy surface caused by the 'islands' in the lifetime'. In this respect they represent the opposite of
benchstones does put some people off, and makes it Japanese waterstones, where the friable bonding com-
very difficult to sharpen small gouges. In fact, my pound continually reveals new, sharp grit. They can
impression is that these stones are more suitable for only be resurfaced (lapped to freshen or flatten them)
carvers using large gouges, perhaps for sculpture and with a diamond stone.
larger, less detailed work.
TYPES
OF CERAMIC STONE
C E M I C STONES' Since they have no 'grit' as such, ceramic stones are
not easy to compare with other stones, and the feel
when you use them is markedly different. A major
Ceramic stones are, in effect, made in high-tech vol- manufacturer of ceramic stones is Spyderco (USA),
canoes. Alumina particles (synthetic sapphires) are who offer three versions in colour-coded boxes:
mixed with a ceramic bonding agent and vitrified in Medium grit (dark blue box) is roughly equivalenf
kilns under high pressure at around 1,650°C
to an 800-grit stone, such as a Washita or soft
(2,67Z°F),the firing taking as long as three days. The
white Arkansas stone.
result is a uniform, monolithic structure (Fig 13.9),
differing from the majority of artificial stones in Fine ceramic stone (light blue box) is somewhere
which sieved abrasive particles and their bonding around 1200 grit, about the same as hard white
material fonp a matrix that breaks down with use. Arkansas or the equivalent Japanese waterstone.

Fig 13.9 Ceramic

benchstones and slipstones
The colour of the box
indicates the grit
 ALTERNATIVE S H A R P E N I N G S T O N E S

+r Ultra-fine ceramlc stone (black box) 1s around stone you feel small bumps and an irregular amount of
10,000 gnt, very slow-cutting and produc~nga friction. T h e remedy is quick:
mlrror finish on the bevel.
@ Turn the stone over for the moment and finish
your work o n the clean side.
Benchstones are of the standard 8 x 2in size (200 x
50mm), and the commonest type comes in its own Q Scrub the stone with a scouring household
protective ~ l a s t i cbox with non-slip rubber feet. cleaner or detergent and water, using a brush or
a nylon scouring pad.
CERAMIC
SLIPSTONES €3 Rinse thoroughly in water.

The number of available slipstones is limited, and @ Allow the stone to dry before re-using; drying is
these tend to be small in size, presumably because of fast because the stone is non-porous.
ghe high manufacturing cost.
Because ceramic stones are so hard, it is virtually You might also do this if the cutting surface becomes
I impossible to shape pieces into slipstones for a partic- contaminated (slippery) with oil.
ular cannel. This means that it is likely you will have
-. Otherwise, ceramic stones are so hard that they
m mix and match with oil-based or other slipstones. will not wear or dish like other stones. They will,
however, eventually dull as the cutting particles
round over and are not regenerated with the loss
of bonding matrix. You notice one day that the stone
There is a very big jump in grit size from fine to ultra- is cutting less sharply, more slowly, and it needs
tine, and the grade equivalent to the translucent freshening. This is a job for a diamond benchstone or
Arkansas stone (around 4000 grit) is missing. The lapping plate-nothing else is hard enough. Just rub
fine stone does not give what I consider to be the the ceramic stone on the flat diamond stone for a few
acceptable level of honing for a final cutting edge, for minutes to reveal a new abrasive surface, and test
wood surfaces left straight from the chisel. The finest with a carving tool.
is too fine, removing so little metal that it is hardly a It can be difficult to keep your ceramic stones
replacement for a strop, and this seems to me to be well away from sharpening oil, especially if you are
the best option: finish off with an aggressive strop mixing the use of ceramics with that of oilstones.
paste or a hard honing wheel to polish. Once oil contaminates the cutting surface, the steel
So, the two most useful to carvers are the medium tends to skid along it and the only remedy is washing
and fine stones, followed by further work with a strop as above.
and a good abrasive compound.
As slipstones are limited in their shape, obtain the USINGCERAMIC STONES
few you can.
All ceramic bench- and slipstones must be used dry.
CAREAND MAINTENANCE Apart from this difference, the use of ceramic stones
is straightforward and follows the normal pattern
Ceramic stones are brittle. Use and keep the bench- (Figs 13.10 and 13.1 1). Since there are no pores
stones in their boxes; be careful not to drop or knock between grit particles, liquid is not needed to flush
the slipstones. away debris. Any moisture will act as a lubricant,
Because ceramic stones are used dry - without oil inhibiting the friction needed to cut the steel.
or water to wash away debris - the surfaces become This dust from the sharpening does have a ten-
covered with a black dust. This is normal but, after dency to move or get blown around. Do make a point
some use, the surface of a ceramic benchstone tends of keeping your hands clean for the carving. Neuer
to clog and glaze over. As you pass the bevel over the blow the dust away; if you are not prepared t o wash the
 W O O D C A R V I N G T O O L S . MATERIALS & E Q U I P M E N T

Ceramic stones are very consistent and extremely

hard-wearing; they are clean to use, and thus suitable
for in-home, travelling, or similar situations where
cleanliness is important. They are also quite a lot
cheaper than Arkansas stones.
There is a particular 'feel' when the blade passes
over the ceramic surface, and a user accustomed to
benchstones with porous grit may find that this takes
some getting used to. .
Although hard-wearing, their cutting ability does
fall off as the surface wears, a situation which is easily
remedied but does need a (harder) diamond stone or
lapping plate.
Fig 13.10 Shaqemng on the ceramic benchstone is done The manufacturer fixes the shape of ceramic
dry, but otherwise m the n o w 1 manner stones; they cannot be ground to a different shape, so
calvers are dependent on a limited range of slip-
stone, wipe off the dust with a v e v slightly damp stones. What is missing is a wider range for larger,
paper towel when it builds up. Glazing, where the broader tools. However, with strops to finish and
tool skids and doesn't actually cut on the stone, will oil slipstones for extra shapes, a carver can readily
still happen; the stone must then be washed as sharpen a lot of tools well within the range available.
described above.
Of the two, lubricating oil will create more of a
problem than water and must be kept away entirely.
This can be tricky if you are mixing conventional oil-
based slipstones with ceramic benchstones; it is easy
to transfer oil from your fingers or the blade. Do be
scrupulous.

PROSAND CONS OF CERAMIC

STONES
Ceramic stones lie at the space-age end of sharpening
technology, and I do hope we see more developments,
especially some filling-in of the big gap (1200-
10,000) in the grit range. Fig 13.1 1 Using a ceramic slipstone
 C H A P T E R FOURTEEN

ELECTRICAL
SHARPENING METHODS

To survey the avhlable equipment for power

sharpening
To assess how d ~ t equipment
s can best be used t o
produce sharp, well-maintained tools

Electrical means of sharpening woodcarving tools I sharpen my tools on sharpening machines about
are being pushed more and more in the direction of 95% of the time. I am all for them; they have gained
the carver, marketed with the promise of 'ultra-sharp' me many hours of carving time. However, I never
edges in the ,wink of a n eye. When you power- encourage beginners to start with power sharpeners;
sharpen, you are involved in a very different process I teach benchstone sharpening. 'Why?' you might
from bench sharpening. Without any doubt, the ask, if I use sharpening machines myself so much?
h i s h e d product is achieved much more quickly, but My experience is simply that this approach gives
- as I have pointed out many times in this book - beginners the maximum understanding of what is
there is more to correctly sharpening a caruing tool needed in woodcarving tools, and the hest level of
than simple speed and a sharp cutting edge. Putting aside skill in the long run. And teaching skill is what this
marketing claims, the fact is that power sharpening book is about.
may suit some carvers, but not others. Sharpening A careful beginning with bench- and slipstones
machines perform some operations very well, but will ensure that carving tools are sharpened correctly,
others not at all. In short, they have advantages and cut well and efficiently. Then, when you do even-
and disadvantages. tually introduce electrical help, you will find it easy to
To be clear about my view on electrical sharpening maintain this professional level, and you will be able
methods: there is nothing 'holy' about sharpening by to deal with any carving tool that machines can't
hand; nothing intrinsically better in hand over elec- reach. My advice is always:
trical methods; nor anything 'wrong' about buying
Learn to sharpen all types of carving tools well by
pre-sharpened tools. Who would willingly go back to
hand with bench- and slipstones.
converting timber by hand in a saw pit? The issue
really is about what you want, and whether these Only then introduce sharpening or honing
machines enable you to achieve it. wheels.
 W O O D C A R V I N G TOOLS. MATERIALS & E Q U I P M E N T

Monltor your tools in the l~ghtof your previous

understanding and alter your approach, or means
SHARPENING
of sharpenmng, to mamtain your high standards. MACHINES
The ceramic and diamond benchstones discussed in Effectively, electrical sharpening machines are exalted
the previous chapter are only available in compara- bench grinders, with wheels (or belts) in various com-
tively coarse grits, leaving an edge which is less than binations of hardness and abrasive power (Fig 14.1).
ideally sharp for work straight from the chisels. In this In fact, they commonly are grinders, and may still
case a quick, precise polish on a hard honing wheel have a grinding wheel at one end for shaping, as well
will soon bring the edge up to keenness, saving the as a finer 'buffing' or 'polishing' wheel at the other,
time needed to strop by hand. which the user impregnates with a very fine abrasive.
After an overview of sharpening machines and Other machines have buffing-type wheels at both ends.
wheels, I will discuss approaches to using them so as We have covered the grinding wheel before
to include or maintain the factors that I have (Chapter 10); it is used for preliminary shaping of the
proposed as making for an efficient, well-sharpened blade. A belt helps a lot in keeping a flat bevel, but the
carving tool. With this knowledge, you can 'assess only ones which seem to be available are intended
how useful such machines are and how they may suit for the equivalent of grinding - that is, major metal
your particular needs as a carver. removal - and are not suitable as honing aids.

Fig 14.1 A ryptwl ak&e sha@ening machine with p h g bek; &re are m& b&ng wheeb mrd a
&aff&ck on the nght which can be used fw o h &aswe wheels or a Jierrbk daft
 ELECTRICAL S H A R P E N I N G M E T H O D S

As an alternative to a grinder-like honing machine, belt drive from the motor to the wheels, and will
honing wheels and mops (polishing wheels made of usually feature an abrasive belt in place of one of
'fabric) are sold for mounting independently, either in the wheels.
.a drill chuck or in the chuck of your own motor or Power sharpeners are quite simple to use:
lathe. Those made,by Koch (Fig 14.2) would be a typ- @ When the wheel is up to speed, push the
ical example: one wheel is a harder felt for straight block of proprietary abrasive 'soap' against the
:edges and outside bevels, the other softer, to conform spinning surface (Fig 14.3); the block will melt
"t interior curves. into it (except in the case of a rubberized
When you buy separate wheels, do make sure they abrasive wheel).
run true and at the optimum recommended speed.
The Koch wheels, for example, have an optimum @ Apply the blade; a sludge of melted abrasive
builds up in front of the edge.
running speed of between 1,200 and 2,00Orpm, slower
than many sharpening machines and grinders. It is @ Move the blade as needed so the abrasive-
not clear what would result from a higher running impregnated wheel polishes the bevel and
speed, since the action of honing is always to com- creates the fine cutting edge.
press the fibres, but you may find particles diseniaging
from the wheel and, at the least, its life expectancy Now, if you know exactly what shape or profile of
(in terms of sharpening cycles) will be less. So, follow carving tool you want, and if there is a quick, accurate
recommendations. and safe electrical method of achieving it, then this is
The 'buffing' or 'polishing' wheel will be of a a sensible option and there is no question but that
fibrous material, such as felt or paper; there are vary- you should take advantage of it. Used in circum-
ing degrees of hardness or softness. From now on I stances where this is possible, sharpening machines
will call all such wheels honing wheels for the sake of are invaluable to the busy carver. However, you must
simplicity, regardless of what they are made of, to dif- bear in mind that power machines are limited in what
ferentiate them from the hard abrasive grinding they can do. They may be able to achieve enough
(shaping) wheels. to satisfy a particular carver, but only a part of what
Wheels are normally dr~vendirectly by the motor another may want. And there is no doubt that in
and rotate at a high speed, up to 3,000rpm. More inexperienced hands they are capable of producing
sophisticated and expensive machines will have a very undesirable results.

Fig 14.2 The Koch sharpening wF th ~w arbor ready Fig 14.3 The bu$ng wheels must be dressed regularly
for the chuck of a dnU or other power source, the abraswe with an abrasive compound, which is normally supplied by
compound wed with it a also shown the makers
 W O O D C A R V I N G T O O L S MATERIALS & E Q U I P M E N T

SAFETYNOTE tends to make events happen quickly: over-shaping or

plain bad shaping can easily result. A t this speed it is
Most importantly: all soft wheels must spin away from all too easy to remove comers, or to end up with a
the user to prevent the cutting edge digging in and cutting edge that is nosed, winged or undulating.
kicking back. This means that, if you make up your If you keep to a regime of maintaining sharpness,
own power sharpener by using a grinder (you can buy following the methods described in the previous
buffing wheels separately), then you must either: chapters, little more than regular, brief touching up is
necessary - any more and you are in danger of reshap-
Find a qualified electrician to reverse the
ing. The trick of 'sneaking up' on the edge by placing
direction of the motor. This is your best option;
the heel of the tool on the wheel first, then slowly
it is usually a simple job, but this may depend
lifting the handle, will also help to avoid mistakes.
on how the motor is made.

or: WHEEL
SHAPE AND SIZE
Tum the grinder itself around so the wheel Honing wheels are the same shape and size as a nor-
rotates away from you, and switch or adjust the mal grinding wheel. If the wheel is hard, it will be too
wheel guards and toolrests accordingly. The big - and the wrong shape - for creating a proper
problem with this is that the on-off switch inside bevel in anything other than a large, flat gouge.
often ends up on the wrong side. O n the other hand, if the wheel is soft, then you can
push the inside of a gouge into it to 'de-bun' or polish
If you don't modify the machine in one of these ways, the inside bevel; but this is not the same as creating a
then, although you may remember in which direction proper inner bevel, and you also run the risk of losing;
to offer your carving tools, the machine is quite comers. The only satisfactory way to create inside:
dangerous for anyone else who doesn't. The same bevels is to use smaller, specially shaped wheels, and,
~ r i n c i ~applies
le if you are mounting a honing wheel to alter the profiles of larger ones to suit.
in a power drill with an arbor.

As I suggested before (seepage 178 and Fig 12.1), it.

PRINCIPLES O F P O W E R is my feeling that with the wheels tuming away from;
HONING the operator, the edge is weaker than one sharpened,
across or into it. This opinion is based entirely on my
SPEEDAND ITS HAZARDS experience and not on any scientific trial.
When metal is drawn forwards it produces more of
Most wheels are about 6in (150mm) in diameter and a wire edge; even though the effect is micro~copic,~
turn at around 3,000rpm. It follows that, in one sec- metal is abraded forward by the buffing wheels. The.
ond, nearly 80ft (about 24m) of surface have passed resulting edge tends to crumble and leave fine scratch.
beneath the bevel as it is offered to the wheel. No trails in the cut. Metal drawn back, across or away:
wonder it abrades and polishes fast! Tools certainly from the cutting edge to sharpen it leaves a tougher,
get hand-hot on the honing wheels, if not actually smoother structure. This has greater resistance and.
hot enough to risk blueing. lasts longer.
The speed is a particular hazard for beginners who So it seems to me that tools sharpened on abrasive:
don't yet understand what shape is required of a par- wheels need touching up far more often than hand-,
ticular tool. There is no doubt that the cutting edge sharpened ones to keep the same quality of cut.
can be polished to a high level of keenness in a very Against this must be set the speed at which edges can
short time. However, the speed of honing wheels be rejuvenated.
 ELECTRICAL S H A R P E N L N G M E T H O D S

Additionally, because the honing wheel moves away

from the user to prevent digging in, I counter this
effect by offering the tool mostly, if not fully, across
the wheel, as described below.

HARDAND SOFT WHEELS

The softer the wheel, the more difficult it is to pro-
duce a flat bevel. That's why it is better to produce
and polish the bevel on hard wheels, and use soft ones
only for polishing the inner bevel to a finished edge.
A t a honing speed of 80ft (24m) per second across the
bevel, it is as if the tool has been rapidly stropped
many thousands of times. The effect of prolonged Fig 14.4 Shaping an ins& bevel on a Cratex rubberized
stropping o n a soft surface - even a leather bench- abinsive wheel. Note the dust-extraction hood
strop - is to round or roll the bevel, as d e have
already seen (page 208); and soft wheels are much RUBBERIZED ABRASIVE WHEELS
softer than hard leather benchstrops. A rounded Made by Cratex in the USA from a hard chemical
bevel means a higher cutting angle, which in turn rubber impregnated with silicon carbide particles,
means less control and more effort. these come in different sizes, up to grindingwheel
You really have to work against this effect. T h e size. Various grades are available, of which the fine or
firm. curved surface of a hard honine" wheel counters extra-fine are suitable for us. Rubberized abrasive
the ~ r o b l e mto some extent, com~aredwith the more wheels can be shaoed to suit the hollow forms of
flexible surface of a flat benchstrop; and the harder internal bevels - in fact creating inner bevels quickly
the wheel, the less this effect will occur. The two is a major benefit (Fig 14.4). Smaller sizes are avail-
hardest honing wheels are those made of dense paper able on their own to be mounted on a motor shaft or
(such as supplied by Rod Naylor), and rubber abrasive a driven spindle. I always advise dust protection when
wheels (as made by Cratex). These mostly eliminate using these wheels.
the problem. I use this wheel as an intermediary between
the fine grinding wheel and the abrasive-coated
TYPES
OF HONING WHEEL honing wheel. It is too coarse t o give the fine edge
you need, but will readily flatten a bevel offered side-
There are three main types of wheel used in sharpen- on to the direction of rotation. It is not used with
ing machines, and there should be little problem in abrasive paste.
swapping or changing to the alternatives you prefer.
Being soft, all these wheels must rotate away from the PAPER WHEELS
user. Some shaping of these materials is possible, Rod Naylor supplies these for use in his Supersharp
allowing them to be adapted for inside bevels and for system, or separately for use with a n arbor. They are
small tools, for example. used with abrasive 'soap'.
These wheels are made by compressing paper,
FELT WHEELS and have a different feel from felt wheels. The paper
These are synthetically st~ffened,and vary in firmness gives excellent results: a very hard wheel which takes
and hardness. Choose the hardest, and one that will abrasive well, and o n which precise honing and
keep a smooth surface without 'fluffing'. These wheels polishing is possible. Paper wheels can be shaped, but
can be shaped to some extent. Use with abrasive soap. seem to be available only in limited sizes, suitable for
Soft, loose-leaf, sisal and cotton mops are not suitable. use on a grinder.
 W O O D C A R V I N G TOOLS. MATERIALS & E Q U I P M E N T

Fig 14.5 A collection of

proprietary and other
sharpening 'soaps'; there
are many different kinds to
be had

.ABRASIVE
'SOAP' BLOCKS carving with increased vigour. Depending on the
make and the location, sharpening machines can be
The appropriate abrasive, for these sharpening quite noisy; this may be intrusive for carvers with a
machines is a fine one suitable for ferrous metals, and temperament that prefers quiet.
comes in a hard block or bar often called 'soap'. The
bar melts into the felt or paper from the friction COST
arising when it is pushed against the spinning surface Whether a machine is worth buying depends on the
of the wheel. balance between the outlay and the amount of use
There are so many different types of abrasive you expect from it. For example, such machines
soaps, in many wonderful colours and with so many would probably be of more benefit to a wood sculptor
different claims, that it is impossible to list them all with large gouges than an instrument maker with a
(Fig 14.5). Suffice it to say that suitable abrasives are few small ones.
readily available and, since they are inexpensive, it
is worth experimenting and exchanging notes with SAFETY
fellow carvers. Some are coarser - have a more aggres- Do assess safety factors carefully. All sorts of particles
sive cut - than others. are flung out from these fast-turning wheels: bits
of felt, abrasive paste - even grit, in the case of a
OTHER
CONSIDERATIONS rubberized abrasive wheel. Suppose you spend only
5 minutes a day on these machines, that's still just a
Before making or buying a honing machine, bear in little short of standing for 24 hours in front of the
mind the following points: fast-spinning wheel over the course of a y e a r plenty
of chance for a particle to get in your eye, or for you
NOISE to breathe in damaging dust.
Try to hear the machine you are thinking of buying. I strongly suggest keeping at least a good paper
'Many carvers enjoy the quiet of carving, as well as dust mask next to the machine. Get into the habit of
that of hand-sharpening their tools. Sharpening can slipping it over your nose and mouth even as you
b e a moment for reflection before returning to the switch the power sharpener on.
 ELECTRICAL S H A R P E N I N G METHODS

bear in mind the end result which you are after: the
correctly shaped cutting edge.
Obviously individual arrangements will vary, but
here are some considerations:
Have the grinder as a separate machine from the
sharpener. Grinding is major metal removal; use
the sharpener only for the last stages of
sharpening. If you find you have a lot of metal to
remove, then you should be on a grinder with
coarse and fine wheels.
Sharpening machines tend to be dirty. Site them
away from your carving area; wipe the carving
:,Fig14.6 in this machine there is no means of supporting tool afterwards; and check your hands for grime
the tool on the flat section of the belt, which means that the that can be transferred to the wood.
,biade has to be held in the air. Besides limiting the co~!ttrol Have one wheel as hard as possible (paper) for
over shaping, hovering the hand like this over the fat-mouing
outer bevels.
.belt is potentially hazardous
Have the second wheel slightly softer, so it can
Some machines have limited wheel guards and no deform for inner bevels and/or be split with a
toolrests; the tool is supported by the hand hovering knife blade to give several width options (Fig
in the air (Fig 14.6). This applies especially to those 14.7).
'svsterns' that are sold with an arbor to mount on A chuck on the end of the sharpener shaft will
a free motor. Take the time to make some simple
allow you to use a variety of small wheels for
wooden toolrests at least.
different purposes.
Long hair, loose clothing and such must be kept
well out of the way, particularly if you are using a
You can use a machine for just polishing (stropping)
drill-mounted wheel without guards.
a bench-sharpened tool, using a light, minimal touch;
I have already mentioned the importance of wheel
or for heavier sharpening, equivalent to what you
direction if you choose to make your own machine
might do on the bench.

HOW TO USE A POWER

SHARPENER
Most machines have only two wheels, one at either
end. I find I need several, in a range of widths and
profiles, and including smaller wheels o n chucks, to
cover the wide range of tools that I use. Even so, there
are some tools that are difficult to ~ower-sharpen
correctly: in particular small or tight-mouthed ones,
and those with sharp bends.
Try to make your set-up cover as wide a range of
tool sweeps as possible. Remember that you may need Fig 14.7 With a split wheel it is eossible to hone the inside
more than just the two wheels on offer. At all times of a gouge without damaging the corners
 W O O D C A R V I N G T O O L S . MATERlALS & E Q U I P M E N T ~ -

I
ACHIEVING
THE CORRECT
SHAPE
Recall some ideas from previous chapters: there are
three factors to consider when discussing whether a
carving tool cuts properly or not. It is not just a mat-
ter of a slick cutting edge: a tool can be very sharp yet
still cut badly. All these factors are important:

The beuel must be:

I
flat
at the correct cutting angle.
Fig 14.8 Present the heel first, then , E handle far
A n inner beuel is useful for: enou~hto amve at the edge, and no further
using the gouge upside down
Keep exactly the same angle of presentation on
increasing the overall bevel angle the honing wheel, using the toolrest (or, as I
prefer, supporting the tool with a finger placed on
helping to release the shaving.
the toolrest).

The actual cutting edge must be: Keeping a correctly shaped bevel is a really
important point: don't just think 'sharp edge'.
keen
Start by placing the heel on the rotating wheel,
with comers and then slowly lift the handle until the sludge of
the polishing compound shows you that you are
straight across
at the edge (Fig 14.8). In other words, work from
at 90" to the axis of the blade the bevel forwards.
To repeat: the harder the wheel, the easier it is to
Unless you have sound Peasons otherwise, this is what
keep the bevel flat.
I propose as your model for a correctly sharpened tool;
and I mean this to be the result of whatever method The best approach I have found is to offer the
you choose to sharpen them. So, bearing these points bevel almost side-on to the direction of rotation,
in mind, let us turn to power honing wheels to see first to a rubberized abrasive wheel (Fig 14.9) and
how the operation of an electric sharpener can con- then, to finish, the very hard paper one. You can
tribute to or detract from these qualities. present the bevel at up to 90' to the wheel (but
no more, or you risk a dig-in), as for grinding (see
KEEPING THE OUTERBEVEL FLAT AND page 179).
AT THE CORRECT ANGLE Don't press too hard; this will sink the metal into
The hard (fine) grinder or the benchstone is best the softer wheels.
to get your flat bevel to start with - this is part of
the primary shaping - i n d you should come to the MAINTAINING CORNERS
power sharpener with a flat bevel at the correct Losing a comer, or waving the edge, is a very simple
cutting angle. A rubberized abrasive wheel is a thing to do on what is, effectively, a power strop. The
good intermediary between the fine grinding user either over-rotates the tool, or concentrates on
wheel and the abrasive-coated honing wheel. the centre of the blade.
 ELECTRICAL S H A R P E N I N G M E T H O D S -

Rubberized abrasive wheels, paper and hard felt

wheels can all be shaped with files or scrapers. Do
protect yourself from the dust when you do this.
You may choose to split a wheel, using a strong
knife, to rive you several options for smaller tools
or, say, the apex of the V-tool.

O n a large wheel you can radius one comer and

create a hollow in the middle, giving you quite a
few options.

Small wheels can be mounted in a chuck, which

is either part of your power sharpener (see Fig
14.4),or in a separate unit such as a power drill.
Fig 14.9 Presenting the bevel across the wheel is ar
option, and helps to keep the bevel flat

Use the minimum amount of 'soap'. It is not

always easy to keep a n eye on the comers,
particularly if large amounts of sludge-building Sharpen~ng1s part of the whole carvmg
abrasive obscure the edge. It is not obligatory to package, but ~t need not be a big deal, w ~ t h
prime the wheel each time you use it - perhaps benchstones or otherw~se.
once every three times is all that is required.
Newcomers buying power-sharpening
Again, the harder the wheel, the easier it is to machines can quickly and easily produce
see the work. badly or inappropriately sharpened carving
tools, in which case they are really not
Be precise in your work.
doing- themselves much of a favour.
Pressure builds friction, which increases abrasion
T h e fact is chat beginners usually, and
speed: take it lightly. If you need a lot of
understandably, have n o way of knowing
sharpening, then perhaps you should be using the
what a 'correct', or even satisfactorily
grinder, or at least a hard rubber abrasive wheel.
sharp, woodcarving tool should look and
A good way to lose the comers of a gouge is t o feel like. I believe this is best learned in a
push the sweep - and thus the comers - Into a soft slower, more careful way first; this is
wheel wh~leattempting to polish the ins~debevel. priceless, but basic, knowledge and skill o n
which a woodcarver can build.
INSIDE BEVELS So, having acquired a foundation of quite
Only if the hard honing wheel is the same radius as
subtle knowledge, largely lodged in the
the sweep of the gouge, or smaller, can you get into
hands, bring in sharpening machines
the cannel for shaping or stropping the inside bevel.
where you can to speed up the process.
What many users of power sharpeners do instead is to
More machines and different designs are
push the mouth (cannel) of the gouge into a softer
becoming available. Incorporate them into
wheel, which deforms to fit. This can be fine for the
a well-founded sharpening strategy that
larger gouges, but with smaller ones there is a danger
always has in mind the correct shape and
of losing the tool comers, which you must try to
cutting qualities of your carving tools.
protect. So, for normal, grinder-sized wheels, some
changes are needed:
PHOTOGRAPHIC CREDITS

Photographs in this book are by Chris Skarbon,

O GMC Publications Ltd, with the following
exceptions:

Chrls Pye: pages 1 and 3; Figs 1.1, 1.3, 1.5, 1.6, 2.9,
3.2,3.28,3.29,3.30,5.1,5.2,5.3,8.3,8.8,9.35,13.3,
13.5, 13.7, 13.8, 14.4, 14.5, 14.7, 14.8, 14.9

Tony Masero: page v

Ashley Iles (Edge Tools) Ltd: Figs 2.3 and 2.4

GMC Publications/Anthony Bailey: Fig 10.2

Craft Supplies Ltd: Fig 10.3

The author and publishers wish to thank the above

individuals and companies for their kind assistance.
 METRIC CONVERSION TABLE

INCHES TO MILLIMETRES
.-
inches inches mm inches mm

9 229 30 762

10 254 31 787
11 279 32 813
1'2 305 33 838
13 330 34 864
14 356 35 889
15 381 36 914
16 406 37 940
17 432 38 965
18 457 39 99 1
19 483 40 1016
20 508 41 1041
21 533 42 1067
22 559 43 1092
23 584 44 1118
24 610 45 1143
25 635 46 1168
26 660 47 1194
27 686 48 1219
28 71 1 49 1245
29 737 50 1270
 ABOUT THE AUTHOR

Chris Pye has been carving professionally for over Chris Pye has written and runs a website
25 years, and owes his formative start to the master (http://m.chrispye-woodcarving.com) dedicated to
carver Gino Masero. His work is done mainly to the teaching, learning and love of woodcarving, from
commission, with clients including HRH the Prince which he edits the interactive journal Slipstones.
of Wales, and ranges from architectural mouldings He lives in rural Herefordshire with his wife Karin
to figure carving, furniture to lettering, bedheads to Vogel, a psychotherapist, and son Finian. His older
fireplaces. Individual pieces include his own expres- son Daniel has a degree in art and plays guitar in the
sionist carving and abstract sculpture. rock band Manchild. When not carving, teaching or
He has taught local and residential woodcarving writing, Chris Pye's other interests include painting,
classes in England for many years, and is also a b~kingand tae kwon do. A Buddhist for many years,
member of the faculty at the Center for Furniture he was ordained into the Western Buddhist Order in
Craftsmanship (http://www.woodschool.org) in Maine, 1990. This approach to being deeply affects his out-
USA, where he runs carving courses each year. look and attitudes to life and work.
He is the author of Woodcarving Took, Materiak @
Equipment (1994), of which the present book is a re-
vised edition; Carwing on Turning (1995); Lettercarwing
Chris Pye
in Wood: A Practical Course (1997); Relief Carving in
The Poplars
Wood: A Practical Inrnoduction (1998); and Elemenw
Ewyas Harold
of Woodcaruing (2000). All of these are published by
Hereford HR2 OHU
GMC Publications. He has also written extensively
about woodcarving for several magazines. Ernail: chrispye@woodcarver.f9.co.uk
 INDEX

A diesang (flatrenmg) 164-6 burr (on wood) 61 crysral structure of steel 22, 24,
Abbey Dorr Church, ollsrones, rypes of 161-2, huymg cools 52, 7 3 4 , 9 M 122-3, 141, 150
Herefordshrre 8, 9 1674 mall order 93 cunarure ree sweep
~ b r v l v ebelts 155, 227 ustng 181-7, 194, 197,2067 second hand 9 3 4 curved cutting edges 26-31
abrastve compound 227, 229,230, 215,2234 c w e d gouges see longbenr gouges
232 waterscones 212-16 c ~ i i r n g a n g l e129, 134-5, 136,
abrvne wheels 155, 160 benchstrops 171-3, 189.208 cannel 18, 75, 139, 144, 147, 173, 139, 181, 183, 185, 195,
abrs~ves151-2, 1534, 165. abmmves 172 184, 187-8, 195,220,233 232
212-13 care 173 altgnment 76, 195 curt~ngurcles with gauge 28-9
for benchstrops 171-3 dressrne
" 172-3 carbon steel 155 cutt~ngedge 122-3, 1 4 1 4
acanthus leaves 27 145 making 171-2 asse~lngshar~ness 149-52
allongee tools 75.34.35 grn 165 danger of averheaang 157
slumtntumoxtdde 155, 159, 172, powder 172 grtndrng 180
-.-
713 slipstones 169 hontng 193, 194, 197, 201,
Amertcan Falm Cutc~ngTools stones 151, 153, 161-2, 167, 204-5
ins
.-< 176, 187, 197,201.213 by mach~ne227,232
angle of presentatmn 152, 17S9, care ofscones 163, 168, 171, masntalnlng sharpness
181-2, 185, 189.206.232 2lil6,219-20, 223 209-10
- blades 31-3
angled care of tools 106-7.209-10 profiles 12-13. 14lL1, 177
snnealtns 157 carpenceis chisel 2'4, 129, curring technhnlque 23
apex see keel under V-tool bevgl 18, 75,;76, 1 9 3 4 , 210, 137-8
Arkansas stones 151, 153, 161, 219,227 carver pattern handles 60 D
176-7 angle 122, 128, 13&1, 137, carving bench 21 1 damp 107, 110
compared wlrh ocher scones 140, 149, 192, 196, 210, carving gouge, parts of 17 deep gouges re U-shaped gouges
213,215,217,222,224 232 carving technique 209 dens~tyof wood 131
flattenrng the bevel 208 bent rools 204-5 ceramli stones 161, 176,213, Derwang, Germany 81
gedes of 167-8 2224,226 den1 stone see dress~ngabrasive
homng ihe bevel 193, 1969, 'arc and maintenance 223 wheels
202.204-5 choice 223 dtamondscones 161, 167, 212,
208,229, 232 pros and cons 224 213 216-22.226
squar~ngrhe cuttlng edge 180, iuncr~onof 128-9 slipstones 223 care and maintenance
182,201 honing 147-52,182-7 rypes 222-3 219-20
arttfictal dtamonds 216 Inner and ourer 1 3 W using 2 2 3 4 chotce of 219
arrifictalstoner 155. 161, 162 multtple bevels of V-tool 31 Chinese rook 97, 102-3, 142 pros and cons 221
Asam, Egid Qulrln 121 rounded 129,134, 152, 183-5, chip carving 84 rettlng up
ash 62 187,2074,229 chisels 18, 24-6, 145, 192 sl~~stones 219
Ashley llrr backbent V-tool 105 rust on 95 sharpening 179, 181, 182-4, rypea 21618
Ashley lles palm tools 105 secondary 129, 136, 149, 152, 189, 193 using 220
Airurnpaon (Aaam) 121 210 widrh 42 d~ggrnmgm 160,229,232
aavmmetrical blades 74-5 single \,. double 24-5, 129, see a h skew chlsels d~recrionof rocailon 178,228
1374 choice of (001s 9&1 DMT (Dtamond Machtn~ng
surface as guide to sharpness Cogelow, Fred 101 Tedinology) 217
back of gouge 18 150 Cogelow rools 101-2 Dockyard Model Company
backbenr gouges 3&7,4&1, blades 17, 18, 19-52 cold bending 74, 77, 78 104-5
89-90, 177 broken 96 carnbinarion srones 162. 212-14 dogleg chlsel 41
sharpenme 205-6 surfaie finish 77 concave cuts 8&7 drawen 110
backeron, 32, 33 blueing 74, 157.228 convex curs 40.867.90 dresrtng abranve wheels 160
balancmng wheels on grmder bolster see shoulder cork lining for drawers 110 dreirtng benchscones 164-7,
155-6 boit 216 comer chisels see skew chisels 214-15,221-2,223
Banquet at Simon's hosting in 85-6 comm (in carving) 82, 143, drybenchgrlnders 1554, 158
(Rtemenschneidei) 3, 124 boxed seis 91 14h dummy mallet 64
hairwood 131 boxer for benchscones 164, 168, dust 159, 167,220, 2234,229,
beads 33. 40, 87 222 23&1
beech 62 boxwood 62, 131 masks nt 159 160, 167. 230
beli grmden 158, 167 Brisrol Design 15
bench dtsctpllne 111-13 Bronze Age di~sela9, 48 of macaroni cools 31 E
bench gr~nden 154-160.226 buffing wheels 156,210,221, rmporrance of rna~nra~nmg E-ayprian sratue 9
benchplates 217-18 226 146-7 see &o nosed edges electric drill 66
benchstones 95, 119, 133, 152, bullnosed ice nosed edges cost of tools 91,230 attachments 156, 181, 227
154, 156 176,21&ll, 225 Burghair, Hans 142 Ciarex wheels 229 elecritc tool safery n-nt
care of 1634, 168,214-15, burl see burr (on wood) crocus abraswe 171, 172 Elevanon of the Magdnlene
219-20.223 burnishing 72 cross sectLon of blade 10, 11, (Rtemenschne~der) 10, 23
ceramtc 2 2 2 4 burr (on curting edge) 170, 1617,24 emery paper and powder 77. 95,
d~amond216-22 1 7 7 4 , 186, 193, 202,204 Cruclfnon (Rlemenachnelder) 81 172
 W O O D C A R V I N G T O O L S . MATERIALS & E Q U I P M E N T

end ferrule 17. 18,63-5 grcndsrone 154 mallets 44, 63-4

even thtckness of meral75-6, 147, grit 162 maple 62
195 gradesof 162, 213. 216-17, medium gouges 92
evenness of sharpenrig 152 222-3 sharpening 1 8 7 4
exot~cwoods 131 grooves 84, 128, 145 medium-pod rools 35
eye protectton XI, 156, 159, 160, eraunders 38 miuotoolr 104
167, 179 grounding 76.83 inside ofyouge see mourh mild ireel 19
eye rools 27 gutta-percha 69 inspecting cools 92 miniature mvine- 93
Eze-Lap 218 internal I e e l e 63 msuse of tools 23,4551, 100
--
H Imn Age 48 111,209
F hand and w w r damage xi iron fermle 64 rouges 85-6
face of gougezee mouth hand drill 66 skew chis& 83
facets hand grmders 23,1545 J U-shaped gouges 87-8
on bevel 148, 179 handedness of skew ch~sels38, lambs chuck 67 modell~ngolsuriaces 85
on keel ofV-tool 199 84 Jang family I02 monocry~tallrr~rd~amundbench-
on work 85, 99, 124, 137 handle holes Japanese chisels 48 scones 21617
Falls Run Woodcarving Inc. 97 boring 6 5 4 mom 227.229
felt wheels 227, 229 faulty 79 K moildmgs 86
ferrules 14, 17,60, 62-5 handles 14, 17 keel see under Viool mouth of gouge 17, 18, 185,203,
fitrinp 65, 67-8 damaged 6 3 4 Kinchen Zier-Schnineisen 1 0 9 5 233
files 125, 127, 171, 215 differenriaring 54-5 knuckle gouger 38-9
hnishing work 84.88 erzonomic 97 KO& s h q m i q wheel 227
firmer chisels 25, 81-2,95, 137, extra-long 56 name punch- 72
142, 152,177, 194 faults 79 L naunal siones 161. 1 6 7 4
fishtail tools 34,35, 74, 92, 94, finishing 68. 72 lappmg places 167,215,217-18 Naylor, Rod 229
103. 141, 146, 147 firring 69-70 large gouger, sharpenmg 181 rnckel 220
chisels 75 for socker choels 103 lzge-scale scubrtxe 93 nicks on edge 150
gouges 93, 157, 177 improving bought handles larhe 66-7. 103 nooe 230
macaroni rools 33 51 learner 171-3,208 nosed edges 1 4 3 4
flat gouges 26, 29.81, 85, 92, washerr 44 nordied eilger 146
103, 228 laore 96 lenghnswe cmratureof shonbenr n o ~ c u l i t e167
sharpening 187 maktng 65-9, 103 cools 3&9 numerical deacnpt~onof tools
flat profiles 177 mass-produced 53-5 lenmh of rools 43, 58 11-14
flat relief 83 mushroom-shaped 43.99 blade 94
flat surfaces 81, 137 octagonal 57, 60, 66-7,99 handle 56, 58 0
flattening see dressing on old roois 94. 96 Lemcaming in Wood (Pye) 93 oak 52. 131
Flexcut canring tools 97-9, 101 removing 7&2 lertenng 81-2,88, 93 oil 95,21&11
flexible shaft 226 iepa~nng69 lighting 210 and paraffin mix 165
flexible-shaft machine 156, 181 shape 59-60 lignum rirae 132 for oilsrones 162, 163
flexible shanks 97-8 nze 58-9 limeivood 54, 131 oil stains 163
fluierom 32 rurned 67-9 ane light oilsrones 154, 161, 176, 193, 216,
tluter, 30,87,93, 147,204 uhy make your o m 5 3 4 223.224
flutes 30, 145 wood for 61-2 opening the mouth 170
'folk' style 98 hard woods 131,140 out,cannel 18
loot chrsel 41 hardenrng steel 21 outer bevel 17.140-1, 171, 187.
forg~ng20 hardwood and softwood 61, 131 201-2,205-6,227,231
fr~ctron 157 hearcwood 61 Imoleum-camg rools 43 ouwide of gouge see back
ironrbent tools 36-7 heat crearmeni 2&2,95, 157 l~nseedo ~ l72. 162 oversinding 156, 180,207
chfsels,sharpenmg 201 heel 18, 32, 135, 147-8, 149,183, London paitern handle 59 over-shaping 159,228
gouges 38, 43, 89 185, 1934,205 long-pod cook 35 overhearing 23.96, 156, 157-8,
V-cools 84 hkcloq- 62 long-rerm storage 110 159. 180
fru~rwood62 hlgh carbon steel 19
h~gh-rel~elcanmg 89 P
G high-speed steel 19-20,155 palm tools 97-8
Glxsronhury, Lake W a g e 48 hollow bevels 129, 1 3 3 4 , 179 paper wheel&229, 232
Gonzalei, Ray 99 hollow of souse see mouth " paraifin (kerosene) 77,162
G o t h ~ carving
r 38, 83, 89 hallows 6-K90 longirudinal section 10, 11, 15, pvallcl-cided gouges 94
gouges 18,26-31,95, 145, 156 honrng 154, 169, 176-7, 16-17,3341 parallel rangs 70
sharpening 1734, 182, 181-7 loss of remper 23 pan~ngrools see V tools
1 8 4 7 , 189-91, 192, by machtne 226-7 low-relief cawing 84 pa- of a carvmng cool 17-18
2014,220-1 chcsels 1 8 2 4 lorr-?prd gnndei 15&9 parma 72
width 42 gouges 1 8 9 7 lubricaring oil 162,2234 patcern-makeis handle 59
Green Man 1 han~ngwheels 227 pau m d m 62
gr~nden154, 211 hook (on V-cool) 198 M perrol (gasolmne) 163
gnndmg 2 3 4 , 9 5 , 17741, 193, h o o ~see end fermle macaroni cools 32. 177 Pfeierl 15
196,201,204 hornbeam 62 sharpening 200 o~ercedwork 89
gnnding belt 226 HSS see high-speed steel m a & y i n g glass 150, 210-11 pillar drill 66
gr~nd~ngwheel 133, 1 5 M , 171, mahogany 62.131,210 plne 131
176,226 I mail order 93 ptning 95
types of 155 Ilea, Ashley 99 mainraining shxpness 207-10 Plasoune 103
using 148,17741, 19311, improvised fermle 63 making fermles 65 plate glasr 165
196,201,205,207 in-cannel 18,206 making handles 63-9, 103 pod tools see spade took
-- INDEX

pollshlngstoncs 212.213. 214 shallow-bent see longbent tools spindle gauge 120 The Toolshop, Needham Marker
polyciyatalhne d~amondr216, shank 14, 17, 18,35,37,204 splayed roola 25.33.34 102
217-18 sharp sand 165 ch~aeL84 Tormek 156
power shalpenlng 119,219. sharpentn~1 1 6 2 3 3 goups 88 corn surface 144
225-33 a i m (41 sharpening 207 trenching rools see macaroni tools
pie-sharpened tools 121 2,130, maintaining 207-10 spoonbir gouges see shoirbent tools rurner's skew chtsel 68
210-11,225 seauencr 153-4. 161, 176-7 squareness of cutting edge 141-3,
prlmaiy bevel I29 sharpcningarea ZIO-~I,'ZIS, 196 u
protectrng edges 112-13 220.231 St Barbma (Riemenschne~der)54 U-shaped gouges 28-9,31, 139,
piorrcrrng tools 106-7 sharpening machines 119,226-8 stab marks 144 141, 143, 145, 177,209
protecrrve dothlng and foonuear ah.~~~ness rraning k ~ r92 sharpening 187, 204
x, dehned 127 =eel 74, 141 undercutring 83,89
prarecnve guards 155, 231 testme 128, 193, 194, 199, stone files 169 'upstde d o m ' use of gouge 41, 87,
PVA glue 72 stop see shoulder 89.90. 137-8, 141, 149,
232
uses of carving tools 80-90
. .
26, 91, 92 rrraight tools 24-6, 33-6 v
Sheikh-eLBekd 9 chisels 93, 141, 146, 147 V-cools (parrmne tools) 92-3, 177,
shipwright's chisel 48 gouges 1 7 , 4 3 , 8 5 4 , 141, 146, 214
tach short-pod tools 35 147, 177 apex see keel, below
for slipstones 171 shortbent tools 3 6 4 0 , 9 4 , 134 macaroni coola 33 correcishape 129, 135, 141,
for slipstiops 174 chisels 38. 83 parallel-sided tools 3 3 4 144-8
for tools 109-10 corner chlrels 8 3 4 skew chisels 82-3, 143 faa1f.s 75-6
ragged cuts 125,207 gouges 37, 43, 76, 89, 177 rapered tools 31-6 keel 31,32, 135, 148, 194, 198
esps 125, 127 sharpening 204 - - 165
snaiehtedee angle of 129. 196
correcring shape 199-200
kay Gonzaler hooked skew chtsel macaroni tools 33.38 snaighrening the cutting edge
99-100 skew chlsels 38, 92, 143 180, 182 sharpening 170, 174, 179,
recesses 38. 88-9, 147 V-tools 38 snaighmei. of cutting edge 192, 194-9
leeds 30, 33 shauliler 17, 18, 37, 62. 96 1434,227,232 types 31
reltef carvtng 3 1, 38 correct shape 46-7 srroppasre 171, 172, 211, 215. uses 84-5, 87
tepatrlng edges 177 funcaan 44 219,221 widrh 42
repet~c~> e stram tnlury x~ napp prop ria re sire 77 srropping 100, 118, 151, 176, 193 varnish 57, 72. 79
resur-bonded watersrunes 213 rounded face 7 7 4 199,202,206,208,221. veinen 30,87,92,93,204
reverse of eouee see back shoulderless tools 45, 63, 111 226,231 vice 69, 71, 156
Piemenschne~dei,Tilman 3, 10, fishtad gouges 17 chisels 189 violin-making 93
23,54,81, 124, 142 side chisel 41, 101 viueous bonded waterstones 213
rocking aciion 27.31, 142 silicon carbide 155, 159, 213 arrois 719, 1 5 3 4 , 161, 171-5,
Rod Naylor wheels 229 skew angle 193 211,219,224 W
Rohr, Germany 121 skew chisels 25-6,42,92, 102-3, Supenharp sysiem 229 walnur 131
141-2, 146-7.157, 177 awan-necked see iongbenr roois Wxhrta atones 167, 213, 222
sharpening 1 9 3 4 sweep 11,26-7.35, 75, 103, 143 warencones 161, 176,212-16
ioughlng gouge 121
rubber abmlve wheels 229,232 skewed hhtail chisels 142 187, 202
"--
iii
rust 48 95 107 219-20 skewed gauges 101, 141, 142 sycamore 62 care and malnrenance 214-15
slicing cur 83,124,142-3 pros and cans 215-16
slipstones 95, 119, 167, 169-71, T rerrlng up 215
S 186, 195-8,201-2,204, take-off chuck 226 s l ~ ~ s t a n e213-14
s
safety x-xr, 125-6, 156, 167 20E-7,210-11. 225 tallow 172-3 stairer kit 214
ben'hstrop 190-2 altering shape 171 r a q ferrule 62-3, 65 types 213
gr~ndcis1 5 9 4 0 care 171 tangs 17.37.45, 102 ustng 215
power sharpeners 228, 230 ceramic 223, 224 alignmenr 50, 78 wavy edges 146, 182, 199
salmon-bend cee longbenr coals diamond 219,220 broken 96 wedge-and-hail handle 59
sanding 72, 124. 125 trpes 169-70 correcr shape 5&1 wet-and-dry abras~vepaper 166,
tapwood 61 usmg 187-9 faulrs 52 215
saw blade (for flatten~ngbench water 212-14 iunction 47-9 wer bench grinden 155. 156, 158
stones) 165 slipstraps 171, 173-5, 190, 192, inappropriate size 79 wheelwrigh~ichisel 48
Sctence Museum, London 102. 203 offset 78 whetscone 154
147
.. us,ng 192 regrinding 96 whire line see line of light
scratches on bevel 150-2. 179-80, slurry (on wa~ersronea) 162, 163, mry 9 5 4 width of blade 10, 11, 15, 16-17,
184, 187, 197, 202, 221 213, 215 capered 49, 70 41-2
scratches on work 150, 177, 193, small tools. sharpening 41, 158, types 49 winding blade 74
207 217, 220,231 'tap and rwisr' merhod of handle wing parting cool 32
sculpture tools 56,64, 102, 169 sacketcd rools 25, 48, I02 htuni: 70 winged edges 143, 145
secondary bevel see bevel sodturn bicarbonate solutton 163 raper see splayed tools wire edge see bum (on curring
second hand tools 21-2,69,934 soft woods 131 Taylor, Henry 38. 101 edge)
selfligg~ng 133, 135, 137 softwood and hardwood 131 teak 62, 210 woodblock printing 43
'ser bur not sharpened' 121, 134, sowback see longbent tools temper 21. 94, 96 wood engraving 43
spade tools 34 rempeiature 157 wood sculprors 127
spark test 19, 20 cool marks as surface finish 81, woodturning 12&1
speed 121, 124 woodworking chisels 137
of grind~ngwlieels 157-8, 159 tool rolls 107-9 working against rhe p i n 101,
of homng wheels 228 todiesw 158, 179, 181, 231 124, 145
 TITLES AVAILABLE FROM

GMC PUBLICATIONS
MAGAZINES

BOOKS
For a full list of books distributed by GMC visit our
website: wwwgrncbooks.com and order online.
Alternatively, to obtain a complete catalague af all
subjects published, or to place an order, contact:

GMC Publications,
Castle Place, 166 High Street, Lewes,
East Sussex BN7 IXU, United Kingdom
Tel: 01273 488005 Fax: 01273 402866
E-mail: pubs@thegrncgroup.com
Website: www.gmcbooks.com
Orders by credit card are accepted
 rk or. - - subject. This new edition in two volurmz?&k&
revised and expanded, and with new colour photography
throughout, ensures that it will continue to be indispensable.

This first volume deals with the selection, sharpening and

-
maintenance of woodcawinn tools. TwE, sharp -~
. ednesare esenl
.. .

for effective cawing, and Chrk Pye's detailed inst@@& . . . @& . <.?;
, ..~-.~
~

clear i~~ustrations~~& how the r i-~ hresub

t can m@&&$djc:::*:;;
every time,.whether hand or powered me
Though the emphasis is on traditional chisek an
number of innovatory tools are also considered in detail.

Chris Pye has been a professional woodcarver for more than 25

years and writes extensively about the subject. His previous GMC
books are Cow~ng on Turning ( 1 995),Lettercorvingin Wood (1 997),
Relief Carving in Wood (1998) and Elements of Woodcarving