PRODUCT SPECIFICATION transmission and power

EthernetConnect™ and IP/Analog Fiber Accessories

POWER SUPPLIES, RACK CHASSIS WITH INTERNAL POWER SUPPLY

Product Offerings
• USRACK/EURACK: Rack Chassis with Internal 9 VDC, 6.5 A Power
Supply, 14 Slots
• FXTPS: 9 VDC, 2 A, Power Supply Provides Power to Stand-Alone
Units
• ECPS-12VDC-0.5A: 12 VDC, 0.5 A, Power Supply Provides Power to
Stand-Alone Units
• ECPS-12VDC-3A: 12 VDC, 3 A, Power Supply Provides Power to
Stand-Alone Units
USRACK/EURACK
• FXTPS-48V: 48 VDC, 1.36 A, Power Supply Provides Power Over
Ethernet (PoE) Power to Stand-Alone Units
• ECPS-48VDC-5A: 48 VDC, 5 A, Power Supply, DIN Rail Mount,
Ideally Suited for PoE Applications
• ECPS-48VDC-10A: 48 VDC, 10 A, Power Supply, DIN Rail Mount,
Ideally Suited for PoE Applications

FEXTPS/ECPS-12VDC-3A ECPS-12VDC-0.5A

The Rack Chassis with Internal Power Supply, 9 VDC, 12 VDC,

and 48 VDC Power Supply Products are accessories that support
the IP/analog fiber and EthernetConnect™ products. These
accessories provide a range of options to provide power to fiber
applications, power over copper (PoC) applications, and PoE
applications.
FEXTPS-48V
The 14-slot Rack Chassis allows for module installation in a
chassis that is rack mountable. The chassis contains an internal
9 VDC, 6.5 A power supply that provides power directly to all
modules installed in the chassis; no external power supply is
required. The power supply provides current limiting at each slot for
short circuit protection.

The 9 VDC, 12 VDC, and 48 VDC Power Supply Products provide

excellent voltage and current alternatives for powering stand-alone ECPS-48VDC-5A ECPS-48VDC-10A
IP/analog fiber and Ethernet modules. The 48 VDC, 5 A and 10 A
power supplies are ideally suited for PoE applications.

International Standards
Organization Registered Firm;
ISO 9001 Quality System

C3983 / NEW 3-10-14

TECHNICAL SPECIFICATIONS

RECOMMENDED POWER SUPPLIES AND HARDWARE

9 VDC POWER SUPPLY PRODUCT FEATURES 48 VDC POWER SUPPLY PRODUCT FEATURES
USRACK/EURACK RACK CHASSIS
FEXTPS-48V
• Output Voltage: 9 VDC
• Output Voltage: 48 VDC
• Output Current: 6.5 A
• Output Current: 1.36 A
• Input Voltage: 90 to 264 VAC
• Input Voltage: 100 to 240 VAC
• Provides Fourteen 1-Inch Slots
• Broad Input Voltage Range for EU and US Application
• Rack Mount and Power for 14 Modules
• Frequency Range of 50 to 60 Hz for US and EU Application
• Automatic Current Limiting at Each Module Slot
• For Use on Standalone PoE Models
(Not at the Power Supply Output)
• IEC Cord Included: US, UK, EU, or AUS
• Voltage Transient Protection on all Power and Signal Input/Output Lines
Provides Unconditional Protection ECPS-48VDC-5A
• All Modules Installed in the Chassis are Hot-Swappable • Output Voltage: 48 VDC
• 3 RU High • Output Current: 5 A
• IEC Cord Included: US, UK, EU, or AUS • AC Input Voltage: 85 to 264 VAC, 47 to 63 Hz
• Optional RACK1B Single-Width Blank Filler Panel Covers the Front of an • DC Input Voltage: 120 to 375 VDC
Empty Chassis Slot • Output Overvoltage Protection: <57 VDC
• Output Overcurrent Protection: >150% of Rated Load Current
FEXTPS
• Output Short Circuit Protection: Hiccup Mode, Non-Latching
• Output Voltage: 9 VDC
(Auto-Recovery When the Fault is Removed)
• Output Current: 2 A
• Power Factor: >0.96 at 115 VAC, >90 at 230 VAC
• Input Voltage: 100 to 240 VAC
• High Operating Efficiency: >90% at 115 VAC, >92% at 230 VAC
• Broad Input Voltage Range for EU and US Application
• Small Package for Limited Space Installations
• Frequency Range of 50 to 60 Hz for EU and US Application
• Mounts on 35 mm (1.4 in) DIN Rail in Accordance with EN60715
• Changeable Input Voltage Pin Head; US Pin Head Standard
• Natural Convection Cooling: No Fans Required
• Pin Heads Also Included for Europe, Australia, and UK
ECPS-48VDC-10A
12 VDC POWER SUPPLY PRODUCT FEATURES • Output Voltage: 48 VDC
ECPS-12VDC-0.5A • Output Current: 10 A
• Output Voltage: 12 VDC • AC Input Voltage: 85 to 264 VAC, 47 to 63 Hz
• Output Current: 0.5 A • DC Input Voltage: 120 to 375 VDC
• Input Voltage: 100 to 240 VAC • Output Overvoltage Protection: <57 VDC
• Broad Input Voltage Range for EU and US Application • Output Overcurrent Protection: >150% of Rated Load Current
• Frequency Range of 50 to 60 Hz for EU and US Application • Output Short Circuit Protection: Hiccup Mode, Non-Latching
• Changeable Input Voltage Pin Head; US Pin Head Standard (Auto-Recovery When the Fault is Removed)
• Pin Heads Also Included for Europe, Australia, and UK • Power Factor: >0.96 at 115 VAC, >90 at 230 VAC
• High Operating Efficiency: >91% at 115 VAC, >93% at 230 VAC
ECPS-12VDC-3A
• Small Package for Limited Space Installations
• Output Voltage: 12 VDC
• Mounts on 35 mm (1.4 in) DIN Rail in Accordance with EN60715
• Output Current: 3 A
• Natural Convection Cooling: No Fans Required
• Input Voltage: 100 to 240 VAC
• Broad Input Voltage Range for EU and US Application
• Frequency Range of 50 to 60 Hz for EU and US Application
• Changeable Input Voltage Pin Head; US Pin Head Standard
• Pin Heads Also Included for Europe, Australia, and UK
TECHNICAL SPECIFICATIONS

9 VDC Rack Power Supply Products 9 VDC Power Supply Product

MODELS MODEL
USRACK 9 VDC, 14-slot chassis, internal power supply FEXTPS 9 VDC switching power supply
with US AC power cord, 19-inch, 3 RU rack
mount ELECTRICAL
EURACK 9 VDC, 14-slot chassis, internal power supply
with UK, EU, or AUS AC power cord, 19-inch, Input Voltage Range 100 to 240 VAC
3 RU rack mount Input Frequency Range 50 to 60 Hz
Input Power Consumption <0.5 W (at no load)
ELECTRICAL Input Current 600 mA RMS maximum
Input Voltage 90 to 264 VAC at 70 W maximum Output Voltage 9 VDC
Output Voltage 9 VDC Output Load Range 2 A maximum
Accuracy ± 5% at 6.5 A at 75°C
Output Current 6.5 A MECHANICAL
Fusing 1.25 A slow-blow (rack power supply) plug-in Input Pins Includes input voltage pin heads for US/North
modules individually electronically fused; America, Europe, Australia, and UK
each power supply unit is individually fused. Note: Refer to the Product Features section
for pictorial descriptions.
MTBF >100,000 hours
Dimensions 7.4 x 4.4 x 3.5 cm
Power Indicator Red LED
(2.9" D x 1.7" W x 1.4" H)
AC Line Cord Detachable, IEC-connected; US, UK, EU, or
AUS power cords available Unit Weight 0.25 kg (0.55 lb)
Shipping Weight <0.45 kg (1 lb)
MECHANICAL
GENERAL
Dimensions 48.2 x 19 x 17.5 cm
(19.0" D x 7.5" W x 6.9" H) Operation Temperature 0° to 40°C (32° to 104°F)
Rack Slots 14 slots available, 1-inch slots Storage Temperature –10° to 70°C (14° to 158°F)
Unit Weight 2.27 kg (5 lb) Relative Humidity 20% to 80%, noncondensing
Shipping Weight <3 kg (6.61 lb)
CERTIFICATIONS/RATINGS
GENERAL • CE, Class A
• FCC, Class A
Operating Temp –40° to 75°C (–40° to 167°F) • UL/cUL Listed
Storage Temp –40° to 85°C (–40° to 185°F) • C-Tick
Relative Humidity 20% to 80%, noncondensing
Heat Generation 240 BTU

CERTIFICATIONS/RATINGS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
• C-Tick
• Meets NEMA TS-1/TS-2 Standards and the Caltrans Specification for
Traffic Signal Control Equipment

RECOMMENDED ACCESSORY
RACK1B Single-width blank filler panel covers the
front of an empty chassis slot

BLANK FILLER PANEL

TECHNICAL SPECIFICATIONS

12 VDC Power Supply Products 48 VDC Power Supply Products

MODELS MODEL
ECPS-12VDC-0.5A 12 VDC, 0.5 A switching power supply FEXTPS-48V 48 VDC switching power supply
ECPS-12VDC-3A 12 VDC, 3 A switching power supply
ELECTRICAL
ELECTRICAL Input Voltage Range 100 to 240 VAC
Input Voltage Range 100 to 240 VAC Input Frequency Range 50 to 60 Hz
Input Frequency Range 50 to 60 Hz Input Power Consumption <0.5 W (at no load)
Input Power Consumption <0.3 W (at no load) Input Current 1.4 A RMS maximum
Input Current Output Voltage 48 VDC
ECPS-12VDC-0.5A 0.3 A RMS maximum Output Load Range 1.36 A maximum
ECPS-12VDC-3A 1 A RMS maximum
Output Voltage 12 VDC MECHANICAL
Output Load Range Dimensions 11.5 x 5.3 x 3.8 cm
ECPS-12VDC-0.5A 0.5 A maximum (4.5" D x 2.1" W x 1.5" H)
ECPS-12VDC-3A 3 A maximum Unit Weight 0.32 kg (0.70 lb)
Shipping Weight <0.68 kg (1.50 lb)
MECHANICAL
Input Pins Includes input pin heads for US/North GENERAL
America, Europe, Australia, and UK Operation Temperature 0° to 40°C (32° to 104°F)
Note: Refer to the Product Features section Storage Temperature –20° to 80°C (–4° to 176°F)
for pictorial descriptions.
Relative Humidity 20% to 80%, noncondensing
Dimensions
ECPS-12VDC-0.5A 6.4 x 4.1 x 3.0 cm
(2.5" D x 1.6" W x 1.2" H)
CERTIFICATIONS/RATINGS
• CE, Class A
ECPS-12VDC-3A 7.4 x 4.4 x 3.5 cm • FCC, Class A
(2.9" D x 1.7" W x 1.4" H) • UL/cUL Listed
Unit Weight • C-Tick
ECPS-12VDC-0.5A 0.25 kg (0.55 lb)
ECPS-12VDC-3A 0.25 kg (0.55 lb
Shipping Weight
ECPS-12VDC-0.5A <0.45 kg (1 lb)
ECPS-12VDC-3A <0.45 kg (1 lb)

GENERAL
Operation Temperature 0° to 40°C (32° to 104°F)
Storage Temperature –10° to 70°C (–4° to 158°F)
Relative Humidity 20% to 80%, noncondensing

CERTIFICATIONS/RATINGS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
• C-Tick
TECHNICAL SPECIFICATIONS

48 VDC 5 A Power Supply Products

MODEL MECHANICAL
ECPS-48VDC-5A 48 VDC switching power supply, 240 W Cooling Natural convection: requires 5.0 cm (2.0 in)
free space above and below and lateral
ELECTRICAL distance of 2.0 cm (0.79 in) from other units to
Output ensure adequate cooling
Output Voltage Trim Range Cable Mount
Typical VDC Minimum 48 VDC Screw Terminal Blocks 12 to 20 AWG flexible or solid cable
Typical VDC Maximum 56 VDC Dimensions 12.1 x 8.5 x 12.4 cm
(4.8" D x 3.4" W x 4.9" H)
Typical Current 5A
Efficiency >90% at 115 VAC, >92% at 230 VAC Unit Weight 0.96 kg (2.12 lb)
Shipping Weight <1.75 kg (3.86 lb)
Line Regulation <0.5% typical
Load Regulation <1% typical
Output Voltage Tolerance ±1% (initial set point tolerance from factory)
GENERAL
Hold-Up Time >20 ms at 115 VAC and 230 VAC (100% load) Operating Temperature –25° to 80°C (–13° to 176°F)
Output Overvoltage Protection <57 VDC Power Derating
Output Short Circuit Protection Hiccup mode, non-latching Vertical Mounting >50°C, derate power by 2.5%/°C
(auto-recovery when the fault is removed) Horizontal Mounting >40°C, derate power by 2.5%/°C
Rated Overload Protection >150% of rated load current, hiccup mode, Storage Temperature –25° to 85°C (–13° to 185°F)
non-latching (auto-recovery) Relative Humidity <95%, noncondensing

Input CERTIFICATIONS/RATINGS
Rated Input Voltage Range • CE, Class B
AC 85 to 264 VAC • FCC, Class B
DC 120 to 375 VDC • UL/cUL Recognized
Rated Input Current at Vinput 115 VAC 230 VAC
2.5 A 1.3 A
Frequency Range 47 to 63 Hz
Maximum Inrush Current 115 VAC 230 VAC
<35 A <35 A
TECHNICAL SPECIFICATIONS

48 VDC 10 A Power Supply Products

MODEL MECHANICAL
ECPS-48VDC-10A 48 VDC switching power supply, 480 W Cooling Natural convection: requires 5.0 cm (2.0 in)
free space above and below and lateral
ELECTRICAL distance of 2.0 cm (0.79 in) from other units to
Output ensure adequate cooling
Output Voltage Trim Range Cable Mount
Typical VDC Minimum 48 VDC Screw Terminal Blocks 12 to 20 AWG flexible or solid cable
Typical VDC Maximum 56 VDC Dimensions 12.1 x 14.4 x 11.9 cm
(4.8" D x 5.7" W x 4.7" H)
Typical Current 10 A
Efficiency >91% at 115 VAC, >93% at 230 VAC Unit Weight 1.37 kg (3.02 lb)
Shipping Weight <2.20 kg (4.85 lb)
Line Regulation <0.5% typical
Load Regulation <1% typical
Output Voltage Tolerance ±1% (initial set point tolerance from factory)
GENERAL
Hold-Up Time >20 ms at 115 VAC and 230 VAC (100% load) Operating Temperature –25° to 75°C (–13° to 167°F)
Output Overvoltage Protection <57 VDC Power Derating
Output Short Circuit Protection Hiccup mode, non-latching Vertical Mounting Only >50°C, derate power by 2.5%/°C
(auto-recovery when the fault is removed) >70°C, derate power by 5%/°C
Rated Overload Protection >150% of rated load current, hiccup mode, Storage Temperature –25° to 85°C (–13° to 185°F)
non-latching (auto-recovery) Relative Humidity <95%, noncondensing
Input
Rated Input Voltage Range CERTIFICATIONS/RATINGS
AC 85 to 264 VAC • CE, Class B
DC 120 to 375 VDC • FCC, Class B
Rated Input Current at Vinput 115 VAC 230 VAC • UL/cUL Recognized
5A 3.0 A
Frequency Range 47 to 63 Hz
Maximum Inrush Current 115 VAC 230 VAC
<35 A <35 A

Pelco by Schneider Electric Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
3500 Pelco Way, Clovis, California 93612-5699 United States to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All other product names and
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
services are the property of their respective companies.
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 Product specifications and availability are subject to change without notice.
www.pelco.com www.pelco.com/community ©Copyright 2014, Pelco, Inc. All rights reserved.