INSPECTION & TESTING REQUIREMENTS REVISION: 12/22/2015 CODE NUMBER: PAGE:

SAUDI ARAMCO FORM-175 REPLACES: 12/16/2009 IR010800 1 of 3

SCOPE: PIPE: Beveled End, Seamless or Welded, Straight Seam, Stainless Steel Pipe

TEST AND INSPECTION PER: 01-SAMSS-046 and applicable ASTM standards

(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE

(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0010
0010
*** R X
Pre-Fabrication/Production Requirements
Raw Material Test Certificates and Report
Specification Details / Notes:
Per ASTM A-999 (including micrographs)

0020 H R X Pre Inspection Meeting Verify Company approval of manufacturer’s Inspection and Test
Plan

0030 R X Welding Procedure Specification (WPS) , Procedure Per 01-SAMSS-046

Qualification Records (PQR) and welding repair procedure

0040 R X Raw Material Verification Per paragraph 8.2 and 8.3 of 01-SAMSS-046 and applicable
ASTM std.

0050 R X Welder Qualification Records As applicable

0060 R X NDT Personnel and Procedure Verify valid personnel certification and procedures.

0020
0010
***
W X
In process inspection & test requirement
Workmanship, Components, and Dimensions
Specification Details / Notes:

0020 W X Compliance with P.O Description, Specifications, Supplier’s

Catalog Description, Certified Drawings, and Paint Specification

0030 Chemical and Mechanical Tests:

0040 W R X a),,Chemical Composition Per 01-SAMSS-046 and applicable ASTM std. (dual
certification, carbon content)

0050 W R X b),,Tensile Tests Per applicable ASTM std.

0060 W R X c),,Hardness Test Per 01-SAMSS-046

0070 W R X d),,Flattening Test Per applicable ASTM std.

0080 W R X e),,Guided Bend Test Per applicable ASTM std.

IR010800 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 12/22/2015 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 12/16/2009 IR010800 2 of 3
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0090 W R X f),,Corrosion Test Per 01-SAMSS-046 (ASTM A-262 on a lot basis)

0100 W R X g),,Metallographic Examination Per 01-SAMSS-046 and applicable ASTM std. (ferrite content /
microstructure analysis)

0110 W R X Heat Treatment Per 01-SAMSS-046 and applicable ASTM std. (Liquid
quenching required if ISO 15156 is stated in the PO)

0120 H R X Repair Welding Per 01-SAMSS-046

0130 H R X Hydrostatic Testing Per 01-SAMSS-046

0140 W X Non Destructive Testing Per 01-SAMSS-046(non-destructive electrical plus hydro per
ASTM A-999)

0150 R X Pickling and Passivation Per 01-SAMSS-046 and applicable ASTM std.

0160 W R X Positive Material Identification 01-SAMSS-046

0030
0010
***
H R X
Final inspection & test requirements
Visual and Dimensional Inspection
Specification Details / Notes:
As per 01-SAMSS-046 and applicable ASTM std.

0020 H R X Weld Seam As per 01-SAMSS-046

0030 W R X Marking Per 01-SAMSS-046 and applicable ASTM std.

0040 W R X PMI Per 01-SAMSS-046

0050 W X Handling, Packing and Transportation Per 01-SAMSS-046

0060 R X Mill Test Certificate Per 01-SAMSS-046 and applicable ASTM std.

0070 R X Certificate of compliance

IR010800 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 12/22/2015 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 12/16/2009 IR010800 3 of 3
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0080 R X Product test certificate

Notes:
(1) Refer detailed instruction sheet 175 - 000003 of Inspection and testing requirements for ideal use of this form.

End of IR010800
INSPECTION & TESTING REQUIREMENTS REVISION: 12/22/2015 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 10/17/2000 IR000175 1 of 2
SCOPE: General template for special inspection form

TEST AND INSPECTION PER: PO Specifications & Specifications As Noted Below.

(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE

(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0010
0010
*** R X
Pre-Fabrication/Production Requirements
Raw Material Test Report
Specification Details / Notes:

0020 R X Manufacturer Inspection and Test Plan (ITP) As applicable, shall be submitted for review and approval.

0030 R X Welding Procedure Specification (WPS) and Procedure As applicable

Qualification Records (PQR)

0040 R X Welder Qualification Records As applicable

0050 R X NDT Procedures and Personnel Qualification Records As applicable, verify personnel qualification and procedures.

0020
0010
***
W R X
In process inspection & test requirement
Workmanship, Components and Dimensions
Specification Details / Notes:
Per applicable standard and Purchase Order requirements.

0020 W R X Compliance with P.O Description, Specifications, Supplier’s Per applicable standard and Purchase Order requirements.
Catalog Description, Certified Drawings, and Paint Specification

0030 R X Nondestructive Testing Requirements Per applicable standard and Purchase Order requirements.

0040 H R X Hydrostatic test As applicable standard and Purchase Order requirements

0050 W R X Heat treatment As applicable standard and Purchase Order requirements

0060 W R X Chemical Analysis As applicable standard and Purchase Order requirements

0070 W R X PMI As applicable standard and Purchase Order requirements

0080 W R X Mechanical Test As applicable standard and Purchase Order requirements

0030 *** Final inspection & test requirements Specification Details / Notes:

IR000175 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 12/22/2015 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 10/17/2000 IR000175 2 of 2
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0010 H R X Visual and Dimensional Check Per applicable standard and Purchase Order requirements.

0020 H R X Marking, Packaging, and HandlingProduct identification, Per applicable standard and Purchase Order requirements.
traceability, Marking, Packaging, and Handling

0030 R X Certificate of compliance

0040 R X Product Test certificates

0040 *** Additional/Supplemental Requirements Specification Details / Notes:

Notes:
(1) Refer detailed instruction sheet 175 - 000003 of Inspection and testing requirements for ideal use of this form.

End of IR000175
INSPECTION & TESTING REQUIREMENTS REVISION: 12/22/2015 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 10/17/2000 IR000175 1 of 2
SCOPE: General template for special inspection form

TEST AND INSPECTION PER: PO Specifications & Specifications As Noted Below.

(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE

(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0010
0010
*** R X
Pre-Fabrication/Production Requirements
Raw Material Test Report
Specification Details / Notes:

0020 R X Manufacturer Inspection and Test Plan (ITP) As applicable, shall be submitted for review and approval.

0030 R X Welding Procedure Specification (WPS) and Procedure As applicable

Qualification Records (PQR)

0040 R X Welder Qualification Records As applicable

0050 R X NDT Procedures and Personnel Qualification Records As applicable, verify personnel qualification and procedures.

0020
0010
***
W R X
In process inspection & test requirement
Workmanship, Components and Dimensions
Specification Details / Notes:
Per applicable standard and Purchase Order requirements.

0020 W R X Compliance with P.O Description, Specifications, Supplier’s Per applicable standard and Purchase Order requirements.
Catalog Description, Certified Drawings, and Paint Specification

0030 R X Nondestructive Testing Requirements Per applicable standard and Purchase Order requirements.

0040 H R X Hydrostatic test As applicable standard and Purchase Order requirements

0050 W R X Heat treatment As applicable standard and Purchase Order requirements

0060 W R X Chemical Analysis As applicable standard and Purchase Order requirements

0070 W R X PMI As applicable standard and Purchase Order requirements

0080 W R X Mechanical Test As applicable standard and Purchase Order requirements

0030 *** Final inspection & test requirements Specification Details / Notes:

IR000175 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 12/22/2015 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 10/17/2000 IR000175 2 of 2
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0010 H R X Visual and Dimensional Check Per applicable standard and Purchase Order requirements.

0020 H R X Marking, Packaging, and HandlingProduct identification, Per applicable standard and Purchase Order requirements.
traceability, Marking, Packaging, and Handling

0030 R X Certificate of compliance

0040 R X Product Test certificates

0040 *** Additional/Supplemental Requirements Specification Details / Notes:

Notes:
(1) Refer detailed instruction sheet 175 - 000003 of Inspection and testing requirements for ideal use of this form.

End of IR000175