Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    Figure 5: Comparison of Elongation Flakiness Index For Different Kinds of Aggregate Samples

    Uploaded by

    dil afroza karim Lina
    The document contains 5 figures comparing elongation flakiness indexes for different aggregate samples, showing values ranging from 16.66% to 72%. It also shows the equipment used to determine elongation indexes, including a metal length gauge to measure standard lengths, samples of aggregates, and a mechanical sieve shaker to separate particles by size.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Figure 5: Comparison of Elongation Flakiness Index For Different Kinds of Aggregate Samples

    Uploaded by

    dil afroza karim Lina
    11 views4 pages
    The document contains 5 figures comparing elongation flakiness indexes for different aggregate samples, showing values ranging from 16.66% to 72%. It also shows the equipment used to determine elongation indexes, including a metal length gauge to measure standard lengths, samples of aggregates, and a mechanical sieve shaker to separate particles by size.

    Original Description:

    Dc

    Original Title

    Doc1

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains 5 figures comparing elongation flakiness indexes for different aggregate samples, showing values ranging from 16.66% to 72%. It also shows the equipment used to determine elongation indexes, including a metal length gauge to measure standard lengths, samples of aggregates, and a mechanical sieve shaker to separate particles by size.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    11 views4 pages

    Figure 5: Comparison of Elongation Flakiness Index For Different Kinds of Aggregate Samples

    Uploaded by

    dil afroza karim Lina
    The document contains 5 figures comparing elongation flakiness indexes for different aggregate samples, showing values ranging from 16.66% to 72%. It also shows the equipment used to determine elongation indexes, including a metal length gauge to measure standard lengths, samples of aggregates, and a mechanical sieve shaker to separate particles by size.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    You are on page 1of 4

    Figure 5 : Comparison of elongation flakiness index for different kinds of

    aggregate samples.

    Figure 5 shows the comparison diagram regarding elongation index in percentage


    for five different sample of aggregate as 29.31% , 16.66% , 18.51% , 38.93% &
    72 %respectively.
    Top View

    Side View

    Figure 3 : Metal Length Gauge

    Figure 3 represents the metal thickness gauge used for the determination of
    aggregates elongation index. A metal length gauge indicates the standard length
    for a specific material for the purpose of determining the elongation index of the
    particular material.
    Figure 2 : Aggregate Sample

    Figure 2 represents the aggregate sample used for determination of aggregate


    elongation index by group 1.
    Figure 4 : Mechanical Sieve Shaker

    Figure 4 represents the mechanical sieve shaker with BS test sieve , arranged in
    descending order as 50.0 mm, 37.5mm, 28mm , 20mm, 14mm, 10mm, 6.3mm
    respectively. Generally, typical sieve shaker separates particles by passing them
    through a series of chambers with mesh filters and agitating the sample in order
    to obtain complete separation.

    You might also like