Ecolutia - Proteus Fact Sheet PDF

Water Treatment Solutions
Proteus
Proteus
Series Fact Sheet
The Proteus Series, a range of Mobile Water Treatment Systems, available alone, in parallel
or in series to solve your water quality or supply issues. This range features the Proteus Solo,
a single vessel suitable for smaller applications and the full Proteus, a combination of four
vessels housed within a standard shipping container. Both of these options are delivered pre
loaded with the specified treatment media, ready to start working for you immediately and
hence avoiding any disruption as a result of preparing equipment on site.
The Proteus Series is integrated with high Part of a much larger range of Mobile customisation specific to your project.
levels of instrumentation and automation Water Treatment equipment from Common to the Proteus Series and
to guarantee the quality and volume of Ecolutia, the Proteus offers typical water throughout Ecolutia’s fleet, are the
water required. This is also supported by treatments such as: filtration, softening, industry leading high flow rates and
an Ecolutia Field Service Engineer (FSE) demineralisation, condensate polishing, large capacities.
who will operate and maintain the de-oxygenation and carbon absorption. The Proteus can be combined with
equipment for you. Multiple configurations allow for flexible both seawater and brackish water
Triton RO units to provide pre treated
water. It can also be configured as ion
exchange post treatment to produce
higher specification product water.
Both on and off site regeneration
options are available. With so many
treatment options, and exceptional
service, there are multiple applications
for the Ecolutia Proteus Series.
Proteus Solo
Water Treatment Solutions
Proteus
Typical configurations, applications and flow data are shown in the table below:
Filtration Demineralisation De-oxygenation

Proteus up to 175m /h 3 Proteus using ion exchange resin up to Proteus up to 80m3/h
Proteus Solo up to 35m3/h 280m /h 2 step demineralisation and,
3
with <5ppb dissolved oxygen.
• Activated filter media is used for 200m3/h mixed bed quality. Proteus Solo up to 40m3/h
reduction of Turbidity (NTU),
Suspendid Solids (TSS) and Silt
Proteus Solo using ion exchange resin with <5ppb dissolved oxygen.
up to up to 130m3/h • Results indicate this service to be
Density Index (SDI).
• ‘Regen – in-place’ skid for efficient invaluable for industries during high
• In-line coagulation dosing and on-site regeneration. pressure boiler start ups or restarts.
turbidity monitoring systems with
automated shut down features • In – line conductivity monitoring • Treats most feedwaters and produces
to ensure quality operation. systems with automated shut down greater flows than competing mobile
features to ensure quality operation. water treatment equipment.
Softening
Proteus up to 300m3/h Carbon absorption Condensate Polishing
with a product hardness of <1ppm. Proteus up to 175m3/h Proteus up to 280m3/h
Proteus Solo up to 130m3/h Proteus Solo up to 35m3/h Proteus Solo up to 130m3/h
with a product hardness of <1ppm. • Treats most feedwaters and produces • Saves discharge and make up
• Includes a separate brine skid for greater flows than competing mobile water costs.
onsite regeneration resulting in water treatment equipment. Flow
• Invaluable service for commissioning
reduced expenses from transport rates are dependent on contact times
of air cooled condensers.
and trailer/resin exchanges. required in the particular application.
• Hardness monitoring and

automated control ensure
efficient and reliable operation.
Some of the typical applications of the Proteus Series follow, but the list extends into many industry specific utilisations. Add also to this
list the possibility of configuring the Proteus, Proteus Solo or other Ecolutia Mobile Water Treatment Systems, in series, parallel or as
stand alone units and you have many design options for your project.
Proteus Series Typical Applications

• Emergency water requirement • Seasonal or peak water • Pre treatment to existing plant
• Plant start up and commissioning consumption changes feedwater or RO
• Planned or unplanned • Temporary change in • Environmental and
maintenance outages quality requirement reuse requirements
Proteus Key Data Proteus Solo Key Data

Max Operating Temp 50°C (122 °F) Max Operating Temp 50°C (122 °F)
Length 12.2m (40 ft) Length 3m (10 ft)
Width 2.5m (8 ft) Width 2m (6.7 ft)
Height 2.9m (9.6 ft) Height 2.5m (8.3 ft)
Shipping Weight 22,000 - 26,000 kg (~ 49,000 - 58,000 lbs) Shipping Weight 7,500 kg (~16,500 lbs)
Max Operating Weight ~ 38,500 kg (~ 85,000lbs) Max Operating Weight 8,500 kg (~ 18,700lbs)
Max Inlet Pressure 7 bar (100psi) Max Inlet Pressure 7 bar (100psi)
Inlet, Outlet and Waste Connector DN 150 PN 16 (6”) Inlet, Outlet and Waste Connector DN 150 PN 16 (6”)
Power Requirements 415V, 50 - 60Hz, 16A Power Requirements* 110 - 240V, 50 - 60Hz, 10A
* power only required with optional instrument package
Ecolutia operates 24-hours, 365 days a year around the world. With a superior fleet set up for swift deployment and a dedicated team
focused on meeting customer needs, Ecolutia can provide you with an immediate, cost effective and superior mobile solution for
your water treatment needs. Whether you are interested in a rapid response service to deal with critical issues or you are more likely to
deploy a short or long term solution, Ecolutia can provide you with the technology and the service that fits.
Speak to your sales representative or contact us at www.ecolutia.com to discuss your project’s exact requirements and how Ecolutia can
find the right service solution.
Ecolutia Services AG www.ecolutia.com

Ecolutia - Proteus Fact Sheet PDF

Uploaded by

Copyright:

Available Formats

Ecolutia - Proteus Fact Sheet PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ecolutia - Proteus Fact Sheet PDF

Uploaded by

Copyright:

Available Formats

Water Treatment Solutions

Filtration Demineralisation De-oxygenation

• Hardness monitoring and

Proteus Series Typical Applications

Proteus Key Data Proteus Solo Key Data

Ecolutia Services AG www.ecolutia.com

You might also like