PS-360C

Pneumatic Tire
Compactor

Cat® 3054C Turbocharged Diesel Engine

Gross Power 98 kW 130 hp
Maximum Operating Weight 25 000 kg 55,115 lb
Rolling Width 2.28 m 7' 6"
 Reliability and Versatility You Can Depend On
These machines are ideal for applications such as wear courses and binder courses as well as
compaction of natural soils and materials with lime or cement.

Engine Propel System Operator’s Station

✔ The PS-360C pneumatic compactor is The hydrostatic propel system The PS-360C provides a spacious and
powered by the 98 kW (130 hp) combines smooth starts and stops with comfortable working environment with
Caterpillar® 3054C turbocharged diesel plenty of torque. The “High Drive” controls, levers, switches and gauges
engine. The Cat 3054C engine meets concept does not use any chains. The positioned to maximize productivity.
U.S. EPA Tier 2 engine emission drive motors, secondary brake and The low profile of the water tank and
standards. The high torque, low rpm hoses are protected within the machine the sloped engine hood provide good
engine provides power and fuel frame. An oscillating front and rear visibility to the front and rear of the
efficiency. suspension design reduces bridging machine.
Page 4 over soft spots regardless of terrain. Page 5
Page 4

✔ New feature

Performance and reliability you can depend on.

The new PS-360C Pneumatic Compactor establishes
new standards for productivity and reliability
in the compaction industry. A durable
Cat engine, large ballast tank and the
world’s largest and most dedicated
dealer support system ensure the
PS-360C Pneumatic Compactor will
provide maximum utilization. The PS-360C
will achieve outstanding compaction results
regardless of the application with its proven suspension
design and flexible weight adjustment.

2
Ballasting Ground Contact Pressures Serviceability
The ballast compartments are Ground contact pressures are measured The engine compartment offers easy
positioned with a calculated balance of across the width of the tires. Changing access to the powertrain components.
wheel to weight ratio. Internal-frame the tire pressure or altering the ballast Routine maintenance points are
baffles help prevent surges when water capacity will allow the PS-360C to grouped together and easily accessible
ballast is used. meet specific job requirements. though the large engine compartment
Page 5 Page 9, 10, 11 opening. Two gas struts assist in raising
the engine hood. Visual indicators for
the radiator coolant, hydraulic oil tank
level and air cleaner provide easy
verification.
✔ Standard 500 hour oil service interval
reduces maintenance costs.
Page 6

✔ Caterpillar Product Link System (CPLS)

The PS-360C includes an electrical
harness to accept the optional
Caterpillar Product Link System. The
Caterpillar Product Link System
simplifies machine tracking by
providing location and hour updates to
assist in scheduling of routine service.
Consult your Caterpillar Dealer for
purchasing information regarding which
Product Link version fits your needs.

3
Caterpillar 3054C Turbocharged Engine
High-tech four cylinder engine provides outstanding performance and fuel economy.

Turbocharged engine for top

performance and efficiency, even at
high altitude with no derating required
up to 2134 m (7,000 ft).
Direct injection fuel system provides
individually metered high-pressure
injection of fuel for maximum
efficiency.
High displacement to power ratio
ensures long life and exceptional
reliability.
Engine oil cooler maintains the
integrity of the oil to provide a cool
operating engine.
Dual fuel filters and a water separator
provide superior protection for the
injection system.
Glow-Plug ignition assists in cold
weather starting.

Propel System
The “High Drive System” combines smooth starts and stops with plenty of torque.

Hydrostatic transmission provides

R
smooth direction and speed control, no
chains are used.
Hydraulic motors, secondary brakes,
and drive lines are positioned high
inside the machine frame, limiting
contamination and damage.
Remote drive-train flushing system
supplies cool hydraulic oil to the brakes
and axles to provide extended
drive-train life.
Two-speed throttle switch provides
job-site versatility to suit working
conditions.

4
Operator’s Station
Ergonomic design for maximum operator productivity while offering unmatched comfort.

Spacious and comfortable working

environment with controls, levers,
switches and gauges positioned to
maximize productivity.
Durable suspension seat (optional) or
non-suspension seat offers day-long
comfort.
Gauges and controls move with the
operator console and seat for easy
operation.
Instrument panel includes indicators for
hour meter, transmission oil
temperature, engine coolant
temperature, engine oil pressure and
fuel level.
Multi-position operator station
(optional) slides into three different
positions and the seat pivots 30˚ in
either direction to provide maximum
visibility.

Ballast Compartment
Ballast options allow the machine to be tailored to specific weight capacities.

Maximum operating weight of

25 000 kg (55,115 lb) provides
versatility for thick lifts.

Ballast compartments accommodate

water, sand or steel in order to provide
varying weight capacities.

Integrated baffles prevent surges when

water ballasted.

Large cover plates on the operator’s

R

platform provide fill points for sand or

steel. The water fill port can be
accessed from ground level.

Bolt-on side cover allows quick

PS
-36
0C removal of sand or steel ballast. Water
ballast can be emptied through a drain
valve located on the chamber.

5
Serviceability
Less time on maintenance means more time on the job.

Routine maintenance points are

grouped in the engine compartment.
Ground level servicing simplifies
maintenance.
Visual restriction indicators for the
hydraulic oil filter and air filter.
Simplified access to the power-train
through the engine hood.
Color-coded and numbered wires
wrapped in nylon braid ensure system
integrity and help simplify
troubleshooting.
Grouped pressure taps with
quick-connect fittings simplify
troubleshooting.
Remote lubrication fittings decrease
maintenance time.

Optional Equipment
Standard and optional equipment may vary, contact your Caterpillar dealer for details.

Sliding Operator’s Station includes a Tire Wetting System allows solvent to Combined Ballast consists of four
multi-position control console that slides be sprayed on the tire surfaces. The internal ballast blocks weighing 4064 kg
into three locked positions: left, center system includes a 19 L (5 gal) emulsion (8,960 lb), two steel blocks weighing 446
and right. The operator’s seat also rotates tank, electric pump and spray nozzles for kg (982 lb) that are bolted to the front
30º in either direction. each tire. bumper, and two sets of of 51 mm (2")
thick steel ballast plates weighing 3084 kg
Suspension Seat is a mechanical seat Sun Canopy includes a sheet-metal
(6,600 lb). This option combined with wet
that has vertical height and weight structure that shields the operator’s
sand ballast provides an operating weight
adjustments with armrests. station from the sun. The structure is
of 25 022 kg (55,115 lb).
attached to the ROPS.
Speedometer is calibrated in kilometers
Spare Tire and Wheel includes a
per hour (km/h) and miles per hour Heat Retention Shields include a belt-
14/70 x 20, 20-ply tire and rim.
(mph) on an analog dial. type material that traps heat in order to
prevent asphalt from adhering to the tire
Roading Light Package includes
surfaces.
taillights and parking lights with
flashers.

6
Dimensions

A Operating length 4.87 m 16' F Height at steering wheel 2.53 m 8' 4"
B Compaction width 2.28 m 7' 6" G Height at ROPS 3.20 m 10' 6"
C Frame width 2.15 m 7' 1" Turning radius (outside) 6.7 m 22'
D Wheel base 3.65 m 12' Turning radius (inside) 3.47 m 11' 5"
E Ground clearance 252 mm 10" Tire overlap 58 mm 2.25"

R
G
F B C

R
E
D
A

Weights (approximate)
Operating weight includes lubricants, coolant, 80 kg (175 lb) operator, full fuel tank, and full hydraulic system.

Operating Weights
Condition Total Weight Weight Per Wheel
Shipping 8 500 kg 18,740 lb 1215 kg 2,675 lb
With maximum water ballast 13 500 kg 29,760 lb 1930 kg 4,250 lb
With maximum steel ballast 15 995 kg 35,265 lb 2285 kg 5,040 lb
With maximum wet sand ballast 18 500 kg 40,785 lb 2645 kg 5,830 lb
With water ballast and steel ballast 20 000 kg 44,090 lb 2855 kg 6,300 lb
With wet sand ballast and steel ballast 25 000 kg 55,115 lb 3570 kg 7,870 lb

PS-360C specifications 7
Engine Transmission Steering
Four-stroke cycle, four cylinder Cat Two speed hydrostatic propel system. A The automotive-type steering wheel and
3054C ATAAC turbocharged diesel hydrostatic pump provides oil to two column are integral with the operator’s
engine. This engine meets U.S. EPA hydrostatic motors that are mounted sliding platform and allow steering from
Tier 2 engine emission specifications. above the drive axles. The drive shafts multiple positions. Priority-demand
connect the motors to the axles. hydraulic power-assist steering system
Ratings at RPM kW hp A single propel lever located on the provides smooth, firm handling.
Gross power 2,200 98 130 control console provides smooth Each front wheel individually turns to
hydrostatic control of the infinitely produce true tracking through turns.
Ratings of Caterpillar machine engines variable speeds in forward and reverse.
are based on standard air conditions of Minimum turning radius:
25°C (77°F) and 99 kPa (29.32" Hg) dry Speeds (forward and reverse): Inside edge 3.47 m 11' 5"
barometer. Power is based on using 35° 1st 0 - 8 km/h 0 - 5 mph Outside edge 6.70 m 22'
API gravity fuel having an LHV of 2nd 0 - 18 km/h 0 - 11 mph
42,780 kJ,kg (18,390 Btu/lb) when used
at 30°C (86°F) [ref. a fuel density of
838.9 g/L (7.001 lb/U.S. gal)]. Net
power advertised is the power available
at the flywheel when the engine is Brakes Wheels and Tires
equipped with air cleaner, muffler and Primary brake features The size of the three front tires and four
alternator. No derating required up to ■ Closed-loop hydrostatic drive system rear tires are 14/70 x 20 20 ply. The tires
2134 m (7,000 ft). provides dynamic braking during provide 58 mm (2.25") of overlap. The
machine operation. rear tires extend 58 mm (2.25") beyond
The following ratings apply at 2,200 Secondary brake features the frame. Each tire is equipped with a
RPM when tested under the specified ■ The secondary brakes are cocoa mat. The cocoa mat keeps the tire
standard conditions for the specified spring-applied and hydraulically surface coated with water or emulsion in
standard: released. The wet, multiple disc brakes order to prevent asphalt or soil from
are actuated by a switch on the control adhering to them. The cocoa mats can be
Net Power kW hp console. They are also activated retracted and positioned above the tires
EEC80/1269 93 125 automatically if pressure is lost in the when they are not needed.
ISO 9249 93 125 brake circuit or when the engine is
SAE J1349 92 124 shut off.
Brake systems meet SAE J1472 practice and EN 500
requirement.
Dimensions
Bore 105 mm 4.12"
Stroke 127 mm 5"
Displacement 4.4 L 268 cu. in.

Electrical System Frame Instrumentation

The 24-volt electrical system includes The chassis is a rigid welded frame that The front control console includes the
two maintenance-free Cat batteries, supports the engine, transmission and start switch, alternator indicator light,
color-coded and numbered wiring sheet metal. The frame is designed to coolant temperature gauge, engine oil
wrapped in nylon braid. The system evenly distribute the machine weight pressure gauge, hydraulic oil temperature
includes a 55-amp alternator. between the front and rear axles. gauge and hour meter. The side console
Integrated baffle plates prevent surging includes the propel lever, speed selector
when using water ballast. switch, spray system controls, horn and
secondary brake switch.

8 PS-360C specifications
Ballast Considerations Water System Service Refill Capacities
and Ground Contact The pressurized water system is Liters U.S.
efficient and reliable. The system Gallons
Pressures includes stainless steel distribution bars Fuel Tank 200 52
The most common method of changing located over the front and rear tires and Engine Crankcase 7.3 1.9
ground contact pressure is to vary the retractable cocoa mats for each tire. Hydraulic Tank 90 23.7
tire pressure. Another means to change Cooling System 28 7.2
ground contact pressure is to alter the The pressurized system includes triple Differential 7.5 2
ballast. The ballast compartments are water filtration and a powerful Cat Tire Watering System 394 104
positioned with a calculated balance of water pump. Cat water pumps are Emulsion Tank 19 5
wheel to weight ratio. Internal-frame designed to provide long life.
baffles help prevent surges when water
ballasted. A polyethylene water tank is located at
the front of the machine on the
The ballast blocks provide a low center operator’s platform. A water level
of gravity, resulting in good stability. gauge is on the tank within easy sight of
The ballast blocks are positioned in the the operator.
bottom of the mainframe near the center
of the machine.

Average Ground Contact Pressures

14/70x20, 20-Ply Tires

20-Ply Tires
Tire Pressure kPa 241 310 379 448 517 586 655 724 758
psi 35 45 55 65 75 85 95 105 110
Average Wheel Load Ground Contact Pressures and Contact Areas
1540 kg (3,390 lb) GCP kPa 296 338 345 372 400 448 469 469 489
psi 43 49 50 54 58 65 68 68 71
CA cm2 509 446 437 405 377 336 322 322 308
in2 79 69 68 63 58 52 50 50 48
1930 kg (4,250 lb) GCP kPa 317 345 365 386 413 455 469 489 496
psi 46 50 53 56 60 66 68 71 72
CA cm2 596 548 517 490 457 415 403 386 381
in2 92 85 80 76 71 64 63 60 59
2505 kg (5,510 lb) GCP kPa 338 372 393 413 441 469 510 517 524
psi 49 54 57 60 64 68 74 75 76
CA cm2 725 658 624 592 555 523 480 474 468
in2 112 102 97 92 86 81 74 73 73
2865 kg (6,300 lb) GCP kPa 351 379 413 434 455 496 524 531 565
psi 51 55 60 63 66 72 76 77 82
CA cm2 797 739 677 645 616 564 535 528 496
in2 124 115 105 100 95 88 83 82 77
3575 kg (7,870 lb) GCP kPa 372 407 427 462 482 524 558 558 572
psi 54 59 62 67 70 76 81 81 83
CA cm2 940 860 819 758 725 668 627 627 612
in2 146 133 127 117 112 104 97 97 95
GCP—Ground Contact Pressure CA—Ground Contact Area

PS-360C specifications 9
Actual Ground Contact Pressures
Actual Ground Contact Pressures are measured across the width of the tire. The charts include wheel path overlap.

Tire Inflation
Pressures

345 kPa (50 psi)

483 kPa (70 psi)
621 kPa (90 psi)
758 kPa (110 psi)

0 0
10 69
Ground Contact

Ground Contact
20 138

Pressures (kPa)
Pressures (psi)

30 207
40 276
50 345
60 414
70 483
80 552
90 621
100 689
110 758
120 827
130 896
140 965
150 1034

1215 kg (2,675 lb) wheel load – Standard machine empty

0 0
10 69
Ground Contact

Ground Contact
20 138

Pressures (kPa)
Pressures (psi)

30 207
40 276
50 345
60 414
70 483
80 552
90 621
100 689
110 758
120 827
130 896
140 965
150 1034

1930 kg (4,250 lb) Wheel Load – Maximum water ballast only

0 0
10 69
Ground Contact

Ground Contact

20 138
Pressures (kPa)
Pressures (psi)

30 207
40 276
50 345
60 414
70 483
80 552
90 621
100 689
110 758
120 827
130 896
140 965
150 1034

2285 kg (5,040 lb) Wheel Load – Maximum steel ballast only

10
Actual Ground Contact Pressures
Actual Ground Contact Pressures are measured across the width of the tire. The charts include wheel path overlap.

Tire Inflation
Pressures

345 kPa (50 psi)

483 kPa (70 psi)
621 kPa (90 psi)
758 kPa (110 psi)

0 0
10 69
Ground Contact

Ground Contact
20 138

Pressures (kPa)
Pressures (psi)

30 207
40 276
50 345
60 414
70 483
80 552
90 621
100 689
110 758
120 827
130 896
140 965
150 1034

2645 kg (5,830 lb) Wheel Load – Maximum wet sand ballast only
0 0
10 69
Ground Contact

Ground Contact
20 138

Pressures (kPa)
Pressures (psi)

30 207
40 276
50 345
60 414
70 483
80 552
90 621
100 689
110 758
120 827
130 896
140 965
150 1034

2855 kg (6,300 lb) Wheel Load – Maximum water ballast and steel ballast
0 0
10 69
Ground Contact

Ground Contact

20 138
Pressures (kPa)
Pressures (psi)

30 207
40 276
50 345
60 414
70 483
80 552
90 621
100 689
110 758
120 827
130 896
140 965
150 1034

3570 kg (7,870 lb) Wheel Load – Maximum wet sand ballast and steel ballast

11
Caterpillar offers a comprehensive line of pneumatic tire compactors.
Contact your local Caterpillar dealer to learn more about the complete line of Caterpillar
Paving Products.

The PS-150C Pneumatic Compactor

Operating Weight
Standard Machine 4885 kg 10,775 lb
Maximum Ballast 12 940 kg 28,535 lb
Heavy Weight Option
Standard Machine 4955 kg 10,925 lb
Maximum Ballast 17 273 kg 38,000 lb
Rolling Width 1.74 m 5' 9"
Gross Power 75 kW 100 hp

The PS/PF-300C Pneumatic Compactors

Operating Weight
Standard Machine 14 000 kg 30,860 lb
Maximum Ballast 21 000 kg 46,200 lb
Added Weight Option
Standard Machine 16 100 kg 35,500 lb
Maximum Ballast 23 100 kg 50,820 lb
Rolling Width 1.90 m 6' 3"
Gross Power 75 kW 100 hp

The PS-360C Pneumatic Compactor

Operating Weight
Standard Machine 8500 kg 18,740 lb
Maximum Ballast 25 000 kg 55,115 lb
Rolling Width 2.28 m 7' 6"
Gross Power 98 kW 130 hp

© 2004 Caterpillar
All Rights Reserved.
www.CAT.com

Featured machines in photography may include optional equipment.

QEHQ1102 (9/04) Materials and specifications are subject to change without notice.