928Gz ®

Wheel Loader

Engine
Model Cat® 3056E DIT ATAAC
Rated Net Power* 107 kW 143 hp
Maximum Net Power* 115 kW 155 hp
Buckets
Bucket Capacities 2.0 m3 – 2.3 m3 2.6 yd3 – 3.0 yd3
Weights
Operating Weight 12 310 kg 27,140 lb
* SAE J1349
 928Gz Wheel Loader
Offering world class performance, value and reliability.

Caterpillar® Power Train Operator Station Hydraulic System

The 928Gz uses a Caterpillar power train ✔ The operator station is ergonomically Hydraulic system offers advanced
for reliable, long life. The Caterpillar designed to create a comfortable work load-sensing features, fast loading
3056E DIT ATAAC six-cylinder engine area. Easy-to-use machine controls and cycles, easy reconfiguration and
with Cat power shift transmission is a new gauge console reduce operator exceptional ride control. pg. 8
performance-matched to the torque fatigue and increase efficiency and
converter and axles for smoother productivity. pg. 6
performance and greater operator
comfort. pg. 4

Environmentally Responsible Design Complete Customer Support

✔ Quiet operation, low engine emissions, Caterpillar dealers offer unmatched
less fluid disposal and clean, easy customer support with excellent
servicing help you meet worldwide warranty programs and fast parts
regulations and protect the environment. availability, resulting in maximum
pg. 12 uptime and minimum repair costs.
pg. 13

The 928Gz delivers power and versatility

to meet a wide range of job applications.
This tough, dependable machine is designed
to help you work more productively
and profitably.

2
Caterpillar Buckets Serviceability Owning & Operating Costs
Caterpillar buckets feature rugged Perform daily maintenance with easy ✔ Extended service intervals, an advanced
construction, integral spill plates and ground-level access to all major service electronic warning system, lower fuel
replaceable heel wear plates. pg. 9 points. Gull-wing doors provide excellent consumption and faster cycle times save
engine access and a swing-out fan you time and money. pg. 11
simplifies radiator service. pg. 10

✔ New Feature

3
Caterpillar Power Train
Rugged, dependable Cat components deliver maximum rimpull to the ground and full power
to the loader hydraulics.

Cooling System. Engine and cooling

system are in separate compartments for
clean, quiet operation and easy service.
Air-to-Air After Cooling. Air-to-air after
cooling reduces engine emissions.
Electronic Control Module.
The Caterpillar engine control module
not only controls the timing needs of
the engine but also monitors critical
systems to maintain optimum performance
and provide engine protection.
Service Intervals. The recommended
engine oil change requirement is every
500 hours of operation.
Axles. Heavy-duty design features
strong gears and bearings for durable
performance. Oscillating rear axle
helps assure four-wheel ground contact
for optimum traction and stability.
Brakes. Oil-disc brakes are
adjustment-free and fully enclosed.
Optional Heavy-Duty Brakes. Optional
heavy-duty brakes provide additional
brake discs and axle oil cooler for
severe applications.
Duo-Cone® Seals. Duo-Cone Seals keep
oil in and contaminants out.
Caterpillar Engine. The six-cylinder Torque Rise. The engine features a Limited Slip Differentials. Optional
3056E Direct Injection Turbocharged 41% torque rise for increased power front and rear Limited Slip Differentials
(DIT) engine with Air-to-Air After during heavy-duty use. provide improved traction in poor or
Cooler (ATAAC) has a proven reputation uneven underfoot conditions.
Emission Standards. The 3056E DIT
for reliability, durability and performance.
ATAAC engine meets worldwide
Fuel injection is electronically controlled
emissions standards.
for precise timing.
Cylinders. Low cylinder pressure
rise and low peak pressure provide
outstanding reliability and durability.

4
Transmission. Rugged, field-proven
Caterpillar 4F/3R transmission uses
heavy-duty components for durable and
reliable operation. High-energy friction
materials allow for better heat tolerance
while thick reaction plates allow for better
heat dissipation. The transmission is
also designed for easy service and rebuild.
Electronic Clutch Pressure Control.
The Electronic Clutch Pressure Control
(ECPC) manages shift torque providing
exceptional smoothness.
Gears. High-contact ratio spur gears
are precision ground and heat treated
for quiet, durable operation.
Shifting Options. Operator can choose
manual shift or two autoshift modes
(full throttle or variable shift control).
Full throttle selection provides maximum
acceleration while variable selection
increases fuel economy and improves
operator comfort.

5
Operator Station
Ergonomic design emphasizes comfort, visibility and easy operation.

Cab. The ergonomic cab provides a Access/Egress. Access/egress is

comfortable work environment with through a two-door design. Both doors
large windows, spacious interior room, open fully and lock flush against the
generous storage areas and low interior cab. Steps leading up to the cab are
sound levels. wide and angled out for secure footing.
Windows. Large windows improve
visibility in all directions. The rear
window features a standard electric
defroster. Sliding glass is available as
an option on the doors.

Access/Egress

6
Visibility. Visibility to critical areas Steering System. The load-sensing,
such as the bucket have been optimized. closed-center steering system with
Lift arm spacing is wide and linkage flow amplification matches steering
geometry maximizes visibility response to a wide variety of applications.
throughout the production cycle. The adjustable steering console lifts
easily out of the way. Dual suspended
brake pedals function as a brake and a
transmission neutralizer so the operator
can maintain high engine rpm for full
hydraulic flow and fast cycle times.

Seat. The standard seat is available in

cloth or vinyl and with fully adjustable
Instrument Panel. Redesigned instrument fore/aft position, seatback angle,
panel is conveniently located with bottom cushion height, armrest angle
easy-to-read gauges and expanded and suspension stiffness. Other seat
warning/indicator and diagnostic options include:
functions.
• Cat Contour Seat, fabric, with
Electronic Engine Speed Control. adjustable backrest and lumbar
A specific engine rpm can be set and support.
maintained with a switch in the cab.
Low Effort Operation. Hydraulic joystick • Cat Contour Seat, fabric, electrically
controls provide ease of lift and tilt adjustable with air suspension.
functions. A single joystick is standard. Storage. Generous storage space includes
An integrated directional control switch a lockable compartment, coat hook and
on the joystick provides easy operation special molded compartments designed
and enhanced productivity. A two lever to hold a lunchbox/cooler, cup or can.
control is optional. A tool box is also provided.
Customize the Cab. The cab can be
customized with:
• 12V converter for powering
electronics such as cellular phones,
two-way radios and music systems
• Radio installation packages
• Sun visor for windshield
• Roll-down sun screen for rear window
• External mirror package
• Auxiliary lighting packages

7
Hydraulic System
Hydraulic system provides improved efficiency and greater control.

Joystick Control. Low effort, joystick

implement control improves efficiency
with simultaneous lift and tilt functions.
Tilt Cylinder. A large tilt cylinder
delivers exceptional backdrag
performance.
Hoses. Caterpillar XT™ hoses and
couplings provide rugged, reliable
performance with significantly reduced
risk of leaks and blown lines.
Dual Circuit Control Valve. The 928Gz
comes standard with a control valve for
lift and tilt functions. One additional
valve section can be added to the existing
ones for additional functions.
Ground Level Access. The control
valves feature convenient ground
level access for easy modifications
to the system.
Pumps. Separate steering and implement
pumps improve machine response.
Load-Sensing Steering. Load-sensing
steering provides low effort operator
control, making more power available
for rimpull, breakout and lift forces.
Pressure Taps. Standard pressure taps
allow quick diagnosis of the entire
hydraulic system.
Precise Control. Designed by Performance. Fast loader cycle
Caterpillar, the hydraulic system times result in greater productivity. Optional Ride Control System.
provides low-effort operation and The hydraulic system is matched to the The improved Ride Control System
superior control. power train for outstanding performance. provides a comfortable ride at all
speeds and improved hard bank digging.
Three modes are available: auto, on
and off.

8
Caterpillar Buckets
Caterpillar buckets are an integral part of a machine designed to optimize performance.

Choice of Buckets. Caterpillar offers a

variety of buckets to meet your specific
job requirements. Careful match of the
bucket design and machine operating
characteristics provide the best digging,
loading and carrying performance.
General Purpose Buckets. Caterpillar
general purpose buckets, available in
2.0 m3 (2.6 yd3) and 2.3 m3 (3.0 yd3)
capacities with bolt-on cutting edge,
and are suitable for most general
applications. Features include:
• Improved bucket design with longer
floor and a larger radius for easier
flow of material into the bucket
• Patented Two-Bolt Corner Guard
Cutting Edge System for superior
wear resistance, better stability and
a simple bolt-on system
• Built-in, replaceable heel wear
plates for extended bucket life
Ground Engaging Tools. Ground engaging
tools include hardened steel cutting
edges, choice of short or long teeth and
a variety of tooth adapters. These tools
optimize performance, improve load
retention and extend the useful life of
Caterpillar buckets.
Versatility. For expanded machine
versatility, factory installed quick couplers
and other special purpose buckets are
also available. Contact your Caterpillar
dealer for details.

9
Serviceability
Improved access and fewer maintenance requirements add up to unparalleled ease
of service.

S•O•SSM Ports. Scheduled Oil Sampling

ports are factory installed for improved
access to engine, transmission and
hydraulic oils. S•O•S ports make oil
sampling quicker, cleaner and provide
the best oil sample for analysis.
Oil Filters. Spin-on filters for engine oil,
transmission oil and hydraulic oil are
vertically mounted for easier servicing.
Self-Diagnostics. Self-diagnostic
transmission and data link allows quick
and easy troubleshooting by service
personnel. Service codes are easily
accessed through the gauge console.
Extended Life Coolant/Antifreeze.
Cat Extended Life Coolant/Antifreeze
allows extended operation (up to
6,000 hours) between changes.
Other Service Features. Other service
features include:
• Maintenance-free driveshaft
• Stationary radiator and coolant hoses
• Standard hydraulic oil cooler
• Adjustment-free brakes
• Adjustment-free engine fuel system
• Grouped grease fittings
Easy Access. Gull-wing engine enclosure Swing-out Cooling Fan. A swing-out
• Positive torque hose clamps
doors with gas struts lift for exceptional cooling fan allows quick, easy cleaning
access to filters and service points. and service of the radiator. The fan is • Braided, color coded and
Radiator and oil coolers are easily hydraulically driven and separate from numbered wiring
accessible for cleaning. the engine compartment for exceptional
low noise operation.
Simplified Routine Service. All service
points are accessible from the ground Optional Reversing Fan. Optional
level. Easily check radiator coolant, reversing capability of the fan cleans
hydraulic oil and transmission oil levels screens without interrupting machine
with sight gauges. operation.

10
Owning & Operating Costs
Cost saving features help improve your bottom line.

Low Fuel Consumption. The 3056E DIT

ATAAC engine features low fuel
consumption for more economical
operation.
Increased Power, Faster Cycle Times.
High horsepower and increased torque
rise results in more power and faster
cycle times, allowing the operator to
get more work done in a day.
Extended Service Intervals.
Service intervals have been extended
to reduce machine service time and
increase machine availability:
• 4,000 hour hydraulic oil change
(S•O•S sampling required)
• 1,000 hour hydraulic filter change
• 500 hour engine oil change
Smoother Transmission for Increased
Productivity. A smoother shifting
transmission provides a more comfortable
work environment, allowing the
operator to be more productive
throughout the entire work shift. Equipment Management Option. Machine Security System Option.
Caterpillar’s asset management or The Machine Security System (MSS)
Demand Fan. Demand fan changes equipment management system called inhibits unauthorized machine use by
speed to meet cooling requirements Product Link-World View, enables immobilizing vital electrical circuits.
and save fuel. dealers and their customers to track Critical machine circuits are inhibited
Engine Derate Feature. Auto Derate equipment for hours and location, and unless a valid key is used to start
monitors vital engine systems and will in some cases monitor machine health. the machine.
reduce the engine horsepower up to This easy-to-use system provides
50% to protect the engine. information flow between a machine
and the user through the internet based
Dealer StoreFront. This information
helps lower operating costs through
timely service/repairs and optimized
machine use.

11
Environmentally Responsible Design
Caterpillar machines not only help you build a better world, they help maintain and preserve
the fragile environment.

Quiet Operation. The engine cooling

system allows the engine to be fully
enclosed, allowing less engine noise
to escape. With the optional sound
suppression package, the 928Gz is
even quieter.
Ozone Protection. To help protect the
earth’s ozone layer, the air conditioning
unit uses only R-134a refrigerant
which does not contain harmful
chlorofluorocarbons (CFC’s).
Fewer Leaks and Spills. Engine oil,
transmission and hydraulic filters
are positioned vertically and are
easily removed without spillage.
The Cat 3056E is fitted with a Closed
Circuit Breather to eliminate valve
cover drips. Cat O-ring face seals,
XT hose and hydraulic cylinders are all
designed to help prevent fluid leaks that
can weaken the machine’s performance
and cause harm to the environment.
Rebuildable Components. All major
components are designed for
rebuildability.
Biodegradable Hydraulic Oil.
Caterpillar biodegradable hydraulic oil
can be used in the 928Gz, providing
an environmentally-sound alternative
Low Fuel Consumption. The 928Gz is a Low Exhaust Emissions. The Cat 3056E to mineral-based oils.
top performer in it’s size class. The result DIT ATAAC is a low emission engine
is more work done in a day, less fuel designed to meet current worldwide
consumed and minimal impact on the emission regulations and is Tier 2
environment. compliant.

12
Complete Customer Support
Caterpillar dealer services ensure a longer machine operating life with lower costs.

Selection. Make detailed comparisons of Maintenance. Choose from a wide Product Support. You will find nearly
machines before purchasing. What are range of maintenance services at the all parts at our dealer parts counter.
the job requirements? What production time of machine purchase. Repair option Cat dealers utilize a worldwide computer
is needed? What is the true cost of lost programs guarantee the cost of repairs network to find in-stock parts to minimize
production? Your Cat dealer can give up front. Diagnostic programs such machine downtime. Additionally,
you precise answers to these questions. as S•O•S Oil Analysis and Technical Caterpillar offers a line of genuine
Analysis help avoid unscheduled remanufactured components which
Purchase. Look at the total package.
repairs that can cost unnecessary time can help lower repair costs.
Consider the financing options available
and money.
through your Cat dealer as well as day- www.cat.com. For more complete
to-day operating costs. Dealer support Replacement. Repair, rebuild or information on Cat products, dealer
services can be included in the cost of replace? Your Cat dealer can help you services, and industry solutions, visit
the machine to yield lower equipment evaluate the cost involved to make the us on the web at www.cat.com.
owning and operating costs over the life right choice. Specializing in fast, accurate and
of the machine. up-to-date information, the Cat web site
delivers the information you need to
Operation. For the best operating
operate your business, 24-hours a day.
techniques to increase productivity
and your profit, turn to your Cat dealer
for the latest training literature and
knowledgeable staff.

13
Engine Engine Torque

Model Cat 3056E DIT ATAAC Net

Rated Net Power @ 2,300 rpm Gross

SAE J1349 107 kW 143 hp ft-lb N•m

ISO 9249 (1997) 108 kW 145 hp 443 600

EEC 80/1269 108 kW 145 hp

Engine Torque

Engine Torque
369 500

Max. Net Power @ 1,900 rpm 295 400

SAE J1349 115 kW 155 hp 221 300

ISO 9249 (1997) 117 kW 156 hp 148 200
EEC 80/1269 117 kW 156 hp 74 100
Bore 100 mm 3.94 in
Stroke 127 mm 5 in 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 rpm

Displacement 6L 366 in3 Engine Speed

• Net Power ratings are tested at the reference conditions
for the specified standard.
hp kw
• Net power shown is the power available at the flywheel
161 120
when the engine is equipped with alternator, air cleaner,

Engine Power

Engine Power
muffler and fan at minimum speed. 134 100

• No derating required up to 3000 m (9,843 ft) altitude. 107 80

Auto Derate protects engine, hydraulic and transmission 80 60

systems. 54 40

• When the fan is at maximum speed, Rated Net Power is 27 20

97 kW (130 hp) and Maximum Net Power is 109 kW (146 hp)
at the flywheel per the SAE reference conditions. 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 rpm

• The Caterpillar 3056E DIT ATAAC engine meets Tier 2 Engine Speed
off-highway emission regulations.
• Features:
- Electronically controlled rotary fuel pump
Weights
- Three-ring, controlled-expansion, lubricated pistons
- Gear-driven water and oil pumps Operating Weight 12 310 kg 27,140 lb
- One-piece cast iron cylinder heads with two valves • Specifications shown are for 928Gz with optional
per cylinder counterweight, standard lubricants, full fuel tank, cab with
- Fuel priming pump and fuel/water separator air conditioning, sliding glass, Cat Contour Seat, Limited Slip
- S•O•S sampling port for engine oil axles with dual disc rear, 4L-4V hydraulics, heavy duty
cooler, supplemental steering, ride control, radio, roading
- Replaceable dry liners fenders, reversing fan, back-up alarm, guards, 2.0 m3 (2.6 yd3)
- Cast aluminum valve cover bucket with bolt-on cutting edge, 80 kg (176 lb) operator and
- Radiator is easily accessed for cleaning 20.5-R25 radial (L3) XHA tires.

Buckets

Bucket Capacities 2.0 m3 – 2.3 m3

2.6 yd3 – 3.0 yd3

14 928Gz Wheel Loader specifications

Steering Loader Hydraulic System

Minimum turning radius (over tire) 5233 mm 206 in Output at 2,300 engine rpm 151.5 L/min 40.3 gal/min
Steering angle, each direction 40º and 6900 kPa (1,000 psi) with
Steering cylinders, two, bore 69.9 mm 2.75 in SAE 10W oil at 65° C (150° F)
Hydraulic output at 104 L/min 27 gal/min Hydraulic Cycle Time 10.1 Seconds
2,300 engine rpm and Pump flow – Implement pump 152 L/min 40.15 gal/min
6900 kPa (1,000 psi) Hydraulic cycle time:
Maximum working pressure 20 700 kPa 3,000 psi Raise 6.1 Seconds
• Fully hydraulic power steering. Dump 1.2 Seconds
Lower, empty, float down 2.8 Seconds
• Center-point frame articulation.
Total 10.1 Seconds
• Front and rear wheels track.
Relief valve setting 24 800 kPa 3,600 psi
• Separate variable displacement piston pump provides
Lift cylinders, double acting:
steering power at all engine and ground speeds.
Bore 120.6 mm 4.75 in
• Tilt steering console.
Stroke 685 mm 27 in
• High-impact rubber steering stops. Tilt cylinder, double acting:
• Secondary steering system meets ISO 5010 and roading Bore 127 mm 5 in
regulations in various countries. Stroke 550 mm 21.7 in
• Open-centered system.
• Fixed displacement vane-type implement pump.
• Low effort, hydraulic joystick controls.
• Electronic pilot shut-off switch disables implement functions
for added safety.
• Hydraulic couplings with O-ring face seals.
• Optional heavy-duty oil cooler.
• Ride Control system available to provide smoother ride with
less spillage from bucket during load & carry operations and
better hard bank capability.

Service Refill Capacities

Fuel tank 225 L 59.4 gal

Cooling system 42 L 11.1 gal
Crankcase 14 L 3.7 gal
Transmission 34.5 L 9.1 gal
Differentials and final drives:
Front 26 L 6.9 gal
Rear 25 L 6.6 gal
Hydraulic system (including tank) 125 L 33 gal
Hydraulic tank 70 L 18.5 gal

928Gz Wheel Loader specifications 15

Transmission Tires

Standard transmission Size 17.5-25PR (L-2)

maximum travel speeds: Tread Width 2427 mm 96 ft
Forward 1 7.9 kph 4.9 mph Choice of:
Forward 2 12.6 kph 7.8 mph
• 17.5-25, 12PR (L-2)
Forward 3 25.8 kph 16 mph
• 17.5-25, 12PR (L-3)
Forward 4 37.7 kph 23.4 mph
• 17.5-R25, radial (L-2)
Reverse 1 7.9 kph 4.9 mph
Reverse 2 12.6 kph 7.8 mph • 17.5-R25, radial (L-3)
Reverse 3 25.8 kph 16 mph • 17.5-R25, radial (L-2/L-3)
• Electronically-controlled Caterpillar countershaft • 20.5-25, 12PR (L-2)
transmission with full on-the-go directional and speed • 20.5-25, 12PR (L-3)
change capability. • 20.5-R25, radial (L-2)
• High-energy friction materials and thick reaction plates • 20.5-R25, radial (L-3)
for better tolerance of heat.
• 20.5-R25, radial (L-2/L-3)
• High-contact ratio spur gears are precision ground and
• 600/65 R25, radial (L-3)
heat treated for quiet, reliable operation.
• Other tire choices are available, contact your Cat Dealer
• Electronic autoshift is standard.
for details.
• Button on implement control lever allows downshifting
• In certain applications, the loader’s productive capabilities
on demand.
may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
• Computer controlled modulation provides smoother Caterpillar recommends that you consult a tire supplier
transitions. to evaluate all conditions before selecting a tire model.

Axles Brakes
Axle Oscillation 11º Features:
Features:
• Service brake:
• Fixed front, oscillating rear (±11°) allows rear movement - Inboard oil-immersed disc brakes on front and rear axles
of 384 mm (15 in)with 20.5 R25 tires. are standard.
• Caterpillar axle with fully-enclosed brakes and final drives. - Completely enclosed and sealed.
• Patented Duo-Cone Seals between axle and housing. - Adjustment-free.
• Limited Slip Differentials are optional on front, rear or - Separate circuits for front and rear.
both axles.
- Dual pedal braking system.
• Rear axle trunnion has remote lubrication fitting.
- Fully integrated with hydraulic system, no air
• Planetary final drives are lubricated from the main oil sump. system required.
• High contact ratio gearset reduces noise levels • Secondary brake:
during meshing.
- Indicator light alerts operator if brake pressure drops.
- Continually-charged nitrogen accumulators provide
emergency stopping power in case of engine power loss.
• Parking brake:
- Mechanical, shoe-type brake.
- Mounted on drive line for positive manual operation.
- Application of parking brake neutralizes the transmission.
• Optional heavy-duty brakes with integrated oil cooler.

16 928Gz Wheel Loader specifications

Cab Implement Controls

ROPS SAE J1040 MAY94, Features:

ISO 3471-1994
• Lift circuit:
FOPS SAE J/ISO 3449 APR98
Level II, ISO 3449 1992 - Four positions: raise, hold, lower and float.
Level II - Adjustable automatic kickout from horizontal to full lift.
• Caterpillar cab and Rollover Protective Structure (ROPS) • Tilt circuit:
are standard in North America and Europe. - Three positions: tilt back, hold and dump.
• When properly installed and maintained, the cab offered by - Adjustable automatic bucket positioner to desired
Caterpillar, when tested with doors and windows closed as loading angle.
per work cycle procedures specified in ANSI/SAE J1166 - Does not require visual spotting.
May 90, results in operator sound exposure Leq (equivalent
sound pressure level) of 74 dB(A). • Controls:

• As manufactured by Caterpillar, this machine’s exterior - Choice of two low effort control systems: a joystick or
sound power level meets the criteria spelled out in the a two-lever control of lift and tilt circuits.
European Directives noted on the certificate of conformance - Optional third function hydraulic circuit available with
and the accompanying labeling. individual lever controls for remote hydraulic functions.
- Controls can be disabled for roading.

928Gz Wheel Loader specifications 17

Dimensions
All dimensions are approximate. Dimensions vary with bucket. Refer to Operating Specifications.

➤ 15

➤
➤

➤
➤
➤
➤
➤

24

➤
➤
➤ ➤ 16 13 23
➤
14
1 12
➤

11
2 10
➤
18 ➤
3

➤
➤ 25

➤
17

➤
➤

4
➤ ➤

➤
5 19
➤

➤
➤
➤ ➤ ➤ 20
7 ➤
8 ➤
➤
21
➤ ➤
9 ➤
22 ➤

➤ ➤
6

1 Height to top of ROPS/FOPS 3269 mm (10 ft 9 in)

2 Height to top of exhaust stack 3189 mm (10 ft 6 in)
3 Height to top of hood 2197 mm (7 ft 2 in)
4 Height to center of axle 685 mm (2 ft 3 in)
5 Ground clearance 408 mm (1 ft 4 in)
6 Overall length 7252 mm (23 ft 10 in)
7 Length – rear axle to bumper 1920 mm (6 ft 4 in)
8 Center line of front axle to hitch 1450 mm (4 ft 9 in)
9 Wheel base length 2900 mm (9 ft 6 in)
10 Dump clearance at maximum lift and 45° dump 2879 mm (9 ft 5 in)
11 Bucket clearance at maximum lift and level 3752 mm (12 ft 4 in)
12 Bucket pin height at maximum lift 3872 mm (12 ft 8 in)
13 Overall height – bucket raised 4971 mm (16 ft 4 in)
14 Reach at maximum lift and 45° dump 927 mm (3 ft 0 in)
15 Rack back angle at maximum lift 60°
16 Dump angle at maximum lift 45°
17 Rack back angle at ground 44°
18 Rack back angle at carry 47.8°
19 Carry height 449 mm (1 ft 6 in)
20 Digging depth 86 mm (3.4 in)
Dimensions listed are for 928Gz with optional counterweights, standard lubricants, full fuel tank, cab with A/C, sliding glass, Cat contour
seat, limited slip axles with dual disc rear, 4L4V hydraulics, heavy duty cooler, supplemental steering, roading fenders, reversing fan,
back-up alarm, guards, ride control, radio, 1.8 m3 (2.3 yd3) bucket with bolt-on cutting edge, 80 kg (176 lb) operator and 20.5 R25 radial
(L-3) XHA tires. Refer to Operating Specifications for bucket variations.

17.5-25 12PR (L-2) Tires 20.5 R25 (L-3) Tires 600/65 R25 (L-3) Tires
21 Width at tread center 1950 mm (6 ft 5 in) 1950 mm (6 ft 5 in) 1950 mm (6 ft 5 in)
22 Overall width over tires 2407 mm (7 ft 11 in) 2504 mm (8 ft 3 in) 2544 mm (8 ft 4 in)
23 Minimum turning radius over tires 5186 mm (17 ft 0 in) 5236 mm (17 ft 2 in) 5256 mm (17 ft 3 in)
24 Minimum turning radius over bucket – – 5781 mm (19 ft 0 in) – –
25 Steering angle – left/right 40° 40° 40°
Change in vertical dimension –65 mm (–2.7 in) no change no change –11 mm (–4.3 in)

18 928Gz Wheel Loader specifications

Operating Specifications
Pin-on
Buckets
General Purpose Buckets

With Bolt-On With Bolt-On With Bolt-On

Cutting Edge Teeth & Segments* Teeth*
Rated bucket capacity (§) m3 2.0 2.3 2.0 2.3 1.9 2.2
yd3 2.6 3.0 2.6 3.0 2.5 2.9
Struck capacity (§) m3 1.7 1.9 1.7 1.9 1.6 1.8
yd3 2.2 2.5 2.2 2.5 2.1 2.4
Bucket width mm 2549 2549 2549 2549 2549 2549
ft/in 8'4" 8'4" 8'4" 8'4" 8'4" 8'4"
10 Dump clearance at full mm 2879 2842 2766 2730 2766 2729
lift and 45° discharge (§) ft/in 9'5" 9'4" 9'1" 8'11" 9'1" 8'11"
14 Reach at full lift mm 927 964 1021 1058 1021 1058
and 45° discharge (§) ft/in 3'0" 3'2" 3'4" 3'6" 3'4" 3'6"
Reach at 45° discharge mm 1455 1474 1492 1509 1492 1509
and 2130 mm (7'0") ft/in 4'9" 4'10" 4'11" 4'11" 4'11" 4'11"
clearance (§)
Reach with lift arms mm 2253 2305 2399 2451 2399 2451
horizontal and ft/in 7'5" 7'7" 7'10" 8'0" 7'10" 8'0"
bucket level
20 Digging depth (§) mm 86 86 99 99 99 99
in 3.4" 3.4" 3.9" 3.9" 3.9" 3.9"
6 Overall length mm 7252 7304 7398 7450 7378 7430
ft/in 23'10" 24'0" 24'3" 24'5" 24'2" 24'5"
13 Overall height with bucket mm 4971 5070 4971 5070 4971 5070
at full raise (§) ft/in 16'3" 16'8" 16'4" 16'8" 16'4" 16'8"
24 Loader clearance radius mm 5781 5796 5845 5860 5845 5860
with bucket in ft/in 19'0" 19'0" 19'2" 19'3" 19'2" 19'3"
carry position
Static tipping load straight (§) kg 9859 9702 9690 9537 9778 9711
lb 21,735 21,389 21,362 21,025 21,556 21,409
Static tipping load kg 8587 8444 8417 8276 8508 8444
full 40° turn (§) lb 18,931 18,615 18,556 18,245 18,757 18,615
Breakout force (§) kg 11 723 11 095 11 590 10 961 12 604 11 880
lb 25,844 24,460 25,551 24,164 27,787 26,191
Operating weight kg 12 308 12 358 12 442 12 492 12 357 12 407
lb 27,135 27,245 27,431 27,541 27,243 27,353

Specifications shown are for 928Gz with optional counterweight, standard lubricants, full fuel tank, Cab with A/C, sliding glass,
Cat Contour Seat, Limited Slip axles with dual disc rear, 4L 4V hydraulics, heavy duty cooler, supplemental steering, roading fenders,
reversing fan, back-up alarm, guards, ride control, radio, 2.0 m3 (2.6 yd3) bucket with bolt-on cutting edge, 80 kg (176 lb) operator and
20.5 R25 radial (L-3) XHA tires.
* Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE standards specifies the cutting edge.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including
SAE Standards J732 JUN92 and J742 FEB85 governing loader ratings.
For operating specifications for hook-on buckets, please contact the factory.

928Gz Wheel Loader specifications 19

Typical Material Densities – Loose

kg/m3 lb/yd3 kg/m3 lb/yd3

Basalt 1960 3305 Gypsum
Bauxite, Kaolin 1420 2394 broken 1810 3052
Clay crushed 1600 2698
natural bed 1660 2799 Limestone
dry 1480 2495 broken 1540 2596
wet 1660 2799 crushed 1540 2596
Clay and gravel Sand
dry 1420 2394 dry, loose 1420 2394
wet 1540 2596 damp 1690 2849
Decomposed rock wet 1840 3102
75% rock, 25% earth 1960 3305 Sand and clay
50% rock, 50% earth 1720 2900 loose 1600 2698
25% rock, 75% earth 1570 2647 Sand and gravel
Earth dry 1720 2900
dry, packed 1510 2546 wet 2020 3416
wet, excavated 1600 2698 Sandstone 1510 2546
Granite Shale 1250 2107
broken 1660 2799 Slag
Gravel broken 1750 2950
pitrun 1930 3254 Stone
dry 1510 2546 crushed 1600 2698
dry, 6-50 mm (0.2-2") 1690 2849
wet, 6-50 mm (0.2-2") 2020 3406

Bucket Size Selector

Bucket Capacity Material Density

1400 1600 1800 2000 kg/m3
yd3 m3

2.5 1.9

2.6 2.0

2.9 2.2

3.0 2.3

2500 3000 3500 lb/yd3

115% 100% 95%

% = Bucket Fill Factor

20 928Gz Wheel Loader specifications

Supplemental Specifications
Change in Change in Articulated Static Tipping Load
Operating Weight with Hook-On Bucket 2.1 m3 (2.75 yd3)
kg lb kg lb
W/O Air conditioner –48 –106 –44 –97
Canopy, ROPS (less cab) –198 –437 –181 –399
W/O Optional counterweight, 175 kg/385 lb –290 –639 –483 –1065
W/O Guard, crankcase –17 –37 –22 –49
W/O Guard, power train –58 –128 –56 –123
W/O Ride Control System –41 –90 –28 –62
W/O Secondary steering –42 –93 –52 –115
Tires, 1-piece rims
17.5-25, 12PR (L-2) –661 –1457 –410 –904
17.5-25, 12PR (L-3) –582 –1283 –361 –796
17.5-25, radial (L-2/L-3) –519 –1144 –322 –710
17.5-25, radial (L-2) –614 –1354 –381 –840
17.5-25, radial (L-3) –458 –1010 –284 –626
Tires, 3-piece rims
17.5-25, 12PR (L-2) –529 –1166 –328 –723
17.5-25, 12PR (L-3) –457 –1008 –283 –624
17.5-25, radial (L-2/L-3) –413 –911 –256 –564
17.5-R25, radial (L-2) –489 –1078 –303 –668
17.5-R25, radial (L-3) –389 –858 –241 –531
20.5-25, 12PR (L-2) –240 –529 –149 –328
20.5-25, 12PR (L-3) –96 –212 –60 –132
20.5-25, radial (L-2/L-3) –52 –115 –33 –73
20.5 R25, radial (L-2) –172 –379 –107 –236
20.5 R25, radial (L-3) 0 0 0 0
600/65 R25, radial (L-3) Michelin +4 +9 +2 +4
600/65 R25, radial (L-3) Goodyear +216 +476 +134 +295

928Gz Wheel Loader specifications 21

Standard Equipment
Standard equipment may vary. Consult your Caterpillar dealer for details.

ELECTRICAL POWER TRAIN

Alternator, 80-amp Engine, Caterpillar 3056E DIT ATAAC
Alarm, back-up - Low emission diesel engine
Batteries, maintenance-free, 950 CCA, (2) - Turbocharged
Directional signals (front & rear) - After cooled
Starting and charging system, 24V - Closed Circuit Breather (CCB)
Halogen work lights (front & rear) - Electronically controlled engine
Ignition key start/stop switch Air cleaner, dry type
Roading lights Brakes, enclosed wet-disc full hydraulic
Starting aid, thermal Differentials, conventional (front/rear)
OPERATOR ENVIRONMENT Driveshaft, lubed for life
Cab, ROPS (sound suppressed and pressurized) Engine fuel priming pump
Gauges: Engine speed control
- Engine coolant temperature Fuel/water separator
- Hydraulic oil temperature Muffler
- Torque converter oil temperature Radiator, unit serviceable
- Fuel level gauge S•O•S oil sampling port, engine oil
- Speedometer S•O•S oil sampling port, transmission oil
- Digital tachometer Torque converter
- Digital hour meter/odometer Transmission, 4F/3R, autoshift, single lever control with
Warning indicators: F/N/R and kickdown button
- Primary steering malfunction Transmission neutralizer; operator programmable
- Electrical system voltage low HYDRAULICS
- Coolant temperature Hydraulic diagnostic connectors
- Engine oil pressure low Hydraulic oil cooler
- Parking brake applied Hydraulic control, 2-valve, 1-lever with F/N/R
- Brake charge pressure low Load-sensing steering system
- Transmission oil temperature S•O•S oil sampling port, hydraulic oil
- Transmission oil filter bypass OTHER STANDARD EQUIPMENT
- Hydraulic oil filter bypass Antenna, for radio
Adjustable tilt steering column Antifreeze/coolant, extended-life protects to –36° C (–33° F)
Coat hook Automatic bucket positioner/fork positioner
Ground level door release Brakes, secondary and parking
Heater/defroster Bucket positioner, automatic
Horn, steering wheel mounted (electric) Counterweight
Hydraulic control lever lockout Engine enclosure, lockable
Interior light Fenders, front
Interior and exterior auxiliary power sockets Hitch, recovery
Lighter Loader linkage, z-bar with sealed pins
Lunch box storage with cup holder Lift kickout, automatic
Pilot hydraulic implement controls Machine Security System ready
Rear window defroster, electric Product Link-World View ready
Rear view mirrors (2 inside) Remote grease lines
Seat, adjustable suspension, armrest (fabric or vinyl) Steering stops, cushioned
Seat belt, 75 mm (3 in), retractable Swing-out, hydraulically driven demand fan
Tinted safety glass Vandalism protection, lockable service points
Tool box Visual indicators:
Two door cab, fixed glass - Air cleaner service
Wet arm front & rear wiper/washer, front intermittent - Coolant level
- Hydraulic oil
- Transmission oil

22 928Gz Wheel Loader specifications

Optional Equipment
Optional equipment may vary. Consult your Caterpillar dealer for details.

Air conditioner (R-134a refrigerant) Mirrors, external (two)

Alternator, 95-amp Pallet forks, carriage
Antifreeze/coolant, extended-life, protects to –50° C (–58° F) Product Link
Beacon light, rotating, magnetic-mount Quick Coupler
Brakes, heavy duty Radio prep packages:
Buckets/ground engaging tools - 12V installation, includes speakers, cable, mounting
Canopy, ROPS bracket, hardware, converter and accessory plug.
Counterweight, additional 297 kg (655 lb) Radio not included.
Differential, Limited Slip, front axle and/or rear axle - AM/FM Radio
Differential, NoSpin, rear axle only (custom) - AM/FM Radio, CD
Dust bowl pre-cleaner Radiator, wide fin spacing, 5.5 fpi
Electrical accessories package (12V converter, accessory plug Ride Control System
outlet, wiring) Seats:
Extended lift arms available through Cat Work Tools - Cat Contour Seat, fabric, with adjustable backrest and
Fan, reversing lumbar support
Fenders, roading, rear - Cat Contour Seat, fabric, electrically adjustable with
Flood lights, auxiliary, cab-mounted air suspension
Guards: Sliding door windows (left and right)
- Crankcase Sound suppression package (custom)
- Front driveline Starting aid, engine coolant heater, 120V
- Power train Steering, secondary
- Waste guarding package Sun screen, rear
Hydraulic control, two lever (lift/tilt) Tires:
Hydraulic control, third valve - Bias ply, 17.5-25 and 20.5-25
Hydraulic oil cooler, heavy-duty - Radial, 17.5-R25, 20.5-R25 and 600/65 R25
Load check valves (dealer installed) Visor, sun (front)
Machine Security System
Material handling arm

928Gz Wheel Loader specifications 23

928Gz Wheel Loader

For more complete information on Cat products, dealer services,

and industry solutions, visit us on the web at www.cat.com

© 2006 Caterpillar
All Rights Reserved
Printed in U.S.A.

Materials and specifications are subject to change without notice.

Featured machines in photos may include additional equipment.
See your Caterpillar dealer for available options.

AEHQ5611-01 (1-06) CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,”
as well as corporate and product identity used herein, are
Replaces AEHQ5611 trademarks of Caterpillar and may not be used without permission.