Quality Assurance

S.No Item Test To Be Carried Out

Borrow Soil, Natural Soil MDD,OMC

1
Compacted Earth Density of Compacted Earth

Physical Test
Fineness
Normal Consistency
Setting Time(minute)
A)     Initial
B)      Final
2 Cement Soundness
a)      Le –Chat Expansion (mm)
b)      Autoclave Compressive Strength
a)      72+/-1 hr
b)      168+/-2 hr

Chemical Test

Deleterious Material, Organic Impurities,

Specific Gravity, Crushing Value, Abrasion
Value,Petrography
3 Coarse Aggregate Aggregate Impact Value,
Flakiness Index, Elongation Index, Water
Absorption
Sieve Analysis
Specific Gravity, Organic Impurities, Water
Absorption
4 Fine Aggregate
Sieve Analysis,
Silt Analysis

Physical Test

a)      Tensile Strength

b)      Re-bound Test
c)       Elongation Test
5 Steel d)      Proof Stress
e)      Bend Test
f)       Nominal Mass

Chemical Test
6 Cement Concrete Compressive Strength
Dimension Test,
7 Bricks Water Absorption, Compressive Strength,
Efflorescence
PH Value
Limits of Acidity
Limits of Alkality
8 Water
Percentage of Solids Chlorides Suspended matte
Inorganic solids
Organic solids
9 Anti Termite All Test as per IS - 8944
Relative Density,
PH,
10 Admixture
Chloride Content,
Dry Material Content
Permeability, Dimension Test, Hydrostatic
11 RCC Pipe Pressure Test,
Water Absorption
Compression, Extrusion,
12 Bitumen Impregnated Board
Bitumen Content, Water Absorption, Density

Compression, Extrusion,
13 Glazed Tiles/ Vitrified Tiles
Water Absorption, Density
Hardness,
14 Marble/Granite/Kota Stone Specific Gravity,
Water Absorption

Pre Polished Decorative Designer Resistance to Wear , Wet Transverse Strength,

15
Concrete Tiles
Water Absorption
Hardness,
16 Paver Block/Footpath Tiles
Crushing Strength, Water Absorption
Moisture,
17 Wood Physical Identification
,Density
Tensile Strength,
0.2% Proof Stress , Elongation,
18 Aluminum Work Thickness of Anodic Coating,
Dimensions,
Unit Weight
Dimension,

19 Gypsum Board for False Ceiling Transverse Strength, Mechanical & Chemical
Properties of Supporting Structure

Job Mix for WMM, OMC & MDD,

AIV,

20 Coarse Aggregate for WMM

 Flakiness & Elongation Index,
20 Coarse Aggregate for WMM
Atterberg's Limit
Gradation of Mix
Density of Compacted layer
Job Mix for GSB,
OMC & MDD,
AIV, Flakiness & Elongation Index, Atterberg's
Limit,
21 Coarse Aggregate for GSB
10% Fine Aggregate Value,
Soundness
Gradation of Mix
Density of Compacted layer

22 Kerb Stone Transverse Strength, Water Absorption

Aluminum Thickness, Compressive Strength,

23 ACP
Water Absorption
,Fire Resistance
Distribution of Allowable Defects,
Cluster of Defects, Thickness,
24 Glass Wrap,
Fragmentation Test,
Resistance to Shock Test
Tensile Strength,
25 Stainless Steel Yield Stress , Elongation,
Mass per Meter
Knife Test,
26 Ply Glue Adhesion Test
End Immersion Test
Dimension,
Mass per Meter,
Visual Test,
Uniformity of Zinc Coating,
27 GI Pipe
Adhesion Test, Elongation on Gauge Length,

Tensile Strength,
Mass on Zinc Coating,
Chemical Analysis
Dimension,
28 CI Pipe Coating Test, Hydrographic Test,
Brinell Hardness Test, Hammer Test
Dimension, Water Absorption, Hydrographic
Test,
29 SW Pipe
Resistance to Acid, Resistance to Alkali,
Crushing Strength
 Dimension
,Hydrostatic Pressure, Visual Appearance,
30 PVC Pipe Opacity,
Effect on Water, Reversion Test, Density,
Sulphated Ash
Dimension,
Hydrostatic Pressure, Visual Appearance,
31 CPVC Pipe
Reversion Test, Density,
Flattening Test
Dimension, Compression Test,
Impact Test,
32 HDPE Pipe
Bend Test,
Reversion Test
Dimension,
Water Inlet Area, Perforation Size Width
Perforation Size Length,
33 PVC Perforated & Corrugated Pipes
Impact Strength,
Visual Appearance,
Bend Test
Dimension of Block,
Block Density,
34 Concrete Block Compressive Strength,
Water Absorption
,Drying shrinkage
Quality Assurance Plan

Contractor Role/ Frequency of

Code of Testing PMC Role
Test

Per Source Review Test Report

IS - 2720 Per 250 Sqm for Road Work & Natural Soil 500 Review Test Report &
Sqm backfilling Randomly Witness

Submission of MTC per Source of Brand/Week No

Review of MTC & Test
IS - 4031
Report

Submission of MTC Once per Source of Brand

Once Per Source

Review Test Report &

IS - 2386
Witness
Once Per Month

50 cum Receiving Per Lot

Once Per Source

Review Test Report &
IS -2386
Witness
50 cum Receiving Per Lot

Submission of MTC Per Brand Review of MTC & Test

Report
8 mm -25 MT/ 1 Sample
10 mm -35MT/1 Sample
12 mm - 35 MT/ 1 Sample
IS -1608, IS - 1599 16 mm - 35 MT/ 1 Sample
20 mm - 45 MT/ 1 Sample
25 mm - 45 MT/1 Sample
28 mm - 45 MT/1 Sample
32 mm - 45 MT/1 Sample
Submission of MTC Once per Brand
 IS - 516 As IS - 456 Witness

Review Test Report

IS - 3495 Per Brand / Per 25000 Bricks
&Witness

IS - 456 Every 3 month

IS - 6313 Submission of MTC Review MTC

Review Test Report

IS - 9103 Submission of MTC & Once Per 5 MT &Witness

Review Test Report &

IS - 458 Submission of MTC per Lot per Diameter Randomly Witness Factory
Testing

IS - 10566 Once Per Source Review Test Report

Review Test Report &

IS -777/13756/13630 Submission of MTC , Once Per Source
Random Checking

IS - 1122/1124 Once Per Source per Brand Review Test Report &
Random Checking

IS -1237 Once per Source Review Test Report

As per relevant IS/ CPWD Per Brand / Per 10000 Review Test Report

IS - 3364/ CPWD Per Source per 10 cum Review Test Report

As per relevant IS/ CPWD Submission of MTC , Once Per Source Review MTC & Test Report

IS -2542 Submission of MTC , Once Per Source Review MTC & Test Report

Once per Source

Review Test Report &
IS - 2386/6241 BIS - 812
Witness
 Once per Source
Review Test Report &
IS - 2386/6241 BIS - 812
Witness
1 Test per 500 sqm
1 Test per 500 sqm

IS - 2386/6241 BIS - 812 Review Test Report &

Witness

Gradation of Mix
Density of Compacted layer

As per relevant IS/ CPWD Submission of MTC & Once Per 5000 nos Review MTC & Test Report

As per relevant IS/ CPWD Submission of MTC Review MTC

IS - 2835/2553 Submission of MTC , Once Per Source Review MTC & Test Report

IS - 1608 Submission of MTC , Once Per Source Review MTC & Test Report

IS - 4020 Submission of MTC , Once Per Source Review MTC & Test Report

IS -
1239/2629/2633/1608/674 Submission of MTC , Once Per Diameter 1000 Rmt Review MTC & Test Report
5/228

Submission of MTC , Once Per Diameter 1000

IS- 1500 Review MTC & Test Report
Rmt

IS - 4985 Submission of MTC , Once Per Diameter 1000 Rmt Review MTC & Test Report
 IS - 4985 Submission of MTC , Once Per Diameter 1000 Rmt Review MTC & Test Report

ASTM D 2846, IS - 12235 Submission of MTC , Once Per Diameter 1000 Rmt Review MTC & Test Report

Submission of MTC , Once Per Diameter 1000 Rmt Review MTC & Test Report

IS - 9271/13360 Submission of MTC , Once Per Diameter 1000 Rmt Review MTC & Test Report

IS - 2185
Code of
Confirmation

IS - 2720

IS - 1489

IS - 383

IS - 383

IS - 1786
 IS - 456

IS - 1077

IS - 456

IS - 8944

IS - 9103

IS - 458

IS - 1838

IS - 4457/15622/13712

IS -11130/3316

IS -1237

IS - 15638

IS - 1708

IS - 738/1285

IS - 2095

IRC/MORTH
 IRC/MORTH

IRC/MORTH

IS -5758

ASTM D- 638

As per relevant IS

IS - 1608

IS - 2202

IS -1239/4736

IS - 1500

IS - 12235/133660
ASTM D 2846, IS - 4985

ASTM D 2846, IS - 4985

IS - 14930

As per EIC