Technical Data Sheet— Logiclave™ LAB

Freestanding range of autoclaves available in standard cylindrical and rectangular chamber sizes from 100 to 300
litres capacity.

• Mounted on swivel castors for easy transportation and positioning

• Designed to fit through standard width doorways
• Hygienic stainless steel fascia panels throughout entire range
• Single and double entry variants available
• Logiclave™ control system
• High efficiency integral steam generator option
Design

Suitable for fully automatic operation up to 138°C / 2.2Bar,

the Logiclave™ LAB autoclave is based on the key
requirements of the following standards and references:
• PD5500
• BS EN285
• BS 2646
• BS 3970 Pt1
• BS EN 61010
• HTM 2010
• C14 NHS Model engineering specifications
• HSE Guidance Note PM73
In addition, the equipment complies fully with the
appropriate requirements of the Pressure Equipment
Regulations 1999 (SI 1999 No. 2001) and is CE marked
accordingly.

Typical Applications

• Porous / Fabrics
• Equipment & Utensils
• Empty Glassware
• Culture Media
• Plastic Discard
• Mixed Discard
• Fluid Discard

Control System

The Logiclave™ type controller is based on a rugged industrial type full colour touch screen display with all
necessary functionality to easily operate the autoclave. The screen with its intuitive large buttons and display
layout provides the means of easily opening and closing the door and selecting and starting process cycles.
During normal operation all critical process temperatures and pressures are displayed along with current stage
and elapsed times etc. Password protected advanced functions and features.

Installation Services Required

Persons responsible for selecting and purchasing a Logiclave™ LAB autoclave should consider the provision of
the following utilities and connections:

• Steam – From site supply or integral steam generator?

• Water – Softened water is recommended.
• Compressed Air – From site supply or on board compressor?
• Power Supply – Availability of suitably rated 3 Phase supply?
• Drainage Connection – Proximity of floor drain?
• Safety Valve Vents – Ideally piped to outside of the building.
• CAT5 Ethernet Network Access Point – Only required with remote data archiving option.

All mechanical services are to be located within 2 metres pipe run of the rear of the autoclave and terminated
with suitable hand operated isolation valves. Please contact our technical department for recommendations and
assistance with installation planning.

4 Bentley Court, Finedon Rd Ind Estate, Wellingborough, Northants, NN8 4BQ

Tel: 01933 270999 Fax: 0870 803 4760
Email: info@autoclave.uk.com Web: www.autoclave.uk.com

Data Sheet Issue: August 2013

1
Technical Specifications — Logiclave™ LAB with Rectangular Chambers

Model LAB150V LAB225V LAB300V

Design Code PD5500 Cat 3, BS2646, PED 97/23/EC Mod B1+F & G
Chamber Material 316L Stainless Steel
Jacket Material 316L Stainless Steel
Chamber Design Pressure 2.62 Bar / Full Vacuum
Jacket Design Pressure 2.62 Bar
Design Temp 140°C
Working Pressure 2.2 Bar / Full Vacuum
Working Temp 138°C
Dimensions
600x500x500mm 600x500x750mm 600x500x1000mm
Chamber Dimensions (HWD) (HWD) (HWD)
Nominal Chamber Capacity 150 Litres 225 Litres 300 Litres
External Dimensions (Single Entry) 1900x730x1350mm (HWD)
1900x730x1310mm
External Dimensions (Double Entry) N/A N/A (HWD)
Loading Height 875mm
Approx Dry Weight 650kg 700kg 750kg
Internal Water Tank Capacity 23 Litres
Typical Utility Requirements
Power Supply (External Steam) 20A 3PH,N+E 50Hz 400/230VAC
Power Supply (ISG) 63A 3PH,N+E 50Hz 400/230VAC
External Steam Connection (No ISG) 0.5" BSP
Steam Supply Pressure 4.0 - 5.0 Bar
Water Supply Connection 22mm O/D Copper
Water Supply Pressure 1.5 - 3.0 Bar <60CaCo3
Compressed Air Supply Connection 0.5" BSP
Compressed Air Supply Pressure 6.0 - 8.0 Bar
Drain Outlet 35mm O/D Copper
Drain Temp ≤90°C
Chamber Safety Valve Outlet 22mm O/D Copper
Jacket Safety Valve Outlet 22mm O/D Copper
Water Tank Overflow 28mm O/D Copper
Heat Gain ≈3Kw

Typical utility usage per cycle (including steam generation)

Water: 63.6Litres (Porous cycles) / 297Litres (Fluids Cycles)
Electricity: 10KwH

Note: Utility consumption will vary depending on the size and nature of the load. These figures are based on typical
loads with the equipment under normal operating conditions and are provided for indication only.

4 Bentley Court, Finedon Rd Ind Estate, Wellingborough, Northants, NN8 4BQ

Tel: 01933 270999 Fax: 0870 803 4760
Email: info@autoclave.uk.com Web: www.autoclave.uk.com

Data Sheet Issue: August 2013

2
Features — Logiclave™ LAB with Rectangular Chambers

Model LAB150V LAB225V LAB300V

External Steam Supply Yes
Integral Steam Generation Optional
Integral Air Compressor Optional
Double Door Option No No Yes
Controller Logiclave™ With Full Colour Touch Screen HMI
Data Printer Yes
Paperless Graphical Recorder Optional
Independent Chart Recorder Optional
Ethernet Connectivity Yes
Vacuum Assisted Air Removal Optional
Power Operated Vertical Door Yes
Pressure Gauges Yes
Stainless Steel Piping Yes
Stainless Steel Process Valves Yes
Stainless Steel Enclosure Yes
Emergency Stop / Door Interlocks Yes
Multi Program Yes
Data Archiving Yes
Vented Cooling Yes
Thermal Door Interlock Yes
Water Cooled Jacket Optional
CAT 3 Effluent Retention Optional
SPF Fascia (Bio-seal) N/A N/A Optional
Crevice Free Pipework Optional
Passivation (Chamber & Piping) Optional
Remote Data Archiving Optional
Exhaust Filtration Optional
RO Water Treatment Plant Optional
Polished Chamber Optional
Removable Side Panels Yes
Drain Condenser Unit Optional
Internal Shelves Maximum 4

4 Bentley Court, Finedon Rd Ind Estate, Wellingborough, Northants, NN8 4BQ

Tel: 01933 270999 Fax: 0870 803 4760
Email: info@autoclave.uk.com Web: www.autoclave.uk.com

Data Sheet Issue: August 2013

3
Technical Specifications — Logiclave™ LAB with Cylindrical Chambers

Model LAB100V LAB145V LAB200V

Design Code PD5500 Cat 3, BS2646, PED 97/23/EC Mod B1+F & G
Chamber Material 316L Stainless Steel
Jacket Material 316L Stainless Steel
Chamber Design Pressure 2.62 Bar / Full Vacuum
Jacket Design Pressure 2.62 Bar
Design Temp 140°C
Working Pressure 2.2 Bar / Full Vacuum
Working Temp 138°C
Dimensions
500mm Dia x 500mm 500mm Dia x 750mm 500mm Dia x 1000mm
Chamber Dimensions Deep Deep Deep
Nominal Chamber Capacity 100 Litres 145 Litres 200 Litres
External Dimensions (Single Entry) 1900x730x1350mm (HWD)
External Dimensions (Double Entry) N/A
Loading Height 875mm
Approx Dry Weight 500kg 550kg 600kg
Internal Water Tank Capacity 23 Litres
Typical Utility Requirements
Power Supply (External Steam) 20A 3PH,N+E 50Hz 400/230VAC
Power Supply (ISG) 63A 3PH,N+E 50Hz 400/230VAC
External Steam Connection (No ISG) 0.5" BSP
Steam Supply Pressure 4.0 - 5.0 Bar
Water Supply Connection 22mm O/D Copper
Water Supply Pressure 1.5 - 3.0 Bar <60CaCo3
Compressed Air Supply Connection 0.5" BSP
Compressed Air Supply Pressure 6.0 - 8.0 Bar
Drain Outlet 35mm O/D Copper
Drain Temp ≤90°C
Chamber Safety Valve Outlet 22mm O/D Copper
Jacket Safety Valve Outlet 22mm O/D Copper
Water Tank Overflow 28mm O/D Copper
Heat Gain ≈3Kw

Typical utility usage per cycle (including steam generation)

Water: 63.6Litres (Porous cycles) / 297Litres (Fluids Cycles)
Electricity: 10KwH

Note: Utility consumption will vary depending on the size and nature of the load. These figures are based on typical
loads with the equipment under normal operating conditions and are provided for indication only.

4 Bentley Court, Finedon Rd Ind Estate, Wellingborough, Northants, NN8 4BQ

Tel: 01933 270999 Fax: 0870 803 4760
Email: info@autoclave.uk.com Web: www.autoclave.uk.com

Data Sheet Issue: August 2013

4
Features — Logiclave™ LAB with Cylindrical Chambers

Model LAB100V LAB145V LAB200V

External Steam Supply Yes
Integral Steam Generation Optional
Integral Air Compressor Optional
Double Door Option No No No
Controller Logiclave™ With Full Colour Touch Screen HMI
Data Printer Yes
Paperless Graphical Recorder Optional
Independent Chart Recorder Optional
Ethernet Connectivity Yes
Vacuum Assisted Air Removal Optional
Power Operated Vertical Door Yes
Pressure Gauges Yes
Stainless Steel Piping Yes
Stainless Steel Process Valves Yes
Stainless Steel Enclosure Yes
Emergency Stop / Door Interlocks Yes
Multi Program Yes
Data Archiving Yes
Vented Cooling Yes
Thermal Door Interlock Yes
Water Cooled Jacket Optional
CAT 3 Effluent Retention Optional
SPF Fascia (Bio-seal) N/A N/A N/A
Crevice Free Pipework Optional
Passivation (Chamber & Piping) Optional
Remote Data Archiving Optional
Exhaust Filtration Optional
RO Water Treatment Plant Optional
Polished Chamber Optional
Removable Side Panels Yes
Drain Condenser Unit Optional
Internal Shelves Maximum 3

4 Bentley Court, Finedon Rd Ind Estate, Wellingborough, Northants, NN8 4BQ

Tel: 01933 270999 Fax: 0870 803 4760
Email: info@autoclave.uk.com Web: www.autoclave.uk.com

Data Sheet Issue: August 2013

5
Logiclave™ LAB - Typical Dimensions

FRONT VIEW LH SIDE VIEW REAR VIEW

Notes:
1. Fits through standard width doorway
2. All utility connections made to rear of
Logiclave™ LAB
3. Side panels removable for maintenance
access. Ensure adequate clearance for
panel removal.
4. Machine levelled in final position with
adjustable feet.
5. Weights and dimensions do not include all
options.

ISOMETRIC

Specifications and dimensions subject to change without notice

RH SIDE VIEW (COVERS REMOVED)

4 Bentley Court, Finedon Rd Ind Estate, Wellingborough, Northants, NN8 4BQ

Tel: 01933 270999 Fax: 0870 803 4760
Email: info@autoclave.uk.com Web: www.autoclave.uk.com

Data Sheet Issue: August 2013

6
Logiclave™ LAB – Ordering Information

Option Code Example

Model No. X Where X = Model No. e.g. LAB150V
Double Entry DE Yes / No
Polished Chamber POL Yes / No
Integral Steam Generator ISG Yes / No
Integral Air Compressor AC Yes / No
Paperless Graphical Recorder GR Yes / No
Independent Chart Recorder CH Yes / No
Vacuum Assisted Air Removal VAC Yes / No
Preinstalled Programs NP Where N = Number of preinstalled programs (1-6)
Water Cooled Jacket WAT Yes / No
CAT 3 Effluent Retention CAT Yes / No
SPF Fascia (Bio-seal) SPF Yes / No
Crevice Free Pipework CFP Yes / No
Remote Data Archiving RDA Yes / No
Exhaust Filtration EXH Yes / No
RO Water Treatment Plant RO Yes / No
Where N = Number of removable shelves (Max 3
No. of Shelves N Cylindrical or 4 Rectangular)
Drain Condenser Unit DCU Yes / No

Example - To order a 300 Litre Logiclave™ LAB autoclave with integral steam generator, a graphical recorder and
suitable for processing CAT3 contaminated waste the product code would be constructed as follows:

LAB300V+ISG+GR+VAC+CAT+EXH

4 Bentley Court, Finedon Rd Ind Estate, Wellingborough, Northants, NN8 4BQ

Tel: 01933 270999 Fax: 0870 803 4760
Email: info@autoclave.uk.com Web: www.autoclave.uk.com

Data Sheet Issue: August 2013

7
 ▪ Laboratory Autoclaves ▪ Steam Sterilizers ▪
▪ Washer Disinfectors ▪ Endoscope Washer Driers ▪

Sales
Service
Validation
Testing
Refurbishments
Accessories

4 Bentley Court, Finedon Rd Ind Estate, Wellingborough, Northants, NN8 4BQ

Tel: 01933 270999 Fax: 0870 803 4760
Email: info@autoclave.uk.com Web: www.autoclave.uk.com

Data Sheet Issue: August 2013

8