Hyundai Welding Co., LTD.: Low Alloy, Cellulosic Smaw For Pipe
Hyundai Welding Co., LTD.: Low Alloy, Cellulosic Smaw For Pipe
Hyundai Welding Co., LTD.: Low Alloy, Cellulosic Smaw For Pipe
01
S-7010.P1
LOW ALLOY, CELLULOSIC SMAW FOR PIPE
v Characteristics S-7010.P1 is a high cellulose type electrode for welding with direct
on Usage current. Vertical downward welding can be performed easily, It is suitable
for all position Welding of pipes, S-7010.P1 exhibits a deep penetration
and fast freezing.
Polarity : DC+
Chemical Composition
Consumable
C Si Mn P S Ni Cr Mo V
S-7010.P1 0.127 0.24 0.45 0.017 0.006 0.017 0.023 0.162 0.006
AWS Spec. ≤0.20 ≤0.60 ≤1.20 ≤0.03 ≤0.03 ≤1.0 ≤0.30 ≤0.50 ≤0.10
This information is provided solely for the purpose of confirming product conformance with applicable standards. The serviceability of a product or
structure utilizing this type of information is and must be the sole responsibility of the builder/user. Many variables beyond the control of HYUNDAI
WELDING CO., LTD. affect the results obtained in applying this type of information. These variables include, but are not limited to, welding procedure,
shielding gas, plate chemistry and temperature, weldment design, fabrication methods and service requirements.
S-7010.P1
Bead appearance
This information is provided solely for the purpose of confirming product conformance with applicable standards. The serviceability of a product or
structure utilizing this type of information is and must be the sole responsibility of the builder/user. Many variables beyond the control of HYUNDAI
WELDING CO., LTD. affect the results obtained in applying this type of information. These variables include, but are not limited to, welding procedure,
shielding gas, plate chemistry and temperature, weldment design, fabrication methods and service requirements.
S-7010.P1
Weldability
& Crater Crack Test
v Weldability
ASTM No crater
9(0.35) 140 22~23
A36 crack
This information is provided solely for the purpose of confirming product conformance with applicable standards. The serviceability of a product or
structure utilizing this type of information is and must be the sole responsibility of the builder/user. Many variables beyond the control of HYUNDAI
WELDING CO., LTD. affect the results obtained in applying this type of information. These variables include, but are not limited to, welding procedure,
shielding gas, plate chemistry and temperature, weldment design, fabrication methods and service requirements.
S-7010.P1
Size Available and recommended Current
Length
300 (12) 350 (14) 350 (14) 350 (14)
mm(in)
2.6(3/32)
E7010-P1 All E4910-P1
~ 5.0(3/16)
Notice
This information is provided solely for the purpose of confirming product conformance with applicable standards. The serviceability of a product or
structure utilizing this type of information is and must be the sole responsibility of the builder/user. Many variables beyond the control of HYUNDAI
WELDING CO., LTD. affect the results obtained in applying this type of information. These variables include, but are not limited to, welding procedure,
shielding gas, plate chemistry and temperature, weldment design, fabrication methods and service requirements.