See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/236121235

Digital Signal Processing

Book · January 1992

CITATIONS READS

2,327 21,256

2 authors:

J.G. Proakis Dimitris Manolakis

University of California, San Diego Massachusetts Institute of Technology
248 PUBLICATIONS   27,403 CITATIONS    166 PUBLICATIONS   10,450 CITATIONS   

SEE PROFILE SEE PROFILE

Some of the authors of this publication are also working on these related projects:

thermal infrared hyperspectral imaging. View project

LWIR HSI View project

All content following this page was uploaded by Dimitris Manolakis on 13 November 2015.

The user has requested enhancement of the downloaded file.

 Philadelphia University
Faculty of Engineering
Department of Communications & Electronics

Course Syllabus

Course Title: Digital Signal

Course code:610534 , 650534
Processing
Course prerequisite (s) and/or corequisite (s):
Course Level: Level 5
Engineering Analysis 3, Signal Analysis & Processing
Lecture Time: Credit hours: 3

Academic Staff
Specifics
Office Number Office
Name Rank E-mail Address
and Location Hours

Course module description:

This course aims to provide students with capabilities to
Signals and systems in discrete time
Discrete and fast Fourier transform
The z- transform arithmetic
Design techniques for digital filters
FIR,IIR, recursive and non-recursive filters.
effect of finite word length
applications.

Course module objectives:

At completing this course the student should be able to:
use Z-transform in solving deference equations. develop algorithms.
convert discrete time signal(sequence) to frequency domain using fast Fourier
transform(FFT)..
design digital filters.

Course/ module components

• Books (title , author (s), publisher, year of publication)

Title: Digital Signal Processing
Author: John G. Proakis & Dimitris G. Manolakis
Publisher: Prentice Hall, 4th edition, 2007
Teaching methods:
Lectures, discussion groups, tutorials, problem solving, debates, etc.
Lectures, discussion in class, tutorials, and problem solving.
Duration: 16 weeks, 48 hours in total
Lectures: 48 hours, 3 per week + two exams (two hours)

Learning outcomes:

A) Knowledge and understanding Skills:

Students will obtain knowledge and understanding of:
1) The structure of different communication systems.
2) The way of thinking and how to design.
3) The methods of developing the communication systems.
4) How to build, as hardware, different communication systems.
B) Intellectual Skills:
The students will acquire and develop the thinking skills that should enable
them to:
1) Apply appropriate techniques to the transmission systems that are currently
used for data, voice and video over LAN and WAN broadband networks.
2) Analyze and identify the specifications and tools to design typical process
control applications, applicable to data communications and its related
electronics systems.
C) Practical Skills:
Students will acquire and develop the practical skills that should allow them to:
1) Use appropriate numerical and mathematical skills to describe, analyze and
solve a problem in electronics or/and communication system.
2) Use various laboratory equipment as diagnostic tool to detect a faults and
identify a problem in electronics or/and communication system.
3) Analyze, design, evaluate, system behavior and test electronic or/and
communication system using simulation or computer-based tool (engineering
software tool).
4) Implement electronic circuits for communication system.
D) Practical and subject specific skills (Transferable Skills):
Students will acquire and develop the key transferable skills that will enable them
to:
1) Work with a wide variety of people.
2) Manage tasks, and solve problems.
3) Think logically and critically.

Assessment instruments

Allocation of Marks
Assessment Instruments Mark
First examination 15%
Second examination 15%
Final examination: 50 marks 50%
Quizzes, Projects 20%
Total 100%

* Make-up exams will be offered for valid reasons only with consent of the
Dean. Make-up exams may be different from regular exams in content
Documentation and Academic Honesty
Submit your home work covered with a sheet containing your name, number, course
title and number, and type and number of the home work (e.g. tutorial, assignment,
and project).

Any completed homework must be handed in to my office (room 821) by 13:00 on

the due date. After the deadline “zero” will be awarded. You must keep a duplicate
copy of your work because it may be needed while the original is being marked.

You should hand in with your assignments:

1- A printed listing of your test programs (if any).
2- A brief report to explain your findings.
3- Your solution of questions.

For the research report, you are required to write a report similar to a research paper. It
should include:
o Abstract: It describes the main synopsis of your paper.
o Introduction: It provides background information necessary to understand the
research and getting readers interested in your subject. The introduction is where
you put your problem in context and is likely where the bulk of your sources
will appear.
o Methods (Algorithms and Implementation): Describe your methods here.
Summarize the algorithms generally, highlight features relevant to your project,
and refer readers to your references for further details.
o Results and Discussion (Benchmarking and Analysis): This section is the
most important part of your paper. It is here that you demonstrate the work you
have accomplished on this project and explain its significance. The quality of
your analysis will impact your final grade more than any other component on
the paper. You should therefore plan to spend the bulk of your project time not
just gathering data, but determining what it ultimately means and deciding how
best to showcase these findings.
o Conclusion: The conclusion should give your reader the points to “take home”
from your paper. It should state clearly what your results demonstrate about the
problem you were tackling in the paper. It should also generalize your findings,
putting them into a useful context that can be built upon. All generalizations
should be supported by your data, however; the discussion should prove these
points, so that when the reader gets to the conclusion, the statements are logical
and seem self-evident.
o Bibliography: Refer to any reference that you used in your assignment.
Citations in the body of the paper should refer to a bibliography at the end of the
paper.

• Protection by Copyright
1. Coursework, laboratory exercises, reports, and essays submitted for assessment
must be your own work, unless in the case of group projects a joint effort is
expected and is indicated as such.
2. Use of quotations or data from the work of others is entirely acceptable, and is
often very valuable provided that the source of the quotation or data is given.
Failure to provide a source or put quotation marks around material that is taken
from elsewhere gives the appearance that the comments are ostensibly your own.
When quoting word-for-word from the work of another person quotation marks or
indenting (setting the quotation in from the margin) must be used and the source
of the quoted material must be acknowledged.
3. Sources of quotations used should be listed in full in a bibliography at the end of
your piece of work.
• Avoiding Plagiarism.
1. Unacknowledged direct copying from the work of another person, or the close
paraphrasing of somebody else's work, is called plagiarism and is a serious
offence, equated with cheating in examinations. This applies to copying both from
other students' work and from published sources such as books, reports or journal
articles.
2. Paraphrasing, when the original statement is still identifiable and has no
acknowledgement, is plagiarism. A close paraphrase of another person's work
must have an acknowledgement to the source. It is not acceptable for you to put
together unacknowledged passages from the same or from different sources
linking these together with a few words or sentences of your own and changing a
few words from the original text: this is regarded as over-dependence on other
sources, which is a form of plagiarism.
3. Direct quotations from an earlier piece of your own work, if not attributed,
suggest that your work is original, when in fact it is not. The direct copying of
one's own writings qualifies as plagiarism if the fact that the work has been or is
to be presented elsewhere is not acknowledged.
4. Plagiarism is a serious offence and will always result in imposition of a penalty. In
deciding upon the penalty the Department will take into account factors such as
the year of study, the extent and proportion of the work that has been plagiarized,
and the apparent intent of the student. The penalties that can be imposed range
from a minimum of a zero mark for the work (without allowing resubmission)
through caution to disciplinary measures (such as suspension or expulsion).

Course/module academic calendar

Basic and support Homework/reports and

week material to be their due dates
covered
(1) signals in discrete
time

(2) systems in discrete

time

(3) the z- transform Quiz1

arithmatic 9-3-2008
(4) the inverse
z- transform
arithmatic
(5) Difference equations
(6) Finite impulse
response(FIR)
(7) infinite impulse
response(IIR)
(8) System transfer Quiz1
Midterm examination function 13-4-2008
(9) Solution of
difference equation
(10) Frequency response
of analog filter
(11) Design of digital
filters
(12) Realization of
digital filter
(13) Discrete Fourier
 transform
(14) Fast Fourier Quiz1
transform 23-5-2008
(15) Applications
(16)
Final Examination

Expected workload:

On average students need to spend 2 hours of study and preparation for each 50-minute
lecture/tutorial.

Attendance policy:

Absence from lectures and/or tutorials shall not exceed 15%. Students who exceed the 15%
limit without a medical or emergency excuse acceptable to and approved by the Dean of the
relevant college/faculty shall not be allowed to take the final examination and shall receive
a mark of zero for the course. If the excuse is approved by the Dean, the student shall be
considered to have withdrawn from the course.

Course references

Books
1. Lonnie C. Ludman, “Fundamentals of Digital Signal Processing”t John Wiely & Sons
Ed.1985.

2. Roman Kuc. “Introduction to Digital Signal Processing” McGraw-Hall .1988.

3. Emmanual C. Ifeachor “Digital Signal Processing/ A practical Approach ” 2nd Edition

4. Prentice-Hall 2002

Websites

1- Digital signal processing

http://en.wikipedia.org/wiki/Digital_signal_processing

2-MatlabTutorials
http://www.mathworks.com/academia/student_center/tutorials/launchpad.html

View publication stats