KBV Expansion Anchor Product Description

KBV Expansion Anchor
Product Description • Anchor size is same as drill bit size

The KBV is a torque controlled expansion for easy installation. For temporary
anchor, which provides consistent applications anchors may be driven
performance for a wide range of into drilled holes after usage.
mechanical anchor applications. This • Mechanical expansion allows
anchor series is available in carbon steel immediate load application.
with zinc electroplated coating. The KBV
is available in diameters of 1/4 inch, Material Properties
3/8 inch, 1/2 inch, 5/8 inch, and 3/4 • Carbon Steel with Electroplated Zinc
inch. Applicable base materials include
• Carbon steel anchor components
lightweight concrete, normal-weight
plated in accordance with ASTM B633
concrete and grout-filled concrete
to a minimum thickness of 5 μm.
masonry.
• Nuts conform to the requirements of
Guide Specifications ASTM A563, Grade A, Hex.
Torque controlled expansion anchors
shall be KBV supplied by Hilti meeting • Washers meet the material
the description in Federal Specification requirements of ASTM F844.
A-A 1923A, Type 4. Anchors are • Expansion elements (wedges) are
manufactured to meet the following manufactured from carbon steel.
conditions:
Listings/Approvals
1. The carbon steel anchor body, nut
and washer have an electroplated zinc UL LLC
coating conforming to ASTM B633 to UL 203 Pipe Hanger Equipment for
a minimum thickness of 5 μm. Fire Protection Services (3/8 through
3/4)
2. The carbon steel nut and washer have
an electroplated zinc coating.
Product Features
• Through fixture installation and variable
lengths improve productivity and
accommodate various base plate
thicknesses.
Hilti, Inc. (USA) 1-800-879-8000 I www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I KBV Expansion Anchor Supplement 01/14 1
Figure 1 — KBV Specifications
nom
Table 1 — Installation Information

Nominal anchor diameter
Setting Information Symbol Units
1/4 3/8 1/2 5/8 3/4
ANSI drill to nominal dbit in. 1/4 3/8 1/2 5/8 3/4
Minimum nominal hnom in. 1-1/8 2 1-5/8 2-1/2 2-1/4 3-1/2 2-3/4 4 3-1/4 4-3/4
embedment (mm) (38) (51) (51) (64) (57) (89) (70) (102) (83) (121)
Min hole depth ho in. 1-3/8 2-1/4 2 2-7/8 2-3/4 4 3-3/8 4-5/8 4 5-1/2
(mm) (35) (57) (51) (73) (70) (102) (86) (117) (102) (140)
Installation torque Tinst ft-b 4 20 40 60 110
(Nm) (5) (27) (54) (81) (149)
Minimum fixture hole dn in. 5/16 7/6 9/16 11/16 13/16
diameter (mm) (7.9) (11.1) (14.3) (17.5) (20.6)
Minimum Base Material hmin in. 3-1/4 4 4 4 4-1/2 7 5-1/2 8 6 9-1/2
Thickness (mm) (83) (102) (102) (102) (114) (178) (140) (203) (152) (241)
Minimum Edge Distance cmin in. 2-1/4 3-3/8 4-1/2 5-5/8 6 3/4
(mm) (57) (86) (114) (143) (171)
Minimum Anchor Spacing smin in. 2-1/4 3-3/8 4-1/2 5-5/8 6-3/4
(mm) (57) (86) (114) (143) (171)
Design Tables
The load values contained in this section are Hilti allowable loads calculated from the results of testing in accordance with ACI
355.2 and applying an ASD reduction factor. The recommended loads for an anchor group can be calculated according to the
Allowable Stress Design (ASD) method outlined in Section 3.1.8 of the 2014 Hilti Anchor Fastening Technical Guide, Volume 2.
2 Hilti, Inc. (USA) 1-800-879-8000 I www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I KBV Expansion Anchor Supplement 01/14
Table 2 — Hilti KBV Carbon Steel Allowable Loads in Uncracked Concrete 1,2,3,4
Tension - Nrec Shear - Vrec
Anchor Diameter Nominal Embed.
f'c = 4000 psi f'c = 4000 psi
in. (mm) Depth in. (mm)
(27.6 MPa) lb (kN) (27.6 MPa) lb (kN)
1-1/8 405
1/4 (29) (1.8) 450
(6.4) 2 720 (2.0)
(51) (3.2)
1-5/8 940
3/8 (41) (4.2) 1,130
(9.5) 2-1/2 1,620 (5.0)
64) (7.2)
2-1/4 1,680
1/2 (57) (7.5) 1,900
(12.7) 3-1/2 2,850 (8.5)
(89) (12.7)
2-3/4 2,105 2,355
5/8 (70) (9.4) (10.5)
(15.9) 4 3,630 2,970
(102) (16.1) (13.2)
3-1/4 2,605
3/4 (83) 11.6) 5,105
(19.1) 4-3/4 4,985 (22.7)
(121) (22.2)
1 Anchors are tested in accordance with ACI 355.2 and failure mode is lesser of concrete, pullout, pryout, or steel failure.
2 Linear interpolation between embedment depths is not permitted.
3 Apply spacing and edge distance factors in Tables 3 to 7 as necessary.
4 Tabular values are for normal weight concrete only. For lightweight concrete multiply allowable loads by λa as follows:
For sand-lightweight, λa = 0.68. For all-lightweight, λa = 0.60.
Figure 2 — Anchor Spacing and Edge Distance Guidelines

1. s = on-center fastening spacing
c = edge distance from center of bolt
2. Apply appropriate load reduction factors from tables 3 through 7 for tension and shear spacing and/or edge distance of the
anchor or anchor group.
3. See Section 3.1.8 of the 2014 Hilti Anchor Fastening Technical Guide, Volume 2 for determining compounded spacing and
edge distance reduction as well as intermediate load values for concrete strengths and embedment.
c1 V
s c2
h
Table 5-9 Load Adjustment Factors

Table 3 — Load Adjustment Factors for 1/4-in. Diameter KBV Carbon Steel Anchor in Uncracked Concrete1
Spacing Edge Distance in Shear
Spacing Factor Edge Distance Factor
1/4 in. KBV Carbon Steel Factor in ⊥ ∥
in Tension in Tension
Uncracked Concrete Shear2 Toward Edge To Edge
fAN fRN
fAV fRV fRV
Embedment hnom 1-1/8 2 1-1/8 2 > 1-1/8 > 1-1/8 > 1-1/8
in (mm) (29) (51) (29) (51) (29) (29) (29)
2-1/4 (57) 0.92 0.71 0.69 0.67 0.62 0.58 0.69
2-1/2 (64) 0.97 0.74 0.77 0.72 0.63 0.67 0.77
Spacing (s) / Edge Distance (ca) - in. (mm)
3 (76) 1.00 0.79 0.92 0.86 0.65 0.89 0.92

3-1/2 (89) 0.83 1.00 1.00 0.68 1.00 1.00
4 (102) 0.88 0.71
4-1/2 (114) 0.93 0.73
5 (127) 0.98 0.76
5-1/2 140) 1.00 0.78
6 (152) 0.81
6-1/2 (165) 0.83
7 (178) 0.86
7-1/2 (191) 0.88
8 (203) 0.91
9 (229) 0.96
10 (254) 1.00
1 Linear interpolation not permitted.
2 Spacing factor reduction in shear, fAV, assumes an influence of a nearby edge. If no edge exists, then fAV = fAN.
Spacing Edge Distance in Shear
Spacing Factor Edge Distance Factor
3/8 in. KBV Carbon Steel Factor in ⊥ ∥
in Tension in Tension
Uncracked Concrete Shear2 Toward Edge To Edge
fAN fRN
fAV fRV fRV
Embedment hnom 1-5/8 2-1/2 1-5/8 2-1/2 > 1-5/8 > 1-5/8 > 1-5/8
in (mm) (41) (64) (41) (64) (41) (41) (41)
3-3/8 (86) 0.92 0.75 1.00 0.93 0.67 1.00 1.00
3-1/2 (89) 0.94 0.76 0.97 0.67
4 (102) 1.00 0.80 1.00 0.70

4-1/2 (114) 0.84 0.72
5 (127) 0.88 0.75
5-1/2 (140) 0.91 0.77
6 (152) 0.95 0.80
6-1/2 (165) 0.99 0.82
7 (178) 1.00 0.85
7-1/2 (191) 0.87
8 (203) 0.89
9 (229) 0.94
10 (254) 0.99
11 (279) 1.00
Edge Distance in Shear
Spacing
Spacing Factor Edge Distance Factor ⊥
1/2 in. KBV Carbon Steel Factor in ∥
in Tension in Tension Toward
Uncracked Concrete Shear2 To Edge
fAN fRN Edge f
fAV fRV
RV
Embedment hnom 2-1/4 3-1/2 2-1/4 3-1/2 > 2-1/4 > 2-1/4 > 2-1/4
in (mm) (57) (89) (57) (89) (57) (57) (57)
4-1/2 (114) 0.89 0.74 1.00 0.76 0.67 1.00 1.00
5 (127) 0.93 0.76 0.83 0.69
5-1/2 (140) 0.97 0.79 0.92 0.70
6 (152) 1.00 0.81 1.00 0.72

6-1/2 (165) 0.84 0.74
7 (178) 0.87 0.76
7-1/2 (191) 0.89 0.78
8 (203) 0.92 0.80
8-1/2 (216) 0.94 0.81
9 (229) 0.97 0.83
9-1/2 (241) 1.00 0.85
10 (254) 0.87
10-1/2 (267) 0.89
11 (279) 0.91
12 (305) 0.94
13 (330) 0.98
14 (356) 1.00
Spacing
fAN fRN Edge
fAV fRV
fRV
Embedment hnom 2-3/4 4 2-3/4 4 > 2-3/4 > 2-3/4 > 2-3/4
in (mm) (70) (102) (70) (102) (70) (70) (70)
5-5/8 (143) 0.93 0.77 1.00 0.82 0.67 1.00 1.00
6 (152) 0.96 0.79 0.87 0.68
6-1/2 (165) 1.00 0.82 0.95 0.69
7 (178) 1.00 0.84 1.00 0.71

7-1/2 (191) 0.86 0.72
8 (203) 0.89 0.74
8-1/2 (216) 0.91 0.75
9 (229) 0.94 0.77
9-1/2 (241) 0.96 0.78
10 (254) 0.99 0.80
10-1/2 (267) 1.00 0.81
11 (279) 0.83
12 (305) 0.86
13 (330) 0.89
14 (356) 0.91
16 (406) 0.97
18 (457) 1.00
Spacing
fAN fRN Edge
fAV fRV
fRV
Embedment hnom 3-1/4 4-3/4 3-1/4 4-3/4 > 3-1/4 > 3-1/4 > 3-1/4
in (mm) (83) (121) (83) (121) (83) (83) (83)
6-3/4 (171) 0.92 0.77 1.00 0.82 0.66 0.89 1.00
7 (178) 0.93 0.78 0.85 0.66 0.92
7-1/2 (191) 0.96 0.80 0.91 0.67 0.98
8 (203) 1.00 0.82 0.97 0.69 1.00

8-1/2 (216) 0.84 1.00 0.70
9 (229) 0.86 0.71
9-1/2 (241) 0.88 0.72
10 (254) 0.90 0.73
11 (279) 0.94 0.75
12 (305) 0.98 0.78
13 (330) 1.00 0.80
14 (356) 0.82
15 (381) 0.85
16 (406) 0.87
18 (457) 0.92
20 (508) 0.96
24 (610) 1.00
Table 8 — KBV Carbon Steel Anchor Allowable Loads in Grout-Filled Concrete Masonry Units
Min. Distance from
Anchor Diameter Anchor Depth Tension lb (kN) Shear lb (kN)
Edge of Block
in. (mm) in. (mm)
in. (mm) in. (mm) in. (mm)
1-1/8 4 (102)
150 (0.7) 380 (1.7)
1/4 (29) 12 (305)
(6.4) 2 4 (102)
540 (2.4) 445 (2.0)
(51) 12 (305)
1-5/8 4 (102) 320 (1.4) 735 (3.3)
3/8 (41) 12 (305) 340 (1.5) 940 (4.2)
(9.5) 2-1/2 4 (102)
780 (3.5) 950 (4.2)
(64) 12 (305)
2-1/4 4 (102) 630 (2.8) 830 (3.7)
1/2 (57) 12 (305) 665 (3.0) 1465 (6.5)
(12.7) 3-1/2 4 (102) 1065 (4.7)
905 (4.0)
(89) 12 (305) 2100 (9.3)
2-3/4 4 (102) 815 (3.6) 890 (4.0)
5/8 (70) 12 (305) 865 (3.8) 2165 (9.6)
(15.9) 4 4 (102) 970 (4.3)
1165 (5.2)
(102) 12 (305) 2770 (12.3)
3-1/4 4 (102) 785 (7.0)
930 (4.1)
3/4 (83) 12 (305) 3135 (13.8)
(19.1) 4-3/4 4 (102) 1365 (6.1) 825 (3.7)
(121) 12 (305) 1710 (7.6) 3305 (14.7)
1. Values are for anchor installed in Type 1 Grade N, lightweight, medium-weight, or normal-weight concrete masonry units conforming to UBC Standard 21-4, The masonry units must be
fully grouted with coarse grout conforming to UBC Standard 21-15 Type S, N, or M. Masonry prism compressive strength must be at least 1500 psi at the time of installation when tested in
accordance with UBC Standard 21-17.
2. Anchors must be installed a minimum of 1-3/8 inch from any vertical mortar Joint (see figure).
3. Anchor locations are limited to one per masonry cell.
4. Embedment depth is measured from the outside face of the concrete masonry unit.
5. Linear interpolation to determine load values at intermediate edge distances is permitted.
6. All allowable loads based on safety factor of 4.0.
Combined Shear and Tension Loading for Grout-filled Masonry

⎛ N ⎞ ⎛ V ⎞
⎜_____
d
⎜ + ⎜____
d
⎜≤ 1.0
⎝ Nrec ⎠ ⎝ Vrec ⎠
Figure 3 — Installation in Grout-filled Concrete Masonry Unit

1 Anchor installation is allowed in all non-shaded areas.
Table 9 — Carbon Steel KBV Anchor Allowable Loads in Top of Grout-filled Masonry Walls1
Minimum Shear lb (kN)
Anchor Diameter Tension lb
Embedment
in. (mm) (kN) V1 V2
in. (mm)
1/2 3-1/2 645 310 615
(12.7) (89) (2.9) (1.4) (2.7)
5/8 4 850 310 615
(15.9) (102) (3.8) (1.4) (2.7)
1 V
alues are for anchors installed in Type 1 Grade N, lightweight, medium-weight, or normal-weight concrete masonry units conforming to UBC Standard 21-4.
The masonry units must be fully grouted with coarse grout conforming to UBC Standard 21-15, Type S, N, or M. Masonry prism compressive strength must be
at least 1500 psi at the time of installation when tested in accordance with UBC Standard 21-17.
Figure 4 — Installation in Top of Grout-filled Masonry Walls
Grout V2
V1
Min 1-3/4"
Min 4"
Installation Instructions
Installation instructions for use (IFU) are included with each product package. They can also be viewed or downloaded online
at www.us.hilti.com (US) and www.hilti.ca (Canada). Because of the possibility of changes, always verify that downloaded
IFU are current when used. Proper installation is critical to achieve full performance. Training is available on request. Contact
Hilti Technical Services for applications and conditions not addressed in the IFU.
Installation Instructions
For installation instructions and parameters refer to Tables of this document and the Instructions for use contained in each box of
anchors.
Ordering Information
Thread Length
Item No. Description (inches) Qty Packaging
02078657 KBV 1/4 x 2-1/4 1 100 Box
02078658 KBV 1/4 x 3-1/4 2 100 Box
02078659 KBV 3/8 x 3 1-1/2 50 Box
02078800 KBV 3/8 x 3-3/4 2-1/4 50 Box
02078801 KBV 3/8 x 5'' 3-1/2 50 Box
02078802 KBV 1/2 x 3-3/4 2 25 Box
02078803 KBV 1/2 x 4-1/2 2-3/4 25 Box
02078804 KBV 1/2 x 5-1/2 3-3/4 25 Box
02078805 KBV 5/8 x 4-3/4 2-3/4 15 Box
02078806 KBV 5/8 x 6 4 15 Box
02078807 KBV 3/4 x 4-3/4 2-7/16 10 Box
02078808 KBV 3/4 x 5-1/2 3-1/4 10 Box
02078809 KBV 3/4 x 7 4-5/8 10 Box
03512163 KBV 1/4 x 2-1/4 MC 1 1200 MC
03512164 KBV 1/4 x 3-1/4 MC 2 1200 MC
03512165 KBV 3/8 x 3 MC 1-1/2 600 MC
03512166 KBV 3/8 x 3-3/4 MC 2-1/4 400 MC
03512167 KBV 3/8 x 5'' MC 3-1/2 400 MC
03512168 KBV 1/2 x 3-3/4 MC 2 200 MC
03512169 KBV 1/2 x 4-1/2 MC 2-3/4 200 MC
03512170 KBV 1/2 x 5-1/2 MC 3-3/4 200 MC
03512171 KBV 5/8 x 4-3/4 MC 2-3/4 120 MC
03512172 KBV 5/8 x 6 MC 4 120 MC
03512173 KBV 3/4 x 4-3/4 MC 2-7/16 80 MC
03512174 KBV 3/4 x 5-1/2 MC 3-1/4 80 MC
03512175 KBV 3/4 x 7 MC 4-5/8 60 MC
03512176 KBV 1/4 x 2-1/4 8 MC 1 9600 8 MC
03512177 KBV 1/4 x 3-1/4 8 MC 2 9600 8 MC
03512178 KBV 3/8 x 3 8 MC 1-1/2 4800 8 MC
03512179 KBV 3/8 x 3-3/4 8 MC 2-1/4 3200 8 MC
03512180 KBV 3/8 x 5'' 8 MC 3-1/2 3200 8 MC
03512181 KBV 1/2 x 3-3/4 8 MC 2 1600 8 MC
03512182 KBV 1/2 x 4-1/2 8 MC 2-3/4 1600 8 MC
03512183 KBV 1/2 x 5-1/2 8 MC 3-3/4 1600 8 MC
03512184 KBV 5/8 x 4-3/4 8 MC 2-3/4 960 8 MC
03512185 KBV 5/8 x 6 8 MC 4 960 8 MC
03512186 KBV 3/4 x 4-3/4 8 MC 2-7/16 640 8 MC
03512187 KBV 3/4 x 5-1/2 8 MC 3-1/4 640 8 MC
03512188 KBV 3/4 x 7 8 MC 4-5/8 480 8 MC
Note: All dimensions in inches

KBV Expansion Anchor Product Description

Uploaded by

Copyright:

Available Formats

KBV Expansion Anchor Product Description

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

KBV Expansion Anchor Product Description

Uploaded by

Copyright:

Available Formats

KBV Expansion Anchor