Pilot Oil Supply: Type: MHSTE5G L1X/350 MHSTE5G L1X/100
Pilot Oil Supply: Type: MHSTE5G L1X/350 MHSTE5G L1X/100
2.4
115
02/10 Hengli hydraulic Pilot Control Unit
Contents
Page
Features 03
Order details 05
Technical Data 06
Symbol 09
02
116
Pilot Oil Supply Type MHSTE5G Hengli hydraulic 03 /10
Features
· Supply directly from pilot oil circuits with oil in the low pressure range
· Without integrated pressure relief valve
· Low energy consumption
02
117
04/10 Hengli hydraulic Pilot Control Unit
The pilot oil supply systems type MHSTE.. supply reduced pressure to pilot units which are used for
the hydraulic or electrohydraulic operation of medium and high pressure power systems.
The pilot oil supply unit mainly consists of housing (1), accumulator (2) , a pressure reducing valve (3)
a direct operated pressure relief valve (4) as well as a check valve (5).
The pressure fluid from P1 flows through the pressure reducing valve (3) and the check valve (5) and
supplies the pilot oil circuit connected via PV or PR with reduced pressure.
With the accumulator (2) the pilot oil circuit has a power reserve for the supply of the consumers
The pressure relief valve (4) secures the pilot oil circuit in the case of a malfunction of the pressure
The solenoid operated directional valves (6; 7) allow or block the flow via BV or PR for the hydraulic
two-point-control of switching motors (connection in BV) or for the oil drain (safety function) of the
Note:Pilot oil supply systems MHSTE are used in hydraulic or electrohydraulic operated machines
02
without pilot oil pump. If the accumulator is empty or if the pilot oil unit has no accumulator the
pressure of approx. 10 bar must be produced in one of the power circuits when starting the system in
6 7
4 5
3 1 2
118
Pilot Oil Supply Type MHSTE5G Hengli hydraulic 05 /10
Order details
MHSTE5G L1X /
*
Pressure (bar) 350 Further details
Pressure (bar) 100
None= Without filter
With accumulator G = With filter(10μm)
(standard)0.32L =B032
Connections
Without integrated directional valve =L10
01= Connections as pipe threads
With 2 integrated directional valve =L12
acc.to ISO 228/1
With 3 integrated directional valve =L13
Sealing material
Without integrated directional valve =NONE M= NBR seals, suitable for mineral oil
12V DC, 18W, with DEUTSCH DT06-2S =G12ZC1 ( HL, HLP ) to DIN 51524
12V DC, 18W, with DELPHI 12010973 =G12W
24V DC, 19W, with DEUTSCH DT06-2S =G24ZC1
02
119
06/10 Hengli hydraulic Pilot Control Unit
Technical Data
(Please inquire in case the intended use of unit is outside the given values!)
General
Weight Type 350 (with reducing valve) kg 5.2
Type 100(without reducing valve)
Without integrated directional valve kg 4.2
With 2 integrated directional valve kg 6.1
With 3 integrated directional valve kg 6.8
Installation position Any
Hydraulic
-Type 350 bar up to 350
Primary pressure
-Type 100 bar up to 350
Secondary pressure -Type 350 bar 33.5 to 36.5
-Type 350 L/min 20
Flow capacity
-Type 100 L/min 25
Hydraulic fluid Mineral oil(HL, HLP)acc.to DIN51524
02 Hydraulic fluid temperature range ℃ -20 to +90
Viscosity range mm/S 10 to 420
Maximum permitted degree of the contamination
NAS1638 Class 20/18/15
of hydraulic fluid cleanliness class
Electrical
Normal voltage V 12V DC/24V DC
Protection type acc.to DIN 40050 IP65
Consumed nominal power W 18/19
120
Pilot Oil Supply Type MHSTE5G Hengli hydraulic 07 /10
130
80
4-M8(MA=17.5N*m)
27 30.4
90
70.5
70
27 25
49.5
27
62
10
30
29 70 30
65 50
02
4-Ø10.5
20
310
56±0.2
72
47
26
8
≈40
15
8 94±0.2
62
80 110
109
121
08/10 Hengli hydraulic Pilot Control Unit
68±0.2
88
88
53.5
58
58
38
32
312.5
10
4-Ø10.5
119.5
83
≈40
02
20 152 ± 0.2 10
111.4 182.5
210
11.5 187±0.2
4-Ø11
< 330 >
A
68±0.2
88
68.5
59
60
53
34.5
46
80
30
≈40
52
62 67
80 104
144
122
Pilot Oil Supply Type MHSTE5G Hengli hydraulic 09 /10
Symbol
P
P1
T
Pv
P1
Pr
M
Bv
P2
MHSTE5G L1X/350 B032 L12 G12W M01 MHSTE5G L1X/100 B032 L10 G12ZC1 M01G
P P1
MP1
02
A
MP1
P1 P2
P2 P3
P3 P4
T T
MHSTE5G L1X/100 B032 L12 G12ZC1 M01G MHSTE5G L1X/100 B032 L10 G24ZC1 M01G
123