COURSE FILE

ADVANCED SOLID MECHANICS

GURU NANAK DEV ENGINEERING COLLEGE,

LUDHIANA

Branch – M.Tech Structural Engineering

Semester – 2nd

Session – January to May, 2020

Name of Teacher – Er. Sukhwinder Singh

 GURU NANAK DEV

ENGINEERING COLLEGE,

LUDHIANA

COURSE FILE

Advanced Solid Mechanics

(MST-103)

Branch : M.Tech Structural Engineering

Semester : 2nd

Session : January to May, 2020

Teacher : Er. Sukhwinder Singh

 Table of Contents

S. No. Contents

1 Time Table

2 Syllabus

3 Mapping of Syllabus and CO’s

4 Mapping of CO’s and PO’s

5 Course Plan

6 Planning of Assignments

7 Assignments

8 Sessional

9 Syllabus Delivery Report

 SYLLABUS

MST-103 Advanced Solid Mechanics

Internal Marks: 50 L T P
External Marks: 50 3 0 0
Total Marks: 100

Course Outcomes:

After completing this course the student must demonstrate the knowledge and ability to:

1. Develop stress and strain tensors and perform transformations.

2. Solve the advanced practical problems related to the theory of elasticity, concepts of stress and
strain, strain energy.
3. Learn about the elastic and plastic behavior of material and evaluate stress
invariants, principal stresses and their directions and determine strain invariants, principal
strains and their directions.
4. Develop constitutive relationships between stress and strain for linearly elastic solid.
5. Understand the concept of stresses and strains in 2D
6. Know the different theories for Torsion.

Syllabus Content:
Elasticity: Displacement, Strain and Stress Fields, Constitutive Relations, Cartesian Tensors
and Equations of Elasticity
Strain and Stress Field: Elementary Concept of Stress and Strain at a Point; Principal
Axes; Principal stresses and Strains; Compatibility Conditions; Stress Components on an
Arbitrary Plane; Differential Equations of Equilibrium, Hydrostatic and Deviatoric
Components.
Equations of Elasticity: Equations of Equilibrium, Stress-Strain relations, Strain
Displacement and Compatibility Relations, Co-axiality of the Principal Directions.
Two-Dimensional Problems of Elasticity: Plane Stress and Plane Strain Problems, Airy’s
stress Function, Use of Airy’s function in beam analysis; Two-Dimensional Problems in
Polar Coordinates
Torsion of Prismatic Bars: Saint Venant’s Method, Prandtl’s Membrane Analogy, Torsion
of Rectangular Bar, Torsion of Thin Tubes
Plastic Deformation: Strain Hardening, Idealized Stress- Strain curve, Yield Criteria, von-
Mises Yield Criterion, Tresca Yield Criterion, Plastic Stress-Strain Relations, Principle of
Normality and Plastic Potential, Isotropic Hardening

References:

1. Theory of Elasticity, Timoshenko S. and Goodier J. N., McGraw Hill

2. Elasticity, Sadd M.H., Elsevier
3. Engineering Solid Mechanics, Ragab A.R.and Bayoumi S.E., CRC Press
4. Computational Elasticity, Ameen M., Narosa
5. Solid Mechanics, KazimiS. M. A., Tata McGraw Hill
6. Advanced Mechanics of Solids, Srinath L. S., Tata McGraw Hill
 Mapping Matrix of Syllabus and CO’s
SYLLABUS CO’s

Elasticity: Displacement, Strain and Stress Fields,

Constitutive Relations, Cartesian Tensors and Equations of CO1
Elasticity.

Strain and Stress Field: Elementary Concept of Stress

and Strain at a Point; Principal Axes; Principal stresses and
Strains; Compatibility Conditions; Stress Components on
CO2
an Arbitrary Plane; Differential Equations of Equilibrium,
Hydrostatic and Deviatoric Components.

Equations of Elasticity: Equations of Equilibrium,

Stress-Strain relations, Strain Displacement and
Compatibility Relations, Co-axiality of the Principal
Directions.
Plastic Deformation: Strain Hardening, Idealized Stress- CO2, CO3

Strain curve, Yield Criteria, von-Mises Yield Criterion,

Tresca Yield Criterion, Plastic Stress-Strain Relations,
Principle of Normality and Plastic Potential, Isotropic
Hardening.

Two-Dimensional Problems of Elasticity: Plane Stress

and Plane Strain Problems, Airy’s stress Function, Use of
CO4, CO5
Airy’s function in beam analysis; Two-Dimensional
Problems in Polar Coordinates.

Torsion of Prismatic Bars: Saint Venant’s Method,

Prandtl’s Membrane Analogy, Torsion of Rectangular Bar, CO6
Torsion of Thin Tubes.

COURSE PLAN
 Subject MST-103 ADVANCED SOLID MECHANICS
(SECOND SEMESTER)
Session Jan-May 2020
Total Period Planned 36 Total No. of Weeks 12
Syllabus for MST-1
Sr No. Week Topic to be covered CO Assignment
Elasticity: Displacement, Strain and Stress Fields,
1 1 Constitutive Relations, Cartesian Tensors and 1
Equations of Elasticity.
Strain and Stress Field: Elementary Concept of
Stress and Strain at a Point; Principal Axes; Principal
stresses and Strains; Compatibility Conditions; Stress
2 2,3 2 1
Components on an Arbitrary Plane; Differential
Equations of Equilibrium, Hydrostatic and Deviatoric
Components.
Equations of Elasticity: Equations of Equilibrium,
Stress-Strain relations, Strain Displacement and
3 4, 5 2
Compatibility Relations, Co-axiality of the Principal
Directions.
Syllabus for MST-2
Two-Dimensional Problems of Elasticity: Plane
Stress and Plane Strain Problems, Airy’s stress
4 6,7 3 2
Function, Use of Airy’s function in beam analysis;
Two-Dimensional Problems in Polar Coordinates\
Torsion of Prismatic Bars: Saint Venant’s Method,
Prandtl’s Membrane Analogy, Torsion of Rectangular
5 8, 9 4, 5, 6
Bar, Torsion of Thin Tubes

Plastic Deformation: Strain Hardening, Idealized

Stress- Strain curve, Yield Criteria, von-Mises Yield
10, Criterion, Tresca Yield Criterion, Plastic Stress-Strain
6 5, 6
11,12 Relations, Principle of Normality and Plastic
Potential, Isotropic Hardening

MID SESSIONAL TEST-1

Guru Nanak Dev Engineering College, Ludhiana
 Department of Civil Engineering
Program M.Tech. Structural Engineering Semester 2nd

Subject MST-103 Subject Title Advanced

Code Solid
Mechanics
Mid 1 Course Prof.
Semester Coordinator(s) Sukhwinde
Test (MST) r
No. Singh
Max. 30 Time Duration 1 hour 30
Marks minutes
Date of 17.02.2020 Roll Number
MST
Note: Attempt all questions
Q. No. Question COs, Mar
RBT ks
level
Q1 What is two-dimensional state of stress? Write down CO1, 5
expression for principal stress and maximum shear stress? L1
Q2 Explain in detail stress as a tensor quantity? How it is different CO1, 5
from a vector? L2
Q3 Derive Cauchy’s stress formula on an arbitrary stress plane. CO1, 10
L1
CO2, 10
Q4 A rectangular beam is subjected to pre bending moment ‘M’. L5
The cross-section of the beam is shown in given figure. Using
the elementary flexure formula, determine the normal and
shearing stresses at a point (x,y) on the plane AB.

RBT Lower Order Thinking Levels Higher Order Thinking Levels

Classificati (LOTS) (HOTS)
on
RBT Level L1 L2 L3 L4 L5 L6
Number
RBT Level Rememberi Understandi Applyi Analyzin Evaluating Creating
Name ng ng ng g

Planning of Assignments

Guru Nanak Dev Engineering College, Ludhiana

 Department of Civil Engineering
Program M.Tech.(SE) Semester 2nd
Subject Code MST-103 Subject Title Advanced Solid Mechanics

S. No. Type of Assignment

No. of written assignment: 1 before MST 1
1
2 before MST 2
No. of presentations: 2 in full semester
2

Assignment-1
Guru Nanak Dev Engineering College, Ludhiana
Department of Civil Engineering
Program M.Tech.(CE) Semester 2nd
Subject Code MST-103 Subject Title Advanced Solid
Mechanics
Max. Marks 10 Submission date 14 February,
2020
Note: Attempt all questions
Q. Question CO Mar
No s, ks
.
Q1 Question 1. 1 2

Q2 2 2

Q3 2 3

Mapping of CO’s with PO’s

CO to PO Mapping
CO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1        
CO2 √        
CO3        
CO4 √      
CO5 √      
CO6 √
CO7      

Syllabus Delivery Progress Record

 Subject Lecture
Program Subject Title Section / Group Semester
Code Type
Advanced
M.Tech.(Structural
MST-103 Solid T A 2
Engineering)
Mechanics
Attendance Attendance Topics/Experiments
Sr. No. Day of Week Teacher
Date Period Covered
Introduction to
Sukhwinder
1 13 Jan, 2020 Thursday 2 Displacement, Strain
Singh
and Stress Fields
Discussion on
Sukhwinder
2 17 Jan, 2020 Friday 5 Constitutive Relations,
Singh
Cartesian Tensors,
Introduce Equations of Sukhwinder
3 20 Jan, 2020 Monday 5
Elasticity Singh

Sukhwinder
4 23 Jan, 2020 Thursday 7 Equations of Elasticity
Singh
Elementary Concept of
Sukhwinder
5 24 Jan, 2020 Friday 7 Stress and Strain at a
Singh
Point
Principal stresses and Sukhwinder
6 27 Jan, 2020 Monday 5
Strain Singh
Principal stresses and
Strain and Sukhwinder
7 29 Jan, 2020 Wednesday 1
Compatibility Singh
Conditions
Stress Components on Sukhwinder
8 30 Jan, 2020 Thursday 7
an Arbitrary Plane Singh

Stress Components on Sukhwinder

9 31 Jan, 2020 Friday 7
an Arbitrary Plane Singh

Differential Equations Sukhwinder

10 5 Feb, 2020 Monday 5
of Equilibrium, Singh

Differential Equations Sukhwinder

11 10 Feb, 2020 Wednesday 1
of Equilibrium, Singh

Co-axiality of the Sukhwinder

12 11 Feb, 2020 Friday 7
Principal Directions. Singh