1

Case Name: C:\Users\...\Rar$DIa13796.25271\13 acetona3.usc

2 Company Name Not Available
3 Calgary, Alberta Unit Set: SI
4 CANADA
Date/Time: Monday May 4 2020, 14:28:59
5
6
7
Heat Exchanger: E-100 (** Specs Only **)
8
9
10
CONNECTIONS
11
12
Tube Side Shell Side
13 Outlet Inlet
14 Name Sale CC Ent Reac Name Entrada carca
15 To Op. Plug Flow Reactor PFR-100 From Op.
16 Temp 234.00 C * Temp 254.00 C *
17
18
PARAMETERS
19
20
Exchanger Design (Weighted)
21 Tube Side DeltaP: 14.00 kPa * Shell Side DeltaP: 10.00 kPa * UA:
22 Tube Side Data Shell Side Data
23 Heat Transfer Coefficient Heat Transfer Coefficient
24 Tube Pressure Drop 14.00 kPa * Shell Pressure Drop 10.00 kPa *
25 Fouling Fouling
26 Tube Length Shell Passes
27 Tube O.D. Shell Series
20.00 mm *
28 Tube Thickness Shell Parallel
29 Tube Pitch Baffle Type Single
30 Orientation Baffle Cut(%Area)
31 Passes Per Shell Horizontal Baffle Orientation Horizontal
32 Tubes Per Shell Spacing
33 Layout Angle Diameter
34 TEMA Type Triangular (30 degrees) Area
35
36
RATING
37
38
Sizing
39 Overall Data
40 Configuration
41 Calculated Information
42 Shell HT Coeff Shell DP 10.00 kPa * Shell Vol per Shell
43 Tube HT Coeff Tube DP 14.00 kPa * Tube Vol per Shell
44 Shell Data
45 Shell and Tube Bundle
46 Shell Baffles
47 Tube Data
48 Dimensions
49 OD 20.00 mm * ID Tube Thickness Tube Length
50 Tube Properties
51
52
CONDITIONS
53 Name Sale valvula Sale CC Ent Reac Entrada carca
54 Vapour 1.0000 *
55 Temperature (C) 234.0000 * 254.0000 *
56 Pressure (kPa) 216.0000 *
57 Molar Flow (kgmole/h)
58 Mass Flow (kg/h) 2990.0000 *
59 Std Ideal Liq Vol Flow (m3/h)
60 Molar Enthalpy (kJ/kgmole)
61 Molar Entropy (kJ/kgmole-C)
62 Heat Flow (kJ/h)
63
64
DYNAMICS
65
66
Basic Model
67
68
Model Parameters
69 Honeywell International Inc. UniSim Design (R461.1 build 21252) Page 1 of 11
Licensed to: Company Name Not Available Printed by: 2727 * Specified by user.
1
Case Name: C:\Users\...\Rar$DIa13796.25271\13 acetona3.usc
2 Company Name Not Available
3 Calgary, Alberta Unit Set: SI
4 CANADA
Date/Time: Monday May 4 2020, 14:28:59
5
6
7
Heat Exchanger: E-100 (continued)
8
9 Tube Volume (m3) Shell UA (kg/h)
10 Shell Volume (m3) Tube UA (kg/h)
11 Elevation (m) Minimum Flow Scale Factor 0.0000 *
12 Overall UA (kJ/C-h)
13
14
Summary
15
16
Pressure Flow Specifications
17
18
Shell Side Specification
19 Delta P (kPa) 10.00 * Active k kg/hr/sqrt(kPa-kg/m3) Not Active
20
21
Tube Side Specifications
22 Delta P (kPa) 14.00 * Active k kg/hr/sqrt(kPa-kg/m3) Not Active
23
24
PED Sizing
25
Sizing Status: Sizing Not Successful
26
27 Sizing Value Simulation Value
28 Tube Diameter 20.00 mm *
29
30
Heat Exchanger: E-101 (** Specs Only **)
31
32
33
CONNECTIONS
34
35
Tube Side Shell Side
36 Outlet Inlet
37 Name Slad Rec Fria Name Ent cc2 vap
38 To Op. Heat Exchanger E-102 From Op.
39 Temp 45.00 C * Temp 30.00 C *
40
41
PARAMETERS
42
43
Exchanger Design (Weighted)
44 Tube Side DeltaP: 14.00 kPa * Shell Side DeltaP: 0.0000 kPa * UA:
45 Tube Side Data Shell Side Data
46 Heat Transfer Coefficient Heat Transfer Coefficient
47 Tube Pressure Drop 14.00 kPa * Shell Pressure Drop 0.00 kPa *
48 Fouling Fouling
49 Tube Length Shell Passes
50 Tube O.D. Shell Series
20.00 mm *
51 Tube Thickness Shell Parallel
52 Tube Pitch Baffle Type Single
53 Orientation Baffle Cut(%Area)
54 Passes Per Shell Horizontal Baffle Orientation Horizontal
55 Tubes Per Shell Spacing
56 Layout Angle Diameter
57 TEMA Type Triangular (30 degrees) Area
58
59
RATING
60
61
Sizing
62 Overall Data
63 Configuration
64 Calculated Information
65 Shell HT Coeff Shell DP 0.0000 kPa * Shell Vol per Shell
66 Tube HT Coeff Tube DP 14.00 kPa * Tube Vol per Shell
67 Shell Data
68 Shell and Tube Bundle
69 Honeywell International Inc. UniSim Design (R461.1 build 21252) Page 2 of 11
Licensed to: Company Name Not Available Printed by: 2727 * Specified by user.
1
Case Name: C:\Users\...\Rar$DIa13796.25271\13 acetona3.usc
2 Company Name Not Available
3 Calgary, Alberta Unit Set: SI
4 CANADA
Date/Time: Monday May 4 2020, 14:28:59
5
6
7
Heat Exchanger: E-101 (continued)
8
9 Shell Baffles
10 Tube Data
11 Dimensions
12 OD 20.00 mm * ID Tube Thickness Tube Length
13 Tube Properties
14
15
CONDITIONS
16 Name Slad Rec Fria Ent cc2 vap
17 Vapour 0.0000 *
18 Temperature (C) 45.0000 * 30.0000 *
19 Pressure (kPa) 300.0000 *
20 Molar Flow (kgmole/h)
21 Mass Flow (kg/h) 77900.0000 *
22 Std Ideal Liq Vol Flow (m3/h)
23 Molar Enthalpy (kJ/kgmole)
24 Molar Entropy (kJ/kgmole-C)
25 Heat Flow (kJ/h)
26
27
DYNAMICS
28
29
Basic Model
30
31
Model Parameters
32 Tube Volume (m3) Shell UA (kg/h)
33 Shell Volume (m3) Tube UA (kg/h)
34 Elevation (m) Minimum Flow Scale Factor 0.0000 *
35 Overall UA (kJ/C-h)
36
37
Summary
38
39
Pressure Flow Specifications
40
41
Shell Side Specification
42 Delta P (kPa) 0.0000 * Active k kg/hr/sqrt(kPa-kg/m3) Not Active
43
44
Tube Side Specifications
45 Delta P (kPa) 14.00 * Active k kg/hr/sqrt(kPa-kg/m3) Not Active
46
47
PED Sizing
48
Sizing Status: Sizing Not Successful
49
50 Sizing Value Simulation Value
51 Tube Diameter 20.00 mm *
52
53
Heat Exchanger: E-102 (** Specs Only **)
54
55
56
CONNECTIONS
57
58
Tube Side Shell Side
59 Inlet Outlet Inlet
60 Name Slad Rec Fria Name Entrada Sep1 Name Entrada cc3 liq
61 From Op. E-101 Exchanger To Op. Separator V-100 From Op.
62 Temp 45.00 C * Temp 20.00 C * Temp 5.00 C *
63
64
PARAMETERS
65
66
Exchanger Design (Weighted)
67 Tube Side DeltaP: 14.00 kPa * Shell Side DeltaP: 0.0000 kPa * UA:
68 Tube Side Data Shell Side Data
69 Honeywell International Inc. UniSim Design (R461.1 build 21252) Page 3 of 11
Licensed to: Company Name Not Available Printed by: 2727 * Specified by user.
1
Case Name: C:\Users\...\Rar$DIa13796.25271\13 acetona3.usc
2 Company Name Not Available
3 Calgary, Alberta Unit Set: SI
4 CANADA
Date/Time: Monday May 4 2020, 14:28:59
5
6
7
Heat Exchanger: E-102 (continued)
8
9
10
Exchanger Design (Weighted)
11 Heat Transfer Coefficient Heat Transfer Coefficient
12 Tube Pressure Drop 14.00 kPa * Shell Pressure Drop 0.00 kPa *
13 Fouling Fouling
14 Tube Length Shell Passes
15 Tube O.D. Shell Series
20.00 mm *
16 Tube Thickness Shell Parallel
17 Tube Pitch Baffle Type Single
18 Orientation Baffle Cut(%Area)
19 Passes Per Shell Horizontal Baffle Orientation Horizontal
20 Tubes Per Shell Spacing
21 Layout Angle Diameter
22 TEMA Type Triangular (30 degrees) Area
23
24
RATING
25
26
Sizing
27 Overall Data
28 Configuration
29 Calculated Information
30 Shell HT Coeff Shell DP 0.0000 kPa * Shell Vol per Shell
31 Tube HT Coeff Tube DP 14.00 kPa * Tube Vol per Shell
32 Shell Data
33 Shell and Tube Bundle
34 Shell Baffles
35 Tube Data
36 Dimensions
37 OD 20.00 mm * ID Tube Thickness Tube Length
38 Tube Properties
39
40
CONDITIONS
41 Name Slad Rec Fria Entrada Sep1 Entrada cc3 liq
42 Vapour 0.0000 *
43 Temperature (C) 45.0000 * 20.0000 * 5.0000 *
44 Pressure (kPa) 300.0000 *
45 Molar Flow (kgmole/h)
46 Mass Flow (kg/h) 13500.0000 *
47 Std Ideal Liq Vol Flow (m3/h)
48 Molar Enthalpy (kJ/kgmole)
49 Molar Entropy (kJ/kgmole-C)
50 Heat Flow (kJ/h)
51
52
DYNAMICS
53
54
Basic Model
55
56
Model Parameters
57 Tube Volume (m3) Shell UA (kg/h)
58 Shell Volume (m3) Tube UA (kg/h)
59 Elevation (m) Minimum Flow Scale Factor 0.0000 *
60 Overall UA (kJ/C-h)
61
62
Summary
63
64
Pressure Flow Specifications
65
66
Shell Side Specification
67 Delta P (kPa) 0.0000 * Active k kg/hr/sqrt(kPa-kg/m3) Not Active
68 Tube Side Specifications
69 Honeywell International Inc. UniSim Design (R461.1 build 21252) Page 4 of 11
Licensed to: Company Name Not Available Printed by: 2727 * Specified by user.
1
Case Name: C:\Users\...\Rar$DIa13796.25271\13 acetona3.usc
2 Company Name Not Available
3 Calgary, Alberta Unit Set: SI
4 CANADA
Date/Time: Monday May 4 2020, 14:28:59
5
6
7
Heat Exchanger: E-102 (continued)
8
9 Tube Side Specifications
10 Delta P (kPa) 14.00 * Active k kg/hr/sqrt(kPa-kg/m3) Not Active
11
12
PED Sizing
13
Sizing Status: Sizing Not Successful
14
15 Sizing Value Simulation Value
16 Tube Diameter 20.00 mm *
17
18 Mixer: MIX-100 (** Specs Only **)
19
20
21
CONDITIONS
22 Name Alc isopro Recipa
23 Vapour
24 Temperature (C) 25.0000 * 83.0000 *
25 Pressure (kPa) 101.0000 * 120.0000 *
26 Molar Flow (kgmole/h) 51.9600 * 5.8800 *
27 Mass Flow (kg/h)
28 Std Ideal Liq Vol Flow (m3/h)
29 Molar Enthalpy (kJ/kgmole)
30 Molar Entropy (kJ/kgmole-C)
31 Heat Flow (kJ/h)
32
33
34
Mixer: MIX-101 (** Specs Only **)
35
36
37
Mixer: MIX-102 (** Specs Only **)
38
39
Pump: P-100 (** Specs Only **)
40
41
42
PARAMETERS
43 Adiabatic Efficiency (%): Delta P: 200.0 kPa * Duty:
44
45
CURVES
46 Delta P: 200.0 kPa * Duty:
47
48
DYNAMICS
49
50
Dynamic Specifications
51 Head (m) 26.24 * Flow (m3/h)
52 Fluid Head (kJ/kg) Use Characteristic Curves
53 Speed (rpm) Linker Power Loss (kJ/h)
54 Efficiency (%) Electric Motor
55 Pressure Rise (kPa) 200.0 * Pump is Acting as a Turbine
56 Power (kJ/h) On/Off Method
57
58
Plug Flow Reactor: PFR-100 (** Specs Only **)
59
60
61
PARAMETERS
62
63
Physical Parameters
64 Type : User Specified Pressure Drop: 25.00 kPa *
65
66
Heat Transfer : Heating
67 Type : Direct Q Value Energy Stream : e reac Duty : 2.590e+006 kJ/h *
68
69 Honeywell International Inc. UniSim Design (R461.1 build 21252) Page 5 of 11
Licensed to: Company Name Not Available Printed by: 2727 * Specified by user.
1
Case Name: C:\Users\...\Rar$DIa13796.25271\13 acetona3.usc
2 Company Name Not Available
3 Calgary, Alberta Unit Set: SI
4 CANADA
Date/Time: Monday May 4 2020, 14:28:59
5
6
7
Plug Flow Reactor: PFR-100 (continued)
8
9
10
PARAMETERS
11
12
Dimensions
13 Total Volume: Length: 8.000 m * Diameter: 1.850 m * Number of Tubes: 1*
14 Wall Thickness: 0.0050 m * Void Fraction: 1.0000 * Void Volume:
15
16
Integration Information
17 Number of Segments: 20 * Minimum Step Fraction: 1.0e-06 * Minimum Step Length:
18
19
RATING
20
21
Sizing
22 Tube Dimensions
23 Total Volume Length 8.000 m * Diameter 1.850 m * Number of Tubes 1* Wall Thickness 0.0050 m *
24 Tube Packing
25 Void Fraction 1.0000 * Void Volume
26
27
Nozzle Parameters
28 Base Elevation Relative to Ground Level 0.0000 m * Diameter 1.850 m * Length 8.000 *
29
30
DYNAMICS
31
32
Vessel Parameters: Initialize from Product
33 Laminar Flow Fixed Delta P Not Activated
34 Flow Equation PFR Elevation (m) 0 *
35
36
Direct Q
37 SP (kJ/h) 2.590e+006 * Max. Available (kJ/h)
38 Min. Available (kJ/h)
39
40
Heat Flow into the PFR: Heating
41
42
Absorber: T-100 (** Specs Only **)
43
44
45
PROFILES
46 General Parameters
47 Sub-Flow Sheet: T-100 (COL1) Number of Stages: 11 *
48
49
SIDE STRIPPERS
50
51
SIDE RECTIFIERS
52
53
PUMP AROUNDS
54
55
VAP BYPASSES
56
57
Pressure Profile
58 Pressure (kPa) Pressure Drop (kPa)
59 1__TS-1 150.0 kPa *
60 2__TS-1
61 3__TS-1
62 4__TS-1
63 5__TS-1
64 6__TS-1
65 7__TS-1
66 8__TS-1
67 9__TS-1
68 10__TS-1
69 Honeywell International Inc. UniSim Design (R461.1 build 21252) Page 6 of 11
Licensed to: Company Name Not Available Printed by: 2727 * Specified by user.
1
Case Name: C:\Users\...\Rar$DIa13796.25271\13 acetona3.usc
2 Company Name Not Available
3 Calgary, Alberta Unit Set: SI
4 CANADA
Date/Time: Monday May 4 2020, 14:28:59
5
6
7
Absorber: T-100 (continued)
8
9 11__TS-1 163.0 kPa *
10
11
Pressure Solving Options
12 Pressure Tolerance 0.0001 * Pressure Drop Tolerance 0.0001 * Damping Factor 1.000 * Max Press Iterations 100 *
13
14
CONDITIONS
15 Name Agua pro sep1
16 Vapour
17 Temperature (C) 25.0000 *
18 Pressure (kPa) 150.0000 *
19 Molar Flow (kgmole/h) 20.0000 *
20 Mass Flow (kg/h)
21 Std Ideal Liq Vol Flow (m3/h)
22 Molar Enthalpy (kJ/kgmole)
23 Molar Entropy (kJ/kgmole-C)
24 Heat Flow (kJ/h)
25
26
Distillation: T-101 (** Specs Only **)
27
28
29
MONITOR
30 Specifications Summary
31 Specified Value Current Value Wt. Error Wt. Tol. Abs. Tol. Active Estimate Used
32 Reflux Ratio 0.0100 * 0.0100 * Off On Off
33 Ovhd Vap Rate 0.0100 * 1.000 kgmole/h * Off On Off
34 Distillate Rate 0.0100 * 1.000 kgmole/h * Off On Off
35 Reflux Rate 0.0100 * 1.000 kgmole/h * Off On Off
36 Btms Prod Rate 41.73 kgmole/h * 0.0100 * 1.000 kgmole/h * On On On
37 Comp Flow 0.0200 kgmole/h * 0.0100 * 1.000 kgmole/h * On On On
38 Temperature 61.00 C * 0.0100 * 1.000 C * On On On
39
40
PROFILES
41 General Parameters
42 Sub-Flow Sheet: T-101 (COL2) Number of Stages: 66 *
43
44
SIDE STRIPPERS
45
46
SIDE RECTIFIERS
47
48
PUMP AROUNDS
49
50
VAP BYPASSES
51
52
Vessels
53 Vessel Condenser @COL2 Reboiler @COL2
54 Diameter (m)
55 Length (m)
56 Volume (m3) 2.000 * 2.000 *
57 Orientation Horizontal Horizontal
58 Vessel has a Boot No No
59 Boot Diameter (m)
60 Boot Length (m)
61 Hold Up (m3)
62
63
Pressure Profile
64 Pressure (kPa) Pressure Drop (kPa)
65 Condenser 140.0 kPa *
66 1__Main TS
67 2__Main TS
68 3__Main TS
69 Honeywell International Inc. UniSim Design (R461.1 build 21252) Page 7 of 11
Licensed to: Company Name Not Available Printed by: 2727 * Specified by user.
1
Case Name: C:\Users\...\Rar$DIa13796.25271\13 acetona3.usc
2 Company Name Not Available
3 Calgary, Alberta Unit Set: SI
4 CANADA
Date/Time: Monday May 4 2020, 14:28:59
5
6
7
Distillation: T-101 (continued)
8
9 4__Main TS
10 5__Main TS
11 6__Main TS
12 7__Main TS
13 8__Main TS
14 9__Main TS
15 10__Main TS
16 11__Main TS
17 12__Main TS
18 13__Main TS
19 14__Main TS
20 15__Main TS
21 16__Main TS
22 17__Main TS
23 18__Main TS
24 19__Main TS
25 20__Main TS
26 21__Main TS
27 22__Main TS
28 23__Main TS
29 24__Main TS
30 25__Main TS
31 26__Main TS
32 27__Main TS
33 28__Main TS
34 29__Main TS
35 30__Main TS
36 31__Main TS
37 32__Main TS
38 33__Main TS
39 34__Main TS
40 35__Main TS
41 36__Main TS
42 37__Main TS
43 38__Main TS
44 39__Main TS
45 40__Main TS
46 41__Main TS
47 42__Main TS
48 43__Main TS
49 44__Main TS
50 45__Main TS
51 46__Main TS
52 47__Main TS
53 48__Main TS
54 49__Main TS
55 50__Main TS
56 51__Main TS
57 52__Main TS
58 53__Main TS
59 54__Main TS
60 55__Main TS
61 56__Main TS
62 57__Main TS
63 58__Main TS
64 59__Main TS
65 60__Main TS
66 61__Main TS
67 62__Main TS
68 63__Main TS
69 Honeywell International Inc. UniSim Design (R461.1 build 21252) Page 8 of 11
Licensed to: Company Name Not Available Printed by: 2727 * Specified by user.
1
Case Name: C:\Users\...\Rar$DIa13796.25271\13 acetona3.usc
2 Company Name Not Available
3 Calgary, Alberta Unit Set: SI
4 CANADA
Date/Time: Monday May 4 2020, 14:28:59
5
6
7
Distillation: T-101 (continued)
8
9 64__Main TS
10 65__Main TS
11 66__Main TS
12 Reboiler 150.0 kPa *
13
14
Pressure Solving Options
15 Pressure Tolerance 0.0001 * Pressure Drop Tolerance 0.0001 * Damping Factor 1.000 * Max Press Iterations 100 *
16
17
DYNAMICS
18
19
Vessel Dynamic Specifications
20 Vessel Condenser @COL2 Reboiler @COL2
21 Diameter (m)
22 Height.0 (m)
23 Volume.0 (m3) 2.000 * 2.000 *
24 Liquid Volume Percent (%) 50.00 * 50.00 *
25 Level Calculator Horizontal cylinder Horizontal cylinder
26 Fraction Calculator Use (corrected) levels and nozzles Use (corrected) levels and nozzles
27 Vessel Delta P (kPa)
28 Fixed Vessel P Spec (kPa)
29 Fixed P Spec Active Not Active Not Active
30
31
Distillation: T-102 (** Specs Only **)
32
33
34
MONITOR
35 Specifications Summary
36 Specified Value Current Value Wt. Error Wt. Tol. Abs. Tol. Active Estimate Used
37 Btms Prod Rate 34.99 kgmole/h * 0.0100 * 1.000 kgmole/h * On On On
38 Comp Flow 34.99 kgmole/h * 0.0100 * 1.000 kgmole/h * On On On
39 Vent Rate 0.1034 kgmole/h * 0.0100 * 1.000 kgmole/h * On On On
40
41
PROFILES
42 General Parameters
43 Sub-Flow Sheet: T-102 (COL3) Number of Stages: 19 *
44
45
SIDE STRIPPERS
46
47
SIDE RECTIFIERS
48
49
PUMP AROUNDS
50
51
VAP BYPASSES
52
53
Vessels
54 Vessel Condenser @COL3 Reboiler @COL3
55 Diameter (m)
56 Length (m)
57 Volume (m3) 2.000 * 2.000 *
58 Orientation Horizontal Horizontal
59 Vessel has a Boot No No
60 Boot Diameter (m)
61 Boot Length (m)
62 Hold Up (m3)
63
64
Pressure Profile
65 Pressure (kPa) Pressure Drop (kPa)
66 Condenser 120.0 kPa *
67 1__Main TS
68 2__Main TS
69 Honeywell International Inc. UniSim Design (R461.1 build 21252) Page 9 of 11
Licensed to: Company Name Not Available Printed by: 2727 * Specified by user.
1
Case Name: C:\Users\...\Rar$DIa13796.25271\13 acetona3.usc
2 Company Name Not Available
3 Calgary, Alberta Unit Set: SI
4 CANADA
Date/Time: Monday May 4 2020, 14:28:59
5
6
7
Distillation: T-102 (continued)
8
9 3__Main TS
10 4__Main TS
11 5__Main TS
12 6__Main TS
13 7__Main TS
14 8__Main TS
15 9__Main TS
16 10__Main TS
17 11__Main TS
18 12__Main TS
19 13__Main TS
20 14__Main TS
21 15__Main TS
22 16__Main TS
23 17__Main TS
24 18__Main TS
25 19__Main TS
26 Reboiler 140.0 kPa *
27
28
Pressure Solving Options
29 Pressure Tolerance 0.0001 * Pressure Drop Tolerance 0.0001 * Damping Factor 1.000 * Max Press Iterations 100 *
30
31
DYNAMICS
32
33
Vessel Dynamic Specifications
34 Vessel Condenser @COL3 Reboiler @COL3
35 Diameter (m)
36 Height.0 (m)
37 Volume.0 (m3) 2.000 * 2.000 *
38 Liquid Volume Percent (%) 50.00 * 50.00 *
39 Level Calculator Horizontal cylinder Horizontal cylinder
40 Fraction Calculator Use (corrected) levels and nozzles Use (corrected) levels and nozzles
41 Vessel Delta P (kPa)
42 Fixed Vessel P Spec (kPa)
43 Fixed P Spec Active Not Active Not Active
44
45
Separator: V-100 (** Specs Only **)
46
47
48
CONDITIONS
49 Name Entrada Sep1
50 Vapour
51 Temperature (C) 20.0000 *
52 Pressure (kPa)
53 Molar Flow (kgmole/h)
54 Mass Flow (kg/h)
55 Std Ideal Liq Vol Flow (m3/h)
56 Molar Enthalpy (kJ/kgmole)
57 Molar Entropy (kJ/kgmole-C)
58 Heat Flow (kJ/h)
59
60
61
62
63
64
65
66
67
68
69 Honeywell International Inc. UniSim Design (R461.1 build 21252) Page 10 of 11
Licensed to: Company Name Not Available Printed by: 2727 * Specified by user.
1
Case Name: C:\Users\...\Rar$DIa13796.25271\13 acetona3.usc
2 Company Name Not Available
3 Calgary, Alberta Unit Set: SI
4 CANADA
Date/Time: Monday May 4 2020, 14:28:59
5
6
7 Valve: VLV-100 (** Specs Only **)
8
9
CONDITIONS
10
11 Name sali bomba
12 Vapour
13 Temperature (C)
14 Pressure (kPa)
15 Molar Flow (kgmole/h)
16 Mass Flow (kg/h)
17 Std Ideal Liq Vol Flow (m3/h)
18 Molar Enthalpy (kJ/kgmole)
19 Molar Entropy (kJ/kgmole-C)
20 Heat Flow (kJ/h)
21
Pipe Model Parameters
22
23 Material Cast Iron Darcy Friction Factor
24 Roughness (m) Pipe k (kg/hr/sqrt(kPa-kg/m3))
25 Pipe Length (m) 0.0000 * Velocity (m/s)
26 Feed Diameter (m) Reynolds Number
27
Hold-Up Volume: 0.0000 m3 *
28
29
Actuator Parameters
30
31
Parameters Mode: Instantaneous
32
33
Dead Time Model: None
34
35
Actuator Position
36
37 Min Max Current Desired Offset
38 (%) (%) (%) (%) (%)
39 Valve 50.00 *
40 Actuator 50.00 *
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69 Honeywell International Inc. UniSim Design (R461.1 build 21252) Page 11 of 11
Licensed to: Company Name Not Available Printed by: 2727 * Specified by user.