Professional Documents
Culture Documents
Solutions To Exercise 2: Problem 2.29
Solutions To Exercise 2: Problem 2.29
Marvin Rausand
Email: marvin.rausand@ntnu.no
2008-09-02
Problem 2.29
(a) Let f j (t ) and R j (t ) denote the probability density unction and the survivor
function of component j , respectively.
Problem 2.30
(a) Let event A denote a failure due to excessive stress, and event A ∗ denote a
failure that is not due to stress, that is, a failure due to aging. The distribu-
tion function is then given by:
F (t ) = F 1 (t ) · p + F 2 (t ) · (1 − p)
(b) p denotes the probability that a specified future failure will be caused by
excessive stress.
1
0.4
z(t) 0.3
0.2
0.1
0
0 1 2 3 4 5
t[s]
(c) The failure rate function z(t ) can be expressed as z(t ) = f (t )/R(t ), that is,
f 1 (t ) · p + f 2 (t ) · (1 − p)
z(t ) =
R 1 (t ) · p + R 2 (t ) · (1 − p)
Problem 2.31
(a) The component may fail due to the two causes A and B . The time from
startup until the component fails from cause A is exponentially distributed
with failure rate λ A , and the time from startup until the component fails
from cause B is exponentially distributed with failure rate λB . The distri-
bution function of the (total) time to failure T is then
Letting p denote Pr(A), the probability that the component fails from cause
A, this can be written as:
F (t ) = F 1 (t ) · p + F 2 (t ) · (1 − p)
2
(b) The probability p = Pr(A) is the probability that the component fails from
cause A.
f (t ) pλ A e −λ A t + (1 − p)λB e −λB t
z(t ) = =
R(t ) pe −λ A t + (1 − p)e −λB t
The derivative z (t ) ≤ 0 for all t > 0 and the failure rate function z(t ) is
therefore decreasing (DFR) for all t > 0.