Type-Certificate Data Sheet: An Agency of The European Union

TCDS No.: E.
036 Type
Issue: 08 Trent 1000 17 August 2017
TYPE-CERTIFICATE
DATA SHEET
EASA TC E.036
for
Trent 1000 series engines
Type Certificate Holder

Rolls-Royce plc
PO Box 31
Derby DE24 8BJ
United Kingdom
For Models:
Trent 1000-A Trent 1000-A2 Trent 1000-AE3

Trent 1000-AE Trent 1000-AE2 Trent 1000-CE3
Trent 1000-C Trent 1000-C2 Trent 1000-D3
Trent 1000-CE Trent 1000-CE2 Trent 1000-G3
Trent 1000-D Trent 1000-D2 Trent 1000-H3
Trent 1000-E Trent 1000-E2 Trent 1000-J3
Trent 1000-G Trent 1000-G2 Trent 1000-K3
Trent 1000-H Trent 1000-H2 Trent 1000-L3
Trent 1000-J2 Trent 1000-M3
Trent 1000-K2 Trent 1000-N3
Trent 1000-L2 Trent 1000-P3
Trent 1000-Q3
Trent 1000-R3
TE.CERT.00052-001 © European Aviation Safety Agency, 2017. All rights reserved. ISO9001 Certified. Page 1 of 24
Proprietary document. Copies are not controlled. Confirm revision status through the EASA-Internet/Intranet.
An agency of the European Union

TCDS No.: E.036 Type
Intentionally left blank

TABLE OF CONTENTS
I. General ..................................................................................................................................... 4
1. Type/ Model......................................................................................................................... 4
2. Type Certificate Holder ......................................................................................................... 4
3. Manufacturer ....................................................................................................................... 4
4. Date of Application ............................................................................................................... 4
5. Certification Reference Date ................................................................................................. 5
6. EASA Type Certification Date ................................................................................................ 5
II. Certification Basis ..................................................................................................................... 6
1. EASA Certification Basis ........................................................................................................ 6
1.1. Airworthiness Standards.......................................................................................................... 6
1.2. Special Conditions (SC) ............................................................................................................ 6
1.4. Deviations ................................................................................................................................ 7
1.5. Environmental Protection........................................................................................................ 7
III. Technical Characteristics .......................................................................................................... 7
1. Type Design Definition .......................................................................................................... 7
2. Description ........................................................................................................................... 8
3. Equipment............................................................................................................................ 9
4. Dimensions .......................................................................................................................... 9
5. Dry Weight ........................................................................................................................... 9
6. Ratings ............................................................................................................................... 10
7. Control System ................................................................................................................... 11
8. Fluids (Fuel, Oil, Coolant, Additives) .................................................................................... 12
9. Aircraft Accessory Drives .................................................................................................... 12
10. Maximum Permissible Air Bleed Extraction ....................................................................... 12
IV. Operating Limitations ............................................................................................................ 13
1. Temperature Limits ............................................................................................................ 13
1.1 Climatic Operating Envelope .................................................................................................. 13
1.2 Turbine Gas Temperature – Trimmed (°C) ............................................................................. 13
1.3 Fuel temperature (°C) ............................................................................................................. 13
1.4 Oil temperature (°C) ............................................................................................................... 14
2. Pressure Limits ................................................................................................................... 16
2.1 Fuel pressure (kPa) ................................................................................................................. 16
2.2 Oil pressure (kPa) .................................................................................................................... 17
3. Maximum Permissible Rotor Speeds: ................................................................................. 18
4. Installation Assumptions:.................................................................................................... 20
5. Time Limited Dispatch: ....................................................................................................... 20
6. ETOPS Capability: ............................................................................................................... 20
V. Operating and Service Instructions ......................................................................................... 21
VI. Notes .................................................................................................................................... 22
SECTION: ADMINISTRATIVE ........................................................................................................ 24
I. Acronyms and Abbreviations ............................................................................................... 24
II. Type Certificate Holder Record............................................................................................ 24
III. Change Record .................................................................................................................. 24

I. General
1. Type/ Model
Trent 1000-A, Trent 1000-C, Trent 1000-D, Trent 1000-E, Trent 1000-G, Trent 1000-H
Engines incorporating SB 72-G319 are identified by Build Standard “/01”.

Engines incorporating SB 72-G893 are identified by Build Standard “/01A”.
Trent 1000-AE, Trent 1000-CE
These engines incorporate SB 72-G319 within the DIS minimum Type Design Definition.
Engines incorporating SB 72-G893 are identified by Build Standard “/01A”
Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2,
Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2, Trent 1000-L2
Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3,
Trent 1000-J3, Trent 1000-K3, Trent 1000-L3, Trent 1000-M3, Trent 1000-N3, Trent 1000-P3,
Trent 1000-Q3, Trent 1000-R3
These engine models are approved for use on Large Aeroplanes at the ratings and within the
operating limitations specified below, subject to compliance with the powerplant installation
requirements appropriate to approved installations.
2. Type Certificate Holder
Rolls-Royce plc
PO Box 31
Derby DE24 8BJ
United Kingdom
DOA ref.: EASA.21J.035
3. Manufacturer
Rolls-Royce plc
4. Date of Application
Engine Models
Application Date: 30 April 2004

Engine Models
Trent 1000-A2, Trent 1000-C2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2,
Trent 1000-J2, Trent 1000-K2, Trent 1000-L2
Application Date : 16 May 2012
Engine Models
Trent 1000-AE, Trent 1000-CE, Trent 1000-AE2, Trent 1000-CE2
Application Date: 28 March 2014
Engine Models
Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3,
Trent 1000-K3, Trent 1000-L3, Trent 1000-M3, Trent 1000-N3, Trent 1000-P3, Trent 1000-Q3,
Trent 1000-R3
Application Date: 22 November 2013
5. Certification Reference Date
30 September 2004
6. EASA Type Certification Date
Engine Models
07 August 2007
Engine Models
Trent 1000-A2, Trent 1000-C2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2,
Trent 1000-J2, Trent 1000-K2, Trent 1000-L2
10 September 2013
Engine Models
Trent 1000-AE, Trent 1000-CE, Trent 1000-AE2, Trent 1000-CE2
06 May 2015

Engine Models
Trent 1000-R3
11 July 2016
II. Certification Basis
1. EASA Certification Basis
1.1. Airworthiness Standards
For all Models
• CS-E: original issue, dated 24 October 2003

• Time Limited Dispatch: CS-E 1030 amendment 3
• ETOPS: CS-E 1040 amendment 3
1.2. Special Conditions (SC)
none
1.3. Equivalent Safety Findings
For all models
• CS-E 740 150 Hour Endurance Test

• CS-E 740(f) Non declaration or display of Maximum Continuous
Speed Limitation
• CS-E 790 Ingestion of Rain and Hail
Engine models
Trent 1000-AE, Trent 1000-CE, Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2,
Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2,
Trent 1000-L2, Trent 1000-AE3, Trent 1000-CE3, Trent 1000- D3, Trent 1000-G3, Trent 1000-H3,
Trent 1000-J3, Trent 1000-K3, Trent 1000-L3, Trent 1000- M3, Trent 1000-N3, Trent 1000-P3,
 CS-E840 and CS-E 850 HP Shaft Prime Reliability
Engine models
Trent 1000-AE3, Trent 1000-CE3, Trent 1000- D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3,
Trent 1000-K3, Trent 1000-L3, Trent 1000- M3, Trent 1000-N3, Trent 1000-P3, Trent 1000-Q3,
Trent 1000-R3

 CS-E 740 (e) and (f) (4) (v) Oil system limits
 CS-E 740 (f)(1) Supplementary test to CS-E 740 for higher rotational
N3 limitation
1.4. Deviations
none
1.5. Environmental Protection
Engine Models
Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000-CE, Trent 1000-D, Trent 1000-E,
Trent 1000-G, Trent 1000-H
• Emissions and Fuel venting: ICAO Annex 16, Volume II, Part III (3rd Edition, July
2008), Amendment 6
Engine Models
Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2,
Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2, Trent 1000-L2
 Emissions and Fuel Venting: ICAO Annex 16, Volume II, Parts II & III (3rd Edition,
July 2008), Amendment 7 dated 17 November 2011
Engine Models
Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000- J3,
Trent 1000-K3, Trent 1000-L3, Trent 1000-M3, Trent 1000-N3, Trent 1000-P3, Trent 1000- Q3,
Trent 1000-R3
 Emissions and Fuel Venting: CS-34 Amendment 2 as implemented by ED Decision

2016/001/R (12th January 2016); ICAO Annex 16 Volume II, Amendment 8 (1st January 2015);
NOx levels in compliance with Part III, Chapter 2, paragraph 2.3.2e) (CAEP/8) of the above
mentioned Annex.
III. Technical Characteristics
1. Type Design Definition
The minimum standard of Engine Type Design for operation in accordance with the Trent 1000 Type
Certificate Data Sheet are defined in the following documents:
Model Engine Type Definition

Trent 1000-A DIS 2286 Issue 3
Trent 1000-AE DIS 2374 Issue 1

Model Engine Type Definition

Trent 1000-C DIS 2287 Issue 3
Trent 1000-CE DIS 2375 Issue 1
Trent 1000-D DIS 2288 Issue 3
Trent 1000-E DIS 2289 Issue 3
Trent 1000-G DIS 2291 Issue 3
Trent 1000-H DIS 2292 Issue 3
Trent 1000-A2 DIS 2327 issue 3
Trent 1000-AE2 DIS 2376 Issue 1
Trent 1000-C2 DIS 2328 issue 3
Trent 1000-CE2 DIS 2377 Issue 1
Trent 1000-D2 DIS 2329 issue 3
Trent 1000-E2 DIS 2330 issue 3
Trent 1000-G2 DIS 2331 issue 3
Trent 1000-H2 DIS 2332 issue 3
Trent 1000-J2 DIS 2333 issue 3
Trent 1000-K2 DIS 2334 issue 3
Trent 1000-L2 DIS 2335 issue 3
Trent 1000-AE3 DIS 2372 issue 3
Trent 1000-CE3 DIS 2373 issue 3
Trent 1000-D3 DIS 2357 issue 3
Trent 1000-G3 DIS 2360 issue 3
Trent 1000-H3 DIS 2361 issue 3
Trent 1000-J3 DIS 2362 issue 3
Trent 1000-K3 DIS 2363 issue 3
Trent 1000-L3 DIS 2364 issue 3
Trent 1000-M3 DIS 2365 issue 3
Trent 1000-N3 DIS 2367 issue 3
Trent 1000-P3 DIS 2368 issue 3
Trent 1000-Q3 DIS 2370 issue 3
Trent 1000-R3 DIS 2369 issue 3
Changes to the Engine Type Design are introduced by approved Service Bulletins (SB). See note 12.
2. Description
The Trent 1000 engine is a three shaft high bypass ratio, axial flow, turbofan with Low Pressure,
Intermediate Pressure and High Pressure Compressors driven by separate turbines through coaxial
shafts. The LP Compressor fan diameter is 2.85m with a swept fan blade and OGV’s. The combustion
system consists of a single annular combustor with 18-off fuel spray nozzles.
The LP and IP assemblies rotate independently in an anti-clockwise direction, the HP assembly
rotates clockwise, when viewed from the rear of the engine. The Compressor and Turbine have the
following features:
Compressor Turbine
LP – Single stage LP – 6 stage

IP – 8 stage IP – single stage
HP – 6 stage HP – single stage

The engine control system utilises an EEC (Electronic Engine Controller) which has an airframe
interface for digital bus communications. An EMU (Engine Monitor Unit) is fitted (to provide vibration
signals to the aircraft).
3. Equipment
For details of equipment included in the type design definition: refer to Installation Manual.
For details of equipment and nacelle hardware supplied by the Airframe TC holder that may be
mounted on or driven by the engine: refer to Installation Manual.
Note: The engine is certified for use with an operable Thrust Reverser Unit. Note that the Thrust
Reverser Unit does not form part of the engine type design and is certified as part of the
aircraft type design.
4. Dimensions
Overall Length mm (ins) 4771 (187.8)

Maximum Radius mm (ins) 1899 (74.8)
Length - tip of spinner to rear of the tail bearing housing inner plug flange
Radius - from centre line, not including drains mast
5. Dry Weight
Engine Models
Without SB 72-G319 5936

Maximum dry engine weight (kg)
With SB 72-G319 6033
Including nacelle EBU items certified as part of the engine but not including fluids.
Engine Models
Maximum dry engine weight (kg) 6033
Including nacelle EBU items certified as part of the engine but not including fluids
Engine Models

Including nacelle EBU items certified as part of the engine but not including fluids
Engine Models
Trent 1000-R3
Including nacelle EBU items certified as part of the engine but not including fluids.
6. Ratings
The ISA sea-level static thrust ratings are:
Rating Trent 1000-A Trent 1000-AE Trent 1000-C Trent 1000-CE

Thrust, Take-Off (net)
307.8 (69,194) 307.8 (69,194) 331.4 (74,511) 331.4 (74,511)
kN (lbf) (5 minutes)
Equivalent Bare
310.9 (69,885) 310.9 (69,885) 334.7 (75,239) 334.7 (75,239)
Engine Take-Off
Maximum
287.9 (64,722) 287.9 (64,722) 309.3 (69,523) 309.3 (69,523)
Continuous (net)
Equivalent Bare
Engine
290.8 (65,382) 290.8 (65,382) 312.3 (70,217) 312.3 (70,217)
Maximum
Continuous
Trent 1000-AE Trent 1000-CE
Trent 1000 AE2 Trent 1000-CE2
Applicable Engine Models Trent 1000-A Trent 1000-C
Trent 1000-A2 Trent 1000-C2
Trent 1000-AE3 Trent 1000-CE3
Rating Trent 1000-D Trent 1000-E Trent 1000-G Trent 1000-H

331.4 (74,511) 265.3 (59,631) 320.6 (72,066) 284.2 (63,897)
Equivalent Bare
334.7 (75,239) 268.0 (60,253) 323.7 (72,777) 287.1 (64,551)
Engine Take-Off
Maximum
309.3 (69,523) 261.8 (58,866) 287.9 (64,722) 261.8 (58,866)
Continuous (net)
Equivalent Bare
Engine Maximum 312.3 (70,217) 264.6 (59,481) 290.8 (65,382) 264.6 (59,481)
Continuous
Trent 1000-D Trent 1000-E Trent 1000-G Trent 1000-H
Applicable Engine Models Trent 1000-D2 Trent 1000-E2 Trent 1000-G2 Trent 1000-H2
Trent 1000-D3 Trent 1000-G3 Trent 1000-H3

Rating Trent 1000-J Trent 1000-K Trent 1000-L Trent 1000-M

347.5 (78,129) 347.5 (78,129) 331.4 (74,511) 354.6 (79,728)
Equivalent Bare
350.9 (78,886) 350.9 (78,886) 334.7 (75,239) 358.1 (80,494)
Engine Take-Off
Maximum
Continuous 319.5 (71,818) 319.5 (71,818) 309.3 (69,523) 323.3 (72,691)
(net)
Equivalent Bare
Engine
322.6 (72,519) 322.6 (72,519) 312.3 (70,217) 326.5 (73,409)
Maximum
Continuous
Trent 1000-J2 Trent 1000-K2 Trent 1000-L2 Trent 1000-M3
Applicable Engine Models
Trent 1000-J3 Trent 1000-K3 Trent 1000-L3
Rating Trent 1000-N Trent 1000-P Trent 1000-Q Trent 1000-R

Thrust, Take-Off (net) 354.6
331.4 (74,511) 347.5 (78,129) 360.4 (81,028)
kN (lbf) (5 minutes) (79,728)
Equivalent Bare 358.1
334.7 (75,239) 350.9 (78,886) 363.9 (81,802)
Engine Take-Off (80,494)
Maximum
323.3
Continuous 309.3 (69,523) 319.5 (71,818) 323.3 (72,691)
(72,691)
(net)
Equivalent Bare
Engine 326.5
312.3 (70,217) 322.6 (72,519) 326.5 (73,409)
Maximum (73,409)
Continuous
Applicable Engine Models Trent 1000-N3 Trent 1000-P3 Trent 1000-Q3 Trent 1000-R3
Refer to Section VI Notes 1, 2 and 3.
The Trent 1000-A and Trent 1000-C engine models have the option to include enhanced ratings that
are incorporated by Service Bulletins 73-H046 and 73-H093 respectively. These two ratings become
Trent 1000-AE (SB 73-H046) and Trent 1000-CE (SB 73-H093).
7. Control System
The engine is equipped with a Full Authority Digital Engine Control (FADEC) system and an Engine
Monitoring Unit (EMU).
Refer to the Installation Manual and Operating Instructions for further information.
Refer to Section VI Notes 4 and 5.

8. Fluids (Fuel, Oil, Coolant, Additives)
8.1. Fuel and Additives
Refer to the Operating Instructions for information on approved fuel and additive specifications.
8.2. Oil
Refer to the Operating Instructions for information on approved oil specifications.
9. Aircraft Accessory Drives
The engine’s accessory gearbox may be fitted with two Variable Frequency Starter Generators (VFSG)
and one Hydraulic Pump to provide electrical and hydraulic power to the aircraft. These units are
part of the airframe, and certified under Aircraft Airworthiness Standards. The Engine Installation
Manual details installation and operational requirements, including torque and power limitations.
10. Maximum Permissible Air Bleed Extraction
The Trent 1000 does not supply compressor air for airframe ventilation (Cabin Bleed), but does
supply compressor air for the purpose of preventing ice build-up on the engine nacelle (Cowl
Thermal Anti-Ice (CTAI)).
The nacelle thermal anti-icing flow demand is modulated via a regulating valve.
10.1 Cowl Thermal Anti-Icing Bleed Off takes for Normal and Abnormal operation
Engine Models:
Trent 1000-G, Trent 1000-H, Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2,
Trent 1000-L2
Engine Power Setting Maximum Cowl Thermal Anti Ice Flow

TET (K) % Core Mass Flow (W26)
Idle to 1430 2.67
1430 to 1785 2.67 to 1.25 varying linearly
1820 and above 0.54
“W26” represents the air mass flow through the core of the engine.

Engine Models
Trent 1000-R3
Engine Power Setting Maximum Cowl Thermal Anti Ice Flow

TET (K) % Core Mass Flow (W26)
Idle to 1015 2.9
Above 1810 0.5
IV. Operating Limitations
1. Temperature Limits
1.1 Climatic Operating Envelope
The engine may be used in ambient temperatures up to ISA +40°C. Refer to the Installation Manual
for details of the Operating Envelope, including the air inlet distortion at the engine inlet.
1.2 Turbine Gas Temperature – Trimmed (°C)
Maximum during ground starts and shutdown: 700

Maximum during in-flight relights 900
Maximum for take-off (5 min. limit): 900
Maximum Continuous (unrestricted duration): 850
Maximum over-temperature (20 second limit): 920
Refer to Section VI Notes 6 and 7.
1.3 Fuel temperature (°C)
Engine Models
Trent 1000-G, Trent 1000-H, Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2,
Trent 1000-L2
Minimum fuel temperature: minus 45

Maximum fuel temperature: 65
Refer to the Installation Manual for additional information.

Engine Models
Trent 1000-R3
Minimum fuel temperature before start: minus 54

Minimum fuel temperature for engine acceleration: minus 45
Maximum fuel temperature: 65
1.4 Oil temperature (°C)
Combined oil scavenge temperature:
Engine Models
Without SB With SB
Limit Fuel Inlet Temperature
72-G319 72-G319
Minimum for engine starting Minus 40 -
For fuel inlet temperature
40
minus 23°C and higher
Minimum for acceleration to
For fuel inlet temperature
power
Varies linearly from 40 to 77 between minus 23°C and
minus 45°C
Maximum for unrestricted use 196 193 -
Maximum transient (15 minutes) 205 201 -

Engine Models
Trent 1000-L2
Minimum for engine starting Minus 40
40 For fuel inlet temperature

minus 23°C and higher
Varies linearly For fuel inlet temperature
power
from 40 to 77 between minus 23°C and
minus 45°C
Maximum for unrestricted use 193
Maximum transient (15 minutes) 201
Engine Models
Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3,
Trent 1000-J3, Trent 1000-K3, Trent 1000-L3, Trent 1000-M3, Trent 1000-N3, Trent 1000-P3,
Minimum for engine starting Minus 40
40 For fuel inlet temperature

minus 23°C and higher.
Varies linearly from For fuel inlet temperature
power
40 to 77 between minus 23°C and
minus 45°C.
Maximum for unrestricted use 196
Maximum transient (15 minutes) 201

2. Pressure Limits
2.1 Fuel pressure (kPa)
Minimum absolute inlet pressure (measured at engine inlet):
kPa psi
Steady state conditions 34.5 + Vapour 5 + Vapour
with engine running: Pressure Pressure
Transient conditions with

13.8 + Vapour
engine running 2 + Vapour
Pressure
(2 seconds): Pressure
For engine operation with the aircraft boost pumps inoperative the engine minimum fuel pressure
limit is reduced down to 3.4 psi at altitudes of up to 35000 feet for up to 600 minutes.
Maximum pressure at inlet (measured at the pylon interface):
kPa psi
Steady state conditions
483 70
with engine running:
Transient conditions with
966 140
engine running (2 seconds):
Static after engine shut
1172 170
down:

2.2 Oil pressure (kPa)
Minimum oil pressure:
Engine Models
Without SB 72-G319 With SB 72-G319
kPa psi kPa psi
Ground idle to 74% IP rpm 207 30 207 30
Between 74% and 100% IP Varies linearly Varies linearly Varies linearly Varies linearly
rpm from 207 to 517 from 30 to 75 from 207 to 621 from 30 to 90
Above 100% IP rpm 517 75 621 90
Engine Models
Trent 1000-L2
kPa psi
Ground idle to 74% IP
207 30
rpm
Between 74% and 100% Varies linearly
Varies linearly from 207 to 621
IP rpm from 30 to 90
Above 100% IP rpm 621 90

Engine Models
Trent 1000-R3
kPa Psi
Ground idle to 74% IP
207 30
rpm
Between 74% and Varies linearly
Varies linearly from 207 to 621
100% IP rpm from 30 to 90
Above 100% IP rpm 621 90
See note 13
3. Maximum Permissible Rotor Speeds:
When maintenance running is performed above idle thrust with the aircraft static, the control system
automatically applies a temperature dependent LP speed Keep Out Zone. Refer to the Maintenance
Manual for details.
Engine Models
Rotor HP IP LP
Reference speeds, 100% rpm 13391 8937 2683
Maximum for Take-off
98.6% 100.8% 101.4%
(5 minute limit, refer to Section VI Note 3)
Without
SB 72-G319 Maximum Continuous
97.8% 99.5% 101.4%
(refer to Section VI Note 8)
Maximum for Take-off

With 100.2% 103.5% 101.5%
(5 minute limit, refer to Section VI Note 3 and 11)
SB 72-G319
Maximum Continuous
99.2% 100.8% 101.5%
(refer to Section VI Note 8 and 11)
(Data makes allowance for instrumentation accuracies)
For engines without SB 72-G319, LP speed must not exceed 96.5% during any aircraft operation with
an apparent tailwind, ie tailwind greater than aircraft forward speed. This limitation does not apply
to an engine with SB 72-G319.

Engine Models
Rotor HP IP LP
Maximum for Take-off 100.2 % 103.5% 101.5%
(5 minute limit, refer to Section VI, note 3and 11)
Maximum Continuous 99.2% 100.8% 101.5%
(Refer to Section VI, note 8 and 11)
Engine Models
Rotor HP IP LP
Maximum for Take-off 101.0% 103.5% 101.5%
(5 minute limit, refer to Section VI, note 3)
(Refer to Section VI, note 8)
Engine Models
Trent 1000-R3
Rotor HP IP LP
Maximum for Take-off 101.5% 103.5% 101.5%
(5 minute limit, refer to Section VI, note 3)
(Refer to Section VI, note 8)

4. Installation Assumptions:
Refer to Installation Manual for details.
5. Time Limited Dispatch:
All Engine Models
These engine models have been approved for Time Limited Dispatch in accordance with CS-E 1030.
The maximum rectification period for each dispatchable state is specified in the Installation Manual.
6. ETOPS Capability:
All Engine Models
These engine models are approved for ETOPS capability in accordance with CS-E 1040 for a Maximum
Approved Diversion Time of 330 minutes at MCT thrust plus 15 minutes at hold power. ETOPS does
not require any special engine limitation, marking, placard, or configuration. This approval does not
constitute an approval to conduct ETOPS operations

V. Operating and Service Instructions
Engine Models
Trent 1000-A, Trent 1000 AE, Trent 1000-C, Trent 1000-CE, Trent 1000-D, Trent 1000-E,
Trent 1000-G, Trent 1000-H
Document Document Reference

Installation Manual DNS 130613
including Engine Control System
Dispatch Statement
Operating Instructions OI-Trent 1000-B787
Engine Manual E-Trent-10RR
Maintenance Manual B787-81205-Axxxx
Time Limits Manual T-Trent-10RR
(for engines without SB 72-G319 fitted)
Time Limits Manual T-Trent-10RRB

(for engines with SB 72-G319 fitted)
Service Bulletins Trent 1000 — as required
Note: The Maintenance Manual is compiled by the Airframer and is specific to Aircraft Operators,
“xxxx” denotes the Airlines customer code.
Engine Models

Installation Manual DNS193530
including Engine Control System
Dispatch Statement
Operating Instructions OI-Trent 1000-B787C1
Engine Manual E-Trent-10RRC
Time Limits Manual T-Trent-10RRC
Service Bulletins Trent 1000 — as required

Engine Models
Trent 1000-R3

Installation Manual EDNS01000566257
Operating Instructions OI-Trent 1000-TEN-B787

Engine Manual E–Trent–10RRT
Time Limits Manual T-Trent-10RRT
Service Bulletins Trent 1000 - as required
VI. Notes
1. The Equivalent Bare Engine Take-off and Maximum Continuous thrusts quoted in Section III sub
level 6 are derived from the approved Net Take-off and Net Maximum Continuous thrust by
excluding the losses attributable to the inlet, cold nozzle, hot nozzle, by-pass duct flow leakage
and the after body.
2. The Ratings are based on having no power offtakes to aircraft accessories. MTO ratings are
based on having no air bleed for Cowl Thermal Anti Icing (CTAI) but MCT ratings include the
effect of CTAI.
3. The take-off rating and the associated operating limitations may be used for up to 10 minutes in
the event of an engine failure.
4. The control and monitoring system software meets the following levels according to EUROCAE
ED-12B/RTCA DO178B:
• EEC is designated Level “A”.
• EMU is designated Level “E”, except that the flight deck vibration display is Level “C”.
5. Refer to Installation Manual for details of Electro-Magnetic Interference (EMI), High Intensity
Radiated Fields (HIRF) and Lightning capability.
6. The maximum exhaust gas over temperature limit is approved for inadvertent use for the
periods specified without requiring maintenance action. The cause of the over temperature
must be investigated and corrected.
7. Turbine Gas Temperature is measured by thermocouples positioned at the 1st stage Nozzle
Guide Vane of the LP Turbine.

8. The Maximum Continuous Speed limitations defined in this Data Sheet are not displayed as
limitations on the Aircraft flight deck. Non-display of these limitations was agreed during the
certification programme.
9. The Trent 1000-Z Model approved at original certification was deleted at Issue 2 of TCDS E.036.
No examples of this Model have been produced and this model is no longer required.
10. Issue 2 of TCDS E.036 also updated the minimum build standard approved under the Type
Certificate as defined in Section III paragraph 1. Only engines complying with the new minimum
build standard can be operated. Examples of the earlier build standard are no longer approved
and must be reworked to comply with the new minimum build standard prior to service
operation.
11. Trent 1000-E model Engine type definition always embodies SB 72-G319.
12. The EASA approved Airworthiness Limitations Section of the Instructions for Continued
Airworthiness is published in the applicable “Time Limits Manual”.
13. The minimum oil pressure limits defined for Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3,
Trent 1000-G3, Trent 1000-H3, Trent 1000-J3, Trent 1000-K3, Trent 1000-L3, Trent 1000-M3,
Trent 1000-N3, Trent 1000-P3, Trent 1000-Q3, Trent 1000-R3 shows trimmed/indicated kPa (psi)
to ensure cockpit display is consistent with the other engine models.

SECTION: ADMINISTRATIVE
I. Acronyms and Abbreviations
n/a
II. Type Certificate Holder Record
Rolls-Royce plc
III. Change Record
Issue Date Changes TC issue

Issue 01 07.08.2007 Initial Issue Initial Issue,
07.08.2007
Issue 02 14 March 2011 Miscellaneous modifications
Issue 03 11 November Introduction of Pack B models and miscellaneous
2011 modifications
Issue 04 10 September Introduction of Pack C models and miscellaneous
2013 modifications
Issue 05 27 March 2014 Introduction of Pack C ETOPS
Issue 06 06 May 2015 Introduction of Trent 1000-AE, Trent 1000-CE,
Trent 1000-AE2, Trent 1000-CE2 models
Issue 07 11 July 2016 Introduction of models : Trent 1000-AE3, Trent 11 July 2016
1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent
1000-H3, Trent 1000- J3, Trent 1000-K3, Trent
1000-L3, Trent 1000-M3, Trent 1000-N3, Trent
1000-P3, Trent 1000- Q3, Trent 1000-R3
Issue 08 17 August 2017 Change of DIS Issue 2 to Issue 3 for models:
Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3,
Trent 1000-G3, Trent 1000-H3, Trent 1000- J3,
Trent 1000-K3, Trent 1000-L3, Trent 1000-M3,
Trent 1000-N3, Trent 1000-P3, Trent 1000- Q3,
Trent 1000-R3,
ETOPS capacity, TLD, change of Minimum Fuel
Temperature and change of Maximum Permissible
Rotor Speeds for these models
-END-

Type-Certificate Data Sheet: An Agency of The European Union

Uploaded by

Copyright:

Available Formats

Type-Certificate Data Sheet: An Agency of The European Union

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Type-Certificate Data Sheet: An Agency of The European Union

Uploaded by

Copyright:

Available Formats

TCDS No.: E.

Type Certificate Holder

Trent 1000-A Trent 1000-A2 Trent 1000-AE3

An agency of the European Union

Intentionally left blank

An agency of the European Union

An agency of the European Union

Engines incorporating SB 72-G319 are identified by Build Standard “/01”.

Trent 1000-AE, Trent 1000-CE

2. Type Certificate Holder

DOA ref.: EASA.21J.035

Application Date: 30 April 2004

An agency of the European Union

Application Date : 16 May 2012

Trent 1000-AE, Trent 1000-CE, Trent 1000-AE2, Trent 1000-CE2

Application Date: 28 March 2014

Application Date: 22 November 2013

5. Certification Reference Date

6. EASA Type Certification Date

Trent 1000-AE, Trent 1000-CE, Trent 1000-AE2, Trent 1000-CE2

An agency of the European Union

II. Certification Basis

1. EASA Certification Basis

1.1. Airworthiness Standards

For all Models

• CS-E: original issue, dated 24 October 2003

1.2. Special Conditions (SC)

1.3. Equivalent Safety Findings

For all models

• CS-E 740 150 Hour Endurance Test

 CS-E840 and CS-E 850 HP Shaft Prime Reliability

An agency of the European Union

1.5. Environmental Protection

 Emissions and Fuel Venting: CS-34 Amendment 2 as implemented by ED Decision

III. Technical Characteristics

1. Type Design Definition

Model Engine Type Definition

An agency of the European Union

Model Engine Type Definition

LP – Single stage LP – 6 stage

An agency of the European Union

Overall Length mm (ins) 4771 (187.8)

Without SB 72-G319 5936

Trent 1000-AE, Trent 1000-CE

Maximum dry engine weight (kg) 6033

An agency of the European Union

Maximum dry engine weight (kg) 5947

Maximum dry engine weight (kg) 6114

Rating Trent 1000-A Trent 1000-AE Trent 1000-C Trent 1000-CE

Rating Trent 1000-D Trent 1000-E Trent 1000-G Trent 1000-H

An agency of the European Union

Rating Trent 1000-J Trent 1000-K Trent 1000-L Trent 1000-M

Rating Trent 1000-N Trent 1000-P Trent 1000-Q Trent 1000-R

Refer to Section VI Notes 1, 2 and 3.

An agency of the European Union

8. Fluids (Fuel, Oil, Coolant, Additives)

8.1. Fuel and Additives

Refer to the Operating Instructions for information on approved oil specifications.

9. Aircraft Accessory Drives